ZH
RU
ES
how to measure z
how to measure z, Total:497 items.
In the international standard classification, how to measure z involves: Electromechanical components for electronic and telecommunications equipment, Construction industry, Wood-based panels, Optics and optical measurements, Products of the textile industry, Radiation measurements, Measurement of fluid flow, Laboratory medicine, Materials for the reinforcement of composites, Refractories, Equipment for entertainment, Lamps and related equipment, Electricity. Magnetism. Electrical and magnetic measurements, Farming and forestry, Measurement of time, velocity, acceleration, angular velocity, Glass, Applications of information technology, Metalliferous minerals, Coals, Audio, video and audiovisual engineering, Paper and board, General methods of tests and analysis for food products, Soil quality. Pedology, Leather technology, Air quality, Extraction and processing of petroleum and natural gas, Fuels, Internal combustion engines for road vehicles, Analytical chemistry, Vocabularies, Open systems interconnection (OSI), Measurement of volume, mass, density, viscosity, Plastics, Quality, Construction materials, Paint ingredients, Food products in general, Cellular materials, Medical sciences and health care facilities in general, Mining and quarrying, Products of the chemical industry, Wood, sawlogs and sawn timber, Biology. Botany. Zoology, Inorganic chemicals, Medical equipment, Water quality, Physics. Chemistry, Nuclear energy engineering, Radiation protection, Natural gas, Veterinary medicine, Non-ferrous metals, Packaging materials and accessories, Testing of metals, Tea. Coffee. Cocoa, Paints and varnishes, Road engineering, Crude petroleum, Microbiology, Organic chemicals, Test conditions and procedures in general, Materials for aerospace construction, Milk and milk products, Linear and angular measurements, Protection against fire, Rubber, Ferroalloys, Aircraft and space vehicles in general, Installations in buildings, Raw materials for rubber and plastics, Non-metalliferous minerals, Powder metallurgy.
IN-BIS, how to measure z
ES-AENOR, how to measure z
CENELEC - European Committee for Electrotechnical Standardization, how to measure z
- EN 60068-2-50:1999 Environmental Testing Part 2: Tests - Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens
- EN 60068-2-51:1999 Environmental Testing Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens
- EN IEC 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps (Incorporates Amendment A1: 2018)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, how to measure z
- GB/T 9393-2012 STZ3 type power supply connector for electronic measurement instrument
- GB/T 9340-2009 Methods for color measurement of fluorescent specimens
- GB/T 9340-2001 Method for relative measurement of the colour of fluorescent samples
- GB/T 12626.3-1990 Hard fibreboard--Sampling and measurement of test pieces
- GB/T 31947-2015 Iron ores.Determination of mercury content.Solid sampling and direct mercury analysis method
- GB/T 31948-2015 Chromium ores.Determination of mercury content.Solid sampling and direct mercury analysis method
- GB/T 31949-2015 Manganese ores.Determination of mercury content.Solid sampling and direct mercury analysis method
- GB/T 19702-2005 In vitro diagnostic medical devices.Measurement of quantities in samples of biological origin.Presentation of reference measurement procedures
- GB 4581.3-1984 Alunite ores--Determination of hygroscopic moisture content in analytical samples--Gravimetric method
- GB/T 33681-2017 High-throughput gene sequencing sample pretreatment method part 1: Animal tissue sample pretreatment
- GB/T 8303-2002 Tea--Preparation of ground sample and determinaton of dry matter content
- GB/T 17674-2012 Determination of nitrogen in crude oil by boat-inlet chemiluminescence
- GB/T 24220-2009 Chromium ores.Determination of hygroscopic moisture content in analytical samples.Gravimetric method
- GB/T 8303-2013 Tea.Preparation of ground sample and determination of dry matter content
- GB/T 42843.1-2023 Micro-bubble technology measurement sampling and sample preparation Part 1: Ultra-fine bubble water dispersion system
- GB/T 6730.3-1986 Methods for chemical analysis of iron ores--The gravimetric method for the determination of hygroscopic moisture content in analytical samples
- GB/T 4078-2008 Dimension of sample planchets、vials and test tubes for radioactivity measurement
- GB/T 12626.3-2009 Hard fibreboard.Part 3:Sampling and measurements of test pieces
- GB/T 31949-2015(英文版) Manganese ores—Determination of mercury content—Solid sampling and direct mercury analysis method
- GB/T 31948-2015(英文版) Chromium ores—Determination of mercury content—Solid sampling and direct mercury analysis method
- GB/T 3658-2008 Methods of measurement of a.c.magnetic properties of magnetically soft materials
Korean Agency for Technology and Standards (KATS), how to measure z
- KS C 0289-1997(2012) Basic environmental testing procedures Part 2 : Tests Tests Z/BFc : Combined dry heat/ vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
- KS K 0514-2017 Measuring method for weight of cloth: small specimen method
- KS B ISO 4364:2014 Measurement of liquid flow in open channels — Bed material sampling
- KS B ISO 4364:2004 Measurement of liquid flow in open channels-Bed material sampling
- KS K 0514-2022 Measuring method for weight of cloth: Small specimen method
- KS E 3906-2017 Copper scraps for smelting－Methods for sampling, sample preparation and determination of moisture content
- KS K 0515-2022 Measuring method for weight of cloth: Full width specimen method
- KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
- KS E 3906-2017(2022) Copper scraps for smelting－Methods for sampling, sample preparation and determination of moisture content
- KS M ISO 186:2004 Paper and board－Sampling to determine average quality
- KS E ISO 9033-2003(2019)
- KS B ISO 4364:2020 Measurement of liquid flow in open channels —Bed material sampling
- KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
- KS K 0515-2017 Measuring method for weight of cloth：Full width specimen method
- KS K 0515-1986 Measuring method for weight of cloth：Full width specimen method
- KS A ISO 18589-2:2017 Measurement of radioactivity in the environment－Soil－Part 2：Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
- KS A 0080-2007 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
- KS K 0514-2011 Measuring method for weight of cloth: small specimen method
- KS E 3008-1996(2021) BLISTER COPPER - METHODS FOR SAMPLING AND DETERMINATION OF MOISTURE CONTENT
- KS E 3007-1991(2001) METHOD OF SAMPLING IRON PYRITES AND SULFUR ORES
- KS A ISO 18589-2:2012 Measurement of radioactivity in the environment-Soil-Part 2:Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
- KS K 0515-2011 Measuring method for weight of cloth：Full width specimen method
- KS E 3008-1996 Blister copper -Methods for sampling and determination of imoisture content
- KS E 3008-1996(2016) BLISTER COPPER - METHODS FOR SAMPLING AND DETERMINATION OF MOISTURE CONTENT
- KS I 2005-2005 Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
- KS A ISO 18589-2-2017(2022) Measurement of radioactivity in the environment－Soil－Part 2：Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
- KS E ISO 8557-2003(2013) Aluminium ores－Determination of hydroscopic moisture in analytical samples－Gravimetric method
- KS E ISO 331-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
- KS E ISO 310:2003 Manganese ores and concentrates－Determination of hygroscopic moisture content in analytical samples－Gravimetric method
- KS A 0080-2007(2012) Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
- KS A 0080-1982 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
- KS E ISO 8557:2003 Aluminium ores－Determination of hydroscopic moisture in analytical samples－Gravimetric method
- KS I ISO 14507-2009(2019) Soil quality－Pretreatment of samples for determination of organic contaminants
- KS I ISO 15713:2007 Stationary source emissions－Sampling and determination of gaseous fluoride content
- KS E ISO 331:2002 Coal－Determination of moisture in the analysis sample－Direct gravimetric method
- KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
- KS I ISO 15713-2007(2017) Stationary source emissions－Sampling and determination of gaseous fluoride content
- KS E 3047-2011(2016) Method for sampling and method of determination of moisture content of garnierite nickel ores
- KS A ISO 7503-2:2021 Measurement of radioactivity ―Measurement and evaluation of surface contamination ―Part 2: Test method using wipe-test samples
- KS I ISO 23893-1:2009 Water quality－Biochemical and physiological measurements on fish－Part 1：Sampling of fish, handling and preservation of samples
- KS Q ISO 3951-3:2012 Sampling procedures for inspection by variables-Part 3:Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- KS Q ISO 3951-3:2013 Sampling procedures for inspection by variables-Part 3:Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- KS P ISO 15193:2010 In vitro diagnostic medical devices-Measurement of quantities in samples of biological origin-Requirements for content and presentation of reference measurement procedures
- KS P ISO 15193:2014 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures
SE-SIS, how to measure z
U.S. Military Regulations and Norms, how to measure z
HU-MSZT, how to measure z
British Standards Institution (BSI), how to measure z
- BS 5964-2:1996 Building setting out and measurement. Measuring stations and targets
- BS ISO 3085:2019 Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
- BS 5964-3:1996 Building setting out and measurement. Check-lists for the procurement of surveys and measurement services
- BS EN IEC 62554:2011+A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps
- BS EN 12823-1:2014 Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-E-retinol and 13-Z-retinol
- BS ISO 18589-2:2015 Measurement of radioactivity in the environment. Soil. Guidance for the selection of the sampling strategy, sampling and pretreatment of samples
- BS ISO 18589-2:2008 Measurement of radioactivity in the environment - Soil - Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- BS ISO 18589-2:2022 Measurement of radioactivity in the environment. Soil - Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- BS ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
- BS EN ISO 186:2002 Paper and board - Sampling to determine average quality
- BS 6953:1988 Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
- BS 5964-1:1990 Building setting out and measurement. Methods of measuring, planning and organization and acceptance criteria
- BS EN 12286:1999(2001) In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
- BS EN 12286:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
- BS EN 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps
- 22/30433853 DC BS EN ISO 19156. Geographic information. Observations, measurements and samples
- BS ISO 23893-1:2007 Water quality - Biochemical and physiological measurements on fish - Sampling of fish, handling and preservation of samples
- BS ISO 20298-1:2018 Fine bubble technology. Sampling and sample preparation for measurement - Ultrafine bubble dispersion in water
- BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
- BS EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination
- 21/30432271 DC BS ISO 18400-301. Soil quality. Sampling - Part 301. Sampling- and on site semi-quantitative determinations of volatiles in field investigations
- BS EN 22313:1992 Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
- BS 6075-3:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of iron content
- BS 3908-2:1967 Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)
- BS 3908-6:1971 Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)
- 21/30441990 DC BS ISO 18589-2. Measurement of radioactivity in the environment. Soil. Part 2. Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- BS EN ISO 17511:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials
- BS 6070-5:1981 Methods of sampling and test for sodium carbonate for industrial use. Determination of sulphate content
- BS 6075-9:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of calcium and magnesium contents
- BS ISO 5068-2:2007 Brown coals and lignites - Determination of moisture content - Indirect gravimetric method for moisture in the analysis sample
- BS EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
- BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete
- BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
- BS 5711-18:1979 Methods of sampling and test for glycerol - Detection of sugars
- BS 5272:1975 Method for simultaneous routine determination of the water contents of a batch of dried milk samples
- BS ISO 15713:2006 Stationary source emissions - Sampling and determination of gaseous fluoride content
- BS 6075-6:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of carbonate content
- BS 6075-8:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of sulphate content
- BS EN ISO 2313-1:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the horizontally folded specimen
- BS EN ISO 2313-2:2021 Textiles. Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery. Method of the vertically folded specimen
- BS ISO 7503-2:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination. Test method using wipe-test samples
German Institute for Standardization, how to measure z
- DIN EN ISO 19156:2022-02 Geographic information - Observations, measurements and samples (ISO/DIS 19156:2022); English version prEN ISO 19156:2022 / Note: Date of issue 2022-01-14*Intended as replacement for DIN EN ISO 19156 (2013-10).
- DIN 18710-3:2010-09 Engineering survey - Part 3: Setting out / Note: Applies in conjunction with DIN 18710-1 (2010-09).
- DIN EN ISO 13632:2012-10 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012); German version EN ISO 13632:2012
- DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
- DIN ISO 18589-2:2009 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2007); English version of DIN ISO 18589-2:2009-02
- DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
- DIN CEN/TS 12633:2014-12*DIN SPEC 5277:2014-12 Method of polishing specimens prior to the measurement of slip and skid resistance; German version CEN/TS 12633:2014
- DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
- DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
- DIN ISO 18589-2:2015 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2015)
- DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
- DIN EN ISO 16000-11:2006-06 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); German version EN ISO 16000-11:2006
PT-IPQ, how to measure z
- NP EN 325-2002 Wood-based panels Determination of dimensions of test pieces
- NP EN 12286-2000 In vitro diagnostic medical devices Measurement of quantities in samples of boilogical origin Presentation of reference measurement procedures
- NP 1352-1976
American Society for Testing and Materials (ASTM), how to measure z
- ASTM E991-98 Standard Practice for Color Measurement of Fluorescent Specimens
- ASTM F1932/F1932M-98(2018) Standard Test Method for Measuring Sleeping Bag Loft
- ASTM D7775-16 Standard Guide for Measurements on Small Graphite Specimens
- ASTM D7775-21 Standard Guide for Measurements on Small Graphite Specimens
- ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D1071-83(2003) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D1813-00(2005) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1813-00 Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1813-00(2010) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D5115-90(2004) Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
- ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
- ASTM E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM D3964-04 Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
- ASTM C183/C183M-23 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
- ASTM E1728-02 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM E775-87(2004) Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
- ASTM D3964-80(1998) Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D3964-10 Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D8255-19 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens
- ASTM D3964-10(2020) Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM D3964-10(2015) Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM C183-02 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
- ASTM E1644-04 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM D5842-04 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
- ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
Japanese Industrial Standards Committee (JISC), how to measure z
- JIS Z 4401:1993 Planchets used in radiation measurement instruments
- JIS Z 4401:2006 Planchets used in radiation measurement instruments
- JIS P 8110:2006 Paper and board -- Sampling to determine average quality
- JIS M 8708:2005 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
- JIS M 8082:1999 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content
- JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
- JIS M 8102:1993 Blister copper -- Methods for sampling and determination of moisture content
- JIS M 8082 AMD 1:2015 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content (Amendment 1)
- JIS B 8745-1:2022 Fine bubble technology -- Sampling and sample preparation for measurement -- Part 1: Ultrafine bubble dispersion in water
- JIS P 8110:2001 Paper and board -- Sampling to determine average quality
- JIS Z 4504-2:2023 Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 2: Test method using wipe-test samples
- JIS G 2403:2003 Methods for sampling, preparation and determination of moisture content of aluminium dross
- JIS M 8108:2008 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution
- JIS M 8082:1976 Method of sampling and methods of determination of copper content and moisture of copper scraps for smelting
CH-SNV, how to measure z
Professional Standard - Petroleum, how to measure z
- SY/T 6528-2002 Test method of the rock dielectric constant
- SY 6528-2002 Measuring method of rock sample dielectric constant
- SY/T 6712-2008 Laboratory measurement method of complex resistivity of core sample
- SY/T 6351-2012 Specification for measurement of rock acoustic properties in laboratory
- SY 6351-2012 Specification for laboratory measurements of acoustic properties of rock samples
- SY 6712-2008 Laboratory measurement method of complex resistivity of annual rock sample
- SY/T 6352-2013 Specification for measurement of rock electrochemistry in laboratory
- SY/T 6490-2014 Specification for measurement of rock NMR parameter in laboratory
- SY/T 6490-2007 Specification for normalization measurement of core NMR parameter in laboratory
- SY/T 6490-2000 Specifications for Laboratory Measurement of Rock Sample NMR Parameters
- SY 6490-2014 Specifications for Laboratory Measurement of Rock Sample NMR Parameters
- SY 6352-2013 Specifications for Laboratory Measurement of Electrochemical Parameters of Rock Samples
- SY/T 5252-2016 Specification for measurement of rock natural gamma spectrometry in laboratory
- SY 5252-2016 Laboratory measurement specification for natural gamma ray spectroscopy of rock samples
ZA-SANS, how to measure z
- SANS 6174:2004 Fibreboard - Measurement of dimensions of test specimens
- SANS 5988:2004 Retention of preservative in timber (sample method)
- SANS 5983:2000 Preparation of test specimens for moisture content determination in timber and timber products
American National Standards Institute （ANSI), how to measure z
International Electrotechnical Commission (IEC), how to measure z
Association Francaise de Normalisation, how to measure z
- NF C71-554*NF EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps
- FD X10-346:1996 Mesure de débit des liquides dans les canaux découverts - Échantillonnage des matériaux du lit
- NF C71-554/A1*NF EN IEC 62554/A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps
- NF EN 62554:2012 Préparation des échantillons en vue de la mesure du niveau de mercure dans les lampes fluorescentes
- NF EN IEC 62554/A1:2018 Préparation des échantillons en vue de la mesure du niveau de mercure dans les lampes fluorescentes
- NF X43-014:2017 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis
- NF Q03-009*NF EN ISO 186:2002 Paper and board - Sampling to determine average quality.
- NF Q03-009:1996 Paper and board. Sampling to determine average quality.
- NF EN 12823-1:2014 Produits alimentaires - Détermination de le teneur en vitamine A par chromatographie liquide haute performance - Partie 1 : dosage du tout-E-rétinol et du 13-Z-rétinol
- NF EN ISO 13632:2012 Liants pour peintures et vernis - Colophane - Échantillonnage et préparation des échantillons pour le mesurage de la couleur
- NF V03-130-1*NF EN 12823-1:2014 Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1 : measurement of all-E-retinol and 13-Z-retinol
- NF M60-790-2*NF EN ISO 18589-2:2018 Measurement of radioactivity in the environment - Soil - Part 2 : Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- NF ISO 18589-2:2023 Mesurage de la radioactivité dans l'environnement - Sol - Partie 2 : lignes directrices pour la sélection de la stratégie d'échantillonnage, l'échantillonnage et le prétraitement des échantillons
- NF EN 12127:1998 Textiles - Étoffes - Détermination de la masse surfacique sur de petits échantillons.
- NF V03-009-2:2002 Produits alimentaires - Mesure de la radioactivité dans les denrées alimentaires - Partie 2 : guide pour la préparation des échantillons de denrées alimentaires - Obtention d'un échantillon pour essai
- NF X31-115:2001 Soil quality - Sampling and storage of soil samples in view of determination of mineral nitrogen on fresh soil.
- NF X10-340*NF ISO 9195:1992 Liquid flow measurement in open channels. Sampling and analysis of gravel-bed material.
- NF T20-241:1982 Liquid chlorine for industrial use. Method of sampling (for determining only the volumetric chlorine content).
- NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
- NF M60-760:2001 Nuclear energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment.
- NF M60-790-2:2008 Measurements of radioactivity in the environment - Soil - Part 2 : guidance for the selection of the sampling strategy, sampling and pre-treatment of samples.
- NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
- NF X41-569:2014 Wood preservatives - Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water
- NF X50-902:2013 Human Resources policy for the promotion of diversity and the prevention of discrimination - Mesure of the effects of a diversity policy
- NF G07-170*NF EN 12127:1998 Textiles. Fabrics. Determination of mass per unit area using small samples.
- NF M60-702*NF ISO 7503-2:2017 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2 : test method using wipe-test samples
- NF ISO 7503-2:2017 Mesurage de la radioactivité - Mesurage et évaluation de la contamination de surface - Partie 2 : méthode d'essai utilisant des échantillons d'essai de frottis
- NF G07-108:1986 Textiles. Determination of the heat retention of materials by measurement of the thickness and mass of specimens.
- XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
- NF X43-261:1988 Qualité de l'air - Air des lieux de travail - Prélèvement à poste fixe et mesurage de la pollution particulaire totale.
- NF X43-264:2002 Air quality - Workplace air - Sampling and determination of aldehydes.
- NF X43-306*NF ISO 15713:2006 Stationary source emissions - Sampling and determination of gaseous fluoride content.
- NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
- NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
- NF ISO 15713:2006 Émissions de sources fixes - Échantillonnage et détermination de la teneur en fluorure gazeux
- NF X43-329:2003 Émissions de sources fixes - Prélèvement et mesurage d'hydrocarbures aromatiques polycycliques à l'émission
- NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
- NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
- NF M60-760:2017 Nuclear Energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment
- FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
International Organization for Standardization (ISO), how to measure z
- ISO 4364:1977 Liquid flow measurement in open channels; Bed material sampling
- ISO 19156:2023 Geographic information — Observations, measurements and samples
- ISO 186:1977 Paper and board — Sampling for testing
- ISO 186:2002 Paper and board - Sampling to determine average quality
- ISO 186:1985 Paper and board; Sampling to determine average quality
- ISO 186:1994 Paper and board - Sampling to determine average quality
- ISO/DIS 18400-301 Soil quality — Sampling — Part 301: Sampling- and on site semi-quantitative determinations of volatiles in field investigations
- ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
- ISO/CD 18239-1:1976 Iron ores — Determination of loss on ignition — Part 1: Single micro sample TGA
- ISO 18589-2:2015 "Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples"
- ISO 18589-2:2007 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- ISO 18589-2:2022 Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- ISO/FDIS 16000-11:2023 Indoor air — Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens
- ISO 331:1983 Coal; determination of moisture in the analysis sample; direct gravimetric method
- ISO 4364:1997/Cor 1:2000 Measurement of liquid flow in open channels - Bed material sampling
- ISO 9195:1992 Liquid flow measurement in open channels; sampling and analysis of gravel-bed material
- ISO 310:1992 Manganese ores and concentrates; determination of hygroscopic moisture content in analytical samples; gravimetric method
- ISO/FDIS 18400-301:2023 Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations
- ISO 18400-301:2011 Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations
- ISO 18400-301:2023 Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations
- ISO 20298-1:2018 Fine bubble technology — Sampling and sample preparation for measurement — Part 1: Ultrafine bubble dispersion in water
- ISO 310:1981 Manganese ores — Determination of hygroscopic moisture content in analytical samples — Gravimetric method
- ISO 6129:1981 Chromium ores; Determination of hygroscopic moisture content in analytical samples; Gravimetric method
- ISO 5068-2:2007 Brown coals and lignites - Determination of moisture content - Part 2: Indirect gravimetric method for moisture in the analysis sample
- ISO 15713:2006 Stationary source emissions - Sampling and determination of gaseous fluoride content
- ISO 8557:1985 Aluminium ores; Determination of hygroscopic moisture in analytical samples; Gravimetric method
- ISO 23893-1:2007 Water quality - Biochemical and physiological measurements on fish - Part 1: Sampling of fish, handling and preservation of samples
- ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures
- ISO 15193:2002 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
- ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen
- ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen
- ISO 1552:1976 Liquid chlorine for industrial use; Method of sampling (for determining only the volumetric chlorine content)
Professional Standard - Electricity, how to measure z
- DL/T 732-2000 Optical-electrical/acquisition used in electrical energy meter calibrating
GOSTR, how to measure z
- GOST 6859-1972 Apparatus for liquids sampling and measuring. Specifications
- GOST 27589-2020 Coke. Method for determination of moisture content in analytical sample
RO-ASRO, how to measure z
- STAS 9824/3-1974 Earth measurements SETTING OUT OF PUBLIC ROADS
- STAS 9824/6-1985 Land surveys SETTING OUT OF HYDRAULIC POWER PLANT STRUCTURES
- STAS 4813/2-1973 BAUXITE Detenninalion of moisture content of laboratory sample
- STAS 9821/0-1974 Land surveys SETTING OUT OF THE BUILDINGS General provisions
- STAS 9824/4-1983 Land surveys SETTING OUT OF ABOVE- GROUND ART WORKS
- STAS 9824/8-1976 Land surveys SETTING OUT OF HIGH VOLTA GE OVERHEAD ELECTRICAL LINES
- STAS 106-1988 PAPER AND BOARD Sampling in view of testings and rules for quality checking up
- SR ISO 331:1994 Coal. Determination of moisture in the analysis sample. Direct gravimetric method
- STAS 2213/2-1984 SWEETS Rules for quality control and preparation ol samples for testing
- SR ISO 310:1995 Manganese ores and concentrates - Determination of hygroscopic moisture content in analytical samples - Gravimetric method
- STAS SR ISO 8557:1994 Aluminium ores - Determination of hygroscopic moisture in analytical samples - Gravimetric method
- STAS 1574/20-1975 IRON ORES AND CONCENTRATES Determination of moisture content of laboratory sample
Hunan Provincial Standard of the People's Republic of China, how to measure z
- DB43/T 994-2015 Sampling procedures for the determination of capsaicin content
- DB43/T 993-2015 Sampling procedures for determination of capsanthin content
Group Standards of the People's Republic of China, how to measure z
- T/NAIA 0190-2023 Microsampler Evaluation Test Specification
- T/CIMA 0027-2021 Specification for inspection of AC sampling and measuring devices
- T/SXHK 003-2019 Quality inspection requirements for product design models and 3D drawings
- T/NAIA 087-2021 Determination of Mercury Content in Coal-based Liquid Oil by Direct Sampling Method
Standard Association of Australia （SAA）, how to measure z
- AS/NZS ISO 19156:2023 Geographic information — Observations, measurements and samples
- AS 1141.15:1999 Methods for sampling and testing aggregates - Flakiness index
- AS 2806.7:2004 Aluminium ores - Sampling - Determination of quality variation (ISO 6139:1993, MOD)
- AS 2862.1:2008 Copper, lead, zinc and nickel concentrates - Sampling - Sampling procedures for determination of metal and moisture content
- AS 2282.2:1999 Methods for testing flexible cellular polyurethane - Measurement of dimensions of test specimens
- AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
- AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
- AS 4459.2:1999 Methods of sampling and testing ceramic tiles - Determination of dimensions and surface quality
- AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
- AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
- AS 2862.1:2021 Copper, lead, zinc and nickel concentrates — Sampling, Part 1: Sampling procedures for determination of metal and moisture content
- AS 2891.10:2005 Methods of sampling and testing asphalt - Water and volatile oils content
- AS 1141.30.1:2009
- AS 3586.4:1995 Ferroalloys - Sampling - Determination of quality variation, precision and bias
- AS/NZS 3580.18:2017 Methods for sampling and analysis of ambient air, Method 18: Measurement of road tunnel air quality
- AS 4459.5:1999 Methods of sampling and testing ceramic tiles - Determination of impact resistance by measurement of coefficient of restitution
European Committee for Standardization (CEN), how to measure z
- EN ISO 19156:2023 Geographic information - Observations, measurements and samples (ISO 19156:2023)
- CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid resistance
- prEN ISO 19156 Geographic information - Observations, measurements and samples (ISO/DIS 19156:2022)
- EN ISO 18589-2:2017 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy@ sampling and pre-treatment of samples
- EN ISO 186:2002 Paper and Board - Sampling to Determine Average Quality ISO 186:2002
- EN 22313:1992 Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of Recovery
- EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
- EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
- EN ISO 2313-2:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen (ISO 2313-2:2021)
- EN ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen (ISO 2313-1:2021)
BE-NBN, how to measure z
- NBN L 02-001-1972 Colorimetric vocabulary — Standards, methods and measuring apparatures
- NBN-ISO 4707:1992 Cork. Stoppers. Sampling for inspection for dimensional characteristics
- NBN T 03-251-1980 Liquid chlorine for industrial use - Method of sampling (for deter-mining only the volumetric chlorine content)
Indonesia Standards, how to measure z
- SNI 13-3476-1994 Coal, Determination of total moisture content of sample
- SNI 16-7058-2004 The measurement of total ash content in work place atmosphere
- SNI 19-7119.9-2005 Ambient atmospheres - Part 9: The determination of test sample location for controlling of roadside atmosphere quality
- SNI 13-6348-2000 Determination of tin (Sn) ore sample or tin concentrate by iodometry
- SNI 13-6591-2001 Determination of total sulphur content of minerals by KBr-Br2-HNO3 solution
Professional Standard - Press and Publication, how to measure z
- CY/T 105-2014 Sampling Test Specification for Optical Disc Quality of Reproduction
CN-QIYE, how to measure z
- Q/GDW 1899-2013 Calibration specification for AC sampling and measuring devices
Danish Standards Foundation, how to measure z
- DS/EN 62554:2012 Sample preparation for measurement of mercury level in fluorescent lamps
- DS/EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
- DS/ISO 23893-1:2008 Water quality - Biochemical and physiological measurements on fish - Part 1: Sampling of fish, handling and preservation of samples
- DS/ISO 15713:2007 Stationary source emissions - Sampling and determination of gaseous fluoride content
European Committee for Electrotechnical Standardization（CENELEC）, how to measure z
- EN 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps
KR-KS, how to measure z
- KS B ISO 4364-2020 Measurement of liquid flow in open channels —Bed material sampling
- KS A ISO 18589-2-2017 Measurement of radioactivity in the environment－Soil－Part 2：Guidence for the selection of the sampling strategy, sampling and pre-treatment of samples
- KS F ISO 9424-2008 Wood-based panels－Determination of dimensions of test pieces
- KS M ISO 1552-2012 Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
- KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
- KS A ISO 7503-2-2021 Measurement of radioactivity ―Measurement and evaluation of surface contamination ―Part 2: Test method using wipe-test samples
- KS M ISO 4656-2017 Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
ES-UNE, how to measure z
- UNE-EN IEC 62554:2011/A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by Asociación Española de Normalización in March of 2018.)
- UNE-EN 62554:2011 Sample preparation for measurement of mercury level in fluorescent lamps (Endorsed by AENOR in February of 2012.)
- UNE-EN ISO 18589-2:2018 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2015)
AENOR, how to measure z
- UNE-EN 12823-1:2014 Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol
- UNE 40228-5:1974 DETERMINATION OF ASH CONTENT IN SUBSAMPLES OF WASHED WOOL.
- UNE-EN ISO 13632:2013 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
CZ-CSN, how to measure z
API - American Petroleum Institute, how to measure z
- API CODE 50-A-1942 CODE FOR MEASURING@ SAMPLING AND TESTING NATURAL GAS (Second Edition)
- API RP 50A-1953 RECOMMENDED PRACTICE FOR MEASURING@ SAMPLING@ AND TESTING NATURAL GAS (THIRD EDITION)
- API STD 2500-1955 MEASURING@ SAMPLING@ AND TESTING CRUDE OIL Part V-Automatic Line Samplers (FIRST EDITION; SUPP 1: October 1956)
- API MPMS 8.4-2004 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement (Second Edition)
- API PUBL 2529-1975 Measuring@ Sampling@ testing and Base Conditions for Natural Gas Fluids (Third Edition)
- API RP 2529-1968 Recommended Practice for Measuring@ Sampling@ and Testing Natural Gas Fluids (FIRST EDITION)
- API MPMS 8.4-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Manual Sampling and Handling of Fuels for Volatility Measurement (First Edition; ASTM D5842)
- API STD 1201-1957 CALIBRATING TANK-CAR TANKS and MEASURING@ SAMPLING@ AND CALCULATING TANK-CAR QUANTITIES (NONPRESSURE-TYPE TANK CARS)
RU-GOST R, how to measure z
- GOST 938.13-1970 Leather. Method of measuring of weight and linear sizes of samples
- GOST 32546-2013 Paper and board. Sampling to determine average quality
- GOST 27589-1991 Coke. Method for determination of moisture content in analytical sample
- GOST 9516-1992 Coal. Determination of moisture in the analysis sample. Direct gravimetric method
- GOST 31671-2012 Foodstuffs. Determination of trace elements. Preparation of samples by pressure digestion
- GOST EN 13804-2013 Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
- GOST 8047-2001 Paper and board. Sampling to determine average quality
- GOST R ISO 15713-2009 Stationary source emissions. Sampling and determination of gaseous fluoride content
- GOST 8047-1993 Paper and board. Acceptance rules. Sampling to determine average quality
- GOST 8047-1978 Paper and cardboard. Acceptance rules. Sampling for tests
- GOST R ISO 15193-2015 In vitro medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
- GOST R 8.880-2015 State system for ensuring the uniformity of measurements. Crude oil. Pipeline sampling
- GOST 28810-1990 Rubber vulcanized. Determination of modulus in shear. Quadruple shear method
- GOST R 53781-2010 Lifts. Rules and method of examination (test) and measurement by certification of lifts. Rules of sampling
- GOST R ISO 3951-3-2009 Statistical methods. Sampling procedures for inspection by variables. Part 3. Double sampling schemes indexed by AQL for lot-by-lot inspection
- GOST 16598-1980 Manganese ores, concentrates and agglomerates. Methods of sampling and preparation of samples for chemical analysis and determination of moisture content
VN-TCVN, how to measure z
- TCVN 3649-2007 Paper and board.Sampling to determine average quality
- TCVN 6807-2001 Aluminium ores.Determination of hygroscopic moisture in analytical samples.Gravimetric method
- TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
YU-JUS, how to measure z
- JUS H.N8.212-1991 Paper and boar?. Sampling to determinc. avaragc. qxial1ty
- JUS B.G8.302-1988 Ores and concentrates. Chromium ores. Determination of hygroscoplc nolsture con-tent iu analytical samples. Gravimetric method
- JUS B.G8.232-1984 Ores and concentrates. Manganese ores. Determination of hygroscopic moisture content in analitical samples. Gravimetric method
- JUS B.G8.517-1989 Aluminium ores. Determination of hygroscopic moisture in analytical samples. Gra~ vimetric nethod
- JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.
- JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
CEN - European Committee for Standardization, how to measure z
Society of Automotive Engineers (SAE), how to measure z
- SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
- SAE AMS2372E-2007 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
- SAE AMS2374E-2011 Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings
- SAE AMS2372D-2002 Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings
- SAE AMS2372C-2001 QUALITY ASSURANCE SAMPLING AND TESTING Carbon and Low-Alloy Steel Forgings
- SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
- SAE AMS2372H-2019 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
- SAE AMS2372F-2011 Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings
- SAE AMS2372G-2014 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, how to measure z
- GB/T 23113-2017 Sample preparation for measurement of mercury level in fluorescent lamps
- GB/T 34162-2017 Natural gas—Determination of arsenic content—Potassium permanganate sample method
- GB/T 33681.1-2017 Methods to prepare samples for high-throughput gene sequencing—Part 1：Preparing samples of animal tissues
Professional Standard - Coal, how to measure z
Taiwan Provincial Standard of the People's Republic of China, how to measure z
- CNS 14320-1999 Digital test patterns for performance measurements on digital transmission equipment
AASHTO - American Association of State Highway and Transportation Officials, how to measure z
- T 127-2004 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- T 127-2011 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- R 71-2016 Standard Practice for Sampling and Amount of Testing of Hydraulic Cement
The American Road & Transportation Builders Association, how to measure z
- AASHTO T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- AASHTO R 71-2016 Standard Practice for Sampling and Amount of Testing of Hydraulic Cement
国家市场监督管理总局、中国国家标准化管理委员会, how to measure z
- GB/T 38358-2019 Sampling method of quality monitoring for E-commerce product
- GB/T 38086-2019 Determination of metallothionein (MT) in biological samples
- GB/T 40664-2021 General requirements for high-throughput sequencing technologies of detecting nucleic acid samples
- GB/T 17674-2021 Determination of nitrogen in crude oil—Boat-inlet chemiluminescence
- GB/T 38980-2020 Test method for artificial defect sizes of zirconium tube flaw detection comparison samples
CL-INN, how to measure z
VE-FONDONORMA, how to measure z
IT-UNI, how to measure z
- UNI 5064 P-1962
- UNI EN ISO 2313-1:2021 Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen
Association of German Mechanical Engineers, how to measure z
- VDI 4300 Blatt 8-2001 Measurement of indoor air pollution - Sampling of house dust
- VDI 3869 Blatt 4-2012 Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis
- VDI 3493 Blatt 1-1982 Gaseous emission measurement; determination of vinyl chloride; gas chromatographic method; grab sampling
- VDI 3863 Blatt 1-1987 Measurement of gaseous emission; determination of acrylonitrile; gaschromatographic method; grab sampling
- VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
- VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
NZ-SNZ, how to measure z
- AS/NZS 4492.1:2000 Wool - Fleece Testing and Measurement Method 1: Weighing and Sampling Greasy Wool for Fleece Testing and Measurement
Lithuanian Standards Office , how to measure z
- LST EN 62554-2012 Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011)
- LST EN 12823-1-2014 Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol
- LST EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)
Professional Standard - Commodity Inspection, how to measure z
- SN/T 3010-2011 Determination of mercury in paint. Method of direct determining of mercury with solid and liquid injection
- SN/T 3912.3-2014 Determination of mercury content in imported condensate.Direct injection method
- SN/T 3605-2013 Determination of mercury content in liquid petroleum products.Direct injection method
- SN/T 0916-2000 Method for the determination of dry matter content in ground sample of tea for import and export
Professional Standard - Environmental Protection, how to measure z
- HJ 1127-2020 Technical specification for gamma nuclide measurement of environmental samples in emergency monitoring
- HJ/T 1-1992 Fixing lustallation for gas meosuring and sampling
国家质量监督检验检疫总局, how to measure z
- SN/T 4763-2017 Determination of mercury content in coal Solid sampling-direct mercury meter method
- SN/T 4697-2016 Determination of mercury content in paper packaging Solid sample direct measurement of mercury
Professional Standard - Hygiene , how to measure z
- WS/T 254-2005 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Presentation of reference measurement procedures
Professional Standard - Agriculture, how to measure z
- 空气和废气监测分析方法 4.1.3-2003 Part 4 Precipitation Monitoring Chapter 1 Location, Sampling and Quality Assurance 3 Precipitation Sampling
- 空气和废气监测分析方法 4.1.2-2003 Chapter 4 Precipitation Monitoring Chapter 1 Layout, Sampling and Quality Assurance 2 Sampling Point Setting
- GB 8303-1987 Preparation of ground tea samples and determination of their dry matter content
- 空气和废气监测分析方法 4.1.6-2003 Part Four Precipitation Monitoring Chapter One Layout, Sampling and Quality Assurance Six Quality Assurance
- 空气和废气监测分析方法 4.1.4-2003 Part 4 Precipitation Monitoring Chapter 1 Layout, Sampling and Quality Assurance 4 Preservation and Processing of Precipitation Samples
Henan Provincial Standard of the People's Republic of China, how to measure z
- DB4106/T 80-2022 New Harvest Grain Quality and Safety Monitoring Sampling Specifications
Xinjiang Provincial Standard of the People's Republic of China, how to measure z
- DB6523/T 353-2023 Agricultural product quality and safety monitoring and sampling technical specifications
- DB6523/T 354-2023 Technical regulations for preservation of agricultural product quality and safety monitoring samples
- DB6523/T 352-2023 Technical regulations for sample preparation for agricultural product quality and safety monitoring
NL-NEN, how to measure z
- NEN 2819-1994 Air quality.Stationary source emissions.Sampling and determination of fluoride content
- NEN 6875-1993 Milk and milk products. Determination of Bacillus cereus content or its spores
- NPR 5628-1993 Radioactivity measurements. Sampling of the deposition
FI-SFS, how to measure z
Canadian General Standards Board （CGSB), how to measure z
NO-SN, how to measure z
- NS 3463-1987 Setting-out and measurement on a building site - Methods and tolerances
- NS 4784-1988 Water analysis - Sampling of natural waters for determination of trace metals
Shandong Provincial Standard of the People's Republic of China, how to measure z
- DB37/T 4572-2022 Technical Specifications for Quality and Safety Monitoring and Sampling of Livestock and Poultry Products
- DB37/T 3870-2020 Technical regulations for sample preparation for agricultural product quality and safety monitoring
- DB37/T 3869-2020 Technical regulations for preservation of agricultural product quality and safety monitoring samples
- DB37/T 3489-2019 Technical specification for quality and safety monitoring and sampling of agricultural products in Shandong Province
Professional Standard - Chemical Industry, how to measure z
- HG/T 2957.3-1984(1997) Alunite ores-Determination of hygroscopic moisture content in analytical samples-Gravimetric method
Professional Standard - Ferrous Metallurgy, how to measure z
- YB/T 4148-2006 Methods of measurement of the magnetic properties of electrical steel sheet and strip with a single small sheet sample
- YB/T 145-1998 Steel tubes.Measurement method of standard artificial defect for flaw detection
- YB/T 145-2013 Die casting and size measurement method of artificial defects on the reference sample pipes
PL-PKN, how to measure z
- PN P04741-1991 Textiles. Measurement of flame spread properties of vertically oriented specimens
- PN A75101-03-1990 Fruit and vegetable products -- Preparation of samples and physical and chemical test methods -- Determination of dry matter content by gravimetric method
未注明发布机构, how to measure z
- BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
- BS EN ISO 16000-11:2006(2010) Indoor air — Part 11 : Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
Professional Standard - Geology, how to measure z
- DZ/T 0130.16-2006 Geology and Mineral Resources Laboratory Testing Quality Management Regulations Part 16: Storage of Laboratory Samples and Secondary Samples
TR-TSE, how to measure z
- TS 438-1967 DETERM1NATION OF MOISTURE ?N THE ANALYSIS SAMPLE OF COAL BY THE DIRECT GRAVIMETRIC METHOD
- TS 239-1976 THE STAT1STICAL QUALITY CONTROL METHODS AND DETERMINATION OF SAMPLE S?ZE ?N THE TEXTILE INDUSTRY
SAE - SAE International, how to measure z
- SAE AMS2372C-1991 Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
Hebei Provincial Standard of the People's Republic of China, how to measure z
- DB13/T 5139-2019 Standards for sampling and management of livestock product quality and safety monitoring samples
VDI - Verein Deutscher Ingenieure, how to measure z
American Railway Engineering and Maintenance-of-Way Association (AREMA), how to measure z
- AREMA CH 3-8-1995 Methods of Testing Properties@ Volume@ Penetration@ and Quantity of Preservatives@ and of Measuring and Sampling Creosote