ZH
RU
ES

Temper

Temper, Total:500 items.

In the international standard classification, Temper involves: Materials for aerospace construction, Welding, brazing and soldering, Corrosion of metals, Surface treatment and coating, Heat treatment, Iron and steel products, Products of the textile industry, Non-ferrous metals, Glass, Springs, Shipbuilding and marine structures in general, Small craft, Gears, Products of non-ferrous metals, Ferrous metals, Fasteners, Vocabularies, Fluid storage devices, Kitchen equipment, Cans. Tins. Tubes, Construction materials, Road vehicle systems, Conducting materials, Structures of buildings, Fasteners for aerospace construction, Coatings and related processes used in aerospace industry.

Society of Automotive Engineers (SAE), Temper

• SAE AS1990C-2013 Aluminum Alloy Tempers
• SAE AS1990D-2016 Aluminum Alloy Tempers
• SAE AMS5045D-1978 LOW CARBON STEEL STRIP Full-Hard Temper
• SAE AMS5044E-1978 LOW CARBON STEEL STRIP Half-Hard Temper
• SAE AMS6451B-2000 Steel, Spring Wire 1.4Si 0.65Cr (0.51-0.59C) (SAE 9254) Oil Tempered
• SAE AMS5122J-2008 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS5122D-1974 STEEL STRIP (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS5122E-1978 STEEL STRIP (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS5122F-1985 STEEL STRIP (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS5122J-2013 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS5122B-1951 STEEL STRIP 0.89-1.04C (SAE 1095) Hard Temper
• SAE AMS5122G-1999 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper
• SAE AMS4959D-2003 Titanium Alloy Wire 13.5V 11Cr 3Al Spring Temper
• SAE AMS4959E-2003 Titanium Alloy Wire 13.5V 11Cr 3Al Spring Temper
• SAE AMS5122H-2003 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper UNS G10950
• SAE AMS5122J-2003 Steel Strip (0.90 1.04C) (SAE 1095) Hard Temper
• SAE AMS5372C-1984 Castings-Sand, 16Cr 1.9Ni, Normalized and Tempered
• SAE AMS5115H-1999 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
• SAE AMS5115G-1994 WIRE, CARBON STEEL 0.60 - 0.75C Hardened and Tempered
• SAE AMS5115H-2013 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
• SAE J316-1988 OIL TEMPERED CARBON STEEL SPRING WIRE AND SPRINGS
• SAE J993B-1973 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
• SAE AMS4959B-1992 TITANIUM ALLOY WIRE 13.5V - 11Cr - 3A1 Spring Temper
• SAE AMS4959E-2012 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper
• SAE AMS7440D-2011 Balls, Steel, Low-Chromium, High Carbon Hardened and Tempered
• SAE AMS5044C-1951 STEEL SHEET AND STRIP Low Carbon Half Hard Temper
• SAE AMS5688L-2007 Steel, Corrosion-Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS4959E-2008 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper
• SAE J157-1988 OIL TEMPERED CHROMIUM - SILICON ALLOY STEEL WIRE AND SPRINGS
• SAE AMS5045E-1983 STEEL SHEET AND STRIP 0.25 max Carbon Hard Temper
• SAE AMS5866C-1999 Steel, Corrosion Resistant, Flat Wire 18Cr 9.0Ni, (SAE 30302) Spring Temper
• SAE AMS4602E-2022 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)
• SAE AMS7440D-1988 Balls, Steel, Low-Chromium, High-Carbon Hardened and Tempered
• SAE AMS4490H-2005 Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast Composition similar to UNS M11916
• SAE AMS4558G-2004 Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)
• SAE AMS6451C-2005 Steel, Spring Wire, 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered
• SAE AMS5045G-1994 Steel Sheet and Strip, 0.25 Carbon, maximum Hard Temper (Reaffirmed: 01 Sept 2000)
• SAE AMS5045H-2005 Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper UNS G10200
• SAE AMS4602D-2017 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
• SAE AMS4558G-2012 Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)
• SAE AMS7304B-1971 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered after Forming
• SAE AMS7304E-2011 Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming
• SAE AMS7304C-1979 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered after Forming
• SAE AMS7304D-1994 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered After Forming
• SAE AMS5110E-1983 CARBON STEEL WIRE 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn
• SAE AMS5110F-1989 CARBON STEEL WIRE 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn
• SAE AMS4602C-1995 COPPER BARS, RODS, AND SHAPES Oxygen-Free, Hard Temper (HO4)
• SAE AMS6451A-1994 STEEL WIRE, SPRING 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered
• SAE AMS5044G-1989 STEEL SHEET AND STRIP 0.15 Carbon, maximum Half Hard Temper
• SAE AMS5044F-1983 STEEL SHEET AND STRIP 0.15 max Carbon Half Hard Temper
• SAE AMS5688C-1952 STEEL WIRE, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Spring Temper
• SAE AMS5688G-1981 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5688H-2011 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5688E-1968 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5688D-1964 STEEL WIRE, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Spring Temper
• SAE AMS5688F-1971 STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS7304F-2015 Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming
• SAE AMS4558J-2022 Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)
• SAE J121M-1997 Decarburization in Hardened and Tempered Metric Threaded Fasteners
• SAE AMS5688K-2000 Steel, Corrosion Resistant, Wire 18Cr 9.0Ni (SAE 30302) Spring Temper
• SAE AMS4602D-2003 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
• SAE AMS5044H-1994 Steel Sheet and Strip, 0.15 Carbon, maximum Half Hard Temper (Reaffirmed: 01 Sept 2000)
• SAE AMS5044J-2005 Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper UNS G10100
• SAE AMS4602A-1979 COPPER BARS, RODS, AND SHAPES Oxygen-Free, Hard Temper (CDA 102)
• SAE AMS4625F-1994 PHOSPHOR BRONZE BARS, RODS, AND TUBING 95Cu - 5Sn Hard Temper
• SAE AMS6451C-2011 Steel, Spring Wire 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered
• SAE AMS5866D-2012 Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5688L-2012 Steel, Corrosion-Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5866A-1993 STEEL, CORROSION RESISTANT, FLAT WIRE 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5335E-1984 Castings-Sand, 0.65Cr 0.75Ni 0.20Mo (0.25-0.33C) Normalized and Tempered
• SAE AMS4490J-2011 Magnesium Alloy Castings, Die, 9.0Al 0.70Zn (AZ91D, Temper F), As Cast
• SAE AMS4612J-2004 Brass, Naval, Bars and Rods 60.5Cu 38.5Zn 0.75Sn, Hard Temper (H04)
• SAE AMS4720E-2001 Wire, Phosphor Bronze 95Cu 5.0Sn 0.19P Cold Drawn, Spring Temper (H08)
• SAE AMS7304E-2001 Springs, Steel, 0.85 1.05C, Hardened and Tempered After Forming
• SAE AMS4720D-1994 WIRE, PHOSPHOR BRONZE 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (HO8)
• SAE AMS4720E-2006 Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)
• SAE J351-1988 OIL TEMPERED CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS
• SAE AMS5115F-1983 CARBON STEEL WIRE Valve Spring Quality 0.60 - 0.75C Hardened and Tempered
• SAE AMS5044H-2000 Steel, Sheet and Strip 0.15 Carbon, maximum Half Hard Temper
• SAE AMS5045H-2013 Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper
• SAE AMS5044J-2013 Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper
• SAE AMS5045G-2000 Steel, Sheet and Strip 0.25 Carbon, maximum Hard Temper
• SAE AMS5866-1989 STEEL WIRE, FLAT, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS5044K-2019 Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper
• SAE AMS5866F-2022 Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (302) Spring Temper
• SAE AMS4720J-2022 Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)
• SAE J121-1997 Decarburization in Hardened and Tempered Unified Threaded Fasteners
• SAE AMS7458A-1962 STUDS, STEEL, LOW ALLOY HEAT RESISTANT Normalized and Tempered, Roll Threaded
• SAE AMS7458B-1963 STUDS, STEEL, LOW ALLOY HEAT RESISTANT Normalized and Tempered, Roll Threaded
• SAE AMS7458-1960 STUDS, STEEL, LOW ALLOY HEAT RESISTANT Normalized and Tempered - Roll Threaded
• SAE AMS5351F-2012 Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered
• SAE AMS5331D-1982 STEEL CASTINGS, SAND 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered
• SAE AMS5331E-2011 STEEL CASTINGS, SAND 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered
• SAE AMS4880D-2018 Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and Temper Annealed (TQ50)
• SAE AMS6379A-1973 Bars, Die Drawn, 0.95Cr 0.29Mo 0.05Te (0.40-0.53C), Tempered, 165,000 psi Yield (Noncurrent: 01 Jul 1981) (Reaffirmed: 01 Apr 1994)
• SAE AMS4625G-2001 Phosphor Bronze Bars, Rods and Tubing 95Cu 5Sn Hard Temper
• SAE AMS4720F-2009 Wire, Phosphor Bronze 95Cu 5.0Sn 0.19P Cold Drawn, Spring Temper (H08)
• SAE J132-1988 OIL TEMPERED CHROMIUM-VANADIUM VALVE SPRING QUALITY WIRE AND SPRINGS
• SAE ARP891A-2002 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)
• SAE ARP891-1967 DETERMINATION OF ALUMINUM ALLOY TEMPERS THROUGH ELECTRICAL CONDUCTIVITY MEASUREMENT (EDDY CURRENT)
• SAE AMS5045J-2015 Steel@ Sheet and Strip 0.25 Carbon@ Maximum Hard Temper (UNS G10200)
• SAE AMS5673-1955 STEEL WIRE, CORROSION RESISTANT 17Cr - 7Ni - 1Al Precipitation Hardening - Spring Temper
• SAE AMS5866D-2006 Steel, Corrosion Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper UNS S30200
• SAE AMS4881C-2011 Nickel-Aluminum-Bronze, Martensitic, Sand and Centrifugal Castings 78Cu - 11Al - 5.1Ni - 4.8Fe Quench Hardened and Temper Annealed
• SAE AMS4880C-1995 Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and Temper Annealed (UNS C95510)
• SAE AS7455-1991 Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded
• SAE J1928-2012 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
• SAE AMS5351E-2011 STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT 13Cr Normalized and Tempered
• SAE AMS5372C-2000 Steel Castings, Sand, Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
• SAE AMS5334D-2011 STEEL CASTINGS, INVESTMENT 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered
• SAE AMS5372B-1991 STEEL CASTINGS, SAND, CORROSION RESISTANT 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
• SAE AMS5334H-2013 Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered
• SAE AMS5334E-1995 STEEL, INVESTMENT CASTINGS 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered
• SAE AMS5336J-2022 Steel, Investment Castings 0.95Cr - 0.20Mo (0.25 - 0.35C) (4130 Mod) Normalized or Normalized and Tempered
• SAE AMS5338H-2022 Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (4140 Mod) Normalized or Normalized and Tempered
• SAE AMS4510H-2015 Phosphor Bronze@ Sheet@ Strip@ and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08) (UNS C51000)
• SAE AMS5110H-2001 Carbon Steel, Wire and Springs 0.75 0.88C (SAE 1080) Spring Temper, Cold Drawn
• SAE AMS5110J-2011 Carbon Steel, Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn
• SAE AMS5672-1970 STEEL WIRE, CORROSION RESISTANT 12Cr - 8.5Ni - 0.30 (Cb+Ta) - 1.1 Ti - 2.0Cu Spring Temper
• SAE AMS5334H-2007 Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered UNS J13042

SAE - SAE International, Temper

• SAE AS1990-1990 Aluminum Alloy Tempers
• SAE AS1990C-2003 Aluminum Alloy Tempers
• SAE AS1990B-1999 Aluminum Alloy Tempers
• SAE AS1990A-1998 Aluminum Alloy Tempers
• SAE AMS4510B-1946 PHOSPHOR BRONZE STRIP Spring Temper
• SAE AMS4558-1948 BRASS TUBING Leaded - Drawn Temper
• SAE AMS4602-1967 COPPER BARS AND RODS Oxygen-Free@ Hard Temper
• SAE AMS4720B-1951 PHOSPHOR BRONZE WIRE 95Cu - 5Sn Spring Temper
• SAE AMS5115G-1990 Wire@ Carbon Steel 0.60 - 0.75C Hardened and Tempered
• SAE AMS5115J-2017 Wire@ Carbon Steel 0.60 - 0.75C Hardened and Tempered
• SAE J316-1994 OIL TEMPERED CARBON STEEL SPRING WIRE AND SPRINGS
• SAE J316-1998 OIL TEMPERED CARBON STEEL SPRING WIRE AND SPRINGS
• SAE J993-2018 Alloy and Temper Designation Systems for Aluminum
• SAE J993-1973 Alloy and Temper Designation Systems for Aluminum@ Standard;
• SAE AMS4959-1976 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper
• SAE AMS7440D-1996 Balls@ Steel@ Low-Chromium@ High Carbon Hardened and Tempered
• SAE AMS5122G-1990 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (UNS G10950)
• SAE AMS5110D-1977 Steel Wire@ Carbon Spring Temper (0.75 - 0.88C) (SAE 1080)
• SAE AMS7440C-1988 BALLS@ LOW-CHROMIUM@ HIGH-CARBON STEEL Hardened and Tempered
• SAE AMS5122K-2017 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (UNS G10950)
• SAE J157-1994 OIL TEMPERED CHROMIUM - SILICON ALLOY STEEL WIRE AND SPRINGS
• SAE J157-1970 Oil Tempered Chromium - Silicon Alloy Steel Wire and Springs
• SAE J157-1998 Oil-Tempered Chromium—Silicon Alloy Steel Wire and Springs
• SAE AMS4610E-1951 BRASS FREE CUTTING 61.5Cu - 35.5Zn - 3Pb Half Hard Temper
• SAE AMS4510C-1951 PHOSPHOR BRONZE AND STRIP 95Cu - 5Sn Spring Temper
• SAE AMS4558B-1958 BRASS TUBING@ SEAMLESS 66Cu - 32Zn - 1.6Pb Drawn Temper
• SAE AMS4558A-1951 BRASS TUBING@ SEAMLESS 66Cu - 32Zn - 1.6Pb Drawn Temper
• SAE AMS7304D-1988 Springs@ Steel 0.85 - 1.05C Hardened and Tempered After Forming
• SAE AMS4959C-1993 Titanium Alloy Wire 13.5V - 11Cr - 3A1 Spring Temper (UNS R58010)
• SAE AMS4959A-1984 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper (UNS R58010)
• SAE AMS4959F-2017 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper (UNS R58010)
• SAE AMS4959B-1987 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper (UNS R58010)
• SAE AMS4602B-1986 COPPER BARS@ RODS AND SHAPES Oxygen-Free@ Hard Temper (UNS C10200)
• SAE AMS6451A-1988 Steel Wire@ Spring 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered
• SAE AMS4959G-2017 Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper (UNS R58010)
• SAE AMS5688J-1992 Steel@ Corrosion Resistant@ Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper
• SAE AMS7440E-2016 Balls@ Steel@ Low-Chromium@ High Carbon Hardened and Tempered (Stabilzed Type)
• SAE J351-1998 OIL TEMPERED CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS
• SAE J351-1994 OIL TEMPERED CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS
• SAE J351-1968 Oil Tempered Carbon Steel Valve Spring Quality Wire and Springs
• SAE AMS4558C-1977 BRASS TUBING@ SEAMLESS 66.5Cu - 32Zn - 1.6Pb Drawn Temper (UNS C33200)
• SAE AMS4558D-1983 BRASS TUBING@ SEAMLESS 66.5Cu - 32Zn - 1.6Pb Drawn Temper (UNS C33200)
• SAE AMS4558E-1989 Brass Tubing@ Seamless 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) (UNS C33200)
• SAE AMS4558F-1997 Brass@ Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) (UNS C33200)
• SAE AMS4558H-2017 Brass@ Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) (UNS C33200)
• SAE AMS4720C-1978 PHOSPHOR BRONZE WIRE 95Cu - 4.6Sn - 0.19P (CDA 510) Spring Temper (UNS C51000)
• SAE AMS4602A-1967 COPPER BARS@ RODS@ AND SHAPES Oxygen-Free@ Hard Temper (CDA 102) (UNS C10200)
• SAE AMS4602C-1991 Copper Bars@ Rods@ and Shapes@ Oxygen-Free@ Hard Temper (H04) (UNS C10200)
• SAE AMS5866E-2016 Steel@ Corrosion-Resistant@ Flat Wire 18Cr - 9.0Ni (302) Spring Temper (UNS S30200)
• SAE AMS5688H-1987 STEEL WIRE@ CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Spring Temper (UNS S30200)
• SAE AMS5688M-2019 Steel@ Corrosion Resistant@ Wire 18Cr - 9.0Ni (302) Spring Temper (UNS S30200)
• SAE AMS6451D-2015 Steel@ Spring Wire 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered (G92540)
• SAE J132-1994 OIL TEMPERED CHROMIUM-VANADIUM VALVE SPRING QUALITY WIRE AND SPRINGS
• SAE J132-1969 Oil Tempered Chromium-Vanadium Valve Spring Quality Wire and Springs
• SAE AMS4625H-2016 Phosphor Bronze Bars@ Rods@ and Tubing 95Cu - 5Sn Hard Temper (UNS C51000)
• SAE AMS5110G-1995 Carbon Steel@ Wire 0.75 - 0.88C (SAE 1080) Spring Temper@ Cold Drawn (UNS G10800)
• SAE AMS4651A-1978 Copper Beryllium Alloy Bars and Rods 98Cu - 1.9Be (CDA 172) Hard Temper
• SAE AMS5866B-1995 Steel@ Corrosion Resistant@ Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper (UNS S30200)
• SAE AMS5673A-1957 Steel Wire@ Corrosion and Resistant 17Cr - 7Ni - 1Al Precipitation Hardening@ Spring Temper
• SAE AMS5673C-1974 Steel Wire@ Corrosion and Resistant 17Cr - 7.1Ni - 1.1Al Precipitation Hardenable@ Spring Temper
• SAE AMS5673B-1965 Steel Wire@ Corrosion and Resistant 17Cr - 7Ni - 1Al Precipitation Hardening@ Spring Temper
• SAE ARP891B-2006 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)
• SAE AMS5045K-2019 Steel@ Sheet and Strip 0.25 Carbon@ Maximum Hard Temper (UNS G10200)
• SAE J132-1998 Marine Electrical Switches
• SAE J1928-2018 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
• SAE J1928-1989 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
• SAE J1928-2020 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
• SAE J1928-1991 DEVICES PROVIDING BACKFIRE FLAME CONTROL FOR GASOLINE ENGINES IN MARINE APPLICATIONS
• SAE J1928-2005 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
• SAE AMS5372C-1994 Steel Castings@ Sand@ Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
• SAE AMS5331E-1987 Steel@ Castings@ Sand 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered (UNS J24060)
• SAE AMS5351F-1995 Steel Castings@ Sand@ Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered
• SAE AMS5335F-2001 Steel Castings@ Sand 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered
• SAE AMS7702C-1994 Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Cold Rolled@ Half-Hard Temper
• SAE AMS4873B-1979 ALUMINUM BRONZE CASTINGS@ SAND 85Cu - 11Al - 3.6Fe Solution Heat Treated and tempered
• SAE AMS4873D-1987 Aluminum Bronze Castings@ Sand 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered
• SAE AMS4510F-1994 Phosphor Bronze@ Sheet@ Strip@ and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08) (UNS C51000)
• SAE J121M-2013 Decarburization in Hardened and Tempered Metric Threaded Fasteners
• SAE AMS7702F-2010 Nickel-Iron Alloy@ Magnetic@ Sheet and Strip Cold Rolled@ Half-Hard Temper

Underwriters Laboratories (UL), Temper

• UL 1357-2012 Oxygen-fuel gas flash arrester and combination flash arrester and back-pressure check valves
• UL SUBJECT 1357-2004 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES
• UL SUBJECT 1357-2007 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS FLASH ARRESTER AND COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES Issue Number 3

U.S. Air Force, Temper

• AIR FORCE MIL-STD-867 B-2007 TEMPER ETCH INSPECTION
• AIR FORCE MIL-STD-867 C VALID NOTICE 1-2013 Temper Etch Inspection
• AIR FORCE MIL-STD-867 B CHANGE 1-2008 TEMPER ETCH INSPECTION
• AIR FORCE MIL-STD-867 C-2008 TEMPER ETCH INSPECTION

SE-SIS, Temper

• SIS 14 25 41-1975 Steel for hardening and tempering
• SIS 14 25 34-1975 Steel for hardening and tempering
• SIS SS 14 22 45-1984 Steel for hardening and tempering
• SIS SS 14 22 34-1980 Steel for hardening and tempering
• SIS 14 22 44-1974 Steel for hardening and tempering
• SIS SS 14 25 34-1980 Steel for hardening and tempering
• SIS SS 14 21 31-1984 Steel for hardening and tempering
• SIS SS 14 21 30-1984 Steel for hardening and tempering
• SIS 14 21 20-1975 Steel for hardening and tempering
• SIS 14 22 25-1974 Steel for hardening and tempering
• SIS 14 22 34-1974 Steel for hardening and tempering
• SIS MNC 852-1980 Steels for hardening and tempering
• SIS MNC 852-1984 Steels for hardening and tempering
• SIS MNC 852-1991 Steels for hardening and tempering — Summary
• SIS MNC 852 E-1985 Steels for hardening and tempering — Summary
• SIS MNC 852-1985 Steels for hardening and tempering
• SIS MNC 852 E-1984 Steels for hardening and tempering — Summary
• SIS MNC 852 E-1980 Steels for hardening and tempering — Summary
• SIS 14 16 72-1974 Steel for harden ing and tempering and for flame and induction hardening
• SIS 14 15 72-1974 Steel for hardening and tempering and for flame and induction hardening
• SIS SS 14 16 74-1980 Steel for hardening and tempering and for flame and induction hardening
• SIS SS 14 16 72-1980 Steel for hardening and tempering and for flame and induction hardening
• SIS 14 16 74-1974 Steel for hardening and tempering and for flame and induction hardening
• SIS 14 22 40-1975 Steel for hardening and tempering and for nitriding
• SIS SS 14 16 72-1986 Steel for hardening and tempering — SS-steel 16 72
• SIS SS 14 21 31-1987 Steel for hardening and tempering - SS-steel 21 31
• SIS SS 14 21 30-1987 Steel for hardening and ternpering - SS-steel 21 30
• SIS SS 14 22 25-1991 Steel for hardening and tempering — SS-steel 22 25
• SIS SS 14 22 44-1991 Steel for hardening and tempering — SS-steel 22 44
• SIS SS 14 15 72-1986 Steel for hardening and tempering — SS-steel 15 72
• SIS SS 14 25 41-1986 Steel for hardening and tempering - SS-steel 25 41
• SIS SS 14 22 45-1987 Steel for hardening and tempering - SS-stel 22 45
• SIS SS 14 22 34-1986 Steel for hardening and tempering — SS-steel 22 34
• SIS SS 14 15 72-1991 Steel for hardening and tempering — SS-steel 15 72
• SIS SS 14 21 20-1991 Steel for hardening and tempering — SS-steel 21 20
• SIS SS 14 16 74-1986 Steel for hardening and tempering — SS-steel 16 74

Professional Standard - Machinery, Temper

• JB/T 7437-2015 Dry flashback arrestor
• JB/T 7437-1994 Dry type flashback arresters
• JB/T 9201-2007 Induction hardening and tempering of iron and steel parts
• JB/T 9200-2008 Flame hardening and tempering of iron and steel parts
• JB/T 9200-1999 Frame hardening and tempering of iron and steel parts
• JB/T 4202-2008 Remaining heat from forging for quenching and tempering of steel
• JB/T 9201-1999 Induction hardening and tempering of iron and steel parts
• JB/T 4202-1999 Ansforging and tempering of steel
• JB/T 3999-1999 Carburizing or carbonitriding and post - quenching and tempering of steel part
• JB/T 3999-2007 Carburizing or carbonitriding, post-quenching and tempering of steel parts
• JB/T 50078-1999 Product quality classification of dry tempered fuse
• JB/T 8491.2-1996 Technical conditions for heat treatment of machine tool parts Quenching and tempering
• JB/T 8491.3-1996 Technical conditions for heat treatment of machine tool parts induction hardening and tempering
• JB/T 8491.2-2008 Technical requirement heat treatment for machine tool parts. Part 2: Quenching and tempering

HU-MSZT, Temper

• MSZ 22103/2-1981
• MSZ 22103/6-1981

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Temper

• GB/T 16924-1997 Quenching and tempering of steel parts
• GB/T 16924-2008 Quenching and tempering of steel parts
• GB/T 18983-2003 Oil-hardened and tempered stell wire for mechanical springs
• GB/T 25744-2010 Metallographic examination for carburizing quenching and tempering of steel parts
• GB/T 18230.5-2000 Plain washers for high-strength structural bolting hardened and tempered
• GB 12136-1989 Arrester for dissolved acetylene cylinders
• GB/T 19530-2004 Hot-rolled wire rod for quenched and tempered springs
• GB/T 17879-1999 Gears--Surface temper etch inspection after grinding
• GB 2271-1984 Oil tempered chromium-vanadium alloy steel valve spring quality wires
• GB/T 17879-2023 Chemical Etching Examination of Surface Tempering of Gears after Grinding

Japanese Industrial Standards Committee (JISC), Temper

• JIS B 6913:1989 Quenching and tempering of steel
• JIS B 6913:1999 Process of quenching and tempering of iron and steel
• JIS H 0001:1988 Temper designation for aluminium and aluminium alloys
• JIS G 7751:2000 Hot rolled steels for quenched and tempered springs
• JIS H 0001:1998 Aluminium, magnesium and their alloys -- Temper designation
• JIS B 6912:1996 Process of induction hardening and tempering of iron and steel
• JIS B 6912:2002 Process of induction hardening and tempering of iron and steel
• JIS G 3566:1988 Oil tempered chromium silicon alloy steel wires for valve spring
• JIS G 3567:1988 Oil tempered silicon manganese alloy steel spring wires
• JIS G 3568:1989 Oil tempered chromium silicon alloy steel spring wires
• JIS G 3560:1994 Oil tempered wire for mechanical springs
• JIS G 3561:1994 Oil tempered wire for valve springs
• JIS B 6914:1997 Process of carburizing and carbonitriding, quenching and tempering of steel
• JIS B 6914:2002 Process of carburizing and carbonitriding, quenching and tempering of iron and steel
• JIS G 3565:1988 Oil tempered chromium vanadium alloy steel wires for valve spring
• JIS B 1756:2008 Gears -- Surface temper etch inspection after grinding
• JIS G 3204:1988 Quenched and tempered alloy steel forgings for pressure vessels
• JIS B 6913 AMD 1:2010 Process of quenching and tempering of iron and steel (Amendment 1)
• JIS B 6912 AMD 1:2010 Process of induction hardening and tempering of iron and steel (Amendment 1)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Temper

• GB/T 18983-2017 Wire for quenched and tempered springs
• GB/T 34882-2017 Induction hardening and tempering of iron and steel parts
• GB/T 33954-2017 Hot-rolled wire rod for quenched and tempered spring steel wires
• GB/T 34889-2017 Carburizing or carbonitriding,quenching and tempering of steel parts

U.S. Military Regulations and Norms, Temper

• ARMY MIL-T-44222 A-1991 TENT LINER SECTIONS; INSULATED (TEMPER)
• ARMY MIL-F-44251 A-1990 FRAME SECTIONS, TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER)
• ARMY MIL-R-12221 D REINST NOTICE 2-2008 RIVET, SOLID, ALUMINUM ALLOY, GRADE 7277, TEMPERED
• ARMY MIL-R-12221D-1985 RIVET, SOLID, ALUMINUM ALLOY, GRADE 7277, TEMPERED
• ARMY MIL-T-44243 A (1)-1992 TENT SECTIONS, TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER)
• ARMY MIL-T-44243 A-1990 TENT SECTIONS, TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER)
• ARMY MIL-S-46049 C REINST NOTICE 2-1998 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY
• ARMY MIL-S-46049 C-1987 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY

PL-PKN, Temper

• PN H01706-1971 Non-ferrous metals Temper designation
• PN EN 10083-1-1993 Quenched and tempered steels. Technical delivery conditions for special steels

