ZH
RU
ES

Spectral Tolerance

Spectral Tolerance, Total:293 items.

In the international standard classification, Spectral Tolerance involves: Fibre optic communications, Linear and angular measurements, Iron and steel products, Medical equipment, Fasteners for aerospace construction, Vocabularies, Technical drawings, Optical equipment, Analytical chemistry, Solar energy engineering, Paints and varnishes, Materials for aerospace construction, Graphic technology, Electronic components in general, Cutting tools, Shafts and couplings, Road engineering.

British Standards Institution (BSI), Spectral Tolerance

BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
BS EN ISO 18369-2:2012 Ophthalmic optics. Contact lenses. Tolerances
BS EN 10278:1999 Dimensions and tolerances of bright steel products
BS EN ISO 18369-2:2017 Tracked Changes. Ophthalmic optics. Contact lenses. Tolerances
BS ISO 10110-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Surface imperfection tolerances
BS ISO 10110-5:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Surface form tolerances
BS ISO 10110-11:1996 Optics and photonics - Preparation of drawings for optical elements and systems - Non-toleranced data
BS ISO 10110-14:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Wavefront deformation tolerance
BS ISO 8255-1:2011 Microscopes. Cover glasses. Dimensional tolerances, thickness and optical properties
BS ISO 10110-6:2015 Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems. Centring tolerances
BS ISO 10110-6:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Centring tolerances
BS ISO 10110-5:2015 Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems. Surface form tolerances

Association Francaise de Normalisation, Spectral Tolerance

NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF A47-461*NF EN 10278:1999 Dimensions and tolerances of bright steel products
NF S11-813-2:2006 Ophthalmic optics - Contact lenses - Part 2 : tolerances.
NF S11-813-2:2013 Ophthalmic optics - Contact lenses - Part 2: tolerances
NF S11-813-2*NF EN ISO 18369-2:2017 Ophthalmic optics - Contact lenses - Part 2 : tolerances
NF EN ISO 18369-2:2017 Optique ophtalmique - Lentilles de contact - Partie 2 : tolérances
NF S10-008-5:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances.
NF S10-008-5*NF ISO 10110-5:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5 : surface form tolerances
NF ISO 10110-6:2015 Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 6 : tolérances de centrage
NF S10-008-6*NF ISO 10110-6:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6 : centring tolerances
NF S10-008-11*NF ISO 10110-11:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 11 : Non-toleranced data
NF S10-008-6:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 6 : centring tolerances.
NF ISO 10110-5:2015 Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 5 : tolérances de forme de surface
NF S10-008-11:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 11 : non-toleranced data.
NF S10-008-14*NF ISO 10110-14:2018 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14 : wavefront deformation tolerance
NF E22-120:1992 Relief grooves for shouldered cylindrical workpiece grinding. Dimensions and tolerances.
NF S10-008-14:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14 : wavefront deformation tolerance.
NF S10-008-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7 : surface imperfection tolerances.
NF S10-008-5:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 5 : surface form tolerances.
NF S10-008-7:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 7 : surface imperfection tolerances.
NF F18-102:1990 Railway rolling stock. Roller bearing axle boxes for outside axle journals. Tolerances. Surface finish.
NF EN 2236:1992 Série aérospatiale - Axes lisses à tête, tige à tolérance serrée, en acier allié - Spécification technique.

European Committee for Electrotechnical Standardization（CENELEC）, Spectral Tolerance

EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser

RU-GOST R, Spectral Tolerance

GOST 13810-1968 Plain gauges for dimensions over 500 mm. Tolerances
GOST 24853-1981 Plain gauges for dimensions to 500 mm. Tolerances
GOST 24852-1981 Plain ganges for dimensions over 500 to 3150 mm. Tolerances
GOST 5939-1951 Plain limit gauges for holes less than 1 mm. Tolerances

