ZH
RU
ES

Compressive Strength Unit

Compressive Strength Unit, Total:499 items.

In the international standard classification, Compressive Strength Unit involves: Non-metalliferous minerals, Metalliferous minerals, Construction materials, Telecommunications in general, Radiocommunications, Quantities and units, Mining and quarrying, Paper and board, Road vehicle systems, Adhesives, Ceramics, Road vehicles in general, Protection against fire, Plastics, Powder metallurgy, Coatings and related processes used in aerospace industry, Materials for aerospace construction, Earthworks. Excavations. Foundation construction. Underground works, Structures of buildings, Bridge construction, Fluid power systems, Elements of buildings, Rubber, Analytical chemistry, Cutting tools, Pulps, Wood technology processes, Reinforced plastics, Road engineering, Refractories, Raw materials for rubber and plastics, Products of the textile industry, Materials for the reinforcement of composites, Inorganic chemicals, Fertilizers, Pipeline components and pipelines, Civil engineering in general, Test conditions and procedures in general, Mechanical testing, Testing of metals, Fasteners, Equipment for the chemical industry, Seals, glands, Rubber and plastics products, Paper products, Protection of and in buildings, Products of the chemical industry, Glass, Construction industry, Chipless working equipment.

Standard Association of Australia （SAA）, Compressive Strength Unit

AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 4133.4.2.2:2013
AS 4133.4.2.1:2022 Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests — Determination of uniaxial compressive strength — Rock strength greater than 50 MPa
AS 4133.4.2.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength of 50 MPa and greater
AS 4133.4.3.2:2022 Methods of testing rocks for engineering purposes, Method 4.3.2: Rock strength tests — Determination of the deformability of rock materials and uniaxial compressive strength — Rock strength less than 50 MPa
AS 2313.1.13:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear (holding power) at ambient temperature

NZ-SNZ, Compressive Strength Unit

AS/NZS 3572.18:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 18: Method for Determining the Ultimate Tensile Strength and Unit Modulus of Flat Laminates

CL-INN, Compressive Strength Unit

Professional Standard - Railway, Compressive Strength Unit

TB/T 2328.13-1992 Test method for uniaxial compressive strength and saturated uniaxial compressive strength of railway gravel and ballast

Indonesia Standards, Compressive Strength Unit

SNI 13-6168-1999 Test methods of in situ uniaxial compressive strength for determining deformability and strength of weak rock
SNI 3638-2012 Metode uji kuat tekan-bebas tanah kohesif
SNI 3421-2011 Cara uji kuat tekan beton ringan isolasi

Korean Agency for Technology and Standards (KATS), Compressive Strength Unit

KS E 3033-2020 Method of test for uniaxial compressive strength of rock
KS F 2426-2010(2020) Standard test method for compressive strength of mortar grouting
KS F 2426-1968 Standard test method for compressive strength of mortar grouting
KS L 1203-2002 Testing method for compressive(crushing)strength of fired whiteware materials
KS R 1146-2012 Roof crush resistance test method
KS E 3033-2001 Method of test for compressive strength of rock
KS F 2519-2000 Testing method for compressive strength of natural building stone
KS M 3816-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 3816-1982 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS E 3033-1977 Method of test for compressive strength of rock
KS L 1203-1982 Testing method for compressive(crushing)strength of fired whiteware materials
KS F 2328-2002 Testing method for compressive strength of molded soil－cement cylinders
KS F 2405-2010 Standard test method for compressive strength of concrete
KS F 2405-1997 Standard test method for compressive strength of concrete
KS F 2405-2001 Standard test method for compressive strength of concrete
KS F 2328-1982 Testing method for compressive strength of molded soil－cement cylinders
KS F 2405-1982 Standard test method for compressive strength of concrete
KS F 2732-2018 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2732-2023 Standard test method for pull-out strength to conclude compressive strength of concrete
KS M ISO 9895:2009 Paper and board－Compressive strength－Short-span test
KS M ISO 9895:2019 Paper and board－Compressive strength－Short-span test
KS F 2326-2002 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2326-1982 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2351-2005 Testing method for the compressive strength of asphalt mixtures
KS F 2426-2010 Standard test method for compressive strength of mortar grouting
KS L 3503-2008 Method of test for crushing strength and modulus of rupture of castable refractories
KS L 3503-2013 Testing method for crushing strength and modulus of rupture of castable refractory
KS L 5105-2007 Testing method for compressive strength of hydraulic cement mortar
KS L 3314-2017 Testing method for mocompressive strength of insulating fire bricks
KS L 1623-2012(2022) Testing method for compressive strength of fine ceramic granules
KS L 3503-1982 Method of test for crushing strength and modulus of rupture of castable refractories
KS L 5105-1987 Testing method for compressive strength of hydraulic cement mortar
KS F 2454-2021 Standard test method for compressive strength of spun concrete
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS L 1203-2002(2022) Testing method for compressive(crushing)strength of fired whiteware materials
KS L 1203-2002(2017) Testing method for compressive(crushing)strength of fired whiteware materials
KS F 2431-2011 Standard test method for compressive strength of molded prepacked concrete cylinders
KS F 2454-2011(2016) Standard test method for compressive strength of spun concrete
KS M 7063-1-2021 Determination of edgewise crush resistance of corrugated fiberboard
KS F 2405-2010(2017) Standard test method for compressive strength of concrete
KS L 3314-2017(2022) Testing method for mocompressive strength of insulating fire bricks
KS F 2431-1986 Standard test method for compressive strength of molded prepacked concrete cylinders
KS F 2454-1986 Standard test method for compressive strength of spun concrete
KS F 2454-2011 Standard test method for compressive strength of spun concrete
KS M ISO 12192:2004 Paper and board-Compressive strength(Ring crush method)
KS F 2732-2008 Testing method for pullout strength to conclude compressive strength of concrete
KS F 2461-2000 Testing method for compressive strength of lightweight insulating concrete
KS L 1623-2012 Testing method for compressive strength of fine ceramic granules
KS D ISO 2739:2011 Sintered metal bushes-Determination of radial crushing strength
KS D 0051-2012 Sintered metal bushes－Determination of radial crushing strength
KS F 2461-2014 Testing method for compressive strength of lightweight insulating concrete
KS L 5105-2007(2017) Testing method for compressive strength of hydraulic cement mortar
KS L 5105-2022 Test method for compressive strength of hydraulic cement mortar
KS F 2461-1985 Testing method for compressive strength of lightweight insulating concrete
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 5473-2002(2022) Rubber－or plastics－coated fabrics－Determination of crush resistance
KS F 2733-2018 Standard test method for penetration resistance to conclude compressive strength of concrete
KS M ISO 5473-2002(2017) Rubber－or plastics－coated fabrics－Determination of crush resistance
KS F 2351-2020 Standard test method for the compressive strength of asphalt mixtures
KS F 2328-2002(2017) Testing method for compressive strength of molded soil－cement cylinders
KS L 1623-2012(2017) Testing method for compressive strength of fine ceramic granules
KS F 2328-2002(2022) Testing method for compressive strength of molded soil－cement cylinders
KS L 1601-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature

European Committee for Standardization (CEN), Compressive Strength Unit

EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength
EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
EN 679:1993 Determination of the Compressive Strength of Autoclaved Aerated Concrete
FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
prEN 679-1992 Determination of the compressive strength of autoclaved aerated concrete
EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength
EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
EN 12390-3-2019(F) Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2001 Testing Hardened Concrete - Part 3: Compressive Strength of Test Specimens
EN 1354:1996 Determination of Compressive Strength of Lightweight Aggregate Concrete with Open Structure
prEN 772-1-1992 Methods of test for masonry units; part 1: determination of compressive strength

International Telecommunication Union (ITU), Compressive Strength Unit

ITU-R V.665-2015 Traffic intensity unit
ITU-R V.665-2-2000 Traffic Intensity Unit
ITU-T B.18-1993 Traffic Intensity Unit
ITU-T B.18 (REV 1)-1993 Traffic Intensity Unit (Study Group II) 3 pp
ITU-T B.18 FRENCH-1993 Traffic Intensity Unit Study Group II
ITU-T B.18 SPANISH-1993 Traffic Intensity Unit Study Group II

National Metrological Technical Specifications of the People's Republic of China, Compressive Strength Unit

JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF(机械)1075-2021

National Metrological Verification Regulations of the People's Republic of China, Compressive Strength Unit

JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

American Society of Mechanical Engineers (ASME), Compressive Strength Unit

ASME SI-2-1976 SI units in strength of materials

AT-ON, Compressive Strength Unit

ONORM ISO 3035:1988 Packaging; single-faced and single-wall corrugated fibreboard; determination of flat crush resistance
ONORM B 3124 Teil.2-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial compressive strength of cubical specimens
ONORM B 3124 Teil.1-1981 Testing ot natural stone; Mechanical properties of rock; Uniaxial compressive strength ot cylindrical specimens

British Standards Institution (BSI), Compressive Strength Unit

BS EN 772-1:2011+A1:2015 Methods of test for masonry units - Determination of compressive strength
BS EN 1926:2006 Natural stone test methods — Determination of uniaxial compressive strength
BS EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
BS EN 1015-11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS ISO 12192:2011 Paper and board. Determination of compressive strength. Ring crush method
BS ISO 9895:2009 Paper and board. Compressive strength. Short-span test
BS ISO 9895:2008 Paper and board - Compressive strength - Short-span test
BS EN ISO 3035:2011 Corrugated fibreboard. Determination of flat crush resistance
BS EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
BS EN 12390-3:2002 Testing hardened concrete - Compressive strength of test specimens
BS EN 12390-3:2009 Testing hardened concrete - Compressive strength of test specimens
BS EN 14617-15:2005 Agglomerated stone - Test methods - Determination of compressive strength
BS EN 772-1:2011 Methods of test for masonry units. Determination of compressive strength
BS ISO 13821:2020 Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
BS EN ISO 2739:2012 Sintered metal bushings. Determination of radial crushing strength
BS EN 12390-4:2000 Testing hardened concrete - Compressive strength - Specification for testing machines
BS EN 772-1:2000 Methods of test for masonry units - Determination of compressive strength
BS EN 12390-4:2019 Testing hardened concrete - Compressive strength - Specification for testing machines
BS ISO 22685:2021 Refractory products. Determination of compressive strength at elevated temperature
20/30408795 DC BS ISO 24126. Refractory products. Determination of compressive strength at elevated temperature
BS 7325:1990 Method for determination of the compressive strength of paper and board by the short span test

AENOR, Compressive Strength Unit

UNE 22950-1:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 1. UNIAXIAL COMPRESSIVE STRENGTH
UNE-EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
UNE 49408-3:1974 TEST OF PAPER BAGS. COMPRESSIVE STRENGTH
UNE-EN 12808-3:2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
UNE-EN 679:2006 Determination of the compressive strength of autoclaved aerated concrete
UNE-ISO 12192:2017 Paper and board. Determination of compressive strength. Ring crush method
UNE-EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
UNE-EN 1015-11:2000/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
UNE-EN 1015-11:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
UNE 67038:1986 HOLLOW CLAY BLOCKS FOR FLOOR. COMPRESSIVE STRENGTH TEST
UNE-EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
UNE 22950-4:1992 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 4: TRIAXIAL COMPRESSION STRENGTH
UNE-EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
UNE-EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

FI-SFS, Compressive Strength Unit

SFS 4474-1980

American National Standards Institute （ANSI), Compressive Strength Unit

ANSI/T 826 OM-2021 Short span compressive strength of containerboard
ANSI/ASTM C695:2015 Standard Test Method for Compressive Strength of Carbon and Graphite

Professional Standard - Coal, Compressive Strength Unit

MT/T 793-1998 Testing of shear strength for rock mass in situ
MT 44-1987 Determination method of unidirectional compressive strength and softening coefficient of coal and rock
MT/T 44-1987 Determination method of unidirectional compressive strength and softening coefficient of coal and rock
MT/T 47-1987 Method for determination of unidirectional tensile strength of coal and rock
MT 47-1987 Method for determination of unidirectional tensile strength of coal and rock

German Institute for Standardization, Compressive Strength Unit

DIN EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength; English version of DIN EN 1926:2007-03
DIN EN 1926:2007-03 Natural stone test methods - Determination of uniaxial compressive strength; German version EN 1926:2006
DIN EN 772-1:2016 Methods of test for masonry units - Part 1: Determination of compressive strength; German and English version EN 772-1:2011+A1:2015
DIN EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997
DIN EN 679:2005-09 Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
DIN EN 12808-3:2009 Grouts for tiles - Determination of flexural and compressive strength; English version of DIN EN 12808-3:2009-01
DIN EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
DIN EN ISO 3035:2012-02 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011); German version EN ISO 3035:2011
DIN 54518:2022-01 Testing of paper and board - Compression strength, short span test
DIN EN 1015-11:2020-01 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar; German version EN 1015-11:2019
DIN 51104:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength
DIN-Fachbericht ISO/TR 24857:2007 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
DIN EN 1351:1997-02 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN ISO 2739:2012-10 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012); German version EN ISO 2739:2012
DIN EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002