Association of German Mechanical Engineers, Temper

• DVS 2713 Beiblatt-2003

NZ-SNZ, Temper

• NZS 4617:1989 Tempering (3-Port Mixing) Valves

Korean Agency for Technology and Standards (KATS), Temper

• KS B 4903-1999 Process of quenching and tempering of iron and steel
• KS B 4904-1986(2018) CARBURIZING QUENCHING AND TEMPERING OF STEEL
• KS B 4903-1986 Process of quenching and tempering of iron and steel
• KS B 4904-1986 Carburizing, Quenching and Tempering of Stee1
• KS D ISO TR 11637-2005(2010) Boron treated engineering steels for quenching and tempering
• KS D 3579-1996 Oil tempered wire for mechanical springs
• KS D 3580-1996 Oil tempered wire for valve springs
• KS D 3580-1996(2016) Oil tempered wire for valve springs
• KS D 3579-1996(2021) Oil tempered wire for mechanical springs
• KS D 3579-1996(2016) Oil tempered wire for mechanical springs
• KS D 3580-1996(2021) Oil tempered wire for valve springs
• KS D 3579-1984 Oil tempered wire for mechanical springs
• KS D 3580-1983 Oil tempered wire for valve springs
• KS D ISO TR 11637:2005 Boron treated engineering steels for quenching and tempering
• KS B 4903-1999(2019) Process of quenching and tempering of iron and steel
• KS D ISO TR 11637:2013 Boron treated engineering steels for quenching and tempering
• KS D 4318-2006(2011) Austempered spheroidal graphite iron castings
• KS D 3591-2002(2017) Oil tempered silicon manganese alloy steel spring wires
• KS D 3591-1981 Oil tempered silicon manganese alloy steel spring wires
• KS D 3591-2002 Oil tempered silicon manganese alloy steel spring wires
• KS B 4902-1986(2018)
• KS D 3582-1991 Silicon CHROME STEEL FOR VALVE SPRING OIL-TEMPERED WIRE
• KS D 3591-2002(2022) Oil tempered silicon manganese alloy steel spring wires
• KS D 3582-1986 Silicon CHROME STEEL FOR VALVE SPRING OIL-TEMPERED WIRE
• KS B 4902-1986 Hardening by induction heating and tempering of iron and steel
• KS D ISO 2107:2010 Aluminium and aluminium alloys-Wrought products-Temper designations
• KS D ISO 2107:2013 Aluminium and aluminium alloys-Wrought products-Temper designations
• KS B ISO 14104-2015(2020) Gears－Surface temper etch inspection after grinding
• KS B ISO 14104:2006 Gears-Surface temper etch inspection after grinding
• KS B ISO 14104:2015 Gears-Surface temper etch inspection after grinding
• KS B ISO 7415-2008(2018) Plain washers for high-strength structural bolting,hardened and tempered
• KS W 1712-2002 Aerospace-Hardened and tempered low alloy steel bolts and screws
• KS B ISO 7415:2008 Plain washers for high-strength structural bolting,hardened and tempered
• KS D ISO 8458-3-2003(2013) Steel wire for mechanical springs－Part 3：Oil－hardened and tempered wire

International Federation of Trucks and Engines, Temper

• NAVISTAR TMS 1034-2014 VOID - Steels, Medium Carbon, Quenched and Tempered

KR-KS, Temper

• KS B 4904-1986(2023) CARBURIZING QUENCHING AND TEMPERING OF STEEL
• KS D ISO 2107-2010 Aluminium and aluminium alloys－Wrought products－Temper designations
• KS B 4902-1986(2023) Hardening by induction heating and tempering of iron and steel
• KS V ISO 13592-2013(2023) Small craft－Backfire flame control for petrol engines
• KS B ISO 7415-2008(2023) Plain washers for high-strength structural bolting,hardened and tempered

American Gear Manufacturers Association, Temper

• AGMA 94FTM7-1994 Allowable Surface Compressive Stresses of Gear Teeth Made of Cast Iron, Tempered Carbon Steels and Tempered Alloys Steels
• AGMA 2007-C00-2000 Gears -- Surface Temper Etch Inspection After Grinding

Association Francaise de Normalisation, Temper

• NF J95-038*NF ISO 13592:1998 Small craft. Backfire flame control for petrol engines.
• NF A02-150:1993 Aluminium and aluminium alloys. Wrought products. Temper designations.
• NF A02-007:1973 Semi-finished products made of magnesium and magnesium alloys. Temper designation.
• NF A02-150*NF EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
• NF A35-553*NF EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions.
• NF A35-571*NF EN 10089:2003 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
• NF A02-008:1996 Copper and copper alloys. Material condition or temper designation.
• NF A35-552-1:2006 Steels for quenching and tempering - Part 1 : general technical delivery conditions.
• NF EN 10270-2:2012 Fils en acier pour ressorts mécaniques - Partie 2 : fils en acier trempés à l'huile et revenus
• NF E23-034:2014 Gears - Surface temper etch inspection after grinding, chemical method
• NF A36-204-2:1995 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 2 : delivery conditions for quenched and tempered steels.

RO-ASRO, Temper

• STAS 9872-1974 Gopper and copper alloys tempper designatioxs
• STAS 9435-1973 Light metnls and their alloys TEMPER DESIGNATIONS
• STAS SR EN 515-1994 Aluminium and aluminium alloys. Wrought products. Temper designations
• STAS SR EN 515/C1-1995 Aluminium and aluminium alloys. Wrought products. Temper designations
• STAS SR ISO 1190/2:1993 Copper and copper alloys. Code of designation. Part 2: Designation of tempers

IN-BIS, Temper

• IS 5052-1993 Aluminium and its alloys - temper designations

American Society for Testing and Materials (ASTM), Temper

• ASTM C1048-97b Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass
• ASTM F3216-16 Standard Test Method for Performance of Retherm Ovens
• ASTM A321-90(1995)e1 Standard Specification for Steel Bars, Carbon, Quenched and Tempered
• ASTM A449-04be1 Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
• ASTM A449-04 Standard Specification for Quenched and Tempered Steel Bolts and Studs
• ASTM A449-04a Standard Specification for Quenched and Tempered Steel Bolts and Studs
• ASTM A449-04b Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
• ASTM A897/A897M-03 Standard Specification for Austempered Ductile Iron Castings
• ASTM B49-09 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
• ASTM A449-78a Standard Specification for Quenched And Tempered Steel Bolts And Studs
• ASTM F155-65 Method of Test for for Temper of Strip and Sheet Metals for Electronic Devices (Spring-Back Method
• ASTM A230/A230M-05 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
• ASTM A229/A229M-12 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
• ASTM A229/A229M-17 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
• ASTM A229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
• ASTM A229/A229M-99(2005) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
• ASTM C1048-12 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
• ASTM A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
• ASTM B601-18 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
• ASTM C1443-99(2010) Standard Specification for Glasses, Portlight, Circular, Fully Tempered
• ASTM B601-18a Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
• ASTM A553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

American National Standards Institute （ANSI), Temper

• ANSI/ASTM A321:1996 Specification for Steel Bars, Carbon, Quenched and Tempered
• ANSI H35.1-2004 Alloy and Temper Designation Systems for Aluminum
• ANSI/SAE J368-1993 High Strength, Quenched, and Tempered Structural Steels
• ANSI/ISO 14104:1995 Gears - Surface Temper Etch Inspection After Grinding
• ANSI/SAE J316-1994 Oil Tempered Carbon Steel Spring Wire and Springs
• ANSI/SAE J121-1994 Fasteners, Decarburization in Hardened and Tempered Threaded
• ANSI/SAE J351-1994 Oil Tempered Carbon Steel Valve, Spring Quality Wire, and Springs
• ANSI/AGMA 2007-C-2000 Gears - Surface Temper Etch Inspection After Grinding
• ANSI/SAE J132-1994 Oil Tempered Chromium-Vanadium Valve Spring Quality Wire and Springs

国家市场监督管理总局、中国国家标准化管理委员会, Temper

• GB/T 37464-2019 Hardening and tempering of heavy steel forgings
• GB/T 34484.2-2018 Heat-treatable steels—Part 2: Alloy steels for quenching and tempering

Group Standards of the People's Republic of China, Temper

• T/ZZB 2946-2022 Steel wire for quenched and tempered springs for suspensions
• T/ZSM 0019-2023 Quenched-tempered spring steel bars for automotive stabilizer

Professional Standard - Ferrous Metallurgy, Temper

• YB/T 5103-1993 Oil Quenching-Tempering Carbon Spring Steel Wire
• YB/T 5104-1993 Oil quenching-tempering silicomanganese alloy spring steel wire
• YB/T 5102-1993 Oil Quenched-Tempered Carbon Spring Steel Wire for Valves
• YB/T 5365-2006 Oil-quenched-tempered hot-rolled wire rod for spring steel wire
• YB/T 5105-1993 Oil-quenched-tempered chrome-silicon alloy spring steel wire for valves
• YB/T 5008-1993 Oil Quenched-Tempered Chrome Vanadium Alloy Spring Steel Wire for Valves

International Organization for Standardization (ISO), Temper

• ISO 13592:1998 Small craft - Backfire flame control for petrol engines
• ISO/TR 11637:1997 Boron treated engineering steels for quenching and tempering
• ISO 2107:2007 Aluminium and aluminium alloys - Wrought products - Temper designations
• ISO/AWI 2107 Aluminium and aluminium alloys — Wrought products — Temper designations
• ISO 8458-3:1992 Steel wire for mechanical springs; part 3: oil-hardened and tempered wire
• ISO 14104:1995 Gears - Surface temper etch inspection after grinding
• ISO 7415:1984 Plain washers for high-strength structural bolting, hardened and tempered
• ISO 7416:1984 Plain washers, chamfered, hardened and tempered for high-strength structural bolting
• ISO 6934-3:1991 Steel for the prestressing of concrete; part 3: quenched and tempered wire
• ISO 8458-3:2002 Steel wire for mechanical springs - Part 3: Oil-hardened and tempered wire

CZ-CSN, Temper

• CSN 65 4102-1984 Tempenng hitrate and nitrite salts

ISUZU - Isuzu Motors Ltd., Temper

• ISC-A310-1994 Oil Tempered Steel Spring Wires (Japanese/English Version)

The Aluminum Association, Temper

• AA YL-1-2001 Tempers for Aluminum and Aluminum Alloy Products
• AA YL-1-2011 Tempers for Aluminum and Aluminum Alloy Products
• AA H35.1-2003 Alloy and Temper Designation Systems for Aluminum
• AA H35.1(M)-2003 Alloy and Temper Designation Systems for Aluminum
• AA TAN-1-2005 Tempers for Aluminum and Aluminum Alloy Products Metric Edition
• AA TAN-1-2011 Tempers For Aluminum And Aluminum Alloy Products Metric Edition
• AA H35.1/H35.1M ERTA-2007 Alloy and Temper Designation Systems for Aluminum [Replaced: AA H35.1(M)]
• AA ANSI H35.1/H35.1M-2013 American National Standard Alloy and Temper Designation Systems for Aluminum

Taiwan Provincial Standard of the People's Republic of China, Temper

• CNS 4442-1994 Oil Tempered Carbon Steel Wires for Springs
• CNS 13098-1992 Austempered Spheroidal Graphite Iron Castings
• CNS 7995-1994 Oil Tempered Carbon Steel Wires for Valve Springs
• CNS 11277-1985 Hardening by Induction Heating and Tempering of Iron and Steel
• CNS 13343-1994 Oil Tempered Chromium Silicon Alloy Steel Wires for Springs
• CNS 7479-1994 Oil Tempered Silicon Manganese Alloy Steel Wires for Springs
• CNS 8700-1996 Quenched and Tempered Alloy Steel Forgings for Pressure Vessels
• CNS 7999-1994 Oil Tempered Chromium Silicon Alloy Steel Wires for Valve Springs
• CNS 7997-1994 Oil Tempered Chromium Vanadium Alloy Steel Wires for Valve Spring

RU-GOST R, Temper

• GOST 25442-1982 Molibdenum annealed strips for deep drawing. Specifications
• GOST R 51756-2001 Aluminum cans of deep drawing with easy open end. Specifications

API - American Petroleum Institute, Temper

• API PUBL 959-1982 Characterization Study of Temper Embrittlement of Chromium-Molybdenum Steels

(U.S.) Ford Automotive Standards, Temper

• FORD W-HT1-15-1994 NORMALIZING/NORMALIZING AND TEMPERING
• FORD ESH-M2A141-A-2003 ALUMINUM TUBING, EXTRUDED, TEMPERED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESH-M2A141-A-2009 ALUMINUM TUBING, EXTRUDED, TEMPERED ***TO BE USED WITH FORD WSS-M99P1111-A***

IT-UNI, Temper

• UNI 3988-1957

YU-JUS, Temper

• JUS C.A0.003-1990 Non-ferrous metals and alloys of non-ferrous metals. Terminology and definitions of processing, tempering, temper designation and surface appearance designation
• JUS C.A0.003-1981 Non-ferrous metals and alloys of non-ferrous metals. Temper designation and surface appearance designation

British Standards Institution (BSI), Temper

• BS EN 1564:1997 Founding - Austempered ductile cast irons
• BS EN 515:1993 Aluminium and aluminium alloys - Wrought products - Temper designations
• BS 7862:1996 Gears - Surface temper etch inspection after grinding
• BS EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
• BS EN 10083-1:2006 Steels for quenching and tempering - General technical delivery conditions
• BS ISO 13592:1998 Small craft - Backfire flame control for petrol engines
• BS EN 10277-5:1999 Bright steel products - Technical delivery conditions - Steels for quenching and tempering
• BS EN 10089:2002 Hot rolled steels for quenched and tempered springs - Technical delivery conditions
• BS EN 2031:2018 Aerospace series. Steel 102Cr6 (1.2067). Hardened and tempered. Bars
• BS EN 10277-5:2008 Bright steel products — Technical delivery conditions — Part 5: Steels for quenching and tempering
• BS ISO 14104:2014 Gears. Surface temper etch inspection after grinding, chemical method
• BS EN 10270-2:2011 Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
• BS EN 10270-2:2001 Steel wire for mechanical springs - Oil hardened and tempered spring steel wire
• BS EN 10083-3:2006 Steels for quenching and tempering — Part 3: Technical delivery conditions for alloy steels
• BS EN 10083-3:2006(2008) Steels for quenching and tempering — Part 3: Technical delivery conditions for alloy steels
• BS ISO 14104:2017 Gears. Surface temper etch inspection after grinding, chemical method

European Committee for Standardization (CEN), Temper

• EN 515:1993 Aluminium and Aluminium Alloys - Wrought Products - Temper Designations
• EN 515:2017 Aluminium and Aluminium Alloys - Wrought Products - Temper Designations
• prEN 2223-1981 Steel FE-PL32, hardened and tempered; bars; aerospace series
• EN 10089:2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
• prEN 784-1992 Plain washers for high-strength structural bolting, hardened and tempered
• prEN 10138-5-1991 Prestressing steels; part 5: quenched and tempered wire
• prEN 2031-1981 Aerospace series; steel FE-PL 31; hardened and tempered; bars
• prEN 785-1992 Plain washers, chamfered, hardened and tempered for high-strength structural bolting
• EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
• prEN 2159-1977 Aerospace series; steel FE-PM 44, hardened and tempered; bars D 150 mm

Danish Standards Foundation, Temper

• DS/EN 515:1993 Aluminium and aluminium alloys. Wrought products. Temper designations
• DS/EN 515:2000 Aluminium and aluminium alloys - Wrought products - Temper designations
• DS/ISO 7415:1986 Plain washers for high-strength structural bolting, hardened and tempered

AGMA - American Gear Manufacturers Association, Temper

• 2007-B92-1992 Surface Temper Etch Inspection After Grinding
• 2007-C00-2000 Gears - Surface Temper Etch Inspection After Grinding

American Society of Mechanical Engineers (ASME), Temper

• ASME STP-PT-058-2013 TEMPER BEAD QUALIFICATION HARDNESS ACCEPTANCE CRITERIA
• ASME 2327-2001 Normalized and Tempered 9Cr-1Mo-1W-Cb Material Section I
• ASME SEC VIII D3 ART KF-6-2002 Article KF-6 Additional Fabrication Requirements for Quenched and Tempered Steels

GM North America, Temper

• GM GM61M-1988 Spring Materials Oil Tempered Carbon Steel Spring Wire
• GM GM177M-1988 Spring Materials Oil Tempered Chrome Vanadium Steel Spring Wire
• GM GM63M-1988 Spring Materials Oil Tempered Carbon Steel Valve Spring Wire
• GM GM292M-1998 Spring Materials - Oil Tempered Chromium-Silicon Steel Wire, Valve Spring Quality

German Institute for Standardization, Temper

• DIN 17022-1:1994 Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
• DIN EN 10343:2009-07 Steels for quenching and tempering for construction purposes - Technical delivery conditions; German version EN 10343:2009
• DIN EN 2031:2019-07 Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars; German and English version EN 2031:2018
• DIN EN 1173:1995 Copper and copper alloys - Material condition or temper designation; German version EN 1173:1995
• DIN EN 515:1993 Aluminium and aluminium alloys; wrought products; temper designations; German version EN 515:1993
• DIN EN 10089:2003 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
• DIN EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions; English version of DIN EN 10083-1:2006-10

American Petroleum Institute (API), Temper

• API Spec 2Y-2006(2020) Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures

Lithuanian Standards Office , Temper

• LST EN 515-2000 Aluminium and aluminium alloys - Wrought products - Temper designations

VN-TCVN, Temper

• TCVN 7693-2007 Gears.Surface temper etch inspection after grinding
• TCVN 6365-3-2006 Steel wire for mechanical springs.Part 3: Oil-hardened and tempered wire

Canadian Standards Association (CSA), Temper

• CSA C49.3-2010 Aluminum 1350 wire, annealed and intermediate tempers, for electrical purposes (Second Edition)

Standard Association of Australia （SAA）, Temper

• AS 3597:2008 Structural and pressure vessel steel - Quenched and tempered plate
• AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels

ES-UNE, Temper

• UNE-EN 2031:2018 Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars (Endorsed by Asociación Española de Normalización in October of 2018.)
• UNE-EN 2030:2013 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De <= 150 mm (Endorsed by AENOR in February of 2014.)

CH-SNV, Temper

• SNV 24562-1957

BE-NBN, Temper

• NBN-EN 515-1993 Aluminium and aluminium alloys. Wrought products. Temper designations

FI-SFS, Temper

• SFS 3829-1977

Professional Standard - Railway, Temper

• TB/T 2566-1995 Specifications for carburizing, quenching and tempering strengthening of locomotive traction gears

NL-NEN, Temper

• NEN-EN 10083-1-1992 Quenched and tempered steels. Part 1: Technical delivery conditions for special steels

Others:   heat treated tempered glass, full tempering, full temper, tempered steel, Quenched and tempered vacuum treated carbon and alloy steel forgings for pressure vessels, high temperature tempering, Alloy steel pressure vessel plate for high strength quenching and tempering, tempered steel, Temper, small tempering furnace, Vacuum quenching and tempering, Tempering furnace, Surface temper corrosion inspection, Tempering valve, Copper and Copper Alloy Temper Marks, tempered glass, Tempering valve, The tensile strength of the first part of steel seamless gas cylinder after quenching and tempering treatment is less than, Micro Tempering Furnace, Quenching and tempering.