ZH
RU
ES

Dual Probe System

Dual Probe System, Total:500 items.

In the international standard classification, Dual Probe System involves: Characteristics and design of machines, apparatus, equipment, Machine tool systems, Transport, Medical equipment, Analytical chemistry, Linear and angular measurements, Software development and system documentation, Fasteners, Machine tools, Mechanical testing, Non-ferrous metals, Equipment for petroleum and natural gas industries, Shipbuilding and marine structures in general, Protection against fire, Alarm and warning systems, Telecontrol. Telemetering, Veterinary medicine, Textile machinery, On-board equipment and instruments, Nuclear energy engineering, Electrical accessories, Protection against crime, Company organization and management, Small craft, Explosion protection, Components for aerospace construction, Services, Leisure. Tourism, Testing of metals, Applications of information technology, Pipeline components and pipelines, Medical sciences and health care facilities in general, Thermodynamics and temperature measurements, Environmental protection, Non-destructive testing, Mining equipment, Insulation, Photography, Audio, video and audiovisual engineering, Telecommunication systems, Ground service and maintenance equipment, Technical product documentation, Earthworks. Excavations. Foundation construction. Underground works, Piezoelectric and dielectric devices, Electrical engineering in general, Fluid power systems, Aerospace electric equipment and systems.

German Institute for Standardization, Dual Probe System

DIN 4000-178:2016 Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
DIN 4000-178:2016-12 Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
DIN 4003-178:2016-12 Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli / Note: Applies in conjunction with DIN 4000-178 (2016-12), DIN 4003-1 (2014-02).
DIN EN ISO 11608-2:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022); German version EN ISO 11608-2:2022
DIN EN 2591-6415:2003 Aerospace series - Elements of electrical and optical connection; Test methods - Part 6415: Optical elements; Test probe damage; German and English version EN 2591-6415:2001
DIN EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
DIN EN 54-5:2001 Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; German version EN 54-5:2000
DIN 14674:2010 Fire detection and fire alarm systems - System interconnection
DIN 14674:2010-09 Fire detection and fire alarm systems - System interconnection / Note: Applies in conjunction with DIN VDE 0833-2 (2009-06).
DIN EN 54-12:2003 Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam; German version EN 54-12:2002
DIN EN ISO 11608-1:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022); German version EN ISO 11608-1:2022
DIN EN 54-5:2018-10 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors; German version EN 54-5:2017+A1:2018
DIN EN 54-10/A1:2006-03 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors; German version EN 54-10/A1:2005
DIN EN 54-26:2015-11 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors; German version EN 54-26:2015
DIN EN 54-10:2002-05 Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors; German version EN 54-10:2002 / Note: To be replaced by DIN EN 54-10 (2012-01).*To be amended by DIN EN 54-10/A1 (2005-06).
DIN EN 54-20:2009 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008); English version of DIN EN 54-20:2009-02
DIN V ENV 737-6:2003 Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003
DIN EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors; German version EN 54-5:2017
DIN EN 54-12:2015-10 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015
DIN EN 54-12 Berichtigung 1:2018-08 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015, Corrigendum to DIN EN 54-12:2015-10
DIN EN 54-27:2015-05 Fire detection and fire alarm systems - Part 27: Duct smoke detectors; German version EN 54-27:2015 / Note: To be amended by DIN EN 54-27/A1 (2016-07).
DIN 16196:1991 Dial indicating thermometers with electrical limit contact devices; filled system thermometers and bimetallic-thermometers
DIN 16196:2015 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN 16196:2013 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
DIN EN ISO 11608-4:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022); German version EN ISO 11608-4:2022
DIN EN 54-20:2009-02 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors; German version EN 54-20:2006+AC:2008 / Note: To be replaced by DIN EN 54-20 (2014-04).
DIN EN 54-5:2018 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors (includes Amendment A1:2018)
DIN EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam; German version EN 54-12:2015
DIN EN 54-22:2020-07 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors; German version EN 54-22:2015+A1:2020
DIN IEC 60094-6:1990 Magnetic tape sound recording and reproducing systems; reel-to-reel systems; identical with IEC 60094-6:1985
DIN 14662:2002 Firefighting and fire protection - Fire-brigade indication panel for fire detection and fire alarm systems
DIN EN 54-28:2016-07 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors; German version EN 54-28:2016
DIN 40148-2:1984 Transmission systems and two-ports; symmetry characteristics of linear two-ports
DIN EN 50131-2-3:2009 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors; German version EN 50131-2-3:2008
DIN EN 54-13:2005 Fire detection and fire alarm systems - Part 13: Compatibility assessment of system components; German version EN 54-13:2005

International Organization for Standardization (ISO), Dual Probe System

ISO/TR 4286:2021 Intelligent transport systems - Use cases for sharing of probe data
ISO/IEC 26561:2019 Software and systems engineering — Methods and tools for product line technical probe
ISO 230-10:2011/Amd 1:2014 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools - Amendment 1: Measuring performance with scanning probes
ISO 11608-2:2022 Needle-based injection systems for medical use — Requirements and test methods — Part 2: Double-ended pen needles
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
ISO 11608-1:2022 Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems
ISO 11608-1:2014 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO 19414:2020 Intelligent transport systems — Service architecture of probe vehicle systems
ISO 7240-5:2003 Fire detection and alarm systems - Part 5: Point-type heat detectors
ISO 7240-5:2018 Fire detection and fire alarm systems — Part 5: Point type heat detectors
ISO 7240-5:2012 Fire detection and alarm systems - Part 5: Point-type heat detectors
ISO 7240-10:2007 Fire detection and alarm systems - Part 10: Point-type flame detectors
ISO/TS 7240-29:2017 Fire detection and alarm systems - Part 29: Video fire detectors
ISO/DIS 7240-29 Fire detection and alarm systems — Part 29: Video fire detectors
ISO 7240-10:2012 Fire detection and alarm systems - Part 10: Point-type flame detectors
ISO/PRF 7240-29:2011 Fire detection and alarm systems — Part 29: Video fire detectors
ISO 21101:2014 Adventure tourism.Safety management systems.Requirements
ISO/TS 7240-30:2022 Fire detection and alarm systems — Part 30: Design, installation, commissioning and service of video fire detector systems
ISO 7240-15:2004 Fire detection and alarm systems - Part 15: Multisensor fire detectors
ISO 7240-20:2010 Fire detection and alarm systems - Part 20: Aspirating smoke detectors
ISO 7240-28:2008 Fire detection and alarm systems - Part 28: Fire protection control equipment
ISO 7240-28:2014 Fire detection and alarm systems - Part 28: Fire protection control equipment
ISO 7240-31:2022 Fire detection and alarm systems — Part 31: Resettable line-type heat detectors
ISO/TR 7240-9:2022 Fire detection and alarm systems — Part 9: Test fires for fire detectors
ISO 12239:2003 Fire detection and fire alarm systems - Smoke alarms
ISO 7240-24:2010 Fire detection and fire alarm systems - Part 24: Sound-system loudspeakers
ISO 11608-4:2022 Needle-based injection systems for medical use — Requirements and test methods — Part 4: Needle-based injection systems containing electronics
ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles
ISO/PAS 21195:2018 Ships and marine technology - Systems for the detection of persons while going overboard from ships (Man overboard detection)
ISO/DIS 7240-32:2011 Fire detection and alarm systems — Part 32: Non-resettable line-type heat detectors
ISO 15083:2020 Small craft — Bilge-pumping systems
ISO 7240-5:2003/Cor 1:2005 Fire detection and alarm systems - Part 5: Point-type heat detectors; Technical Corrigendum 1
ISO 7240-2:2017 Fire detection and alarm systems - Part 2: Fire detection control and indicating equipment
ISO/TS 25114:2010 Intelligent transport systems - Probe data reporting management (PDRM)
ISO 10360-5:2020 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus co
ISO/PAS 12868:2009 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
ISO 7240-13:2005 Fire detection and alarm systems - Part 13: Compatibility assessment of system components
ISO 7240-13:2020 Fire detection and alarm systems — Part 13: Compatibility assessment of system components

