ZH
RU
ES

How to Measure Particle Size

How to Measure Particle Size, Total:463 items.

In the international standard classification, How to Measure Particle Size involves: Testing of metals, Ferroalloys, Ceramics, Air quality, Metalliferous minerals, Fuels, Road engineering, Materials for the reinforcement of composites, Analytical chemistry, Construction materials, Soil quality. Pedology, Animal feeding stuffs, Particle size analysis. Sieving, Fluid power systems, Aerospace electric equipment and systems, Protection of and in buildings, Ferrous metals, Cork and cork products, Power stations in general, Non-metalliferous minerals, Powder metallurgy, Textile fibres, Fertilizers, Photography, Compressors and pneumatic machines, Special purpose vehicles, Test conditions and procedures in general, Clothes, Water quality, Radiation measurements, Leather technology, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Earthworks. Excavations. Foundation construction. Underground works, Environmental protection, Metrology and measurement in general, Geology. Meteorology. Hydrology, Measurement of fluid flow, Road vehicle systems, Aerospace fluid systems and components, Cereals, pulses and derived products, Equipment for the chemical industry, Products of the textile industry, Linear and angular measurements, Aerospace engines and propulsion systems, Rubber and plastics products, Diagnostic, maintenance and test equipment, Non-ferrous metals, Protection against dangerous goods, Wastes, Raw materials for rubber and plastics, Spices and condiments. Food additives, Food products in general, Prepackaged and prepared foods, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Organic chemicals, Microbiology, Biology. Botany. Zoology.

Taiwan Provincial Standard of the People's Republic of China, How to Measure Particle Size

CNS 11632-1986 13
CNS 12280-1988 56

Japanese Industrial Standards Committee (JISC), How to Measure Particle Size

JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
JIS M 8108:2008 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution
JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
JIS Z 8900-1:2008 Standards particles -- Part 1: Reference particles for calibrating particle size measurements apparatus
JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
JIS M 8108:1992 Chromium, manganese and ferruginous manganese ores -- Sampling and determination of moisture content and size distribution
JIS M 8708:2005 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
JIS H 7313:2007 Superconductivity -- Measurements for bulk high temperature superconductors -- Trapped flux density of large grain oxide superconductors

Korean Agency for Technology and Standards (KATS), How to Measure Particle Size

KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
KS I ISO 7708-2010(2016) Air quality－Particle size fraction definitions for health-related sampling
KS I 2004-2005(2010) Air quality－Particle size fraction definitions for health-related sampling
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS I ISO 7708:2021 Air quality — Particle size fraction definitions for health-related sampling
KS L 6802-2012(2017) Carbon fiber－Determination of size content
KS E 3084-1996(2001) CHROMIUM, MANGANESE AND FERRUGINOUS MANGANESE ORES - SAMPLING AND DETERMINATION OF MOISTURE CONTENT AND SIZE DISTRIBUTION
KS I ISO 11508:2009 Soil quality－Determination of particle density
KS F 2371-2007 Testing method for bulk density of granular insulations
KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS F 2371-1982 Testing method for bulk density of granular insulations
KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS F 2341-2007(2017) Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS E 3007-1991(2001) METHOD OF SAMPLING IRON PYRITES AND SULFUR ORES
KS F 2341-2022 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS I ISO 4405:2005 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS F 2360-2006 Testing method for degree of particle coating of asphalt-aggregate mixture
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I 2005-2005 Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
KS F 2367-2006 Testing method for thickness or height of compacted asphalt paving mixture specimens
KS L ISO 14703-2016(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
KS D ISO 10076-2001(2011) Metallic powde－Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS D ISO 10076:2001 Metallic powde-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
KS D ISO 10076:2013 Metallic powde－Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS I ISO 11277:2005 Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
KS W ISO 5884:2007 Aerospace－Fluid systems and components－Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
KS W ISO 5884-2007(2018) Aerospace－Fluid systems and components－Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

International Organization for Standardization (ISO), How to Measure Particle Size

ISO/TR 7708:1983 Air quality; Particle size fraction definitions for health-related sampling
ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
ISO 11508:2017 Soil quality - Determination of particle density
ISO/TS 4807:2022 Reference materials for particle size measurement — Specification of requirements
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
ISO 20044:2022 Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media
ISO 9096:2003/cor 1:2006 Stationary source emissions - Manual determination of mass concentration of particulate matter; Technical Corrigendum 1
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 5564:1982 Black pepper and white pepper, whole or ground; Determination of piperine content; Spectrophotometric method
ISO 11277:2020 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 4591:1979 Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
ISO 4365:2005 Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density
ISO 11277:1998 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 4365:1985 Liquid flow in open channels; Sediment in streams and canals; Determination of concentration, particle size distribution and relative density
ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 5884:1987 Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
ISO 5884:2018 Aerospace series - Fluid systems and components - Methods for system sampling and measuring the solid particle contamination in hydraulic fluids
ISO 24421:2023 Biotechnology — Minimum requirements for optical signal measurements in photometric methods for biological samples

