ZH
RU
ES

Tensile parameters

Tensile parameters, Total:500 items.

In the international standard classification, Tensile parameters involves: Electricity. Magnetism. Electrical and magnetic measurements, Machine tools, Geology. Meteorology. Hydrology, Road vehicle systems, Metrology and measurement in general, Mechanical testing, Equipment for petroleum and natural gas industries, Industrial automation systems, Measurement of fluid flow, Electric traction equipment, Medical sciences and health care facilities in general, Linear and angular measurements, Water quality, Electronic tubes, Special measuring equipment for use in telecommunications, Optical equipment, Medical equipment, Optics and optical measurements, Chipless working equipment, Testing of metals, Mining equipment, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Pumps, Textile machinery, Radiation measurements, Hydraulic energy engineering, Thermodynamics and temperature measurements, Gears, Optoelectronics. Laser equipment, Springs, Non-destructive testing, Structures of buildings, Measurement of force, weight and pressure, Road engineering, Astronomy. Geodesy. Geography, Building accessories, Vocabularies, Rectifiers. Convertors. Stabilized power supply, Fluid power systems, Natural gas, Graphical symbols, Nuclear energy engineering, Construction technology, Railway rolling stock, Valves, Internal combustion engines, Internal combustion engines for road vehicles, Power transmission and distribution networks, Agricultural machines, implements and equipment, Shipbuilding and marine structures in general, Wind turbine systems and other alternative sources of energy, Postal services, Continuous handling equipment, Fibre optic communications, Bridge construction, Analytical chemistry, Occupational safety. Industrial hygiene, Transformers. Reactors, Rubber and plastics products, Ergonomics, Tyres, Electrical wires and cables, Fasteners, Telecommunication systems, Milk and milk products, Glass, Cereals, pulses and derived products, TESTING, Power stations in general, Aids for disabled or handicapped persons, Telecommunication terminal equipment, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Piezoelectric and dielectric devices, Burners. Boilers, Construction equipment, Products of the textile industry, Paints and varnishes, Integrated circuits. Microelectronics, Galvanic cells and batteries, Acoustics and acoustic measurements, Wood-based panels, Rotating machinery, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE.

RO-ASRO, Tensile parameters

STAS 11734-1980 DRAWING HYDRAULIC PRESSE Main parameters
STAS 11925-1990 Agricultural tractors. Main parameters
STAS 11279/2-1987 WELDING TRACTORS Basic parameters
STAS 11279/4-1980 UNIVERSAL TRACTORS FOR THERMAL CUTTING Basic parameters
STAS 12226/2-1986 AGRICULTURAL TRACTORS Machine coupling devices Main parameters
STAS 11725-1980 KNUCLE (JOINT) PRESS Main parameters
STAS 11744-1980 Mecanical presses HIGH SPEED PRESSE Main parameters
STAS 10637-1988 Agricultural tractors machines and trailers HYDRAULIC SYSTEM Alain parameters
STAS 11742-1980 DROP FORGING MECHANICAL PRESSE Main parameters
STAS 11740-1980 MECHANICAL CUTTING PRESSE Main parameters
STAS 11739-1980 EXCENTRIC TRIMMING MACHINE PRESSE Main parameters
STAS 7777-1988 Hydrostatic drives APPARATUS Main parameters
STAS 11730-1980 BURRING HYDRAULIC PRESSE Main parameters
STAS 7780-1988 Hydroslation drives FILTERS Main paramrtcrs
STAS 7778-1988 Hydrostatic drives ACCUMULATORS Main parameters
STAS 12517-1987 Funiculars DEVICES FOR CABLES STAYIKG AND COUPLING Types and main parameters
STAS 8700-1970 Aggregated machine-tools POWER UNITS FOR FACING Basic parameters
STAS 7783-1967
STAS 7787-1967
STAS 10179-1980 Mechanical presses OPEN BED ECCENTRIC PRESSES Main parameters
STAS 8980-1984 Fluid power systems TELESCOPIC CYLINDERS Basic parameters
STAS 7784-1967
STAS 7779-1988 Hydrostatic and pneumostatic drives GYLINDERS Main parameters
STAS 12415/1-1986 Hydraulic fluid power PHD 1 TYPE GEAR PUMPS Basic dimensions
STAS 12508/2-1986 HELIGAL. TENSION SPRINGS Dimensions and mam parameters lor spnims with wire diameler from 0.50 mm to 14 mm
STAS 7785-1967
STAS 10827-1987 METALLIC TANKS UNDER PRESSURE FOR BUILDING INSTALLATIONS Main dimensions
STAS 8725-1970 Aggregated machine-tools UNIT-HEADS FOR MILLING Basic parameters
STAS 7786-1967
STAS 2888/9-1980 Standard gaugc freight car GRAVITY DISCHARGE FREIGHT CARS liasic parameters
STAS 336/2-1988 WOO D Elastic modulus determination at tensile stress parallcl to grains
STAS 7789-1967
STAS 7651/3-1973 SELF-ALIGNING THRUST ROLLER BEARINGS, ASIMETRIC ROLLERS Dimensions serie 94 Basic dimensions
STAS 11809-1980 Machines and equipments for digging SCARIFIERS MOUNTED ON TRACTORS Main parameters
STAS 7781-1967

PL-PKN, Tensile parameters

PN M78431-1973 Powered industrial trucks Industrials tractors Basic parameters
PN R36116-1974 Agrfcultural tractors Power hydraulic system main parameters and re?nirements
PN M44005-1985 Rotodynamic pumps easurement of characteristic arameters
PN S76008-1990 Measuring instruments for motor vehicles and tractors Manometers Re?uirements and test
PN E04160 ArkusZ81-1973 Electric cables Methods of ?esting Wave parame?ers test
PN M44109-1972 Horizon?al rotodynamic helicoidal pumps asic parameters and .sphere ot applica- ion
PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN M69240-1974 Pressure regulators for welding processes Principal parameters
PN G03359-1989 Apparatus for radioactivity logging Classification, essential parameters and genera? technical requirements
PN E04070-17-1986 Power transformers Test methods Determination of noise parameters
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN G46802-1989 Underground mine locomotives Accumulator electric locomotives Basic parametres
PN M44102-1968 Rotodynamic diagonal pumps asic parameters and sphere of appli- a?ion
PN M47046-1986 Hydrokinetic tor?ue convertors for onstruction machinery asic parameters
PN M55690-1987 Machines for plastic forming of metais Screw presses Principal parameters
PN M55750-1986 Machines for plastic forming of metals Screw presses Principal parameters
PN T92706-1985 Aerodrome direction finders -- Classification, principal parameters, general technical requirements and methods of test

Group Standards of the People's Republic of China, Tensile parameters

T/ZJDJ 005-2022 Digital display electric parameter measuring instrument
T/GDC 172-2022 Lifewave health parameter detector
T/ZPP 045-2023 Multi-parameter online water quality monitor
T/SXBX 001-2023 Production logging four-parameter combination logging tool
T/QGCML 330-2022 Calibration procedure for mine gas outburst parameter instrument
T/CECS 10101-2020 Multi-parameter indoor environment monitoring instrument for civil buildings
T/QGCML 935-2023 Portable High Sensitivity Multi-parameter Gas Detector
T/ZMDS 10011-2021 Method of measuring the parameters of near-infrared cerebral tissue oximeter
T/CPASE MT006-2019 The elevator balance coefficient test base on wire ropes tension
T/NXJX 014.1-2021 NC assembly press-Part 1：Types and basic parameters
T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester

Professional Standard - Machinery, Tensile parameters

JB/T 4136.1-1999 Meter lathe parameters
JB/T 3367.1-1999 Horizontal internal broaching machines parameters
JB/T 4182.1-1999 Vertical internal broaching machine parameters
JB/T 4181.1-1999 Vertical external broaching machine parameters
JB/T 8077.1-1999 Broaching edge grinding machine parameters
JB/T 7440-1994 Die-casting technique parameter tester
JB/T 5669-1991 Digital force gauge
JB/T 10564-2006 Basic parameters for flow measuring instruments
JB/T 9346-1999 Basic parameters for spectrophotometer
JB/T 3367.1-2014 Horizontal internal broaching machines.Part 1: Parameters
JB/T 4181.1-2014 Vertical external broaching machines.Part 1: Parameters
JB/T 6266-1992 Optical comparator for angle measurement - Basic parameter
JB/T 8493-1996 Double-action hydraulic drawing press for sheet metal Basic parameters
JB/T 10574-2006 Optical length measuring instruments - Basic parameters
JB/T 9399-1999 Main parameter series for the X-ray analytical instrumentation
JB/T 9399-2010 Main parameter series for the X-ray analytical instrumentation
JB/T 10574-2013 Basic parameters of optical length measuring instruments
JB/T 2547-1991 Double disk friction press parameters
JB/T 4182.1-2011 Vertical internal broaching machines.Part 1:Types and parameters
JB/T 8231-1999 The basic parameters of the plane-gratings spectrographs
JB/T 9330-1999 The basic parameter for diaphragm plate of optical instrument
JB/T 5844-1991 Parameter symbols for power semiconductor devices
JB/T 2474-1999 Hydraulic screw press Basic parameters
JB/T 6277.1-1992 Types and basic parameters of rubber-tyred carts
JB/T 8387-2010 Non-destructive testing instruments.Main parameter for the industrial detection X-ray tube
JB/T 11575.1-2013 Handarbour instrumental lathe.Part 1: Styles and parameters
JB/T 9740.2-1999 Types and basic parameters for low speed wind energy conversion system
JB/T 5247.2-1998 Bench press type and main parameter
JB/T 10592-2006 Tractor diesel engines.Cooling water radiators.Types, parameters and connecting dimensions
JB/T 6176-1992 Basic parameter of photographic plate cassette and cassette frame for spectrograph
JB/T 10790.1-2007 CNC creep feed profile grinding machines.Part 1: Types and parameters
JB/T 12019-2014 General specification for multi-parameter field fast food quality analyzer
JB/T 5814.2-2008 Equipments for electdc wires and cables.Basic parametem.Part 2: Drawing machines
JB/T 5814.2-1991 Basic parameters of special equipment for wire and cable Part 2: Pulling equipment
JB/T 7808-2010 Non-destructive testing instruments Main parameter series for the industrial X-ray equipment
JB/T 12297.1-2015 Hydraulic rapidly press.Part 1: Basic parameters
JB/T 2936.1-1999 Types and basic parameters of closed-frame cold extrusion presses
JB/T 1647-1999 Types of closed single point, double points press and basic parameters
JB/T 2547.2-2010 Friction screw press.Part 2:Basic parameter
JB/T 12771.1-2015 Pneumatic press.Part 1: Types and basic parameters
JB/T 10780-2007 Specification and technical requirements for 750kV oil-immersed power transformers
JB/T 5247.2-2011 Bench mechanical power presses.Part 2: Types and basic parameters
JB/T 1647.1-2012 Straight-sided mechanical power press.Part 1: Types and basic parameters
JB/T 1769-1999 Types of closed single point, double points edge cutting machine and basic parameters
JB/T 1769-2014 Straight-side single or two-point trimming press.Type and parameter
JB/T 12020-2014 Inspection criteria for reagent kits used for multi-parameter field fast food quality analyzer
JB/T 12296.1-2015 Four-column overhead cylinder structure press.Part 1: Basic parameters
JB/T 3857-1999 Type and basic data of horizontal winding machine for transformer
JB/T 2462.22-1999 Universal parts for combined machine tools Pneumatic unit head Parameters and dimensions

Professional Standard - Ocean, Tensile parameters

HY/T 126-2009 Multiparameter water quality monitor
HY/T 271-2018 Testing methods of marine multi-parameter water-quality monitoring instrument

能源部, Tensile parameters

SY/T 5097-1991 Drilling multi-parameter instrument

RU-GOST R, Tensile parameters

GOST 3480-1976 Power take-off for agricultural tractors and power input connection for agricultural machines. Types and main parameters
GOST 23012-1978 Devices multiposition counting indicated and sivitching. Basic parameters
GOST 9847-1979 Optical instruments for surface roughness parameters measuring. Basis parameters and types
GOST 27854-1988 Rotoduhatic pumps. Mach parameters series
GOST 28683-1990 Setting stenters. Types and main parameters
GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST 25678-1983 Instruments for measurements of pulse laser energy. Types. Basic parameters. Methods for measurement of basic parameters
GOST 26354-1984 Pouring magnetodynamic devices. Basic parametrs
GOST 22091.0-1984 X-ray devices. General requirements for measuring of parameters
GOST 25851-1983 Radiometric instruments. Methods of main parameters measurement
GOST 20271.1-1991 Microwave electronic devices. Methods of measuring electrical parameters
GOST 21107.4-1975 Gas discharge devices. Ignitrons. Methods for measurement of parameters
GOST 28953-1991 Photosensitive charge transfer device. Measuring methods for parameters
GOST 24151-1987 Inclinometers. Types. Main parameters and general technical requirements
GOST 22223-1976 Shut-off device for pressur gauges. Main technical data
GOST 20271.3-1991 Microwave electronic devices. Methods of measuring of modulating impulse parameters
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 21107.1-1975 Gas discharge devices. Methods of measurement of electrical parameters of stabilizing tube
GOST 23667-1985 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
GOST 10677-2001 Rear three point linkage system for agricultural tractors with nominal traction force from 0,6-8. Types, basic parameters and dimensions
GOST 10677-1982 Rear three point linkage system for agricultural tractors with nominal traction force from 0,6-8. Types, basis parameters and dimensions
GOST 22381-1977 Pneumatic tube systems. Types, overall parameters and dimensions
GOST R 50355-1992 Digital instruments to measure immittance parameters. General technical requirements and methods of tests
GOST R 51614-2000 Rear three-point linkage systems for agricultural tractors of traction class 0,2. Basic parameters and dimensions
GOST 20760-1975 Technical diagnosis. Tractors. Parameters and quality attributes of the technical condition
GOST 26025-1983 Agricultural and forestrymachines and tractors. Measuring methods of constructive parameters
GOST R 54784-2011 Testing agricultural tractors and machines. Methods for estimation of technical parameters
GOST 21107.14-1980 Gas discharge devices. Methods of the measurement of electrical parameters of tacitrons
GOST 10026-1987 Straight side single-action one point presses. Parameters and dimensions
GOST 12678-1980 Direct-acting pressure regulators. Main parameters
GOST 25174-1982 Rubber pressure hoses with textile reinborcement. Parameters and dimensions
GOST 26689-1985 Injection moulding machines. Methods of technological parameters control
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 14213-1989 Logging cable tips, sonde heads and logging tools heads. Types, main parameters, dimensions and technical requirements
GOST 25641-1984 Pneumatic tyres for tractors and agricultural machinery. Basic parametres and dimensions
GOST 3481-1979 Agricultural tractors. Drawbar assembly. Types, main parameters and dimensions
GOST 21107.7-1975 Gas discharge devices. Methods of measurement of electrical parameters of spark discharges
GOST 21107.8-1976 Gas discharge devices. Measuring methods of electrical characteristics of impulsive diodes
GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
GOST 28134-1989 Electrodynamic seismometers. Types, basic parameters and technical requirements
GOST R 55809-2013 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
GOST ISO 2320-2015 Prevailing torque type steel nuts. Mechanical and performance properties
GOST 16015-1991 Semiautomatic horisontal broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 16025-1991 Semiautomatic vertical broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 20228-1974 Torque converters for commercial vehicles, buses and tractors. Basic parameters
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 17173-1981 Spectral slits and attachments to them. Types, basic parameters and dimensions. Technical requirements
GOST 26874-1986 Ionizing radiation power spectrometers. Methods of basic parameters measurement
GOST 28524-1990 Mobile means of small-scale mechanization of agricultural works. Power take-off and power intake connections of small-sized uniaxial tractors (motoblocks). Main parameters and dimensions
GOST R 51415-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using a alveograph
GOST 713-1988 Screw presses. Parameters and dimensions, norms of accuracy
GOST 25909-1985 Automatic presses for finishing stamping. Basic parameters and dimensions
GOST 11357-1989 Fine-modul bevel gear testers. Types and main specifications. Accuracy norms
GOST 5368-1981 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits
GOST 21107.3-1975 Gas discharge devices. Decatrons. Polyatrons. Methods for measurement of electrical parameters
GOST 21107.6-1975 Gas discharge devices. Methods of measurement of electrical parameters of charactes display
GOST R 51646-2000 Rehabilitation telephonies means of communication for disable persons with violations of hearing or eyesight. Classification. Basic parameters
GOST 8247-1984 Double-acting two-crank presses. Basic parameters and dimensions
GOST 17394-1979 Wide profile tyres with adjusted pressure. Main parameters and dimensions
GOST 23800-1979 Stand for control of technological parameters of die - casting. General technical specifications
GOST 26216-1984 Hydrodynamic torque converters for road-building machines. Basic parameters
GOST 9459-1987 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits
GOST R 57395-2017 Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST R 50728-1995 Lead-acid storage starter battaries 12 V for motor-tractors. Types, basic parameters and dimensions
GOST R 51648-2000 Acoustic and tactile signals for traflic lights for vision and vision-and-hearing impaired persons. Parameters
GOST 13766-1986 Cylindrical helical compression (tension) springs of I class and of 1 category made of round steel. Main parameters of coils
GOST 13768-1986 Cylindrical helical compression (tension) springs of I class 3 category made of round steel. Main parameters of coils
GOST 13769-1986 Cylindrical helical compression springs of I class and of 4 category made of round steel. Main parameters of coils
GOST 13770-1986 Cylindrical helical compression (tension) springs of II class and of 1 category made of round steel. Main parameters of coils
GOST 13771-1986 Cylindrical helical compression (tension) springs of II class and of 2 category made of round steel. Main parameters of coils
GOST 13773-1986 Cylindrical helical compression springs of II class and of 4 category made of round steel. Main parameters of coils
GOST 13774-1986 Cylindrical helical compression springs of III class and of 1 category made of round steel. Main parameters of coils
GOST 13776-1986 Cylindrical helical compression springs of III class and of 3 category made of round steel. Main parameters of coils
GOST 9222-1987 Simple action cpen two-crank presses. Basic parameters and dimensions

(U.S.) Telecommunications Industries Association , Tensile parameters

TIA-455-28-C-1999 FOTP-28 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Tension

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tensile parameters

GB/T 13970-1992 Basic parameter series of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 13970-2008 Basic parameter terms of digital instruments
GB/T 1314-1991 Basic parameters for flow measuring instruments
GB/T 3720-1988 Optical length measuring instruments--Basic parameters
GB/T 1973.2-1989 Small cylindrically coiled tension spring--Dimensions and parameters
GB/T 2088-2009 Cylindrical coiled tension spring dimensions and parameters
GB/T 1973.2-2005 Small cylindrically coiled tension spring dimension and parameters
GB/T 15966-2007 Primary parameter and general specification for hydrologic instrument
GB/T 15966-1995 Primary parameter and general specification for hydrologic instrument
GB/T 4142-2001 Cylindrically coiled tension spring dimensionsand parameters(Ring profile with Hook)
GB/T 15406-1994 Primary parameters and general technical specifications for geotechnical apparatus
GB/T 14347-1993 Open front mechanical power presses Types and basic parameters
GB/T 7180-1987 Basic parameters of electric locomotives of railway trunk lines
GB/T 5837-2008 Fluid coupling.Types and basic specifications
GB/T 14347-2009 Open front mechanical power presses.Types and basic parameters
GB/T 5837-1993 Fluid coupling. types and basic specifications
GB/T 6821-1986 Basic parameters of double-turbine torque converter
GB/T 2087-2001 Cylindrically coiled tension spring dimensions and parameters (Half ring profile with hook)
GB/T 6574-1986 Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines
GB/T 15406-2007 Primary parameter and general specification for geotechnical engineering instrument
GB/T 8116-1987 Wind-generating sets--Type and basic parameters
GB/T 3690-2009 Textile conveyor belts-Full thickness tensile strength,elongation at break and elongation at the reference load-Test method
GB/T 3871.2-2006 Agricultural tractors.Test procedures.Part 2: Measurements of tractor parameters
GB/T 26829-2011 Indoor method for testing measurement Range of pulse laser rangefinders
GB/T 10228-1997 Specification and technical requirements for dry-type power transformers
GB/T 10228-2008 Specification and technical requirements for dry-type power transformers
GB/T 10228-2015 Specification and technical requirements for dry-type power transformers
GB/T 10228-2023 Technical parameters and requirements for dry-type power transformers
GB/T 35091-2018 Straight-sided high-speed mechanical power presses.Types and basic parameters
GB/T 2088-1997 Cylindrically coiled tension spring dimensions and parameters
GB/T 6451-2008 Specification and technical requirements for oil-immersed power transformers
GB/T 25141-2010 Self-priming type rotodynamic pumps.Types and basic parameters
GB/T 25028-2010(英文版) Wheel loader—Booster using for brake system—Technical specifications
GB/T 6451-2015 Oil-immersed power transformer technical parameters and requirements
GB/T 6451-2023 Technical parameters and requirements of oil-immersed power transformers
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/T 6451-1999(XG1-2002) Specification and technical requirements for three-phase oil immersed power transformers
GB/T 16274-1996 Specification and technical requirements for oil immersed power transformers 500KV
GB/T 6451-1995 Specification and technical requirements for three-phase oil immersed power transformers
GB/T 16492-1996 Optics and optical instruments--Environmental requirements. General information, definitions, climatic zones and their parameters
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 3871.2-1993 Test methods for agricultural wheeled and tracklaying tractors. Part 2: Measurements of tractor parameters
GB/T 10429-1989 Single-stage centripetal turbine hydrodynamic torque converters--Types and basic parameters
GB/T 10429-2006 Single-stage centripetal turbine torque converters. Types and basic parameters

Defense Logistics Agency, Tensile parameters

DLA A-A-59400 A VALID NOTICE 2-2012 Tester, Spring Resiliency (Push/Pull Force Gauge)

CZ-CSN, Tensile parameters

CSN 28 1005-1964 Parameters of electric locomotives
CSN 11 3005-1988 Hydrodynamic pumps. Series of basic parameters
CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
CSN 47 9002-1990 Lawn and garden tractors. Types main parameters
CSN 28 1111-1966 Parametere of electrio haulage mine locomotives
CSN 26 8860-1987 Industrial power trucks. Basic parameters
CSN 26 8804-1984 Powered industrial trucks Basic parameters
CSN 26 8840-1984 Industrial electric trucks. Basic parame- ters
CSN 30 7060-1987 Tractors. Three—point linkage. Kinema- tic parameters and technical requirements
CSN 27 8116-1985 Earth — moving machinery Hydrodynamic converters Basic parameters
CSN 30 7053-1982 Tractors. Towing arrangoment. Basic parameters and dimensions. Demands. Location
CSN ON 24 3395-1963
CSN 26 9600-1981 Stable bracket and shelf racks with mechanical attendance Parameters
CSN 30 5107-1988 Manometers and automotive pressure gauges. Main and attachment dimensions
CSN 30 0431-1984 Tractors and agricultural machines. Hydraulic system Connceting and functional parameters.
CSN 04 6515-1982 Pressure die castings and pressure die casting dies. Technical parameters.
CSN 11 9001-1988 Hydrostatic and pneumostatic machinery. Parameters and quantities. Terms, symbols and definitions of quantities
CSN 47 0187-1992 Agricultural and forestry machines and tractors. Measuring methods of construction parameters
CSN 35 1090-1987 Power transformers.Methods of measuring the dielectric parameters of insulation
CSN 47 8611-1987 Milking machine installations. Milk meters. Types, parameters and technical requirements
CSN 25 2300-1972 Classification of instruments and devices or measurement of the geometrical arameters of surface finish
CSN 21 0601-1981 Eccentric, crank andtoggle presses.Series of mainparameters
CSN 85 2104 Zb-1987

Professional Standard - Petroleum, Tensile parameters

SY/T 6971-2013 Multi-parameter drilling instrumentation testing equipment
SY/T 6739-2008 Technical specifications of drilling parameter monitor
SY/T 5097-2006 Technical specifications of multi. parameter monitoring instrument of drilling/servicing rig
SY/T 5097-1996 Technical conditions of multi-parameter instrument for drilling (workover) well
SY 5097-2006 Technical conditions of multi-parameter instrument for drilling (workover) well
SY 6146-1995 Drilling parameter instrumentation driller operation combination
SY/T 5377-2013 Specifications for drilling fluid testing instruments
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment
SY/T 6146-1995 Drilling parameter instrument driller operation combination platform
SY/T 6739-2014 Petroleum drilling parameter monitoring instrument general specification
SY 6739-2014 General Technical Specifications for Petroleum Drilling Parameter Monitor
SY/T 5234-1991 Calculation Method of Hydraulic Parameters in Jet Drilling
SY/T 6954-2013 Standard test method for high temperature oxidation kinetic parameters for heavy oil.Thermogravimetric method

National Metrological Verification Regulations of the People's Republic of China, Tensile parameters

JJG(民航) 035-1996 Verification Regulation of ИВП Ouput Parameter Test Set
JJG(铁道) 150-2009 Measuring instrument for contact wire geometric parameter
JJG(电子) 31010-2007 Verification Regulations for Precision Analyzer of Semiconductor Parameters
JJG(机械) 9-1990 Verification rules for comprehensive parameter measuring instrument of washing machine
JJG(交通) 113-2014 Testing System of Single-wheel Sideway Force Coefficient
JJG 113-2014 Single Wheel Lateral Force Coefficient Tester
JJG(石油) 42-1996 Verification Regulation of Petroleum Tubular Thread Single Parameter Gage
JJG(电子) 310004-2006 Specification for verification of transistor h parameter testers
JJG(电子) 31012-2007 Verification Regulations for Integrated Operational Amplifier Parameter Tester
JJG(电子) 18005-1991 Verification Regulations for DA-1 Electrical Safety Parameter Tester
JJG 725-1991 Verification Regulation of DC and LF Characterization Tester for Transister
JJG(电子) 04006-1987 BJ2913 Model Field Effect Tube Parameter Tester Trial Verification Regulations
JJG(电子) 310002-2006 Specification for verification of DC parameter testers for semiconductor discrete devices
JJG(电子) 310003-2006 Specification for verification of capacitor parameter testers for semiconductor discrete devices
JJG 516-1987 Verification Regulation of Model BJ2920(HQ2)Digital DC Characterization Tester for Bipolor Transister
JJG(电子) 04046-1995 Verification regulations for QC-13 type field effect transistor transconductance parameter tester
JJG(电子) 04004-1987 BJ2911 (HQ-1B) Transistor Comprehensive Parameter Tester Trial Verification Regulations
JJG(电子) 04005-1987 JSS-4A Transistor Low Frequency H Parameter Tester Trial Verification Regulations
JJG(电子) 04010-1987 BJ2961 Transistor Integrated Circuit Dynamic Parameter Tester Trial Verification Regulations

Professional Standard - Railway, Tensile parameters

TB/T 3227-2010 Measuring instruments for contact wire geometry

Military Standard of the People's Republic of China-General Armament Department, Tensile parameters

GJB 8860-2016 Calibration procedures for multi-parameter monitors
GJB 2740-1996 Pulse laser rangefinder parameter series
GJB 7513-2012 Human body tolerance parameters of shoulder belt inertia forced tightening mechanism
GJB 8361-2015 Parameter testing method of military laser power energy testing instrument

卫生健康委员会, Tensile parameters

WS/T 659-2019 Multi-parameter monitor safety management

工业和信息化部/国家能源局, Tensile parameters

JB/T 13046-2017 Oil pipe thread parameter measuring instrument
JB/T 12720-2016 Technical specifications for in-situ tensile tester for solid materials
JB/T 4136.1-2017 Instrument Lathes Part 1: Types and Parameters
JB/T 13547.1-2018 Electromagnetic Press Part 1: Basic Parameters
JB/T 13105.1-2017 Right-angle double column vertical external broaching machine Part 1: Type and parameters
JB/T 12994.1-2017 Rapid thin plate stamping and drawing hydraulic press Part 1: Type and basic parameters

IT-UNI, Tensile parameters

Professional Standard - Construction Industry, Tensile parameters

JG/T 329-2011 Apparantus of concrete thermal coefficient

Professional Standard - Military and Civilian Products, Tensile parameters

WJ 2098-1992 Pulse laser range finder parameter series
WJ 9047-2004 Calibration specification for electric parameter tester of industrial electric detonator

International Organization for Standardization (ISO), Tensile parameters

ISO/TS 20758:2019 Traditional Chinese medicine — Abdominal physiological parameter detectors
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
ISO 16844-7:2022 Road vehicles — Tachograph systems — Part 7: Parameters
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish

British Standards Institution (BSI), Tensile parameters

PD ISO/TS 20758:2019 Traditional Chinese medicine. Abdominal physiological parameter detectors
BS ISO 16844-7:2022 Tracked Changes. Road vehicles. Tachograph systems. Parameters
BS ISO 22705-2:2023 Springs. Measurement and test parameters - Cold formed cylindrical helical extension springs
BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
BS EN 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical power meter
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS 7604-1:1992 Method for determination of stress-optical coefficient of glass. Tensile test
21/30430252 DC BS ISO 16844-7. Road vehicles. Tachograph systems. Part 7. Parameters
BS EN IEC 61290-1-1:2020 Optical amplifiers. Test methods - Power and gain parameters. Optical spectrum analyzer method
BS EN 61290-10-5:2014 Optical amplifiers. Test methods. Multichannel parameters. Distributed Raman amplifier gain and noise figure
BS EN 60444-5:1995 Measurement of quartz crystal unit parameters - Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS EN 60444-5:1997 Measurement of quartz crystal unit parameters. Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS EN 61290-3-2:2003 Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Electrical spectrum analyzer method
BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
BS DD CEN/TS 635-4:2007 Plywood - Classification by surface appearance - Parameters of ability for finishing, guideline

工业和信息化部, Tensile parameters

JBT13738-2019 Portable multi-parameter water quality analyzer
JB/T 13738-2019 Portable multi-parameter water quality analyzer
JB/T 2474-2018 Basic parameters of hydraulic screw press
YD/T 3954-2021 Cloud service user data protection capability reference framework
JB/T 13901.1-2020 Mechanical Servo CNC Rotary Head Press Part 1: Basic Parameters

AENOR, Tensile parameters

UNE 82502:2007 Instruments intended to measure braking forces in service motor vehicles: Roller brake meters.

National Metrological Technical Specifications of the People's Republic of China, Tensile parameters

JJF 1491-2014 Calibration Specification for Digital AC Electrical Parameters Meter
JJF 1470-2014 Calibration Specification for Multiparameter Physiological Simulators
JJF(石化)018-2019 Calibration specification for rubber tensile and cold resistance coefficient tester
JJF 2009-2022 Calibration Specification for Semiconductor Parameters Precision Analyzers
JJF(机械) 018-2008 Calibration specification for comprehensive parameter tester of washing machine
JJF 1063-2000 Calibration Specification for Instruments of Thread Inspection of Casing,Tubing,Line Pipe and New Rotary Shouldered Connection
JJF(建材) 164-2020 Calibration specification for on-site photothermal parameter measuring instrument for architectural glass
JJF(机械) 1070-2021 Calibration specification for zinc oxide surge arrester DC parameter tester
JJF(机械)1070-2021

国家能源局, Tensile parameters

NB/T 10169-2019 Mining hoist operating parameter tester
NB/T 10171-2019 Technical conditions of mining water pump operating parameter tester
SY/T 6739-2021 General technical conditions for oil drilling parameter monitors
NB/T 10170-2019 Technical conditions of mine main ventilator operating parameter tester
SY/T 6954-2020 Method for determination of crude oil oxidation kinetic parameters
NB/T 10503-2021 Double lifting point arc gate back-pull hydraulic hoist series parameters
NB/T 10172-2019 Technical conditions of mining air compressor operating parameter tester

能源, Tensile parameters

NB/T 51036-2015 Portable mine water multi-parameter tester

Professional Standard - Chemical Industry, Tensile parameters

HG/T 3243-1987 Technical specifications of tensile stress relaxometer of vulcanized rubber
HG/T 3243-2005 Technical specifications for tensile stress relax meter of vulcanized rubber

国家发展和改革委员会, Tensile parameters

HG/T 3243-2006 Technical conditions for vulcanized rubber tensile stress relaxation instrument

Professional Standard - Aerospace, Tensile parameters

QJ 1293A-1998 Aerodynamic parameter symbols
QJ 1294-1987 Paremeters and symbols of guidedmissile flight dynamics
QJ 1023-1986 Strain gauge force sensor parameter series
QJ 1916.5-1990 Aerodynamic database data element codes of major aerodynamic reference publications at home and abroad
QJ 2015-1990 Symbols and codes of physical parameters commonly used in aerodynamics

Professional Standard - Surveying and Mapping, Tensile parameters

CH 8006-1991 The series of analogue qlotter and its basic parameters

Professional Standard - Water Conservancy, Tensile parameters

SL 120-1995 Calibrating methods of sonic parameter measuring apparatus
SL 120-2012 Calibrating method for rock acoustic parameter measuring apparatus
SL 144.2-2008 Calibration method of multi-parameter water quality sonde
SL 136-2017 Calibration method of concrete thermal parameter tester
SL 571-2013 Test method of hydraulic parameters of water saving irrigation equipment
SL 402-2007 Hydraulic model series and parameters of axial-flow pump system

CN-QIYE, Tensile parameters

Q/GDW 654-2011 Calibration specification for transmission line parameter tester

TR-TSE, Tensile parameters

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER
TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH

American Society for Testing and Materials (ASTM), Tensile parameters

ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

AT-ON, Tensile parameters

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 7300-1990 Calculatlon of boilers and pressure vessels; design parameters, permissible Stresses

邯郸市, Tensile parameters

DB1304/T 348-2020 Detection method of flow parameters of coal mine pipeline gas drainage comprehensive parameter measuring instrument

YU-JUS, Tensile parameters

JUS M.A1.032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish

Professional Standard - Electron, Tensile parameters

SJ 20234-1993 Verification regulation of model HP4145A semiconductor parameter analyzer
SJ/T 10196-1991 Measuring methods of MSI and SSI digital IC static parameter testers
SJ/T 10439-1993 Test methods for bipolar transister DC parameter testers
SJ 20490-1995 General specification for military mobile communication synthesis parameter tester
SJ/T 10195-1991 General specification for MSI and SSI digital IC static parameter test instrument
SJ/T 10438-1993 General specification for bipolar transister DC parameter testers
SJ 20232-1993 Verification regulation of KDK double gate FET Gp tester

Jilin Provincial Standard of the People's Republic of China, Tensile parameters

DB22/T 2032-2014 Specifications for quality control of medical multi-parameter monitors

水利部, Tensile parameters

SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument

German Institute for Standardization, Tensile parameters

DIN 16086:2006 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN 16086:2006-01 Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
DIN 70003:1993-08 Vibrational stress; measurement of parameters on vehicle parts
DIN 70003:1993 Vibrational stress; measurement of parameters on vehicle parts
DIN 33411-1:1982 Physical strenghts of man; concepts, interrelations, defining parameters
DIN 33411-1:1982-09 Physical strengths of man; concepts, interrelations, defining parameters
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
DIN EN 61290-3-1:2004-05 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN EN 61290-3-2:2009-06 Optical amplifier - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2008); German version EN 61290-3-2:2008 / Note: DIN EN 61290-3-2 (2003-08) remains valid alongside this standard until 2011-10-01....
DIN 52314:1977 Testing of glass; tensile test for the determination of stress optical coefficient

Professional Standard - Traffic, Tensile parameters

JT/T 921-2014 Testing system of single - wheel sideway force coefficient
JT/T 89-1994 Basic parameter series of pneumatic conveying system of port grain suction machine

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Tensile parameters

GJB 6241-2008 Test method of dynamic parameters of laser beam-riding guidance instrument

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Tensile parameters

GB/T 15966-2017 Primary parameters and general technical conditions for hydrologic instruments
GB/T 3690-2017 Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method

国防科学技术工业委员会, Tensile parameters

WJ/T 9047-2004 Calibration specifications for industrial electric detonator electrical parameter testers

GOSTR, Tensile parameters

GOST 9879-1976 Ship's power transformers. Basic parameters
GOST 24469-1980 Instruments for measurements laser radiation parameters. General technical requirements
GOST R 58866-2020 Instrument rolling bearings. Methods for controlling geometrical parameters of bearing parts

Korean Agency for Technology and Standards (KATS), Tensile parameters

KS B ISO 10100-2003(2008) Hydraulic fluid power－Cylinders－Acceptance tests
KS I ISO 15970:2010 Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
KS R ISO 16844-7-2017(2022) Road vehicles－Tachograph systems－Part 7：Parameters
KS C IEC 61290-3-1-2005(2020) Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
KS C IEC 61290-3-1:2005 Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
KS D 8512-2003 Method of determining the tensile strain hardening exponent for metallic sheet and strip
KS B ISO 10275:2009 Metallic materials－Sheet and strip－Determination of tensile strain hardening exponent

Professional Standard - Nuclear Industry, Tensile parameters

EJ/T 1050-1997 Graphical symbols, writing abbreviations and parameter symbols for nuclear instruments
EJ/T 1050-2012 Graphical symbols, text codes and parameter symbols of nuclear instruments

VN-TCVN, Tensile parameters

TCVN 1085-1986 Screw presses.Basic parameters and dimensions
TCVN 4724-1989 Crank and knee-joint presses.Range of basic parameters
TCVN 2850-1979 Hot stamping crank presses.Basic parameters and dimensions
TCVN 2853-1979 Single action open two crank presses.Basic parameters and dimensions
TCVN 3588-1981 Straight side single action one poinfpressed.Basic para meters and dimensions
TCVN 3758-1983 Straight side double action one point presses.Basic parameters and dimensions

Professional Standard - Electricity, Tensile parameters

DL/T 1119-2010 General technical conditions of measuring instruments for power frequency parameters of transmission lines
DL/T 2621-2023
DL/T 990-2005 Series parameters for of back pull hydraulic hoist (cylinder) of radial gate of dual-lifting point
DL/T 1003-2006 The measurement of lubricating parameters for thrust bearing of hydro-generator unit

Professional Standard - Coal, Tensile parameters

MT/T 642-1996 Specifications for Comprehensive Parameter Tester for Pipeline Gas Drainage

KR-KS, Tensile parameters

KS R ISO 16844-7-2017 Road vehicles－Tachograph systems－Part 7：Parameters

Professional Standard-Ships, Tensile parameters

CB 20073-2012 Normalized aerodynamic parameters of assisted torpedo
CB/T 1123-2005 Axial turbine hydrodynamic torque converter--Basic parameters
CB 1123-1984 Basic parameters of axial flow torque converter series
CB/T 3102-2013 Basic parameter of transverse thruster with controllable-pitch propeller
CB 3102-1981 Basic parameters of adjustable pitch propeller lateral thrust device
CB* 3102-1981 Basic parameters of adjustable pitch propeller lateral thrust device

ESDU - Engineering Sciences Data Unit, Tensile parameters

ESDU 83001 A-1983 Approximate parametric method for propeller thrust estimation.
ESDU 72014-1972 Determination of the principal stresses and strains in a plane stress field from strain gauge data.

Professional Standard - Automobile, Tensile parameters

QC/T 500-1999 Types, parameters and dimensions of pressure gauges for automobiles

Association Francaise de Normalisation, Tensile parameters

NF EN 12896-8:2019 Transports publics - Modèle de données de référence - Partie 8 : tableaux de bord et statistiques
NF C93-805-1-2*NF EN 61290-1-2:2006 Optical amplifiers - Test methods - Part 1-2 : power and gain parameters - Electrical spectrum analyzer method.
NF C93-805-3-1*NF EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1 : noise figure parameters - Optical spectrum analyzer method
NF EN 61290-3-1:2004 Amplificateurs optiques - Méthodes d'essai - Partie 3-1 : paramètres du facteur de bruit - Méthode d'analyseur du spectre optique
NF EN 61290-3-2:2009 Amplificateurs optiques - Méthodes d'essais - Partie 3-2 : paramètres du facteur de bruit - Méthode de l'analyseur spectral électrique
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs

International Electrotechnical Commission (IEC), Tensile parameters

IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
IEC 61290-3-2:2003 Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method

Anhui Provincial Standard of the People's Republic of China, Tensile parameters

DB34/T 4052-2021 Construction Technical Regulations for Prestressed Numerically Controlled Tensioning Engineering
DB34/T 3175-2018 Technical specification for prestressed numerical control tensioning construction of highway and waterway engineering

IN-BIS, Tensile parameters

IS 10732-1983

国家市场监督管理总局、中国国家标准化管理委员会, Tensile parameters

GB/T 39960-2021 Straight-sided single-action mechanical power presses—Characteristics and dimensions
GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test

NZ-SNZ, Tensile parameters

AS/NZS 1591.1:1995 Acoustics - Instrumentation for Audiometry Part 1: Reference Zero for the Calibration of Pure-Tone Bone Conduction Audiometers

SAE - SAE International, Tensile parameters

SAE R-465-2018 Liquid Rocket Engine Thrust Chamber Parametric Modeling
SAE J709-2009 Agricultural Tractor Tire Loadings@ Torque Factors@ and Inflation Pressures

SE-SIS, Tensile parameters

SIS SS-ISO 4037:1985 X and y reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy

Professional Standard - Tobacco, Tensile parameters

YC/T 90.1-1996 Tobacco Machinery Metal Detector Part 1: Types and Basic Parameters

National Aeronautics and Space Administration (NASA), Tensile parameters

NASA-TN-D-6643-1972 Aerodynamic parameters of the Navion airplane extracted from flight data

U.S. Air Force, Tensile parameters

AIR FORCE A-A-59480-2004 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE (DIGITAL OR DEADWEIGHT)

North Atlantic Treaty Organization Standards Agency, Tensile parameters

STANAG 4367-2000 THERMODYNAMIC INTERIOR BALLISTIC MODEL WITH GLOBAL PARAMETERS

国家质量监督检验检疫总局, Tensile parameters

SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry

ES-UNE, Tensile parameters

UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN 61290-3-1:2003 Optical amplifiers - Test methods -- Part 3-1: Noise figure parameters - Optical spectrum analyzer method (Endorsed by AENOR in April of 2004.)
UNE-EN 61290-3-2:2008 Optical amplifier test methods -- Part 3-2: Noise figure parameters - Electrical spectrum analyzer method (Endorsed by AENOR in February of 2009.)

Danish Standards Foundation, Tensile parameters

DS/EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
DS/EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish

未注明发布机构, Tensile parameters

BS EN 61290-3-1:2003(2004) Optical amplifiers — Test methods — Part 3 - 1 : Noise figure parameters — Optical spectrum analyzer method

HU-MSZT, Tensile parameters

Society of Automotive Engineers (SAE), Tensile parameters

SAE J709C-1975 Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

United States Navy, Tensile parameters

NAVY MIL-M-19261 (8)-1987 METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE
NAVY MIL-M-19261-1956 METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE

CENELEC - European Committee for Electrotechnical Standardization, Tensile parameters

EN 61290-3-2:2003 Optical amplifiers Part 3-2: Test methods for noise figure parameters Electrical spectrum analyzer method

European Committee for Electrotechnical Standardization（CENELEC）, Tensile parameters

EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method

Japanese Industrial Standards Committee (JISC), Tensile parameters

JIS C 6122-3-2:2006 Optical amplifiers -- Test methods -- Part 3-2: Noise figure parameters -- Electrical spectrum analyzer method

Professional Standard - Energy, Tensile parameters

NB/T 31062-2014 Specification and technical requirements of dry-type transformers for wind turbine applications

Indonesia Standards, Tensile parameters

SNI 05-6047.2-1999 Heat exchangers - Method for parameter measurement for performance determination. Part 2: Fluid pressure

ES-AENOR, Tensile parameters

UNE 68-028-1986

ZA-SANS, Tensile parameters

SANS 10275:2009 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent

International Telecommunication Union (ITU), Tensile parameters

ITU-T Q.2961.3 FRENCH-1997 Digital Subscriber Signalling System No.2 - Additional Traffic Parameters: Signalling Capabilities to Support Traffic Parameters for the Available Bit Rate (ABR) ATM Transfer Capability
ITU-T Q.2961.3 SPANISH-1997 Digital Subscriber Signalling System No.2 - Additional Traffic Parameters: Signalling Capabilities to Support Traffic Parameters for the Available Bit Rate (ABR) ATM Transfer Capability

GB-REG, Tensile parameters

REG NACA-ARR-L5F23-1945 Lifting-surface-theory values of the damping in roll and of the parameter used in estimating aileron stick forces

CU-NC, Tensile parameters

NC 18-33-1984 Passenger and Goods Transport. Parameters for Pass Capacity. Terms and Definitions

Professional Standard - Forestry, Tensile parameters

LY/T 1610.1-2003 Hydraulic seeding-Part 1:Types and basic parameters