German Institute for Standardization, Spectral Tolerance

DIN 6880:2011-06 Bright key steel - Dimensions, tolerances, mass
DIN EN 10278:1999 Dimensions and tolerances of bright steel products; German version EN 10278:1999
DIN EN 10278:1999-12 Dimensions and tolerances of bright steel products; German version EN 10278:1999 / Note: To be replaced by DIN EN 10278 (2022-02).
DIN 28007-2:2017-04 General tolerances for columns - Part 2: Glass lined columns
DIN EN ISO 18369-2:2018-04 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017); German version EN ISO 18369-2:2017
DIN ISO 10110-5 Bb.1:2003 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances; Surface form tolerance inspection using testing glasses
DIN ISO 10110-6:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:2015)
DIN ISO 10110-6:2016-06 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:2015)
DIN 59370:2022 Bright steel sharp-edged leg angles - Dimensions, mass, tolerances on dimensions and shape
DIN EN ISO 18369-2:2006 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2006); English version of DIN EN ISO 18369-2:2006-11
DIN 59370:2022-01 Bright steel sharp-edged leg angles - Dimensions, mass, tolerances on dimensions and shape
DIN EN 10278:2022-02 Dimensions and tolerances of bright stainless and other cold drawn steel products; German and English version prEN 10278:2022 / Note: Date of issue 2022-01-07*Intended as replacement for DIN EN 10278 (1999-12).
DIN ISO 10110-6:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:1996)
DIN ISO 10110-11:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:1996)
DIN ISO 10110-14:2019-09 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2018)
DIN ISO 10110-5:2016-04 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:2015)
DIN 58170-54:1980 Inscription of dimensions and tolerances for optical systems; blemishes
DIN 59370:2008 Bright steel sharp-edged equal leg angles - Dimensions, mass, tolerances on dimensions and shape

European Committee for Standardization (CEN), Spectral Tolerance

EN 10278:1999 Dimensions and tolerances of bright steel products
EN ISO 18369-2:2017 Ophthalmic optics - Contact lenses - Part 2: Tolerances
EN ISO 18369-2:2012 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012)
prEN 2036-1977 Round steel bars, ground; dimensions; tolerance h 8; aerospace series
EN 2036:2017 Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8

Professional Standard - Aviation, Spectral Tolerance

HB 8353-2013 TC4 thread tolerance band 4h6h polished rod tolerance band f9MJ long thread hex head bolts
HB 8354-2013 TC4 thread tolerance band 4h6h polished rod tolerance band f9MJ extended thread hex head bolt
HB 1-103-2002 Hexagon-head bolts ,shank tolerance f9
HB 8036-2002 Hexagon bolts,tolerance p6
HB 1-131-1995 Polished rod tolerance band f9 90° countersunk head bolts
HB 1-103-1995 Polished rod tolerance band f9 hexagon head bolts
HB 7200-1995 Polished rod tolerance band f9 100° countersunk head bolts
HB 1-103-1983 Polished rod tolerance band f9 hexagon head bolts
HB 1-131-1983 Polished rod tolerance band f9 90° countersunk head bolts
HB 6902-1993 Dodecagon head bolts with polished rod tolerance zone f9
HB 6903-1993 Dodecagon head bolts with polished rod tolerance zone f9
HB 8038-2002 90°countersunk head bolts with recess,tolerance p6
HB 1-132-2002 90°countersunk head bolts with cross recess,shank tolerance f9
HB 1-133-2002 90°countersunk bolts,short thread,shank tolerance h8
HB 1-151-2002 Hexagen bolts,short thread,shank tolerance f9
HB 1-153-1995 Polished rod tolerance band r6 short thread hexagon head bolts
HB 1-151-1995 Polished rod tolerance band f9 short thread hexagon head bolts
HB 1-132-1995 Polished rod tolerance band f9 cross recessed 90° countersunk head bolts
HB 1-133-1995 Polished rod tolerance band h8 short thread 90° countersunk head bolts
HB 7201-1995 Polished rod tolerance band f9 cross recessed 100° countersunk head bolts
HB 7202-1995 Polished rod tolerance band h8 short thread 100° countersunk head bolts
HB 7206-1995 Polished rod tolerance band r6 short thread 100° countersunk head bolts
HB 1-155-1995 Polished rod tolerance band r6 short thread 90° countersunk head bolts
HB 7414-1996 MJ thread polished rod tolerance with f9 hex head bolts
HB 1-151-1983 Polished rod tolerance band f9 short thread hexagon head bolts
HB 6563-2013 Titanium Alloy Polished Rod Tolerance Band F9 Hex Head Bolts
HB 8318-2013 A286 polished rod tolerance band f9MJ thread hex head bolt
HB 1-132-1983 Polished rod tolerance band f9 cross recessed 90° countersunk head bolts
HB 6563-1992 Titanium alloy polished rod tolerance zone f9 hexagon head bolts
HB 1-133-1983 Polished rod tolerance band h8 short thread 90° countersunk head bolts
HB 1-153-1983 Polished rod tolerance band r6 short thread hexagon head bolts
HB 1-155-1983 Polished rod tolerance band r6 short thread 90° countersunk head bolts
HB 1-105-2002 Reduced hexagon-head bolts ,short thread,shank tolerance h8
HB 8037-2002 Reduced hexagon bolts,short thread tolerance p6
HB 1-105-1995 Polished rod tolerance band h8 short thread small hexagon head bolts
HB 1-104-1995 Polished rod tolerance band f9 short thread small hexagon head bolts
HB 1-105-1983 Polished rod tolerance band h8 short thread small hexagon head bolts
HB 5647-1981 Labeling, tolerance and smoothness of blade profile (Trial)
HB 5628-1983 Polished rod tolerance zone f9 shear-resistant flat head high-lock bolts
HB 1-144-1983 Polished rod tolerance zone f7 both sides cut flat cylinder head bolts
HB 1-145-1983 Polished rod tolerance zone m6 both sides cut flat cylinder head bolts
HB 1-144-1995 Polished rod tolerance zone f7 both sides cut flat cylinder head bolts
HB 1-104-1983 Polished rod tolerance band f9 short thread small hexagon head bolts
HB 5627-1983 Polished rod tolerance zone r6 shear-resistant flat head high lock bolts
HB 1-145-1995 Polished rod tolerance zone m6 both sides cut flat cylinder head bolts
HB 8015-2002 Hexagon head bolts,shank tolerance f9,in titanium alloy
HB 8016-2002 90°countersunk head bolts,shank tolerance f9,in titanium alloy
HB 8018-2002 Flat round head bolts,shank tolerance f9,in titanium alloy
HB 7439-2013 Polished rod tolerance band f9MJ thread cross recessed 100° countersunk head bolts
HB 8321-2013 A286 polished rod tolerance band f9MJ thread cross recessed flat head bolt
HB 5626-1983 Polished rod tolerance zone f9 shear-resistant 90° countersunk head high lock bolt
HB 5625-1983 Polished rod tolerance zone r6 shear-resistant 90° countersunk head high lock bolt
HB 8356-2013 TC4 thread tolerance with 4h6h polished rod tolerance with f9 head 1 fuse hole MJ extended thread hex head bolt
HB 1-106-2002 Reduced hexagon-head bolts ,shank tolerance f7 for hinge joint
HB 8017-2002 120°raised head bolts,shank tolerance h9,in titanium alloy
HB 8022-2002 Reduced hexagon bolts,shank tolerance f9,in titanium alloy
HB 8039-2002 90°countersunk head bolts with recess,short thread tolerance p6
HB 6565-2004 100°countersunk head bolts.short thread,shank tolerance f9,in titanium alloy
HB 1-134-2002 90°countersunk head bolts with cross recess,shank tolerance f9
HB 8270-2002 Titanium alloy shank tolerance zone f9 short-thread 100° countersunk head screw
HB 1-106-1995 Polished rod tolerance band f7 small hexagon head bolts for hinge connection
HB 1-134-1995 Polished rod tolerance band h8 short thread cross recessed 90° countersunk head bolts
HB 7203-1995 Polished rod tolerance band h8 short thread cross recessed 100° countersunk head bolts
HB 1-107-1995 H6 small hex head bolts with polished rod tolerance for hinge connection
HB 1-156-1995 Polished rod tolerance band R6 short thread cross recessed 90° countersunk head bolts
HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
HB 7207-1995 Polished rod tolerance band r6 short thread cross recessed 100° countersunk head bolts
HB 7439-1996 MJ thread polished rod tolerance f9 cross recessed 100° countersunk head bolts
HB 6565-2013 Titanium Alloy Polished Rod Tolerance Band f9 Cross Recessed 100° Countersunk Head Bolts
HB 8317-2013 A286 polished rod tolerance band f9MJ thread short thread hexagon head bolt
HB 1-134-1983 Polished rod tolerance band h8 short thread cross recessed 90° countersunk head bolts
HB 1-106-1983 Polished rod tolerance band f7 small hexagon head bolts for hinge connection
HB 1-107-1983 H6 small hex head bolts with polished rod tolerance for hinge connection
HB 1-156-1983 Polished rod tolerance band R6 short thread cross recessed 90° countersunk head bolts
HB 7422-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 7424-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
HB 7422～7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
HB 6511-1991 Polished rod tolerance zone r6 shear-resistant flat head titanium alloy high-lock bolts
HB 6512-1991 Polished rod tolerance zone f9 shear-resistant flat head titanium alloy high-lock bolts
HB 7423-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 6509-2005 Hi-lock bolts with 100°countersunk, shank tolerance r6,in titanium alloy
HB 6510-2005 Hi-lock bolts with 100°countersunk, shear,shank tolerance f9,in titanium alloy
HB 8320-2013 A286 polished rod tolerance band f9MJ thread cross recessed short thread flat head bolts
HB 6509-1991 Polished rod tolerance zone r6 shear resistant type 100° countersunk head titanium alloy high lock bolt
HB 6510-1991 Polished rod tolerance zone f9 shear resistant type 100° countersunk head titanium alloy high lock bolt
HB 7442-1996 MJ thread polished rod tolerance band r6 short thread cross recessed 100° countersunk head bolts
HB 7441-1996 MJ thread polished rod tolerance band h8 short thread cross recessed 100° countersunk head bolts
HB 8319-2013 A286 polished rod tolerance band f9MJ thread cross recessed short thread 100° countersunk head bolts
HB 6565-1992 Titanium Alloy Polished Rod Tolerance Band f9 High Torque Cross Recessed 100° Countersunk Head Bolts

Danish Standards Foundation, Spectral Tolerance

DS/EN 10278:2002 Dimensions and tolerances of bright steel products
DS/EN ISO 18369-2:2006 Ophthalmic optics - Contact lenses - Part 2: Tolerances

Lithuanian Standards Office , Spectral Tolerance

LST EN 10278-2000 Dimensions and tolerances of bright steel products
LST EN ISO 18369-2:2013 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012)

AENOR, Spectral Tolerance

UNE-EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-EN ISO 18369-2:2013 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012)

ES-UNE, Spectral Tolerance

UNE-EN 10278:2003 ERRATUM DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-EN ISO 18369-2:2018 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017)

Military Standard of the People's Republic of China-General Armament Department, Spectral Tolerance

GJB 121.3-1986 Polished rod tolerance zone f9 hexagon head bolts
GJB 121.13-1986 Polished rod tolerance zone f9 100° countersunk head bolt
GJB 121.15-1986 Polished rod tolerance zone h8 short thread 100° countersunk head bolt
GJB 121.14-1986 Polished rod tolerance zone f9 cross recessed 100° countersunk head bolt
GJB 121.21-1986 Polished rod tolerance band F9 short thread hexagon head bolts
GJB 121.23-1986 Polished rod tolerance band r6 short thread hexagon head bolts
GJB 121.25-1986 Polished rod tolerance band r6 short thread 100° countersunk head bolt
GJB 121.4-1986 Polished rod tolerance zone f9 short thread small hexagon head bolt
GJB 121.5-1986 Polished rod tolerance zone h8 short thread small hexagon head bolt
GJB 134.4-1986 Polished rod tolerance zone r6 shear resistant flat head high locking bolt
GJB 134.5-1986 Polished rod tolerance zone f9 shear resistant flat head high locking bolt
GJB 121.27-1986 Polished rod tolerance zone F7 flattened cylindrical head bolts on both sides
GJB 121.28-1986 Polished rod tolerance zone m6 flattened cylindrical head bolts on both sides
GJB 134.2-1986 Polished rod tolerance zone R6 shear-resistant 100° countersunk head high locking bolt
GJB 134.3-1986 Polished rod tolerance zone f9 shear-resistant 100° countersunk head high locking bolt
GJB 121.16-1986 Polished rod tolerance zone h8 short thread cross recessed 100° countersunk head bolt
GJB 121.26-1986 Polished rod tolerance band r6 short thread cross recessed 100° countersunk head bolt
GJB 121.7-1986 Polished rod tolerance zone H6 small hexagon head bolts for hinge connections
GJB 121.6-1986 Polished rod tolerance zone F7 small hexagon head bolts for hinge connections

Professional Standard - Military and Civilian Products, Spectral Tolerance

WJ 1702-1987 Tolerances and technical conditions of smooth limit gauges

International Organization for Standardization (ISO), Spectral Tolerance

ISO 18369-2:2017 Ophthalmic optics — Contact lenses — Part 2: Tolerances
ISO 18369-2:2006 Ophthalmic optics - Contact lenses - Part 2: Tolerances
ISO 18369-2:2012 Ophthalmic optics - Contact lenses - Part 2: Tolerances
ISO 10110-6:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances
ISO 10110-6:1996 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances
ISO 2857:1973/Amd 2:1986 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
ISO 2857:1973/Amd 1:1984 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
ISO 10110-5:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
ISO 10110-11:1996 Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data
ISO/CD 10110-11.2 Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
ISO 10110-5:2015 Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
ISO 10110-11:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data
ISO 8255-1:1986 Optics and optical instruments; Microscopes; Cover glasses; Part 1 : Dimensional tolerances, thickness and optical properties
ISO 10110-7:1996 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances
ISO 10110-5:1996 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
ISO 10110-14:2003 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO 10110-14:2007 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO/CD 10110-6 Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring and tilt tolerances
ISO 10110-7:2017 Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
ISO 10110-14:2018 Optics and photonics - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO/CD TS 6838 Ophthalmic optics — Contact lenses — Tolerances and methods for measurement of multifocal contact lens addition power
ISO 10110-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances

CEN - European Committee for Standardization, Spectral Tolerance

EN ISO 18369-2:2006 Ophthalmic optics - Contact lenses - Part 2: Tolerances

American Society for Testing and Materials (ASTM), Spectral Tolerance

ASTM E2729-09(2015) Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM D3134-15(2019) Standard Practice for Establishing Color and Gloss Tolerances

CZ-CSN, Spectral Tolerance

CSN 25 3102-1980 Plain limit gauges for dimensions up to 500 mm. Tolerances

YU-JUS, Spectral Tolerance

JUS C.J9.017-1991 Preclsion castings. Tolerances, surface flnlsh and machining alovanses

Indonesia Standards, Spectral Tolerance

SNI IEC 60904-7:2011

FI-SFS, Spectral Tolerance

SFS 5500-1989

SE-SIS, Spectral Tolerance

SIS SS 2454-1979 iSO system for inspection of plain workpieces — Tolerances for gauges for shafts y6 to y8
SIS SS 2438-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts f6 to f9
SIS SS 2432-1979 ISO system for inspection of plain workpieces - Tolerances for gauges for shafts b9 to b13
SIS SS 2421-1979 ISO system for inspection of plain workpieces — Tolerances forgauges for holes U6 to U8
SIS SS 2458-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts zc7 to zc9
SIS SS 2419-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes S6 to S8
SIS SS 2414-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes K6 to K8
SIS SS 2420-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes T6 to T8
SIS SS 2415-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes M6 to M8
SIS SS 2446-1979 fSO system for inspection of plain workpieces — Tolerances for gauges for shafts n6 and n7
SIS SS 2409-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes FG6 to FG8
SIS SS 2449-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts s6 and s7
SIS SS 2444-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts k6 to k16
SIS SS 2428-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes ZC8 to ZC10
SIS SS 2405-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes D7 to D13
SIS SS 2448-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts r6 and r7
SIS SS 2447-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts p6 and p7
SIS SS 2455-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts z6 to z8
SIS SS 2408-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes F6 to F9
SIS SS 2440-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts g6 to g8
SIS SS 2410-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes G6 to G8
SIS SS 2418-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes R6 to R8
SIS SS 2406-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes E6 to E10
SIS SS 2411-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes H6 to H16
SIS SS 2433-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts c8 to c12
SIS SS 2401-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes A11 to A13
SIS SS 2426-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes ZA7 to ZA9
SIS SS 2407-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes EF6 to EF9
SIS SS 2445-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts m6 and m7
SIS SS 2412-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes J6 to J8
SIS SS 2441-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts h6 to h16
SIS SS 2451-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts u6 to u8
SIS SS 2457-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts zb7 to zb9
SIS SS 2413-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes JS6 to JS16
SIS SS 2456-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts za6 to za8
SIS SS 2422-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes V6 to V8
SIS SS 2431-1979 fSO system for inspection of plain workpieces — Tolerances for gauges for shafts a 10 to a13
SIS SS 2425-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes Z7 to Z9
SIS SS 2452-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts v6 to v8
SIS SS 2450-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts t6 and t7
SIS SS 2443-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts js6 to js16
SIS SS 2402-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes B9 to B13
SIS SS 2437-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts ef6 to ef9
SIS SS 2435-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts d7 to d11
SIS SS 2417-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes P6 to P9
SIS SS 2439-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts fg6 and fg7
SIS SS 2404-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes CD7 to CD10
SIS SS 2427-1979 ISO system for inspection of plain workplaces — Tolerances for gauges for holes ZB8 to ZB10
SIS SS 2442-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts j6 and j7
SIS SS 2403-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes C8 to C13
SIS SS 2424-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes Y6 to Y8
SIS SS 2416-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes N6 to N11
SIS SS 2434-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts cd7 to cd10
SIS SS 2436-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for shafts e6 to e10
SIS SS 2423-1979 ISO system for inspection of plain workpieces — Tolerances for gauges for holes X6 to X8
SIS SMS 1745-1973 Screw plug gauges and plain plug gauges. Profiles and tolerances. ISO inch screw threads

International Electrotechnical Commission (IEC), Spectral Tolerance

IEC 60904-7:1998 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device

CENELEC - European Committee for Electrotechnical Standardization, Spectral Tolerance

EN 60904-7:1998 Photovoltaic Devices Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device

Korean Agency for Technology and Standards (KATS), Spectral Tolerance

KS B ISO 10110-6:2007 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 6：Centering tolerances
KS B ISO 10110-11:2013 Optics and optical instruments ― Preparation of drawings for optical elements and systems ― Part 11: Non-toleranced data
KS B ISO 10110-11:2008 Optics and optical instruments-Preparation of drawings for optical elements and systems-Part 11:Non-toleranced data
KS B ISO 10110-6:2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 6：Centering tolerances
KS B ISO 10110-6-2017(2022) Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 6：Centering tolerances
KS B ISO 10110-5:2013 Optics and optical instruments ― Preparation of drawings for optical elements and systems ― Part 5: Surface form tolerances
KS B ISO 10110-7:2007 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS B ISO 10110-5:2008 Optics and optical instruments-Preparation of drawings for optical elements and systems-Part 5:Surface form tolerances
KS B ISO 10110-14-2010(2020) Optics and photonics－Preparation of drawings for optical elements and systems－Part 14：Wavefront deformation tolerance
KS B ISO 10110-5:2018 Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
KS B ISO 10110-14:2010 Optics and photonics-Preparation of drawings for optical elements and systems-Part 14:Wavefront deformation tolerance
KS B ISO 10110-7:2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS B ISO 10110-7-2017(2022) Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances

Professional Standard - Electron, Spectral Tolerance

SJ/Z 3206.14-1989 General rules for error in spectrum chemical analysis and data processing in laboratories

KR-KS, Spectral Tolerance

KS B ISO 10110-6-2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 6：Centering tolerances
KS B ISO 10110-5-2018 Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
KS B ISO 10110-7-2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectral Tolerance

GB/T 6495.7-2006 Photovoltaic devices. Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
GB/T 15826.6-1995 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps

RO-ASRO, Spectral Tolerance

STAS SR ISO 8255-1:1995 Optics and optical instruments Microscopes — Cover glasses Part 1: Dimensional tolerances, thickness and optical properties

Aerospace, Security and Defence Industries Association of Europe (ASD), Spectral Tolerance

ASD-STAN PREN 2036-1976 Round Steel Bars - Ground Dimensions - Tolerance h 8 Aerospace Series (Edition 1)

Inner Mongolia Provincial Standard of the People's Republic of China, Spectral Tolerance

DB15/T 2494-2021 Highway asphalt infrared spectrum rapid detection test procedures

Taiwan Provincial Standard of the People's Republic of China, Spectral Tolerance

CNS 13059.7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device
CNS 13059-7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device

Japanese Industrial Standards Committee (JISC), Spectral Tolerance

JIS B 0090-6:2021 Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances