ZH
RU
ES

plastic products

plastic products, Total:478 items.

In the international standard classification, plastic products involves: Conducting materials, Plastics, Aircraft and space vehicles in general, Graphical symbols, Wastes, Rubber and plastics products, Equipment for the rubber and plastics industries, Metrology and measurement in general, Hand-held tools, Chipless working equipment, Environmental protection, Rubber, Pipeline components and pipelines, Vocabularies, Fasteners, Protection against dangerous goods, Microbiology, Protection against fire, Quality, Mechanical testing, Products of the textile industry, Electrical engineering in general, Surface treatment and coating, Pharmaceutics, Laboratory medicine, Cellular materials, Law. Administration, Reinforced plastics, Agricultural machines, implements and equipment, Analytical chemistry, Company organization and management, Raw materials for rubber and plastics, Materials for aerospace construction, Inks. Printing inks, Paint ingredients, Cutting tools, Materials for the reinforcement of composites, Test conditions and procedures in general, Shipbuilding and marine structures in general, Paints and varnishes, Applications of information technology, Installations in buildings, Air quality, Road engineering, Occupational safety. Industrial hygiene, Telecommunication systems, Fuels, Freight distribution of goods, Materials and articles in contact with foodstuffs, Leather technology, Measurement of volume, mass, density, viscosity, Protective equipment.


Association Francaise de Normalisation, plastic products

  • NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
  • NF T51-067:1983 Plastics. Optical properties.
  • NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
  • NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
  • NF EN ISO 11469:2016 Plastiques - Identification générique et marquage des produits en matière plastique
  • NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
  • NF T54-504:1976 Light plastics products. Bending test.
  • NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
  • NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
  • NF T51-005-2:1996 Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite.
  • NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
  • NF T51-025:1999 Plastics. Determination of migration of plasticizers.
  • NF T51-113:1976 Plastics. Determination of the resistance to scratching.
  • NF T51-115:1982 Plastics. Determination of resistance to abrasion.
  • NF T51-034-2:1996 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
  • NF T51-165:1980 Plastics. Methods exposure to natural weathering.
  • NF T58-001:1997 Plastics. Preparation of test specimens by machining.
  • NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
  • NF T51-150*NF EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
  • NF T51-180:1986 Plastics. Cyclical exposure. Definition of terms.
  • NF T51-022:1997 Plastics. Evaluation of the action of microorganisms.
  • NF T54-503:1976 Light plastics products. Determination of tensile properties.
  • NF T54-505:1976 Light plastics products. Impact resistance test.
  • NF T54-072:1981 Polyethylene pipes "5". Specifications.
  • NF T51-055:1980 Plastics. Method of exposure under glass to daylight.
  • NF T51-068:1983 Plastics. Determination of transparency of a testpiece.
  • NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
  • NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
  • NF T51-433*NF EN ISO 8975:1995 Plastics. Phenolic resins. Determination of ph.
  • NF T51-527:1985 Plastics. Epoxies. Determination of properties.
  • NF T51-111:1997 Plastics. Determination of tensile-impact strength.
  • NF T54-104:1970 Plastics. Sheets. Estimate of flexibility. Suspended loop method.
  • NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
  • NF T51-081:1981 Plastics : . Evaluation of the tendency to dust collection.
  • NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
  • NF T54-111:1971 Transparent sheets of polyethylene. Determination of the haze.
  • NF T51-075:1986 Plastics. Fire behaviour. Needle burner test.
  • NF T51-057:1969 Plastics. Method of exposure to light from the enclosed carbon arc.
  • NF T51-058:1969 Plastics. Estimate of colour fastness by exposure to light.
  • NF T51-070:1974 Plastics. Determination of heat deformation. Martens test.
  • NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
  • NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
  • NF T52-113:1985 Plastics. Basic materials for polyurethanes. Polyesters. Determination of the hydroxyl value.
  • NF T58-100:1971 Plastics materials. Surface coating of metals. Plastics coatings.(dry application). Specification.
  • NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
  • NF T51-911:2001 Plastics - Determination of Izod impact strength.
  • NF T51-440*NF EN ISO 10082:2000 Plastics - Phenolic resins - Classification and test methods.
  • NF T51-024-1*NF EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1 : ball indentation method
  • NF T51-014:1997 Plastics. Standard atmospheres for conditioning and testing.
  • NF T54-108:1971 Plastics. Thin sheets. Determination of resistance to tear propagation.
  • NF T51-122:1988 Plastics. Determination of tensile properties by use of small specimens.
  • NF T51-017:1979 Plastics. Test of impact resistance (clamped test specimen).
  • NF S99-512:1997 Plastics. Phenolic resins. Definitions and test methods.
  • NF T51-005-3:1996 Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.
  • NF T54-033:1980 Plastics. Unplasticized PVC fittings. Determination of water absorption.
  • NF T54-192:2003 Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.
  • NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
  • NF T52-131:1988 Plastics. Basic materials for polyurethane. Determination of the density of isocyanates.
  • NF T51-351:1985 Plastics. Determination of ash. Unplasticized cellulose acetate.
  • NF T56-200:1988 Plastics. Rigid cellular materials in the form of sheets. Specification plan.
  • NF T56-119*NF EN ISO 1923:1995 Cellular plastics and rubbers. Determination of linear dimensions.
  • NF T51-024-2*NF EN ISO 2039-2:1999 Plastics. Determination of hardness. Part 2 : Rockwell hardness.
  • NF T51-045-4*NF EN ISO 3451-4:2000 Plastics - Determination of ash - Part 4 : polyamides
  • NF T51-172:1997 Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method.
  • NF T58-110:1971 Plastics materials. Surface coating of metals. Plastics coatings. Methods of thickness determination.
  • NF T54-106:1980 Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.
  • NF T51-008*NF EN ISO 172:1998 Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.
  • NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
  • NF T51-402*NF EN ISO 7808:1998 Plastics. Thermosetting moulding materials. Determination of transfer flow.
  • NF T53-501*NF EN ISO 3671:1998 Plastics. Aminoplastic moulding materials. Determination of volatile matter.
  • NF T52-114:1985 Plastics. Basic materials for polyrethanes. Determination of the acid index of polyethers.
  • NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
  • NF T52-116:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determination of non saturation level.
  • NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
  • NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
  • NF T50-050-3:1999 Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.
  • NF T50-050-4*NF EN ISO 1043-4:2021 Plastics - Symbols and abbreviated terms - Part 4 : flame retardants
  • NF T50-050-4:1999 Plastics. Symbols and abbreviated terms. Part 4 : flame retardants.
  • NF T51-507-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles.
  • NF T51-507-1*NF EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles
  • NF T51-423*NF EN ISO 8989:1998 Plastics. Liquid phenolic resins. Determination of water miscibility.
  • NF T51-526*NF EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
  • NF T56-126*NF EN ISO 4651:1995 Cellular rubbers and plastics. Determination of dynamic cushioning performance.
  • NF T51-201*NF EN ISO 1675:1998 Plastics. Liquid resins. Determination of density by the pyknometer method.
  • NF T51-040:1997 Plastics. Determination of ash. Part 1 : general methods.
  • NF T54-701:1988 Plastics. Industrial laminated sheets based on thermosetting resins. Specification.
  • NF T51-006:1957 Plastics. Determination of methanol-soluble polystyrene.
  • NF T51-044:1970 Plastics. PVC resins. Determination of sulphated ash.
  • NF T54-107:1971 Plastics. Thin sheets. Determination of tear resistance (non perforated test piece).
  • NF T51-425:1983 Plastics. Liquid and solid phenolic resins. Measurement of density.
  • NF T51-199:1974 Plastics : statistical analysis of experimental results. Henry test.
  • NF T51-432:1984 Plastics. Phenolic resins. Determination of hmta content by perchloric acid method.
  • NF T54-023:1980 Plastics. Un-plasticized PVC pipes. Determination of conventionnal water absorption.
  • NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
  • NF T57-500*NF ISO 8604:1989 Plastics. Prepregs. Definitions of terms and symbols for designations.
  • NF T51-522*NF EN ISO 3001:1999 Plastics. Epoxy compounds. Determination of epoxy equivalent.
  • NF T25-008*NF ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
  • NF T54-085:1988 Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.
  • NF T51-426:1995 Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.
  • NF T56-107:1995 Cellular plastics and rubbers. Determination of apparent (bulk) density.
  • NF T51-034-1:1996 Plastics. Determination of tensile properties. Part 1 : general principles.
  • NF T51-049:1969 Plastics. Polyamide resins. Determination of melting point. So-called capillary tube method.
  • NF T51-050:1969 Plastics. Polyamide resins. Determination of melting point. Meniscus method.
  • NF T51-100:1971 Plastics. Vocabulary applicable to mechanical and thermomechanical tests and to their interpretation.
  • NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
  • NF T51-401:1981 Plastics. Thermosetting moulding materials. Determination of shrinkage and post-shrinkage.
  • NF T51-063:1971 Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics.
  • NF T54-078:1992 Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.
  • NF T47-265:1993 PLASTICS PRODUCTS. HOSE OF POLYMER REINFORCED THERMOPLASTICS FOR SUCTION AND SICHARGE. (EUROPEAN STANDARD EN 23994).
  • NF T56-203:1988 Plastics. Rigid cellular materials in the form of polyurethane sheets. Specifications.
  • NF T51-084-1*NF EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1 : general guidance
  • NF T56-114:1985 Plastics. Flexible cellular plastics. Dynamic fatigue test through repeated compressions at fixed deformation.
  • NF T51-103-1:2003 Plastics - Determination of creep behaviour - Part 1 : tensile creep.
  • NF T51-170-1*NF EN ISO 22088-1:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1 : general guidance
  • NF T51-078:1993 Plastics. Determination of the combustibility of specimens using a 125 mm flame source.
  • NF T51-507-1:1997 Plastics. Differential scanning calorimetry (DSC). Part 1 : general principles.
  • NF T50-005:1988 Plastics. Polyalkylene terephtalates. Part 1 : designation.
  • NF T54-109:1973 Plastics. Sheets. Impact resistance by the free falling dart method.
  • NF T51-540:1985 Plastics. Determination of ash. Polyalkylene terephthalates.
  • NF T51-223:1985 Plastics. Semi-cristalline materials. Determination of the conventional melting temperature by thermal analyse.
  • NF T57-519*NF EN 1842:1997 Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage.
  • NF T52-132:1988 Plastics. Basic materials for polyurethane. Pure isocyanates. Determination of isocyanates functions.
  • NF T51-195-1:2000 Plastics - Methods of exposure to laboratory light sources - Part 1 : general guidance.
  • NF T51-026*NF EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
  • NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
  • NF T51-117-2:1996 Plastics. Determination of dynamic mechanical properties. Part 2 : torsion-pendulum method.
  • NF T51-032:1976 Plastics. Determination of viscosity ratio of polyamide resins in concentrated solution.
  • NF T51-108:1984 Plastics. Friction and wear by sliding. Definitions of terms and general characteristics.
  • NF T51-435:1985 Plastics. Solid phenolic resins. Determination of melting range by the capillary tube method.
  • NF T51-731:1980 Plastics. Plasticized vinyl compounds. Determination of the volume resistivity at low voltage.
  • XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
  • NF T54-018:1996 Plastics. Unplasticized polyvinyl chloride pipes for underground communication lines. Specifications.
  • NF T56-201:1988 Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.
  • NF T51-003*NF EN ISO 60:1999 Plastics. Determination of apparent density of material that can be pourred from a specified funnel.
  • NF T50-050-2*NF EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials
  • NF T51-102*NF ISO 458-1:1986 Plastics. Determination of stiffness in torsion of flexible materials. Part 1 : general method.
  • NF T51-510-1*NF EN ISO 3672-1:2002 Plastics - Unsaturated-polyester resins (UP-R) - Part 1 : designation system
  • NF T51-052*NF ISO 1148:1988 Plastics. Aqueous dispersions of polymers and copolymers. Determination of ph.
  • NF T51-036:1986 Plastics. Polyamide homopolymers. Determination of matter extractable by boiling methanol.
  • NF T51-434:1997 Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method.
  • NF T51-042:1967 Plastics. PVC resins. Determination of compacted apparent bulk density.
  • NF T51-515:1979 Plastics. Unsaturated unpolymerized polyesters resins. Determination of volatile matter.
  • NF T54-048:1977 Plastics. Low density polyethylene pipes. Preparation of specimens for physical testing.
  • NF T57-505:1995 Plastics. Duroplastics based on unsaturated polyester, obtained by crosslinking. Determination of the active oxygyen content of an organic peroxyde (peerester type) for starting the base resin crosslinking.
  • NF T51-710:1986 Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.
  • NF T51-023*NF EN ISO 4614:1999 Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.
  • NF T51-436*NF EN ISO 8974:2002 Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.
  • NF T51-428*NF EN ISO 8987:2006 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
  • NF T51-043*NF EN ISO 1624:2003 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water
  • NF T51-071-3:1996 Plastics. Determination of burning behaviour by oxygen index. Part 3 : elevated-temperature test.
  • NF T51-046:1997 Plastics - Polyvinyl chloride resins. Determination of number of impurities and foreign particles.
  • NF T51-105:1971 Plastics. Cold bend temperature of flexible polyvinyl chloride compound.
  • NF T51-541:1982 Plastics. Poly(ethylene terephtalate) granules. Determination of water content.
  • NF T51-251:1984 Plastics. Aqueous dispersions of polymers and copolymers. Measurement of density.
  • NF EN 14987:2007 Plastiques - Évaluation de l'aptitude des plastiques à être éliminés dans des stations de traitement des eaux usées - Plan d'essai pour acceptation finale et spécifications
  • NF T51-294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.
  • NF T51-624*NF ISO 9113:1987 Plastics. Polypropylene (pp) and propylene-copolymer thermoplastics. Determination of isotactic index.
  • NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
  • NF T57-156*NF EN 12576:1998 Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.
  • NF T51-041*NF EN ISO 61:1999 Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel.
  • NF T57-154:1993 Glass-reinforced plastics. Preparation of plates with unidirectional reinforcements by bag moulding.
  • NF T54-090:1976 Plastics. Unplasticized and chlorinated PVC pipes. Colour of pipes and fittings.
  • NF T51-170-3*NF EN ISO 22088-3:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3 : bent strip method.
  • NF T56-129:2003 Rigid cellular plastics - Determination of volume percentage of open cells and closed cells.
  • NF T51-512*NF EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.
  • NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
  • NF T51-175*NF EN ISO 584:1998 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 degrees celsius (conventional method)
  • NF T56-129*NF EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
  • NF T51-702*NF EN ISO 9702:1998 Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content.
  • NF T51-027:1965 Plastics. Determination of vinyl in vinyl chloride acetate copolymers.
  • NF T51-560:1990 Plastics. Determination of the rheological characteristics in the molten state. Capillaru rheometer method.
  • NF T54-141:1984 Plastics. Film and sheeting. Determination of tear resistance. Part 2 : elmendorf method.
  • FD T50-101*FD CEN/TR 15351:2007 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
  • NF T53-003-1:1999 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Part 1 : designation system and basis for specifications.
  • NF T54-095:1985 Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.
  • NF T54-076:1992 Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.
  • NF T51-009*NF EN ISO 120:1998 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method.
  • NF T51-005-1:1996 Plastics. Determination of temperature of deflection under load. Part 1 : general test method.
  • NF T51-054:1968 Plastics. Aqueous dispersions of polymers and copolymers. Dry extract at 105 degrees C.
  • NF T54-110:1971 Plastics. Thin sheets. Determination of pliability limit temperature.(looped test piece impact test).
  • NF T51-525:1979 Plastics. Solid or liquid unpolymerized epoxy resins. Determination of volatile matter.
  • NF T51-222:1982 Plastics. Determination of deflection under load as a function of temperature.
  • NF T51-143:1974 Plastics. Filled polyamides. Determination of percentages of graphite or carbon black and fiber glass.
  • NF T53-030-2:1999 Plastics. Polystyrene (PS) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
  • NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
  • NF T52-136:1979 Plastics. Basic materials for polyurethanes. Toluylenediisocyanate. Determination of acidity.
  • NF T57-153-9*NF ISO 1268-9:2003 Fibre-reinforced plastics - Methods of producing test plates - Part 9 : moulding of GMT/STC
  • NF T57-153-6*NF ISO 1268-6:2003 Fibre-reinforced plastics - Methods of producing test plates - Part 6 : pultrusion moulding
  • NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
  • NF T50-004-1:1999 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Part 1 : designation and specification.
  • NF T50-006-1:1999 Plastics. Polyethylene (PE) moulding and extrusion materials. Part 1 : designation system and basis for specifications.
  • NF T50-006-1*NF EN ISO 17855-1:2014 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1 : designation system and basis for specifications
  • NF T50-002-1*NF EN ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1 : designation system and basis for specifications
  • NF T50-002-1:1995 Plastics. Polypropylene (pp) moulding and extrusion materials. Part 1 : designation system and basis for specifications.

RO-ASRO, plastic products

  • STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
  • STAS 4627-1975 PLASTICS EARMARKS FOR ANIMALS
  • STAS 5870-1973 Plaslics SIEVE ANALYSIS
  • STAS 6127-1987 PLASTICS Tear strength determinatiQn of plastic flexible sheets
  • STAS 5873-1983 PLASTIC S Determination of compression characteristics
  • STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing
  • STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
  • STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
  • STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
  • STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
  • STAS 7136-1984 Plasties PHORMO-PHENOLIC MOULDING MINTURES
  • STAS 5872-1976 PLASTIC S Determination of temperatura of deflection under load
  • STAS 5796-1980 PLASTICS Bulk factor calcul of moulding mixtures
  • STAS 6339-1980 PLASTICS Determination of resistance at chemical agents action
  • STAS 6175-1980 PLASTICS Determination of Dynstat impact resistance
  • STAS 5795-1973 Plastics DETERMINATION OF SHRINKAGE OF GOMPRESSION MOULDED TEST SPEGIMENS OF HEATCON- VERTIBLE MATERIALS
  • STAS 6896-1973 PLASTICS FOR BUILDING PURPO- SES Polyvinyl chloride handrail shape
  • STAS 6174-1973 PLASTrfiS Determination of therrao-stability by Martens method
  • STAS 7200-1973 PLASTICS Dotermination of thicknc;,s of films and sheets
  • STAS 5691-1980 PLASTICS Determinalion of water absorption at boiling
  • STAS 6128-1983 PLASTICS Determination of aqueous extract of 6 polyarnide
  • STAS 5799-1986 PLASTICS Detection and determination of free ammonia of phenol-formaldehyde mouldings
  • STAS 7015-1981 PLASTICS Determination of sheets and films inflamability in sloping position at 45c
  • STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
  • STAS 6912-1984 PLASTICS Petcrmination of crack strength by tcnsion of polyethylenes under tensio- active snbstances aetion
  • STAS 5875-1980 PLASTICS Determination of bulk density of moulding mixtures that can be poured from a funnel
  • STAS 6096-1973 PLASTICS Determination of melt flow index of poly- ethylene and polyethylene compounds

U.S. Military Regulations and Norms, plastic products

Japanese Industrial Standards Committee (JISC), plastic products

  • JIS Z 7120:2003 Plastics -- Guideline for the application of Mobius loop to plastic products
  • JIS K 7171:2008 Plastics -- Determination of flexural properties
  • JIS K 7171:2016 Plastics -- Determination of flexural properties
  • JIS K 7171:1994 Plastics -- Determination of flexural properties
  • JIS K 7181:1994 Plastics -- Determination of compressive properties
  • JIS K 6899-2:1996 Plastics -- Symbols -- Part 2: Fillers and reinforcing materials
  • JIS K 7350-1:1995 Plastics -- Methods of exposure to laboratory light sources Part 1: General guidance
  • JIS K 7227:1998 Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
  • JIS K 7226:1998 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
  • JIS K 7244-2:1998 Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
  • JIS K 6929-1:1996 Plastics -- Hardeners and accelerators for epoxide resins -- Part 1: Designation
  • JIS K 7350-3:1996 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
  • JIS K 7350-4:1996 Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
  • JIS K 7244-1:1998 Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
  • JIS K 7191-2:1996 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
  • JIS K 6927-1:1997 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation
  • JIS K 6828-2:2003 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
  • JIS K 7191-1:1996 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
  • JIS K 7242-2:1998 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
  • JIS K 7361-1:1997 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single beam instrument
  • JIS K 6921-2:1997 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

Group Standards of the People's Republic of China, plastic products

  • T/STSJSH 0001-2017 Daily plastic products
  • T/CPPIA 17-2022 Antibacterial daily plastic products
  • T/QGCML 878-2023 Plastic product processing device
  • T/QGCML 863-2023 Plastic waste cutting table
  • T/GDPIA 36-2021 Guide for the selection of life source plastic products
  • T/BAEE 013-2022 Specifications for the use of plastics in markets
  • T/CASME 857-2023 Technical requirements for production of hard plastic products
  • T/BAEE 011-2022 Specification for the mark of degradable plastic products
  • T/CASTENG 014-2023 Specification for carbon emission accounting of plastic product enterprises
  • T/SDAQI 067-2021 Evaluation of environment-friendly product—Ecologically degradable plastic
  • T/CXSBX 002-2023 General principles for declaration of conformity of plastic products for food contact
  • T/CRRA 0302-2020 General guidelines for the evaluation of plastics products' easy-to-collect & easy-to-regenerate design
  • T/GDES 56-2021 Assessment indicator system of cleaner production in plastics industry
  • T/AQSPMK 0009-2023 Colorants for plastic products manufacturing industry — Evaluation requirements for green factories
  • T/CNLIC 0086-2023 Colorants for plastic products manufacturing industry— Evaluation requirements for green factories
  • T/CRRA 0306-2022 Evaluation of design for plastic products’ easy-to-collect and easy-to-regenerate Insulation box for cold chain
  • T/GDPIA 1-2019 Test method for the ability to repel bacterial adhesion on the surface of plastic products
  • T/CXSBX 003-2023 Technical Specification for Labeling of Plastic Products Used in Food Contact: Disposable Plastic Tableware
  • T/CPPIA 20-2022 Assessment requirements for sustainable development（green and low carbon）factories—Plastic industry
  • T/JYPA 002-2021 Plastic griddles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic products

  • GB/T 16288-2008 Marking of plastics products
  • GB/T 24453-2009 Plastic products used in guestroom of hotel
  • GB/T 22236-2008 Testing of plastics.Size reduction of plastic products for test purposes
  • GB/T 41792-2022 Plastics—Film and sheeting—Determination of cold-crack temperature
  • GB/T 42923-2023 Determination of fiber length of glass fiber reinforced plastic products
  • GB/T 22040-2008 Technical requirements and determination of weathering quality for plastics of highway furnatures

HU-MSZT, plastic products

Professional Standard - Aviation, plastic products

  • HB/Z 5017-1976 Molding process of thermosetting plastic products
  • HB/Z 317-1998 Injection molding process of thermosetting plastic products
  • HB/Z 5017-1996 Molding process of thermosetting plastic products
  • HB 0-84-1984 Specifications for thermosetting plastic molded products

Shanghai Provincial Standard of the People's Republic of China, plastic products

  • DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)
  • DB31/T 1394-2023 Evaluation Guidelines for Green Design of Plastic Products

Danish Standards Foundation, plastic products

Korean Agency for Technology and Standards (KATS), plastic products

  • KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products
  • KS M 3042-2002(2012) General rules for method for determination of dimension of plastics parts
  • KS M ISO 12992:2006 Plastics－Vertical flame spread determination for film and sheet
  • KS M ISO 5659-1-2002(2012) Plastics－Somke generation－Part 1：Guidance on optical－density testing
  • KS M ISO 15791-1:2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
  • KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
  • KS M ISO 1043-2:2013 Plastics — Symbols and abbreviated terms-Part 2: Fillers and reinforcing materials
  • KS M ISO 1043-2:2003 Plastics-Symbols and abbreviated terms-Part 2 : Fillers and reinforcing materials
  • KS M ISO 9702:2002 Plastics－Amine epoxide hardners－Determination of primary, secondary and tertiary amine group nitrogen content
  • KS M ISO 1043-1:2013 Plastics — Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics
  • KS M ISO 1043-1:2010 Plastics-Symbols and abbreviated terms-Part 1:Basic polymers and their special characteristics
  • KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

KR-KS, plastic products

  • KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products
  • KS M ISO 15791-1-2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
  • KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

Professional Standard - Machinery, plastic products

  • JB/T 3820-2015 Plastics product hydraulic press.Testing of the accuracy
  • JB/T 3820-1984 Hydraulic press for plastic products Precision
  • JB/T 8458-1996 Auxiliary plastic products of electrical equipments General requirements and test method

CZ-CSN, plastic products

  • CSN 64 0008-1968 Construction of Plastic Products (Instruc- ions)
  • CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
  • CSN 64 7011-1975 Determination of mass of poromeres and other plastic products
  • CSN EN 23994-1995 Plastics products.Hose of polymer reinforced thermoplastics for suction and discharge(ISO 3994:1977)
  • CSN 64 7010-1975 Measurement of thickness, width and length of poromeres and other plastic products
  • CSN 64 7030-1976 Determination of layers adhesion of poromeres, artificial leathers etc. of multi layer plastics products
  • CSN 64 0701-1975 Sampling and conditioning of test pecimens of poromeres, artificial eathers etc. of plastics products

Professional Standard - Light Industry, plastic products

  • QB/T 6018-2020 Code for design of plastic products plant
  • QB/T 4881-2015 Safety technical specifications for reworked and recycled plastic products
  • QB 1532-1992 Rules in designing plastics processing plant for occupational safety and health

国家市场监督管理总局、中国国家标准化管理委员会, plastic products

  • GB/T 37866-2019 Green product assessment—Plastic products
  • GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
  • GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
  • GB/T 39935-2021 Plastics—Film and sheeting—Determination of blocking resistance
  • GB/T 40426.1-2021 Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, plastic products

  • GJB 5915-2006 Quality control for military plastics product
  • GJB 5426.13-2006 ClassifIc codes of material for National Defense Science, Technology & Industry Part 13: Rubber and plastics roducts

Military Standard of the People's Republic of China-General Armament Department, plastic products

German Institute for Standardization, plastic products

  • DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
  • DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
  • DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
  • DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
  • DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
  • DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
  • DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
  • DIN EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000
  • DIN 53421:1984 Testing of rigid cellular plastics; compression test
  • DIN EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
  • DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
  • DIN EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011); German version EN ISO 1043-2:2011
  • DIN-Fachbericht CEN/TR 15591:2007 Solid recovered fuels - Determination of the biomass content based on the C method; German version CEN/TR 15591:2007
  • DIN 61753:1969 Base sizes of sales units of textiles and plastics; table-covers and tilts
  • DIN EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95 % ethanol; German versio
  • DIN 53756:1974 Testing of plastics; storage test in contact with chemicals
  • DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
  • DIN EN 1186-1:2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration; German version EN 1186-1:2002
  • DIN EN 1186-9:2002 Materials and articles in contact with foodstuffs - Plastics - Part 9: Test methods for overall migration into aqueous simulants by article filling; German version EN 1186-9:2002
  • DIN EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling; German version EN 1186-8:2002

International Organization for Standardization (ISO), plastic products

  • ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
  • ISO 10093:1994 Plastics - Fire tests - Standard ignition sources
  • ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
  • ISO 3994:1977 Plastics products; Hose of polymer reinforced thermoplastics for suction and discharge
  • ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
  • ISO 10093:1994/Cor 1:1995 Plastics - Fire tests - Standard ignition sources; Technical Corrigendum 1
  • ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
  • ISO 13651:1996 Plastics - Epoxy resins and related materials - Determination of total saponifiable chlorine
  • ISO/TR 24699:2009 Rubber and rubber products - Environmental aspects - General guidelines for their inclusion in standards
  • ISO 22088-1:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance
  • ISO 22088-3:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method
  • ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics
  • ISO/TS 15791-2:2022 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

TR-TSE, plastic products

  • TS 785-1969 PLASTICS DETERMINATION OF THE REFRACTIVE INDEX OF TRANSPARENT PLASTICS
  • TS 1065-1972 COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS
  • TS 1096-1972 TEST FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS
  • TS 1066-1972 STANDARD METHOD OF TEST FOR FLAMMABILITY OF ?ELF - SUPPORTING PLASTICS
  • TS 3199-1978 Plastics - Melamine - Formaldehyde Mouldings- Determination Of Extractable Formaldehyde

British Standards Institution (BSI), plastic products

  • BS EN ISO 11469:2016 Tracked Changes. Plastics. Generic identification and marking of plastics products
  • BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
  • BS ISO 14899:2001 Plastics - Polyols for use in the production of polyurethane - Determination of basicity
  • BS ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
  • BS ISO 14848:1998 Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 °C
  • BS ISO 15100:2001 Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density
  • BS ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
  • BS ISO 12992:1996 Plastics. Vertical flame spread determination for film and sheet
  • BS ISO 12992:2017 Plastics. Vertical flame spread determination for film and sheet
  • BS ISO 14900:2001 Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number
  • BS ISO 15373:2001 Plastics - Polymer dispersions - Determination of free formaldehyde
  • BS 2456:1990 Specification for floats (plastics) for float operated valves for cold water services
  • BS ISO 14898:1999+A1:2011 Plastics. Aromatic isocyanates for use in the production of polyurethane. Determination of acidity
  • BS EN ISO 15310:2000 Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method
  • BS PD CEN/TR 15591:2007 Solid recovered fuels. Determination of the biomass content based on the ＜up 14＞C method
  • BS ISO 11907-1:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Guidance
  • BS ISO 14849:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method

Indonesia Standards, plastic products

  • SNI 06-4209-1996 Plastic - Determination of tensile properties
  • SNI 06-4209.3-1998 Plastics - Determination of tensile properties. Part 3 : Test condition for film and sheet

American Society for Testing and Materials (ASTM), plastic products

  • ASTM D883-08 Standard Terminology Relating to Plastics
  • ASTM D883-12 Standard Terminology Relating to Plastics
  • ASTM D883-11 Standard Terminology Relating to Plastics
  • ASTM F619-03 Standard Practice for Extraction of Medical Plastics
  • ASTM D5272-92(1999) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • ASTM F619-03(2008) Standard Practice for Extraction of Medical Plastics
  • ASTM D3045-92(2003) Standard Practice for Heat Aging of Plastics Without Load
  • ASTM D7611/D7611M-18 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-20 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-19 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-13 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-13e1 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7611/D7611M-10 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • ASTM D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • ASTM D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • ASTM D5272-08(2013) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • ASTM D5272-08 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • ASTM D5208-14 Standard Practice for Fluorescent Ultraviolet 40;UV41; Exposure of Photodegradable Plastics

Professional Standard - Commodity Inspection, plastic products

  • SN/T 2139-2008 Rules for the inspection of plastic products for import and export
  • SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method
  • SN/T 4313-2015 Determination of aluminum silicate refractory fibers in rubber and plastic products
  • SN/T 2692-2010 Determination of dioxins in plastic product.Gas chromatoghaphy-high resolution magnetic mass spectrometry

RU-GOST R, plastic products

  • GOST 24105-1980 Plastics products. Terms and definitions of defects
  • GOST 4.489-1989 Product-quality index system. Press moulds for manufacturing of plastic articles. Index nomenclature
  • GOST 27358-1987 Press moulds for manufacturing of plastic articles. General specifications
  • GOST 15948-1976 Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
  • GOST 15947-1970 Smooth forming pieces for moulding plastic articles. Method of size calculation

Taiwan Provincial Standard of the People's Republic of China, plastic products

  • CNS 4662-1984 Open Insert Nuts for Plastics Mouldings
  • CNS 4664-1984 Closed Insert Nuts with Dead Hole for Plastics Mouldings
  • CNS 4663-1984 Closed Insert Nuts with Disk for Plastics Mouldings
  • CNS 5821-1980 Determination of Resistance of Plastics to Colour Change Upon Exposure to Light of the Enclosed Carbon Arc
  • CNS 4665-1984 Insert Nuts Heavy Type for Plastics Mouldings and Pressure Die Castings with Dead Hole

JSAE - Society of Automotive Engineers of Japan@ Inc., plastic products

  • JASO M801-1993 Generic identification and marking system of plastics products

Professional Standard - Automobile, plastic products

  • QC/T 15-1992 General test method for automotive plastic products

YU-JUS, plastic products

BE-NBN, plastic products

Society of Automotive Engineers (SAE), plastic products

SAE - SAE International, plastic products

  • SAE J855-1987 Test Method of Stretch and Set of Textiles and Plastics@ Standard; (March 1987)
  • SAE J855-1985 Test Method of Stretch and Set of Textiles and Plastics

CEN - European Committee for Standardization, plastic products

  • PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
  • EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
  • EN ISO 1043-2:2001 Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials

ES-UNE, plastic products

  • UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication

PL-PKN, plastic products

Hainan Provincial Standard of the People's Republic of China, plastic products

  • DB46/T 505-2020 General technical requirements for fully biodegradable plastic products
  • DB46/T 520-2020 Rapid NMR Spectroscopy Detection Method for Fully Biodegradable Plastic Products

Professional Standard - Environmental Protection, plastic products

  • HJ/T 231-2006 Technical requirement for environmental labeling products Products made from recycled plastics
  • HJ 1207-2021 Technical Guidelines for Self-monitoring of Pollutants Discharging Rubber and Plastic Products
  • HJ 1122-2020 Technical Specifications for Application and Issuance of Pollutant Discharge Permits Rubber and Plastic Products Industry

American National Standards Institute （ANSI), plastic products

Association of German Mechanical Engineers, plastic products

  • VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
  • VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
  • VDI 3822 Blatt 2.1.2-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty processing
  • VDI 3822 Blatt 2.1.4-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by mechanical stress
  • VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material
  • VDI 3822 Blatt 2.1.10-2012 Failure analysis - Significant instrumental analysis methods for failure analysis of products made of plastics

European Committee for Standardization (CEN), plastic products

  • EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
  • prEN 23994-1992 Plastic products; hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
  • PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
  • EN ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
  • PD CEN/TR 15591:2007 Solid recovered fuels - Determination of the biomass content based on the 14C method
  • EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)

AT-ON, plastic products

  • ONORM EN 23994-1993 Plastics products - Hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)

Professional Standard-Ships, plastic products

  • CB/T 180-1998 Technology of marine GFRP products hand lay up method
  • CB 180-1998 Hand lay-up molding process of marine fiberglass reinforced plastic products

Fujian Provincial Standard of the People's Republic of China, plastic products

  • DB35/T 2126-2023 Quality management guidelines for food contact plastic product manufacturers
  • DB35/T 1868-2019 Determination of perfluorooctanoic acid content in plastic products by gas chromatography
  • DB35/T 1821-2019 Determination of short-chain chlorinated paraffins in plastic products by gas chromatography

国家质量监督检验检疫总局, plastic products

  • SN/T 4503-2016 Determination of 2-phenyl-2-propanol in plastics and plastic products by gas chromatography-mass spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic products

  • GB/T 33986-2017 Information description of product for electronic commerce transaction—Plastic product in contact with foodstuff

United States Navy, plastic products

AENOR, plastic products

  • UNE 41107:1961 PREFABRICATED PRODUCTS, SLASTICS AND OF LOW TRANSVERSAL DILATATION FOR THE FILLING OF EXPANSION JOINTS IN CONCRETE PAVINGS
  • UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
  • UNE-CEN/TR 15351:2008 IN Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items

Jiangxi Provincial Standard of the People's Republic of China, plastic products

  • DB36/ 1101.4-2019 Volatile Organic Compound Emission Standard Part 4: Plastic Products Industry

Professional Standard - Traffic, plastic products

  • JT/T 593-2004 Technical requirements and determination of weathering quality for plastics of highway furnatures

Chongqing Provincial Standard of the People's Republic of China, plastic products

  • DB50/T 867.33-2022 Safety Production Technical Specifications Part 33: Rubber and Plastic Products Enterprises

Sichuan Provincial Standard of the People's Republic of China, plastic products

  • DB51/T 2000-2015 Determination of optical brighteners in plastic products by high performance liquid chromatography

Lithuanian Standards Office , plastic products

  • LST EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)

SG-SPRING SG, plastic products

  • SS 69 AMD 1-1981 SPECIFICATION FOR FLOATS (PLASTICS) FOR FLOAT OPERATED VALVES FOR COLD WATER CISTERNS AMENDMENT NO. 1

Anhui Provincial Standard of the People's Republic of China, plastic products

Heilongjiang Provincial Standard of the People's Republic of China, plastic products

  • DB23/T 1496.10-2020 Standards for the provision of labor protection articles Part 10: Production personnel for rubber and plastic products
  • DB23/T 1496.10-2012 Standards for the provision of labor protection articles Part 10: Production personnel for rubber and plastic products

  plastic products, Ring Plastic Products, Composition of plastic products, Classification of plastic products, Phenol in plastic products, Phenol in plastic products, Plastic Products Other Food, Classification of plastic products, Emissions from plastic products, Scratch-resistant plastic products, Emissions from plastic products, plastic products for construction, Jiangbei Plastic Products, Xishuang Plastic Products, Analysis of plastic products, plastic smell, Plastic Products Testing, Plastic Products Industry, other plastic products, Plastic product tolerance.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved