ZH
RU
ES

temperature at tg

temperature at tg, Total:394 items.

In the international standard classification, temperature at tg involves: Water quality, Fluid storage devices, Measurement of time, velocity, acceleration, angular velocity, Thermodynamics and temperature measurements, Packaging and distribution of goods in general, Plastics, Rubber, Powder metallurgy, Welding, brazing and soldering, Pipeline components and pipelines, Materials for aerospace construction, Electricity. Magnetism. Electrical and magnetic measurements, Test conditions and procedures in general, Aerospace electric equipment and systems, Metrology and measurement in general, Medical sciences and health care facilities in general, Analytical chemistry, Reinforced plastics, Nuclear energy engineering, Insulating materials, Products of the textile industry, Non-destructive testing, Industrial automation systems, Refractories, Road vehicles in general, Ferrous metals, Paints and varnishes, Adhesives, Products of the chemical industry, Equipment for petroleum and natural gas industries, Construction materials, Road engineering, Electrical wires and cables, Leather technology, Inorganic chemicals, Lubricants, industrial oils and related products, Raw materials for rubber and plastics, Wood-based panels, Protection against fire, Environmental testing, Measurement of fluid flow, Protection of and in buildings, Gears, Vibrations, shock and vibration measurements, Electrical engineering in general, Optics and optical measurements, Cellular materials, Structure and structure elements, Fasteners for aerospace construction, Measurement of volume, mass, density, viscosity, Road vehicle systems, Aerospace fluid systems and components, Fertilizers, Materials and articles in contact with foodstuffs, Ceramics, Electrical equipment for working in special conditions, Refrigerating technology.

CZ-CSN, temperature at tg

CSN ON 25 8012-1964
CSN 64 0768-1982 Determination of time - emperature limits
CSN 34 6552 Cast.3-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 312
CSN 34 6552 Cast.1-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 042
CSN 64 0533-1993 Plastics. Determination of Polypropylene Solubility in P-xylene at Standard Temperature of 23 °C
CSN 34 6551 Cast.1-1976 Insulating tubings and sleevings u?ed at temperatures below 90 °C, Type 041
CSN 35 0019 Cast.09-1979 Rotating electrical machines. Methods for determining increase of temperaturein dependence on the time with locked rotor

RU-GOST R, temperature at tg

GOST 21727-1976 Water. Viscosity of water at 20 °C
GOST R IEC 811-5-1-1995 Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at temperature 23 °C. D.c. resistivity at temperature 23 °C and 1
GOST 8.188-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to
GOST 16783-1971 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST ISO 8130.6-2002 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
GOST 16783-2017 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST ISO 8130-6-2002 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
GOST 30501-1997 Solid electrical insulating materials. Method of measuring electrical resistance and resistivity at elevated temperatures
GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GOST 8.499-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of illumination effective time of exposure and colour temperature in sensitometry
GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GOST R ISO 18437-6-2021 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 6. Method of time-temperature superposition
GOST R IEC 60331-11-2012 Tests for electric and optical cables under fire conditions. Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C
GOST R IEC 60331-11-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C

International Organization for Standardization (ISO), temperature at tg

ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3: Glass transition temperature (Tg)
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 471:1977 Title missing - Legacy paper document
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
ISO 2578:1993 Plastics; determination of time-temperature limits after prolonged exposure to heat
ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods
ISO 3384-2:2012 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
ISO 3213:1975 Polypropylene pipes; Reduction of permissible stress as a function of time and temperature
ISO 3380:2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 124:1997/Amd 2:2008 Latex, rubber - Determination of total solids content - Amendment 2: Determination at temperatures higher than 105 °C
ISO 9396:1989 Plastics; phenolic resins; determination of the gel time at a given temperature using automatic apparatus
ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-6:1992 Coating powders; part 6: determination of gel time of thermosetting coating powders at a given temperature
ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO/TR 2799:1978 Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load
ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 8130-6:1992/Amd 1:1998 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1
ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
ISO 13791:2004 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures

British Standards Institution (BSI), temperature at tg

BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80C
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
19/30388641 DC BS ISO 4664-3. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Part 3. Glass transition temperature (Tg)
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
BS EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
BS EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS EN 14257:2019 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS EN ISO 2578:1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat
BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
BS EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
BS EN ISO 8130-6:1998 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
BS EN ISO 8130-6:2010 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS ISO 18437-6:2017 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials - Time-temperature superposition
BS EN ISO 11357-6:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 8130-6:2021 Tracked Changes. Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
19/30383995 DC BS EN ISO 8222. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
BS EN 2155-13:1993 Test methods for transparent materials for aircraft glazing - Determination of temperature at deflection under load
BS EN 2997-001:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Technical specification
22/30461615 DC BS EN 17925. Soil improvers and growing media. Determination of temperature and time profile during composting and digestion
BS EN 2997-011:2010 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Dummy receptacle - Product standard
BS EN 2997-008:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Plug - Product standard
BS EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
20/30419391 DC BS EN ISO 8130-6. Coating powders. Part 6. Determination of gel time of thermosetting coating powders at a given temperature
BS EN 2997-011:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Dummy receptacle - Product standard
BS EN 2997-010:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Protective cover for plug - Product standard
BS EN 2997-002:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Specification of performance and contact arrangements
BS EN 50281-2-1:1999 Electrical apparatus for use in the presence of combustible dust. Test methods. Methods of determining minimum ignition temperatures
BS EN 2997-009:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Protective cover for receptacle - Product standard
BS EN 2997-005:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Hermetic square flange receptacle - Product standard
BS EN 2997-003:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Square flange receptacle - Product standard
BS EN 2997-002:2012 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Specification of performance and contact and contact ar
BS EN 2997-005:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic square flange receptacle. Product standard
BS EN 2997-002:2016 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Specification of performance and contac
BS EN 2997-004:2006 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Jam-nut mounted receptacle - Product standard
BS EN 2997-003:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Square flange receptacle
BS EN ISO 13791:2012 Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures

American Society for Testing and Materials (ASTM), temperature at tg

ASTM F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96 Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2014) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators
ASTM E307-72(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D6207-97(2003) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03(2007) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D2219-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60176C Operation
ASTM D2219-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 ��C Operation
ASTM E307-72(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E918-83(2005) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM D4498-07(2015) Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D7426-08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7426-08 Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
ASTM D4311-96 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D4311/D4311M-15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D4683-10 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00B0;C
ASTM D7361-07(2018) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
ASTM D7247-07 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7247-07a Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM E918-83(1999) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
ASTM D7247-07ae1 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D5540-13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
ASTM D4684-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM A338-84(2004) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650176F (345176C)
ASTM D6896-14 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D6992-03(2009) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-03 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-16 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-03(2015) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

ESDU - Engineering Sciences Data Unit, temperature at tg

ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.
ESDU 89025-1989 Thermal stresses in unrestrained plates subjected to a recovery temperature varying linearly with time.
ESDU 89024-1989 Resultant forces and moments in completely restrained plates subjected to a recovery temperature varying linearly with time.

Association of German Mechanical Engineers, temperature at tg

VDI/VDE 3522-1987 Time response of contact thermometers
DVS 2201-1 Beiblatt 5-2006 Service life temperature time limits due to thermal ageing
VDI/VDE 3522 Blatt 2-2014 Dynamic behaviour of contact thermometers - Experimental determination of time percentage values

