Quantitative sample concentration

Quantitative sample concentration, Total:500 items.

In the international standard classification, Quantitative sample concentration involves: Metalliferous minerals, Air quality, Construction materials, Nuclear energy engineering, Beverages, General methods of tests and analysis for food products, Prepackaged and prepared foods, Food products in general, Microbiology, Spices and condiments. Food additives, Animal feeding stuffs, Laboratory medicine, Milk and milk products, Water quality, Paints and varnishes, Analytical chemistry, Raw materials for rubber and plastics, Road engineering, Particle size analysis. Sieving, Products of the textile industry, Inorganic chemicals, Organic chemicals, Protection against fire, Fluid power systems, Testing of metals, Protection against dangerous goods, Diagnostic, maintenance and test equipment, Geology. Meteorology. Hydrology, Wood-based panels, Environmental protection, Fuels, Radiation protection, Products of the chemical industry, Fruits. Vegetables, Radiation measurements, Wastes, Rubber and plastics products.

GSO, Quantitative sample concentration

GSO ISO 310:2015 Manganese ores and concentrates -- Determination of hygroscopic moisture content in analytical samples -- Gravimetric method
GSO ISO 12744:2014 Copper, lead, zinc and nickel concentrates -- Experimental methods for checking the precision of sampling
GSO ISO 12743:2014 Copper, lead, zinc and nickel concentrates -- Sampling procedures for determination of metal and moisture content
GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
OS GSO ISO 13271:2015 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
BH GSO ISO 13271:2017 Stationary source emissions -- Determination of PM10/PM2,5 mass concentration in flue gas -- Measurement at higher concentrations by use of virtual impactors
GSO ISO 12803:2013 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
GSO ISO 23210:2024 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
GSO ISO 18153:2016 In vitro diagnostic medical devices -- Measurement of quantities in biological samples -- Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
OS GSO ISO 18153:2016 In vitro diagnostic medical devices -- Measurement of quantities in biological samples -- Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
BH GSO ISO 18153:2017 In vitro diagnostic medical devices -- Measurement of quantities in biological samples -- Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
OS GSO ISO 12803:2013 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
GSO ISO 10258:2013 Copper sulfide concentrates -- Determination of copper content -- Titrimetric methods
GSO ISO 126:2015 Natural rubber latex concentrate -- Determination of dry rubber content
GSO ISO 4295:2015 Manganese ores and concentrates -- Determination of aluminium content -- Photometric and gravimetric methods
GSO ISO 13545:2015 Lead sulfide contentrates -- Determination of lead content -- EDTA titration method after acid digestion
GSO ISO 9096:2021 Stationary source emissions — Manual determination of mass concentration of particulate matter
BH GSO ISO 9096:2022 Stationary source emissions — Manual determination of mass concentration of particulate matter
GSO ISO 8761:2017 Work-place air -- Determination of mass concentration of nitrogen dioxide -- Method using detector tubes for short-term sampling with direct indication
GSO ISO 10396:2009 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently installed monitoring systems
OS GSO ISO 8761:2017 Work-place air -- Determination of mass concentration of nitrogen dioxide -- Method using detector tubes for short-term sampling with direct indication
GSO ISO 16000-7:2009 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
GSO ISO 12739:2015 Zinc sulfide concentrates -- Determination of zinc -- Ion-exchange/EDTA titrimetric method
GSO ISO 11564:2021 Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Naphthylethylenediamine photometric method
BH GSO ISO 11564:2022 Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Naphthylethylenediamine photometric method
GSO 940:1997 Determination of the compressive strength of concrete specimens .
OS GSO ISO 16000-7:2009 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
BH GSO ISO 11665-4:2017 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
OS GSO ISO 8760:2013 Work place air- Determination of mass concentration of carbon monoxide – method using detector tubes for short-term sampling with direct indication
BH GSO ISO 8760:2015 Work place air- Determination of mass concentration of carbon monoxide – method using detector tubes for short-term sampling with direct indication

SCC, Quantitative sample concentration

BS EN 1948-1:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs-Sampling
NS-EN 1948-1:1996 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs — Part 1: Sampling
UNE-EN 1948-1:1997 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS. PART 1: SAMPLING.
UNE 77218:1996 STATIONARY SOURCE EMISSIONS. SAMPLING FOR THE AUTOMATED DETERMINATION OF GAS CONCENTRATIONS
DIN EN 17346 E:2019 Draft Document - Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling; German and English version prEN 17346:2019
DANSK DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
UNE 84072:1992 COSMETIC RAW MATERIALS. ETHANOL. DETERMINATION OF STRENGTH
DANSK DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DANSK DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
NS-EN 1948-1:2006 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 1: Sampling of PCDDs/PCDFs
BS EN 1948-3:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs-Identification and quantification
NS-EN ISO 23210:2009 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at low concentrations by use of impactors (ISO 23210:2009)
AENOR UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2.5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
NS-EN 16339:2013 Ambient air — Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DANSK DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
AWWA WQTC56964 Assessment of the Effects of Holding Time and Temperature on E. coli Concentrations in Surface Water Samples
11/30204376 DC BS ISO 13271. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
VDI 3486 BLATT 2-1979 Measuring gaseous emissions; Measuring hydrogen sulphide concentration; Iodometric titration method
DANSK DS/ISO 21877:2019 Stationary source emissions – Determination of the mass concentration of ammonia – Manual method
AS 1561:1973 The determination of the number of threads per unit length in a sampleof woven fabric
VDI 2453 BLATT 3-1995 Measuring gaseous emissions — Measuring nitrogen monoxide and nitrogen dioxide concentrations — Producing test gases and determining their concentration
NS-EN 17346:2020 Ambient air — Standard method for the determination of the concentration of ammonia using diffusive samplers
DANSK DS/EN 17346:2020 Ambient air – Standard method for the determination of the concentration of ammonia using diffusive samplers
AS 2636:1988 Sampling of venous and capillary blood for the determination of lead or cadmium concentration
VDI 3487 BLATT 1-1978 Measuring gaseous emissions; Measuring carbon disulfide concentration; Iodometric titration method
DANSK DS/EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
NS-EN 12619:1999 Stationary source emissions — Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases — Continuous flame ionisation detector method
DANSK DS/ISO 9096:2017 Stationary source emissions – Manual determination of mass concentration of particulate matter
AS L44:1965 The determination of the number of threads per unit length in a sample of woven fabric
DANSK DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
NS-EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
DANSK DS/EN 13725/AC:2003 Air quality - Determination of odour concentration by dynamic olfactometry
VDI 3486 BLATT 2-1979 Measuring gaseous emissions; Measuring hydrogen sulphide concentration; Iodometric titration method
VDI 3486 BLATT 1-1979 Measuring gaseous emissions; Measuring hydrogen sulphide concentration; Potentiometric titration method
VDI 3487 BLATT 1-1978 Measuring gaseous emissions; Measuring carbon disulfide concentration; Iodometric titration method
DANSK DS/CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
SN-CEN/TS 1948-5:2015 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
NS-EN 14412:2004 Indoor air quality — Diffusive samplers for the determination of concentrations of gases and vapours — Guide for selection, use and maintenance
DANSK DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
AS 2122.2:1978 Combustion propagation characteristics of plastics - Determination of minimum oxygen concentration for flame propagation following top surface ignition of vertically oriented specimens
BS ISO 11665-4:2020 Measurement of radioactivity in the environment. Air: radon-222-Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
UNE-EN 12619:2000 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON AT LOW CONCENTRATIONS IN FLUE GASES - CONTINUOUS FLAME IONISATION DETECTOR METHOD.
07/30142572 DC BS EN ISO 23210. Stationary source emissions. Determination of PM 10/PM 2.5 mass concentration in flue gas. Part 1. Measurement at low concentrations by use of impactors
AENOR UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
AENOR UNE 41127:1959 TAKING SAMPLES, PREPARING THE SAMPLES AND DETERMINING THE THICKNESS OF THE WOOD FIBER BOARDS
BS 1747-2:1964 Methods for the measurement of air pollution. Determination of concentration of suspended matter
11/30228336 DC BS EN 13205. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
DIN EN 16339 E:2011 Draft Document - Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version prEN 16339:2011
DANSK DS/EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
SN-CEN/TR 15547:2007 Workplace atmospheres — Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DANSK DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
NS-EN 13205-4:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 4: Laboratory performance test based on comparison of concentrations
DANSK DS/CEN/TS 17021:2017 Stationary source emissions – Determination of the mass concentration of sulphur dioxide by instrumental techniques
BS EN 1948-2:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs-Extraction and clean-up
NS-EN ISO 21877:2019 Stationary source emissions – Determination of the mass concentration of ammonia – Manual method (ISO 21877:2019)
AENOR UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
AWWA WSC70017 A Semi-Automatic Ultrafiltration Device for the Concentration of Microorganisms in Large Volume Drinking Water Samples
DIN EN ISO 23210-1 E:2007 Draft Document - Stationary source emissions - Determination of PM10/PM2.5 mass concentration in flue gas - Part 1: Measurement at low concentrations by use of impactors (ISO/DIS 23210-1:2007); German version prEN ISO 23210-1:2007
UNE-EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-CEN/TS 1948-4:2009 EX Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
VDI 3486 BLATT 1-1979 Measuring gaseous emissions; Measuring hydrogen sulphide concentration; Potentiometric titration method
DANSK DS/EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
DANSK DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
NS-EN 13211:2001 Air quality — Stationary source emissions — Manual method of determination of the concentration of total mercury
DANSK DS/EN 13211/AC:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
NS-EN 14791:2005 Stationary source emissions — Determination of mass concentration of sulphur dioxide — Reference method
UNE-EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
DANSK DS/EN ISO 21877:2019 Stationary source emissions – Determination of the mass concentration of ammonia – Manual method (ISO 21877:2019)
DIN EN 13205-4 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version prEN 13205-4
12/30259171 DC BS EN 13205-4. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations
NS-EN ISO 18153:2003 In vitro diagnostic medical devices — Measurement of quantities in biological samples — Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
AWWA WQTC71471 Quantifying and Modeling Uncertainty of Lead Concentration Measured at Customer's Taps

British Standards Institution (BSI), Quantitative sample concentration

BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
BS EN 1948-1:2006(2019) Stationary source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin - like PCBs Part 1 : Sampling of PCDDs / PCDFs
BS PD CEN/TS 1948-5:2015 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Long-term sampling of PCDDs/PCDFs and PCBs
BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS EN ISO 16000-7:2007 Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs
BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
BS EN 13284-1:2017 Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
DD CEN/TS 1948-4:2007 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 4: Sampling and analysis of dioxin-like PCBs
23/30472312 DC BS EN 16339 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
BS EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS EN 13205-2:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency
BS EN ISO 2313-1:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the horizontally folded specimen
BS EN ISO 2313-2:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the vertically folded specimen
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography

International Organization for Standardization (ISO), Quantitative sample concentration

ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
ISO 11598:1995 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 12803:1997 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
ISO 8916:1988 Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 6767:1990 Ambient air; determination of the mass concentration of sulfur dioxide; tetrachloromercurate (TCM)/pararosaniline method
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
ISO 8761:1989 Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication
ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO/PRF 12141:2024 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen
ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method

RO-ASRO, Quantitative sample concentration

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS 8613/6-1980 CONCENTRATED FOODSTUFF Determination of nitrogen content
STAS 8613/4-1980 CONCENTRATED FOOD STUFF Determination of acidity of aqueous extract
STAS 8613/1-1980 CONCENTRATED FOODSTUFF Determination of moisture content
STAS 8613/2-1970 CONCENTRATED FOODSTUFF Determination of ash content
STAS 8613/5-1980 CONCENTRATED FOODSTUFF Determination of fat content
STAS 6369-1969 Semi-finished fiber products for the paper and pulp industries. Concentration determination
STAS SR ISO 10313:1995 Ambient air - Detennination of the mass concentration of ozon -Chemiluminescence method

Association Francaise de Normalisation, Quantitative sample concentration

NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
NF M60-412:1998 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration.
NF ISO 25597:2014 Emissions from stationary sources - Test method for the determination of the mass concentration of PM 2.5 and PM 10 in gases emitted at the stack using cyclone samplers and sample dilution
NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
NF EN ISO 23210:2009 Emissions from stationary sources - Determination of the mass concentration of PM10/PM2.5 in gaseous effluents - Measurement at low concentrations using impactors
NF X43-324-1*NF EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs
NF EN 1948-1:2006 Emissions from stationary sources - Determination of the mass concentration of PCDD/PCDF and dioxin-like PCBs - Part 1: sampling of PCDD/PCDF
NF ISO 13271:2012 Emissions from stationary sources - Determination of the mass concentration of PM10/PM2.5 in gaseous effluents - Measurement at high concentrations using virtual impactors
NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
NF EN ISO 21877:2019 Emissions from stationary sources - Determination of ammonia mass concentration - Manual method
NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Ambient air - Standard method for the determination of ammonia concentration using diffusion samplers
NF EN 16339:2013 Ambient air - Method for determining the concentration of nitrogen dioxide using diffusion samplers
NF EN 13205-5:2014 Workplace exposure - Performance assessment of sampling devices for measuring airborne particulate matter concentrations - Part 5: performance testing of aerosol samplers, react...
NF ISO 10396:2007 Emissions from Stationary Sources - Sampling for automated determination of gas emission concentrations for stationary monitoring systems
XP X43-324-5*XP CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5 : long-term sampling of PCDDs/PCDFs and PCBs
XP CEN/TS 1948-5:2015 Emissions from stationary sources - Determination of the mass concentration of PCDD/PCDF and dioxin-like PCBs - Part 5: long-term sampling of PCDD/PCDF and PCBs
NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
NF X43-372:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method.
NF EN 14884:2022 Emissions from stationary sources - Determination of total mercury concentration - Automated measuring systems
NF EN 17042:2018 Engrais - Dosage du bore dans des concentrations > à 10 % par titrage acidimétrique
NF X44-052:2002 Emissions from stationary sources - Determination of high mass concentrations of dust - Manual gravimetric method
XP X43-321:2018 Air quality - Emissions from stationary sources - Determination of the mass concentration of ammonia by instrumental techniques
NF EN 14412:2004 Indoor air quality - Diffusion sampling for the determination of the concentration of gases and vapors - Guide for selection, use and maintenance
NF ISO 8761:1990 Air in workplaces - Determination of the mass concentration of nitrogen dioxide - Method using detector tubes for rapid direct reading sampling
NF ISO 8760:1990 Air in workplaces - Determination of the mass concentration of carbon monoxide - Method using detector tubes for rapid direct reading sampling
NF G07-108:1986 Textiles. Determination of the heat retention of materials by measurement of the thickness and mass of specimens.
FD X43-284*FD CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
XP CEN/TS 17021:2018 Emissions from stationary sources - Determination of sulfur dioxide mass concentration by instrumental techniques
NF X43-324-4*NF EN 1948-4+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF EN 1948-4/IN1:2014 Emissions from stationary sources - Determination of the mass concentration of PCDD/PCDF and dioxin-like PCBs - Part 4: sampling and analysis of dioxin-like PCBs
NF EN 1948-4+A1:2014 Emissions from stationary sources - Determination of the mass concentration of PCDD/PCDF and dioxin-like PCBs - Part 4: sampling and analysis of dioxin-like PCBs
NF EN 13211:2001 Air quality - Emissions from stationary sources - Manual method for determining the concentration of total mercury
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF X43-404-7*NF EN ISO 16000-7:2007 Indoor air - Part 7 : sampling strategy for determination of airborne asbestos fibre concentrations
NF EN ISO 16000-7:2007 Indoor air - Part 7: sampling strategy for determining concentrations of airborne asbestos fibers
NF M60-763-4*NF ISO 11665-4:2021 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
NF EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Metrological traceability of catalytic concentration values of enzymes attributed to calibration agents and materials...
NF EN 13284-1:2017 Emissions from stationary sources - Determination of low mass concentrations of dust - Part 1: manual gravimetric method
NF EN 14662-3:2015 Ambient air quality - Standardized method for measuring benzene concentration - Part 3: sampling by automatic pumping with gas chromatographic analysis on site
NF X43-339*NF ISO 11564:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method.

IPC - Association Connecting Electronics Industries, Quantitative sample concentration

IPC TM-650 2.3.35.2A-2004 Fluoride Concentration@ Fluxes - Quanitative
IPC TM-650 2.3.35.2-1995 Fluoride Concentration@ Fluxes - Quanitative

VN-TCVN, Quantitative sample concentration

TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
TCVN 7556-1-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDDs/PCDFs.Part 1: Sampling
TCVN 6192-2010 Stationary source emmissions.Sampling for the automated determination of gas emission concentrations for permanently.installed monitoring systems
TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 7172-2002 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method

RU-GOST R, Quantitative sample concentration

GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
GOST R 52690-2006 Foods. Voltammetric method of vitamin C mass concentration determination
GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R ISO 10396-2006 Stationary source emissions. Sampling for the automated determination of gas concentrations
GOST 30305.3-1995 Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
GOST 31628-2012 Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
GOST 27709-1988 Canned condensed milk. The viscosity estimation method
GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST 19413-1989 Drinking water. Method for determination of selenium mass concentration
GOST 23950-1988 Drinking water. Method for determination of strontium mass concentration
GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials
GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
GOST R 55247-2012 Dairy componented and milkcontained products. Determination of fat mass concentration by Weibull-Berntrop method
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
GOST 32930-2014 Ethanol from food raw material, strong drinks. Spectrophotometric method for determination of the mass concentration of furfurol
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
GOST 28326.5-1989 Technical liquid ammonia. Determination of iron mass concentration by method of photocolorimetry
GOST R 51655-2000 Alcohol products and raw material for it's production. Method for determination of free and total sulphurous acid mass concentration
GOST R ISO 16000-7-2011 Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations
GOST R ISO 10396-2012 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems

Standard Association of Australia （SAA）, Quantitative sample concentration

AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias
AS 2636:1994 Sampling of venous and capillary blood for the determination of lead or cadmium concentration
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
AS 2891.9.3:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Mensuration method
AS 2891.9.1:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Waxing procedure
AS 2891.9.2:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Presaturation method

未注明发布机构, Quantitative sample concentration

ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
ASTM RR-D19-1162 1998 D3977-Test Methods for Determining Sediment Concentration in Water Samples
DIN EN 1948-1:1997 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
VDI 2267 Blatt-4 E:2022-02 Determination of suspended matter in ambient air – Measurement of the concentration of total gaseous mercury after manual sampling
VDI 2267 Blatt 4-2023 Determination of suspended matter in ambient air - Measurement of the concentration of total gaseous mercury after manual sampling
VDI 2267 Blatt 4-2023 Determination of suspended matter in ambient air - Measurement of the concentration of total gaseous mercury after manual sampling
DIN EN 1948-1 E:2004-02 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
DIN EN 16339 E:2011-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DIN CEN/TS 1948-5:2015*DIN SPEC 33970:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
DIN EN 1948-3:1997 Emissions from stationary sources —— Determination of mass concentration of PCDD/PCDF I Part 3: Identification and quantification
DIN EN 17346 E:2019-03 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN ISO 21877 E:2018-05 Manual method for determination of ammonia mass concentration emitted from stationary sources (draft)
DIN CEN/TS 17021:2017*DIN SPEC 33976:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration

KR-KS, Quantitative sample concentration

KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS E ISO 9599-2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS A 0082-2008(2023) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter

European Committee for Standardization (CEN), Quantitative sample concentration

EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-1:1996 Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 1: Sampling
CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
PD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
EN ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen (ISO 2313-2:2021)
EN ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen (ISO 2313-1:2021)
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

GOST, Quantitative sample concentration

GOST 34789-2021 Brewing products. Identification. Determination of mass concentration of total nitrogen by Kjeldahl method
GOST R 50068-2022 Pulps. Accelerated method of determination of stock concentration
GOST 34798-2021 Brewing products. Identification. Photoelectrocalorimetric method of determination of mass concentration of polyphenols
GOST 34799-2021 Brewing products. Identification. Photoelectrocalorimetric method of determination mass concentration of в-glucan
GOST 34711-2021 Natural gas. Determination of water vapors mass concentration
GOST 4386-1981 Drinking water. Methods for determining the mass concentration of fluorine
GOST R 70378.4-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations
GOST 34800-2021 Brewery products. Identification. Determination of the exogenous glycerol components by chromatography-mass spectrometry method

HU-MSZT, Quantitative sample concentration

MSZ 14352-1978 Sample collection and concentration detection of radioactive suspended particles
MSZ 14045/8.lap-1969 Land mechanical survey. concentration limit
MSZ KGST 2231-1980 Sample taking and sample preparation of alumina for mixture and moisture determination

PL-PKN, Quantitative sample concentration

PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment
PN Z04158-03-1986 Air purity protection ests of ethers etermination of izopropyl ther in work places by gas hromatography with sample nrichment
PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
PN Z04151-02-1986 Air purity protection Tests for cyclohexane Determination of cyclohexane in work places by gas chromatography with sample enrichment
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment
PN Z04166-02-1986 Air purity protection ests for octane etermination of octane in work laces by gas chromatography ith sample enrichment
PN Z04174-02-1986 Air purity protection ests for buthoxyethyl alcohol etermination of 2-buthoxyethyl lkohol in work places by gas hromatography with sample nrichment
PN Z04191-02-1988 Air purity protection Tests for ethylenediamine Determination of ethylenediamine in work places by gaschromatography with sample enrichment
PN Z04111-03-1989 Air purity protection "Microbiological testings Determination number of the fungi in the atmospheric air (imision) wiht sampling by aspiration and sedimentation method
PN Z04151-10-1990 Air purity protection Tests for cyclohexane Determination of cyclohexane in permanent residence area air by gas chromatography with sample enrichment
PN Z04195-02-1988 Air punty protection ests for hexarnethylphosphotriamide etermination of examethylphosphotriamide in work laces by gas chromatography ith sample nrichment
PN Z04052-10-1990 Air purity protection Tests for chlorophenols Determination of o-chlorophenol in permanent residence area air by gas chromatography with sample enrichment
PN Z04079-10-1990 Air purity protection ? Tests for cresols Determina?ion of cresols in pennanenl residence area air by gas chromatography with sample enrichment
PN Z04163-02-1986 Air purity protection ests for cyklohexene etermination of cyklohexene n work places by gas chromatography ith sample enrichment
PN Z04164-02-1986 Air purity protection ests for methyl bromide etermination of methyl bromide n work places by gas chromatography ith sample enrichment
PN Z04167-02-1986 Air purity protection ests for methoxyethyl alcohol etermination of 2-methoxyethyl lcohol in work places by gas hromatography with sample nrichment
PN Z04184-02-1988 Air purity protection Tests for 2-methoxyethyl acetate Determination of 2-methoxyethyl= acetate in work places by gas chromatography with sample enrichment
PN Z04165-02-1986 Air purity protection esls lor methylbutylkelonc cterminution ol meihylisobutylketonc work places b\ gus chromatogruphy illi siimplc cnridimcni

Korean Agency for Technology and Standards (KATS), Quantitative sample concentration

KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS E ISO 9599:2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS A 0082-2023 Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 13271-2019 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS P ISO 18153-2021 In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 6767:2006 Ambient air－Determination of the mass concentration of sulphur dioxide [Tetrachloromercurate (TCM)/pararosaniline method]
KS I ISO 8760:2008 Work-place air－Determination of mass concentration of carbon monoxide－Method using detector tubes for short-term sampling with direct indication
KS I ISO 8761:2008 Work-place air－Determination of mass concentration of nitrogen dioxide－Method using detector tubes for short-term sampling with direct indication
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS M ISO 758:2011 Liquid chemical products for industrial use-Determination of density at 20 ℃
KS M ISO 758:2016 Liquid chemical products for industrial use－Determination of density at 20 ℃
KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
KS I ISO 11564-2014(2019) Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
KS I ISO 11564-2019 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
KS I ISO 10396-2009(2019) Stationary source emissions－Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS E ISO 12739:2007 Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
KS I ISO 16000-7:2009 Indoor air－Part 7：Sampling strategy for determination of airborne asbestos fibre concentrations
KS M ISO 4591-2007(2022) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS I ISO 11564:2004 Stationary source emissions-Determination of the mass concentrationof nitrogen oxides(Naphthylethylenediamine photometric method)
KS I ISO 11564:2014 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)

CEN - European Committee for Standardization, Quantitative sample concentration

PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

German Institute for Standardization, Quantitative sample concentration

DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
DIN 58932-1:2023-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, influence quantities, interference factors; Text in German and English
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006
DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 16339:2023 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German and English version prEN 16339:2023
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN ISO 18153:2003-11 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003); German version EN ISO 181...
DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
DIN CEN/TS 1948-5:2015-06*DIN SPEC 33970:2015-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
DIN EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
DIN EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04
DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); English version of DIN EN ISO 16000-7:2007-11
DIN CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version CEN/TS 1948-4:2007
DIN 58932-1:2023 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, biological influence factors, interference factors; Text in German and English

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Quantitative sample concentration

IPC TM-650 2.3.35.2-2004 Fluoride Concentration, Fluxes - Quanitative Revision A

AENOR, Quantitative sample concentration

UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE-EN 1948-1:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 13725:2004 Air quality - Determination of odour concentration by dynamic olfactometry
UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
UNE 77228:2002 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method.
UNE-EN 1948-4:2011+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

American Society for Testing and Materials (ASTM), Quantitative sample concentration

ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM D7687-23 Red Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration (Standard + Redline PDF Bundle)
ASTM D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration

Japanese Industrial Standards Committee (JISC), Quantitative sample concentration

JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
JIS M 8083:2001 Copper, lead and zinc sulfide concentrates -- Sampling procedures and methods for determination of moisture content

CU-NC, Quantitative sample concentration

NC 44-12-15-1985 Ores. Copper Concentrates Silver and Gold Gravimetric Determination
NC 44-12-14-1985 Ores. Copper Concentrates Volumetric Determinatlon of Aluminum Oxide
NC 44-12-2-1984 Ores Copper Cencentrates. Gravimetrie Determination of Silionum Diexide

GOSTR, Quantitative sample concentration

GOST 34128-2017 Juice products. Refractometric method for the determination of soluble solids mass concentration
GOST 28326.4-1989 Technical liquid ammonia. Determination of oil mass concentration by spectrophotometry method
GOST R 58797-2020 Drinking bottled water. Determination of mass concentration of dissolved oxygen. Measurement procedure
GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method
GOST 33834-2016 Wine products and raw materials for it’s production. Gas chromatographic method for determination of mass concentration of volatile components
GOST R 57893-2017 Products of fermentation and raw materials for it’s production. Gas chromatographic method for determination of mass concentration of volatile components

BELST, Quantitative sample concentration

STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests

Danish Standards Foundation, Quantitative sample concentration

DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DS/EN 13725/AC:2006 Air quality – Determination of odour concentration by dynamic olfactometry
DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
DS/ISO 758:1986 Liquid chemical products for industrial use. Determination of density at 20 Centigrades
DS/ISO 11564+Cor.1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DS/EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
DS/EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

SE-SIS, Quantitative sample concentration

SIS SS-ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
SIS SS-ISO 8761:1990 Work-place air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short- term sampling with direct indication
SIS SS 02 84 22-1990 Stationary source emissions — Determination of the mass concentration of hydrogen chloride — Potentiometric titration.

Lithuanian Standards Office , Quantitative sample concentration

LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
LST EN 1948-1-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
LST EN 13725-2004 Air quality - Determination of odour concentration by dynamic olfactometry
LST EN 13725-2004/AC-2006 Air quality - Determination of odour concentration by dynamic olfactometry
LST EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
LST EN 14791-2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
LST EN 1948-4-2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method

ES-AENOR, Quantitative sample concentration

UNE 53 526 Determination of concentration and specific weight of vulcanized rubber
UNE 22-147-1990 Iron minerals. Determination of moisture absorption in analytical samples. Gravimetry
UNE 84-029-1985 Cosmetic raw materials. Dodecyl triammonium methanol with a concentration of 40%. Alkalinity determination

Taiwan Provincial Standard of the People's Republic of China, Quantitative sample concentration

CNS 5596-1980 Method of Test for Determination of Low Concentrations of Lead in Paints

国家市场监督管理总局、中国国家标准化管理委员会, Quantitative sample concentration

GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method

Professional Standard - Medicine, Quantitative sample concentration

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

ES-UNE, Quantitative sample concentration

UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

PT-IPQ, Quantitative sample concentration

NP 1352-1976 iron ore. Measurement of sample moisture content
NP 1176-1976 Nitric acid used in industry. Determination of the concentration of nitric acid by density measurement

Professional Standard - Textile, Quantitative sample concentration

FZ/T 01068-1999 Sample card for assessing whiteness of textiles
FZ/T 01068-2009 White scale for assessing whiteness of textiles

中国轻工总会, Quantitative sample concentration

ZBW 0416-1989 Sample card for assessing whiteness of textiles

BE-NBN, Quantitative sample concentration

NBN 831-02-1970 Moisture determination of samples for analysis

CH-SNV, Quantitative sample concentration

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

IT-UNI, Quantitative sample concentration

EC 1-2021 UNI EN 13725-2021 Air quality - Determination of odour concentration by dynamic olfactometry
UNI ISO 11665-4:2021 Measurement of radioactivity in the environment -- Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Quantitative sample concentration

ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

TR-TSE, Quantitative sample concentration

TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER

Professional Standard - Agriculture, Quantitative sample concentration

空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quantitative sample concentration

GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
GB/T 27824-2011 Chemicals. Test method of acute inhalation toxicity. Fixed concentration procedure
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)

National Health Commission of the People's Republic of China, Quantitative sample concentration

GB 5009.225-2016 Determination of ethanol concentration in national food safety standard wine

Professional Standard - Meteorology, Quantitative sample concentration

QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

Hebei Provincial Standard of the People's Republic of China, Quantitative sample concentration

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

NL-NEN, Quantitative sample concentration

NEN 2795-1985 Air quality - Ambient air and indoor air Determination of the concentration of methanal (formaldehyde) - Pararosanilin photometric method

International Electrotechnical Commission (IEC), Quantitative sample concentration

IEC 61563:2019 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

CZ-CSN, Quantitative sample concentration

CSN 34 7020-1-1995 Measurement of smoke density of electric cables burning under defined conditions

National Metrological Verification Regulations of the People's Republic of China, Quantitative sample concentration

JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument

CL-INN, Quantitative sample concentration

INDITECNOR 20-13ch-1960 Solid Combustibles: Analytical Measurement of Sample Moisture

ZA-SANS, Quantitative sample concentration

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

VDI - Verein Deutscher Ingenieure, Quantitative sample concentration

VDI 2463 Blatt 1-1997 Messen von Partikeln - Gravimetrische Bestimmung der Massenkonzentration von Partikeln in der Aussenluft - Grundlagen