ZH
RU
ES

how about roughness

how about roughness, Total:497 items.

In the international standard classification, how about roughness involves: Linear and angular measurements, Gears, Paper and board, Vocabularies, Rubber and plastics products, Wood technology processes, Insulating fluids, Chipless working equipment, Iron and steel products, Plastics, Construction materials, Products of the textile industry, Mechanical testing, Coatings and related processes used in aerospace industry, Aerospace engines and propulsion systems, Flexible drives and transmissions, Manufacturing forming processes, Conducting materials, Equipment for the metallurgical industry, Wood, sawlogs and sawn timber, Surface treatment and coating, Road engineering, Wood-based panels, Machine tool systems, Semiconducting materials, Screw threads, Technical drawings, Testing of metals, Road vehicles in general, Bearings, Fasteners, Paper products, Powder metallurgy, Optics and optical measurements, Photography, Acoustics and acoustic measurements, Construction of railways, Pulps, Optical equipment, Ceramics, Rails and railway components, Graphic technology.

NL-NEN, how about roughness

NEN 3636-1980 Surface roughness - Roughness comparison specimens
NEN 3635-1980 Surface roughness - Measurement of fla roughness value
LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method
NEN 1839-1989 Paper - Determination of paper surface roughness with water

RO-ASRO, how about roughness

STAS R 6859-1968
STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
STAS 12192-1984 G?ARS Choice or precisions and roughness gear
STAS 11124-1978 GROUND TALC General technical requirements for crudity
STAS 2700/13-1989 Threaded fasteners RADII UNDER HEAD AND ROUGHNESSES
STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS
STAS ISO 1879:1993 Instrumets for the measurement of surface roughness by the profile method. Vocabulary
STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS

SE-SIS, how about roughness

SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS SS 81 73 46-1989 Doors — Sizes, flatness, squareness and roughness — Requirements
SIS SMS 672-1964
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS 02 11 09-1982 Measurement in building - Surface roughness - Expression of profile measurement
SIS SS-ISO 4287/1:1988 Surface roughness - Terminology - Part 1: Surface and its parameters
SIS SS-ISO 4288:1988 Rules and procedures for the measure- ment of surface roughness using stylus instruments
SIS SS-ISO 468:1988 Surface roughness - Parameters, their values and general rules for specifying requirements
SIS SS-ISO 2632-1:1989 Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed
SIS SS-ISO 2632-2:1989 Roughness comparison specimens — Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished

German Institute for Standardization, how about roughness

DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21
DIN 16747:1981 Roughness of the moulding surfaces of compression moulds and injection moulds
DIN 53108:2018 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 53108:2011 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 53108:1995 Testing of paper and board - Determination of roughness according to Bendtsen
DIN 40686 Bb.2:1983 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN 267-2:2017 Fasteners - Technical specification, surface roughness for product classes A and B
DIN 54530-10:2000-02 Paper and board - Testing of cores - Part 10: Determination of surface roughness
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products; German version EN 10049:2013
DIN 267-2:2017-06 Fasteners - Technical specification, surface roughness for product classes A and B
DIN ISO 8791-4:2008 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007)
DIN 54530-10:2000 Paper and board - Testing of cores - Part 10: Determination of surface roughness
DIN ISO 23519:2015-12 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN 40686 Beiblatt 2:1983-08 Surfaces of dense ceramic components for electrical engineering; determination of surface roughness
DIN 31699:1986 Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness
DIN ISO 8791-4:2023-08 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2021)
DIN ISO 23519:2015 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN CEN/TR 15874:2016-09*DIN SPEC 45659:2016-09 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009; German version CEN/TR 15874:2009
DIN 267-6:1975 Fasteners and similar parts; technical specifications, finishes and tolerances for product grade F
DIN CEN/TR 16891:2017-03*DIN SPEC 38451:2017-03 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions; German version CEN/TR 16891:2016
DIN EN 15610:2021-11 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation; German version EN 15610:2019
DIN EN 15610:2017 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation; German and English version prEN 15610:2017

HU-MSZT, how about roughness

CU-NC, how about roughness

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

TR-TSE, how about roughness

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY
TS 3429-1979 PAPER AND BOARD - RECOMMENDED PROCEDURE FOR THE DETERMINATION OF ROUGHNESS - CONSTANT - PRESSURE - AIR - METHOD
TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH
TS 2578-1977 Roughness Comparison Specimens PART 1 : Turned, Ground, Bored, Milled, Shaped And Planed

Taiwan Provincial Standard of the People's Republic of China, how about roughness

CNS 7868-1981 Surface Roughness
CNS 10793-1984 Roughness Comparison Specimens
CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, how about roughness

GB/T 2679.4-1994 Paper and board-Determination of the roughness(Bendtsen method)
GB/T 14234-1993 Surface roughness for plastic parts
GB/T 13841-1992 Surface roughness for electronic ceramic parts
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 1031-1995 Surface ronghness parameters and their values
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 11357-1989 Quality,Surfaceroughness and balance of transmission pulleys
GB/T 11357-2008 Quality,roughness and balance of transmission pulleys
GB/T 6060.1-1997 Roughness comparison specimens. Cast surfaces
GB/T 42671-2023 Test method for surface roughness of carbon materials
GB/T 12472-1990 Surface roughness--Parameters and their values for wooden pieces
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
GB/T 2523-1990 Cold rolled sheet(strip)--Measuring method for surface roughness
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 6060.3-1986 Roughness comparison specimens--Spark-erosion machining surfaces
GB/T 29505-2013 Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 9146-2003 General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan
GB/T 2679.9-1993 Paper and board.Determination of roughness(Print-surface method)
GB/T 131-1993 Mechanical drawings--Surface roughness symbols and methods of indicating
GB/T 12767-1991 Powder metallurgy products--Surface roughness--Parameters and their values
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 6060.5-1988 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the detdrmination of the surface profile.
GB/T 22881-2008 Paper and board.Determination of roughness/smoothness(air leak methods).General method
GB/T 32642-2016 Flat panel displays glass substrate surface roughness measurement method
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 13288-1991 The assessment of profile grades of steel surface before application of paint and related products.Comparator
GB/T 6060.2-1985 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
GB/T 6060.2-2006 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed
GB/T 2523-2008 Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip)
GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
GB/T 30860-2014 Test methods for surface roughness and saw mark of silicon wafers for solar cells
GB/T 31199-2014 Surface roughness parameters measurement for CTP plate substrate
GB/T 32189-2015 Atomic Force Microscopy Examination of Surface Roughness of Gallium Nitride Single Crystal Substrate
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 22363-2008 Paper and board.Determination of roughness（air leak methods）.Bendtsen method and print-surf method
GB/T 31226-2014 Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components

SAE - SAE International, how about roughness

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay

Society of Automotive Engineers (SAE), how about roughness

SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY
SAE AS291F-2014 Surface Texture, Roughness, Waviness and Lay
SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE AS291E-1964 (Noncurrent)Surface Texture, Roughness, Waviness and Lay Reaffirmed Noncurrent October 2001

Korean Agency for Technology and Standards (KATS), how about roughness

KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0161-1999 Surface roughness-Definitions and designation
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0162-2013 Surface roughness－Terminology－Part 1：Surface and its parameters
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS B 0507-1975(2011) Roughness Comparison Specimens
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0501-2016 Instruments for the measurement of surfaceroughness by the stylus method－Profile method
KS M 4058-2021 Determination of stylus contact method of paper and board — Surface roughness
KS F 2373-2010(2020) Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS F 2373-2000 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS M ISO 8791-2:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-2:2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-1:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 8791-3:2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3:2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-2:2008 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 2:Bendtsen method
KS M ISO 8791-1:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 1：General method
KS M ISO 9184-6:2007 Paper, board and pulps－Fibre furnish analysis－Part 6：Determination of fibre coarseness
KS M ISO 9184-6:2017 Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness
KS M ISO 8791-3:2006 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 3:Sheffield method
KS M ISO 8791-4:2008 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 4：Print-surf method
KS M ISO 8503-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile o
KS M ISO 8791-4:2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
KS B ISO 12129-2:2002 Plain bearings－Part 2：Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

CH-SNV, how about roughness

VSM 15338.1-1955

CZ-CSN, how about roughness

CSN 01 4456-1983 Surface rouglmess of castings
CSN 73 2520-1993 Surface roughness of stmctures
CSN ON 01 4452-1962
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN ON 28 2109-1964
CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
CSN ON 13 0060-1962
CSN 49 0169-1986 Method for determination surface roughness of particle boards
CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements
CSN 49 2654-1985 Fibreboards. Determination of quality of surface finish (roughness)
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification
CSN 49 0211-1987 Suríace roughness of wood products nnd wood based materials
CSN 49 2654-1975 Determtltatlon of surfaci? finish (roughness) of wood fitare butlding Ihuirds
CSN 49 0212-1988 Wood surface roughness comparison specimens of wood. Technical requirements
CSN 50 0379-1976 Paper testing methods. Smoothnees (roughnese) of páper by Bendtsen method
CSN ISO 8791-1:1993 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 1: General method
CSN ISO 8791-4:1994 Paper and board-Determination of roughness/smoothness(air leak methods)-Part 4:Print-surf method
CSN ISO 2632-1:1994 Roughness comparison specimens.Part 1:Turned,ground,milled,shaped and planed
CSN 49 0231-1993 Allowance for machining of sawn timber and dimension timber. Surface roughness of wooden and wood-based pro- ducts
CSN ISO 468:1993 Surface roughness. Parameters, their values and general rules for specifying requirements
CSN ISO 2632-2:1994 Roughness comparison specimens.Part 2:Spark-eroded,shot-blasted and polished

Professional Standard - Aviation, how about roughness

HB 6172-1988 General Surface Roughness
HB 7786-2005 General requirements for precision and surface roughness of chemically milled parts
HB 5647-1998 Labeling, Tolerance and Surface Roughness of Blade Airfoil
HB 8233-2002 Limit deviations of size and requirements of surface roughness for rubber parts
HB 7748-2004 Requirement for selection and interrelation of dimension tolerance,geometrical tolerance and surface roughness

YU-JUS, how about roughness

JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process
JUS M.A1.010-1983 Surface roughness. Terminology. Surface and its parameters
JUS M.A1.020-1981 Surface roughness ofindustrial products. Terms and definations
JUS M.A1.024-1981 Sur face roughness of industrial products. Classification of surface fktws
JUS M.A1.027-1981 Surface roughness ofindustrial products. Classification ofscraped surfaces.
JUS H.N8.151-1989 Testing of paper and board. Determination of roughness/smoothness (air leak methods). General method

Danish Standards Foundation, how about roughness

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness
DS/ISO 2632/3:1981 Roughness comparison specimens. Part 3: Cast surfaces
DS/ISO 4287/1:1986 Surface roughness Terminology Part 1: Surface and its parametres
DS/ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method. Vocabulary
DS/ISO 4288:1986 Rules and procedures for the measurement of surface roughness parametres using stylus instruments
DS 1103.11:1982 Test methods for rigid flat sheets. Surface finish (roughness) and surface stability
DS/ISO 2632-1:1989 Roughness comparison specimens. Part 1: Turned, ground, bored, milled, shaped and planed
DS/EN 10049:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DS/ISO 468:1986 Surface roughness. Parameters, their values and general rules for specifying requirements
DS/EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
DS/CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009

RU-GOST R, how about roughness

GOST 7016-2013 Products of wood and wood materials. Roughness parameters
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 16241-1970 Chill moulds. Roughness of surface
GOST 21293-1975 Surface finish heated core boxes. Parameters
GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
GOST 13355-1974 Metal core boxes and casting patterns. Surface finish
GOST 15612-2013 Products from wood and wood materials. Methods for determination of roughness parametrs
GOST 7016-1982 Products of wood and wooden materials. Parameters of surface roughness
GOST 33101-2014 Automobile roads of general use. Road pavement. Roughness measurement methods
GOST 30115-1995 Paper and board. Determination of roughness/smoothness (air leak methods). General method
GOST 18961-1980 Diamond needles for suface roughness measurements. Technical conditions
GOST 9378-1975 Surface roughness comparison specimens. Technical requirements
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

IN-BIS, how about roughness

IS 3073-1967
IS 9894-1981
IS 10707-1983
IS 11166-1993 Permissible deviation on dimensions, surface roughness and mass of steel casting process
IS 11275-1985
IS 11315 Pt.4-1987
IS 4290 Pt.3-1992 Roughness comparison specimens. Part 3: Cast surfaces (First Revision)

Japanese Industrial Standards Committee (JISC), how about roughness

JIS B 0659:1996 Roughness comparison specimens
JIS K 7104:1976 Methods for comparison of surface roughness of plastics
JIS B 0601:1994 Surface roughness -- Definitions and designation
JIS B 0652:1973 Instruments for the measurement of surface roughness by the interferometric method
JIS B 0660:1998 Surface roughness -- Terminology -- Part 1: Surface and its parameters
JIS P 8151:2004 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Print-surf method
JIS B 0090-8:2013 Preparation of drawings for optical elements and systems -- Part 8: Surface texture; roughness and waviness
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy

Professional Standard - Military and Civilian Products, how about roughness

WJ/Z 314-1991 Fuze parts surface roughness

AASHTO - American Association of State Highway and Transportation Officials, how about roughness

PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements
R 43-2013 Standard Practice for Quantifying Roughness of Pavements
R 43M/R 43-2007 Standard Practice for Quantifying Roughness of Pavements
PP 37M-1999 Standard Practice for Quantifying Roughness of Pavements
PP37-1999 Standard Practice for Determining Roughness of Pavements
PP37-2000 Standard Practice for Quantifying Roughness of Pavements (2000 Edition)
T286-1990 Standard Specification for Measurement of Vehicular Response to Traveled Surface Roughness (Eighteenth Edition; ASTM E 1082-90)
T286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness (Twentieth Edition; ASTM E1082-90)

International Organization for Standardization (ISO), how about roughness

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition
ISO 3546:1976 Fibre building boards; Determination of surface finish (roughness)
ISO 2632-3:1979 Roughness comparison specimens — Part 3: Cast surfaces
ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO 1879:1974 Title missing - Legacy paper document
ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
ISO 1879:2009 Instruments for the measurement of surface roughness by the profile method; Vocabulary Bilingual edition
ISO 8791-5:2020 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
ISO 2494:1974 Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method
ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
ISO 2632-1:1985 Roughness comparison specimens; Part 1 : Turned, ground, bored, milled, shaped and planed
ISO/FDIS 24118-1:1964 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 24118-1:2023 Paper and board — Stylus contact method — Part 1: Determination of surface roughness
ISO 4287-1:1984 Surface roughness; Terminology; Part 1 : Surface and its parameters Trilingual edition
ISO 8791-4:2007 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-2:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 2: Bendtsen method
ISO 8791-1:1986 Paper and board; Determination of roughness/smoothness (air leak methods); Part 1 : General method
ISO 8791-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method
ISO 8791-3:2017 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
ISO 8791-2:2013 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method
ISO 2632-2:1977 Roughness comparison specimens — Part 2: Spark-eroded, shot blasted and grit blasted, and polished
ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 3: Sheffield method
ISO 8791-3:1990 Paper and board; determination of roughness/smoothness (air leak methods); part 3: Sheffield method
ISO 8791-4:1992 Paper and board; determination of roughness/smoothness (air leak methods); part 4: print-surf method
ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
ISO 2632-1:1975 Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed
ISO 468:1982 Surface roughness; Parameters, their values and general rules for specifying requirements
ISO 12129-2:1995 Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasi
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
ISO 1880:1974 Title missing - Legacy paper document
ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of progressive profile transformation; Profile recording instruments
ISO 2632-2:1985 Roughness comparison specimens; Part 2 : Spark-eroded, shot-blasted and grit-blasted, and polished

BR-ABNT, how about roughness

ABNT NB-93-1964

AT-ON, how about roughness

ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM M 1118-1986 Technical surjaces; roughness comparison specimens
ONORM M 1115-1986 Technical surfaces; terms, definitions, roughness parameters
ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 1114-1982 Measurement of surface roughness with contact (Stylus) Instruments

Professional Standard - Light Industry, how about roughness

QB/T 1056-1991 Bendtsen roughness tester

Standard Association of Australia （SAA）, how about roughness

AS 2382:1981 Surface roughness comparison specimens
HB 259.1-2001 Guidelines for road condition monitoring - Pavement roughness
AS/NZS 1301.439s:2007 Methods of test for pulp and paper - Bendtsen roughness of paper and paperboard
AS/NZS 1301.441s:1998 Methods of test for pulp and paper - Sheffield roughness of paper and board

轻工业部, how about roughness

QB 1056-1991 Bentson roughness tester

GM North America, how about roughness

GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay

AIA/NAS - Aerospace Industries Association of America Inc., how about roughness

NAS30-1956 Surface Roughness Designation (Rev 4)
NAS31-1958 Conversion Table@ Surface Roughness Designations (Rev 1)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, how about roughness

GB/T 15056-2017 Casting surface roughness—Appraising method

Indonesia Standards, how about roughness

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI ISO 8791-4:2010 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4:Print-surf method
SNI 05-2182-1991 Surface-roughness equipment by instan touch type and phases transformation profile methods

American Society for Testing and Materials (ASTM), how about roughness

ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM E1448-92(2004) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1215-93(2003) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM B946-23 Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
ASTM E1364-95(2000) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM E1215-93(2007) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(1998) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E1082-90(1995) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-98 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-98(2003) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1082-90(2017) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1926-08(2015) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E1448-92(1998) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1448/E1448M-09(2023) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

AENOR, how about roughness

UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)
UNE 82305-3:1991 ROUGHNESS COMPARISON SPECIMENS. PART 3: CAST SURFACES.
UNE 82303:1991 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROFILE METHOD. VOCABULARY
UNE 57080-2:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOOTHNESS. PART 2: BENDTSEN METHOD
UNE 57080-1:1988 PAPER AND BOARD. DETERMINATION OF ROUGHNESS/SMOTHNESS. PART 1: GENERAL METHOD
UNE 57080-4:2006 Paper and board. Determination of roughness/smoothness. Part 4: Parker Print-surf method.
UNE 57080-2/1M:2002 Paper and board. Determination of roughness/smoothness (air leak methods). Part 2: Bendtsen method.
UNE 82301:1986 SURFACE ROUGHNESS. PARAMETERS, THEIR VALUES AND GENERAL RULES FOR SPECIFYING REQUIREMENTS
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
UNE 82305-1:1991 ROUGHNESS COMPARISON SPECIMENS. PART 1: TURNED, GROUND, BORED, MILLED, SHAPED AND PLANED
UNE-EN 15610:2010 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation

VN-TCVN, how about roughness

TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

CO-ICONTEC, how about roughness

ICONTEC 1510/1-1979

AGMA - American Gear Manufacturers Association, how about roughness

12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting
04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior
07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting
14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines
118.01-1973 Information Sheet Gear Tooth Surface Texture for Aerospace Gearing (Surface Roughness@ Waviness@ Form and Lay)

(U.S.) Ford Automotive Standards, how about roughness

FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

Group Standards of the People's Republic of China, how about roughness

T/SBX 064-2022 Virtual roughness meter system for skin pass unit

American Society of Mechanical Engineers (ASME), how about roughness

ASME B46.1-1995 Surface Texture, Surface Roughness Waviness and Lay (B46.1 - 1995)
ASME B46.1-1985 Surface texture (surface roughness, waviness, and lay)
ASME B46.1-1978 Surface Texture (Surface Roughness, Waviness, and Lay)
ASME B46.1-1962 Surface Texture (Surface Roughness, Waviness, and Lay)
ASME B46.1-2002 Surface texture (surface roughness, waviness, and lay)
ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)
ASME B46.1-2019 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)

American National Standards Institute （ANSI), how about roughness

ANSI/ASME B46.1-2009 Surface Texture, Surface Roughness, Waviness and Lay

Association of German Mechanical Engineers, how about roughness

VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure
DVS 2303-3-2009
DVS 2303-3-2000
VDI/VDE 2602-1983 Roughness measurement with electric contact (stylus) profile meters
VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments
VDI/VDE 2602 Blatt 4-2014 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
VDI/VDE 2655 Blatt 1.1-2008 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI/VDE 2655 Blatt 1.2-2010 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement

IT-UNI, how about roughness

UNI 3963-P2-1978
UNI ISO 8791-4:2021 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

National Metrological Technical Specifications of the People's Republic of China, how about roughness

JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens
JJF 1210-1990 Surface Roughness Benchmark Operation Technical Specifications
JJF 1105-2003 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method
JJF 1105-2018 Calibration Specification for Contact (Stylus) Instruments of Surface Roughness Measurement by the Profile Method

National Metrological Verification Regulations of the People's Republic of China, how about roughness

JJG 2018-1989 Verification Scheme of Measuring Instruments for Surface Roughness

国家市场监督管理总局、中国国家标准化管理委员会, how about roughness

GB/T 11357-2020 Quality, roughness and balance of transmission pulleys
GB/T 6060.1-2018 Surface roughness comparison specimen—Part 1: Casting surface
GB/T 40389-2021 Sintered metal materials, excluding hardmetals—Measurement of surface roughness

PL-PKN, how about roughness

PN M01146-1989 Engineering drawings. Indication of roughness and waviness of surface
PN D04206-1987 Particleboard and fibreboard Determination of surface roughness
PN M04251-1987 Geometrie surface structure Surface roughness Numerical values of parameters
PN M04256-02-1987 Geometrie surface structure Surface roughness General terminology
PN M04256-03-1987 Geometrie surface structure Surface roughness Terminology of measurements

ESDU - Engineering Sciences Data Unit, how about roughness

ESDU 84030 C-1993 Longitudinal turbulence intensities over terrain with roughness changes.
ESDU 84030 C-2012 Longitudinal turbulence intensities over terrain with roughness changes
ESDU 84011 D-2012 Wind speed profiles over terrain with roughness changes
ESDU 84011 D-1993 Wind speed profiles over terrain with roughness changes.
ESDU 86035 E-2011 Integral length scales of turbulence over flat terrain with roughness changes
ESDU 74027-1974 The effect of surface roughness on the fatigue limit of steels (at zero mean stress).
ESDU 79014 A-2007 Losses caused by friction in straight pipes with systematic roughness elements.
ESDU 09016-2013 Use of local-flow conditions for calculation of roughness-particle height in transition strips on wings
ESDU 79014-1979 LOSSES CAUSED BY FRICTION IN STRAIGHT PIPES WITH SYSTEMATIC ROUGHNESS ELEMENTS
ESDU 01008 A-2002 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes
ESDU 01008 B-2005 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes.
ESDU 01008-2001 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes
ESDU 01008 C-2010 Computer program for wind speeds and turbulence properties: flat or hilly sites in terrain with roughness changes

British Standards Institution (BSI), how about roughness

BS EN 1370:1997 Founding - Surface roughness inspection by visual tactile comparators
BS 4420:1990 Method for determination of the Bendtsen roughness of paper and board
BS ISO 8791-5:2020 Paper and board. Determination of roughness/smoothness (air leak methods) - Oken method
BS ISO 8791-4:2008 Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS ISO 8791-3:2005 Paper and board - Determination of roughness/smoothness (air leak methods) - Sheffield method
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method
BS ISO 8791-3:2017 Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 2634-1:1987 Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-1:2010 Roughness comparison specimens. Part 1: Specification for turned, ground, bored, milled, shaped and planed specimens
BS ISO 8791-4:2021 Tracked Changes. Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS EN 10049:2005 Measurement of roughness average - Ra and peak count RPc on metallic flat products
19/30357540 DC BS ISO 8791-5. Paper and board. Determination of roughness/smoothness (air leak methods). Part 5. Oken method
20/30380002 DC BS ISO 8791-4. Paper and board. Determination of roughness/smoothness (air leak methods). Part 4. Print-surf method
BS ISO 12129-2:1995 Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
BS EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of surface roughness
BS PD CEN/TR 15874:2009 Railway applications — Noise emission — Road test of standard for rail roughness measurement EN 15610:2009
21/30434709 DC BS ISO 24118-1. Paper and board. Stylus contact method - Part 1. Determination of surface roughness
22/30458026 DC BS ISO 24118-1. Paper and board. Stylus contact method. Part 1. Determination of surface roughness

The American Road & Transportation Builders Association, how about roughness

AASHTO R 43-2013 Standard Practice for Quantifying Roughness of Pavements
AASHTO PP37-2000 Standard Practice for Quantifying Roughness of Pavements 2000 Edition

Professional Standard - Machinery, how about roughness

JB/T 7781-1995 Plastic molding mold surface type and roughness
JB/T 7976-1999 Instrument for the measurement of surface roughness by the profile method.Terms
JB/T 7976-2010 Instrument for the measurement of surface roughness by the profile method-Terms
JB/T 8204-1996 Rolling bearing laser ball surface roughness measuring instrument
JB/T 7051-2006 Rolling bearings parts.Methods for the measurement and assessment of surface roughness
JB/T 7051-1993 Measuring and evaluating method of surface roughness of rolling bearing parts

American Gear Manufacturers Association, how about roughness

AGMA 07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting
AGMA 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior
AGMA 14FTM03-2014 Surface Roughness Measurements of Cylindrical Gears and Bevel Gears on Gear Inspection Machines

未注明发布机构, how about roughness

DIN EN ISO 8503-1:1995 Surface roughness characteristics of blast-cleaned steel substrates
DIN EN 1370:1997 Surface roughness inspection by visual tactile comparators
GJB 9248-2017 Optical component surface roughness detection method Interferometry

BE-NBN, how about roughness

NBN 863-1970

European Committee for Standardization (CEN), how about roughness

EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators
EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
PD CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
CEN/TR 15874:2009 Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
PD CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness@ track decay rates and transfer functions

Association Francaise de Normalisation, how about roughness

NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
NF P98-608:1989 Horizontal road markings. Markings applied on the roads. Roughness : in situ test method.
NF EN 10049:2014 Mesure de la rugosité moyenne Ra et du nombre de pics RPc sur les produits plats métalliques
NF ISO 8791-4:2021 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 4 : méthode Print-surf
NF ISO 8791-2:2014 Papier et carton - Détermination de la rugosité/du lissé (méthodes du débit d'air) - Partie 2 : méthode Bendtsen
NF Q03-079-4:2021 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4 : print-surf method
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products
NF Q03-049:1972 Paper and board tests. Determination of roughness. Constant pressure air flow method.
NF Q03-079-2*NF ISO 8791-2:2014 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2 : Bendtsen method
NF A45-000:2006 Measurement of roughness average Ra and peak count RPc on metallic flat products.
NF F01-522*NF EN 15610:2019 Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
FD F01-874*FD CEN/TR 15874:2011 Railway application - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009
NF F01-522:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation.
FD F01-891*FD CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions
FD CEN/TR 16891:2016 Applications ferroviaires - Acoustique - Méthode de mesurage pour la rugosité combinée, les taux de décroissance de la voie et les fonctions de transfert
NF T35-503-1*NF EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abr

IPC - Association Connecting Electronics Industries, how about roughness

IPC TM-650 2.2.17-1990 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)
IPC TM-650 2.2.17A-2001 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)

Canadian Standards Association (CSA), how about roughness

CSA B95-1962-1962 Surface Texture (Roughness, Waviness, and Lay) ASA B46.1-1962; BS 1134-1961 R(1996)

Professional Standard - Electron, how about roughness

SJ/T 11503-2015 Test methods for measuring surface roughness of polished monocrystalline silicon carbide wafers

API - American Petroleum Institute, how about roughness

API PUBL 4459-1987 Surface Roughness Effects on Heavier-Than-Air Gas Diffusion

Professional Standard - Chemical Industry, how about roughness

HG/T 2348-1992 The stylus method for measuring surface roughness of polyester film for magnetic tape

ES-AENOR, how about roughness

Professional Standard - Railway, how about roughness

TB/Z 8-1985 Relationship between Surface Roughness and Tolerance of Communication Signal Products

ES-UNE, how about roughness

UNE-ISO 8791-2:2021 Paper and board. Determination of roughness/smoothness (air leak methods). Part 2: Bendtsen method
UNE-EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)
UNE-ISO 8791-1:2021 Paper and board. Determination of roughness/smoothness (air leak methods). Part 1: General method
UNE-ISO 8791-4:2018 Paper and board. Determination of roughness/smoothness (air leak methods). Part 4: Print-surf method
UNE-EN 15610:2020 Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
UNE-CEN/TR 16891:2016 Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions (Endorsed by AENOR in August of 2016.)

Professional Standard - Nuclear Industry, how about roughness

EJ/T 787-1993 Inspection method for external dimensions and roughness of sintered uranium dioxide pellets

KR-KS, how about roughness

KS M ISO 8791-2-2022 Paper and boar — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
KS M ISO 8791-3-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 3：Sheffield method
KS M ISO 8791-3-2022 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
KS M ISO 8791-1-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
KS M ISO 9184-6-2017 Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness
KS M ISO 8791-2-2016 Paper and board－Determination of roughness/smoothness (air leak methods)－Part 2：Bendtsen method
KS M ISO 8791-4-2018 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

The Society for Protective Coatings (SSPC), how about roughness

SSPC PA 17-2012 Procedure for Determining Conformance to Steel Profile/Surface Roughness/Peak Count Requirements

SSPC - The Society for Protective Coatings, how about roughness

PA 17-2012 Procedure for Determining Conformance to Steel Profile/Surface Roughness/Peak Count Requirements

AWS - American Welding Society, how about roughness

C4.1G- Oxygen Cutting Surface Roughness Gauge (Plastic) (See also AWS C4.1 Set and AWS C4.1-WC)
C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces

Institute of Interconnecting and Packaging Electronic Circuits (IPC), how about roughness

IPC TM-650 2.2.17-2001 Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique) Revision A

Lithuanian Standards Office , how about roughness

LST EN 10049-2006 Measurement of roughness average Ra and peak count RPc on metallic flat products
LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
LST EN 15610-2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation

CEN - European Committee for Standardization, how about roughness

EN 10049:2005 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
PREN 15610-2017 Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., how about roughness

ASHRAE AB-10-001-2010 Influence of Test Section Entrance Conditions on Straight Flat Oval Duct Apparent Relative Roughness

Professional Standard - Press and Publication, how about roughness

CY/T 104.7-2014 Printing technology paper and board test methods for printability part 7: roughness of printing

Aerospace Industries Association, how about roughness

AIA NAS 30-1956 (Inactive)Surface Roughness Designation Superseded - September 1956 (Use MIL-STD-10) (Rev. 4)