ZH
RU
ES

Jiangbei Plastic Products

Jiangbei Plastic Products, Total:491 items.

In the international standard classification, Jiangbei Plastic Products involves: Aircraft and space vehicles in general, Conducting materials, Plastics, Wastes, Analytical chemistry, Rubber and plastics products, Graphical symbols, Hand-held tools, Pipeline components and pipelines, Metrology and measurement in general, Environmental protection, Equipment for the rubber and plastics industries, Protection against dangerous goods, Chipless working equipment, Packaging materials and accessories, Materials and articles in contact with foodstuffs, Rubber, Packaging and distribution of goods in general, Cellular materials, Reinforced plastics, Company organization and management, Vocabularies, Fasteners, Spices and condiments. Food additives, Surface treatment and coating, Microbiology, Kitchen equipment, Agricultural machines, implements and equipment, Law. Administration, Tobacco, tobacco products and related equipment, Protection against fire, Raw materials for rubber and plastics, Construction materials, Quality, Welding, brazing and soldering, Paints and varnishes, Cutting tools, Equipment for the chemical industry, Mechanical testing, Products of the textile industry, Electrical engineering in general, Applications of information technology, Inks. Printing inks, Paint ingredients, Pharmaceutics, Shipbuilding and marine structures in general, Bottles. Pots. Jars, Laboratory medicine, Medical equipment, Materials for the reinforcement of composites, Wood, sawlogs and sawn timber, Materials for aerospace construction, Telecommunication systems.


U.S. Military Regulations and Norms, Jiangbei Plastic Products

Association Francaise de Normalisation, Jiangbei Plastic Products

  • NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
  • XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
  • NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
  • NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
  • NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
  • NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
  • NF EN ISO 11469:2016 Plastiques - Identification générique et marquage des produits en matière plastique
  • NF T51-067:1983 Plastics. Optical properties.
  • NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
  • NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
  • NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
  • NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
  • NF T54-504:1976 Light plastics products. Bending test.
  • NF T51-025:1999 Plastics. Determination of migration of plasticizers.
  • NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
  • NF T58-001:1997 Plastics. Preparation of test specimens by machining.
  • NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
  • NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
  • NF T51-005-2:1996 Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite.
  • NF T51-113:1976 Plastics. Determination of the resistance to scratching.
  • NF T51-115:1982 Plastics. Determination of resistance to abrasion.
  • NF T56-200:1988 Plastics. Rigid cellular materials in the form of sheets. Specification plan.
  • NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
  • NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
  • NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
  • NF T51-034-2:1996 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
  • NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
  • NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
  • NF T54-111:1971 Transparent sheets of polyethylene. Determination of the haze.
  • NF T51-165:1980 Plastics. Methods exposure to natural weathering.
  • NF EN ISO 2818:2019 Plastiques - Préparation des éprouvettes par usinage
  • XP D25-201-17*XP CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17 : determination of carbonyl chloride in plastics
  • NF T52-113:1985 Plastics. Basic materials for polyurethanes. Polyesters. Determination of the hydroxyl value.
  • NF T58-100:1971 Plastics materials. Surface coating of metals. Plastics coatings.(dry application). Specification.
  • NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
  • XP CEN/TS 13130-17:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 17 : détermination du chlorure de carbonyle dans les matières plastiques
  • NF T51-402*NF EN ISO 7808:1998 Plastics. Thermosetting moulding materials. Determination of transfer flow.
  • NF T53-501*NF EN ISO 3671:1998 Plastics. Aminoplastic moulding materials. Determination of volatile matter.
  • NF T56-201:1988 Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.
  • NF T51-150*NF EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
  • NF T51-180:1986 Plastics. Cyclical exposure. Definition of terms.
  • NF T51-022:1997 Plastics. Evaluation of the action of microorganisms.
  • NF T54-503:1976 Light plastics products. Determination of tensile properties.
  • NF T54-505:1976 Light plastics products. Impact resistance test.
  • NF T54-072:1981 Polyethylene pipes "5". Specifications.
  • NF T51-055:1980 Plastics. Method of exposure under glass to daylight.
  • NF T51-068:1983 Plastics. Determination of transparency of a testpiece.
  • XP D25-201-20*XP CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20 : determination of epichlorohydrin in plastics
  • NF EN 13130-4:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 4 : détermination du 1,3-butadiène dans les matières plastiques
  • NF EN 13130-8:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 8 : détermination des isocyanates dans les matières plastiques
  • NF T51-351:1985 Plastics. Determination of ash. Unplasticized cellulose acetate.
  • NF T54-192:2003 Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.
  • NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
  • NF T56-203:1988 Plastics. Rigid cellular materials in the form of polyurethane sheets. Specifications.
  • NF T52-131:1988 Plastics. Basic materials for polyurethane. Determination of the density of isocyanates.
  • NF EN 13130-6:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 6 : détermination du chlorure de vinylidène dans les matières plastiques
  • NF T52-114:1985 Plastics. Basic materials for polyrethanes. Determination of the acid index of polyethers.
  • NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
  • NF T52-116:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determination of non saturation level.
  • NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
  • NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
  • NF T51-624*NF ISO 9113:1987 Plastics. Polypropylene (pp) and propylene-copolymer thermoplastics. Determination of isotactic index.
  • NF T51-433*NF EN ISO 8975:1995 Plastics. Phenolic resins. Determination of ph.
  • NF T51-527:1985 Plastics. Epoxies. Determination of properties.
  • NF T51-111:1997 Plastics. Determination of tensile-impact strength.
  • NF T54-104:1970 Plastics. Sheets. Estimate of flexibility. Suspended loop method.
  • NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
  • NF T51-081:1981 Plastics : . Evaluation of the tendency to dust collection.
  • NF T50-050-3:1999 Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.
  • NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
  • NF T51-401:1981 Plastics. Thermosetting moulding materials. Determination of shrinkage and post-shrinkage.
  • NF T30-708:1983 Paints. Thick plastics coatings. Preparation of test pieces. Application of products.
  • NF T51-008*NF EN ISO 172:1998 Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.
  • NF T54-033:1980 Plastics. Unplasticized PVC fittings. Determination of water absorption.
  • NF T57-519*NF EN 1842:1997 Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage.
  • XP D25-201-22*XP CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22 : determination of ethylene oxide and propylene oxide in plastics
  • NF D25-201-8*NF EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8 : determination of isocyanates in plastics
  • NF T51-075:1986 Plastics. Fire behaviour. Needle burner test.
  • NF T51-057:1969 Plastics. Method of exposure to light from the enclosed carbon arc.
  • NF T51-058:1969 Plastics. Estimate of colour fastness by exposure to light.
  • NF T51-070:1974 Plastics. Determination of heat deformation. Martens test.
  • XP CEN/TS 13130-22:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 22 : détermination des oxydes d'éthylène et de propylène dans les matières plastiques
  • NF D25-201-6*NF EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6 : determination of vinylidene chloride in plastics.
  • NF D25-201-4*NF EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4 : determination of 1,3-butadiene in plastics
  • NF T47-265:1993 PLASTICS PRODUCTS. HOSE OF POLYMER REINFORCED THERMOPLASTICS FOR SUCTION AND SICHARGE. (EUROPEAN STANDARD EN 23994).
  • NF T53-003-1:1999 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Part 1 : designation system and basis for specifications.
  • NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
  • NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
  • NF T51-063:1971 Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics.
  • NF EN ISO 15252-2:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
  • NF EN ISO 14526-2:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
  • NF T51-911:2001 Plastics - Determination of Izod impact strength.
  • NF T51-440*NF EN ISO 10082:2000 Plastics - Phenolic resins - Classification and test methods.
  • NF T51-024-1*NF EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1 : ball indentation method
  • NF T51-014:1997 Plastics. Standard atmospheres for conditioning and testing.
  • NF T54-108:1971 Plastics. Thin sheets. Determination of resistance to tear propagation.
  • NF T51-122:1988 Plastics. Determination of tensile properties by use of small specimens.
  • NF T51-017:1979 Plastics. Test of impact resistance (clamped test specimen).
  • NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
  • NF S99-512:1997 Plastics. Phenolic resins. Definitions and test methods.
  • NF T53-002-1:1999 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Part 1 : designation system and basis for specifications.
  • NF T51-005-3:1996 Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.
  • NF T54-023:1980 Plastics. Un-plasticized PVC pipes. Determination of conventionnal water absorption.
  • NF T53-030-2:1999 Plastics. Polystyrene (PS) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
  • NF T52-132:1988 Plastics. Basic materials for polyurethane. Pure isocyanates. Determination of isocyanates functions.
  • NF T56-114:1985 Plastics. Flexible cellular plastics. Dynamic fatigue test through repeated compressions at fixed deformation.
  • FD T50-101*FD CEN/TR 15351:2007 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
  • NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
  • NF EN 14481:2003 Matériaux et articles en contact avec les denrées alimentaires - Plastiques - Méthodes d'essai pour la détermination d'un contact gras
  • NF T56-119*NF EN ISO 1923:1995 Cellular plastics and rubbers. Determination of linear dimensions.
  • NF T51-024-2*NF EN ISO 2039-2:1999 Plastics. Determination of hardness. Part 2 : Rockwell hardness.
  • NF T51-045-4*NF EN ISO 3451-4:2000 Plastics - Determination of ash - Part 4 : polyamides
  • NF T51-172:1997 Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method.
  • NF T58-110:1971 Plastics materials. Surface coating of metals. Plastics coatings. Methods of thickness determination.
  • NF T54-106:1980 Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.
  • NF T50-007-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
  • NF T50-002-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
  • NF T50-006-2:1997 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
  • NF T54-018:1996 Plastics. Unplasticized polyvinyl chloride pipes for underground communication lines. Specifications.

RO-ASRO, Jiangbei Plastic Products

  • STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
  • STAS 4627-1975 PLASTICS EARMARKS FOR ANIMALS
  • STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
  • STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
  • STAS 5870-1973 Plaslics SIEVE ANALYSIS
  • STAS 6127-1987 PLASTICS Tear strength determinatiQn of plastic flexible sheets
  • STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
  • STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
  • STAS 5873-1983 PLASTIC S Determination of compression characteristics
  • STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing
  • STAS 6572-1968
  • STAS 7136-1984 Plasties PHORMO-PHENOLIC MOULDING MINTURES
  • STAS 5872-1976 PLASTIC S Determination of temperatura of deflection under load
  • STAS 5796-1980 PLASTICS Bulk factor calcul of moulding mixtures
  • STAS 6339-1980 PLASTICS Determination of resistance at chemical agents action
  • STAS 6175-1980 PLASTICS Determination of Dynstat impact resistance
  • STAS 5795-1973 Plastics DETERMINATION OF SHRINKAGE OF GOMPRESSION MOULDED TEST SPEGIMENS OF HEATCON- VERTIBLE MATERIALS
  • STAS 6896-1973 PLASTICS FOR BUILDING PURPO- SES Polyvinyl chloride handrail shape
  • STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
  • STAS 6174-1973 PLASTrfiS Determination of therrao-stability by Martens method
  • STAS 7200-1973 PLASTICS Dotermination of thicknc;,s of films and sheets
  • STAS 5691-1980 PLASTICS Determinalion of water absorption at boiling
  • STAS 6128-1983 PLASTICS Determination of aqueous extract of 6 polyarnide
  • STAS 5799-1986 PLASTICS Detection and determination of free ammonia of phenol-formaldehyde mouldings

Danish Standards Foundation, Jiangbei Plastic Products

  • DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • DS/EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
  • DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i
  • DS/CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
  • DS/EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
  • DS/EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
  • DS/CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
  • DS/EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
  • DS/EN ISO 172:1999 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia
  • DS/EN 13130-1:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
  • DS/CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
  • DS/CEN/TR 15351:2007 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
  • DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
  • DS/EN ISO 119:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodemetric method

European Committee for Standardization (CEN), Jiangbei Plastic Products

  • PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
  • prEN 23994-1992 Plastic products; hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
  • EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
  • DD ENV 13130-8-1999 Materials and Articles in Contact with Foodstuffs - Plastics Substances Subject to Limitation - Part 8: Determination of Isocyanates in Plastics
  • EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
  • PD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
  • EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

AENOR, Jiangbei Plastic Products

  • UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
  • UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
  • UNE-CEN/TS 13130-17:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
  • UNE-EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
  • UNE-EN 13130-8:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
  • UNE-EN 13130-4:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
  • UNE-EN 13130-6:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
  • UNE-CEN/TS 13130-20:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
  • UNE-EN 13130-1:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
  • UNE-CEN/TS 13130-22:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
  • UNE 41107:1961 PREFABRICATED PRODUCTS, SLASTICS AND OF LOW TRANSVERSAL DILATATION FOR THE FILLING OF EXPANSION JOINTS IN CONCRETE PAVINGS
  • UNE-CEN/TR 15351:2008 IN Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
  • UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
  • UNE-EN ISO 172:1999 PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETECTION OF FREE AMMONIA (ISO 172:1978)

German Institute for Standardization, Jiangbei Plastic Products

  • DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
  • DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
  • DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
  • DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
  • DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
  • DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
  • DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
  • DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
  • DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
  • DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
  • DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
  • DIN CEN/TS 13130-17:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
  • DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
  • DIN EN 13130-4:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics; German version EN 13130-4:2004
  • DIN EN 13130-8:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics; German version EN 13130-8:2004
  • DIN EN 14233:2003-01 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature ...
  • DIN EN 13130-6:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics; German version EN 13130-6:2004
  • DIN CEN/TS 13130-20:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
  • DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
  • DIN 53499:1974 Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials
  • DIN EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
  • DIN EN 13130-1:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plas...
  • DIN CEN/TS 13130-22:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
  • DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
  • DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
  • DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
  • DIN EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics; German version EN 13130-8:2004
  • DIN 53421:1984 Testing of rigid cellular plastics; compression test
  • DIN EN ISO 172:1998-10 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998
  • DIN EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics; German version EN 13130-4:2004
  • DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
  • DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
  • DIN EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics; German version EN 13130-6:2004
  • DIN EN ISO 15252-2:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999
  • DIN EN ISO 14526-2:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999

Group Standards of the People's Republic of China, Jiangbei Plastic Products

  • T/CAS 265-2017 Rotomolding product—Plastics inspection chamber
  • T/JYPA 002-2021 Plastic griddles
  • T/STSJSH 0001-2017 Daily plastic products
  • T/QGCML 863-2023 Plastic waste cutting table
  • T/CPPIA 17-2022 Antibacterial daily plastic products
  • T/QGCML 878-2023 Plastic product processing device
  • T/CXSBX 003-2023 Technical Specification for Labeling of Plastic Products Used in Food Contact: Disposable Plastic Tableware
  • T/GDPIA 36-2021 Guide for the selection of life source plastic products
  • T/BAEE 013-2022 Specifications for the use of plastics in markets
  • T/CASME 857-2023 Technical requirements for production of hard plastic products
  • T/SDAQI 067-2021 Evaluation of environment-friendly product—Ecologically degradable plastic
  • T/CXSBX 002-2023 General principles for declaration of conformity of plastic products for food contact
  • T/BAEE 011-2022 Specification for the mark of degradable plastic products
  • T/CASTENG 014-2023 Specification for carbon emission accounting of plastic product enterprises
  • T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
  • T/AQSPMK 0009-2023 Colorants for plastic products manufacturing industry — Evaluation requirements for green factories
  • T/CNLIC 0086-2023 Colorants for plastic products manufacturing industry— Evaluation requirements for green factories
  • T/HZAS 3-2019 Quality control specification for online sales of products for plastic mobile phone cases
  • T/GDBZ 004-2020 Determination of migration of isophthalic acid in plastic materials and products used in food contact
  • T/SDAQI 048-2021 Technical specification for ecodegradable plastic resins and products
  • T/CRRA 0302-2020 General guidelines for the evaluation of plastics products' easy-to-collect & easy-to-regenerate design
  • T/GDES 56-2021 Assessment indicator system of cleaner production in plastics industry

PL-PKN, Jiangbei Plastic Products

International Organization for Standardization (ISO), Jiangbei Plastic Products

  • ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
  • ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
  • ISO 3994:1977 Plastics products; Hose of polymer reinforced thermoplastics for suction and discharge
  • ISO 2818:2018 Plastics — Preparation of test specimens by machining
  • ISO 10093:1994 Plastics - Fire tests - Standard ignition sources
  • ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
  • ISO/DIS 4484-2.2 Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
  • ISO 8986-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
  • ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
  • ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 15791-1:2002 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance
  • ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
  • ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
  • ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
  • ISO 11752:2000 Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts

Japanese Industrial Standards Committee (JISC), Jiangbei Plastic Products

  • JIS Z 7120:2003 Plastics -- Guideline for the application of Mobius loop to plastic products
  • JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
  • JIS A 5390:1993 Plastics spacers for precast concrete
  • JIS K 7171:2008 Plastics -- Determination of flexural properties
  • JIS K 7171:2016 Plastics -- Determination of flexural properties
  • JIS K 7171:1994 Plastics -- Determination of flexural properties
  • JIS K 7181:1994 Plastics -- Determination of compressive properties
  • JIS A 5390 AMD 1:2012 Plastics spacers for precast concrete (Amendment 1)
  • JIS K 7364-2:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 7191-2:1996 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
  • JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6899-2:1996 Plastics -- Symbols -- Part 2: Fillers and reinforcing materials
  • JIS K 7191-3:1996 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
  • JIS K 6922-2:2005 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6921-2:2005 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6922-2:2010 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6921-2:2010 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6922-2:2018 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS A 5742:2015 Products of wood-plastic recycled composite -- Assembled decks
  • JIS K 6927-1:1997 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation

Society of Automotive Engineers (SAE), Jiangbei Plastic Products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Jiangbei Plastic Products

  • GB/T 16288-2008 Marking of plastics products
  • GB/T 22236-2008 Testing of plastics.Size reduction of plastic products for test purposes
  • GB/T 5473-2016 Plastics.Phenol formaldehyde mouldings.Detection of free ammonia
  • GB/T 16288-1996 Marking for plastic packing products recycling
  • GB/T 24453-2009 Plastic products used in guestroom of hotel
  • GB/T 4617-2009 Plastics.Phenolic mouldings.Determination of acetone-soluble matter
  • GB 4806.7-2016 National Food Safety Standard Food Contact Plastic Materials and Products
  • GB/T 7130-2016 Plastics.Phenol-formaldehyde mouldings.Determination of free phenols.Iodometric method
  • GB/T 12783-2000 Editorial nominating method for the model designation of rubber and plastics machinery
  • GB/T 41792-2022 Plastics—Film and sheeting—Determination of cold-crack temperature
  • GB/T 5474-2016 Plastics.Phenol formaldehyde mouldings.Determination of free ammonia and ammonium compounds.Colorimetric comparison method

Professional Standard - Aviation, Jiangbei Plastic Products

  • HB/Z 5017-1976 Molding process of thermosetting plastic products
  • HB/Z 317-1998 Injection molding process of thermosetting plastic products
  • HB/Z 5017-1996 Molding process of thermosetting plastic products
  • HB 0-84-1984 Specifications for thermosetting plastic molded products

Shanghai Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

  • DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)
  • DB31/T 1394-2023 Evaluation Guidelines for Green Design of Plastic Products

TR-TSE, Jiangbei Plastic Products

  • TS 785-1969 PLASTICS DETERMINATION OF THE REFRACTIVE INDEX OF TRANSPARENT PLASTICS
  • TS 1065-1972 COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS
  • TS 1096-1972 TEST FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS
  • TS 1066-1972 STANDARD METHOD OF TEST FOR FLAMMABILITY OF ?ELF - SUPPORTING PLASTICS

Korean Agency for Technology and Standards (KATS), Jiangbei Plastic Products

  • KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products
  • KS M ISO 172-2002(2017) Plastics－Phenol-formaldehyde mouldings－Determination of free ammonia
  • KS M ISO 172:2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
  • KS M ISO 12992:2006 Plastics－Vertical flame spread determination for film and sheet
  • KS M 3042-2002(2012) General rules for method for determination of dimension of plastics parts
  • KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
  • KS M ISO 8986-2:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
  • KS M ISO 15791-1:2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
  • KS M ISO 4614-2010(2020) Plastics－Melamine-formaldehyde mouldings－Determination of extractable formaldehyde
  • KS M ISO 5659-1-2002(2012) Plastics－Somke generation－Part 1：Guidance on optical－density testing
  • KS M ISO 8986-1:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 1:Designation system and basis for specifications
  • KS M ISO 8986-1:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS

KR-KS, Jiangbei Plastic Products

  • KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products
  • KS M ISO 172-2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
  • KS M ISO 15791-1-2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

HU-MSZT, Jiangbei Plastic Products

国家市场监督管理总局、中国国家标准化管理委员会, Jiangbei Plastic Products

  • GB/T 37866-2019 Green product assessment—Plastic products
  • GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
  • GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
  • GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
  • GB/T 39935-2021 Plastics—Film and sheeting—Determination of blocking resistance

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Jiangbei Plastic Products

Military Standard of the People's Republic of China-General Armament Department, Jiangbei Plastic Products

United States Navy, Jiangbei Plastic Products

Professional Standard - Machinery, Jiangbei Plastic Products

  • JB/T 3820-2015 Plastics product hydraulic press.Testing of the accuracy
  • JB/T 3820-1984 Hydraulic press for plastic products Precision
  • JB/T 53032-1999 Product quality classification of plastic bag making machine
  • JB/T 53080-1999 Plastic Extrusion Turntable Shoemaking Machine Product Quality Grading

CZ-CSN, Jiangbei Plastic Products

  • CSN 64 0008-1968 Construction of Plastic Products (Instruc- ions)
  • CSN 64 0758-1979 Plastics. Determination of hydrogen cyanide in combustion products of plastics
  • CSN EN 23994-1995 Plastics products.Hose of polymer reinforced thermoplastics for suction and discharge(ISO 3994:1977)
  • CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics

Malaysia Standards, Jiangbei Plastic Products

Professional Standard - Environmental Protection, Jiangbei Plastic Products

  • HJBZ 12-1997 Degradable plastic packaging products
  • HJ/T 231-2006 Technical requirement for environmental labeling products Products made from recycled plastics
  • HJ 209-2017 Technical requirements for environmental labeling products Plastic packaging products

Professional Standard - Light Industry, Jiangbei Plastic Products

  • QB/T 6018-2020 Code for design of plastic products plant
  • QB/T 4881-2015 Safety technical specifications for reworked and recycled plastic products

CEN - European Committee for Standardization, Jiangbei Plastic Products

  • PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
  • EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
  • PD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
  • PD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics

British Standards Institution (BSI), Jiangbei Plastic Products

  • BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
  • BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
  • BS EN ISO 11469:2016 Tracked Changes. Plastics. Generic identification and marking of plastics products
  • DD ENV 13130-4-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in plastics
  • DD ENV 13130-6-1999 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in plastics
  • BS EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of 1,3-butadiene in plastics
  • BS EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of isocyanates in plastics
  • BS DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
  • BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • DD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of epichlorohydrin in plastics
  • BS EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of vinylidene chloride in plastics
  • BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
  • BS DD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of epichlorohydrin in plastics
  • BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • DD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of ethylene oxide and propylene oxide in plastics
  • BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN 422:1996 Rubber and plastics - Machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction
  • BS DD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of ethylene oxide and propylene oxide in plastics
  • BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
  • BS 7029-1:1993 Method of specifying thermoplastics injection mouldings - General requirements

ES-UNE, Jiangbei Plastic Products

  • UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
  • UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
  • UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

TH-TISI, Jiangbei Plastic Products

Underwriters Laboratories (UL), Jiangbei Plastic Products

Association of German Mechanical Engineers, Jiangbei Plastic Products

  • VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
  • VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
  • VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material
  • DVS 2201-1-1988
  • DVS 2240-1-2005 Therad inserts for the joining of mouldings made of plastics
  • DVS 2216-6-2002 Ultrasonic joining of mouldings and semi-finished products made of amorphous thermoplastics in series fabrication
  • DVS 2216-6-2013 Ultrasonic joining of mouldings and semi-finished products made of amorphous thermoplastics in series fabrication
  • DVS 2215-3-1999 Hot plate welding of mouldings made from amorphous thermoplastics in volume production
  • DVS 2201-1 Beiblatt 1-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Material and material short cuts
  • DVS 2218-3-2006 Welding of thermoplastics in series fabrication - Rotational friction welding of mouldings and semi-finished products made of polyamides (PAs)
  • DVS 2201-1 Beiblatt 1-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Material and abbreviation
  • VDI 3822 Blatt 2.1.9-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by microbial stress
  • DVS 2215-3 Beiblatt 1-1999 Hot plate welding of mouldings made from amorphous thermoplastics in volume production - Welding parameters for amorphous thermolastics and blends

Indonesia Standards, Jiangbei Plastic Products

American Society for Testing and Materials (ASTM), Jiangbei Plastic Products

  • ASTM D883-08 Standard Terminology Relating to Plastics
  • ASTM D883-12 Standard Terminology Relating to Plastics
  • ASTM D883-11 Standard Terminology Relating to Plastics
  • ASTM F619-03 Standard Practice for Extraction of Medical Plastics
  • ASTM D3918-96(2003) Standard Terminology Relating to Reinforced Plastic Pultruded Products
  • ASTM D5272-92(1999) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • ASTM D3918-96 Standard Terminology Relating to Reinforced Plastic Pultruded Products
  • ASTM D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products
  • ASTM F619-03(2008) Standard Practice for Extraction of Medical Plastics

Professional Standard - Commodity Inspection, Jiangbei Plastic Products

  • SN/T 2139-2008 Rules for the inspection of plastic products for import and export
  • SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method
  • SN/T 2250-2009 Determination of plasticizers in plastics and plastic articles.Gas Chromatography-mass spectrometry(GC-MS)method
  • SN/T 2941-2011 Determination of melamine content in plastic raw materials and products
  • SN/T 1877.2-2007 Determination of polycyclic aromatic hydrocarbons in plastic and plastic article

RU-GOST R, Jiangbei Plastic Products

  • GOST 24105-1980 Plastics products. Terms and definitions of defects
  • GOST 27358-1987 Press moulds for manufacturing of plastic articles. General specifications
  • GOST 4.489-1989 Product-quality index system. Press moulds for manufacturing of plastic articles. Index nomenclature
  • GOST 15948-1976 Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
  • GOST 22559-1977 Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions

Anhui Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

Taiwan Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

  • CNS 4662-1984 Open Insert Nuts for Plastics Mouldings
  • CNS 8544-1989 Plastic Food Receptacles with Lids on Table Use
  • CNS 4664-1984 Closed Insert Nuts with Dead Hole for Plastics Mouldings
  • CNS 4663-1984 Closed Insert Nuts with Disk for Plastics Mouldings
  • CNS 8545-1989 Method of Test for Plastic Food Receptacles with Lids for Table Use
  • CNS 5821-1980 Determination of Resistance of Plastics to Colour Change Upon Exposure to Light of the Enclosed Carbon Arc

Lithuanian Standards Office , Jiangbei Plastic Products

  • LST EN 14233-2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
  • LST EN 13130-4-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
  • LST EN 13130-8-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
  • LST EN 13130-6-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
  • LST EN 13130-1-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastic
  • LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
  • LST EN ISO 172:2000 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978)

Professional Standard - Agriculture, Jiangbei Plastic Products

  • GB 4806.7-2023 National Food Safety Standards Plastic Materials and Products for Food Contact
  • SN/T 2249-2023 Determination of 34 plasticizers in plastic raw materials and their products by gas chromatography-mass spectrometry

U.S. Air Force, Jiangbei Plastic Products

JSAE - Society of Automotive Engineers of Japan@ Inc., Jiangbei Plastic Products

  • JASO M801-1993 Generic identification and marking system of plastics products

Professional Standard - Automobile, Jiangbei Plastic Products

  • QC/T 15-1992 General test method for automotive plastic products

American National Standards Institute （ANSI), Jiangbei Plastic Products

AT-ON, Jiangbei Plastic Products

  • ONORM EN 23994-1993 Plastics products - Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
  • ONORM C 9410-2-1994 Rubber products - Dimensional tolerances - Moulded rubber (elastomeric) products

Professional Standard - Tobacco, Jiangbei Plastic Products

  • YC/T 235.5-2007 General tolerances- Part 5: Plastic piece made from plastic semi-manufactured goods

GM North America, Jiangbei Plastic Products

  • GM GM9140P-2004 Resistance to Cold Cracking of Leather and Plastic Rolled Goods

YU-JUS, Jiangbei Plastic Products

BE-NBN, Jiangbei Plastic Products

FI-SFS, Jiangbei Plastic Products

SAE - SAE International, Jiangbei Plastic Products

  • SAE J855-1987 Test Method of Stretch and Set of Textiles and Plastics@ Standard; (March 1987)
  • SAE J855-1985 Test Method of Stretch and Set of Textiles and Plastics
  • SAE AMS3624D-1995 PLASTIC MOLDINGS AND EXTRUSIONS@ CELLULOSE ACETATE BUTYRATE

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Jiangbei Plastic Products

  • GB/T 33986-2017 Information description of product for electronic commerce transaction—Plastic product in contact with foodstuff

国家质量监督检验检疫总局, Jiangbei Plastic Products

  • SN/T 4503-2016 Determination of 2-phenyl-2-propanol in plastics and plastic products by gas chromatography-mass spectrometry
  • SN/T 2822-2011 Determination of the interface temperature between plastic and food during the heating process of exported food contact materials, polymer materials, plastics and products in microwave ovens or traditional furnaces

Professional Standard-Ships, Jiangbei Plastic Products

  • CB/T 3825-1998 Material classification and code for rubber,plastic and their products

ZA-SANS, Jiangbei Plastic Products

  • SANS 5591:1975 Preparation of samples and extracts used in testing plastics for medical use

BELST, Jiangbei Plastic Products

  • STB 1015-97 Household and consumer products made of plastics. General specifications

Hainan Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

  • DB46/T 505-2020 General technical requirements for fully biodegradable plastic products

Fujian Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

  • DB35/T 2126-2023 Quality management guidelines for food contact plastic product manufacturers

Hebei Provincial Standard of the People's Republic of China, Jiangbei Plastic Products

  • DB13/T 1081.17-2009 Food packaging materials and plastic products - Part 17: Determination of carbonyl chloride content

  plastic products, Jiangbei special instrument, Jiangbei cod, Jiangbei Plastic Products, Jiangbei superhard material, Jiangbei Material Level Meter, Jiangbei glove box, Jiangbei high temperature furnace, Jiangbei Sulfamic Acid, Jiangbei Membrane Structure, Jiangbei hydrogen peroxide, Jiangbei High Purity Air, Jiangbei medicine box, Jiangbei Environmental Protection Coatings, Jiangbei Catering Wastewater, Jiangbei price, Jiangbei reverse osmosis, Jiangbei sports floor, Jiangbei Sulfamic Acid, Jiangbei snacks.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved