ZH
RU
ES
carbon nanotubes
carbon nanotubes, Total:93 items.
In the international standard classification, carbon nanotubes involves: Materials for the reinforcement of composites, Test conditions and procedures in general, Analytical chemistry, Physics. Chemistry, Electronic components in general, Optics and optical measurements, Rubber, Paints and varnishes, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Lighting, Environmental protection.
国家市场监督管理总局、中国国家标准化管理委员会, carbon nanotubes
- GB/T 37152-2018 Nanotechnology—Carbon nanotube materials—Sheet resistance
- GB/T 39978-2021 Nanotechnology—Resistivity of carbon nanotube powder—Four probe method
- GB/T 40568-2021 Nanotechnologies—Characterization of multiwall carbon nanotubes—Mesoscopic shape factors
- GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
- GB/T 37225-2018 Nanotechnology—Characterization of multiwall carbon nanotube in aqueous solution—Extinction spectroscopy
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon nanotubes
- GB/T 33243-2016 Nanotechnologies.Characterization of multiwall carbon nanotube(MWCNT)
- GB/T 32868-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- GB/T 24491-2009 Multi-walled carbon nanotubes
- GB/T 30543-2014 Nanotechnologies.Characterization of single-wall carbon nanotubes using transmission electron microscopy
- GB/T 26826-2011(英文版) Measurement for diameter of carbon nanotubes
- GB/T 26826-2011 Measurement for diameter of carbon nanotubes
- GB/T 24490-2009 Test method for purity of multi-walled carbon nanotubes
- GB/T 32871-2016 Characterization of single-walled carbon nanotubes by Raman spectroscopy
- GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, carbon nanotubes
- GB/T 36065-2018 Nanotechnologies—Analysis of amorphous carbon, ash and volatile of carbon nanotubes—Thermogravimetry
- GB/T 33818-2017 Carbon nanotube conductive paste
- GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis
- GB/T 35418-2017 Nanotechnologies—Determination of elemental impurities in samples of carbon nanotubes—Inductively coupled plasma mass spectrometry
British Standards Institution (BSI), carbon nanotubes
- PD ISO/TR 23463:2022 Nanotechnologies. Characterization of carbon nanotube and carbon nanofiber aerosols in relation to inhalation toxicity tests
- PD IEC TS 62607-2-4:2020 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes
- PD ISO/TR 10929:2012 Nanotechnologies. Characterization of multiwall carbon nanotube (MWCNT) samples
- PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
- PD ISO/TS 19808:2020 Nanotechnologies. Carbon nanotube suspensions. Specification of characteristics and measurement methods
- BS PD ISO/TS 11308:2020 Tracked Changes. Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
- BS DD ISO/TS 11888:2011 Nanotechnologies. Characterization of multiwall carbon nanotubes. Mesoscopic shape factors
- BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- PD ISO/TS 11888:2017 Tracked Changes. Nanotechnologies. Characterization of multiwall carbon nanotubes. Mesoscopic shape factors
- PD IEC/TS 62607-2-1:2012 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Film resistance
- PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
- PD ISO/TS 10797:2012 Nanotechnologies. Characterization of single-wall carbon nanotubes using transmission electron microscopy
International Organization for Standardization (ISO), carbon nanotubes
- ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- ISO/TS 19808:2020 Nanotechnologies — Carbon nanotube suspensions — Specification of characteristics and measurement methods
- ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
- IEC TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
- IEC/TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
- ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO/TR 23463:2022 Nanotechnologies — Characterization of carbon nanotube and carbon nanofibre aerosols to be used in inhalation toxicity tests
- ISO/TS 11308:2020 Nanotechnologies — Characterization of carbon nanotube samples using thermogravimetric analysis
- ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
Danish Standards Foundation, carbon nanotubes
- DS/ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- DS/ISO/TS 11888:2012 Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors
- DS/ISO/TS 11308:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- DS/ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
Association Francaise de Normalisation, carbon nanotubes
- XP T16-208*XP ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- XP ISO/TR 10929:2012 Nanotechnologies - Caractérisation des échantillons de nanotubes de carbone multifeuillets (NWCNTs)
