ZH
RU
ES

Sample Concentration Method

Sample Concentration Method, Total:500 items.

In the international standard classification, Sample Concentration Method involves: Air quality, Food products in general, Prepackaged and prepared foods, Water quality, Road engineering, General methods of tests and analysis for food products, Organic chemicals, Beverages, Inorganic chemicals, Geology. Meteorology. Hydrology, Metalliferous minerals, Construction materials, Protection against dangerous goods, Laboratory medicine, Coals, Construction equipment, Milk and milk products, Fuels, Nuclear energy engineering, Pulps, Fibre optic communications, Products of the chemical industry, Non-metalliferous minerals, Protection against fire, Products of the textile industry, Welding, brazing and soldering, Analytical chemistry, Testing of metals, Ferroalloys, Leather technology, Internal combustion engines for road vehicles, Soil quality. Pedology, Explosion protection, Radiation measurements, Wastes, Mining and quarrying, Fertilizers, Machine tools, Ferrous metals, Medical sciences and health care facilities in general, Pesticides and other agrochemicals, Adhesives, Photography, Meat, meat products and other animal produce, Medical equipment, Farming and forestry, Raw materials for rubber and plastics, Radiation protection, Non-destructive testing, Animal feeding stuffs, Services, Textile fibres, Earthworks. Excavations. Foundation construction. Underground works, Powder metallurgy, Microbiology, Environmental protection, Paper and board, Electrical and electronic testing, Paints and varnishes, Fruits. Vegetables, Transport, Corrosion of metals, Spices and condiments. Food additives, Inks. Printing inks, Sugar. Sugar products. Starch.

British Standards Institution (BSI), Sample Concentration Method

BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS 4522:1988 Method for determination of absolute density at 20 °C of liquid chemical products for industrial use
BS ISO 13909-7:2002 Hard coal and coke - Mechanical sampling - Methods for determining the precision of sampling, sample preparation and testing
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
BS ISO 13909-7:2016 Tracked Changes. Hard coal and coke. Mechanical sampling. Methods for determining the precision of sampling, sample preparation and testing
BS 5660-2:2001 Methods of sampling iron ores - Sampling and sample preparation procedures
BS EN 17605:2022 Algae and algae products. Methods of sampling and analysis. Sample treatment
22/30450365 DC BS EN 14625. Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
BS 5309-2:1976 Methods for sampling chemical products - Sampling of gases
BS 5309-3:1976 Methods for sampling chemical products - Sampling of liquids
BS 5309-4:1976 Methods for sampling chemical products - Sampling of solids
BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
BS EN ISO 2313-1:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the horizontally folded specimen
BS EN ISO 2313-2:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the vertically folded specimen
BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS 4540-1:1981 Sampling of spices and condiments - Methods of sampling
BS 5662-2:1987 Evaluation of sampling methods for iron ores - Experimental methods for checking the precision of sampling
BS EN 196-7:2007 Methods of testing cement — Part 7: Methods of taking and preparing samples of cement

American Society for Testing and Materials (ASTM), Sample Concentration Method

ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2002) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2007) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM C562-91(2000) Standard Test Method for Moisture in a Graphite Sample
ASTM D2591-01 Method of Test for Linear Density of Elastomeric Yarn (Short Length Speciments)
ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
ASTM D1769-77(1982)e1 Method of Test for Linear Density of Cotton Fibers (Array Sample)
ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D2591-07 Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
ASTM E681-85 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E681-98 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM D6327-98 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D6327-98(2004) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D7687-23 Red Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration (Standard + Redline PDF Bundle)
ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D2194-02(2012) Standard Test Method for Concentration of Formaldehyde Solutions
ASTM D2194-22 Standard Test Method for Concentration of Formaldehyde Solutions
ASTM D1059-97 Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D1059-01 Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM E1077-01 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM E681-09(2023) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM E267-90(1995) Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM C39/C39M-20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-17a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-11a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-99 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-03 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-04a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-21 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-05e2 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-09 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-15 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-16a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-16b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM E1077-14 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM D1583-01(2008) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM E955-88(2004) Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM D6717-01 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D1059-17(2022) Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D3173-03(2008) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D1583-01(2018) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D3967-95a(2001) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967-95a Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM D3967-95a(2004) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D6717-07 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM B528-16 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM D1059-17 Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D1583-01 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-00 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-01(2013) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D4230-83(1996)e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D3549-03 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM E949-88(1996) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM E949-88(2004) Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample
ASTM B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM D1368-89 Test Method for Trace Concentrations of Lead in Primary Reference Fuels
ASTM E1515-03 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E681-01 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E1515-14(2022) Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E1515-14 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM D4453-91(1997) Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D4453-17 Standard Practice for Handling of High Purity Water Samples
ASTM D4453-11 Standard Practice for Handling of High Purity Water Samples
ASTM C561-91(2000) Standard Test Method for Ash in a Graphite Sample

European Committee for Standardization (CEN), Sample Concentration Method

EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
FprEN 17605-2021 Algae and algae products - Methods of sampling and analysis - Sample treatment
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
EN ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen (ISO 2313-2:2021)
EN ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen (ISO 2313-1:2021)
EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
EN 196-7:1989 Methods of testing cement; methods of taking and preparing samples of cement

RU-GOST R, Sample Concentration Method

GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
GOST 27709-1988 Canned condensed milk. The viscosity estimation method
GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST 938.15-1970 Leather. Method of measuring thickness of samples and thicknes of leather in the standard point
GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST 30527-1997 Metal-cutting machines. Checking methods of product specimen working accuracy
GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST R 52690-2006 Foods. Voltammetric method of vitamin C mass concentration determination
GOST ISO 11643-2013 Leather. Tests for colour fastness. Method for determination of colour fastness of small samples to solvents
GOST 14180-1980 Ores and concentrates of non-ferrous metals. Methods for sampling and preparation of samples for chemical analysis and determination of moisture
GOST 12430-1966 Agricultural products. Technique of inspection and sample extractions for examination and expertise
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
GOST 27109-1986 Synthetic rubbers. The methods of sampling and sample preparation
GOST 11304-1975 Turf. Method of assembled samples preparation
GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST 23231-1990 Sausages and cooked meat products. Method for determination of residual activity of acid phosphatase
GOST ISO 13909-7-2013 Hard coal and coke. Mechanical sampling. Part 7. Methods for determining the precision of sampling, sample preparation and testing
GOST 30305.3-1995 Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
GOST 11279.1-1983 Organic dyes. Testing method of dyeability (concentration), shade and purity
GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
GOST 31628-2012 Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
GOST R 51655-2000 Alcohol products and raw material for it's production. Method for determination of free and total sulphurous acid mass concentration
GOST 28570-1990 Concretes. Methods of strength evaluation on cores drilled from structures
GOST R 54004-2010 Food products. Methods of sampling for microbiological analyses
GOST 33444-2015 Starch and starch products. Sampling methods

Professional Standard - Electron, Sample Concentration Method

SJ/Z 3206.9-1989 Methods for inspection of standard samples or sample uniformity

Danish Standards Foundation, Sample Concentration Method

DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography

AENOR, Sample Concentration Method

UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
UNE 73340-3:2004 Procedure to obtain samples for the determination of environmental radioactivity. Analytical methods. Part 3: Determination of 89Sr and 90Sr concentration in soils and sediments.
UNE 40228-3:1974 METHOD FOR WASHING OF SUBSAMPLES OF WOOL.
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography

German Institute for Standardization, Sample Concentration Method

DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
DIN EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015
DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
DIN EN ISO 14284:2003 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002
DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
DIN EN 17605:2022-07 Algae and algae products - Methods of sampling and analysis - Sample treatment; German version EN 17605:2022
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN VDE 0405-3:1995 Determination of breath alcohol concentration - Part 3: Test method
DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN 58932-6:2021 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English

Association Francaise de Normalisation, Sample Concentration Method

NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF M60-412:1998 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration.
NF ISO 13909-7:2005 Houille et coke - Échantillonnage mécanique - Partie 7 : méthodes pour la détermination de la fidélité de l'échantillonnage, de la préparation de l'échantillon et de l'essai
NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
NF T90-455:2015 Water quality - Sampling and/or enumeration of Cryptosporidium oocystes and Giardia cysts - Concentration and enumeration method
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF EN 17605:2022 Algues et produits à base d'algues - Méthodes d'échantillonnage et d'analyse - Traitement des échantillons
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF EN 14625:2013 Air ambiant - Méthode normalisée de mesurage de la concentration en ozone par photométrie U.V
NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
NF P15-471-7*NF EN 196-7:2008 Methods of testing cements - Part 7 : methods of taking and preparing samples of cement.

