ZH
RU
ES

unit of compressive strength

unit of compressive strength, Total:470 items.

In the international standard classification, unit of compressive strength involves: Non-metalliferous minerals, Construction materials, Metalliferous minerals, Quantities and units, Mining and quarrying, Adhesives, Structures of buildings, Ceramics, Paper and board, Elements of buildings, Earthworks. Excavations. Foundation construction. Underground works, Analytical chemistry, Coatings and related processes used in aerospace industry, Materials for aerospace construction, Raw materials for rubber and plastics, Products of the textile industry, Inorganic chemicals, Refractories, Powder metallurgy, Mechanical testing, Testing of metals, Road vehicle systems, Fasteners, Road engineering, Seals, glands, Paper products, Glass, Commercial vehicles, Fluid power systems, Cutting tools, Transformers. Reactors, Chipless working equipment, Test conditions and procedures in general, Equipment for the chemical industry, Wood, sawlogs and sawn timber, Fertilizers, Reinforced plastics, Iron and steel products, Rubber and plastics products.

NZ-SNZ, unit of compressive strength

AS/NZS 3572.18:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 18: Method for Determining the Ultimate Tensile Strength and Unit Modulus of Flat Laminates

Standard Association of Australia （SAA）, unit of compressive strength

AS 1012.14:2018 Methods of testing concrete, Method 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 4133.4.2.2:2013
AS 4133.4.2.1:2022 Methods of testing rocks for engineering purposes, Method 4.2.1: Rock strength tests — Determination of uniaxial compressive strength — Rock strength greater than 50 MPa
AS 4133.4.2.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength of 50 MPa and greater
AS 4133.4.3.2:2022 Methods of testing rocks for engineering purposes, Method 4.3.2: Rock strength tests — Determination of the deformability of rock materials and uniaxial compressive strength — Rock strength less than 50 MPa
AS 2313.1.13:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear (holding power) at ambient temperature
AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
AS 5101.4:2008 Methods for preparation and testing of stabilized materials - Unconfined compressive strength of compacted materials
AS/NZS 1301.450rp:2006 Methods of test for pulp and paper - Compression strength of paper and board - Short span test

CL-INN, unit of compressive strength

Indonesia Standards, unit of compressive strength

SNI 13-6168-1999 Test methods of in situ uniaxial compressive strength for determining deformability and strength of weak rock
SNI TAPPI T 824 om-2010 Kertas medium - Ketahanan tekan tepi medium gelombang (metode pelat lentur)
SNI 03-6429-2000 Test methods for compressive strength of concrete cylinders cast in place in cylindrical mold
SNI 1974-2011 Cara uji kuat tekan beton dengan benda uji silinder

European Committee for Standardization (CEN), unit of compressive strength

EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
prEN 679-1992 Determination of the compressive strength of autoclaved aerated concrete
FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength
EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
EN 1926:1999 Natural Stone Test Methods - Determination of Compressive Strength
EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength
EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
EN 1354:1996 Determination of Compressive Strength of Lightweight Aggregate Concrete with Open Structure
prEN 772-1-1992 Methods of test for masonry units; part 1: determination of compressive strength
EN ISO 2739:1998 Sintered Metal Bushes - Determination of Radial Crushing Strength ISO 2739:1973
EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength

Professional Standard - Railway, unit of compressive strength

TB/T 2328.13-1992 Test method for uniaxial compressive strength and saturated uniaxial compressive strength of railway gravel and ballast

Korean Agency for Technology and Standards (KATS), unit of compressive strength

KS E 3033-2020 Method of test for uniaxial compressive strength of rock
KS F 2732-2018 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2732-2023 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2326-2002 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2326-1982 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2426-2010 Standard test method for compressive strength of mortar grouting
KS F 2454-2021 Standard test method for compressive strength of spun concrete
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS F 2431-2011 Standard test method for compressive strength of molded prepacked concrete cylinders
KS M 7063-1-2021 Determination of edgewise crush resistance of corrugated fiberboard
KS F 2405-2010(2017) Standard test method for compressive strength of concrete
KS L 3314-2017(2022) Testing method for mocompressive strength of insulating fire bricks
KS F 2431-1986 Standard test method for compressive strength of molded prepacked concrete cylinders
KS L 1203-2002(2022) Testing method for compressive(crushing)strength of fired whiteware materials
KS L 1203-2002(2017) Testing method for compressive(crushing)strength of fired whiteware materials
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS F 2454-2011 Standard test method for compressive strength of spun concrete
KS M ISO 12192:2004 Paper and board-Compressive strength(Ring crush method)
KS L 1623-2012(2017) Testing method for compressive strength of fine ceramic granules
KS F 2461-2000 Testing method for compressive strength of lightweight insulating concrete
KS L 1623-2012 Testing method for compressive strength of fine ceramic granules
KS D ISO 2739:2011 Sintered metal bushes-Determination of radial crushing strength
KS D 0051-2012 Sintered metal bushes－Determination of radial crushing strength
KS F 2461-1985 Testing method for compressive strength of lightweight insulating concrete
KS F 2732-2008 Testing method for pullout strength to conclude compressive strength of concrete
KS F 2461-2000(2010) Testing method for compressive strength of lightweight insulating concrete
KS M ISO 5473-2002(2022) Rubber－or plastics－coated fabrics－Determination of crush resistance
KS F 2733-2018 Standard test method for penetration resistance to conclude compressive strength of concrete
KS M ISO 5473-2002(2017) Rubber－or plastics－coated fabrics－Determination of crush resistance
KS F 2351-2020 Standard test method for the compressive strength of asphalt mixtures
KS F 2481-2009 Standard test method for compressive strength of polyester resin concrete
KS F 2730-2008 Testing method for rebound number to conclude compressive strength of concrete
KS F 2519-2020 Standard test method for compressive strength of natural building stone
KS F 2431-2021 Standard test method for compressive strength of prepacked concrete
KS M ISO 13821:2020 Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
KS F 2731-2008 Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS F 2731-2023 Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS F 2733-2008 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2481-2014 Standard test method for compressive strength of polyester resin concrete
KS F 2733-2023 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2431-2011(2016) Standard test method for compressive strength of molded prepacked concrete cylinders
KS F 2731-2008(2018) Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS L 1601-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS F 2459-2017(2022) Testing methods for density, water content,absorption and compressive strength of cellular concrete

American Society of Mechanical Engineers (ASME), unit of compressive strength

ASME SI-2-1976 SI units in strength of materials

British Standards Institution (BSI), unit of compressive strength

BS EN 772-1:2011+A1:2015 Methods of test for masonry units - Determination of compressive strength
BS EN 1926:2006 Natural stone test methods — Determination of uniaxial compressive strength
BS EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
BS ISO 12192:2011 Paper and board. Determination of compressive strength. Ring crush method
BS EN 1015-11:2019 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
BS EN ISO 3035:2011 Corrugated fibreboard. Determination of flat crush resistance
BS EN 772-1:2011 Methods of test for masonry units. Determination of compressive strength
BS EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
BS EN 12390-3:2002 Testing hardened concrete - Compressive strength of test specimens
BS EN 12390-3:2009 Testing hardened concrete - Compressive strength of test specimens
BS EN 772-1:2000 Methods of test for masonry units - Determination of compressive strength
BS EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
BS EN ISO 2739:2012 Sintered metal bushings. Determination of radial crushing strength
BS ISO 13821:2020 Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS ISO 22685:2021 Refractory products. Determination of compressive strength at elevated temperature
20/30408795 DC BS ISO 24126. Refractory products. Determination of compressive strength at elevated temperature
BS 7325:1990 Method for determination of the compressive strength of paper and board by the short span test
BS EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
BS EN 14488-2:2006 Testing sprayed concrete - Compressive strength of young sprayed concrete
BS EN 12390-3:2019 Tracked Changes. Testing hardened concrete. Compressive strength of test specimens
BS ISO 8942:2010 Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength
BS F 157:2006 Properties of high tear strength silicone rubber sheet, mouldings and extrusions - Specification

AT-ON, unit of compressive strength

ONORM ISO 3035:1988 Packaging; single-faced and single-wall corrugated fibreboard; determination of flat crush resistance
ONORM B 3124 Teil.2-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial compressive strength of cubical specimens
ONORM B 3124 Teil.1-1981 Testing ot natural stone; Mechanical properties of rock; Uniaxial compressive strength ot cylindrical specimens
ONORM EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete

National Metrological Technical Specifications of the People's Republic of China, unit of compressive strength

JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF(机械)1075-2021

National Metrological Verification Regulations of the People's Republic of China, unit of compressive strength

JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

AENOR, unit of compressive strength

UNE 22950-1:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 1. UNIAXIAL COMPRESSIVE STRENGTH
UNE-EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
UNE-EN 12808-3:2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
UNE-EN 679:2006 Determination of the compressive strength of autoclaved aerated concrete
UNE-ISO 12192:2017 Paper and board. Determination of compressive strength. Ring crush method
UNE-EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
UNE-EN 1015-11:2000/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
UNE-EN 1015-11:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
UNE-EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
UNE-EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
UNE 22950-4:1992 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 4: TRIAXIAL COMPRESSION STRENGTH
UNE-EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
UNE-EN 1052-1:1999 SETHODS OF TEST FOR MASONRY - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
UNE-EN 14617-15:2006 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
UNE-EN 1354:2007 Determination of compressive strength of lightweight aggregate concrete with open structure
UNE-EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
UNE-EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
UNE-EN 13791:2009 Assessment of in-situ compressive strength in structures and precast concrete components
UNE 137001:2003 Empty corrugated and solid fibreboard packaging. Determination of the compression strength.

Professional Standard - Coal, unit of compressive strength

MT/T 793-1998 Testing of shear strength for rock mass in situ
MT 44-1987 Determination method of unidirectional compressive strength and softening coefficient of coal and rock
MT/T 44-1987 Determination method of unidirectional compressive strength and softening coefficient of coal and rock

German Institute for Standardization, unit of compressive strength

DIN EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength; English version of DIN EN 1926:2007-03
DIN EN 1926:2007-03 Natural stone test methods - Determination of uniaxial compressive strength; German version EN 1926:2006
DIN EN 772-1:2016 Methods of test for masonry units - Part 1: Determination of compressive strength; German and English version EN 772-1:2011+A1:2015
DIN EN 679:2005-09 Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
DIN EN 12808-3:2009 Grouts for tiles - Determination of flexural and compressive strength; English version of DIN EN 12808-3:2009-01
DIN EN ISO 3035:2012-02 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011); German version EN ISO 3035:2011
DIN 54518:2022-01 Testing of paper and board - Compression strength, short span test
DIN 51104:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength
DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
DIN EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997
DIN EN 1351:1997-02 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN 1015-11:2020-01 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar; German version EN 1015-11:2019
DIN EN ISO 2739:2012-10 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012); German version EN ISO 2739:2012
DIN 51910:2020-12 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 5014:2019 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN 5014:2019-04 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN-Fachbericht ISO/TR 24857:2007 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
DIN 18554-1:1985 Testing of masonry; determination of compressive strenght and of elastic modulus
DIN EN 772-1:2016-05 Methods of test for masonry units - Part 1: Determination of compressive strength; German and English version EN 772-1:2011+A1:2015
DIN EN 1052-1:1998-12 Methods of test for masonry - Part 1: Determination of compressive strength; German version EN 1052-1:1998
DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
DIN EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005
DIN EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
DIN 54518:2004 Testing of paper and board - Compression strength, short span test
DIN 65560:1991 Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength
DIN EN ISO 3037:2023-03 Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022); German version EN ISO 3037:2022
DIN EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components
DIN EN 13791:2020-02 Assessment of in-situ compressive strength in structures and precast concrete components; German version EN 13791:2019 / Note: To be amended by DIN EN 13791/A20 (2021-09).
DIN 55440-1:2019 Packaging test - Determination of compression resistance - Part 1: Test with constant conveyance speed
DIN 55440-1:2019-10 Packaging test - Determination of compression resistance - Part 1: Test with constant conveyance speed

Danish Standards Foundation, unit of compressive strength

DS/EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
DS/EN 772-1:2011 Methods of test for masonry units - Part 1: Determination of compressive strength
DS/EN 12808-3:2008 Grouts for tiles - Part 3: Determination of flexural and compressive strength
DS/EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
DS/EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
DS/EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance
DS/EN 1015-11/A1:2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS/EN 1015-11:2002 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
DS/EN 1351:1998 Determination of flexural strength of autoclaved aerated concrete
DS/EN 23035:1994 Single-faced and single-wall corrugated fibreboard-Determination of flat crush resistance
DS/EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
DS/EN 772-6:2001 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units
DS/EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
DS/EN 1354:2006 Determination of compressive strength of lightweight aggregate concrete with open structure
DS/EN 1052-1:1999 Method of test for masonry - Part 1: Determination of compressive strength
DS/EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
DS/EN 12390-3+AC:2013 Testing hardened concrete - Part 3: Compressive strength of test specimens
DS/EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components

Lithuanian Standards Office , unit of compressive strength

LST EN 1926-2007 Natural stone test methods - Determination of uniaxial compressive strength
LST EN 772-1-2011 Methods of test for masonry units - Part 1: Determination of compressive strength
LST EN 12808-3-2009 Grouts for tiles - Part 3: Determination of flexural and compressive strength
LST EN 679-2005 Determination of the compressive strength of autoclaved aerated concrete
LST EN 13892-2-2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
LST 1551.1-1999/1K-2002 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
LST 1551.1-1999 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
LST EN 1015-11-2002 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1015-11-2002/A1-2007 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
LST EN 1351-2000 Determination of flexural strength of autoclaved aerated concrete
LST EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
LST EN 772-6-2003 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units
LST EN 594-2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
LST EN 1354-2005 Determination of compressive strength of lightweight aggregate concrete with open structure
LST EN 1052-1-2000 Methods of test for masonry - Part 1: Determination of compressive strength
LST EN 14617-15-2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
LST EN 12390-3-2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
LST EN 12390-3-2009/AC-2011 Testing hardened concrete - Part 3: Compressive strength of test specimens
LST EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
LST EN 13791-2007 Assessment of in-situ compressive strength in structures and precast concrete components

未注明发布机构, unit of compressive strength

BS EN 1926:2006(2007) Natural stone test methods — Determination of uniaxial compressive strength
DIN EN 772-1:2000 Test method for bricks Part 1: Determination of compressive strength
DIN EN 1354:1997 Determination of compressive strength of lightweight aggregate concrete with open structure
NF P12-101-1 Test methods for masonry blocks. Part 1: Determination of compressive strength.

Association Francaise de Normalisation, unit of compressive strength

NF EN 1926:2007 Méthodes d'essai des pierres naturelles - Détermination de la résistance en compression uniaxiale
NF P12-101-1*NF EN 772-1+A1:2015 Methods of test for masonry units - Part 1 : determination of compressive strength
NF P12-101-1/IN1*NF EN 772-1/IN1:2015 Methods of test for masonry units - Part 1 : determination of compressive strength
NF P94-423:2002 Roches - Détermination de la résistance à la compression triaxiale
NF ISO 12192:2011 Papier et carton - Détermination de la résistance à la compression - Méthode d'écrasement en anneau
NF EN 679:2005 Détermination de la résistance à la compression du béton cellulaire autoclavé
NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
NF ISO 22685:2022 Produits réfractaires - Détermination de la résistance à la compression à température élevée
NF P19-104:1994 Determination of the compressive strength of autoclaved aerated concrete.
NF P19-104*NF EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
NF EN ISO 2739:2012 Bagues en métal fritté - Détermination de la résistance à l'écrasement radial
NF A95-325*NF EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength.
NF EN 1351:1997 Détermination de la résistance à la traction par flexion du béton cellulaire autoclavé
NF P61-611-3*NF EN 12808-3:2009 Grouts for tiles - Part 3 : determination of flexural and compressive strength
NF ISO 4602:2011 Renforts - Tissus - Détermination du compte de fils de chaîne et de duites par unité de longueur
NF EN 772-1+A1:2015 Méthodes d'essai des éléments de maçonnerie - Partie 1 : détermination de la résistance à la compression
NF EN ISO 11432:2021 Mastics pour bâtiments et ouvrages de génie civil - Détermination de la résistance à la compression
NF EN 1052-1:1999 Méthodes d'essai de la maçonnerie - Partie 1 : détermination de la résistance à la compression.
NF EN 772-1/IN1:2015 Méthodes d'essai des éléments de maçonnerie - Partie 1 : détermination de la résistance à la compression
NF X45-310:2000 Filter cartridges - Test methods - Verification of the crushing or bursting strength.
NF P19-118*NF EN 1354:2006 Determination of compressive strength of lightweight aggregate concrete with open structure
NF EN 1354:2006 Détermination de la résistance à la compression du béton de granulats légers à structure ouverte
NF EN ISO 3037:2022 Carton ondulé - Détermination de la résistance à la compression sur chant (méthode sans enduction de cire)
NF B10-614*NF EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
NF P12-101-1:2011 Methods of test for masonry units - Part 1 : determination of compressive strength.
NF B10-602-15:2005 Agglomerated stone - Test methods - Part 15 : determination of compressive strength.
NF T48-103:1994 Asbestos and rubber compressed sheets for seals. Determination of tensile strength.
NF P18-410*NF EN 13791:2019 Assessment of in-situ compressive strength in structures and precast concrete components
XP ISO 11093-9:1995 Papier et carton - Essais des mandrins - Partie 9 : détermination de la résistance à l'écrasement à plat.
NF EN 13791:2019 Évaluation de la résistance à la compression sur site des structures et des éléments préfabriqués en béton

IN-BIS, unit of compressive strength

PK-PSQCA, unit of compressive strength

PS 151-1961 Method for Determination of Tensile strength and elongation of single yarns.

GOSTR, unit of compressive strength

GOST R 58527-2019 Wall materials. Methods for determination of ultimate compressive and bending strength

American Society for Testing and Materials (ASTM), unit of compressive strength

ASTM C918-02 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM D3880-90(1999) Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004)e1 Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004) Standard Test Method for Asbestos Strength Units
ASTM D3880/D3880M-90(2017) Standard Test Method for Asbestos Strength Units
ASTM C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C1424-15 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units
ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D3313-99 Standard Test Method for Carbon Black-Individual Pellet Hardness
ASTM D4786-00(2005) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4786-00(2010) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D3313-12e1 Standard Test Method for Carbon Black&x2014;Individual Pellet Hardness
ASTM C695-91(2005) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C918/C918M-13 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918-97e1 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C918/C918M-20 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM C1006-84(2001) Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006-84(1996)e1 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-19 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-20 Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1006/C1006M-20a Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1194-02 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1314-14 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-14a Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M-15a Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1314-18 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-03b Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170-90(1999) Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1194-03 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1314-07 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-03a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-01 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-00a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-02a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-02 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-09 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1194-91 Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1314-21 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C695-15(2020) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C1314-22 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM E447-74 Standard Test Methods for Compressive Strength Of Masonry Prisms
ASTM C1314-12 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-17 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170-17(2017) Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1314-23 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-22a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1194-03(2011) Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C170/C170M-15 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1314-09 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-23a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-11a Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C170/C170M-15b Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M-16 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C695-15 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C918/C918M-07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C773-88(2006) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM D4555-10 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
ASTM D2166-06 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM F1574-03a Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-95 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM F1574-03 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM C695-91(2010) Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM D2166/D2166M-13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM F1574-03a(2017) Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
ASTM D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D2166-00 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D2166-00e1 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D8454/D8454M-22 Standard Test Method for Open-Hole Compressive Strength of Sandwich Constructions
ASTM C170/C170M-14 Standard Test Method for Compressive Strength of Dimension Stone
ASTM D5102-96 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
ASTM C1273-05 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1366-97 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM C1366-04(2009) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM C1273-05(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1314-10 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314-11 Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C495-07 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
ASTM D6484/D6484M-04e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6484/D6484M-99e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6484/D6484M-20 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM C1424-10(2015) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C1358-05 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
ASTM C39/C39M-10 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-09a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D6484/D6484M-14 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM D3759/D3759M-05 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM C39/C39M-11 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-18 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-14 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-15a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-16 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D5102-04 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
ASTM C1358-11 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
ASTM C1358-13 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
ASTM D5102/D5102M-22 Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
ASTM C1358-96(2000) Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
ASTM C1358-18 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures

RO-ASRO, unit of compressive strength

STAS 1245/4-1974 PLYWOOD Determination of compression strength
STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength

ES-AENOR, unit of compressive strength

RU-GOST R, unit of compressive strength

GOST R 57290-2016 Masonry. Method of determination of compressive strength
GOST R 57338-2016 Mortars for masonry. Method of determination of flexural and compressive strength
GOST R 57349-2016 Bricks and blocks. Compressive strength determination method
GOST R 57360-2016 Construction of concrete prefabricated. Determination of strength of concrete in compression
GOST 22756-1977 Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 23409.7-1978 Moulding sands, moulding and core sand mixtures. Methods for determination of compressive, tensile, bending and shearing strength
GOST 28686-1990 Corrugating paper. Method for determination of corrugating resistance to edge compression
GOST 24332-1988 Silica bricks and stones. Ultrasonic method of compressive strength determination

YU-JUS, unit of compressive strength

JUS B.B8.012-1987 Natural stone. Testing of compressive slrength
JUS U.M1.021-1997 Concrete - Classification by compressive strength

SE-SIS, unit of compressive strength

SIS SEN 04 05 15
SIS SS 13 73 07-1982 Autoclaved aerated concrete - Determination of compressive strength
SIS 11 22 52-1974 Sintered metal bushes. Determination of radial crushing strength
SIS SS 13 72 30-1983 Concrete testing - Hardened concrete - Compressive strength of est specimens

International Organization for Standardization (ISO), unit of compressive strength

ISO 3893:1977 Concrete; Classification by compressive strength
ISO 2474:1972 Ebonite; Determination of crushing strength
ISO 4700:1996 Iron ore pellets - Determination of crushing strength
ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
ISO 3035:1982 Single-faced and single-wall corrugated fibreboard; Determination of flat crush resistance
ISO 12192:2002 Paper and board - Compressive strength - Ring crush method
ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
ISO 2739:2006 Sintered metal bushes - Determination of radial crushing strength
ISO 2739:1973 Sintered metal bushes; Determination of radial crushing strength
ISO/DIS 7763:1964 Testing of paper and board — Compressive strength of an in s-shape fixed sample
ISO/TR 24857:2006 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
ISO 13821:2020 Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
ISO 3037:2022 Corrugated fibreboard — Determination of edgewise crush resistance (non-waxed edge method)
ISO 3037:1994 Corrugated fibreboard - Determination edgewise crush resistance (Unwaxed edge method)

TR-TSE, unit of compressive strength

TS 245-1965 METHOD OF DETERMINING THE TENSILE STRENGHT AND ELNGATION OF A SINGLE STRAND YARN
TS 2028-1975 DETERMINATION OF UNCONFINED COMPBESSIVE STRENGTH OF R0CKS
TS 2026-1975 DETERMINATION OF COMPRESSIVE STRENGTH OF IRON ORE PELLETS

NL-NEN, unit of compressive strength

NEN-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete
NEN 5988-1992 Concrete - Determination of compressive strength - Hardening test
NEN 5968-1988 Concrete and mortar- Determination of the compressive strength of test specimens
NEN 5989-1992 Concrete - Determination of compressive strength - Hardening test with temperature regulation

NO-SN, unit of compressive strength

NS-EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete

Japanese Industrial Standards Committee (JISC), unit of compressive strength

JIS P 8126:2015 Paper and board -- Determination of compressive strength -- Ring crush method
JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
JIS A 1108:1993 Method of test for compressive strength of concrete
JIS A 1108:1999 Method of test for compressive strength of concrete
JIS A 1108:2006 Method of test for compressive strength of concrete
JIS A 1108:2018 Method of test for compressive strength of concrete
JIS R 2206:1991 Testing method for cold crushing strength of refractory bricks
JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
JIS A 1136:1993 Method of test for compressive strength of spun concrete
JIS A 1182:1995 Method of test for compressive strength of polyester resin concrete
JIS A 1136:2018 Method of test for compressive strength of spun concrete
JIS Z 2507:2000 Sintered metal bearing -- Determination of radial crushing strength
JIS A 1107:2022 Method of sampling and testing for compressive strength of drilled cores of concrete
JIS Z 0403-2:1999 Corrugated fibreboard -- Part 2: Determination of edgewise crush resistance

VN-TCVN, unit of compressive strength

TCVN 6025-1995 Concrete.Classification by compressive strength
TCVN 3118-1993 Heavy weight concrete.Method for the determination of compressive strength
TCVN 3121-11-2003 Mortar for masonry.Test methods.Part 11: Determination of flexural and compressive strength of hardened mortars
TCVN 6355-2-2009 Bricks.Test methods.Part 2: Determination of compressive strength

PL-PKN, unit of compressive strength

PN H04061-1992 Iron ore pellets. Determination of crushing strength
PN C82055-01-1991 Test methods of pressed carbon products Determination of compressivestrength
PN D04217-1965 Lignofol and lignosfone Determination of shearing strength

SAE - SAE International, unit of compressive strength

SAE ARP4457-1992 Torsion Strength Testing of Hydraulic Tube Joints
SAE ARP4457-1998 Torsion Strength Testing of Hydraulic Tube Joints

Society of Automotive Engineers (SAE), unit of compressive strength

SAE ARP4457-2013 Torsion Strength Testing of Hydraulic Tube Joints

HU-MSZT, unit of compressive strength

MI 13822/17-1984

Professional Standard - Petroleum, unit of compressive strength

SY/T 5276-2000 Determination of flexural strength, compressive strength and gas permeability of chemical sand control artificial core

IX-SA, unit of compressive strength

AS 1141.51:1985

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, unit of compressive strength

GB/T 22874-2008 Single-faced and single-wall corrugated fibreboard.Determination of flat crush resistance
GB/T 3780.16-1983 Carbon black--Determination of individual pellet crush strength
GB/T 10424-2002 Sintered metal friction materials--Determination of compressive strength
GB/T 14201-2018 Iron ore pellets for blast furnace and direct reduction feedstocks.Determination of the crushing strength

CEN - European Committee for Standardization, unit of compressive strength

PREN 1015-11-2017 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
PREN 12390-3-2017 Testing hardened concrete - Part 3: Compressive strength of test specimens
PREN 13791-2018 Assessment of in-situ compressive strength in structures and precast concrete components

CZ-CSN, unit of compressive strength

CSN 44 1825-1981 Iron ore pellets. Method of determination of crushing strength
CSN 42 0891 Cast.10-1986 Testing of sintered products. Determination of radial crushing strength
CSN 72 1025-1992 Laboratory determination of unconfined compressive strenght of cohesive soils

KR-KS, unit of compressive strength

KS F 2732-2018(2023) Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2730-2008(2023) Testing method for rebound number to conclude compressive strength of concrete
KS F 2733-2018(2023) Standard test method for penetration resistance to conclude compressive strength of concrete
KS M ISO 13821-2020 Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
KS F 2731-2008(2023) Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS F 2328-2023 Test method for compressive strength of molded soil cement cylinders
KS M ISO 7263-2014 Corrugating medium — Determination of the flat crush resistance after laboratory fluting

ES-UNE, unit of compressive strength

UNE-EN 1015-11:2020 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
UNE-EN 772-1:2011+A1:2016 Methods of test for masonry units - Part 1: Determination of compressive strength
UNE-EN ISO 3037:2023 Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
UNE-EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components

BE-NBN, unit of compressive strength

NBN EN 679-1994 Determination of the compressive strength of autoclaved aerated concrete

The American Road & Transportation Builders Association, unit of compressive strength

AASHTO T 276-2010 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
AASHTO T 276-2015 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
AASHTO T 132-1987 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars
AASHTO T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
AASHTO T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
AASHTO T 208-2010 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil
AASHTO T 208-2015 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil
AASHTO T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
AASHTO T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
AASHTO T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens

AASHTO - American Association of State Highway and Transportation Officials, unit of compressive strength

T 276-2010 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2017 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2015 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 276-2009 Standard Method of Test for Measuring Early-Age Compression Strength and Projecting Later-Age Strength
T 167-2005 Standard Method of Test for Compressive Strength of Hot-Mix Asphalt
T167-1994 Standard Method of Test for Compressive Strength of Bituminous Mixtures
T 208-2010 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil
T 208-2005 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil
T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens

Professional Standard - Forestry, unit of compressive strength

LY/T 1411-1999 Laminated wood plastics.Compreg Determination of compression Strength parallel to face grain

US-FCR, unit of compressive strength

FCR COE CRD-C 643-01-2001 STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF MASONRY PRISMS

American National Standards Institute （ANSI), unit of compressive strength

ANSI/ASTM C695:2015 Standard Test Method for Compressive Strength of Carbon and Graphite

TH-TISI, unit of compressive strength

TIS 409-1982 Standard test method for compressive strength of concrete specimens

Professional Standard - Building Materials, unit of compressive strength

JC/T 2285-2014 Test method for isostatic compression strength (microspheres-gas compression) for hollow glass microspheres

PT-IPQ, unit of compressive strength

NP EN 1052-1-2000 Methods of test for masonry Part 1:Determination of compressive strength

Professional Standard - Geology, unit of compressive strength

DZ/T 0276.18-2015 Regulation for testing the physical and mechanical properties of rock.Part 18:Test for determing the uniaxial compressive strength of rock

ZA-SANS, unit of compressive strength

SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test

Professional Standard - Chemical Industry, unit of compressive strength

HG/T 2224-1991 Determination of granular average compressive strength of granular double superphosphate

IT-UNI, unit of compressive strength

EC 1-2021 UNI EN 13791-2021 Assessment of in-situ compressive strength in structures and precast concrete components