Danish Standards Foundation, Compressive Strength Unit

DS/EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
DS/EN 12808-3:2008 Grouts for tiles - Part 3: Determination of flexural and compressive strength
DS/EN 772-1:2011 Methods of test for masonry units - Part 1: Determination of compressive strength
DS/EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
DS/EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
DS/EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance
DS/EN 1015-11/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS/EN 1015-11:2002 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS/EN 23035:1994 Single-faced and single-wall corrugated fibreboard-Determination of flat crush resistance
DS/EN 1351:1998 Determination of flexural strength of autoclaved aerated concrete
DS/EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
DS/EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
DS/EN 772-6:2001 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units

Lithuanian Standards Office , Compressive Strength Unit

LST EN 1926-2007 Natural stone test methods - Determination of uniaxial compressive strength
LST EN 12808-3-2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
LST EN 772-1-2011 Methods of test for masonry units - Part 1: Determination of compressive strength
LST EN 679-2005 Determination of the compressive strength of autoclaved aerated concrete
LST EN 13892-2-2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
LST 1551.1-1999/1K-2002 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
LST 1551.1-1999 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
LST EN 1015-11-2002 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1015-11-2002/A1-2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1351-2000 Determination of flexural strength of autoclaved aerated concrete
LST EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
LST EN 594-2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
LST EN 772-6-2003 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units

未注明发布机构, Compressive Strength Unit

BS EN 1926:2006(2007) Natural stone test methods — Determination of uniaxial compressive strength

Association Francaise de Normalisation, Compressive Strength Unit

NF EN 1926:2007 Méthodes d'essai des pierres naturelles - Détermination de la résistance en compression uniaxiale
NF P12-101-1*NF EN 772-1+A1:2015 Methods of test for masonry units - Part 1 : determination of compressive strength
NF P12-101-1/IN1*NF EN 772-1/IN1:2015 Methods of test for masonry units - Part 1 : determination of compressive strength
NF P94-423:2002 Roches - Détermination de la résistance à la compression triaxiale
NF ISO 12192:2011 Papier et carton - Détermination de la résistance à la compression - Méthode d'écrasement en anneau
NF EN 679:2005 Détermination de la résistance à la compression du béton cellulaire autoclavé
NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
NF ISO 22685:2022 Produits réfractaires - Détermination de la résistance à la compression à température élevée
NF P19-104:1994 Determination of the compressive strength of autoclaved aerated concrete.
NF P19-104*NF EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
NF EN ISO 2739:2012 Bagues en métal fritté - Détermination de la résistance à l'écrasement radial
NF A95-325*NF EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength.
NF P14-204-2*NF EN 13892-2:2003 Methods of test for screed materials - Part 2 : determination of flexural and compressive strength
NF P61-611-3*NF EN 12808-3:2009 Grouts for tiles - Part 3 : determination of flexural and compressive strength
NF EN 1351:1997 Détermination de la résistance à la traction par flexion du béton cellulaire autoclavé
NF ISO 4602:2011 Renforts - Tissus - Détermination du compte de fils de chaîne et de duites par unité de longueur

CZ-CSN, Compressive Strength Unit

CSN 72 2449-1968 Testing of compressive strength of mortar
CSN ISO 4012:1994 Concrete.Determination of compressive strength of test specimens
CSN 44 1825-1981 Iron ore pellets. Method of determination of crushing strength
CSN 72 5015-1982 Testing of ceramic electrotechnic materials. Definítion of the compressive strength
CSN 42 0891 Cast.10-1986 Testing of sintered products. Determination of radial crushing strength
CSN 72 1025-1992 Laboratory determination of unconfined compressive strenght of cohesive soils

GM Europe, Compressive Strength Unit

GME GMI L-1C-1-1997 Roof Crush Resistance Test (English/German)

IN-BIS, Compressive Strength Unit

PK-PSQCA, Compressive Strength Unit

PS 151-1961 Method for Determination of Tensile strength and elongation of single yarns.

American Society for Testing and Materials (ASTM), Compressive Strength Unit

ASTM C918-02 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM D3880-90(1999) Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004)e1 Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004) Standard Test Method for Asbestos Strength Units
ASTM D3880/D3880M-90(2017) Standard Test Method for Asbestos Strength Units
ASTM C1424-15 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D3313-99 Standard Test Method for Carbon Black-Individual Pellet Hardness
ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4786-00(2010) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D3313-12e1 Standard Test Method for Carbon Black&x2014;Individual Pellet Hardness
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units
ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM C918-97e1 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918/C918M-20 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C695-91(2005) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C918/C918M-07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918/C918M-13 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C1006-84(2001) Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006-84(1996)e1 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-19 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-20 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-20a Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1314-18 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-03b Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170-90(1999) Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1194-03 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1314-07 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-03a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-01 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-00a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-02a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-02 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-09 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1194-91 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1314-21 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C695-15(2020) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C1314-22 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM E447-74 Standard Test Methods for Compressive Strength Of Masonry Prisms
ASTM C1314-12 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-17 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170-17(2017) Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1314-23 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-22a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1194-03(2011) Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C170/C170M-15 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1314-09 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-23a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-11a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-15b Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M-16 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C695-15 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM C348-19 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
ASTM C1194-02 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM D2166-06 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM F1574-03a Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-95 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-03 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-03a(2009) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM C695-91(2010) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C348-20 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
ASTM C348-18 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
ASTM C1314-14 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-14a Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M-15a Standard Test Method for Compressive Strength of Dimension Stone
ASTM D2166/D2166M-13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D4555-10 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
ASTM C773-88(2006) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM C39/C39M-20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-11a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D2166-00 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D2166-00e1 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-99 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-03 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Japanese Industrial Standards Committee (JISC), Compressive Strength Unit

JIS P 8126:2005 Paper and board -- Compressive strength -- Ring crush method
JIS A 1136:2022 Method of test for compressive strength of spun concrete
JIS P 8126:2015 Paper and board -- Determination of compressive strength -- Ring crush method
JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
JIS A 1108:1993 Method of test for compressive strength of concrete
JIS A 1108:1999 Method of test for compressive strength of concrete
JIS A 1108:2006 Method of test for compressive strength of concrete
JIS A 1108:2018 Method of test for compressive strength of concrete
JIS K 7093:2012 Test method for open-hole compressive strength of carbon fibre reinforced plastic
JIS M 8718:1993 Iron ore pellets -- Determination of crushing strength
JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
JIS R 2206:1991 Testing method for cold crushing strength of refractory bricks
JIS A 1136:1993 Method of test for compressive strength of spun concrete
JIS A 1182:1995 Method of test for compressive strength of polyester resin concrete
JIS A 1136:2018 Method of test for compressive strength of spun concrete
JIS Z 2507:2000 Sintered metal bearing -- Determination of radial crushing strength

GOSTR, Compressive Strength Unit

GOST R 58527-2019 Wall materials. Methods for determination of ultimate compressive and bending strength

SE-SIS, Compressive Strength Unit

SIS SS 13 75 20-1981 Mortars — Testing — Compressive strength
SIS SEN 04 05 15
SIS SS 13 73 07-1982 Autoclaved aerated concrete - Determination of compressive strength
SIS SS 13 75 10-1982 Concrete testing - Cement mortar for joints - Compresslve strength
SIS 11 22 52-1974 Sintered metal bushes. Determination of radial crushing strength
SIS SS 13 75 10-1984 Concrete testing - Cement mortar for joints - Compressive strength
SIS SS 13 75 33-1984 Concrete testing — Hardened mortar for injection — Compressive strength
SIS SS 13 75 33-1980 Concrete testing — Harde ned mortar for injection — Compressive strength
SIS SS 13 72 30-1983 Concrete testing - Hardened concrete - Compressive strength of est specimens

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compressive Strength Unit

GB 26134-2010 Roof crush resistance of passenger cars
GB/T 43091-2023 Powder compressive strength test method
GB/T 2832-1996 Test method for crushing strength of vitrified pipe
GB/T 14201-1993 Iron ore pellets--Determination of crushing strength
GB/T 1935-2009 Methods of testing in compressive strength parallel to grain of wood
GB/T 4740-1999 Standard test method for compressive resistance ceramic materials
GB/T 1935-1991 Method of testing in compressive strength parallel to grain of wood
GB/T 22874-2008 Single-faced and single-wall corrugated fibreboard.Determination of flat crush resistance
GB/T 15231.2-1994 Test methods for the properties of glass fibre reinforced cement. The compressive strength
GB/T 10516-1989 The determination of average crushing strength for nitrophosphate
GB/T 22307-2008 Standard test method for compressive strength of gasket at elevated temperatures
GB/T 25183-2010 Paste for compressive strength test of wall brick
GB 10516-1989 The determination of average crushing strength for nitrophosphate
GB/T 19496-2004 Determinating of the compressive strength of spun high-strength concrete cores
GB/T 3780.16-1983 Carbon black--Determination of individual pellet crush strength
GB/T 10424-2002 Sintered metal friction materials--Determination of compressive strength
GB/T 13465.3-2002 Test method for compressive strength of impermeable graphite materials
GB/T 11837-1989 Test methods of the concrete compressive strength of concrete pipes for water
GB/T 11837-2009 Test methods of the concrete compressive strength of concrete pipes for water

Taiwan Provincial Standard of the People's Republic of China, Compressive Strength Unit

CNS 5367-1980 Method of Test for Compressive Strength of Rock
CNS 616-1990 Method of Test for Cold Crushing Strength of Refractory Bricks
CNS 3187-1976 Method of Test for Compressive Strength of Chemical Stoneware
CNS 13585-1995 Method of Test for Compressive and Flexuval Strength of Alumina Cement Mortar
CNS 5139-1980 Method of Test for Crushing Strength Direction of Ebonite
CNS 11319-2000 Method of Test for Compressive Strength of Natural Building Stone
CNS 7408-1981 Compression Test for Rigic Materials of Cellular Plastics
CNS 1232-2002 Method of test for compressive strength of cylindrical concrete specimens
CNS 13176-1993 Method of Test for Compressive Strength of Polyester Resin Concrete
CNS 2889-1984 Method of Test for Compressive (Crushing) Strength of Fired Whiteware Clay Materials
CNS 5809-1980 Methods of Test for Strength Properties of Adhesives in Shear by Compression Loading

RO-ASRO, Compressive Strength Unit

STAS 1245/4-1974 PLYWOOD Determination of compression strength
STAS 7563-1973 TESTS OF CONCRETE FAST METHOD FOR THE DETERMINATION OFCOMPRESSIVE STRENGTH
STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength

HU-MSZT, Compressive Strength Unit

RU-GOST R, Compressive Strength Unit

GOST R ISO 9895-2013 Raper and board. Compressive strength. Short-span test
GOST R 57290-2016 Masonry. Method of determination of compressive strength
GOST 24765-1981 Iron pellets. Method for the determination of compression strength
GOST 8462-1985 Wall materials. Methods for determination of ultimate compressive and bending strength
GOST R 57338-2016 Mortars for masonry. Method of determination of flexural and compressive strength
GOST R 57349-2016 Bricks and blocks. Compressive strength determination method
GOST 21153.2-1984 Rocks. Methods for determination of axial compression strength
GOST R 57963-2017 Hollow glass microspheres. Method for determination of compressive strength
GOST 24157-1980 Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 23409.7-1978 Moulding sands, moulding and core sand mixtures. Methods for determination of compressive, tensile, bending and shearing strength
GOST R 57360-2016 Construction of concrete prefabricated. Determination of strength of concrete in compression

ES-UNE, Compressive Strength Unit

UNE-ISO 9895:2019 Paper and board. Compressive strength. Short-span test
UNE-EN 1015-11:2020 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

YU-JUS, Compressive Strength Unit

JUS B.B8.012-1987 Natural stone. Testing of compressive slrength
JUS D.A8.070-1985 Testing ofplywood. Determination of compressive strength
JUS U.M1.021-1997 Concrete - Classification by compressive strength
JUS D.A8.092-1984 Testing of fibre building boards. Determination of compressive strength

International Organization for Standardization (ISO), Compressive Strength Unit

ISO 3893:1977 Concrete; Classification by compressive strength
ISO 4012:1978 Concrete; Determination of compressive strength of test specimens
ISO 2474:1972 Ebonite; Determination of crushing strength
ISO 9895:2008 Paper and board - Compressive strength - Short-span test
ISO 4700:1996 Iron ore pellets - Determination of crushing strength
ISO 9895:1989 Paper and board; compressive strength; short span test
ISO/TR 24857:2006 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
ISO 3035:1982 Single-faced and single-wall corrugated fibreboard; Determination of flat crush resistance
ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
ISO 12192:2002 Paper and board - Compressive strength - Ring crush method
ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
ISO 2739:2006 Sintered metal bushes - Determination of radial crushing strength
ISO 2739:1973 Sintered metal bushes; Determination of radial crushing strength

KR-KS, Compressive Strength Unit

KS F 2405-2022(英文版) Test method for compressive strength of concrete
KS F 2405-2022 Test method for compressive strength of concrete
KS M ISO 9895-2019 Paper and board－Compressive strength－Short-span test
KS F 2732-2018(2023) Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2730-2008(2023) Testing method for rebound number to conclude compressive strength of concrete

TR-TSE, Compressive Strength Unit

TS 245-1965 METHOD OF DETERMINING THE TENSILE STRENGHT AND ELNGATION OF A SINGLE STRAND YARN
TS 2028-1975 DETERMINATION OF UNCONFINED COMPBESSIVE STRENGTH OF R0CKS
TS 2026-1975 DETERMINATION OF COMPRESSIVE STRENGTH OF IRON ORE PELLETS
TS 3289-1979 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE INSULATING CONCRETE TEST SPECIMENS

Professional Standard - Traffic, Compressive Strength Unit

JT/T 1166-2017 Non destructive testing for compressive strength of high strength concrete of bridges

ES-AENOR, Compressive Strength Unit

NL-NEN, Compressive Strength Unit

NEN-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete
NEN 5988-1992 Concrete - Determination of compressive strength - Hardening test
NEN 5968-1988 Concrete and mortar- Determination of the compressive strength of test specimens

NO-SN, Compressive Strength Unit

NS-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete

IT-UNI, Compressive Strength Unit

UNI ISO 2941:1978 Hydraulic fluid power. Filter elements. Verification of collapse/burst resistence.
UNI 7549-P7-1976
UNI 7531-1976

Professional Standard - Petroleum, Compressive Strength Unit

SY/T 5276-2000 Determination of flexural strength, compressive strength and gas permeability of chemical sand control artificial core

Professional Standard - Water Conservancy, Compressive Strength Unit

SL 237-031-1999 Code for test of soil - uniaxial tensile strength test
SL 237-020-1999 Code for test of soil - unconfined compression strength test

VN-TCVN, Compressive Strength Unit

TCVN 6025-1995 Concrete.Classification by compressive strength
TCVN 6895-2008 Paper and board.Compressive strength.Short span test
TCVN 3118-1993 Heavy weight concrete.Method for the determination of compressive strength
TCVN 3121-11-2003 Mortar for masonry.Test methods.Part 11: Determination of flexural and compressive strength of hardened mortars
TCVN 6355-2-2009 Bricks.Test methods.Part 2: Determination of compressive strength

PT-IPQ, Compressive Strength Unit

E 156-1964

PL-PKN, Compressive Strength Unit

PN H04061-1992 Iron ore pellets. Determination of crushing strength
PN D04215-1965 Lignofol and Lignostone. Determi- nation of compressive strength
PN H04941-1986 Sintered metal materials Determination of radial crushing strength
PN C82055-01-1991 Test methods of pressed carbon products Determination of compressivestrength
PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents

SAE - SAE International, Compressive Strength Unit

SAE ARP4457-1992 Torsion Strength Testing of Hydraulic Tube Joints
SAE ARP4457-1998 Torsion Strength Testing of Hydraulic Tube Joints

Professional Standard - Machinery, Compressive Strength Unit

JB/T 7988.1-1999 Super-hard abrasive Measurement method of compressive strength
JB/T 10985-2010 Superabrasive-Testing method of compressive strength

Society of Automotive Engineers (SAE), Compressive Strength Unit

SAE ARP4457-2013 Torsion Strength Testing of Hydraulic Tube Joints

工业和信息化部, Compressive Strength Unit

JB/T 10985-2020 Method for determination of compressive strength of superhard abrasives
JC/T 1098-2009 Standard grout for compressive strength test of wall bricks

住房和城乡建设部, Compressive Strength Unit

JG/T 520-2018 Test method for compressive strength of extruded concrete

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Compressive Strength Unit

ITU-R V.665-1-1990 Traffic Intensity Unit - Section C - Other Means of Expression

BR-ABNT, Compressive Strength Unit

ABNT MB-1317-1979

Professional Standard - Public Safety Standards, Compressive Strength Unit

GA 406-1996 Manufactured Housing Recommendations: Gypsum Board Compressive Strengths

ACI - American Concrete Institute, Compressive Strength Unit

ACI 214.4R-2010 Guide for Obtaining Cores and Interpreting Compressive Strength Results
ACI 214.4R-2003 Guide for Obtaining Cores and Interpreting Compressive Strength Results

Professional Standard - Recommended Standards for Engineering Construction, Compressive Strength Unit

CECS 278-2010 Technical specification for testing of concrete compressive strength by shear-pressure method

IX-SA, Compressive Strength Unit

AS 1141.51:1985

Anhui Provincial Standard of the People's Republic of China, Compressive Strength Unit

DB34/T 569-2022 Technical specification for testing the compressive strength of concrete by shear compression method
DB34/T 233-2022 Technical specification for testing the compressive strength of mortar by penetration method

Ningxia Provincial Standard of the People's Republic of China, Compressive Strength Unit

DB64/T 1647-2019 Technical specification for testing the compressive strength of high-strength concrete by rebound method

The American Road & Transportation Builders Association, Compressive Strength Unit

AASHTO T 276-2010 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
AASHTO T 276-2015 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
AASHTO T 132-1987 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars

AASHTO - American Association of State Highway and Transportation Officials, Compressive Strength Unit

T 276-2010 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2017 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2015 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2009 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 167-2005 Standard Method of Test for Compressive Strength of Hot-Mix Asphalt
T167-1994 Standard Method of Test for Compressive Strength of Bituminous Mixtures

Professional Standard - Ferrous Metallurgy, Compressive Strength Unit

YB/T 5201-1993 Test method for room temperature flexural strength and compressive strength of dense refractory castables

Professional Standard - Construction Industry, Compressive Strength Unit

JGJ/T 234-2011 Technical specification for testing the compressive strength of masonry mortar by selective pressure method
JG/T 3023-1995 Test method of concrete compressive strength for extrution hollow cored slab
JGJ/T 23-2001 Technical specification for inspection of concrete compressive strength by rebound method
JGJ/T 23-2001（条文说明） Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
JGJ/T 23-2011 Technical specification for inspecting of concrete compressive strength by rebound method
JGJ/T 23-1992 Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method(explanation)
JGJ/T 378-2016 Technical specification for testing the compressive strength of concrete by pull-off method
JGJ/T 136-2017 Technical specification for testing compressive strength of masonry mortar by penetration resistance method
JGJ/T 136-2001 Technical specification for testing compressive strength of masonry mortar by penetration resistance method

CEN - European Committee for Standardization, Compressive Strength Unit

PREN 1015-11-2017 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

Military Standard of the People's Republic of China-General Armament Department, Compressive Strength Unit

GJB 771.104-1991 Gunpowder performance test methods Compressive strength test
GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
GJB 1798-1993 Test method for static pressure damage resistance of aircraft glass

Hebei Provincial Standard of the People's Republic of China, Compressive Strength Unit

DB1310/T 297-2023 Test method for compressive strength of autoclaved aerated concrete
DB13/T 5385-2021 Technical requirements for robot detection of concrete compressive strength

Professional Standard - Geology, Compressive Strength Unit

DZ/T 0276.18-2015 Regulation for testing the physical and mechanical properties of rock.Part 18:Test for determing the uniaxial compressive strength of rock

BE-NBN, Compressive Strength Unit

NBN 874-1971
NBN EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete

Professional Standard - Forestry, Compressive Strength Unit

LY/T 1411-1999 Laminated wood plastics.Compreg Determination of compression Strength parallel to face grain

US-FCR, Compressive Strength Unit

FCR COE CRD-C 643-01-2001 STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF MASONRY PRISMS

Professional Standard - Aviation, Compressive Strength Unit

HB 5367.1-1986 Test method for compressive strength of carbon graphite sealing materials

TH-TISI, Compressive Strength Unit

TIS 409-1982 Standard test method for compressive strength of concrete specimens

Electronic Components, Assemblies and Materials Association, Compressive Strength Unit

ECA EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors

ECIA - Electronic Components Industry Association, Compressive Strength Unit

EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
RS-364-08A-1983 TP-08A Crimp Tensile Strength Test Procedure for Electrical Connectors

Shandong Provincial Standard of the People's Republic of China, Compressive Strength Unit

DB37/T 2368-2013 Technical specification for testing the compressive strength of concrete by core drilling method
DB37/T 2366-2013 Technical specification for testing the compressive strength of concrete by rebound method
DB37/T 2368-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Core Drilling Method
DB37/T 2366-2022 Technical Regulations for Testing the Compressive Strength of Concrete by Rebound Method
DB37/T 2369-2022 Technical Regulations for Testing the Compressive Strength of Masonry Mortar by Mortar Sheet Partial Pressure Method

Yunnan Provincial Standard of the People's Republic of China, Compressive Strength Unit

DB53/T 715-2015 Technical specification for testing the compressive strength of concrete by pull-off method

Professional Standard - Building Materials, Compressive Strength Unit

JC/T 2285-2014 Test method for isostatic compression strength (microspheres-gas compression) for hollow glass microspheres

Group Standards of the People's Republic of China, Compressive Strength Unit

T/CECS 916-2021 Technical specification for testing the compressive strength of autoclaved aerated concrete by penetration method

能源部, Compressive Strength Unit

SY 5276-1991 Method for determination of flexural strength, compressive strength and permeability of chemical sand control artificial cores

CY-CYS, Compressive Strength Unit

CYS 148-1985 CYPRUS STANDARD CONCRETE - CLASSIFICATION BY COMPRESSIVE STRENGTH