ZH
RU
ES

Rubber Flexural Modulus

Rubber Flexural Modulus, Total:482 items.

In the international standard classification, Rubber Flexural Modulus involves: Rubber, Analytical chemistry, Wood-based panels, Pipeline components and pipelines, Cork and cork products, Rubber and plastics products, Products of the textile industry, Aerospace electric equipment and systems, Mechanical testing, Footwear, Testing of metals, Plastics, Wood, sawlogs and sawn timber, Seals, glands, Cellular materials, Paper and board, Adhesives, Equipment for the rubber and plastics industries, Construction materials, Ceramics, Fluid power systems, Raw materials for rubber and plastics, Products of the chemical industry, Fibre optic communications, Glass, Materials for aerospace construction, Reinforced plastics, Surface treatment and coating, Paper products, Aerosol containers.

SE-SIS, Rubber Flexural Modulus

SIS 74 18 12-1962 Bent ruhber hoses
SIS SS-ISO 1746:1990 Rubber or plastics hoses and tubing — Bending tests
SIS SS-ISO 1827:1992 Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method

RO-ASRO, Rubber Flexural Modulus

STAS 9416-1973 RUBBER HOSES Bending test
STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 8478-1969
STAS ISO 1746:1992 Rubber and plastics hoses and tubing. Bending tests
STAS 5162/5-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEA'IH. Melhods o{ bending test
STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending

GM North America, Rubber Flexural Modulus

GMP.EEBC.019-2005 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 49, 250 MPa Flexural Modulus
GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.048-1993 Polyolefin Alloy - 925 MPa Flexural Modulus, Injection Molding Grade, Black
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus
GM GMP.PU.021-1999 Polyurea RRIM - High Heat, 20% Calcium Silicate (9986021), 1625 MPA Flexural Modulus
GM GMP.E/P.041-1990 Polyolefin Alloy - 35% Mineral Filled, 700 MPa Flexural Modulus, Black
GM GMP.E/P.062-1996 Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.063-1996 Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.E/P.014-1992 Polyolefin Alloy - Weather Resistant, 18% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.045-1992 Polyolefin Alloy - Weather Resistant, 320 MPa Flexural Modulus, Extrusion Grade, Black
GM GMP.E/P.050-1995 Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.056-1993 Polyolefin Alloy - Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus
GM GMP.E/P.076-2004 Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.PBTP+PETP.002-2001 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 6150 MPa Flexural Modulus
GM GMP.E/P.121-2003 Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow
GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
GM GMP.E/P.051-1997 Polyolefin Alloy - Weatherable, 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.047-1993 Polyolefin Alloy - Weather Resistant, 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus
GM GMP.E/P.030-1991 Polyolefin Alloy - Blow Molding Grade, 85 MPa Flexural Modulus, Integrally Colored, UV Light Stable
GM GMP.E/P.068-1996 Polyefin Alloy - Weatherable, 25% Glass and Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.023-2012 Poluolefin Alloy - 550 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.E/P.059-2012 Polyolefin Alloy - 320 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; Replaced by GMW16622)
GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003
GMP.PA66.085-2011 Flexible Nylon 66 ?600 Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.039-2011 Polyolefin Alloy ?700 MPa Flexural Modulus Issue 4; Do Not Use on New Programs; No Replacement
GMP.E/P.074-2011 Polyolefin Alloy ?800 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/MA.016-2003 E/MA-Ionomer - UV Stabilized, 4% Glass Fiber Filled, 900 MPa Flexural Modulus, Injection Molded
GMP.E/P.152-2011 Polyolefin Alloy ?2500 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW15740

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Rubber Flexural Modulus

GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 5565-1994 Rubber or plastics hoses and tubing--Bending tests
GB/T 18426-2001 Rubber--or plastics-coated fabrics--Low-temperature bend test
GB/T 17200-1997 Requirements for tensile, flexural and compression testing machines for rubbers and plastics
GB/T 5565-2006 Rubber or plastics hoses and tubing. Bending tests
GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 17200-2008 Technical specification for tensile, compression and flexural testing machines for rubber an plastics (constant rate of traverse)
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB 7529-1987 General rules of visual quality for moulded and extruded rubber products
GB/T 12830-2008 Rubber, vulcanized or thermoplastic.Determination of shear modulus and adhesion to rigid plates.Quadruple shear methods

TR-TSE, Rubber Flexural Modulus

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2641-1977 Vulcanized Rubbers Determination of Compression Set Under Constant Deflection At Low Temperatures
TS 2859-1977 RUBBER, VULCANIZED - DETERMINATION OF MODULUS IN SHEAR - QUADRUPLE SHEAR METHOD

Professional Standard - Chemical Industry, Rubber Flexural Modulus

HG/T 3844-2008 Ebonite.Determination of cross breaking strength
HG/T 3613-1999 Rubber or plastics coated fabrics Low-temperature bend test
HG/T 3321-2012 Vulcanized rubber.Determination of elastic modulus
HG/T 3090-1987 General rules of visual quality for moulded and extruded rubber products

PL-PKN, Rubber Flexural Modulus

PN C04227-1986 Rubber vulcanized Determination of flex craking
PN O91132-1987 Shoe materials Rubbers and stuffs for soles Determinatin of resistance to multiple bending
PN-EN ISO 22751-2021-03 E Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

Taiwan Provincial Standard of the People's Republic of China, Rubber Flexural Modulus

CNS 10017-1983 Method of Test for Bending Fatigue of Vulcanized Rubber

RU-GOST R, Rubber Flexural Modulus

GOST 10828-1975 Rubber. Method for the determination of dynamic modulus and internal friction modulus under variable sing flexure with rotation
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST R 50028-1992 Rubber or plastics hoses and tubing. Bending test
GOST 10952-1975 Rubber. Methods for determination of fatigue life under variable sign flexure with rotation
GOST 12021-1984 Plastics and ebonite. Method of determination of deflection under load temperature
GOST 28789-1990 Rubber- or plastics-coated fabrics. Low temperature bend test
GOST 28790-1990 Rubber or plastics-coated fabrics. Determination of flexibility. Flat loop method
GOST 28791-1990 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing (dynamic method)
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 9625-2013 Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
GOST R ISO 5981-2017 Rubber- or plastics-coated fabrics. Methods for determination of resistance to combined shear flexing and rubbing
GOST ISO 10619-1-2016 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 1. Bending test at ambient temperature
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 28810-1990 Rubber vulcanized. Determination of modulus in shear. Quadruple shear method

Association Francaise de Normalisation, Rubber Flexural Modulus

NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.
NF T47-203:1993 Rubber or plastics hoses and tubing. Bending tests.
NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF T46-015:1987 Vulcanized rubber. Determination of the resistance to flex craking (de mattia).
NF T46-015*NF ISO 132:2017 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
NF G37-133*NF EN ISO 7854:1997 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing.
NF ISO 4666-4:2018 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 4 : flexomètre à contrainte constante
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF EN ISO 6803:2017 Tuyaux et flexibles en caoutchouc ou en plastique - Essai d'impulsions de pression hydraulique sans flexion
NF T47-203-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature.
NF EN 14771:2012 Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)
NF G37-110*NF EN ISO 5981:2007 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing.
NF E48-087*NF EN ISO 6802:2018 Rubber and plastics hoses and hose assemblies - Hydraulic impulse test with flexing
NF EN ISO 7854:1997 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance à la flexion
NF ISO 4666-3:2023 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 3 : flexomètre à compression (type à déformation constante)
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF T47-203-2*NF EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures
NF T47-203-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures.
NF G37-111-1*NF EN 1876-1:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.
NF EN ISO 10619-1:2018 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 1 : essais de courbure à température ambiante
NF E48-088:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).
NF T47-286*NF EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
NF EN ISO 6802:2018 Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques - Essai d'impulsions hydrauliques avec flexions
NF EN ISO 32100:2018 Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre
NF ISO 5893:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications
NF EN ISO 22751:2020 Supports textiles revêtus de caoutchouc ou de plastique - Essai physique et mécanique - Détermination de la force de flexion
NF T47-203-1*NF EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature
NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
NF ISO 4666-1:2010 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 1 : principes fondamentaux
NF EN ISO 10619-2:2021 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 2 : essais de courbure à des températures inférieures à l'ambiante
NF P84-604*NF EN 495-5:2013 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: plastic and rubber sheets for roof waterproofing
NF ISO 5893/A1:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications - AMENDEMENT 1
NF A91-054*NF ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NF T46-200/A1:2020 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification - AMENDMENT 1
XP T47-817:2001 Appareils d'appui en caoutchouc - Détermination du module de cisaillement dynamique et de l'amortissement
NF ISO 19477:2016 Revêtements métalliques et autres revêtements inorganiques - Mesurage du module de Young des revêtements barrières thermiques par flexion de poutre
NF T46-020*NF ISO 1827:2016 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
NF EN 993-6:2018 Méthodes d'essai pour produits réfractaires façonnés (denses) - Partie 6 : détermination du module de rupture par flexion à température ambiante

European Committee for Standardization (CEN), Rubber Flexural Modulus

EN 21746:1993 Rubber or plastics hoses and tubing; bending tests (ISO 1746:1983)
EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
EN 1876-1:1997 Rubber- or Plastics-Coated Fabrics - Low-Temperature Tests - Part 1: Bending Test
EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
EN ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulicpressure impulse test without flexing
EN ISO 8032:1999 Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test)
EN ISO 6802:2008 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
EN ISO 1746:2000 Rubber or Plastics Hoses and Tubing - Bending Tests Supersedes EN 21746:1993; ISO 1746:1998, Including Technical Corrigendum 1:1999

Professional Standard - Aerospace, Rubber Flexural Modulus

QJ 2536.3-1993 Small Combined Bending Die Components Forming Rubber

International Organization for Standardization (ISO), Rubber Flexural Modulus

ISO 1746:1983 Rubber or plastics hoses and tubing — Bending tests
ISO 1746:1998 Rubber or plastics hoses and tubing - Bending tests
ISO 4672:1997 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
ISO 4675:1979 Fabrics coated with rubber or plastics — Low temperature bend test
ISO 4675:1990 Rubber- or plastics-coated fabrics; low-temperature bend test
ISO 4675:2017 Rubber- or plastics-coated fabrics - Low-temperature bend test
ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
ISO 5981:1982 Rubber or plastics coated fabrics; Determination of flex abrasion
ISO 132:1983 Rubber, vulcanized; Determination of flex cracking (De Mattia)
ISO 7854:1995 Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing
ISO 1746:1998/Cor 1:1999 Rubber or plastics hoses and tubing - Bending tests
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 10619-1:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature
ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-2:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
ISO 132:2005 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
ISO 1653:1975 Vulcanized rubbers; Determination of compression set under constant deflection at low temperatures
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 6803:1994 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
ISO 8032:1987 Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (Half omega test)
ISO 6803:1984 Rubber or plastics hoses and hose assemblies — Hydraulic pressure impulse test without flexing
ISO 22751:2020 Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force
ISO 6802:1982 Rubber and plastics hose and hose assemblies — Wire reinforced — Hydraulic impulse test with flexing
ISO 5893:2019 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing
ISO 6802:1991 Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing
ISO 6802:2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
ISO 815:1972 Vulcanized rubbers; Determination of compression set under constant deflection at normal and high temperatures
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
ISO 5893:1985 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description
ISO 5893:2019/Amd 1:2020 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification — Amendment 1
ISO 1827:1976 Rubber, vulcanized; Determination of modulus in shear; Quadruple shear method
ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
ISO 1827:2022 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
ISO 23486:2021 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
ISO 11093-8:2012 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:2017 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 1827:2007 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods

Danish Standards Foundation, Rubber Flexural Modulus

DS/ISO 1746:1984 Rubber or plastics hoses and tubing. Bending tests
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/ISO 132:1979 Vulcanized rubbers. Determination of resistance to flex cracking (De Mattia-type machine)
DS/EN ISO 7854:1998 Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing
DS/ISO 1653:1979 Vulcanized rubber. Determination of compression set under constant deflection at low temperatures
DS/EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
DS/EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
DS/EN ISO 5981:2008 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing
DS/EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
DS/EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
DS/EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
DS/EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
DS/ISO 10619-2:2021 Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 2: Bending tests at sub-ambient temperatures
DS/EN ISO 10619-2:2021 Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
DS/ISO 23486:2021 Metallic and other inorganic coatings – Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
DS/IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results

YU-JUS, Rubber Flexural Modulus

JUS G.S3.102-1991 Rubber and plastics hoses and tubing.Bending test
JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity

BE-NBN, Rubber Flexural Modulus

NBN-EN 21746-1993 Rubber or plastics hoses and tubing. Bending tests (ISO 1746:1983)
NBN-EN 310-1994
NBN-EN 26802-1993 Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing (ISO 6802:1991)
NBN-ISO 1827:1994 Rubber, vulcanized or thermoplastic. Determination of modulus in shear or adhesion to rigid plates. Quadruple shear method
NBN-HD 022.4-1993 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 4: Cords and flexible cables

IN-BIS, Rubber Flexural Modulus

Japanese Industrial Standards Committee (JISC), Rubber Flexural Modulus

JIS K 6260:1993 Flex cracking test methods for vulcanized rubber
JIS K 6260:2017 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia Type)
JIS K 6330-9:1998 Testing methods for rubber and plastics hoses -- Part 9: Bending tests
JIS K 6272:2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification
JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS K 6404-13:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 13: Low-temperature bend test
JIS K 6404-6:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 6: Crease-flex test
JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
JIS K 6330-9:2003 Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing

Korean Agency for Technology and Standards (KATS), Rubber Flexural Modulus

KS M ISO 1746:2008 Rubber or plastics hoses and tubing－Bending tests
KS M ISO 4675:2012 Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675-2012(2017) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675-2012(2022) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 132:2018 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth(De Mattia)
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 5981-2012(2022) Rubber- or plastics-coated fabrics－Determination of resistance to combined shear flexing and rubbing
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 5893:2005 Rubber and plastics test equipment-Tensile, flexural and compression types(constant rate of traverse)-Specification
KS M ISO 5981:2012 Rubber- or plastics-coated fabrics－Determination of resistance to combined shear flexing and rubbing
KS M ISO 8032:2009 Rubber and plastics hose assemblies－Flexing combined with hydraulic impulse test(half-omega test)
KS M ISO 6802:2021 Rubber or plastics hoses and hose assemblies —Hydraulic impulse test with flexing
KS M ISO 5981-2012(2017) Rubber- or plastics-coated fabrics－Determination of resistance to combined shear flexing and rubbing
KS M ISO 5893:2015 Rubber and plastics test equipment－Tensile, flexural and compression types(constant rate of traverse)－Specification
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 6803:2018 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
KS K 0855-2018 Test method of resistance to damage by flexing for rubber or plastics coated fabric
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS M ISO 5893:2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification
KS M ISO 6802:2010 Rubber and plastics hoses and hose assemblies with wire reinforcements-Hydraulic impulse test with flexing
KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-1:2019 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
KS M ISO 10619-1:2014 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part1: Bending tests at ambient temperature
KS M ISO 4666-1-2015(2021) Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS M ISO 10619-2:2019 Rubber and plastics hoses and tubing —Measurement of flexibility and stiffness —Part 2: Bending tests at sub-ambient temperatures
KS M ISO 10619-2:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures
KS M 6722-2008 Testing methods of torsional modules at low temperature for vulcanized rubbers
KS M 6722-1983 Testing methods of torsional modules at low temperature for vulcanized rubbers
KS M ISO 1827:2009 Rubber, vulcanized or thermoplastic-Determination of modulus in shear or adhesion to rigid plates-Quadruple shear method
KS M ISO 1827:2014 Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M 6722-2003 Testing methods of torsional modules at low temperature for vulcanized rubbers
KS M ISO 11093-8:2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 11093-8:2014 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

KR-KS, Rubber Flexural Modulus

KS M ISO 1746-2008 Rubber or plastics hoses and tubing－Bending tests
KS M ISO 132-2018 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth(De Mattia)
KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
KS K 0855-2018(2023) Test method of resistance to damage by flexing for rubber or plastics coated fabric
KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 6802-2021 Rubber or plastics hoses and hose assemblies —Hydraulic impulse test with flexing
KS M ISO 6803-2018 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
KS M ISO 5893-2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification
KS M ISO 10619-1-2019 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
KS M ISO 10619-2-2019 Rubber and plastics hoses and tubing —Measurement of flexibility and stiffness —Part 2: Bending tests at sub-ambient temperatures
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-8-2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

未注明发布机构, Rubber Flexural Modulus

BS EN ISO 1746:2001 Rubber or plastics hoses and tubing — Bending tests
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
DIN EN ISO 5981:1998 Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