- XP T16-224*XP ISO/TS 19808:2020 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
- XP ISO/TS 19808:2020 Nanotechnologies - Suspensions de nanotubes de carbone - Spécification des caractéristiques et méthodes de mesure
- XP ISO/TS 11888:2017 Nanotechnologies - Caractérisation des nanotubes en carbone multicouches - Facteurs de forme mésoscopique
- FD T16-209:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
German Institute for Standardization, carbon nanotubes
- DIN IEC/PAS 62565-2-1:2012 Nanomanufacturing - Material specifications - Part 2-1: Single-wall carbon nanotubes - Blank detail specification (IEC/PAS 62565-2-1:2011)
- DIN IEC 62624:2010-10 Test methods for measurement of electrical properties of carbon nanotubes (IEC 62624:2009)
- DIN IEC 62624:2010 Test methods for measurement of electrical properties of carbon nanotubes (IEC 62624:2009)
PH-BPS, carbon nanotubes
- PNS ISO/TS 19808:2021 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
- PNS IEC 62624:2021 Test methods for measurement of electrical properties of carbon nanotubes
- PNS ISO/TS 11308:2021 Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis
GOSTR, carbon nanotubes
- PNST 307-2018 Nanotechnologies. Single-wall carbon nanotubes. Characterization using thermogravimetric analysis
- GOST R 58356-2019 Nanomaterials. Single-wall carbon nanotubes. Technical requirements and test methods
- GOST 34684-2020 Nanomaterials. Single-wall carbon nanotubes. Technical requirements and test methods
- PNST 499-2020 Nanotechnologies. Сarbon nanotubes. Determination of chemical element impurities by inductively coupled plasma mass spectrometry method
- PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry
- PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
KR-KS, carbon nanotubes
- KS C ISO TS 11888-2023 Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
- KS D 2711-2008(2023) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
- KS C IEC 62624-2017 Test methods for measurement of electrical properties of carbon nanotubes
International Electrotechnical Commission (IEC), carbon nanotubes
- IEC TS 62607-2-4:2020 Nanomanufacturing - Key control characteristics - Part 2-4: Carbon nanotube materials - Test methods for determination of resistance of individual carbon nanotubes
- IEC TS 62607-2-5:2022 Nanomanufacturing - Key control characteristics - Part 2-5: Carbon nanotube materials - Mass density of vertically-aligned carbon nanotubes: X-ray absorption method
- IEC 62624:2009 Test methods for measurement of electrical properties of carbon nanotubes
American Society for Testing and Materials (ASTM), carbon nanotubes
- ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
Korean Agency for Technology and Standards (KATS), carbon nanotubes
- KS D 2711-2008 Evaluation of carbon nanotube soots and non-carbon content-Thermogravimetric analysis
- KS C IEC 62624:2017 Test methods for measurement of electrical properties of carbon nanotubes
- KS D 2711-2008(2018) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
- KS C IEC 62624-2017(2022) Test methods for measurement of electrical properties of carbon nanotubes
- KS C 8015-2017 Carbon nanotube(CNT) panel for general lighting－Performance requirements
- KS C 8014-2011(2016) Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS C 8014-2011(2021) Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS C 8015-2017(2022) Carbon nanotube(CNT) panel for general lighting－Performance requirements
- KS C 8014-2011 Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS D 2712-2008 Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy
RU-GOST R, carbon nanotubes
Group Standards of the People's Republic of China, carbon nanotubes
- T/FJAS 012-2022 Carbon nanotubes electromagnetic shielding rubber
- T/CESA 1092-2020 Assessment requirements for green factory in carbon nanotube manufacturing industry
Professional Standard - Building Materials, carbon nanotubes
Japanese Industrial Standards Committee (JISC), carbon nanotubes
US-CFR-file, carbon nanotubes
- CFR 40-721.10663-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10663:Functionalized multiwalled carbon nanotubes (generic).
Professional Standard - Textile, carbon nanotubes
- FZ/T 54056-2012 Ultra-high molecular weight polyethylene (UHMWPE) /nano-carbon tube filament yarns
Institute of Electrical and Electronics Engineers (IEEE), carbon nanotubes
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., carbon nanotubes
- IEEE 1650-2005 Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
American National Standards Institute （ANSI), carbon nanotubes
- ANSI/IEEE 1650:2005 Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes