ZH
RU
ES

Capacitance Voltammetry Curve

Capacitance Voltammetry Curve, Total:229 items.

In the international standard classification, Capacitance Voltammetry Curve involves: Electrical wires and cables, Transformers. Reactors, Integrated circuits. Microelectronics, Resistors, Capacitors, Nuclear energy engineering, Medical equipment, Electromagnetic compatibility (EMC), Radiation protection, Electronic components in general, Technical drawings, Mechanical structures for electronic equipment, Electrical accessories, Hand-held tools, Lamps and related equipment, Radiocommunications, Telecommunication systems, Semiconductor devices, Semiconducting materials, Telecommunication terminal equipment, Shipbuilding and marine structures in general, Small craft, Applications of information technology.

Aerospace Industries Association/ANSI Aerospace Standards, Capacitance Voltammetry Curve

AIA/NAS NAS 729-1981 Cable, Electrical, Flat Conductor, Flexible - 300 Volts, Copper (Rev. 1)

AT-ON, Capacitance Voltammetry Curve

ONORM E 6022-1990 Low-voltage high-rupturing-capacity fuses; three-pole fuse base racks for L. V.H.R.C.-fuses up to 660 V for busbar mounting
ONORM E 6021-1989 Low-voltage high-rupturing-capacity fuses up to 660 V; LV HRC fuse bases

Underwriters Laboratories (UL), Capacitance Voltammetry Curve

UL 4703-2014 UL Standard for safety Photovoltaic Wire (First Edition)
UL 1414-2000 UL Standard for Safety Capacitors and Suppressors for Radio-and Television-Type Appliances (Sixth Edition)
UL 60384-14-2009 Safety requirements for fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
UL SUBJECT 1712-2006 Outline of Investigation for Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System Issue Number: 4
UL 1414 BULLETIN-2007 UL Standard for Safety Across-the-Line, Antenna Coupling and Line-by-Pass Capacitors for Radio- and Television- Type Appliances COMMENTS DUE: January 28, 2008

American National Standards Institute （ANSI), Capacitance Voltammetry Curve

ANSI C57.12.50-1981 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982
ANSI C57.12.52-1981 Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
ANSI C57.12.51-1981 Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated
ANSI C57.12.57-1987 Transformers - Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Voltage 34 500 Volts and Below, Low-Voltage 216Y/125 and 480Y/277 Volts- Requirements This is Now Copyrighted by IEEE
ANSI C57.12.22-1993 American National Standard for Transformers—Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution TransformersWith High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Voltsand Below; Low Voltage, 480 Volts and Be
ANSI C57.12.21-1992 American National Standard Requirements for Pad-Mounted, Compartmental - Type Self - Cooled, Single - Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low - Voltage, 240/120 Volts; 167 kVA and Sma
ANSI C57.12.25-1990 Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distri- bution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low-Voltage, 240/ 120 Volts; 167 kVA and Smaller - Re
ANSI N43.3-2008 General Radiation Safety - Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies Up to 10 MeV
ANSI T1.207-2000 Telecommunications – Operations, Administration, Maintenance, and Provisioning (OAM&P) – Terminating Test Line Capabilities and Access Arrangements

U.S. Military Regulations and Norms, Capacitance Voltammetry Curve

ARMY UFGS-26 32 33.00 10-2007 UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEM ABOVE 15 KVA CAPACITY
ARMY MIL-DTL-12109/21 B-2011 SOLENOID, ELECTRICAL; CLASS 2 (MACHINE GUN) 7.62 MM, 24 VOLT DC, 8 AMP MAX
ARMY MIL-DTL-12109/8 A VALID NOTICE 1-2008 Solenoid, Electrical; Class 1 (Cannon) 90 MM, 24 Volt DC, 28 AMP Max
ARMY MIL-DTL-12109/5 A VALID NOTICE 1-2008 Solenoid, Electrical; Class 2 (Machine Gun) Cal .30, 24 Volt DC, 4.5 AMP Max
ARMY MIL-DTL-12109/13 A VALID NOTICE 1-2010 Solenoid, Electrical; Class 2 (Machine Gun), Cal .50, 24 Volt DC, 7.7 AMP Max

RO-ASRO, Capacitance Voltammetry Curve

STAS 3184/4-1988 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR ELECTRIC WIRINGS UP TO 380 V AI.TERNATING CURRENT AND 250 V DIRECT CURRENT AND UI' TO 25A Check-up gauges for plugs amlsocket- outlets up to 380 V and 16 A
STAS 3915-1979 Overhead electrical lines \ip to lkV HOLDERS FOR OVERHEAD FUSES UP TO 30 A
STAS 3184/1-1985 PLUGS, SOCKET-OUTLETS ANO GOUPLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNA- TING CURRENT, AND 250 V DIRECT GURRENT AND UP TO 25 A General reqttirements
STAS 3184/3-1985 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR ELECTRIC WI- RINGSUP TO 380 V ALTERNA- TING CURRENT, AND 250 V DI- RECT CURRENT AND UP TO 25 A Shapes and dimensions
STAS 3184/2-1985 PLUGS, SOCKET-OUTLETS'AND COU- PLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNAT1NG CURRENT, AND 250 V DIRECT CURRENT AND UP TO 25 A Rules and test methods
STAS 382-1972 Overhead electrical lines up to 1 kV SUPPORTING AND TRAGTION HORIZONTAL BRACKETS AND AUXILIARY MOUNTING PARTS
STAS 6048/7-1980 Radio interferences ELECTRIC.AL APPARATUS, MACHINES AND INSTALLATIONS Permissible limits of interferences and special conditions for test

Defense Logistics Agency, Capacitance Voltammetry Curve

DLA SMD-5962-92325 REV B-2004 MICROCIRCUIT, LINEAR, 3 AMP, 55 VOLT H-BRIDGE, MONOLITHIC SILICON
DLA SMD-5962-98590 REV D-2008 MICROCIRCUIT, LINEAR, 3.3 VOLT FIXED, 1.3 AMP, POSITIVE VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-89873 REV A-2012 MICROCIRCUIT, LINEAR, FIXED POSITIVE 5 VOLT, 5 AMP VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-96503-1997 MICROCIRCUIT, LINEAR, 5.0 V, 1A STEP-DOWN VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-89587 REV G-2002 MICROCIRCUIT, LINEAR, 1.0 A, LOW DROPOUT 5 V VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-89873-1992 MICROCIRCUIT, LINEAR, FIXED POSITIVE 5 VOLT, 5 AMP VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-96502 REV A-1998 MICROCIRCUIT, LINEAR, +12 V, 1 A STEP DOWN, SWITCHING VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA MIL-DTL-24646/3 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/250 VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, 0-30 AMPERE FUSES, SYMBOLS 540, 541 AND 542
DLA MIL-DTL-24646/2 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/250 VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, 0-30 AMPERE MIDGET FUSES, SYMBOLS 609, 610 AND 611
DLA W-C-596/37 D VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, 3 Pole, 3 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/149 A VALID NOTICE 1-2001 CONNECTOR, PLUG, ELECTRICAL, SPECIFIC PURPOSE, LOCKING, GROUNDING, 2 POLE, 3 WIRE, 30 AMPERES, 28 VOLTS, DIRECT CURRENT
DLA W-C-596/35 D VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, Cable Outlet, 3 Pole, 3 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/161 B VALID NOTICE 2-2013 Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/181 B VALID NOTICE 2-2013 Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz
DLA W-C-596/36 D VALID NOTICE 1-2013 Connector, Receptacle, Electrical, General Purpose, Single, 3 Pole, 3 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/14 D-2001 CONNECTOR, CABLE OUTLET, ELECTRICAL, GENERAL PURPOSE, HOSPITAL GRADE, CABLE CONNECTING, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA DESC-DWG-85031 REV A-1994 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERE, 125 VOLTS, ENVIRONMENTAL
DLA W-C-596/189 B VALID NOTICE 1-2006 Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/205 B VALID NOTICE 2-2013 Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase
DLA DSCC-DWG-84133 REV E-2008 RELAYS, ELECTROMAGNETIC, PERMANENT MAGNET DRIVE, 2PDT, LOW LEVEL TO 5 AMPERES (SIMILAR TO MIL-R-6106/27 EXCEPT FOR 12 V DC COIL AND INVERTED STUD MOUNT)
DLA MIL-C-28777/2 B VALID NOTICE 2-2009 Cable Assembly (Type I), Electronic Test Equipment, (2 Poles, 3 Wires, 125 Volts, 13 Amperes, 50 or 60 Hertz), Grounding Plug Connector and Terminal Lugs
DLA W-C-596/121 B-2012 CONNECTORS, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, 3 POLE, 4 WIRE, 20 AMPERES, 125/250 VOLTS, 50/60 HERTZ
DLA W-C-596/140 D-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, MALE INLET, GENERAL PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA W-C-596/141 D-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, MALE INLET, GENERAL PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 250 VOLTS, 50/60 HERTZ
DLA W-C-596/142 D-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, MALE INLET, GENERAL PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA W-C-596/196 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, GROUNDING, 3 POLE, 4 WIRE, 60 AMPERES, 250 VOLTS, 50/60 HERTZ, 3 PHASE
DLA W-C-596/184 B VALID NOTICE 1-2013 Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/44 D VALID NOTICE 1-2013 CONNECTOR, PLUG, ELECTRICAL, SPECIFIC, PURPOSE, LOCKING, 3 POLE, 3 WIRE, 20 AMPERES, 125/250 VOLTS, 50/60 HERTZ
DLA W-C-596/34 C VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, General Grade, 3 Pole, 3 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/26 C VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, General Grade, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/11 D VALID NOTICE 2-2013 Connector, Receptacle, Electrical, General Purpose, Single Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
DLA MIL-DTL-24646/17 B-2008 FUSE BOXES, FEEDER JUNCTION, SUBMERSIBLE, (15 FEET), 500 VOLTS, ALTERNATING CURRENT, THREE PHASE BUSES, 0-30 AMPERE FUSES SYMBOLS 693.1
DLA A-A-55518/3 C-2011 FUSEHOLDER, BLOCK, 30 AMPERES (A), 250 VOLTS (V) AC, 1 THROUGH 12 POLE, ACCOMMODATES 4AG OR 4AB TYPE FUSE CARTRIDGES
DLA W-C-596/27 D VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, Cable Outlet, General Grade, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz
DLA MIL-DTL-24646/9 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, SUBMERSIBLE, (15 FEET), 250 VOLTS, ALTERNATING CURRENT, SINGLE PHASE BUSES, 0-30 AMPERE FUSES, SYMBOLS 555.1, 556.1, 557.1, 558.1, AND 559.1
DLA A-A-55812 VALID NOTICE 2-2008 Cable Assembly, (Type I), Electronic Test Equipment, (2 Poles, 3 Wires, 125 Volts, 13 Amperes, 50 or 60 Hertz), Grounding Plug Connector
DLA W-C-596/14 D VALID NOTICE 2-2011 Connector, Cable Outlet, Elecrtical, General Purpose, Hospital Grade, Cable Connecting, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/18 D-2012 CONNECTOR, CABLE OUTLET, ELECTRICAL, GENERAL PURPOSE, GENERAL GRADE, CABLE CONNECTING, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 250 VOLTS, 50/60 HERTZ
DLA W-C-596/125 B-2012 CONNECTORS, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, 3 POLE, 4 WIRE, 20 AMPERES, 250 VOLTS, 50/60 HERTZ, 3-PHASE
DLA W-C-596/103 B-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, SINGLE, GROUNDING, 2 POLE, 3 WIRE, 30 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/104 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, LOCKING, 2 POLE, 3 WIRE, 30 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/107 B-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, SINGLE, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/108 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, LOCKING, 2 POLE, 3 WIRE, 20 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/111 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, SINGLE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/112 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, DUPLEX, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/43 D VALID NOTICE 1-2013 Connector, Receptacle, Electrical, Specific Purpose, Single Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/101 D-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, GROUNDING, LOCKING, 2 POLE, 3 WIRE, 15 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA W-C-596/105 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, LOCKING, GROUNDING, 2 POLE, 3 WIRE, 30 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/109 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, LOCKING, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA W-C-596/114 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, GROUNDING, LOCKING, 2 POLE, 3 WIRE, 15 AMPERES, 277 VOLTS, 50/60 HERTZ
DLA SMD-5962-95642 REV D-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3 VOLT OCTAL BUS TRANSCEIVER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA W-C-596/156 B-2012 CONNECTOR, CABLE OUTLET, ELECTRICAL, SPECIFIC PURPOSE, CABLE CONNECTING, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 120 VOLTS, 400 HERTZ, 3 PHASE
DLA W-C-596/17 E VALID NOTICE 2-2011 Connector, Plug, Electrical, General Purpose, Grounding, General Grade, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz
DLA W-C-596/41 E-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, HOSPITAL GRADE, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA W-C-596/116 B-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, SINGLE, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 125/250 VOLTS, 50/60 HERTZ
DLA W-C-596/155 B-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIFIC PURPOSE, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 120 VOLTS, 400 HERTZ, 3 PHASE
DLA W-C-596/41 F-2013 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, HOSPITAL GRADE, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 125 VOLTS, 50/60 HERTZ
DLA A-A-55812 VALID NOTICE 3-2013 Cable Assembly, (Type I), Electronic Test Equipment,(2 Poles, 3 Wires, 125 Volts, 13 Amperes, 50 or 60 Hertz), Grounding Plug Connector
DLA W-C-596/118 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 125/250 VOLTS, 50/60 HERTZ
DLA W-C-596/30 D VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, Cable Outlet, General Grade, 4 Pole, 4 Wire, 20 Amperes, 3 Phase WYE, 120/208 Volts, 50/60 Hertz
DLA MIL-DTL-24646/8 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, SUBMERSIBLE, (15 FEET), 125 VOLTS, ALTERNATING CURRENT, THREE PHASE BUSES, SINGLE PHASE BRANCHES, 0-30 AMPERE MIDGET FUSES SYMBOLS 646.1 AND 647.1
DLA MIL-DTL-2726/69 C VALID NOTICE 1-2013 Receptacle, Outlet, Triple, Electrical, Portable, 15-Ampere, 125-Volt Alternating Current, Double Pole, Grounded, 25-Foot Cable Extension (Symbol No. 779)
DLA SMD-5962-03248-2003 MICROCIRCUIT, DIGITAL-LINEAR, RADIATION HARDENED, 9 AMP NON-INVERTING 5 V LOGIC UVLO FET DRIVER, MONOLITHIC SILICON
DLA W-C-596/41 D VALID NOTICE 2-2011 Connector, Receptacle, Electrical, General Purpose, Single, Hospital Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/142 C VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/64 E-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, GENERAL GRADE, GROUNDING, 2 POLE, 3 WIRE, 20 AMPERES, 250 VOLTS, 50/60 HERTZ
DLA W-C-596/128 B-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, SINGLE, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 250 VOLTS, 50/60 HERTZ, 3-PHASE
DLA W-C-596/129 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, LOCKING, 3 POLE, 4 WIRE, 30 AMPERES, 250 VOLTS, 50/60 HERTZ, 3-PHASE
DLA W-C-596/167 B VALID NOTICE 2-2013 Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 250 Volts, 50/60 Hertz
DLA W-C-596/171 B VALID NOTICE 2-2013 Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz
DLA W-C-596/175 B VALID NOTICE 2-2013 Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 277 Volts, 50/60 Hertz
DLA W-C-596/29 C VALID NOTICE 1-2013 Connector, Plug, Electrical, General Purpose, General Grade, 4 Pole, 4 Wire, 20 Amperes, 3 Phase WYE, 120/208 Volts, 50/60 Hertz
DLA W-C-596/153 A VALID NOTICE 3-2011 Connector, Cable Outlet, Electrical, Specific Purpose, Single, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 120 Volts, 400 Hertz, 1 Phase
DLA W-C-596/122 B VALID NOTICE 2-2011 Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/130 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 250 VOLTS, 50/60 HERTZ, 3-PHASE
DLA W-C-596/8 D VALID NOTICE 1-2013 Connector, Plug, Electrical, Specific Purpose, Cable Outlet, General Grade, Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/21 C VALID NOTICE 3-2013 Connector, Plug, Electrical, Specific Purpose, Cable Outlet, Locking, General Grade,, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz
DLA W-C-596/126 C-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIAL PURPOSE, CABLE OUTLET, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 20 AMPERES, 125/250 VOLTS, 50/60 HERTZ, 3-PHASE
DLA W-C-596/137 A VALID NOTICE 1-2006 CONNECTORS, PLUG, ELECTRICAL, SPECIAL PURPOSE, GROUNDING, 4 POLE, 5 WIRE, 20 AMPERES, 120/208 VOLTS, 50/60 HERTZ, 3-PHASE, Y
DLA W-C-596/141 C VALID NOTICE 1-2006 CONNECTOR, RECEPTACLE, ELECTRICAL, MALE INLET, GENERAL PURPOSE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 250 VOLTS, 50/60 HERTZ
DLA W-C-596/124 A VALID NOTICE 2-2011 Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase
DLA W-C-596/154 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIFIC PURPOSE, SINGLE, LOCKING, GROUNDING, 3 POLE, 4 WIRE, 30 AMPERES, 120 VOLTS, 400 HERTZ, 3 PHASE
DLA W-C-596/151 C-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIFIC PURPOSE, SINGLE, GROUNDING, LOCKING, 2 POLE, 3 WIRE, 30 AMPERES, 120 VOLTS, 400 HERTZ, 1 PHASE
DLA W-C-596/158 B-2012 CONNECTOR, PLUG, ELECTRICAL, SPECIFIC PURPOSE, LOCKING, GROUNDING, 4 POLE, 5 WIRE, 30 AMPERES, 120/208 VOLTS, 3 PHASE Y, 400 HERTZ
DLA W-C-596/38 C VALID NOTICE 3-2013 Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 4 Pole, 4 Wire, 60 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz
DLA W-C-596/159 A VALID NOTICE 3-2011 Connector, Cable Outlet, Electrical, Special Purpose, Cable Connecting, Locking Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 3 Phase Y, 400 Hertz
DLA W-C-596/159 A VALID NOTICE 2-2006 Connector, Cable Outlet, Electrical, Special Purpose, Cable Connecting, Locking Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 3 Phase Y, 400 Hertz
DLA MIL-DTL-24646/7 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, SUBMERSIBLE (15 FEET), 125 VOLTS, ALTERNATING CURRENT, SINGLE PHASE BUSES, 0-30 AMPERE MIDGET FUSES, SYMBOLS 635.1, 653.1 AND 654.1
DLA SMD-5962-96748 REV E-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT OCTAL BUS TRANSCEIVER AND REGISTER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96811 REV B-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT SCAN TEST DEVICE WITH 18- BIT UNIVERSAL BUS TRANSCEIVER, WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA W-C-596/132 A VALID NOTICE 1-2006 Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 4 Pole, % Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3 Phase, Y
DLA MIL-DTL-24646/4 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 450 VOLTS, ALTERNATING CURRENT, THREE PHASE BUSES, SINGLE AND THREE PHASE BRANCHES, 0-30 AND 31-60 AMPERE FUSES, SYMBOLS 543, 544, 545, 546 AND 547
DLA MIL-DTL-24646/10 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, SUBMERSIBLE, (15 FEET), 250 VOLTS, ALTERNATING CURRENT, THREE PHASE BUSES, SINGLE AND THREE PHASE BRANCHES, 0-30 AMPERE FUSES, SYMBOLS 560.1, 561.1, 562.1, AND 563.1
DLA W-C-596/212 A VALID NOTICE 2-2011 Connector, Receptacle, Electrical, General Purpose, Duplex, Grounding, Hospital Grade, Ground Fault Circuit Interrupting, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 60 Hertz
DLA W-C-596/134 B VALID NOTICE 2-2011 Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y
DLA W-C-596/138 C VALID NOTICE 2-2011 Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y
DLA MIL-DTL-24646/1 B-2008 FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125 VOLTS, ALTERNATING CURRENT, SINGLE AND THREE PHASE BUSES, SINGLE PHASE BRANCHES, 0-30 AMPERE MIDGET FUSES, SYMBOLS 600, 601, 612, 612.1, 613, 613.1 AND 614
DLA W-C-596/136 A VALID NOTICE 2-2011 Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y
DLA W-C-596/157 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIFIC PURPOSE, SINGLE, LOCKING, GROUNDING, 4 POLE, 5 WIRE, 30 AMPERES, 120/208 VOLTS, 3 PHASE Y, 400 HERTZ
DLA W-C-596/46 C VALID NOTICE 2-2013 Connector, Receptacle, Electrical, Specific Purpose, Single, General Grade, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz
DLA W-C-596/102 C VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
DLA W-C-596/110 B VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz
DLA W-C-596/115 C VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking Grounding, 2 Pole, 3 Wire, 15 Amperes, 277 Volts, 50/60 Hertz
DLA W-C-596/131 B VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, General Purpose, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase
DLA W-C-596/145 A VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Special Purpose, Duplex, Hospital Grade, Isolated Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
DLA SMD-5962-96748 REV D-1999 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT OCTAL BUS TRANSCEIVER AND REGISTER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96780 REV B-2003 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, 3.3-V 16-BIT BUS TRANSCEIVER WITH EQUIVALENT 22 OHM A-PORT OUTPUT RESISTORS, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA MIL-DTL-24646/14 B-2008 FUSE BOXES, FEEDER JUNCTION, TOTALLY ENCLOSED, 250 VOLTS, ALTERNATING CURRENT, THREE PHASE BUSES, SINGLE AND THREE PHASE BRANCHES, 0-30 AND 31-60 AMPERE FUSES, SYMBOLS 680 AND 681.1
DLA W-C-596/119 B VALID NOTICE 2-2011 Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz
DLA MIL-C-28777/1 C VALID NOTICE 2-2009 Cable Assembly, (Type I), Electronic Test Equipment, (2 Poles, 3 Wires, 125 Volts, 13 Amperes, 50/60 Hertz), Grounding Plug Connector and Mil-C-5015 Connector with Cable Clamp

International Electrotechnical Commission (IEC), Capacitance Voltammetry Curve

IEC TR 63091:2017 Study for the derating curve of surface mount fixed resistors - Derating curves based on terminal part temperature
IEC 60745-2-11:2006 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60601-2-15:1988 Medical electrical equipment; part 2: particular requirements for the safety of capacitor discharge X-ray generators
IEC 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:1984 Safety of hand-held motor-operated electric tools. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2003/AMD1:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws); Amendment 1

IECQ - IEC: Quality Assessment System for Electronic Components, Capacitance Voltammetry Curve

QC 301901/US 0004 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 1B Rated Voltages: 50 Volts & 100 Volts
QC 301901/US 0003 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 2R1 and 2X1 Rated Voltages: 50 Volts & 100 Volts

RU-GOST R, Capacitance Voltammetry Curve

GOST 12661-1967 Capacitors and resistors. Mounting lengths and diameters of wire leads
GOST R 50044-2009 Electronic components for surface mounting at electronic radio equipment. Constructional compatibility requirements
GOST R 50044-1992 Integrated microcircuits and semiconductor device service mounted technology. Requirements to packages
GOST R 50636-1994 Electric hand-held tools. Particular safety requirements and methods of testing jig and sabre saws
GOST R 50267.15-1993 Medical electrical equipment. Part 2. Particular requirements for the safaty of capasitor discharge X- ray generators
GOST IEC 60745-2-11-2014 Hand-held motor-operated electric tools. Safety. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
GOST 30324.15-1995 Medical electrical equiment. Part 2. Particular requirements for the safety of capacitor discharge X- ray generators

SE-SIS, Capacitance Voltammetry Curve

SIS SS 436 02 95-1980 Overhead line crossings — Pole mounted transformer in high-voltage overheadline, max 22 kV
SIS SS 436 02 62-1990 Overhead line crossings — High voltage overhead line, max 52 kV, above public road — Crossing sp?n safe for falling trees
SIS SS-IEC 601-2-15:1991 Medical electrical equipment - Particular requirements for the safety ofcapacitor discharge X-ray generators
SIS SS 436 02 63-1990 Overhead line crossings — High voltage overhead line for max 52 kVabove railway — Crossing span safe for falling trees
SIS SS 436 02 52-1980 Overhead line crossings — High voltage overhead line, max. 45 k V, above public road — Reinforced construction — Crossing span safe for falling trees
SIS SS 431 04 66-1989 Safety of capacitors for use in tubular fluorescent and other discharge lamp circuits — General requirements and tests
SIS SS 436 02 53-1980 Overhead Ii ne crossings — High voltage overhead line, max. 45 kV, above railway — Reinforced construction — Crossing span safe for faIIing trees

Professional Standard - Nuclear Industry, Capacitance Voltammetry Curve

EJ/T 918-1994 Guidelines for the formulation of pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

国家能源局, Capacitance Voltammetry Curve

NB/T 20439-2017 Guidelines for developing pressure-temperature limit curves for reactor pressure vessels in pressurized water reactor nuclear power plants

Indonesia Standards, Capacitance Voltammetry Curve

SNI 16-6638-2002 Therapeutic X-ray equipment operating in the range 10 kV to 1 MV - Safety requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Capacitance Voltammetry Curve

GB/Z 30556.2-2017 Electromagnetic compatibility—Installation and mitigation guidelines—Earthing and cabling
GB 3883.11-2012 Safety of hand-held motor-operated electric tools.Part 2:Particular requirements for reciprocating saws(jig and sabre saws)
GB/T 3883.11-2012 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws)
GB 3883.11-2005 Safety of hand-held motor-operated electric tools-Part 2:Particular requirements for reciprocating saws(Jig and Sabre Saws)
GB/T 18489-2008 Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
GB 18489-2008 Capacitors for use in tubular fluorescent and other discharge lamp circuits.General and safety requirements
GB 18489-2001 Capacitors for use in tubular fluorescent and other discharge lamp circuits general and safety requirements
GB 3883.11-1991 Safety of hand-held motor-operated electric tools--Part 11: Particular requirements for electric reciprocating saws (jig and sabre saws)