German Institute for Standardization, Rubber Flexural Modulus

DIN 78028:1981-03 Tube valves; rubber base valve 60° bent for bicycle tubes
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
DIN EN ISO 6802:2018-12 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018); German version EN ISO 6802:2018
DIN EN 1876-1:1998 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 1876-1:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN ISO 7854:1997-04 Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997
DIN EN ISO 5981:2008 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007); English version of DIN EN ISO 5981:2008-01
DIN EN ISO 22751:2020-12 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020); German version EN ISO 22751:2020
DIN EN ISO 32100:2019-02 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018); German version EN ISO 32100:2018
DIN EN ISO 6803:1997 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
DIN EN ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
DIN EN ISO 5981:2008-01 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007); German version EN ISO 5981:2007
DIN EN ISO 6802:2010 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005); German version EN ISO 6802:2008
DIN EN ISO 6803:2017-07 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
DIN EN ISO 10619-1:2018-05 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017); German version EN ISO 10619-1:2018
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
DIN 53548:1983 Testing of rubber; determination of the freezing behaviour of vulcanized rubbers by moduls-temperature measurement (Gehman test)
DIN EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
DIN EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011); German version EN ISO 10619-2:2011
DIN EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011); German version EN ISO 10619-1:2011
DIN EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017); German version EN ISO 10619-1:2018
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN EN ISO 10619-2:2021-10 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021); German version EN ISO 10619-2:2021
DIN EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)
DIN EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020); German version EN ISO 22751:2020
DIN EN ISO 6803:2010 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008); German version EN ISO 6803:2008
DIN EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017

British Standards Institution (BSI), Rubber Flexural Modulus

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
16/30334089 DC BS ISO 4675. Rubber- or plastics-coated fabrics. Low-temperature bend test
BS EN ISO 10619-2:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
BS EN ISO 32100:2018 Tracked Changes. Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
BS EN ISO 7854:1997 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 132:2011 Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS EN ISO 8032:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS EN ISO 8032:1998 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS EN ISO 5981:2007 Rubber or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing
BS EN ISO 22751:2020 Rubber or plastic coated fabrics. Physical and mechanical test. Determination of bending force
BS ISO 4666-4:2018 Tracked Changes. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Constant-stress flexometer
BS EN ISO 6802:2018 Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
BS EN ISO 10619-1:2018 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
BS EN ISO 6802:2015 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
BS EN ISO 6802:2008 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
BS EN ISO 6803:2017 Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
BS ISO 4666-3:2022 Tracked Changes. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
19/30367574 DC BS EN ISO 22751. Rubber or plastic coated fabrics. Physical and mechanical test. Determination of bending force
BS EN ISO 10619-2:2021 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
BS ISO 5893:2019+A1:2020 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
20/30375727 DC BS EN ISO 10619-2. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 2. Bending tests at sub-ambient temperatures
PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
20/30411276 DC BS ISO 5893 AMD1. Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
15/30300655 DC BS ISO 19477. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings by beam bending
BS ISO 11093-8:1998 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2017 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
20/30382553 DC BS ISO 23486. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS ISO 1827:2016 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 1827:2011 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 23486:2021 Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS 2782-3 Method 323G:1997 Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 10154:1995 Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end

Lithuanian Standards Office , Rubber Flexural Modulus

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN ISO 7854:2000 Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995)
LST EN 1876-1-2000 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
LST EN ISO 5981:2008 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007)
LST EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008)
LST EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
LST EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)
LST EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
LST EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
LST EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

Indonesia Standards, Rubber Flexural Modulus

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI 06-4893-1998 Determination of flex craching of vulcanized rubber using De Mattia type device

AENOR, Rubber Flexural Modulus

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE-EN ISO 7854:1997 RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING. (ISO 7854:1995).
UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE
UNE-EN ISO 6803:2017 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
UNE-EN ISO 5981:2008 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007)
UNE-EN ISO 8032:1999 RUBBER AND PLASTICS HOSE ASSEMBLIES. FLEXING COMBINED WITH HYDRAULIC IMPULSE TEST (HALF-OMEGA TEST) (ISO 8032:1997)
UNE-EN ISO 6802:2009 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)

Society of Automotive Engineers (SAE), Rubber Flexural Modulus

SAE AMS-DTL-23053/10A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible
SAE AMS3306B-2007 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
SAE AMS3347B-2003 RUBBER, SILICONE 1200 psi (8.27 MPa), High Modulus 45 - 55
SAE AMS3306A-1995 RUBBER, SILICONE 1200 psi (8.27 MPa), High Modulus 55 - 65
SAE AMS3347-1967 SILICONE RUBBER 1200 psi, High Modulus 45 - 55
SAE AMS3306-1986 SILICONE RUBBER 1200 psi (8.25 MPa), High Modulus 55 - 65
SAE AMS3373/2A-1987 Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure
SAE AMS3373/1A-1987 Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure
SAE AMS3373/2B-2012 Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure
SAE AMS3373/1B-2012 Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure

GOSTR, Rubber Flexural Modulus

GOST ISO 4675-2019 Rubber- or plastics-coated fabrics. Low-temperature bend test
GOST ISO 7854-2019 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing
GOST 12021-2017 Plastics and ebonite. Method for determination of temperature of deflection under load
GOST ISO 10619-2-2020 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 2. Bending test at sub-ambient temperatures

国家市场监督管理总局、中国国家标准化管理委员会, Rubber Flexural Modulus

GB/T 18426-2021 Rubber- or plastics-coated fabrics—Low-temperature bend test

AT-ON, Rubber Flexural Modulus

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM EN 21746-1993 Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1983)
OENORM EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
OENORM EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

CZ-CSN, Rubber Flexural Modulus

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN EN 21746-1995 Rubber or plastics hoses and tubing.Bending tests(ISO 1746:1983)
CSN 62 1488-1982 Vulcanized rubber. Method of determination of resistance to flex cracking and to crack growth
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

ZA-SANS, Rubber Flexural Modulus

SANS 6112:1988 Bending modulus of steel shanks for footwear
SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes
SANS 5893:2003 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

Professional Standard - Aviation, Rubber Flexural Modulus

HB 0-15-1974 60° flange lightening holes pressed by rubber molding

CH-SNV, Rubber Flexural Modulus

SN 181 162-1987 Mineral oil productsQuality directions for unleaded automobil fuels
SN EN ISO 22751:2021 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
SN EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

NL-NEN, Rubber Flexural Modulus

NEN-ISO 1746:1993 Rubber or plastics hoses and tubing. Bending tests (ISO 1746: 1983)
NEN-ISO 6802:1993 Rubber and plastics hose and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing (ISO 6802:1991)

ES-UNE, Rubber Flexural Modulus

UNE-EN ISO 32100:2019 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)
UNE-EN ISO 6802:2019 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
UNE-EN ISO 22751:2021 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
UNE-EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
UNE-EN ISO 10619-2:2022 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)

HU-MSZT, Rubber Flexural Modulus

American Society for Testing and Materials (ASTM), Rubber Flexural Modulus

ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D623-07 Standard Test Methods for Rubber Property8212;Heat Generation and Flexing Fatigue In Compression
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D623-99e1 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM D623-99 Standard Test Methods for Rubber Property-Heat Generation and Flexing Fatigue In Compression
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D623-07(2019) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM D1052-85(1999)e1 Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
ASTM D1052-05 Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus

CEN - European Committee for Standardization, Rubber Flexural Modulus

EN ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulicpressure impulse test without flexing
EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at subambient temperatures
EN ISO 6802:2018 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing

Professional Standard - Machinery, Rubber Flexural Modulus

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

PT-IPQ, Rubber Flexural Modulus

NP EN 1876-1-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 1:Bending test

IT-UNI, Rubber Flexural Modulus

UNI EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force
UNI EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
UNI 4640-1960

SAE - SAE International, Rubber Flexural Modulus

SAE AMS3306A-1991 Rubber@ Silicone 1200 psi (8.27 MPa)@ High Modulus 55 - 65
SAE AMS3347A-1986 Silicone Rubber 1200 psi (8.25 MPa)@ High Modulus 45 - 55

ES-AENOR, Rubber Flexural Modulus

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Rubber Flexural Modulus

GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures
GB/T 5565.2-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures

GM Global, Rubber Flexural Modulus

GMW 15187-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow Issue 2; English
GMW 15185-2013 Polyolefin Alloy - 1000 MPa Flexural Modulus, High Flow Issue 2; English
GMW 16826-2013 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow, Low Density Issue 2; English
GMW 16827-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, Weather Resistant, High Flow, Low Density Issue 1; English

Standard Association of Australia （SAA）, Rubber Flexural Modulus

AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS 1774.31.1:2000(R2013)

NZ-SNZ, Rubber Flexural Modulus

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

工业和信息化部, Rubber Flexural Modulus

YD/T 2964-2015 Measurement method for bend loss insensitive single-mode optical fiber for access network
JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

Shandong Provincial Standard of the People's Republic of China, Rubber Flexural Modulus

DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber

VN-TCVN, Rubber Flexural Modulus

TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

The American Road & Transportation Builders Association, Rubber Flexural Modulus

AASHTO T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

GM Daewoo, Rubber Flexural Modulus

GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)

International Electrotechnical Commission (IEC), Rubber Flexural Modulus

IEC TR 62547:2009 Guidelines for the measurement of high-power damage sensitivity of single-mode fibres to bends and guidance for interpretation of results
IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results

(U.S.) Ford Automotive Standards, Rubber Flexural Modulus

FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***