Standard Association of Australia （SAA）, Sample Concentration Method

AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS 2891.9.2:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Presaturation method
AS 2891.9.3:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Mensuration method
AS 2891.7.3:2005 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Methylated spirits displacement
AS 2891.9.1:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Waxing procedure
AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods
AS 2806.5:2003(R2013)
AS/NZS 1301.207s:2007 Methods of test for pulp and paper - Determination of stock concentration
AS 1289.1.3.1:2015 Methods of testing soils for engineering purposes, Method 1.3.1: Sampling and preparation of soils — Undisturbed samples — Standard method

International Organization for Standardization (ISO), Sample Concentration Method

ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 13909-7:2001 Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO 13909-7:2016 Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO 7373:1987 Ferroalloys; Experimental methods for checking the precision of sample division
ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO/DIS 13909-7:1976 Coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
ISO 9499:1995 Fluorspar - Method of determining the precision of sampling and sample preparation
ISO 707:1985 Milk and milk products; Methods of sampling
ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen
ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen

American National Standards Institute （ANSI), Sample Concentration Method

ANSI/ASTM C562:2000 Test Method for Moisture in a Graphite Sample

HU-MSZT, Sample Concentration Method

Professional Standard - Meteorology, Sample Concentration Method

QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

Korean Agency for Technology and Standards (KATS), Sample Concentration Method

KS E ISO 13292:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the bias of sampling
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS M 2105-1995 Methods of measuring dust concentration in flue gas
KS D 0061-2005 Methods for measurement of dust concentration in welding environment
KS D 0061-1995 Methods for measurement of dust concentration in welding environment
KS B 0546-2016 Methods of mesurement for gas Concentration in welding environment
KS M 2105-2005(2010) Methods of measuring dust concentration in flue gas
KS E ISO 13909-8:2005 Hard coal and coke－Mechanical sampling－Part 8：Methods of testing for bias
KS E ISO 13909-7:2005 Hard coal and coke－Mechanical sampling－Part 7：Methods for determining the precision of sampling, sample preparation and testing
KS R 1033-2009 Diesel engine smoke measurement method
KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS E ISO 13909-7-2005(2020) Hard coal and coke－Mechanical sampling－Part 7：Methods for determining the precision of sampling, sample preparation and testing
KS E 3031-1977 Methods of sampling of rock and preparation of test piece for strength test
KS B 0546-1995 Methods of mesurement for gas Concentration in welding environment
KS B 0546-2021 Methods of measurement for gas concentration in welding environment
KS D ISO 7373:2003 Ferroalloys－Experimental methods for checking the precision of sample division
KS F 2419-2007 Standard test method for making polyester resin concrete specimens for strength test
KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS A 4513-1980(1995) MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS D 0061-2021 Methods for measurement of dust concentration in welding environment
KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
KS I ISO 9698:2008 Water quality-Determination of tritium activity concentration-Liquid scintillation counting method
KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS E ISO 12744:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the precision of sampling
KS E ISO 8530-2003(2019)
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS E 3047-2021 Garnierite nickel ores — Methods for sampling, sample preparation and determination of moisture content
KS E 3036-2004 Iron ores-Increment sampling and sample preparation-Mechanical method
KS E ISO 9599:2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS L 5300-2009 Determination of asbestos in bulk material

CH-SNV, Sample Concentration Method

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PL-PKN, Sample Concentration Method

PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment
PN Z04158-03-1986 Air purity protection ests of ethers etermination of izopropyl ther in work places by gas hromatography with sample nrichment
PN Z04166-02-1986 Air purity protection ests for octane etermination of octane in work laces by gas chromatography ith sample enrichment
PN Z04174-02-1986 Air purity protection ests for buthoxyethyl alcohol etermination of 2-buthoxyethyl lkohol in work places by gas hromatography with sample nrichment
PN Z04191-02-1988 Air purity protection Tests for ethylenediamine Determination of ethylenediamine in work places by gaschromatography with sample enrichment
PN A75101-04-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of total acidity
PN Z04189-02-1988 Air purity protection ests tor aminodiphcnyl etermination ot 4-aminodiphcnyl t work places by gas hromalography' with sample nrichment
PN Z04195-02-1988 Air punty protection ests for hexarnethylphosphotriamide etermination of examethylphosphotriamide in work laces by gas chromatography ith sample nrichment
PN A74001-1972 Cereal products Methods of sampling
PN Z04052-10-1990 Air purity protection Tests for chlorophenols Determination of o-chlorophenol in permanent residence area air by gas chromatography with sample enrichment
PN Z04079-10-1990 Air purity protection ? Tests for cresols Determina?ion of cresols in pennanenl residence area air by gas chromatography with sample enrichment
PN Z04163-02-1986 Air purity protection ests for cyklohexene etermination of cyklohexene n work places by gas chromatography ith sample enrichment
PN Z04164-02-1986 Air purity protection ests for methyl bromide etermination of methyl bromide n work places by gas chromatography ith sample enrichment
PN Z04167-02-1986 Air purity protection ests for methoxyethyl alcohol etermination of 2-methoxyethyl lcohol in work places by gas hromatography with sample nrichment
PN A78511-1973 Mushroom products Sampling, preparation of samples and method of microbiological analyses
PN Z04151-02-1986 Air purity protection Tests for cyclohexane Determination of cyclohexane in work places by gas chromatography with sample enrichment
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment
PN A75101-05-1990 Fruit and vegetable products Preparation of sarriples and testing methods Determination of volatile acidity
PN C04288-02-1987 Technical fats Methods for testing Sampling and prcparation of samples
PN Z04112-10-1989 Air purity protection , Tests for vinyl chloride Determination of vinyl chloride in permanent residence area air by gas chromatography with sample enrichment
PN Z04151-10-1990 Air purity protection Tests for cyclohexane Determination of cyclohexane in permanent residence area air by gas chromatography with sample enrichment
PN Z04160-02-1986 Air purity protection ests for methyl iodide etermination of methyl iodide in ork places by gas chromatography ith sample enrichment

ES-UNE, Sample Concentration Method

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE-EN 17605:2022 Algae and algae products - Methods of sampling and analysis - Sample treatment
UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)

国家煤炭工业局, Sample Concentration Method

MT/T 792-1998 Determination method of coal water slurry concentration

RO-ASRO, Sample Concentration Method

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS SR 13355-3-1999 Beer. Analysis methods. Determination of alcoholic concentration
STAS SR ISO 7373:1995 Ferroalloys - Experimental methods for checking the preclsion of sample division
STAS SR 13310-1995 Peat. Method of assembled samples preparation
STAS SR 13311-1995 Peat. Method of preparation of analysis sample

Canadian General Standards Board （CGSB), Sample Concentration Method

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

CEN - European Committee for Standardization, Sample Concentration Method

PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample Concentration Method

GB/T 27824-2011 Chemicals. Test method of acute inhalation toxicity. Fixed concentration procedure
GB/T 6921-1986 Determination of the concentration of airborne particulate matters
GB/T 13173.1-1991 Method of sample division for detergents
GB 2007.7-1987 General rules for sampling and sample preparation of bulk mineral products Particle size determination method - manual sieving method
GB/T 2007.7-1987 General rules for the sampling and sample preparation of minerals in bulk--The method for determination of size by manual sieving
GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
GB/T 16425-1996 Dctermination for minimum explosive concentration of dust cloud
GB/T 28371-2012 Ferroalloys.Experimental methods for checking the precision of sample division
GB/T 33057-2022 Sampling method for waste chemicals
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 16147-1995 Scintillation flask method for measuring radon concentration in the air
GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
GB/T 1605-2001 Sampling method for commodity pesticides
GB/T 19222-2003 Sampling of coal petrology
GB 475-1996 Sampling for commercial coal
GB/T 8142-1987 Methods of sampling lac products
GB/T 8142-2008 Methods of sampling lac products
GB/T 18856.2-2008 Test methods for coal water mixture.Part 2:Determination of mass percentage of solid
GB/T 23573-2009 Metal cutting machine tools.Determining method of dust concentration
GB/T 23574-2009 Metal cutting machines tools.Determination methods of oil mist concentration
GB/T 9695.19-1988 Meat and meat products--Sampling
GB/T 9695.19-2008 Meat and meat products.Sampling
GB/T 2007.2-1987 General rules for the sampling and sample preparation of minerals in bulk--Manual method of sample preparation
GB 2007.2-1987 General rules for sampling and sample preparation of bulk mineral products Manual sample preparation method
GB 2007.1-1987 General rules for sampling and sample preparation of bulk mineral products Manual sampling method
GB/T 2007.1-1987 General rules for the sampling and sample preparation of minerals in bulk--Sampling by manual method
GB/T 19495.7-2004 Detection of genetically modified organisms and derived products. Methods for sampling and sample preparation
GB/T 32553-2016 Fluorspar.Method of determining the precision of sampling and sample preparation
GB/T 18856.2-2002 Test methods for quality of coal water mixture--Part 2: Determination of the solid load of coal water mixture
GB/T 15057.1-1994 Limestone for chemical industry- Methods of sampling and preparing
GB/T 16773-1997 Method of preparing coal samples for the coal petrographic analysis
GB/T 1999-2008 Sampling of coking oil products
GB 475-2008 Method for manual sampling of commercial coal
GB/T 16773-2008 Method of preparing coal samples for the coal petrographic analysis
GB/T 8757-1988 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 2460-1996 Pyrites and concentrate--Methods for sampling and preparation sample
GB/T 1868-1995 Phosphate rock and concentrate--Methods of sampling and preparing sample
GB/T 28369-2012 Ferroalloys.Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling

国家煤矿安全监察局, Sample Concentration Method

MT 79-1984 Methods for determination of dust concentration and dispersion

VN-TCVN, Sample Concentration Method

TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
TCVN 4940-1989 Metal cutting machines.Methods for control of concentration
TCVN 5666-1992 Biological substances.Methods for sampling and storaging of samples
TCVN 4787-2009 Methods of testing cement.Methods of taking and preparing samples of cement
TCVN 5783-2009 Textiles.Yarns.Method for sampling
TCVN 5061-1990 Metallic powders.Methods of sampling and preparation of samples
TCVN 5347-1991 Graphite.Methods for sampling and preparation of samples for testing

Professional Standard - Traffic, Sample Concentration Method

JT/T 2014-1990 Method for Determination of Port Dust Concentration
JT 464-2001 Control mark and measuring methods of density of ore dust for harbor

Professional Standard - Construction Industry, Sample Concentration Method

JG/T 5088-1997 Evaluation method of cleanliness for fluid sample containers

未注明发布机构, Sample Concentration Method

ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions

Group Standards of the People's Republic of China, Sample Concentration Method

T/CBMF 118.2-2021 Methods for odour assessment of building materials - Part 2： odour concentration
T/SDAS 303-2021 Methods of Sampling, Sample Preparation and Preservation of Compost Samples
T/CSTM 00209-2020 Non-destructive testing-The electromagnetic method for measuring magnetic particle suspension concentration
T/FBS 002-2023 Sampling method for precious metal jewelry
T/ZSA 96.4-2021 Test methods for dialyzer — Part 4:Performance parameters of solute reduction ratio

ZA-SANS, Sample Concentration Method

SANS 13909-7:2001 Hard coal and coke - Mechanical sampling Part 7: Methods for determining the precision of sampling, sample preparation and testing

Indonesia Standards, Sample Concentration Method

SNI 14-1034-1989 Test method for suspension consistency of pulp
SNI 13-4120-1996 Method for sampling and preparation of non ferrous flotation concentrate
SNI 14-1029-1989 Method for sampling and preparation of pulp wood in logs for test
SNI 2326-2010 Sampling method in fishery products
SNI 08-0614-1989 Sampling method of fabrics for test and lot acceptance
SNI 08-4419-1997 Method for sampling of geotextiles for testing
SNI 07-0660-1989 Corrosion test specimens, Method of preparation, cleaning and evaluation
SNI 13-3607-1994 Phosphate deposit sample, Test methods for P2O5 carbon dioxide by spectrophotometer

CU-NC, Sample Concentration Method

NC 82-05-4-1984 Wines. Testing Methods Determination of Alcoholic Strength

IT-UNI, Sample Concentration Method

UNI 6463-1969
UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
UNI 5772-1966 Testing of inks for printing trade. Execution of a standardized printing.

International Telecommunication Union (ITU), Sample Concentration Method

ITU-T L.126-1996 Method for estimating the concentration of hydrogen in optical fibre cables

Professional Standard - Building Materials, Sample Concentration Method

JC/T 2110-2012 Indoor air ion concentration test method

Japanese Industrial Standards Committee (JISC), Sample Concentration Method

JIS Z 8808:2013 Methods of measuring dust concentration in flue gas
JIS Z 8808:1995 Methods of measuring dust concentration in flue gas
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS A 1306:2014 Measuring method of smoke density using light extinction method
JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS Z 4513:1977 Measuring methods of beta radioactivity concentration of drain water
JIS A 1306:1983 Measuring method of smoke density using light extinction method
JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS Z 8852:2013 Methods of continuous measurement for dust concentration in flue gas
JIS Z 3952:2005 Methods of measurement for gas concentration in welding environment
JIS A 1806:2011 Methods of test for production control of concrete -- Method of test for concentration of sludge water
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS A 1306 AMD 1:2008 Measuring method of smoke density using light extinction method (Amendment 1)
JIS M 8083:2001 Copper, lead and zinc sulfide concentrates -- Sampling procedures and methods for determination of moisture content
JIS Z 3950:2021 Methods of measurement for airborne dust concentration in welding environment
JIS Z 3950:2005 Methods of measurement for airborne dust concentration in welding environment
JIS A 1144:2001 Methods of test for chloride concentration in water of fresh concrete
JIS A 1144:2010 Method of test for chloride concentration in water of fresh concrete
JIS Z 8818:2002 Test method for minimum explosible concentration of combustible dusts

Inner Mongolia Provincial Standard of the People's Republic of China, Sample Concentration Method

DB15/T 3129-2023 Method for forecasting airborne pollen concentration levels
DB15/T 982-2016 Method for separating clump samples from wool samples

国家市场监督管理总局、中国国家标准化管理委员会, Sample Concentration Method

GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
GB/T 16425-2018 Determination for minimum explosive concentration of dust clouds
GB/T 38301-2019 Determination of limiting oxygen concentration (LOC) of flammable gases and vapours

Malaysia Standards, Sample Concentration Method

MS 281 Pt.1-1999

中华人民共和国国家卫生和计划生育委员会, Sample Concentration Method

WS/T 222-2002 Guideline for the measurement of catalytic concentration of clinical enzymes
GBZ/T 155-2002 Scintillation flask method for measuring radon concentration in the air
WS/T 349-2011 Reference method for determination of α-amylase catalytic activity concentration

KR-KS, Sample Concentration Method

KS D ISO 7373-2003(2023) Ferroalloys－Experimental methods for checking the precision of sample division
KS E ISO 9599-2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method

AT-ON, Sample Concentration Method

ONORM ISO 607:1986 Surface active agents; methods of sample division Agents de surface et detergents; methodes de division d'un echantillon
ONORM M 1156-1994 Testing methods for foundry sands - Sampling and Splitting of samples

Professional Standard - Aquaculture, Sample Concentration Method

SC/T 3016-2004 Method of sampling plans for fish and fishery products

IN-BIS, Sample Concentration Method

Hebei Provincial Standard of the People's Republic of China, Sample Concentration Method

DB13/T 2589-2017 Infrared Spectrophotometric Method for Determination of Industrial Fume Concentration

Military Standard of the People's Republic of China-General Armament Department, Sample Concentration Method

GJB 8342-2015 Method for determination of aerosol concentration and dispersion in field smoke screens

CZ-CSN, Sample Concentration Method

CSN 65 4821-1986 Fertilizers. Methods of sampling and treatment of samples
CSN 65 9022-1983 Reaktive dyestuffs. Method of concentration. and shade determinatlon.
CSN 65 9002-1987 Direct dyestuffs Method of dye concentration and shade determination
CSN 65 9220-1987 Sulphur dyestuffs. Method of dye concentration and shade determination
CSN 80 0310-1956
CSN 65 4822-1982 Minerál fertilizers Metliod of sample proparation

Professional Standard - Agriculture, Sample Concentration Method

GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier
NY/T 74-1988 Method for the sampling of wool
GB 1605-1979 Commercial Pesticide Sampling Methods
ZB B 45005-1988 wool sample collection method
GB 8142-1987 Lac product sampling method
水产品质量安全检验手册 1.3.1.5-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (5) Dialysis method
水产品质量安全检验手册 1.3.1.2-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (2) Precipitation method
水产品质量安全检验手册 1.3.1.6-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (6) Extraction method
水产品质量安全检验手册 1.3.1.1-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (1) Volatility method
水产品质量安全检验手册 1.3.1.4-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (4) Adsorption method
水产品质量安全检验手册 1.3.1.3-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (3) Distillation method

Professional Standard - Machinery, Sample Concentration Method

JB/T 9879-1999 Measuring method of oil mist concentration for metal cutting machine tools

Professional Standard - Coal, Sample Concentration Method

MT 262-1991 Coal rock sample collection method
MT/T 915-2002 Sampling for industrial briquette
MT/T 916-2002 Sample preparation of industrial briquette
MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures

煤炭工业部, Sample Concentration Method

MT/T 262-1991 Coal and rock sample collection methods

SE-SIS, Sample Concentration Method

SIS SS 13 42 05-1990 Methods of testing cement — Methods of taking and preparing samples of cement
SIS SS-ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
SIS SS-ISO 8761:1990 Work-place air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short- term sampling with direct indication

NL-NEN, Sample Concentration Method

NEN-EN 196-7-1993 Methods of testing cement. Methods of taking and preparing samples of cement

GOSTR, Sample Concentration Method

GOST 12430-2019 Plant quarantine. Sampling methods and rates for regulated products during quarantine phytosanitary inspection and laboratory analysis
GOST R 54760-2011 Мilk products and infant milk products. Method for determination of mass concentration of mono- and disugar using high performance liquid chromatography
GOST 28570-2019 Concretes. Methods of strength determination on cores selected from structures

TR-TSE, Sample Concentration Method

TS 707-1980 METHOD FOR SARPLING OF AGGREGATES FOR CONCRETE AND REDUCING SARPLES TO TESTING SIZE
TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER
TS 2150-1975 BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS : GRAB METHOD

Professional Standard - Chemical Industry, Sample Concentration Method

HG/T 2956.2-2001 Ascharite ores - Methods of sampling and preparing sample
HG/T 2957.2-2004 Alunite ore sampling and sample preparation method

Lithuanian Standards Office , Sample Concentration Method

LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography

FI-SFS, Sample Concentration Method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sample Concentration Method

GB/T 33057-2016 Sampling method of discarded chemicals
GB/T 475-2008 Method for manual sampling of commercial coal

BE-NBN, Sample Concentration Method

NBN T 63-002-1980 Surface active agents and detergents- Methods of sample division
NBN 52.001-1955

Professional Standard - Aviation, Sample Concentration Method

HB 5618.3-1988 Basic Product Drawing Management System (Lifesaving Specialty) Format and Filling Method of Product Drawings and Technical Documents

Professional Standard - Nuclear Industry, Sample Concentration Method

EJ 194.3-1982 Environmental samples.Method for analyzing total trace of mercury in biological samples

National Health Commission of the People's Republic of China, Sample Concentration Method

WST 349:2011 Reference method for determination of α-amylase catalytic activity concentration
WST 361:2011 Reference method for determination of catalytic activity concentration of lactate dehydrogenase

Professional Standard - Commodity Inspection, Sample Concentration Method

SN/T 3997-2014 Methods for sampling and sample preparation of laterite nickel ores in bulk

Ningxia Provincial Standard of the People's Republic of China, Sample Concentration Method

DB64/T 1016-2014 Refined Oil Sampling Method at Gas Station

Guangxi Provincial Standard of the People's Republic of China, Sample Concentration Method

DB45/T 2319-2021 Tritium Analysis Method in Biological Samples

NO-SN, Sample Concentration Method

NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

Professional Standard - Hygiene , Sample Concentration Method

WS/T 361-2011 Reference procedure for the measurement of catalytic activity concentration of lactate dehydrogenase

交通运输部, Sample Concentration Method

JT/T 1376-2021 Port coal dust concentration control indicators and test methods

SAE - SAE International, Sample Concentration Method

SAE AS6507-2015 Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling

Society of Automotive Engineers (SAE), Sample Concentration Method

SAE AS6507-2021 Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling