ZH
RU
ES

How to measure roughness

How to measure roughness, Total:288 items.

In the international standard classification, How to measure roughness involves: Paper and board, Linear and angular measurements, Construction materials, Products of the textile industry, Mechanical testing, Gears, Surface treatment and coating, Vocabularies, Wood, sawlogs and sawn timber, Wood-based panels, Iron and steel products, Machine tool systems, Semiconducting materials, Road engineering, Road vehicles in general, Bearings, Rubber and plastics products, Paper products, Powder metallurgy, Optics and optical measurements, Testing of metals, Photography, Acoustics and acoustic measurements, Construction of railways, Optical equipment, Rails and railway components, Pulps, Ceramics, Graphic technology, Metrology and measurement in general, Reinforced plastics.

NL-NEN, How to measure roughness

NEN 3635-1980 Surface roughness - Measurement of fla roughness value
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
NEN 1839-1989 Paper - Determination of paper surface roughness with water
NEN 2809-1990 Terms for Standard measures, gauges and measuring instruments for lineair measures, angles, form, location and surface roughness

RO-ASRO, How to measure roughness

STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS ISO 1879:1993 Instrumets for the measurement of surface roughness by the profile method. Vocabulary
STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure roughness

GB/T 2679.4-1994 Paper and board-Determination of the roughness(Bendtsen method)
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 2523-1990 Cold rolled sheet(strip)--Measuring method for surface roughness
GB/T 29505-2013 Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 2679.9-1993 Paper and board.Determination of roughness(Print-surface method)
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 32642-2016 Flat panel displays glass substrate surface roughness measurement method
GB/T 22881-2008 Paper and board.Determination of roughness/smoothness(air leak methods).General method
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the detdrmination of the surface profile.
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 30860-2014 Test methods for surface roughness and saw mark of silicon wafers for solar cells
GB/T 31199-2014 Surface roughness parameters measurement for CTP plate substrate
GB/T 22363-2008 Paper and board.Determination of roughness（air leak methods）.Bendtsen method and print-surf method
GB/T 31226-2014 Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 7220-2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method Surface roughness-Terminology-Measurement of surface roughness Parameters

SE-SIS, How to measure roughness

SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS 02 11 09-1982 Measurement in building - Surface roughness - Expression of profile measurement
SIS SS-ISO 4288:1988 Rules and procedures for the measure- ment of surface roughness using stylus instruments

Korean Agency for Technology and Standards (KATS), How to measure roughness

KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method
KS M 4058-2021 Determination of stylus contact method of paper and board — Surface roughness
KS F 2373-2010(2020) Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS F 2373-2000 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS M ISO 8791-2:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-2:2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-1:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 8791-3:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3:2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-2:2008 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 2:Bendtsen method
KS M ISO 8791-1:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 1：General method
KS M ISO 9184-6:2007 Paper, board and pulps－Fibre furnish analysis－Part 6：Determination of fibre coarseness
KS M ISO 9184-6:2017 Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness
KS M ISO 8791-3:2006 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 3:Sheffield method
KS M ISO 8791-4:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 4：Print-surf method
KS M ISO 8791-4:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

Professional Standard - Light Industry, How to measure roughness

QB/T 1056-1991 Bendtsen roughness tester

轻工业部, How to measure roughness

QB 1056-1991 Bentson roughness tester

International Organization for Standardization (ISO), How to measure roughness

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 3546:1976 Fibre building boards; Determination of surface finish (roughness)
ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO 1879:1974 Title missing - Legacy paper document
ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
ISO 1879:2009 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
ISO 2494:1974 Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method
ISO 8791-5:2020 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
ISO/FDIS 24118-1:1964 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 24118-1:2023 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 8791-4:2007 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-2:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 2: Bendtsen method
ISO 8791-1:1986 Paper and board; Determination of roughness/smoothness (air leak methods); Part 1 : General method
ISO 8791-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-3:2017 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
ISO 8791-2:2013 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method
ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 3: Sheffield method
ISO 8791-3:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 3: Sheffield method
ISO 8791-4:1992 Paper and board; determination of roughness/smoothness (air leak methods); part 4: print-surf method
ISO 1880:1974 Title missing - Legacy paper document
ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of progressive profile transformation; Profile recording instruments
ISO 15024:2001 Fibre-reinforced plastic composites - Determination of Mode I interlaminar fracture toughness, G<(Index)IC>, for unidirectionally reinforced materials
ISO 3274:1975 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of consecutive profile transformation; Contact profile meters, system M
ISO 15024:2023 Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials

TR-TSE, How to measure roughness

TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY
TS 3429-1979 PAPER AND BOARD - RECOMMENDED PROCEDURE FOR THE DETERMINATION OF ROUGHNESS - CONSTANT - PRESSURE - AIR - METHOD
TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

Taiwan Provincial Standard of the People's Republic of China, How to measure roughness

CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method

IN-BIS, How to measure roughness

Indonesia Standards, How to measure roughness

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI ISO 8791-4:2010 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4:Print-surf method
SNI 05-2182-1991 Surface-roughness equipment by instan touch type and phases transformation profile methods

American Society for Testing and Materials (ASTM), How to measure roughness

ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM E1448-92(2004) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1215-93(2003) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1364-95(2000) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1082-90(1995) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2017) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1215-93(2007) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(1998) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1926-98 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-98(2003) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-08(2015) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1448-92(1998) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1448/E1448M-09(2023) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM F1438-93(2005) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(1999) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM F1438-93(2020) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
ASTM D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D7127-17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

VN-TCVN, How to measure roughness

TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

CZ-CSN, How to measure roughness

CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 49 0169-1986 Method for determination surface roughness of particle boards
CSN 49 2654-1985 Fibreboards. Determination of quality of surface finish (roughness)
CSN 49 2654-1975 Determtltatlon of surfaci? finish (roughness) of wood fitare butlding Ihuirds
CSN 50 0379-1976 Paper testing methods. Smoothnees (roughnese) of páper by Bendtsen method
CSN ISO 8791-1:1993 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 1: General method
CSN ISO 8791-4:1994 Paper and board-Determination of roughness/smoothness(air leak methods)-Part 4:Print-surf method

(U.S.) Ford Automotive Standards, How to measure roughness

FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

AENOR, How to measure roughness

UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)
UNE 82303:1991 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROFILE METHOD. VOCABULARY
UNE 57080-2:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOOTHNESS. PART 2: BENDTSEN METHOD
UNE 57080-1:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOTHNESS. PART 1: GENERAL METHOD
UNE 57080-4:2006 Paper and board. Determination of roughness/smoothness. Part 4: Parker Print-surf method.
UNE 57080-2/1M:2002 Paper and board. Determination of roughness/smoothness (air leak methods). Part 2: Bendtsen method.
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN 15610:2010 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation

Association of German Mechanical Engineers, How to measure roughness

VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure
DVS 2303-3-2009
DVS 2303-3-2000
VDI/VDE 2602-1983 Roughness measurement with electric contact (stylus) profile meters
VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments
VDI/VDE 2655 Blatt 1.1-2008 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI/VDE 2655 Blatt 1.2-2010 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
VDI/VDE 2612 Blatt 5-2015 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments

AT-ON, How to measure roughness

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments

HU-MSZT, How to measure roughness

MSZ 07 3301-1977

RU-GOST R, How to measure roughness

GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST 15612-2013 Products from wood and wood materials. Methods for determination of roughness parametrs
GOST 33101-2014 Automobile roads of general use. Road pavement. Roughness measurement methods
GOST 18961-1980 Diamond needles for suface roughness measurements. Technical conditions
GOST 30115-1995 Paper and board. Determination of roughness/smoothness (air leak methods). General method
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST R 8.651-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration

German Institute for Standardization, How to measure roughness

DIN 53108:2018 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 53108:2011 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 40686 Bb.2:1983 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN 53108:1995 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 54530-10:2000-02 Paper and board - Testing of cores - Part 10: Determination of surface roughness
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN ISO 8791-4:2008 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007)
DIN 54530-10:2000 Paper and board - Testing of cores - Part 10: Determination of surface roughness
DIN ISO 23519:2015-12 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN 40686 Beiblatt 2:1983-08 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN CEN/TR 15874:2016-09*DIN SPEC 45659:2016-09 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009; German version CEN/TR 15874:2009
DIN ISO 8791-4:2023-08 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2021)
DIN ISO 23519:2015 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN CEN/TR 16891:2017-03*DIN SPEC 38451:2017-03 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions; German version CEN/TR 16891:2016
DIN EN 15610:2021-11 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation; German version EN 15610:2019
DIN EN 15610:2017 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation; German and English version prEN 15610:2017
DIN EN 623-4:2005 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products; English version of DIN EN 10049:2006-02
DIN EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013

Japanese Industrial Standards Committee (JISC), How to measure roughness

JIS B 0652:1973 Instruments for the measurement of surface roughness by the interferometric method
JIS P 8151:2004 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Print-surf method
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy

British Standards Institution (BSI), How to measure roughness

BS 4420:1990 Method for determination of the Bendtsen roughness of paper and board
BS ISO 8791-5:2020 Paper and board. Determination of roughness/smoothness (air leak methods) - Oken method
BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS ISO 8791-4:2008 Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Sheffield method
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method
BS ISO 8791-3:2017 Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS ISO 8791-4:2021 Tracked Changes. Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS EN 10049:2005 Measurement of roughness average - Ra and peak count RPc on metallic flat products
19/30357540 DC BS ISO 8791-5. Paper and board. Determination of roughness/smoothness (air leak methods). Part 5. Oken method
20/30380002 DC BS ISO 8791-4. Paper and board. Determination of roughness/smoothness (air leak methods). Part 4. Print-surf method
BS EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of surface roughness
BS PD CEN/TR 15874:2009 Railway applications — Noise emission — Road test of standard for rail roughness measurement EN 15610:2009
21/30434709 DC BS ISO 24118-1. Paper and board. Stylus contact method - Part 1. Determination of surface roughness
22/30458026 DC BS ISO 24118-1. Paper and board. Stylus contact method. Part 1. Determination of surface roughness
BS EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
BS EN 15610:2019 Tracked Changes. Railway applications. Acoustics. Rail and wheel roughness measurement related to noise generation
DD ENV 623-4-1994 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of surface roughness

PL-PKN, How to measure roughness

PN D04206-1987 Particleboard and fibreboard Determination of surface roughness
PN M04256-03-1987 Geometrie surface structure Surface roughness Terminology of measurements

National Metrological Technical Specifications of the People's Republic of China, How to measure roughness

JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1105-2018 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method

Society of Automotive Engineers (SAE), How to measure roughness

SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel

Professional Standard - Machinery, How to measure roughness

JB/T 7976-1999 Instrument for the measurement of surface roughness by the profile method.Terms
JB/T 7976-2010 Instrument for the measurement of surface roughness by the profile method-Terms
JB/T 8204-1996 Rolling bearing laser ball surface roughness measuring instrument
JB/T 7051-2006 Rolling bearings parts.Methods for the measurement and assessment of surface roughness
JB/T 7051-1993 Measuring and evaluating method of surface roughness of rolling bearing parts

未注明发布机构, How to measure roughness

GJB 9248-2017 Optical component surface roughness detection method Interferometry
BS EN 623-4:2004(2009) Advanced technical ceramics — Monolithic ceramics — General and textural properties — Part 4 : Determination of surface roughness

YU-JUS, How to measure roughness

JUS H.N8.151-1989 Testing of paper and board. Determination of roughness/smoothness (air leak methods). General method

Professional Standard - Electron, How to measure roughness

SJ/T 11503-2015 Test methods for measuring surface roughness of polished monocrystalline silicon carbide wafers

Danish Standards Foundation, How to measure roughness

DS/ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method. Vocabulary
DS/ISO 4288:1986 Rules and procedures for the measurement of surface roughness parametres using stylus instruments
DS/EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
DS/CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
DS/EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
DS/ISO 1880:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments

Association Francaise de Normalisation, How to measure roughness

NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
NF EN 10049:2014 Mesure de la rugosité moyenne Ra et du nombre de pics RPc sur les produits plats métalliques
NF ISO 8791-4:2021 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 4 : méthode Print-surf
NF ISO 8791-2:2014 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 2 : méthode Bendtsen
NF Q03-079-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4 : print-surf method
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NF Q03-049:1972 Paper and board tests. Determination of roughness. Constant pressure air flow method.
NF Q03-079-2*NF ISO 8791-2:2014 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2 : Bendtsen method
NF A45-000:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products.
NF F01-522*NF EN 15610:2019 Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
FD F01-874*FD CEN/TR 15874:2011 Railway application - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
NF F01-522:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation.
FD F01-891*FD CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions
FD CEN/TR 16891:2016 Applications ferroviaires - Acoustique - Méthode de mesurage pour la rugosité combinée, les taux de décroissance de la voie et les fonctions de transfert
FD CEN/TR 15874:2011 Applications ferroviaires - Bruit à l'émission - Essai en ligne conformément à la norme EN 15610:2009 relative au mesurage de la rugosité acoustique des rails
NF EN 15610:2019 Applications ferroviaires - Acoustique - Mesurage de la rugosité des rails et des roues relative à la génération du bruit de roulement
NF EN 623-4:2005 Céramiques techniques avancées - Céramiques monolithiques - Propriétés générales et texturales - Partie 4 : détermination de la rugosité de surface
NF B41-205*NF EN 623-4:2005 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4 : guidance on the determination of surface roughness

Professional Standard - Chemical Industry, How to measure roughness

HG/T 2348-1992 The stylus method for measuring surface roughness of polyester film for magnetic tape

ES-AENOR, How to measure roughness

Standard Association of Australia （SAA）, How to measure roughness

AS/NZS 1301.441s:1998 Methods of test for pulp and paper - Sheffield roughness of paper and board
AS/NZS 1301.441:2018 Methods of test for pulp and paper, Method 441: Determination of roughness/smoothness (air leak methods) — Sheffield method (ISO 8791-3:2017, MOD)
AS 1301.439:2019 Methods of test for pulp and paper, Method 439: Bendtsen roughness of paper and paperboard (ISO 8791-2:2013, MOD)

ES-UNE, How to measure roughness

UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)
UNE-ISO 8791-2:2021 Paper and board. Determination of roughness/smoothness (air leak methods). Part 2: Bendtsen method
UNE-ISO 8791-1:2021 Paper and board. Determination of roughness/smoothness (air leak methods). Part 1: General method
UNE-ISO 8791-4:2018 Paper and board. Determination of roughness/smoothness (air leak methods). Part 4: Print-surf method
UNE-EN 15610:2020 Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
UNE-CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions (Endorsed by AENOR in August of 2016.)
UNE-EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness (Endorsed by AENOR in December of 2004.)

IT-UNI, How to measure roughness

UNI ISO 8791-4:2021 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

KR-KS, How to measure roughness

KS M ISO 8791-2-2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-3-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3-2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-1-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 9184-6-2017 Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness
KS M ISO 8791-2-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-4-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

国家市场监督管理总局、中国国家标准化管理委员会, How to measure roughness

GB/T 40389-2021 Sintered metal materials, excluding hardmetals—Measurement of surface roughness

AGMA - American Gear Manufacturers Association, How to measure roughness

14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines

American Gear Manufacturers Association, How to measure roughness

AGMA 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines

Lithuanian Standards Office , How to measure roughness

LST EN 10049-2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN 15610-2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
LST EN 623-4-2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness

European Committee for Standardization (CEN), How to measure roughness

EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
PD CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
PD CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness@ track decay rates and transfer functions
DD ENV 623-4-1993 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 4: Determination of Surface Roughness

CEN - European Committee for Standardization, How to measure roughness

EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
PREN 15610-2017 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation

AASHTO - American Association of State Highway and Transportation Officials, How to measure roughness

T286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness (Twentieth Edition; ASTM E1082-90)
T286-1990 Standard Specification for Measurement of Vehicular Response to Traveled Surface Roughness (Eighteenth Edition; ASTM E 1082-90)
T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness (ASTM Designation E 1082-90(1995); No Replacement)

AWS - American Welding Society, How to measure roughness

C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces

Professional Standard - Press and Publication, How to measure roughness

CY/T 104.7-2014 Printing technology paper and board test methods for printability part 7: roughness of printing

GM Global, How to measure roughness

GMW 16676-2012 Surface Roughness (Drawing Entry, Measuring Conditions, Profile Filters, Parameters) Issue 1; English