Korean Agency for Technology and Standards (KATS), Capacitance Voltammetry Curve

KS A IEC 60532-2016(2021) Radiation protection instrumentation－Installed dose ratemeters, warning assemblies and monitors－X and gamma radiation of energy between 50 keV and 7 MeV
KS C IEC 60745-2-11:2007 Hand－held motor－operated electric tools－Safety－Part 2－11：Particular requirements for reciprocating saws(jig and sabre saws)
KS C IEC 61000-5-2-2014(2019) Electromagnetic compatibility(EMC) — Part 5: Installation and mitigation guidelines — Section 2: Earthing and cabling
KS C IEC 61000-5-2:2014 Electromagnetic compatibility(EMC) — Part 5: Installation and mitigation guidelines — Section 2: Earthing and cabling

US-CFR-file, Capacitance Voltammetry Curve

CFR 29-1926.1409-2014 Labor. Part1926:Safety and health regulations for construction. Section1926.1409:Power line safety (over 350 kV).
CFR 29-1926.1408-2014 Labor. Part1926:Safety and health regulations for construction. Section1926.1408:Power line safety (up to 350 kV)—equipment operations.
CFR 29-1926.1407-2014 Labor. Part1926:Safety and health regulations for construction. Section1926.1407:Power line safety (up to 350 kV)—assembly and disassembly.

未注明发布机构, Capacitance Voltammetry Curve

BS EN 50144-2-10:2001 Safety of hand - held electric motor operated tools — Part 2 - 10 : Particular requirements for jig saws

CZ-CSN, Capacitance Voltammetry Curve

CSN 35 1122-2-3-1999 Three-phase oil-immersed distribution transformers 50 Hz,from 50 to 2 500 kVA with highest voltage for equipment not exceeding 36 kV-Part 2:Distribution transformers with cable boxes on the high-voltage and/or low-voltage side-Section 3 Cable boxes type 2

British Standards Institution (BSI), Capacitance Voltammetry Curve

BS EN 60745-2-11+A1:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
BS EN 60745-2-11:2010 Hand-held motor-operated electric tools. Safety. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
BS 5724-2.15:1989 Medical electrical equipment. Particular requirements for safety. Specification for capacitor discharge X-ray generators
BS EN 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)

Standard Association of Australia （SAA）, Capacitance Voltammetry Curve

AS/NZS 60745.2.11:2009

ICEA - Insulated Cable Engineers Association Inc., Capacitance Voltammetry Curve

S-81-570-2005-2005 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors
S-81-570-2001-2002 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors
S-81-570-1996-1997 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors (Supersedes ICEA P-81-570)

IN-BIS, Capacitance Voltammetry Curve

IS 9859 Pt.3-1983

NEMA - National Electrical Manufacturers Association, Capacitance Voltammetry Curve

NEMA BU 1.1-1981 INSTRUCTIONS FOR SAFE HANDLING@ INSTALLATION@ OPERATION AND MAINTENANCE OF BUSWAY AND ASSOCIATED FITTINGS RATED 600 VOLTS OR LESS
NEMA BU 1.1-1996 General Instructions for Handling@ Installation@ Operation and Maintenance of Busway Rated 600 Volts or Less
NEMA BU 1.1-2010 General Instructions for Handling@ Installation@ Operation@ and Maintenance of Busway Rated 600 Volts or Less
NEMA BU 1.1-1986 INSTRUCTIONS FOR HANDLING@ INSTALLATION@ OPERATION AND MAINTENANCE OF BUSWAY RATED 600 VOLTS OR LESS
NEMA BU 1.1-1991 GENERAL INSTRUCTIONS FOR PROPER HANDLING@ INSTALLATION@ OPERATION@ AND MAINTERNANCE OF BUSWAY RATED 600 VOLTS OR LESS

National Electrical Manufacturers Association（NEMA), Capacitance Voltammetry Curve

NEMA BU 1.1-2000 General Instructions for Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less

Taiwan Provincial Standard of the People's Republic of China, Capacitance Voltammetry Curve

CNS 14905-11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)
CNS 14905.11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)

Association Francaise de Normalisation, Capacitance Voltammetry Curve

NF C61-307:1992 Electrical accessories for domestic and similar purposes. Round non-wirable two-pole plugs, 2,5 A - 250 volts, with cord, for the connection of class II equipment for household and similar purposes.
NF C74-113:1991 Medical electrical equipment. Part 2 : particular requirements for the safety of capacitor discharge X-ray generators.
UTE C91-005-2U*UTE C91-005-2:1998 Electromagnetic compatibility (EMC). Part 5 : installation and mitigation guidelines. Section 2 : earthing and cabling.
UTE C91-005-2:1998 Compatibilité électromagnétique (CEM) - Partie 5 : guides d'installation et d'atténuation - Section 2 : mise à la terre et câblage.
NF Z84-566:2014 Electromagnetic compatibility and Radio spectrum matters (ERM) - Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft (V1.1.1)

European Committee for Electrotechnical Standardization（CENELEC）, Capacitance Voltammetry Curve

HD 395.2.15 S1-1989 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Capacitor Discharge X- Ray Generators
EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

Professional Standard - Post and Telecommunication, Capacitance Voltammetry Curve

YD/T 2191.2-2010 Electromagnetic compatibility in telecommunication:installation and mitigation guidelines.Part 2:Earthing and cabing

German Institute for Standardization, Capacitance Voltammetry Curve

DIN EN 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, modified); German version EN 60745-2-11:2003 + A11:2007
DIN EN 301843-2:2018 ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard for electromagnetic compatibility - Part 2: Specific conditions for VHF radiotelephone transmitters and receivers (Endorsement of the English versio
DIN 50439:1982 Testing of materials for semiconductor technology; determination of the dopant concentration profile of single crystalline semiconductor material by means of the capacitancevoltage method and mercury contact
DIN EN 301466:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft (Endorsement of the English version EN 301466 V 1.1.1 (
DIN EN 319162-1:2016 Electronic Signatures and Infrastructures (ESI) - Associated Signature Containers (ASiC) - Part 1: Building blocks and ASiC baseline containers (Endorsement of the English version EN 319 162-1 V1.1.1 (2016-04) as German standard)

Conference of European Post Telecommunication (CEPT), Capacitance Voltammetry Curve

CEPT/ERC/REC 14-03 E-1996 Harmonised Radio Frequency Channel Arrangements for Low and Medium Capacity Systems in the Band 3400 MHz to 3600 MHz
CEPT/ERC/REC 14-01 E-1995 Radio-Frequency Channel Arrangements for High Capacity Analogue and Digital Radio-Relay Systems Operating in the Band 5925 MHz - 6425 MHz
CEPT/ERC/REC 14-02 E-1995 Radio-Frequency Channel Arrangements for Medium and High Capacity Analogue or High Capacity Digital Radio-Relay Systems Operating in the Band 6425 MHz - 7125 MHz

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Capacitance Voltammetry Curve

ITU-R M.631-1986 Use of Hyperbolic Maritime Radionavigation Systems in the Band 283.5-315 kHz - Section 8D - Radiodetermination@ Global Maritime Distress and Safety System and Related Subjects
ITU-R F.497-3-1990 Radio-Frequency Channel Arrangements for Low and Medium Capacity Analogue or Medium and High Capacity Digital Radio- Relay Systems Operating in the 13 GHz Band - Section 9B1 - Radio- Frequency Channel Arrangements

International Telecommunication Union (ITU), Capacitance Voltammetry Curve

ITU-R M.631-1-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz

Danish Standards Foundation, Capacitance Voltammetry Curve

DS/EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
DS/IEC/TR 61000-5-2:1998 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
DS/EN 301466 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft

AENOR, Capacitance Voltammetry Curve

UNE-EN 60745-2-11:2011 Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
UNE 21000-5-2:2003 IN Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling.

Japanese Industrial Standards Committee (JISC), Capacitance Voltammetry Curve

JIS C 5101-14-2:2009 Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Safety tests only

BE-NBN, Capacitance Voltammetry Curve

NBN-HD 395.2.15-1994 Medical electrical equipment. Part 2: Particular requirements for the safety of capacitor discharge X-ray generators

ZA-SANS, Capacitance Voltammetry Curve

SANS 61000-5-2:1997 Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 2: Earthing and cabling

Lithuanian Standards Office , Capacitance Voltammetry Curve

LST EN 301 466 V1.1.1-2007 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft

ETSI - European Telecommunications Standards Institute, Capacitance Voltammetry Curve

ETSI EN 301 466:1999 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Technical Characteristics and Methods of Measurement for Two-Way VHF Radiotelephone Apparatus for Fixed Installation in Survival Craft (V1.1.1)
ETSI EN 301 466:2000 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Technical Characteristics and Methods of Measurement for Two-Way VHF Radiotelephone Apparatus for Fixed Installation in Survival Craft (V1.1.1)