ZH
RU
ES

Peak area standard content

Peak area standard content, Total:218 items.

In the international standard classification, Peak area standard content involves: Lubricants, industrial oils and related products, Measurement of volume, mass, density, viscosity, Products of the textile industry, Buildings, Products of the chemical industry, Earthworks. Excavations. Foundation construction. Underground works, Leather technology, Adhesives, Vocabularies, Road engineering, Farming and forestry, Measurement of fluid flow, Standardization. General rules, Water quality, Linear and angular measurements, Surface treatment and coating, Metrology and measurement in general, Paper and board, Construction materials, Non-textile floor coverings, Geology. Meteorology. Hydrology, Postal services, Materials for aerospace construction, Inorganic chemicals, Construction industry, Radiation measurements, Nuclear energy engineering, Tyres, Soil quality. Pedology, Waxes, bituminous materials and other petroleum products, Passenger and cabin equipment, Air quality, Paints and varnishes, Non-destructive testing, Physics. Chemistry, Protection of and in buildings, Rubber, Rubber and plastics products, Analytical chemistry.

American Society for Testing and Materials (ASTM), Peak area standard content

ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D3776-09 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-20 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D3776/D3776M-09ae2 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2013) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D4381-84(2006) Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM D4381/D4381M-22 Standard Test Method for Sand Content by Volume of Construction Slurries
ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D3776/D3776M-09ae1 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-07 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D5261-10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D4381-06 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM D4381/D4381M-12 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D8-21 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D899-00(2018) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D8-16a Standard Terminology Relating to Materials for Roads and Pavements
ASTM D8-16 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D6566-14 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D932-85(2009) Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
ASTM E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
ASTM B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D6566-17 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-18 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D932-85(2002) Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
ASTM E1836-01 Standard Classification for Building Floor Area Measurements for Facility Management
ASTM E1836-98 Standard Classification for Building Floor Area Measurements for Facility Management
ASTM D6242-98(2004) Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D6242-98 Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM C173/C173M-10a Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-10b Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM D5848-05 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D899-00(2007) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D899-00 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D898-96 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D8122-21 Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings
ASTM D898-05 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D5626-94(2001) Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas
ASTM D5848-20 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D899-00(2013) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM D4381-84(1993)e1 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM D4381-84(2001) Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM C173/C173M-08 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-08a Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-09 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-16 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-23 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM C173/C173M-07 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-01e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-01 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM E965-96(2001) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E965-96 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM D3731-20 Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
ASTM D5848-07 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-10 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5848-98 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM D5130-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D5848-10e1 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E2619-08 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM F870-23 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM B767-88(2021) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM D5993-18 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM F870-94(2000) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM F870-94(2016) Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
ASTM C715-90(2016) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1728-02 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM C810-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM C810-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM C810-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D5220-08 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D2959-95(2009) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D4074/D4074M-11(2015) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM D2959-95 Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2959-95(2003) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2959-95(2017) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM D4074/D4074M-11 Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D6172-98(2010) Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
ASTM C1471/C1471M-05(2021) Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1471/C1471M-22 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C957/C957M-10 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C1127/C1127M-15(2023) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM D5085-02 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM C957-05 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C957-05a Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C957-06 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM D4251-89(2003) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM D5086-01 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5086-95 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5086-01(2008) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5085-02(2008) Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM C1471-05 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1127-01 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D5085-95 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM C1127-01(2009) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C1252-17 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
ASTM E2088-06 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E2088-00 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E2088-06(2011) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E2088-06(2021) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E2088-06(2015) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM D8154-17e1 Standard Test Methods for ¹H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
ASTM D8154-17 Standard Test Methods for ¹H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
ASTM D6172/D6172M-18 Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
ASTM C1127-95 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

ZA-SANS, Peak area standard content

SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume

American National Standards Institute （ANSI), Peak area standard content

ANSI/BOMA Z65.3-2009 Gross Area of a Building: Standard Methods of Measurement
BS EN ISO 9073-1:2023 Nowovens. Test methods Determination of mass per unit area (British Standard)
BS EN ISO 748:2021 Tracked Changes. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)

International Organization for Standardization (ISO), Peak area standard content

ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas

British Standards Institution (BSI), Peak area standard content

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS EN ISO 25178-71:2017 Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards
BS EN 4723:2015 Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seat

Taiwan Provincial Standard of the People's Republic of China, Peak area standard content

CNS 14064-2-2021 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1997 Guide for the inclusion of environmental aspect in product standards
CNS 14064-1-2021 Guide for the inclusion of environmental aspect in product standards

German Institute for Standardization, Peak area standard content

DIN EN ISO 25178-71:2018-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017); German version EN ISO 25178-71:2017
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010
DIN 38414-19:1999 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19)
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration

ES-UNE, Peak area standard content

UNE-EN ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)

Association Francaise de Normalisation, Peak area standard content

NF L17-422*NF EN 2559:1997 Aerospace series. Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area.
NF L17-420*NF EN 2557:1997 Aerospace series. Carbon fibre preimpregnates. Determination of mass per unit area.
NF T73-322*NF EN 1791:1997 Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content.
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration

AASHTO - American Association of State Highway and Transportation Officials, Peak area standard content

T196-1995 Standard Specification for Air Content of Freshly Mixed Concrete by the Volumetric Method (Eighteenth Edition; ASTM C173-94)
T 196-1996 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method (HM-22; Part IIA; ASTM Designation ASTM C 173-94a)
T 326-2005 Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape@ Surface Texture@ and Grading)
TP 56-2003 Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape@ Surface Texture@ and Grading)
TP56-1999 Standard Test Method for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape@ Surface Texture@ and Grading)
TP56-1997 Standard Test Method for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape@ Surface Texture@ and Grading)

API - American Petroleum Institute, Peak area standard content

API H00005-2000 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products (First Edition)

KR-KS, Peak area standard content

KS F 2354-2013(2023) Standard test method for asphalt content from asphalt paving mixtures

KE-KEBS, Peak area standard content

KS 08-120-1981 KENYA STANDARD METHOD FOR DETERMINATION OF MASS PER UNIT LENGTH AND MASS PER UNIT AREA OF WOVEN OR KNITTED FABRICS

(U.S.) Ford Automotive Standards, Peak area standard content

FORD ESB-M64J27-B1-1993 PRIMER, WATERBORNE AUTODEPOSITION, BLACK, 160 C, LOW VOC Shown on ESB-M64J27-A1
FORD WSS-M7C95-A-2004 SUPERFICIAL WAX, SOLVENT BASED, 35% SOLIDS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M99J323-A2-2005 HARDENER, TWO PACK, 75% SOLIDS, EXTERIOR, FOR TOPCOAT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESK-M99J323-A1

AENOR, Peak area standard content

UNE 55539-14:1995 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULLATIONS CONTAINING THEM. PART 14: STANDARD SOLUTIONS WITH BUFFERED PH.
UNE 55539-1:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 1: GENERALITIES.
UNE 55539-4:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 4: SOLUTIONS OF SULFURIC ACID, OF CONCENTRATIONS BETWEEN 0,
UNE 55539-5:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 5: SOLUTION OF SILVER NITRATE, OF CONCENTRATION 0,1 MOL/L.
UNE 55539-7:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 7: SOLUTION OF IODINE, OF CONCENTRATION 0,05 MOL/L.
UNE 55539-10:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTION TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 10: SOLUTION OF POTASSIUM DICHROMATE, OF CONCENTRATION 1/60
UNE 55539-9:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTION TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 9: SOLUTION OF POTASSIUM PERMANGANATE, OF CONCENTRATION 0,02
UNE 55539-2:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 2: SOLUTIONS OF SODIUM HYDROXIDE, OF CONCENTRATIONS BETWEEN
UNE 55539-13:1995 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 13: SOLUTION OF DISODIUM ETHYLENE-DINITRILE-TETRAACETATE (E
UNE 55539-12:1995 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 12: ACETOUS SOLUTION OF PERCHLORIC ACID, OF CONCENTRATION 0
UNE 55539-11:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 11: METHANOLIC SOLUTION OF SODIUM HYDROXIDE, OF CONCENTRATI
UNE 55539-3:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 3: SOLUTIONS OF HYDROCHLORIC ACID, OF CONCENTRATIONS BETWEE
UNE 55539-6:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 6: SOLUTION OF AMMONIUM THIOCYANATE, OF CONCENTRATION 0,1 M
UNE 55539-8:1994 SURFACE ACTIVE AGENTS. METHODS FOR PREPARATION, STANDARDIZATION AND STORAGE OF STANDARD SOLUTIONS TO BE USED IN VOLUMETRIC ANALYSIS OF SURFACE ACTIVE AGENTS AND FORMULATIONS CONTAINING THEM. PART 8: SOLUTION OF SODIUM THIOSULFATE, OF CONCENTRATION 0,1 MOL

IX-EU/EC, Peak area standard content

M 401-2007 Standardisation mandate to CEN for the creation of a European standard on volumetric flow from stationary sources in the field of air emissions

Group Standards of the People's Republic of China, Peak area standard content

T/HBTL 007-2020 Standard for the content limit of volatile organic compounds in low-VOC roofing waterproof coatings

TH-TISI, Peak area standard content

TIS 121.12-2010 Standard test methods for textiles.part 12: woven fabrics.determination of mass per unit length and mass per unit area

PK-PSQCA, Peak area standard content

PS 118-1960 PAKISTAN STANDARD SPECIFICATION FOR DETERMINING THE IRREGULARITY OF YARN BY VARIABILITIES OF 1-INCH WEIGHTS

ESD - ESD ASSOCIATION, Peak area standard content

STM11.12-2000 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

PL-PKN, Peak area standard content

PN A74042-01-1993 Cereals and cereal products Determination of wet gluten by mechanical means General principles and scope of standard

Standard Association of Australia （SAA）, Peak area standard content

AS 1289.5.8.7:1998(R2013)
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components

Danish Standards Foundation, Peak area standard content

DS/EN 2331:1993 Aerospace series. Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area

CEN - European Committee for Standardization, Peak area standard content

EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration

European Committee for Standardization (CEN), Peak area standard content

EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of