ZH
RU
ES
The basics of the flash point meter
The basics of the flash point meter, Total:116 items.
In the international standard classification, The basics of the flash point meter involves: Protection against fire, Fuels, Petroleum products in general, Lubricants, industrial oils and related products, Paints and varnishes, Power transmission and distribution networks, Adhesives, Wastes, Protection of and in buildings, Aids for disabled or handicapped persons, Acoustics and acoustic measurements, Education, Aerospace electric equipment and systems, Measurement of volume, mass, density, viscosity, Construction technology.
British Standards Institution (BSI), The basics of the flash point meter
- BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- 22/30441177 DC BS EN ISO 3679. Determination of flash point Method for flash no-flash and flash point by small scale closed cup tester
- BS EN ISO 2719:2016+A1:2021 Determination of flash point. Pensky-Martens closed cup method
- 20/30411249 DC BS EN ISO 2719 AMD 1. Determination of flash point. Pensky-Martens closed cup method
- BS 2000-35:1993 Methods of test for petroleum and its products - Determination of open flash and fire point - Pensky-Martens method
- BS EN 60601-2-66:2013 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- BS EN 60601-2-66:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- BS EN IEC 80601-2-26:2020 Medical electrical equipment - Particular requirements for the basic safety and essential performance of electroencephalographs
German Institute for Standardization, The basics of the flash point meter
- DIN EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
- DIN EN ISO 3679:2023-03 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022); German version EN ISO 3679:2022
- DIN EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016); German version EN ISO 2719:2016
- DIN EN IEC 62858:2021 Lightning density based on lightning location systems (LLS) - General principles (IEC 62858:2019); German version EN IEC 62858:2019
- DIN EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013); German version EN ISO 13736:2013
- DIN 51755:1974-03 Testing of Mineral Oils and Other Combustible Liquids; Determination of Flash Point by the Closed Tester according to Abel-Pensky
- DIN EN ISO 18778:2023-02 Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors (ISO 18778:2022); German version EN ISO 18778:2022
SE-SIS, The basics of the flash point meter
American Society for Testing and Materials (ASTM), The basics of the flash point meter
- ASTM D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-15 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D6450-99 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D93-06 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-13 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-13e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D3828-05 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D93-02 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D3828-12a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D93-20 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
- ASTM D56-70 Standard Method Of Test For Flash Point By Tag Closed Tester
- ASTM D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
- ASTM D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester
- ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D56-87 Standard Test Method for Flash Point by Tag Closed Tester
- ASTM D56-93 Standard Test Method for Flash Point by Tag Closed Tester
- ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
- ASTM D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM D7094-04 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D7094-04(2009) Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D7094-17 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D7094-17a Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM D6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup 40;CCCFP41; Tester
- ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
- ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
- ASTM D7094-12e1 Standard Test Method for Flash Point by Modified Continuously Closed Cup 40;MCCCFP41; Tester
- ASTM D93-07 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-11 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D93-12 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
YU-JUS, The basics of the flash point meter
- JUS H.P8.501-1983 Testing of pesticides. Determination for flash point by Pensky-Martens closed tester
- JUS Z.C0.007-1978 Classification pf theflammable and combustible liquids according to theflach and the boiling point
ES-UNE, The basics of the flash point meter
- UNE-EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022, Corrected versión 2023-05)
- UNE-EN ISO 2719:2017 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
- UNE-CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing (Endorsed by Asociación Española de Normalización in July of 2019.)
- UNE-EN ISO 2719:2017/A1:2021 Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
- UNE-EN ISO 18778:2022 Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors (ISO 18778:2022) (Endorsed by Asociación Española de Normalización in January of 2023.)
TH-TISI, The basics of the flash point meter
- TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup
- TIS 1798-2005 Determination of flash point.pensky.martens closed cup method
VN-TCVN, The basics of the flash point meter
- TCVN 2641-2008 Animal and vegetable fats and oils.Flashpoint limit test using Pensky-Martens closed cup flash tester
- TCVN 2693-2007 Petroleum Products.Test methods for determination of flash point by Pensky-Martens closed cup tester
- TCVN 4057-1985 System of quality characteristics of construction products.Basic principles
AENOR, The basics of the flash point meter
- UNE 51024:1987 PETROLEUM PRODUCTS. DETERMINATION OF FLASH POINT. ABEL-PENSKY CLOSED TESTER
- UNE-EN 924:2003 Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint
Association Francaise de Normalisation, The basics of the flash point meter
- NF M07-019:2003 Determination of flash point - Pensky-Martens closed cup method.
- NF EN ISO 2719/A1:2021 Détermination du point d'éclair - Méthode Pensky-Martens en vase clos - Amendement 1 : correction concernant les thermomètres
- NF ISO 15267:1998 Corps gras d'origines animale et végétale - Détermination du point d'éclair avec la méthode Pensky-Martens en vase clos
- NF EN ISO 18778:2022 Matériel respiratoire - Exigences particulières relatives à la sécurité de base et aux performances essentielles des moniteurs cardiorespiratoires pour nourrissons
Korean Agency for Technology and Standards (KATS), The basics of the flash point meter
- KS M ISO 2719-2017(2022) Determination of flash point — Pensky-Martens closed cup method
- KS C IEC 60601-2-66-2017(2022) Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- KS C IEC 60601-2-66:2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
国家市场监督管理总局、中国国家标准化管理委员会, The basics of the flash point meter
- GB/T 261-2021 Determination of flash point—Pensky-Martens closed cup method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The basics of the flash point meter
- GB/T 261-2008 Determination of flash point.Pensky-Martens closed cup method
- GB 21748-2008 Safety requirements for the educational equipment.Basic requirements for equipment and spare parts
- GB/T 15406-1994 Primary parameters and general technical specifications for geotechnical apparatus
AASHTO - American Association of State Highway and Transportation Officials, The basics of the flash point meter
- T73-1989 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester
- T 73-2003 Standard Method of Test for Flash Point by Pensky-Martens Closed Cup Tester (ASTM Designation: D 93-02a; No Replacement)
Professional Standard - Commodity Inspection, The basics of the flash point meter
- SN/T 3207-2012 Inspection rules for import and export dangerous chemical products.Low flash point flammable liquids.General requirement
- SN/T 3208-2012 Inspection rules for import and export dangerous chemical products.Middle flash point flammable liquids.General requirement
- SN/T 3209-2012 Inspection rules for import and export dangerous chemical products.High flash point flammable liquids.General requirement
- SN/T 2939-2011 Pensky-Martin Closed Cup Method for Determination of Flash Point of Petroleum Products
RU-GOST R, The basics of the flash point meter
- GOST R 53717-2009 Petroleum products. Test method for flash point by Tag closed cup tester
- GOST ISO 2719-2013 Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup
- GOST R 59683-2021 Petroleum products. Standard test methods for flash point by continuously closed cup tester
- GOST R 54279-2010 Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup tester
Group Standards of the People's Republic of China, The basics of the flash point meter
- T/CEC 357-2020 General technical specification for flashover locator based on ultrasonic method
CZ-CSN, The basics of the flash point meter
- CSN 65 6064-1981 Petroleum products. Determination of lash point. Pensky-Martens closed cup ethod
- CSN 25 4710-1969 Checking instruments for spur gears. asic technical requirements
- CSN 25 7502-1966 Dosing volumetric measuring apparatuses for liquids. Basic regulations
Danish Standards Foundation, The basics of the flash point meter
- DS/EN 924:2003 Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint
- DS/EN 22719:1994 Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method
Lithuanian Standards Office , The basics of the flash point meter
- LST EN 924-2003 Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint
GOSTR, The basics of the flash point meter
- GOST ISO 2719-2017 Oil products and other liquils. Determination of flash point. Pensky-Martens closed cup methods
- GOST 33192-2014 Petroleum products and other liquids. Method for determination of flash point by tag closed cup tester
CEN - European Committee for Standardization, The basics of the flash point meter
- PD CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing
AT-ON, The basics of the flash point meter
- ONORM EN 57-1987 Petroleum products; determination of flash-point; Abel-Pensky closed tester
HU-MSZT, The basics of the flash point meter
American National Standards Institute （ANSI), The basics of the flash point meter
CL-INN, The basics of the flash point meter
International Organization for Standardization (ISO), The basics of the flash point meter
- ISO 2719:1988 Petroleum products and lubricants; determination of flash point; Pensky-Martens closed cup method
ES-AENOR, The basics of the flash point meter
PL-PKN, The basics of the flash point meter
United States Navy, The basics of the flash point meter
International Electrotechnical Commission (IEC), The basics of the flash point meter
- IEC 60601-2-66:2015 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KR-KS, The basics of the flash point meter
- KS C IEC 60601-2-66-2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
RO-ASRO, The basics of the flash point meter
- STAS 11051/4-1989 SUSPENDED SPOT WELDING iMACHINES WITH INCORPORATED TRANSFORMER Basic parameters-