ZH
RU
ES

The higher the flexural modulus

The higher the flexural modulus, Total:232 items.

In the international standard classification, The higher the flexural modulus involves: Wood-based panels, Mechanical testing, Footwear, Sports equipment and facilities, Wood, sawlogs and sawn timber, Cellular materials, Plastics, Paper and board, Construction materials, Ceramics, Cork and cork products, Fibre optic communications, Surface treatment and coating, Products of the chemical industry, Glass, Pipeline components and pipelines, Reinforced plastics, Paper products, Mechanical structures for electronic equipment, Waxes, bituminous materials and other petroleum products, Road engineering, Insulating materials, Soil quality. Pedology, Raw materials for rubber and plastics.

RO-ASRO, The higher the flexural modulus

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending

GM North America, The higher the flexural modulus

GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus
GM GMP.PU.021-1999 Polyurea RRIM - High Heat, 20% Calcium Silicate (9986021), 1625 MPA Flexural Modulus
GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GM GMP.E/P.121-2003 Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.E/P.048-1993 Polyolefin Alloy - 925 MPa Flexural Modulus, Injection Molding Grade, Black
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.041-1990 Polyolefin Alloy - 35% Mineral Filled, 700 MPa Flexural Modulus, Black
GM GMP.E/P.062-1996 Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.063-1996 Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.E/P.014-1992 Polyolefin Alloy - Weather Resistant, 18% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.045-1992 Polyolefin Alloy - Weather Resistant, 320 MPa Flexural Modulus, Extrusion Grade, Black
GM GMP.E/P.050-1995 Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.056-1993 Polyolefin Alloy - Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus
GM GMP.E/P.076-2004 Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.PBTP+PETP.002-2001 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 6150 MPa Flexural Modulus
GMP.E/P.099-2011 Polyolefin Alloy ?900 MPa Flexural Modulus, High Flow Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.133-2011 Polyolefin Alloy ?1000 MPa Flexural Modulus, High Flow Issue 2; Do Not Use on New Programs; Replaced by GMW15185
GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
GM GMP.E/P.051-1997 Polyolefin Alloy - Weatherable, 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.047-1993 Polyolefin Alloy - Weather Resistant, 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus
GMP.EEBC.019-2005 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 49, 250 MPa Flexural Modulus
GM GMP.E/P.030-1991 Polyolefin Alloy - Blow Molding Grade, 85 MPa Flexural Modulus, Integrally Colored, UV Light Stable
GM GMP.E/P.068-1996 Polyefin Alloy - Weatherable, 25% Glass and Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.023-2012 Poluolefin Alloy - 550 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GMP.E/P.121-2011 Polyolefin Alloy ?1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/P.059-2012 Polyolefin Alloy - 320 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; Replaced by GMW16622)
GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003
GMP.PA66.085-2011 Flexible Nylon 66 ?600 Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.122-2011 Polyolefin Alloy ?Weather Resistant, 1300 MPa Flexural Modulus, 20% Filled, High Flow Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.039-2011 Polyolefin Alloy ?700 MPa Flexural Modulus Issue 4; Do Not Use on New Programs; No Replacement
GMP.E/P.074-2011 Polyolefin Alloy ?800 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/P.096-2004 Polyolefin Alloy - MPa Flex Mod, UV Stabilized, High Flow
GM GMP.E/MA.016-2003 E/MA-Ionomer - UV Stabilized, 4% Glass Fiber Filled, 900 MPa Flexural Modulus, Injection Molded
GMP.E/P.152-2011 Polyolefin Alloy ?2500 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW15740
GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
GMP.E/P.064R-2011 Polyolefin Alloy ?Recycled, 550 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.069-2011 Polyolefin Alloy ?Weather Resistant, 925 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/P.020-2012 Polyolefin Alloy - 15% Mineral Filled, 1200 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
GMP.E/P.149-2011 Polyolefin Alloy ?Weather Resistant, 2500 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW15739
GM GMP.E/P.087-2012 Polyolefin Alloy - Weather Resistant, 275 MPa Flexural Modulus, Injection Molding Grade (Issue 2; Do Not Use on New Programs; Replaced by GMW16490)
GM GMP.E/P.145-2004 Thermoplastic Olefin - 475 MPa Flexural Modulus High Flow for Airbag Door Applications
GM GMP.PUR.014-1998 HP Polyurethane RRIM - 15% Mica, 350 MPa Flex
GM GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.E/P.048-2011 Polyolefin Alloy ?925 MPa Flexural Modulus, Injection Molding Grade, Black Issue 3; Do Not Use on New Programs; No Replacement
GM GMP.E/P.026-2012 Polyolefin Alloy - 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.004-2013 Thermoplastic Polyester Elastomer 47 Type D Hardness, 90 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.015-2013 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PBT+PET.003-2014 PBT+PET - 40% Glass Fiber Reinforced/Mineral Filled, 9200 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GMP.E/P.089-2011 Polyolefin Alloy ?20% Mineral Filled, 1950 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW16336
GM GMP.E/P.019-1993 Polyolefin Alloy - 26% Mineral Reinforced, 1550 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
GM GMP.E/P.021-1993 Polyolefin Alloy - 28% Mineral Filled, 1600 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
GMP.E/P.050-2011 Polyolefin Alloy ?Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus Issue 3; Do Not Use on New Programs; No Replacement
GMP.E/P.056-2011 Polyolefin Alloy ?Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.062-2011 Polyolefin Alloy ?15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE Issue 4; Do Not Use on New Programs; No Replacement
GMP.E/P.063-2011 Polyolefin Alloy ?25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE Issue 3; Do Not Use on New Programs; No Replacement
GMP.E/P.076-2011 Polyolefin Alloy ?Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.PUR.016-1993 HP Polyurethane RRIM - 20% Flake Glass, 1100 MPa Flexural Modulus
GM GMP.PUR.017-1993 HP Polyurethane RRIM - 22% Glass Fiber, 1000 MPa Flexural Modulus

European Committee for Standardization (CEN), The higher the flexural modulus

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)

Danish Standards Foundation, The higher the flexural modulus

DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
DS/ISO 23486:2021 Metallic and other inorganic coatings – Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures

British Standards Institution (BSI), The higher the flexural modulus

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
20/30382553 DC BS ISO 23486. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS ISO 23486:2021 Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
15/30300655 DC BS ISO 19477. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings by beam bending
BS ISO 11093-8:1998 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2017 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS 2782-3 Method 323G:1997 Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 4152:2021 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent axial long-term modulus of pipes subject to beam bending
20/30409883 DC BS ISO 4152. Glass‐reinforced thermosetting plastics (GRP) pipes. Determination of the apparent axial long‐term modulus of pipes subject to beam bending
BS IEC 62899-501-1:2019 Printed electronics - Quality assessment. Failure modes and mechanical testing. Flexible or bendable primary or secondary cells

German Institute for Standardization, The higher the flexural modulus

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN ISO 6267:1980 Alpine skis; measurement of bending vibrations
DIN ISO 6267:1980-09 Alpine skis; measurement of bending vibrations
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN 60191-6-19:2010 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage (IEC 60191-6-19:2010); German version EN 60191-6-19:2010
DIN ISO 11093-8:2018 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2017)
DIN ISO 11093-8:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2012 + Cor. 1:2012)
DIN ISO 11093-8:2016 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2012 + Cor. 1:2012)
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

Lithuanian Standards Office , The higher the flexural modulus

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

Indonesia Standards, The higher the flexural modulus

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

AENOR, The higher the flexural modulus

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE

Association Francaise de Normalisation, The higher the flexural modulus

NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF S52-710*NF ISO 6267:1994 Alpine skis. Measurement of bending vibrations.
NF EN 14771:2012 Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.
NF A91-054*NF ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
NF ISO 19477:2016 Revêtements métalliques et autres revêtements inorganiques - Mesurage du module de Young des revêtements barrières thermiques par flexion de poutre
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF EN 993-6:2018 Méthodes d'essai pour produits réfractaires façonnés (denses) - Partie 6 : détermination du module de rupture par flexion à température ambiante
NF P98-260-2:1992 Test relating to pavements. Measurement of rheological properties on bituminous mixes. Part 2 : determination of the dynamic bending modulus.
NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées

未注明发布机构, The higher the flexural modulus

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

Korean Agency for Technology and Standards (KATS), The higher the flexural modulus

KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS G ISO 6267:2004 Alpine skis－Measurement of bending vibrations
KS G ISO 6267-2004(2019) Alpine skis－Measurement of bending vibrations
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-8:2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 11093-8:2014 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS M ISO 11093-8:2008 Paper and board-Testing of cores-Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures

GM Global, The higher the flexural modulus

GMW 15187-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow Issue 2; English
GMW 15185-2013 Polyolefin Alloy - 1000 MPa Flexural Modulus, High Flow Issue 2; English
GMW 16826-2013 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow, Low Density Issue 2; English
GMW 16827-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, Weather Resistant, High Flow, Low Density Issue 1; English

PL-PKN, The higher the flexural modulus

PN N97022-1992 Alpin skis. Measurement of bending vibrations

AT-ON, The higher the flexural modulus

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM S 4025-1978 Alpine ski; bending vibrations; measurement method

CZ-CSN, The higher the flexural modulus

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

ZA-SANS, The higher the flexural modulus

SANS 6112:1988 Bending modulus of steel shanks for footwear
SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes

International Organization for Standardization (ISO), The higher the flexural modulus

ISO 6267:1980 Alpine skis; Measurement of bending vibrations
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 23486:2021 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
ISO 11093-8:2012 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:2017 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 4152:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent axial long-term modulus of pipes subject to beam bending
ISO 11093-8:2012/cor 1:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis; Technical Corrigendum 1

BE-NBN, The higher the flexural modulus

NBN-EN 310-1994

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The higher the flexural modulus

GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration

YU-JUS, The higher the flexural modulus

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity

American Society for Testing and Materials (ASTM), The higher the flexural modulus

ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending

Professional Standard - Machinery, The higher the flexural modulus

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

KR-KS, The higher the flexural modulus

KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-8-2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

International Electrotechnical Commission (IEC), The higher the flexural modulus

IEC TR 62547:2009 Guidelines for the measurement of high-power damage sensitivity of single-mode fibres to bends and guidance for interpretation of results
IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results

ES-AENOR, The higher the flexural modulus

Japanese Industrial Standards Committee (JISC), The higher the flexural modulus

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS R 1604:1995 Testing method for flexural strength (modulus of rupture) of fine ceramics at elevated temperature
JIS R 1604:2008 Testing method for flexural strength (modulus of rupture) of fine ceramics at elevated temperature

(U.S.) Ford Automotive Standards, The higher the flexural modulus

FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***

IN-BIS, The higher the flexural modulus

IS 2380 Pt.4-1977

Standard Association of Australia （SAA）, The higher the flexural modulus

AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS 1774.31.1:2000(R2013)

NZ-SNZ, The higher the flexural modulus

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

工业和信息化部, The higher the flexural modulus

YD/T 2964-2015 Measurement method for bend loss insensitive single-mode optical fiber for access network
JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

VN-TCVN, The higher the flexural modulus

TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

RU-GOST R, The higher the flexural modulus

GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending

GM Daewoo, The higher the flexural modulus

GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)

ES-UNE, The higher the flexural modulus

UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)

American National Standards Institute （ANSI), The higher the flexural modulus

ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending