ZH
RU
ES

Standard peak area

Standard peak area, Total:451 items.

In the international standard classification, Standard peak area involves: Lubricants, industrial oils and related products, Construction materials, Leather technology, Occupational safety. Industrial hygiene, Lighting, Refractories, Products of the textile industry, Analytical chemistry, Nuclear energy engineering, Raw materials for rubber and plastics, Inorganic chemicals, Power transmission and distribution networks, Farming and forestry, Buildings, Road engineering, Surface treatment and coating, Vocabularies, Electronic components in general, Paper and board, Road vehicles in general, Elements of buildings, Adhesives, Linear and angular measurements, Products of the chemical industry, Construction technology, Fuels, Non-textile floor coverings, Rubber, Measurement of fluid flow, Geology. Meteorology. Hydrology, Postal services, Shipbuilding and marine structures in general, Water quality, Electrical wires and cables, Construction industry, Radiation measurements, Tyres, Equipment for entertainment, Metrology and measurement in general, Powder metallurgy, Cereals, pulses and derived products, Environmental protection, Ceramics, Power stations in general, Corrosion of metals, Optical equipment, Standardization. General rules, Processes in the food industry, Passenger and cabin equipment, Transformers. Reactors, Rubber and plastics products, Protection against dangerous goods, Paints and varnishes, Materials for aerospace construction, IT terminal and other peripheral equipment, Food products in general, Technical product documentation, Particle size analysis. Sieving, Graphic technology, Soil quality. Pedology, Manufacturing processes in the rubber and plastics industries, Protective equipment, Iron and steel products, Semiconducting materials, Optics and optical measurements, Information sciences. Publishing, Applications of information technology, Equipment for petroleum and natural gas industries, Plastics, Protection against fire, INFORMATION TECHNOLOGY. OFFICE MACHINES, Insulating materials.

American Society for Testing and Materials (ASTM), Standard peak area

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM C1407-98 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-98(2005) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM D3776/D3776M-09ae1 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D4276-02(2007) Standard Practice for Confined Area Entry
ASTM D4276-95 Standard Practice for Confined Area Entry
ASTM D4276-02 Standard Practice for Confined Area Entry
ASTM D3663-99 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D6556-19a Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-19 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D6556-03 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-09 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
ASTM B633-98 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B633-98e1 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM B699-86(2003) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM B633-15 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM C1407-98(2011)e1 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM C1407-98(2016) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM D1993-03 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-03(2013) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM B695-00 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM D3776-09 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM D3776/D3776M-20 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM B699-86(2015) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D8-21 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D3776/D3776M-09ae2 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM C946-18 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
ASTM D899-00(2018) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM B695-04(2016) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B263/B263M-04(2010)e1 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B695-04(2009) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM D3776/D3776M-09a(2013) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D8-16a Standard Terminology Relating to Materials for Roads and Pavements
ASTM D8-16 Standard Terminology Relating to Materials for Roads and Pavements
ASTM C1407-23 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
ASTM E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D6845-02(2008) Standard Test Method for Silica, Precipitated, Hydratedx2014;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B263-04(2010) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B633-13 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM D6556-17 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM E1836-01 Standard Classification for Building Floor Area Measurements for Facility Management
ASTM E1836-98 Standard Classification for Building Floor Area Measurements for Facility Management
ASTM D6242-98(2004) Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D6242-98 Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D3776-07 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D5261-10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM B263/B263M-14(2020) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM C946-10 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
ASTM B263/B263M-14 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D4780-95(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D4780-95 Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D5848-05 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D899-00(2007) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D4620-98 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D899-00 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D898-96 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D8122-21 Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings
ASTM D898-05 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D4620-02(2021) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D5626-94(2001) Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas
ASTM D5848-20 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D6566-14 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D899-00(2013) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D1993-03(2013)e1 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D4620-02 Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber
ASTM D4620-02(2012) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-17 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-18 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D3977-97 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2002) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2007) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D4531-86(1996) Standard Test Methods for Bulk Density of Peat and Peat Products
ASTM B258-18 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E2619-08 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM F870-23 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM D4780-95(2001) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM F1933-98(2004) Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
ASTM D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D5848-07 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-10 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D5848-98 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5130-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM E2109-01(2014) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM D4620-02(2017) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D5848-10e1 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D3976-22 Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM F870-94(2000) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F870-94(2016) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM D6556-16 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM B258-96 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-01 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-02 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D3765-03 Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D3765-03a Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D6556-00a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-95 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E210-63(2016) Standard Specification for Microscope Objective Thread
ASTM C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM D5993-18 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-17 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D3765-04 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM B258-14 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM B489-85(2013) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D6556-07 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM A780/A780M-09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM D3765-02 Standard Test Method for Carbon Black—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D3305-94(2005) Standard Practice for Sampling Small Gas Volume in a Transformer
ASTM D4803-18 Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM D4803-10(2018)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces
ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D4780-12 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM F2036-05e1 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM F2036-05 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM F2036-04 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM E965-96(2001) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E965-96 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM B200-85(1999) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM F2036-05(2011) Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM B200-85(2009) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM B200-85(2015) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM C715-90(2016) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D5015-95 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-02 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-15(2022) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D452/D452M-19(2022) Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D1993-91(1997) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D1993-18 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D5604-21 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D1993-22 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1829-02 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM E1829-97 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM D7163-05 Standard Test Method for Specular Gloss of Printed Matter
ASTM E1829-09 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM D7163-05(2010) Standard Test Method for Specular Gloss of Printed Matter
ASTM D7163-11 Standard Test Method for Specular Gloss of Printed Matter
ASTM C722-18 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
ASTM E3268-20 Standard Guide for NAPL Mobility and Migration in Sediment—Sample Collection, Field Screening, and Sample Handling
ASTM E3268-21 Standard Guide for NAPL Mobility and Migration in Sediment—Sample Collection, Field Screening, and Sample Handling
ASTM C1339-02 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
ASTM C133-97(2008) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM C1339/C1339M-18 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
ASTM C133-97(2021) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM C133-97(2015) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM D4698-92(2001) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D991-89(2010) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D4698-21 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D4698-92(2013) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D4698-92(2007) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM D5015-15 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM F2178/F2178M-20 Standard Specification for Arc Rated Eye or Face Protective Products
ASTM A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
ASTM A624/A624M-03 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
ASTM F2178/F2178M-22 Standard Specification for Arc Rated Eye or Face Protective Products
ASTM E1829-14 Standard Guide for Handling Specimens Prior to Surface Analysis
ASTM A624/A624M-22 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
ASTM F1620-96 Standard Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces
ASTM D8367-21 Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles
ASTM E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM C810-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM C810-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM C810-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM D5604-96(2012) Standard Test Methods for Precipitated Silicamdash;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM E1477-98a(2017) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D3975-93(2003) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM E1078-14 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM D5604-96(2006) Standard Test Methods for Precipitated Silica-Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D5604-96(2001) Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D5604-96 Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D6845-22 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D5604-96(2017) Standard Test Methods for Precipitated Silica8212;Surface Area by Single Point B.E.T. Nitrogen Adsorption
ASTM D991-89(2000)e1 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D991-89(2020) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM C559-16 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
ASTM D991-89(2014) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM F2178-06 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
ASTM F2178-08 Standard Test Method for Determining the Arc Rating and Standard Specification for Face Protective Products
ASTM E2688-18 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM D6845-20 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D6845-18 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM F2178/F2178M-23 Standard Specification for Arc Rated Eye or Face Protective Products
ASTM A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
ASTM B946-11(2016) Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
ASTM F2178/F2178M-23a Standard Specification for Arc Rated Eye or Face Protective Products

International Federation of Trucks and Engines, Standard peak area

NAVISTAR ESP X-1.201-NPP-2015 VOID - Area Standard Parts

Professional Standard - Public Safety Standards, Standard peak area

GA 223-2004 GYPSUM PANEL PRODUCTS TYPES, USES, SIZES, AND STANDARDS

Gansu Provincial Standard of the People's Republic of China, Standard peak area

DB62/T 1012-2003 Crop Variety Standard Wheat Variety Xifeng No. 25

AT-ON, Standard peak area

ONORM A 1311-1994 Large area copying machines - Selection criteria

RU-GOST R, Standard peak area

GOST 12.1.046-1985 Occupational safety standards system. Building. Lighting of building sites

CL-INN, Standard peak area

INDITECNOR 26-11ch-1955

German Institute for Standardization, Standard peak area

DIN EN ISO 25178-71:2018-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017); German version EN ISO 25178-71:2017
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN EN ISO 25178-700:2023-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022); German version EN ISO 25178-700:2023
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010
DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN-Fachbericht 54:2003 Environmental aspects - Inclusion in electrotechnical product standards; German and English version
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010); German version EN ISO 25178-602:2010
DIN CEN/TR 16928:2016-12*DIN SPEC 19646:2016-12 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering; German version CEN/TR 16928:2016
DIN-Fachbericht 108:2003 Guide for the inclusion of environmental aspects in product standardization and development; German and English Version

ES-UNE, Standard peak area

UNE-EN ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)

British Standards Institution (BSI), Standard peak area

BS EN ISO 25178-71:2017 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
20/30404177 DC BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal. Part 700. Calibration, adjustment and verification of areal topography measuring instruments
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS 7641:1993 Performance standards in building - Definition and calculation of area and space indicators
BS ISO 9836:2011 Performance standards in building. Definition and calculation of area and space indicators
BS EN 12057:2005 Natural stone products - Modular tiles - Requirements
BS EN 12057:2004 Natural stone products - Modular tiles - Requirements
BS EN 4723:2015 Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seat
PD IEC/TS 62666:2016 Guidelines for the inclusion of documentation aspects in product standards
BS 4479-9:1990 Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings
BS EN ISO 25178-71:2012 Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards
BS PD CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards. Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
BS PD IEC/TS 62666:2016 Guidelines for the inclusion of documentation aspects in product standards
BS DD IEC/TS 62666:2010 Guidelines for the inclusion of documentation aspects in product standards
BS ISO 10307-2:2009 Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing
BS EN ISO 5436-2:2012 Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards
PD ISO/TR 24699:2009 Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards

American National Standards Institute （ANSI), Standard peak area

ANSI N13.12-2013 Surface and Volume Radioactivity Standards for Clearance
ANSI/BOMA Z65.3-2009 Gross Area of a Building: Standard Methods of Measurement
BS EN ISO 9073-1:2023 Nowovens. Test methods Determination of mass per unit area (British Standard)

Jiangsu Provincial Standard of the People's Republic of China, Standard peak area

DB32/T 2167-2012 Conversion standard for the coverage area of poplar trees

Professional Standard-Ships, Standard peak area

CB/T 8501-1994 Design standards for office and living building area in the factory area

Institute of Electrical and Electronics Engineers (IEEE), Standard peak area

IEEE 274-1966 Standard Definitions of Terms for Integrated Electronics
ST 211:2001 ST 211:2001 - SMPTE Standard - Motion-Picture Film - 16- and 35-mm Variable-Area Photographic Audio Records — Signal-to-Noise Ratio

IN-BIS, Standard peak area

IS 7112-1973

未注明发布机构, Standard peak area

BS ISO 9836:2011(2013) Performance standards in building — Definition and calculation of area and space indicators

The American Road & Transportation Builders Association, Standard peak area

AASHTO M 323-2007 Standard Specification for Superpave Volumetric Mix Design
AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
AASHTO M 298-2001 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel HM-22; Part IB; ASTM Designation: B 695-00
AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO M298-1992 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel Twentieth Edition; ASTM B695-91 R(1996)
AASHTO DIVISION I 10.9 Effective Area of Angles and Tee Sections in Tension Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)

CZ-CSN, Standard peak area

CSN ON 56 2814-1964

International Organization for Standardization (ISO), Standard peak area

ISO 9836:2011 Performance standards in building - Definition and calculation of area and space indicators
ISO 9836:1992 Performance standards in building; definition and calculation of area and space indicators
ISO 9836:2017 Performance standards in building - Definition and calculation of area and space indicators
ISO 25178-607:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments
ISO Guide 64:1997 Guide for the inclusion of environmental aspects in product standards
ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions

Korean Agency for Technology and Standards (KATS), Standard peak area

KS B 0500-2008 Surface working standards of iron and steel
KS C 0921-2014(2019) Environmental aspects — Inclusion in electrotechnical product standards
KS D 0296-2019 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates
KS A ISO GUIDE 64:2010 Guide for addressing environmental issues in product standards
KS C 0921-2009 Environmental aspects-Inclusion in electrotechnical product standards
KS C 0921-2014 Environmental aspects — Inclusion in electrotechnical product standards

AASHTO - American Association of State Highway and Transportation Officials, Standard peak area

T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

VE-FONDONORMA, Standard peak area

COVENIN 957-1976

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard peak area

GB 2711-2014 National Food Safety Standard Gluten Products
GB 19295-2011 National Food Safety Standard Safety Standard for Quick-frozen and Pre-packed Food made of Wheat Flour and Rice
GB 17400-2015 National Food Safety Standard Instant Noodles
GB 15202-1994 Toleronce limit of aluminium in flour products
GB 7099-2015 National Food Safety Standard for Pastry and Bread
GB 19295-2003 Hygienic standard for quick-frozen and pre-packed food made of wheat flour and rice
GB 19295-2021 National Food Safety Standard Quick-frozen noodles and prepared food
GB 2711-1998 Hygienic standard for non-fermented bean products and gluten
GB 2711-2003 Hygienic standard for non-fermented bean products and gluten

Professional Standard - Energy, Standard peak area

DL/T 5052-2016 Standards for the construction area of auxiliary and auxiliary buildings in thermal power plants

Chongqing Provincial Food Standard of the People's Republic of China, Standard peak area

DBS50/ 028-2017 Local Food Safety Standard Seasoned Flour Products

IX-FAO, Standard peak area

CODEX STAN 118-1981,Amended 1983(Ch) Codex Alimentarius Standard Gluten-Free Foods
CODEX STAN 118-1981(En) Codex Alimentarius Standard Gluten-Free Foods
CODEX STAN 249-2006(En) International Codex Alimentarius Standard Instant Noodles
CODEX STAN 249-2006(Ch) International Codex Alimentarius Standard Instant Noodles
CODEX STAN 170-1989,Rev.1-1995(Ch) International Codex Alimentarius Standard Pearl Barnyard Powder (Millet Noodles)
CODEX STAN 170-1989(En) International Codex Alimentarius Standard Pearl Barnyard Powder (Millet Noodles)
CODEX STAN 163-1987,Rev.1-2001(Ch) Codex Alimentarius Standard for Wheat Protein Products Including Wheat Gluten
CODEX STAN 163-1987(En) Codex Alimentarius Standard for Wheat Protein Products Including Wheat Gluten
CODEX STAN 166-1989(En) Codex Alimentarius Standard Quick Frozen Breaded or Batter-Based Fish Nuggets and Fillets
CODEX STAN 166-1989,Rev.2-2004(Ch) Codex Alimentarius Standard Quick Frozen Breaded or Batter-Based Fish Nuggets and Fillets

Professional Standard - Traffic, Standard peak area

CBJ 7-1986 Interim standard for the design of office and living building area of industrial enterprise factory area