Association Francaise de Normalisation, How to Measure Particle Size

NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF X43-100*NF ISO 7708:1996 Air quality. Particle size fraction definitions for health-related sampling.
NF EN 12697-28:2020 Mélanges bitumineux - Méthodes d'essai - Partie 28 : préparation des échantillons pour la détermination de la teneur en liant, de la teneur en eau et de la granularité
NF X31-554:1998 Soil quality. Determination of particle density.
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF X43-261:1988 Qualité de l'air - Air des lieux de travail - Prélèvement à poste fixe et mesurage de la pollution particulaire totale.
NF ISO 2067:2020 Granulés de liège, liège concassé et liège trituré - Échantillonnage pour la détermination de la teneur en humidité
NF B57-014*NF ISO 2067:2020 Granulated cork, broken cork and crushed cork - Sampling for the determination of moisture content
NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
NF X43-283-2*NF EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency
NF X43-283-1*NF EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1 : general requirements
NF X43-283-5*NF EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF EN 13205-6:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 6 : essais de manipulation et de transport
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
NF X43-283-6*NF EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6 : transport and handling tests
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF ISO 20044:2023 Mesurage de la radioactivité dans l'environnement - Air : particules d'aérosol - Méthode d'essai utilisant l'échantillonnage par un média filtrant
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF X45-405:1996 Granular filter media. Test methods. Measurement of the cake density of a filter aid.
NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
NF EN 13205-2:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 2 : essai de performances en laboratoire par détermination par l'...
NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF G07-108:1986 Textiles. Determination of the heat retention of materials by measurement of the thickness and mass of specimens.
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF R19-501-9:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 9 : particle sizing and counting by automatic light extinction particle counter.
NF R19-501-6:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 6 : particle mass determination by gravimetric analysis.
NF EN 17289-3:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 3 : méthode par sédimentation
NF X11-683:1981
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
NF X31-559*NF ISO 11277:2020 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
NF EN 17289-2:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 2 : méthode par calcul
NF P94-057:1992 Soils investingation and testing. Granulometric analysis. Hydrometer method.

KR-KS, How to Measure Particle Size

KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS I ISO 7708-2021 Air quality — Particle size fraction definitions for health-related sampling
KS A 0095-2007(2022) Determination of particle size distribution by the weight of sedimentation in liquid
KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS L ISO 14703-2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders

RU-GOST R, How to Measure Particle Size

GOST R ISO 7708-2006 Air quality. Particle size fraction definitions for health-related sampling
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST 26573.3-1985 Premixes. Method for determination of particle size
GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
GOST 17495-1980 Iron ores, concentrates, agglomerates and pellets. Methods of sampling and sample preparation for size determination
GOST 21216.4-1993 Clay raw materials. Method for determination of coarse-grained inclusions
GOST 25498-1982 Manganese ores concentrates and agglomerates. Methods of sampling and sample preparation for the determination of the grain composition
GOST 938.15-1970 Leather. Method of measuring thickness of samples and thicknes of leather in the standard point
GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST R 8.775-2011 State system for ensuring the uniformity of measurements. Disperse composition of gas atmospheres. Determination of nano particle size by differential electrical mobility analysis for aerosol particles
GOST R ISO 13067-2016 State system for insuring the uniformity of measurements. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
GOST 30483-1997 Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to Measure Particle Size

GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
GB 2007.7-1987 General rules for sampling and sample preparation of bulk mineral products Particle size determination method - manual sieving method
GB/T 2007.7-1987 General rules for the sampling and sample preparation of minerals in bulk--The method for determination of size by manual sieving
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 6524-2003 Metallic powders-Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
GB/T 21865-2008 Standard test methods for determining average grain size using semiautomatic and automatic image analysis

国家市场监督管理总局、中国国家标准化管理委员会, How to Measure Particle Size

GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density

AENOR, How to Measure Particle Size

UNE 77213:1997 AIR QUALITY. PARTICLE SIZE FRACTION DEFINITIONS FOR HEALTH-RELATED SAMPLING.
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE 7295:1976 DETERMINATION OF CONTENT, MAXIMUM SIZE AND THICK AGGREGATE GRANULOMETRIC MODULUS IN FRESH CONCRETE.
UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.