Association Francaise de Normalisation, temperature at tg

NF T46-026-3*NF ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3 : glass transition temperature (Tg)
NF ISO 4664-3:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination des propriétés dynamiques - Partie 3 : température de transition vitreuse (Tg)
NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF EN ISO 2578:1998 Plastiques - Détermination des limites temps-températures après exposition à l'action prolongée de la chaleur
NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
NF T76-135*NF EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
XP S31-018-1*XP ISO/TS 13471-1:2017 Acoustics - Temperature influence on tyre/road noise measurement - Part 1 : correction for temperature when testing with the CPX method
NF M08-005:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks.
NF T30-506:1981 Thermosetting powder paints. Determination of the gel time at a given temperature.
NF T20-555:1989 Hydrogen peroxide for industrial use. Determination of amount of decomposition rate after 16 H at 96 degrees C.
NF T76-113:1983 Water adhesives. Aminoplastic. Determination of conventional gel time at different temperatures.
NF T77-103:1986 Basic silicones for industrial use. Determination of gel time at a given temperature. Plate method.
NF T51-429:1995 Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus.
NF T46-045:1986 Rubber vulcanized. Determination of temperature rise and resistance to fatigue in compression flexometer testing.
NF T76-113:2021 Water-based adhesives - Aminoplastics - Conventional determination of gel setting time at different temperatures
NF P50-762:2005 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - simplified methods.
NF EN ISO 8130-6:2021 Poudres pour revêtement - Partie 6 : détermination du temps de gélification à une température donnée de poudres thermodurcissables
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T30-499-6:2011 Coating powders - Part 6 : determination of gel time of thermosetting coating powders at a given temperature.
UTE C46-407U*UTE C46-407:1989 Provisional requirements. Industrial-process measurement and control. Four wire temperature converters-transmitters, with adjustable configuration.
NF T30-499-6*NF EN ISO 8130-6:2021 Coating powders - Part 6 : determination of gel time of thermosetting coating powders at a given temperature
NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
NF T77-109:1986 Basic silicones for industrial use. Determination of gel time at a given temperature. Method using automatic equipment with rotary motion.
NF EN ISO 11357-5:2014 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5 : détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation
UTE C46-406U*UTE C46-406:1985 Provisional requirements. Industrial-process measurement and control. Temperature and physical quantities indicators with adjustable configuration.
NF UTE C46-407:1989 Prescriptions provisoires - Mesure et commandes dans les processus industriels - Convertisseurs-transmetteurs de températures, configurables, à 4 fils
NF A03-178:1991 Steel products for pressure purposes - Derivation and verification of elevated temperature properties - Part 3:An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
NF C46-202:1988 Provisional prescriptions Industrial Process Measurement and Control Temperature sensors using platinum resistors Quality Assessment Prescriptions
NF C46-407:1989 Provisional Requirements Industrial-Process Measurement and Control Four Wire Temperature Converters-Transmitters,With Adjustable Configuration
NF T77-107:1986 Basic silicones for industrial use. Determination of gel time at a given temperature. Method using automatic equipment with alternate motion.
UTE C46-201U*UTE C46-201:1985 Provisional prescriptions. Industrial process measurement and control. Temperature sensors using thermocouples. Quality assessment prescriptions.
UTE C46-202U*UTE C46-202:1988 Provisional prescriptions. Industrial process measurement and control. Temperature sensors using platinum resistors. Quality assessment prescriptions.
NF C46-408:1989 Provisional Requirements Industrial-Process Measurement and Control Cabinet Mounted Two Wire Temperature Converters-Transmitters,With Adjustable Configuration
NF P50-751:2005 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures.
UTE C46-408U*UTE C46-408:1989 Provisional requirements. Industrial-process measurement and control. Cabinet mounted two wire temperature converters., transmitters, with adjustable configuration.
NF UTE C46-408:1989 Prescriptions provisoires - Mesure et commande dans les processus industriels - Convertisseurs-transmetteurs de températures, pour montage en armoire, "2 fils", configurables
NF L54-143-014:2011 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 014 : square flange receptacle with integrated
NF P50-751:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
NF E18-152:2000 Central acquisition systems of time/temperature values for storage and distribution of chilled, frozen refrigerated, quick-frozen foodstuffs and ice creams - Technical requirements.
NF UTE C46-409:1991 Prescriptions provisoires - Mesure et commande dans les processus industriels - Régulateurs indicateurs configurables de température et de grandeurs physiques, à sorties discontinues

Korean Agency for Technology and Standards (KATS), temperature at tg

KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS C IEC 61224:2012 Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
KS M ISO 3384:2007 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS M ISO 3384:2014 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS D 0411-2012 Method for determination of apparent density at elevated temperatures for powder mixes intended for warm compacting
KS B 0713-18-2001 Methods for the calibration of vibration and shock pick-ups-Part 18:Testing of transient temperature sensitivity
KS M ISO 8222:2003 Petroleum measurement systems-Calibration-Temperature corrections for use when calibrating volumetric proving tanks
KS C IEC 61224-2012(2022) Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
KS C IEC 61224-2012(2017) Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
KS M ISO 8222:2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 3380:2004 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
KS M ISO 2578:2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 8130-6:2008 Coating powders-Part 6:Determination of gel time of thermosetting coating powders at a given temperature
KS M ISO 8130-6:2016 Coating powders－Part 6：Determination of gel time of thermosetting coating powders at a given temperature
KS M ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 8130-6:2021 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

KR-KS, temperature at tg

KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 8130-6-2016 Coating powders－Part 6：Determination of gel time of thermosetting coating powders at a given temperature
KS M ISO 11357-6-2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS M ISO 8130-6-2021 Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature

German Institute for Standardization, temperature at tg

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN ISO/TS 13471-1:2022-01 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method (ISO/TS 13471-1:2017)
DIN EN ISO 2535:2003-02 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
DIN EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2002); German version EN ISO 3380:2002
DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018
DIN EN ISO 8130-6:2021-10 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021); German version EN ISO 8130-6:2021
DIN EN 17925:2022-11 Soil improvers and growing media - Determination of temperature and time profile during composting and digestion; German and English version prEN 17925:2022 / Note: Date of issue 2022-10-21
DIN EN 17925:2022 Soil improvers and growing media - Determination of temperature and time profile during composting and digestion; German and English version prEN 17925:2022
DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
DIN ISO 10502:1997 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992)
DIN EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
DIN 43735:2011 Process control technology - Electrical temperature sensors - Replaceable inserts for RTDs and thermocouples
DIN EN ISO 8130-6:2020 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO/DIS 8130-6:2020); German and English version prEN ISO 8130-6:2020
DIN EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2015); German version EN ISO 3380:2015
DIN EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008); German version EN ISO 11357-6:2013

Malaysia Standards, temperature at tg

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., temperature at tg

ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities
ASHRAE DA-07-068-2007 The effects of thermostat Setback and Setup on Seasonal Energy Consumption@ Surface Temperatures@ and Recovery Times at the CCHT Twin House Research Facility
ASHRAE 4216-1998 Identification of Mixing Effects in Stratified Chilled-Water Storage Tanks by Analysis of Time Series Temperature Data

国家市场监督管理总局、中国国家标准化管理委员会, temperature at tg

GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures

Institute of Interconnecting and Packaging Electronic Circuits (IPC), temperature at tg

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability
IPC TR-465-2-1993 Effect of Steam Aging Time and Temperature on Solderability Test Results

Danish Standards Foundation, temperature at tg

DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature
DS/EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
DS/EN ISO 9396:2000 Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus
DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DS/EN ISO 8130-6:2011 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
DS/ISO 8130-6:2021 Coating powders – Part 6: Determination of gel time of thermosetting coating powders at a given temperature
DS/EN ISO 8130-6:2021 Coating powders – Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
DS/EN 2155-13:1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 13: Determination of temperature at deflection under load

Society of Automotive Engineers (SAE), temperature at tg

SAE AMS7287-2012 Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydraulic Systems
SAE AS4851A-2005 Relative Thermal Life and Temperature Index for Insulated Electric Wire
SAE AMS7361A-2022 Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems
SAE AMS7287A-2022 Fluorocarbon Elastomer (FKM) High Temperature/HTS Oil Resistant/Fuel Resistant Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C), for Seals in Oil/Fuel/Specific Hydraulic Systems
SAE AMS3353-2009 Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40°F (-40°C)for Elastomeric Parts in Aircraft Engine Oil, Fuel and Hydraulics Systems
SAE AMS7379A-2020 Rubber: Fluorocarbon Elastomer (FKM) Low Temperature Sealing Tg -40 °F (-40 °C) 70 to 80 Type ‘A’ Hardness For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
SAE AMS7379-2008 Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 °F (-40 °C) for Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
SAE AMS3384-2013 Rubber, Fluorocarbon Elastomer (FKM), 70 to 80 Hardness, Low Temperature Sealing Tg -22°F (-30°C), For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems
SAE AMS3353A-2023 Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems
SAE AMS7410-2021 Rubber: Fluorocarbon Elastomer (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Shore Type A Hardness Low Temperature Sealing Tg -47 °F (-43.9 °C) for Elastomeric Seals in Aircraft Engine, Fuel and Hydraulic Systems
SAE AMS5337D-2007 Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated UNS J93150

未注明发布机构, temperature at tg

BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
IPC TR-465-2 Effect of Steam Aging Time and Temperature on Solderability Test Results

BE-NBN, temperature at tg

NBN-EN 24672-1993 Rubber and plastics hoses. Sub-ambiant temperature flexibility tests (ISO 4672:1988)
NBN T 03-165-1980 Sodium chloride for industrial use - Détermination of the loss of mass at 110 °C
NBN T 03-171-1980 Sodium sulphate for industrial use - Determination of loss in mass at 110 °C
NBN-EN 27243-1994 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)(ISO 7243:1989)

American National Standards Institute （ANSI), temperature at tg

ANSI/IEEE 738:2006 Standard for Calculating the Current-Temperature of Bare Overhead Conductors
ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
ASTM D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6992-16(2023) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ANSI/ASTM D2520:2013 New Standard Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures of 1650 C

PL-PKN, temperature at tg

PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PN BN 6091-10-1964
PN C89082-14-1986 Unsaturated polyester resins Methods of testing Determination of maximum temperatur? and the time of increase of temperatur? to maximum temperatur? during copolymerization at temperatur? 25 and 80°C
PN C89082-15-1987 Unsaturated polyester resins Methods of testing Determination of gel time after adding of initiation system at temperatur?25 and 80° C

Lithuanian Standards Office , temperature at tg

LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
LST EN ISO 2535:2003 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001)
LST EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
LST EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
LST EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
LST EN ISO 8130-6:2011 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amd.1:1998)

AENOR, temperature at tg

UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
UNE-EN ISO 2535:2003 Plastics-Unsaturated polyester resins- Measurement of gel time at ambient temperature. (ISO 2535:2001)
UNE-EN ISO 8222:2003 Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
UNE-EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus. (ISO 9396:1997)
UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
UNE-EN ISO 8130-6:2011 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amd 1:1998)

Group Standards of the People's Republic of China, temperature at tg

T/JLA 004-2023 Calibration method for temperature and time parameters of washer-disinfector
T/CAME 37-2021 Technical requirement of temperature and humidity real-time monitoring system for baby incubator

RO-ASRO, temperature at tg

STAS 10551-1976 UNSATURATED POLYESTER RESINS Determination of the maximum temperature and the rate of increase of temperature during the setting at 80°C
STAS 145/26-1978 VEGETABLE OILS AND FATS Behaviour determination of technical oils at polymerization temperature
STAS 11496-1981 MINERAL OILS FOR MOTOR VEHICLES TRANSMISSION GEAR Determination of apparent viscosity at low temperatures -with Brook field viscosimeter
STAS SR ISO 8130-6:1992 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription

ZA-SANS, temperature at tg

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
SANS 3380:2010 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C