Professional Standard - Commodity Inspection, Standard peak area

SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density

Xinjiang Provincial Standard of the People's Republic of China, Standard peak area

DB65/ 301-1999 Textile fabrics; general standard for product labeling of knitwear and clothing

BE-NBN, Standard peak area

NBN-ISO 9836:1992 Performance standards in building - Definition and calculation of area and space indicators
NBN B 27-011-1983
NBN B 27-011 ADD 1-1987

ESD - ESD ASSOCIATION, Standard peak area

STM11.12-2000 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

Professional Standard - Agriculture, Standard peak area

药典14-2015 Letter on Corrigendum to the Contents of the Drug Standards of "Shugan Xiaoji Pills"
DBS50/ 030-2023 Food Safety Local Standard Chongqing Small Noodles

Association Francaise de Normalisation, Standard peak area

NF B10-616:2005 Natural stone products - Modular tiles - Requirements.
NF B10-616*NF EN 12057:2015 Natural stone products - Modular tiles - Requirements
NF P34-302*NF EN 501:1994 Roofing products from metal sheet. Specification for fully supported roofing products of zinc sheet.
NF L17-420*NF EN 2557:1997 Aerospace series. Carbon fibre preimpregnates. Determination of mass per unit area.
FD P16-928*FD CEN/TR 16928:2017 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
NF EN ISO 25178-71:2017 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 71 : étalons logiciels
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
FD CEN/TR 16928:2017 Lignes directrices pour la mise en oeuvre des aspects environnementaux dans les normes de produits et les normes de systèmes du domaine de la technique des eaux résiduaires
NF EN ISO 5436-2:2012 Spécification géométrique des produits (GPS) - État de surface : méthode du profil - Étalons - Partie 2 : étalons logiciels

European Committee for Standardization (CEN), Standard peak area

EN 12057:2015 Natural stone products - Modular tiles - Requirements
EN ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
PD CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering
CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering

Ningxia Provincial Standard of the People's Republic of China, Standard peak area

DB64/T 799-2012 Halal (HALAL) noodle food processing general standard

Shaanxi Provincial Food Standard of the People's Republic of China, Standard peak area

DBS61/ 0011-2021 Food Safety Local Standard Liangpi and Cold Noodles
DBS61/ 0011-2016 Food Safety Local Standard Liangpi and Cold Noodles

Qinghai Provincial Food Standard of the People's Republic of China, Standard peak area

DBS63/ 0005-2022 Food safety local standard highland barley flour

TH-TISI, Standard peak area

TIS 121.12-2010 Standard test methods for textiles.part 12: woven fabrics.determination of mass per unit length and mass per unit area

Professional Standard - Electricity, Standard peak area

DL/T 5052-1996 Standard for auxiliary,ancillary,living and welfare building's area for fossil fuel power plant
DL/T 5052-1996（条文说明） Standard for auxiliary, ancillary, living and welfare building's area for fossil fuel power plant(explanation)

Taiwan Provincial Standard of the People's Republic of China, Standard peak area

CNS 14064-2006 Guide for the inclusion of environmental aspects in product standards
CNS 14064-2-2021 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1997 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1-2021 Guide for the inclusion of environmental aspect in product standards

Guizhou Provincial Food Standard of the People's Republic of China, Standard peak area

DBS52/ 011-2016 Food Safety Local Standard Guizhou Chili Noodles

CN-STDBOOK, Standard peak area

图书 3-8876 China food industry standard compilation quick-frozen rice noodle food roll

PT-IPQ, Standard peak area

I-1622-1981

Danish Standards Foundation, Standard peak area

DS/EN 2331:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area
DS/IEC TS 62666:2011 Guidelines for the inclusion of documentation aspects in product standards

CEN - European Committee for Standardization, Standard peak area

EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss
EN ISO 5436-2:2001 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 2: Software Measurement Standards

International Electrotechnical Commission (IEC), Standard peak area

IEC GUIDE 109:1995 Environmental aspects - Inclusion in electrotechnical product standards
IEC TR 62139:2004 Guidelines for the addition of environmental aspects in product standards specific to TC 23
IEC TS 62666:2010 Guidelines for the inclusion of documentation aspects in product standards
IEC TS 62666:2016 Guidelines for the inclusion of documentation aspects in product standards
IEC Guide 109:2012 Environmental aspects - Inclusion in electrotechnical product standards

KR-KS, Standard peak area

KS C IEC TS 62666-2023 Guidelines for the inclusion of documentation aspects in product standards

Group Standards of the People's Republic of China, Standard peak area

T/WBPP 0602-2019 Processing Standards of Wubao Handmade Hollow Dried Noodles

US-CPSC, Standard peak area

CPSC 16 CFR PT 1630-2010 STANDARD FOR THE SURFACE FLAMMABILITY OF CARPETS AND RUGS (FF 1-70)

IX-EU/EC, Standard peak area

M 401-2007 Standardisation mandate to CEN for the creation of a European standard on volumetric flow from stationary sources in the field of air emissions

PL-PKN, Standard peak area

PN P04824-1991 Textiles. Classification criteria for curtain articles in regard to flammability

生产经营规范, Standard peak area

GB 8957-2016 National Food Safety Standard Pastry and Bread Hygienic Specifications

IEC - International Electrotechnical Commission, Standard peak area

TS 62666-2010 Guidelines for the inclusion of documentation aspects in product standards (Edition 1.0)
TS 62666-2016 Guidelines for the inclusion of documentation aspects in product standards (Edition 2.0)

Underwriters Laboratories (UL), Standard peak area

UL 5800 BULLETIN-2018 UL Standard for Safety Technical Panel for Battery Fire Containment Products

Hubei Provincial Food Standard of the People's Republic of China, Standard peak area

DBS42/ 005-2022 Food Safety Local Standard Wuhan Hot Dry Noodles (Convenient Type)
DBS42/ 005-2021 Food Safety Local Standard Wuhan Hot Dry Noodles (Convenient Type)

Hunan Provincial Food Standard of the People's Republic of China, Standard peak area

DBS43/ 008-2018 Food Safety Local Standards Hygienic Specifications for Production of Wet Noodles

Gansu Provincial Food Standard of the People's Republic of China, Standard peak area

DBS62/ 003-2020 Local Food Safety Standard Lanzhou Beef Noodles (cooking type)

API - American Petroleum Institute, Standard peak area

API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume

AENOR, Standard peak area

UNE 55539-14:1995 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULLATIONS CONTAINING THEM. PART 14: STANDARD SOLUTIONS WITH BUFFERED PH.

RO-ASRO, Standard peak area

STAS 11077-1990 Textile colour fastness tests. Woollen standard fabric

KE-KEBS, Standard peak area

KS 08-120-1981 KENYA STANDARD METHOD FOR DETERMINATION OF MASS PER UNIT LENGTH AND MASS PER UNIT AREA OF WOVEN OR KNITTED FABRICS

Heilongjiang Provincial Food Standard of the People's Republic of China, Standard peak area

DBS23/ 012-2021 Food Safety Local Standards Hygienic Specifications for Small Workshop Production of Raw and Wet Noodle Products

Professional Standard - Chemical Industry, Standard peak area

HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

PK-PSQCA, Standard peak area

PS 118-1960 PAKISTAN STANDARD SPECIFICATION FOR DETERMINING THE IRREGULARITY OF YARN BY VARIABILITIES OF 1-INCH WEIGHTS

Canadian Standards Association (CSA), Standard peak area

CSA ISO GUIDE 64-98-CAN/CSA:1998 Guide for the Inclusion of Environmental Aspects in Product Standards First Edition

Shandong Provincial Standard of the People's Republic of China, Standard peak area

DB37/T 1680-2010 Environment-friendly product quality standard decorative flocking fabric