British Standards Institution (BSI), Dual Probe System

BS PD ISO/TR 4286:2021 Intelligent transport systems. Use cases for sharing of probe data
BS EN ISO 11608-2:2022 Needle-based injection systems for medical use. Requirements and test methods. Double-ended pen needles - Part 2: Needles
BS PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
20/30381877 DC BS EN ISO 11608-2. Needle-based injection systems for medical use. Requirements and test methods - Part 2. Double-ended needles
BS EN ISO 11608-1:2015 Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems
BS EN ISO 11608-1:2012 Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems
BS EN 54-5:2001 Fire detection and fire alarm systems. Heat detectors. Point detectors
BS EN 54-5:2017 Fire detection and fire alarm systems. Heat detectors. Point heat detectors
BS EN 54-5:2017+A1:2018 Fire detection and fire alarm systems - Heat detectors. Point heat detectors
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS EN 50131-2-2:2008 Alarm systems - Intrusion and hold-up systems - Intrusion detectors - Passive infrared detectors
BS ISO 7240-15:2004 Fire detection and alarm systems - Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor
BS EN ISO 11608-1:2022 Needle-based injection systems for medical use. Requirements and test methods - Needle-based injection systems
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN 50131-2-8:2016 Tracked Changes. Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
BS EN 50131-2-7-1:2012+A2:2016 Alarm systems. Intrusion and hold-up systems - Intrusion detectors. Glass break detectors (acoustic)
BS EN 50131-2-7-2:2012+A2:2016 Alarm systems. Intrusion and hold-up systems - Intrusion detectors. Glass break detectors (passive)
PD CLC/TS 50131-2-9:2016 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Active infrared beam detectors
BS DD CLC/TS 50131-2-3:2004 Alarm systems - Intrusion systems - Requirements for microwave detectors
BS ISO 19414:2020 Intelligent transport systems. Service architecture of probe vehicle systems
BS EN 54-20:2006 Fire detection and fire alarm systems - Aspirating smoke detectors
BS EN 50131-2-7-3:2012+A2:2016 Alarm systems. Intrusion and hold-up systems - Intrusion detectors. Glass break detectors (active)
BS EN 54-10:2002 Fire detection and fire alarm systems - Flame detectors - Point detectors
BS EN 54-26:2015 Fire detection and fire alarm systems. Carbon monoxide detectors. Point detectors
BS PD CLC/TS 50131-2-9:2016 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Active infrared beam detectors
BS EN 50131-2-7-1:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic)
BS EN 54-27:2015 Fire detection and fire alarms systems. Duct smoke detectors
BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
BS ISO 37002:2021 Whistleblowing management systems. Guidelines
BS ISO 19600:2014 Compliance management systems. Guidelines
18/30377731 DC BS ISO 19414. Intelligent transport systems. Service architecture of probe vehicle systems
BS EN 54-22:2015 Fire detection and fire alarm systems. Resettable line-type heat detectors
BS EN 54-22:2015+A1:2020 Fire detection and fire alarm systems. Introduction
BS ISO 21101:2014 Adventure tourism. Safety management systems. Requirements
BS DD CLC/TS 50131-2-2:2004 Alarm systems - Intrusion systems - Requirements for passive infrared detectors
BS PD CLC/TS 50131-2-11:2017 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. ALDDR
BS EN 50131-2-3:2008 Alarm systems — Intrusion and hold-up systems — Part 2-3 : Requirements for microwave detectors
BS ISO 7240-13:2020 Fire detection and alarm systems - Compatibility assessment of system components
BS EN 54-28:2016 Fire detection and fire alarm system. Non-resettable line-type heat detectors
BS EN 54-12:2002 Fire detection and fire alarm systems - Smoke detectors - Line detectors using an optical light beam
BS EN 54-12:2003 Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical light beam
12/30254902 DC BS EN 54-10. Fire detection and fire alarm systems. Part 10. Flame detectors. Point detectors
BS DD ENV 737-6:2003 Medical gas pipeline systems. Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
BS 5839-6:1995 Fire detection and alarm systems for buildings - Code of practice for the design and installation of fire detection and alarm systems in dwellings
BS EN 54-1:1996 Fire detection and fire alarm systems - Introduction
BS EN 54-1:2011 Fire detection and fire alarm systems. Introduction
BS PD IEC BS PAS 63312:2021 Technical specification for flame detector system of boiler
PD IEC PAS 63312:2021 Technical specification for flame detector system of boiler
BS EN 54-3:2001 Fire detection and fire alarm systems - Fire alarm devices - Sounders
BS EN 54-3:2014 Fire detection and fire alarm systems. Fire alarm devices. Sounders
BS EN ISO 11608-4:2022 Tracked Changes. Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems containing electronics
BS EN 54-13:2005 Fire detection and fire alarm systems - Compatibility assessment of system components
BS EN 54-13:2017+A1:2019 Fire detection and fire alarm systems. Introduction
BS EN 50131-2-2:2021 Alarm systems. Intrusion and hold-up systems - Requirements for passive infrared detectors
BS ISO 7240-1:2014 Fire detection and alarm systems. General and definitions
20/30381874 DC BS EN ISO 11608-1. Needle-based injection systems for medical use. Requirements and test methods. Part 1. Needle-based injection systems
14/30272874 DC BS ISO 7240-29. Fire detection and alarm systems. Part 29. Video fire detectors
23/30441394 DC BS ISO 7240-29. Fire detection and alarm systems - Part 29. Video fire detectors
BS ISO 11608-6:2022 Needle-based injection systems for medical use. Requirements and test methods - On-body delivery systems
16/30341983 DC BS ISO 7240-22. Fire detection and alarm systems. Part 22. Smoke-detection equipment for ducts
BS EN 54-4:1998 Fire detection and fire alarm systems - Power supply equipment
BS DD ISO/TS 25114:2010 Intelligent transport systems. Probe data reporting management (PDRM)
BS ISO 7240-28:2014 Fire detection and alarm systems. Fire protection control equipment
DD ISO/TS 25114:2010 Intelligent transport systems. Probe data reporting management (PDRM)
PD ISO/TR 4286:2021 Intelligent transport systems. Use cases for sharing of probe data
BS DD CLC/TS 50131-2-4:2004 Alarm systems - Intrusion systems - Requirements for combined passive infrared and microwave detectors
BS EN 50131-5-3:2005+A1:2008 Alarm systems - Intrusion systems - Part 5-3:Requirements for interconnections equipment using radio frequency techniques
BS ISO 16461:2018 Intelligent transport systems. Criteria for privacy and integrity protection in probe vehicle information systems
BS PD CLC/TS 50131-2-10:2014 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Lock state contacts (magnetic)
BS EN 50131-2-2:2017 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Lock state contacts (magnetic)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dual Probe System

GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 13179-1991 Si(Li) X-ray detector system
GB/T 13179-2008 Silicon (lithium) X-ray detector system
GB/T 33435-2016 Small craft.Carbon monoxide(CO) detection systems
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
GB/T 14480-1993 Standard practice for measuring the operating characteristics of eddy current flaw detecting system

国家市场监督管理总局、中国国家标准化管理委员会, Dual Probe System

GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

ES-UNE, Dual Probe System

UNE-EN ISO 11608-2:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN ISO 11608-1:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN 54-5:2017+A1:2019 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
UNE-EN 50131-2-2:2018 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
UNE-EN 54-26:2019 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
UNE-EN 50131-2-7-1:2013/IS1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
UNE-EN 50131-2-7-1:2013/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
UNE-EN 50131-2-7-3:2013/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
UNE-EN 50131-2-7-2:2013/IS1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
UNE-EN 50131-2-7-3:2013/IS1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
UNE-EN 50131-2-7-2:2013/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
UNE-EN 54-12:2019 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
UNE-EN 54-27:2019 Fire detection and fire alarms systems - Part 27: Duct smoke detectors
UNE-EN ISO 11608-4:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN 54-20:2007/AC:2009 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
UNE-EN 54-22:2016+A1:2021 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
UNE-EN 54-28:2019 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Dual Probe System

ASHRAE LO-09-092-2009 Modeling and Optimization of a Cascaded Mixed Gas Joule-Thompson Cryoprobe System
ASHRAE AT-96-18-2-1996 Dual-Tank Water-Heating System Options

Society of Automotive Engineers (SAE), Dual Probe System

SAE J2271-1996 Ship Systems and Equiment Part Standard for Studs Continous and Double End (Inch Series)
SAE AIR5273-2001 Actuation System Failure Detection Methods
SAE J1779-2003 Ship Systems and Equipment - Hydraulic System Design Criteria for Marine Vehicles
SAE AS39029/113-2007 Contact, Electrical Connector, Concentric Twinax, Pin, Size 8, MIL-DTL-38999 Series I, III and IV

Association of German Mechanical Engineers, Dual Probe System

VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
VDI/VDE 2634 Blatt 1-2002 Optical 3D measuring systems - Imaging systems with point-by-point probing

Association Francaise de Normalisation, Dual Probe System

NF EN ISO 11608-2:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 2 : aiguilles à deux extrémités pour stylos-injecteurs
NF S90-116:2020 Medical gas pipeline distribution systems - Sockets and related probes for medical fluids - Design and installation
NF E60-100-10/A1:2014 Test code for machine tools - Part 10 : determination of measuring performance of probing systems of numerically controlled machines tools - Amendment 1 : measuring performance with scanning probes
NF EN ISO 10360-5:2020 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnels (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisan...
NF S61-961:2007 Matériels de détection d'incendie - Systèmes Détecteurs Autonomes Déclencheurs (S.D.A.D)
NF EN ISO 11608-1:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 1 : systèmes d'injection à aiguille
NF S61-985/A1:2002 Fire detection and fire alarm systems - Part 5 : heat detectors - Point detectors.
NF C48-331-2-8*NF EN 50131-2-8:2017 Alarm systems - Intrusion and hold-up systems - Part 2-8 : intrusion detectors - Shock detectors
NF S61-990/A1*NF EN 54-10/A1:2006 Fire detection and fire alarm systems - Part 10 : flame detectors - point detectors
NF EN 54-5+A1:2018 Systèmes de détection et d'alarme incendie - Partie 5 : détecteurs de chaleur - Détecteurs ponctuels
NF EN 54-5/IN1:2018 Systèmes de détection et d'alarme incendie - Partie 5 : détecteurs de chaleur - Détecteurs ponctuels
NF S93-020-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1 : needle-based injection systems.
NF S93-020-1*NF EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1 : needle-based injection systems
NF S61-020*NF EN 54-20:2006 Fire detection and fire alarm systems - Part 20 : aspirating smoke detectors
NF S61-990*NF EN 54-10:2002 Fire detection and fire alarm systems - Part 10 : flame detectors - Point detectors
NF S61-985/IN1*NF EN 54-5/IN1:2018 Fire detection and fire alarm systems - Part 5 : heat detectors - Point heat detectors
NF S61-985*NF EN 54-5:2017 Fire detection and fire alarm systems - Part 5 : heat detectors - Point heat detectors
NF S61-985*NF EN 54-5+A1:2018 Fire detection and fire alarm systems - Part 5 : heat detectors - Point heat detectors
NF EN 54-10:2002 Systèmes de détection et d'alarme incendie - Partie 10 : détecteurs de flamme - Détecteurs ponctuels
NF EN 54-10/A1:2006 Systèmes de détection et d'alarme incendie - Partie 10 : détecteurs de flamme - Détecteurs ponctuels
NF C48-331-2-2:2008 Alarm systems - Intrusion and hold-up systems - Part 2-2 : intrusion detectors - Passive infrared detectors.
NF C48-331-2-2*NF EN 50131-2-2:2017 Alarm systems - Intrusion and hold-up systems - Part 2-2 : Intrusion detectors - Passive infrared detectors
NF EN 50131-2-8:2017 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-8 : détecteurs d'intrusion - Détecteurs de chocs
NF J95-003:2012 Small craft - Carbon monoxide (CO) detection systems.
NF S61-970:2007 Installation rules for fire detection systems.
NF S61-970/A1:2009 Installation rules for fire detection systems.
NF S61-981:1996 Fire detection and fire alarm systems. Part 1 : introduction.
NF C48-331-4:2009 Alarm systems - Intrusion and hold-up systems - Part 4 : warning devices.
NF EN 54-26:2015 Systèmes de détection et d'alarme incendie - Partie 26 : détecteurs de monoxyde de carbone - Détecteurs ponctuels
NF C48-331-2-7-1*NF EN 50131-2-7-1:2013 Alarm systems - Intrusion and hold-up systems - Part 2-7-1 : intrusion detectors -Glass break detectors (acoustic)
NF S61-960-26*NF EN 54-26:2015 Fire detection and fire alarm systems - Part 26 : carbon monoxide detectors - Point detectors
NF X50-832*NF ISO 21101:2014 Adventure tourism - Safety management system - Requirements
NF S61-970/A1:2017 Règles d'installation des systèmes de détection incendie (SDI)
NF S61-970:2013 Règles d'installation des Systèmes de Détection Incendie (SDI)
NF C48-331-2-7-3/A2*NF EN 50131-2-7-3/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-3 : intrusion detectors - Glass break detectors (active)
NF C48-331-2-7-1/A2*NF EN 50131-2-7-1/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-1 : intrusion detectors - Glass break detectors (acoustic)
NF C48-331-2-7-2/A2*NF EN 50131-2-7-2/A2:2016 Alarm systems - Intrusion and hold-up systems - Part 2-7-2 : intrusion detectors - Glass break detectors (passive)
NF EN ISO 11608-4:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 4 : systèmes d'injection à aiguille contenant de l'électronique
NF S61-952:1977 COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS. PART FIVE : HEAT-SENSITIVE DETECTORS. POINT DETECTORS CONTAINING A STATIC ELEMENT. (EUROPEAN STANDARD EN 54-5).
NF S61-960-12*NF EN 54-12:2015 Fire detection and fire alarm systems - Part 12 : smoke detectors - Line detectors using an optical beam
NF S61-960-27*NF EN 54-27:2015 Fire detection and fire alarm systems - Part 27 : duct smoke detectors
NF EN 50131-2-7-3/A1:2014 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-3 : détecteurs d'intrusion - Détecteurs bris de glace (actifs)
NF EN 50131-2-7-3/A2:2016 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-3 : détecteurs d'intrusion - Détecteurs bris de glace (actifs)
NF EN 50131-2-7-3:2013 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-3 : détecteurs d'intrusion - Détecteurs bris de glace (actifs)
NF EN 50131-2-7-1/A1:2014 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-1 : détecteurs d'intrusion - Détecteurs bris de glace (acoustiques)
NF EN 50131-2-7-2/A1:2014 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-2 : détecteurs d'intrusion - Détecteurs bris de glace (passifs)
NF EN 50131-2-7-1:2013 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-1 : détecteurs d'intrusion - Détecteurs bris de glace (acoustiques)
NF EN 50131-2-7-2/A2:2016 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-2 : détecteurs d'intrusion - Détecteurs bris de glace (passifs)
NF EN 50131-2-7-2:2013 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-2 : détecteurs d'intrusion - Détecteurs bris de glace (passifs)
NF EN 50131-2-7-1/A2:2016 Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 2-7-1 : détecteurs d'intrusion - Détecteurs bris de glace (acoustiques)
NF S93-020-2*NF EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2 : needles.
NF EN 54-20:2006 Systèmes de détection et d'alarme incendie - Partie 20 : détecteur de fumée par aspiration
NF EN 54-27:2015 Systèmes de détection et d'alarme incendie - Partie 27 : détecteurs de fumées dans les conduits
NF S61-960-28*NF EN 54-28:2016 Fire detection and fire alarm system - Part 28 : Non-resettable line-type heat detectors
NF EN 54-3/IN1:2019 Systèmes de détection et d'alarme incendie - Partie 3 : dispositifs sonores d'alarme feu
NF EN 54-3+A1:2019 Systèmes de détection et d'alarme incendie - Partie 3 : dispositifs sonores d'alarme feu
NF S61-987/A1*NF EN 54-7/A1:2002 Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Dual Probe System

GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

RU-GOST R, Dual Probe System

GOST 24392-1980 Monocrystalline silicon and germanium. Measurement of the electrical resistivity by the four-probe method
GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST R 59318-2021 Low voltage systems. Cable systems. Twisted pair and fiber optic cabling systems. General requirements

European Committee for Standardization (CEN), Dual Probe System

FprEN ISO 11608-2:2021 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO/FDIS 11608-2:2021)
EN ISO 11608-1:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022)
EN ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
EN 54-5:2000 Fire Detection and Fire Alarm Systems - Part 5: Heat Detectors - Point Detectors
EN 54-3:2014 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
EN 54-20:2006 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
prEN 54-10-1991 Components of automatic fire detection systems; part 10: flame detectors
EN 54-26:2015 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors (Incorporates Amendment A1: 2018)
EN 54-8:1988 Components of Automatic Fire Detection Systems - Part 8: High Temperature Heat Detectors
EN 54-8:1982 Components of automatic fire detection systems; Part 8: High temperature heat detectors
FprEN ISO 11608-1:2021 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO/FDIS 11608-1:2021)
EN 54-12:2002 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam
EN 54-5:2000/A1:2002 Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; Amendment A1
EN 54-27:2015 Fire detection and fire alarms systems - Part 27: Duct smoke detectors
prEN 54-12-1991 Components of automatic fire detection systems; part 12: optical smoke detectors
EN 54-1:2011 Fire detection and fire alarm systems - Part 1: Introduction
EN 54-1:2021 Fire detection and fire alarm systems - Part 1: Introduction
EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
EN 54-22:2015 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
DD ENV 737-6-2003 Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
EN 54-13:2005 Fire detection and fire alarm systems - Part 13: Compatibility assessment of system components
EN 54-10:2002 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors (Incorporates Amendment A1: 2005)

US-FCR, Dual Probe System

FCR AF 127-63 CHANGE 1-1979 FIRE ALARM AND DETECTION SYSTEMS
FCR AF 127-63-1978 FIRE ALARM AND DETECTION SYSTEMS
FCR FED FCGS 16721-1983 FIRE DETECTION AND ALARM SYSTEM
FCR UFGS-28 31 74.00 20-2010 INTERIOR FIRE DETECTION AND ALARM SYSTEM
FCR UFGS-13852N 02/01/03-2003 INTERIOR FIRE DETECTION AND ALARM SYSTEM
FCR UFGS-28 31 64.00 10-2009 FIRE DETECTION AND ALARM SYSTEM, ADDRESSABLE
FCR COE ETL 1110-3-389-1988 GUIDELINES FOR DESIGN AND CONSTRUCTION FIRE PROTECTION AND DETECTION SYSTEMS
FCR VA 27 32 41-2011 TWO-WAY RADIO EQUIPMENT AND SYSTEMS
FCR FED H-08-1 SEC 16735-2004 TWO WAY RADIO EQUIPMENT AND SYSTEMS
FCR UFGS-N-13855N-2001 ADDRESSABLE INTERIOR FIRE DETECTION AND ALARM SYSTEM
FCR UFGS-28 31 13.00 40-2013 FIRE DETECTION AND ALARM CONTROL, GUI, AND LOGIC SYSTEMS
FCR COE RPMAS 48810-1978 MAINTENANCE AND REPAIR OF FIRE DETECTION AND ALARM SYSTEMS

KR-KS, Dual Probe System

KS M ISO 7278-2-2003(2023)
KS C IEC 62642-2-2-2016 Alarm systems — Intrusion and hold-up systems — Part 2-2: Intrusion detectors ― Passive infrared detectors
KS C IEC 62642-2-71-2017 Alarm systems — Intrusion and hold-up systems — Part 2-71: Intrusion detectors – Glass break detectors (acoustic)
KS C IEC 62642-2-72-2017 Alarm systems — Intrusion and hold-up systems — Part 2-72: Intrusion detectors – Glass break detectors (acoustic)
KS B ISO 7240-5-2020 Fire detection and fire alarm systems — Part 5：Point type heat detectors
KS W ISO 13413-2016 Aerospace－Airframe needle track roller,yoke type, double-row, sealed－Inch series
KS B ISO 7240-13-2022 Fire detection and alarm systems — Part 13: Compatibility assessment of system components

Korean Agency for Technology and Standards (KATS), Dual Probe System

KS V 0921-1998 Shipbuilding-echo sounding equipment
KS C IEC 62642-2-3:2017 Alarm systems — Intrusion and hold-up systems — Part 2-3: Intrusion detectors — Microwave detectors
KS C IEC 62642-2-3-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-3: Intrusion detectors — Microwave detectors
KS C IEC 62642-2-2:2016 Alarm systems — Intrusion and hold-up systems — Part 2-2: Intrusion detectors ― Passive infrared detectors
KS C IEC 62642-2-2-2016(2021) Alarm systems — Intrusion and hold-up systems — Part 2-2: Intrusion detectors ― Passive infrared detectors
KS B ISO 7240-5:2007 Fire detection and alarm systems－Part 5：Point-type heat detectors
KS W ISO 13413-2016(2021) Aerospace－Airframe needle track roller,yoke type, double-row, sealed－Inch series
KS B ISO 6952-2006(2011) Fluid power systems and components－Two－pin electrical plug connectors with earth contact－Characteristics and requirements
KS C IEC 62642-2-72:2017 Alarm systems — Intrusion and hold-up systems — Part 2-72: Intrusion detectors – Glass break detectors (acoustic)
KS C IEC 62642-2-72-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-72: Intrusion detectors – Glass break detectors (acoustic)
KS C IEC 62642-2-71-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-71: Intrusion detectors – Glass break detectors (acoustic)
KS C IEC 62642-2-73-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-73: Intrusion detectors — Glass break detectors (active)
KS C IEC 62642-2-71:2017 Alarm systems — Intrusion and hold-up systems — Part 2-71: Intrusion detectors – Glass break detectors (acoustic)
KS B ISO 7240-5:2020 Fire detection and fire alarm systems — Part 5：Point type heat detectors
KS C IEC 62642-2-4:2016 Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors
KS C IEC 62642-2-4-2016(2021) Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors
KS E ISO 3551-1-2002(2017) Rotary core diamond drilling equipment－System A
KS W ISO 13413:2004 Aerospace-Airframe needle track roller,yoke type, double-row, sealed-Inch series
KS W ISO 13413:2016 Aerospace－Airframe needle track roller,yoke type, double-row, sealed－Inch series
KS B ISO 7240-13:2022 Fire detection and alarm systems — Part 13: Compatibility assessment of system components

Standard Association of Australia （SAA）, Dual Probe System

AS 1603.1:1997/Amdt 1:1998
AS 7240.10:2007 Fire detection and alarm systems - Point-type flame detectors
AS 7240.20:2012
AS 1603.2:1997 Automatic fire detection and alarm systems - Point type smoke detectors
AS 1603.2:1997/Amdt 1:1998
AS 1603.7:1996/Amdt 1:2001
AS ISO 7240.5:2018 Fire Detection and Alarm Systems, Part 5: Point-type heat detectors
AS 7240.5:2004 Fire detection and alarm systems - Point type heat detectors (ISO 7240-5:2003, MOD)
AS 7240.5:2004/Amdt 1:2007
AS ISO 7240.10:2018 Fire detection and alarm systems, Part 10: Point-type flame detectors
AS 7240.13:2006 Fire detection and alarm systems - Compatibility assessment of system components
AS 7240.13:2006/Amdt 1:2006
AS 1603.7:1996 Automatic fire detection and alarm systems - Optical beam smoke detectors
AS 7240.12:2007 Fire detection and alarm systems - Line type smoke detectors using a transmitted optical beam
AS 7240.22:2008
AS 12239:2004 Fire detection and alarm systems - Smoke alarms (ISO 12239:2003, MOD)
AS 1670:1986/Amdt 2:1988
AS 1670:1986/Amdt 3:1988
AS 1670:1986/Amdt 1:1997
AS 7240.15:2004 Fire detection and alarm systems - Multisensor fire detectors (ISO 7240-15:2004,MOD)
AS 7240.15:2004/Amdt 1:2007
AS 1851.8:1987 Maintenance of fire protection equipment - Automatic fire detection and alarm systems
AS 1603.13:1998 Automatic fire detection and alarm systems - Duct sampling units
AS 1603.13:2018 Automatic fire detection and alarm systems, Part 13: Duct sampling smoke detectors
AS 7240.21:2006 Fire detection and alarm systems - Routing equipment
AS 2201.3:1991 Intruder alarm systems - Detection devices for internal use
AS 1670:1986 Automatic fire detection and alarm systems - System design, installation, and commissioning

ZA-SANS, Dual Probe System

SANS 50054-5:2000 Fire detection and fire alarm systems Part 5: Heat detectors - Point detectors
SANS 164-2:2018 Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2: Two-pole and earth and 2 pin (Class II), 16 A 250 V a.c. system
SANS 322:2005 Fire detection and alarm systems for hospitals
SANS 50054-3:2001 Fire detection and fire alarm systems Part 3: Fire alarm devices - Sounders
SANS 728-8:2009 Automatic fire detection and alarm systems Part 8: Multi-point aspirated smoke detectors
SANS 50054-1:2009 Fire detection and fire alarm systems Part 1: Introduction
SANS 10139:2007 Fire detection and alarm systems for buildings - System design, installation and servicing

AT-ON, Dual Probe System

ONORM F 3070-1989 Maintenance of fire detection Systems
OENORM F 3052-2021 Fire detection and fire alarm systems - Alarm transmission systems
ONORM EN 54 Teil.6-1989 Components of automatic fire detection Systems; heat sensitive detectors; rate ofrise point detectors without a static element
ONORM EN 54 Teil.7-1989 Components of automatic fire detection Systems; point type smoke detectors; detectors using scattered light, transmitted light or ionization

Professional Standard - Electron, Dual Probe System

SJ 20885-2003 General specification for GPS radiosonde system
SJ/T 9167.7-1993 Double insulation systems for use in electrical equipment

Military Standard of the People's Republic of China-General Armament Department, Dual Probe System

GJB 6553-2008 general specifiction for GPS sounding system
GJB 3335-1998 General specifications for aerial underwater exploration systems
GJB 10261-2021 General specifications for mine target detection systems
GJB 5602-2006 General specification for dropsonde-winding system
GJB 6070-2007 General specification for dropsonde-parachute system
GJB 4105A-2021 General Specifications for Army Nuclear Explosion Monitoring and Detection Systems
GJB 4105-2000 General Specifications for Army Nuclear Explosion Monitoring and Detection Systems
GJB 4517-2002 Artillery sound detection system force test procedures

Underwriters Laboratories (UL), Dual Probe System

UL 268-2009 Smoke detectors for fire alarm systems
UL 521-1999 UL Standard for Safety Heat Detectors for Fire Protective Signaling Systems Seventh Edition; Reprint with Revisions Through and Including July 20, 2005
UL 268-2006 Smoke detectors for fire alarm signaling systems
UL 1097-1997 Double insulation systems for use in electrical equipment
UL 1097-2004 UL Standard for Safety Double Insulation Systems for Use in Electrical Equipment Fifth Edition
UL 1097-2012 UL Standard for Safety Double Insulation Systems for Use in Electrical Equipment (Sixth Edition; Reprint with revisions through and including April 26@ 2016)
UL 2097-1994 Double insulation systems for use in electronic equipment
UL 1097-1993 Double insulation systems for use in electrical equipment
UL 1097-2021 UL Standard for Safety Double Insulation Systems for Use in Electrical Equipment (Sixth Edition; Reprint with revisions through and including April 26@ 2016)

Hubei Provincial Standard of the People's Republic of China, Dual Probe System

DB42/T 1864.2-2022 Technical Regulations for Diagnosis of Poultry Epidemic Diseases Part 2: Detection of Avian Escherichia coli Pathogenic Groups by Dual Probe Method

European Committee for Electrotechnical Standardization（CENELEC）, Dual Probe System

CLC/TS 50131-2-8-2012 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
EN 50131-2-8:2016 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
CLC/TS 50131-2-9-2016 Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors - Active infrared beam detectors
CLC/TS 50131-2-9:2016 Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors - Active infrared beam detectors
CLC/TS 50131-2-11-2017 Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR
CLC/TS 50131-2-11:2017 Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR
EN 50131-2-3:2008 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors

Danish Standards Foundation, Dual Probe System

DS/CLC/TS 50131-2-8:2012 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
DS/EN ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems
DS/EN 50131-2-2:2008 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
DS/EN 50131-2-7-1:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
DS/EN 50131-2-7-2:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
DS/EN 50131-2-7-3:2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
DS/EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles

AENOR, Dual Probe System

UNE-EN 50131-2-8:2017 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
UNE-EN 54-5/A1:2002 Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors.
UNE-EN 54-5:2001 Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
UNE-EN 54-10:2002 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors.
UNE-EN 54-10:2002/A1:2007 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
UNE-EN 50131-2-2:2008 Alarm systems- Intrusion and hold-up systems- Part 2-2: Intrusion detectors- Passive infrared detectors
UNE-ISO 21101:2015 Adventure tourism. Safety management systems. Requirements.
UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
UNE-EN 50131-2-7-1:2013 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
UNE-EN 50131-2-7-2:2013/A1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
UNE-EN 50131-2-7-2:2013 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
UNE-EN 50131-2-7-1:2013/A1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
UNE-EN 50131-2-7-3:2013 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
UNE-EN 50131-2-7-3:2013/A1:2014 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
UNE-EN 54-12:2003 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam.
UNE-EN 54-20:2007 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
UNE 23507:1989 WATER SPRAY FIXED SYSTEMS. AUTOMATIC FIRE DETECTION EQUIPMENT.

Group Standards of the People's Republic of China, Dual Probe System

T/ZZB 2646-2022 Numerical control system for circular knitting machine
T/JIA 0001-2021 Video fire detection and alarm system
T/ZZB 2910-2022 Spark detecting and water based extinguishing systems
T/CIE 176-2023
T/QGCML 1708-2023 Low-code full-platform security detection system
T/SDAS 710-2023 Systematic identification of pulse acupuncture technical specification
T/JIA 0002-2021 Code of practice for video fire detection and alarm system
T/CFPA 026-2023 Human Model System For Life Detection Radar Testing
T/QGCML 1857-2023 Technical specifications for non-destructive testing and penetrant testing systems
T/SHFIA 0002-2018 Technical specification for Iot fire detection alarm system

国家药监局, Dual Probe System

YY/T 1768.1-2021 Requirements and test methods for medical needle injection systems Part 1: Needle injection systems
YY/T 1768.2-2021 Requirements and test methods for medical needle injection systems Part 2: Needles

未注明发布机构, Dual Probe System

JIS T 3226-1:2023 Needle-based injection systems for medical use -- Part 1: Needle-based injection systems -- Requirements and test methods
BS EN 54-10:2002(2006) Fire detection and fire alarm systems — Part 10 : Flame detectors — Point detectors
JIS T 3226-2:2023 Needle-based injection systems for medical use -- Part 2: Needles -- Requirements and test methods
BS 5445-8:1984(1999) Components of automatic fire detection systems Part 8 : Specification for high temperature heat detectors
DIN EN ISO 10360-5:2001 Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 5: CMMs using multiple stylus probing systems

VN-TCVN, Dual Probe System

TCVN 7568-5-2013 Fire detection and alarm systems.Part 5: Point-type heat detectors

CEN - European Committee for Standardization, Dual Probe System

PREN 54-10-2012 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-5:1988 Components of Automatic Fire Detection Systems Part 5 Heat Sensitive Detectors - Point Detectors Containing a Static Element
PREN 54-20-2014 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-3:2014/A1:2019 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders

未注明发布机构, Dual Probe System

JIS T 3226-1:2023 Needle-based injection systems for medical use -- Part 1: Needle-based injection systems -- Requirements and test methods
BS EN 54-10:2002(2006) Fire detection and fire alarm systems — Part 10 : Flame detectors — Point detectors
JIS T 3226-2:2023 Needle-based injection systems for medical use -- Part 2: Needles -- Requirements and test methods
BS 5445-8:1984(1999) Components of automatic fire detection systems Part 8 : Specification for high temperature heat detectors
DIN EN ISO 10360-5:2001 Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 5: CMMs using multiple stylus probing systems

Lithuanian Standards Office , Dual Probe System

LST EN 50131-2-2-2008 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
LST EN ISO 11608-1:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2012)
LST EN 50131-2-7-3-2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
LST EN 50131-2-7-2-2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
LST EN 50131-2-7-1-2012 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)

Professional Standard-Ships, Dual Probe System

CB 1114-1984 Hydraulic system air release needle plug

United States Navy, Dual Probe System

NAVY UFGS-28 31 74.00 20-2010 INTERIOR FIRE DETECTION AND ALARM SYSTEM

GB-REG, Dual Probe System

REG AC 120-107-2011 Use of Remote On-Ground Ice Detection System
REG UFGS-28 31 13.00 40-2008 FIRE DETECTION AND ALARM CONTROL, GUI, AND LOGIC SYSTEMS
REG UFGS-28 31 13.00 40-2013 FIRE DETECTION AND ALARM CONTROL, GUI, AND LOGIC SYSTEMS

Japanese Industrial Standards Committee (JISC), Dual Probe System

JIS T 3226-1:2015 Needle-based injection systems for medical use -- Part 1: Needle-based injection systems -- Requirements and test methods
JIS T 3226-2:2015 Needle-based injection systems for medical use -- Part 2: Needles -- Requirements and test methods
JIS Z 2315:1991 Test methods for performance characteristics of eddy current flaw detecting system

CZ-CSN, Dual Probe System

CSN 80 5026-1983 Knitted products. System of sizes and designation of knitted products for glrls and boys.
CSN 80 5025-1983 Kni?ted products. System of sizes and designation of knltted products for womem and men
CSN EN ISO 9004 OPRAVA 1:2001

YU-JUS, Dual Probe System

JUS N.S6.111-1989 Alarm systems. Intruder alarm systems. Reguirements fordetectors — general
JUS N.S6.112-1989 Alarm systems. Intrudu alarm systems. Requirements for infrared-beam interruption detectors in buil- ings

SE-SIS, Dual Probe System

SIS SS-EN 54/8-1986 Components of automatic fire detection systems - Part 8: High temperature heat detectors

IT-UNI, Dual Probe System

UNI EN 54-P5-1979
UNI ISO 21101:2020 Adventure tourism - Safety management systems - Requirements
UNI EN 54-P1-1979

Defense Logistics Agency, Dual Probe System

DLA QPL-16032-QPD-2011 SWITCHES AND DETECTORS, SHIPBOARD ALARM SYSTEMS
DLA QPL-16032-60 NOTICE 1-2008 Switches and Detectors, Shipboard Alarm Systems

American National Standards Institute （ANSI), Dual Probe System

ANSI/UL 521-2010 Heat Detectors for Fire Protective Signaling Systems
ANSI/UL 268-2009 Smoke Detectors for Fire Alarm Signaling Systems

American Society for Testing and Materials (ASTM), Dual Probe System

ASTM F1198-92(2012)e1 Standard Guide for Shipboard Fire Detection Systems
ASTM F1198-92(2018)e1 Standard Guide for Shipboard Fire Detection Systems

ABMA - American Bearing Manufacturers Association, Dual Probe System

13413-1997 Aerospace - Airframe Needle Track Roller@ Yoke Type@ Double-Row Sealed - Inch Series

CENELEC - European Committee for Electrotechnical Standardization, Dual Probe System

CLC/TS 50131-2-7-2-2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
CLC/TS 50131-2-7-1-2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
CLC/TS 50131-2-7-3-2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
CLC/TS 50131-2-3-2004 Alarm systems - Intrusion systems Part 2-3: Requirements for microwave detectors
CLC/TS 50131-2-2-2004 Alarm systems - Intrusion systems Part 2-2: Requirements for passive infrared detectors

PL-PKN, Dual Probe System

PN E08390-22-1993 Alarm systems. Requirements for intruder alarm systems. Requirements for detectors. General
PN M51004-01-1992 Components of automatic fire etection systems ntroduction
PN E08390-25-1993 Alarm systems. Requirements for intruder alarm systems. Microwave doppler detectors for use in buildings
PN E08390-26-1993 Alarm systems. Requirements for intruder alarm systems. Passive infra-red detectors for use in buildings
PN M51004-06-1993 Components of automatic fire detection systems. Heat sensitive detectors. Rate of rise point detectors with-out a static element
PN M51004-05-1992 Components of automatic fire detection systems; Part 5: Heat sensitive detectors; Point detectors containing a static element

NEMA - National Electrical Manufacturers Association, Dual Probe System

NEMA C78.1413-1982 DIMENSIONS AND CENTERING SYSTEMS FOR PROJECTION LAMPS - TWO-INCH INTEGRAL REFLECTOR LAMP WITH TWO-PIN GLASS BASE GX5.3 OR GY5.3
NEMA SB 11-2001 Guide for Proper Use of System Smoke Detectors
NEMA SB 11-2017 Guide for Proper Use of System Smoke Detectors

NL-NEN, Dual Probe System

NEN 2535-1986 Fire detection installations System- and quality requirements and guidelines for detector siting

FI-SFS, Dual Probe System

SFS 5178 E-1985 This standard is approved in English

International Telecommunication Union (ITU), Dual Probe System

ITU-R QUESTION 139-37-2000 Data transmission for Earth exploration-satellite systems
ITU-R REPORT M.2084-2006 Satellite detection of automatic identification system messages
ITU-R QUESTION 139-3/7-2000 Data transmission for Earth exploration-satellite systems
ITU-T L.21 FRENCH-1996 Fire Detection and Alarm Systems Detector and Sounder Devices Study Group 6; 12 pp
ITU-T L.21 SPANISH-1996 Fire Detection and Alarm Systems, Detector and Sounder Devices

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Dual Probe System

QUESTION 139-3/7-2000 Data transmission for Earth exploration-satellite systems

National Electrical Manufacturers Association（NEMA), Dual Probe System

NEMA GUIDE - SYSTEM-2001 Guide for Proper Use of System Smoke Detectors
NEMA SB 11-2011 Guide for Proper Use of System Smoke Detectors

Shanghai Provincial Standard of the People's Republic of China, Dual Probe System

DB31/T 1310-2021 Spark Detection and Extinguishing Systems Application Guide

US-CFR-file, Dual Probe System

CFR 40-1065.145-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.145:Gaseous and PM probes, transfer lines, and sampling system components.

American Society of Quality Control （ASQC), Dual Probe System

ASQ E14004-2004 Environmental Management Systems - General Guidelines on Principles, Systems and Support Techniques T14004
ASQ Q9004-2000 Quality Management Systems - Guidelines for Performance Improvements T2104 [Superseded: ASQ Q9004-1]
ASQ Q10005-2005 Quality management systems Guidelines for quality plans T815
ASQ Q10007-2003 Quality management systems Guidelines for configuration management T814

ES-AENOR, Dual Probe System

Professional Standard - Petroleum, Dual Probe System

SY/T 5158-2008 Technical specification of computerized logging system for petroleum exploration
SY/T 5927-2000 Specification for GPS surveying in petroleum geophysical exploration
SY/T 6029-1994 Oil and Gas Exploration Information System Management Regulations

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Dual Probe System

GJB 5875-2006 General specification for television detection system of targeting pod

AASHTO - American Association of State Highway and Transportation Officials, Dual Probe System

TP 103-2013 Standard Method of Test for Detectable Warning Systems
TP 103-2012 Standard Method of Test for Detectable Warning Systems

The American Road & Transportation Builders Association, Dual Probe System

AASHTO TP 103-2013 Standard Method of Test for Detectable Warning Systems

NZ-SNZ, Dual Probe System

NZS 4512:2010 Fire Detection and Alarm Systems in Buildings

工业和信息化部, Dual Probe System

JB/T 13394-2018 Digital photo double-sided printing system

Professional Standard - Aviation, Dual Probe System

HB 4544-1992 ＭＪinternal thread Pin type double end plain plug gauge ＭＪ1.6~ＭＪ3 for Series Ⅰtechnical bottom holes
HB 4540-1992 ＭＪinternal thread Pin type double end plain plug gauge ＭＪ1.6~ＭＪ3 for Series Ⅰtechnical bottom holes
HB 6759-1993 General specification for aircraft misfire and overheat detection systems
HB 6554-1991 General specification for aircraft flame and smoke detection systems

U.S. Military Regulations and Norms, Dual Probe System

ARMY MIL-P-71171 NOTICE 1-1997 PALLET, SPECIAL METAL FOR STINGER WEAPON SYSTEM
ARMY MIL-P-71171-1993 PALLET, SPECIAL METAL FOR STINGER WEAPON SYSTEM

Professional Standard - Navy, Dual Probe System

HJB 433-2008 General specification for observe of the under water system in the motor vehicle

Inner Mongolia Provincial Standard of the People's Republic of China, Dual Probe System

DB1504/T 2002-2022 Specifications for Underground Pipeline Detection and Information System Construction

Henan Provincial Standard of the People's Republic of China, Dual Probe System

DB41/T 2253-2022 Technical specification for underground pipeline detection and information system

中国石油天然气总公司, Dual Probe System

SY/T 5927-1994 Petroleum Geophysical Exploration Global Positioning System (GPS) Measurement Specifications

BE-NBN, Dual Probe System

NBN S 21-105-1987 PARTIE 5 : DETECTEURS DE CHALEUR - DETECTEURS PONCTUELS CONTENANT UN ELEMENT STATIQUE
NBN S 21-106-1987 PARTIE 6 : DETECTEURS DE CHALEUR DETECTEURS VELOCIMETRIQUES PONCTUELS SANS ELEMENT STATIQUE

American Concrete Institute, Dual Probe System

ACI 421.3R-2015 Guide to Design of Reinforced Two-Way Slab Systems

SAE - SAE International, Dual Probe System

SAE AS39029/113B-2016 Contact, Electrical Connector, Concentric Twinax, Pin, Size 8, MIL-DTL-38999 Series I, III and IV
SAE AS39029/113A-2008 Contact, Electrical Connector, Concentric Twinax, Pin, Size 8, MIL-DTL-38999 Series I, III and IV