CL-INN, temperature at tg

INDITECNOR 20-102

API - American Petroleum Institute, temperature at tg

API 4063 VOL I-1969 TIME-TEMPERATURE HISTORIES OF SPECIFIED FUEL SYSTEMS VOLUME I
API TR 10TR3-1999 Technical Report on Temperatures for API Cement Operating Thickening Time Tests; 1993 Report from the API Task Group on Cementing Temperature Schedules (First Edition)

European Committee for Standardization (CEN), temperature at tg

EN 1252-1:1998/AC:1998 Cryogenic Vessels - Materials - Part 1: Toughness Requirements for Temperatures Below - 80 Degrees C Ratified European Text
EN 1252-1:1998 Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 °C (Incorporating corrigendum December 1998)
EN ISO 2578:1998 Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat
EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
prEN 127-1-1980 CEN-heating boiler standard for boilers with operating temperature up to 100 C
EN ISO 9396:1995 Plastics - Phenolic Resins - Determination of the Gel Time at a Given Temperature Using Automatic Apparatus (ISO 9396 : 1989)
EN ISO 3380:2002 Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 degrees C ISO 3380: 2002
EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
EN ISO 9396:2000 Plastics - Phenolic Resins - Determination of the Gel Time at a Given Temperature Using Automatic Apparatus ISO 9396: 1997
EN ISO 8130-6:2010 Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
EN 2997-003:2012 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 003: Square flange receptacle - Product standar
EN 2997-005:2012 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Produc
EN 6059-504:2014 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures

IN-BIS, temperature at tg

IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces
IS 9000 Pt.14/Sec.1-1988

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature at tg

GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
GB/T 7142-2002 Determination of time-temperature limits for plasties after prolonged exposure to heat
GB/T 16995-1997 Determination of gel time of thermosetting powder coatings at a given temperature
GB/Z 22559.1-2008 Gears.Thermal capacity.Part 1:Rating gear drivers with thermal equilibrium at 95℃ sump temperature
GB/T 19466.6-2009 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)
GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

YU-JUS, temperature at tg

JUS G.S2.640-1991 Plastics and abonite.Determination of temperature of deflection under load
JUS G.S3.104-1991 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions
JUS N.C7.112-1984 VVinding wires. Enamelled round copper wires, with two types of enamel insulation, self-fluxing at in- creased tempera tu res. Technical requirement? for manu factu ring.

PT-IPQ, temperature at tg

IPC - Association Connecting Electronics Industries, temperature at tg

IPC TR-585 CD-2006 Time@ Temperature and Humidity Stress of Final Board Finish Solderability

Standard Association of Australia （SAA）, temperature at tg

AS 1683.20:2001 Methods of test for rubber - Standard temperatures, humidities and times for conditioing and testing
AS 1774.12:2001 Refractories and refractory materials - Physical test methods - Refractoriness under load - Temperatures of deformation at constant load with rising temperature

HU-MSZT, temperature at tg

MSZ KGST 893-1978

CH-SNV, temperature at tg

VSM 18725.2-1965
SN EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

ES-AENOR, temperature at tg

Professional Standard - Machinery, temperature at tg

JB/T 9233.7-1999 General methods of testing the performance of industrial process measurement and control instruments.Transient temperature effect

Japanese Industrial Standards Committee (JISC), temperature at tg

JIS K 6795:1998 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
JIS K 7226:1998 Plastics -- Determination of time-temperature limits after prolonged exposure to heat

Professional Standard - Energy, temperature at tg

NB/T 20338-2015 In situ measurements for response time of resistance temperature detectors important to safety in nuclear power plants

Taiwan Provincial Standard of the People's Republic of China, temperature at tg

CNS 5850-1980 Reduction of Permissible Strees as a Function of Time and Temperature for Polypropylene Pipes
CNS 12565-1989 Basic Environmental Testing Procedures Part 2: Tests, Test D_b: Damp Heat, Cycle (12+12-Hour Cycle)

IT-UNI, temperature at tg

UNI 5306-1963
UNI 5305-1963
UNI EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature

BR-ABNT, temperature at tg

ABNT EB-360-1973

International Electrotechnical Commission (IEC), temperature at tg

IEC 61224:1993 Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements
IEC 61034-1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2019 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

American Society of Mechanical Engineers (ASME), temperature at tg

ASME SEC III D1 NH NMA T-2003 Appendix T Rules for Strain, Deformation, and Fatigue Limits at Elevated Temperatures
ASME SEC VIII D2 NMA APP C-2001 Appendix C - Nonmandatory Suggested Methods for Obtaining the Operating Temperatures of Vessel Walls in Service
ASME N-373-2-2001 Alternative PWHT Time at Temperature for P-No. 5A or 5B Material, Classes 1, 2, and 3 Section III, Division 1
ASME SEC II A SA-962/SA-962M-2001 Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range ASTM A962/A962M-99

GB-REG, temperature at tg

REG NASA-TP-1569-1979 Wear, friction, and temperature characteristics of an aircraft tire undergoing braking and cornering

SE-SIS, temperature at tg

SIS 18 60 12 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.

CEN - European Committee for Standardization, temperature at tg

EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100° C
EN 2997-003:2006 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures -65°C to 175°C continuous@ 200°C continuous@ 260°C peak - Part 003: Square flange receptacle - Product standard
EN 2997-005:2006 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures -65°C to 175°C continuous@ 200°C continuous@ 260°C peak - Part 005: Hermetic square flange receptacle - Product sta
EN ISO 13791:2004 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures

Professional Standard - Chemical Industry, temperature at tg

HG/T 2756-1996 Determination of Gel Time of Phenolic Resin at a Given Temperature Using an Automatic Measuring Apparatus

Professional Standard - Electron, temperature at tg

SJ/T 11042-1996 Test method for temperature (Tk-100) of electronic glass with volume resistivity of 100MΩ·cm

国家林业局, temperature at tg

LY/T 2881-2017 Method for determination of oxidation induction time and oxidation induction temperature of wood-plastic composite materials

Canadian General Standards Board （CGSB), temperature at tg

CGSB 1-GP-71 METH 31.3-1982 Methodes D'Essai Des Peintures Et Pigments Stabilite A Basse Temperature Stabilite A -20 Degrees C

ES-UNE, temperature at tg

UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
UNE-EN ISO 8130-6:2022 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, temperature at tg

JEDEC JESD202-2006 Method for Characterizing the Electromigration Failure Time Distribution of Interconnects Under Constant-Current and Temperature Stress

Electronic Components, Assemblies and Materials Association, temperature at tg

ECA SP 5156-2007 Temperature Life With or Without Electrical Load Test Procedure for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-17C

National Metrological Verification Regulations of the People's Republic of China, temperature at tg

JJG 285-1993 Verification Regulation of Moving Coil Temperature Indicating Instrument with Time Proportional or PID Action

DE-VDA, temperature at tg

VDA 220-2005

National Aeronautics and Space Administration (NASA), temperature at tg

NASA-TN-D-2280-1964 EXPERIMENTAL LOCAL HEAT-TRANSFER AND AVERAGE FRICTION DATA FOR HYDROGEN AND HELIUM FLOWING IN A TUBE AT SURFACE TEMPERATURES UP TO 5600° R

SAE - SAE International, temperature at tg

SAE AMS5337B-1995 Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated UNS J93150
SAE AMS5337E-2017 Steel@ Maraging@ Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized@ Overaged@ and Solution Heat Treated (UNS J93150)

AT-ON, temperature at tg

OENORM EN ISO 8130-6:2021 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

VE-FONDONORMA, temperature at tg

NORVEN 75-29-1968

IECQ - IEC: Quality Assessment System for Electronic Components, temperature at tg

PQC 74-1987 Radio Frequency Cables for Use in Electrotechnical Equipment: Blank Detail Specification: Flexible Radio Frequency Cables for Operation at a Maximum Center Conductor Temperature of 85 Degrees C Assessment Level U