British Standards Institution (BSI), How to Measure Particle Size

BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS 3406-1:1986 Methods for determination of particle size distribution - Guide to powder sampling
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
PD ISO/TS 4807:2022 Reference materials for particle size measurement. Specification of requirements
BS EN 13205-1:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. General requirements
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
BS ISO 2067:2019 Granulated cork, broken cork and crushed cork. Sampling for the determination of moisture content
BS EN 13205-2:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency
BS EN 13205-5:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces
BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
BS ISO 3085:2019 Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
BS ISO 10505:2009 Photography - Root mean square granularity of photographic films - Method of measurement
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS ISO 4365:2005 Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density
BS ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter
BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis
BS EN 22313:1992 Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution
BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
BS 3908-2:1967 Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)
BS 3908-6:1971 Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis
BS ISO 12743:2018 Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
BS 5711-5:1979 Methods of sampling and test for glycerol - Determination of alkalinity or acidity: volumetric method
BS ISO 12743:2007 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
BS ISO 24421:2023 Biotechnology. Minimum requirements for optical signal measurements in photometric methods for biological samples

Professional Standard - Ferrous Metallurgy, How to Measure Particle Size

YB/T 4547-2016 The technical specification of online automatic sampling, sample preparation, particle size analysis and the determination of mechanical strength for coke

Standard Association of Australia （SAA）, How to Measure Particle Size

AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 1141.11.1:2009/Amdt 1:2011
AS 1141.19:1998 Methods for sampling and testing aggregates - Fine particle size distribution in road materials by sieving and decantation
AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS 1141.11.2:2019 Methods for sampling and testing aggregates, Method 11.2: Particle size distribution for vision sizing systems
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
AS 1141.6.1:2000 Methods for sampling and testing aggregates - Particle density and water absorption of coarse aggregate - Weighing-in-water method
AS 4323.2:1995 Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 1141.6.2:1996 Methods for sampling and testing of aggregates - Particle density and water absorption of coarse aggregate - Pycnometer method
AS/NZS 3580.10.2:2013
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS/NZS 3580.9.15:2014
AS/NZS 3580.9.7:2009
AS/NZS 3580.9.14:2013
AS/NZS 3580.9.6:2015
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS 1141.19:2018 Methods for sampling and testing aggregates, Method 19: Fine particle size distribution in road materials by sieving and decantation
AS 3586.4:1995 Ferroalloys - Sampling - Determination of quality variation, precision and bias
AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
AS 1141.19:1998(R2013)
AS 2800:1985 Ambient air - Determination of particulate lead - High volume sampler gravimetric collection - Flame atomic absorption spectrometric method
AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser

BR-ABNT, How to Measure Particle Size

PT-IPQ, How to Measure Particle Size

NP 605-1986
NP 606-1986
NP 1352-1976
NP 1294-1976
NP ISO 4112:2001 Cereals and pulses Guidance on measurement of the temperature of grain stored in bulk

工业和信息化部, How to Measure Particle Size

YB/T 4605-2017 Technical specifications for online automatic sampling, sample preparation, particle size analysis and drum strength determination of sinter
YB/T 4849-2020 Technical specifications for online automatic sampling, sample preparation, particle size analysis and mechanical strength determination of pellets

HU-MSZT, How to Measure Particle Size

German Institute for Standardization, How to Measure Particle Size

DIN ISO 7708:1996 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014
DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN ISO 11508:2002 Soil quality - Determination of particle density (ISO 11508:1998)
DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN 54408:2007 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
DIN ISO 13067:2015 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2011)
DIN EN ISO 11508:2018 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version CEN/TS 16450:2013
DIN ISO 10076:2001 Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991)
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 17289-3:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
DIN EN 17289-2:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method; German version EN 17289-2:2020

YU-JUS, How to Measure Particle Size

JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)

CEN - European Committee for Standardization, How to Measure Particle Size

PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)

European Committee for Standardization (CEN), How to Measure Particle Size

EN ISO 11508:2017 Soil quality - Determination of particle density
PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN ISO 11508:2014 Soil quality - Determination of particle density
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
EN 22313:1992 Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of Recovery

Danish Standards Foundation, How to Measure Particle Size

DS/ISO 11508:1999 Soil quality - Determination of particle density
DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
DS/EN 17289-2:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 2: Calculation method
DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation

未注明发布机构, How to Measure Particle Size

BS 3406-1:1986(1999) Methods for Determination of particle size distribution — Part 1 : Guide to powder sampling
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 14703:2008(2009) Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications

Association of German Mechanical Engineers, How to Measure Particle Size

VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
VDI 2066 Blatt 8-1995 Measurement of particles - Dust measurement in flowing gases - Measurement of smoke number in furnaces designed for EL-type fuel oil
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers
VDI 3869 Blatt 4-2012 Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis
VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy

CZ-CSN, How to Measure Particle Size

CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
CSN 72 1181-1967 Determination of grains with different unit wight in aggregates
CSN 44 1812 Z1-1996

AT-ON, How to Measure Particle Size

ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements
ONORM M 5861-2-1994 Manual determination of particle concentrations in fluid gases - Gravimetrie method - Special requirements regarding measurement techniques
ONORM EN 22313-1993 Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery

VE-FONDONORMA, How to Measure Particle Size

CH-SNV, How to Measure Particle Size

SNV 24700-1937

Professional Standard - Aviation, How to Measure Particle Size

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

Professional Standard - Machinery, How to Measure Particle Size

JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal

NO-SN, How to Measure Particle Size

NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

IT-UNI, How to Measure Particle Size

UNI 4871-1961

Professional Standard - Electricity, How to Measure Particle Size

DL/T 432-2007 Determination of particulate contamination in oil
DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants

Group Standards of the People's Republic of China, How to Measure Particle Size

T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/AQSPMK 004-2023 Color standard card for chromaticity measurement of fiber color masterbatch
T/AQSPMK 0004-2023 Color standard card for chromaticity measurement of fiber color masterbatch
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

American Society for Testing and Materials (ASTM), How to Measure Particle Size

ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM D5861-07 Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM D5861-95 Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM F577-03 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-03e1 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-83(1997) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM UOP856-85 Particle Size Distribution of Powders by Laser Light Scattering
ASTM D5861-07(2017) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM E1037-21 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM F577-03(2009) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E2776-18 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM E2776-20 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D1813-00(2005) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-00 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-00(2010) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM D421-85(2002) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D421-85(1998) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM E1382-97 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1382-97(2004) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM E1382-97(2010) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to Measure Particle Size

ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks
ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
ASHRAE AC-02-2-3-2002 Surface Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements

Professional Standard - Coal, How to Measure Particle Size

MT 422-1996 Coal mine dust particle size distribution determination method (mass method)

ES-UNE, How to Measure Particle Size

ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-EN 17289-2:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
UNE-EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method

农业农村部, How to Measure Particle Size

NY/T 3036-2016 Determination of moisture content, particle size and fineness of fertilizers and soil conditioners

GOSTR, How to Measure Particle Size

GOST R 57925-2017 Ceramic composites. Sample preparation for the determination of particle size distribution of ceramic powders

CL-INN, How to Measure Particle Size

Professional Standard - Automobile, How to Measure Particle Size

QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system

VN-TCVN, How to Measure Particle Size

TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
TCVN 5052-2-2009 Hardmetals.Metallographic determination of microstructure.Part 2: Measurement of WC grain size

PL-PKN, How to Measure Particle Size

PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
PN-EN 17289-2-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 2: Calculation method
PN-EN ISO 4499-2-2021-02 E Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size (ISO 4499-2:2020)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to Measure Particle Size

GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

Lithuanian Standards Office , How to Measure Particle Size

LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications

Indonesia Standards, How to Measure Particle Size

SNI 19-7119.3-2005 Ambient atmospheres - Part 3: Test methods of total suspended particle by gravimetry using high volume air sampler (HVAS) equipment
SNI 7117.13-2009
SNI ISO 14703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders

SAE - SAE International, How to Measure Particle Size

SAE ARP5376A-2003 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
SAE ARP5376-1998 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

Society of Automotive Engineers (SAE), How to Measure Particle Size

SAE ARP5376C-2021 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
SAE AIR6241A-2020 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particle Emissions from Aircraft Turbine Engines
SAE ARP5376B-2010 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines
SAE AIR6241-2013 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particle Emissions from Aircraft Turbine Engines

IN-BIS, How to Measure Particle Size

Hebei Provincial Standard of the People's Republic of China, How to Measure Particle Size

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Occupational Health Standard of the People's Republic of China, How to Measure Particle Size

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration

BELST, How to Measure Particle Size

STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests

PH-BPS, How to Measure Particle Size

PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy

ZA-SANS, How to Measure Particle Size

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
SANS 2313:2008 Textile fabrics - Determination of the recovery from creasing of the horizontally folded specimen by measuring the angle of recovery

ES-AENOR, How to Measure Particle Size

UNE 22-147-1990

Shandong Provincial Standard of the People's Republic of China, How to Measure Particle Size

DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

CO-ICONTEC, How to Measure Particle Size

Professional Standard - Ocean, How to Measure Particle Size

HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry

SE-SIS, How to Measure Particle Size

SIS SS-ISO 5884:1989 Aerospace — Fluid systems and compo- nents — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

RO-ASRO, How to Measure Particle Size

STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids