ZH

RU

ES

Volt-ampere curve of capacitor

Volt-ampere curve of capacitor, Total:122 items.

In the international standard classification, Volt-ampere curve of capacitor involves: Transformers. Reactors, Resistors, Capacitors, Radiation protection, Hand-held tools, Electrical accessories, Medical equipment, Electromagnetic compatibility (EMC), Radiocommunications, Semiconducting materials, Telecommunication terminal equipment, Shipbuilding and marine structures in general, Small craft, Protection against fire, Materials for aerospace construction, Space systems and operations, Installations in buildings, Semiconductor devices, Applications of information technology.


AT-ON, Volt-ampere curve of capacitor

  • ONORM E 6022-1990 Low-voltage high-rupturing-capacity fuses; three-pole fuse base racks for L. V.H.R.C.-fuses up to 660 V for busbar mounting
  • ONORM E 6021-1989 Low-voltage high-rupturing-capacity fuses up to 660 V; LV HRC fuse bases

Underwriters Laboratories (UL), Volt-ampere curve of capacitor

  • UL 4703-2014 UL Standard for safety Photovoltaic Wire (First Edition)
  • UL 1414-2000 UL Standard for Safety Capacitors and Suppressors for Radio-and Television-Type Appliances (Sixth Edition)
  • UL SUBJECT 1712-2006 Outline of Investigation for Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System Issue Number: 4
  • UL 60384-14-2009 Safety requirements for fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
  • UL 486C CRD-2016 UL Standard for Safety Splicing Wire Connectors - Section / Paragraph Reference: 1.5@ 10.4@ 10.5@ Table 2@ Table 22 Subject: Increase Voltage Ratings to 2000 Volts (Edition 6: January 11@ 2013)
  • UL 982 CRD-2009 UL Standard for Safety Motor-Operated Household Food Preparing Machines - Section / Paragraph Reference: 13 Subject: Flexing of Internal Wiring (Edition 6: June 19@ 2009)

U.S. Military Regulations and Norms, Volt-ampere curve of capacitor

American National Standards Institute (ANSI), Volt-ampere curve of capacitor

  • ANSI C57.12.50-1981 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982
  • ANSI C57.12.52-1981 Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
  • ANSI C57.12.51-1981 Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated
  • ANSI C57.12.21-1992 American National Standard Requirements for Pad-Mounted, Compartmental - Type Self - Cooled, Single - Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low - Voltage, 240/120 Volts; 167 kVA and Sma
  • ANSI C57.12.25-1990 Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distri- bution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low-Voltage, 240/ 120 Volts; 167 kVA and Smaller - Re
  • ANSI C57.12.22-1993 American National Standard for Transformers—Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution TransformersWith High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Voltsand Below; Low Voltage, 480 Volts and Be
  • ANSI N43.3-2008 General Radiation Safety - Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies Up to 10 MeV
  • ANSI N43.3-1993 American National Standard for General radiation safety - Installations using Non-Medical X-ray and Sealed Gamma-Ray Sources, Energies Up To 10 MeV

RO-ASRO, Volt-ampere curve of capacitor

  • STAS 3184/4-1988 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR ELECTRIC WIRINGS UP TO 380 V AI.TERNATING CURRENT AND 250 V DIRECT CURRENT AND UI' TO 25A Check-up gauges for plugs amlsocket- outlets up to 380 V and 16 A
  • STAS 3184/1-1985 PLUGS, SOCKET-OUTLETS ANO GOUPLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNA- TING CURRENT, AND 250 V DIRECT GURRENT AND UP TO 25 A General reqttirements
  • STAS 3184/3-1985 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR ELECTRIC WI- RINGSUP TO 380 V ALTERNA- TING CURRENT, AND 250 V DI- RECT CURRENT AND UP TO 25 A Shapes and dimensions
  • STAS 3184/2-1985 PLUGS, SOCKET-OUTLETS'AND COU- PLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNAT1NG CURRENT, AND 250 V DIRECT CURRENT AND UP TO 25 A Rules and test methods
  • STAS 382-1972 Overhead electrical lines up to 1 kV SUPPORTING AND TRAGTION HORIZONTAL BRACKETS AND AUXILIARY MOUNTING PARTS
  • STAS 6048/7-1980 Radio interferences ELECTRIC.AL APPARATUS, MACHINES AND INSTALLATIONS Permissible limits of interferences and special conditions for test

SE-SIS, Volt-ampere curve of capacitor

  • SIS SS 436 02 95-1980 Overhead line crossings — Pole mounted transformer in high-voltage overheadline, max 22 kV
  • SIS SS 436 02 62-1990 Overhead line crossings — High voltage overhead line, max 52 kV, above public road — Crossing sp?n safe for falling trees
  • SIS SS 436 02 63-1990 Overhead line crossings — High voltage overhead line for max 52 kVabove railway — Crossing span safe for falling trees
  • SIS SS 436 02 52-1980 Overhead line crossings — High voltage overhead line, max. 45 k V, above public road — Reinforced construction — Crossing span safe for falling trees
  • SIS SS 431 04 66-1989 Safety of capacitors for use in tubular fluorescent and other discharge lamp circuits — General requirements and tests
  • SIS SS 436 02 53-1980 Overhead Ii ne crossings — High voltage overhead line, max. 45 kV, above railway — Reinforced construction — Crossing span safe for faIIing trees

RU-GOST R, Volt-ampere curve of capacitor

  • GOST 12661-1967 Capacitors and resistors. Mounting lengths and diameters of wire leads
  • GOST R 50636-1994 Electric hand-held tools. Particular safety requirements and methods of testing jig and sabre saws
  • GOST R 50267.15-1993 Medical electrical equipment. Part 2. Particular requirements for the safaty of capasitor discharge X- ray generators
  • GOST IEC 60745-2-11-2014 Hand-held motor-operated electric tools. Safety. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
  • GOST 30324.15-1995 Medical electrical equiment. Part 2. Particular requirements for the safety of capacitor discharge X- ray generators
  • GOST IEC 60745-2-11-2011 Hand-held motor-operated electric tools. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jig and saber saws)
  • GOST R ISO 14624-2-2010 Space systems. Safety and compatibility of materials. Part 2. Determination of flammability of electrical-wire insulation and accessory materials

International Electrotechnical Commission (IEC), Volt-ampere curve of capacitor

  • IEC TR 63091:2017 Study for the derating curve of surface mount fixed resistors - Derating curves based on terminal part temperature
  • IEC 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • IEC 60745-2-11:1984 Safety of hand-held motor-operated electric tools. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • IEC 60745-2-11:2006 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • IEC 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • IEC 60745-2-11:2003/AMD1:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws); Amendment 1
  • IEC 60364-5-523:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems

IECQ - IEC: Quality Assessment System for Electronic Components, Volt-ampere curve of capacitor

  • QC 301901/US 0004 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 1B Rated Voltages: 50 Volts & 100 Volts
  • QC 301901/US 0003 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 2R1 and 2X1 Rated Voltages: 50 Volts & 100 Volts

Korean Agency for Technology and Standards (KATS), Volt-ampere curve of capacitor

  • KS A IEC 60532-2016(2021) Radiation protection instrumentation-Installed dose ratemeters, warning assemblies and monitors-X and gamma radiation of energy between 50 keV and 7 MeV
  • KS C IEC 60745-2-11:2007 Hand-held motor-operated electric tools-Safety-Part 2-11:Particular requirements for reciprocating saws(jig and sabre saws)

未注明发布机构, Volt-ampere curve of capacitor

  • BS EN 50144-2-10:2001 Safety of hand - held electric motor operated tools — Part 2 - 10 : Particular requirements for jig saws

ICEA - Insulated Cable Engineers Association Inc., Volt-ampere curve of capacitor

  • S-81-570-2005-2005 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors
  • S-81-570-2001-2002 Standard for 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors
  • S-81-570-1996-1997 600 Volt Rated Cables of Ruggedized Design for Direct Burial Installations as Single Conductors or Assemblies of Single Conductors (Supersedes ICEA P-81-570)

British Standards Institution (BSI), Volt-ampere curve of capacitor

  • BS EN 60745-2-11+A1:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
  • BS EN 60745-2-11:2010 Hand-held motor-operated electric tools. Safety. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • BS 5724-2.15:1989 Medical electrical equipment. Particular requirements for safety. Specification for capacitor discharge X-ray generators
  • BS EN 60745-2-11:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws)
  • BS ISO 14624-2:2004 Space systems - Safety and compatibility of materials - Determination of flammability of electrical-wire insulation and accessory materials
  • BS ISO 14624-2:2003 Space systems. Safety and compatibility of materials. Determination of flammability of electrical-wire insulation and accessory materials
  • BS ISO 14624-2:2023 Space systems. Safety and compatibility of materials - Determination of flammability of electrical-wire insulation and accessory materials
  • BS 5724 Sec.2.15:1989 Medical electrical equipment. Particular requirements for safety. Specification for capacitor discharge X-ray generators

Standard Association of Australia (SAA), Volt-ampere curve of capacitor

Defense Logistics Agency, Volt-ampere curve of capacitor

  • DLA DESC-DWG-85031 REV A-1994 CONNECTOR, RECEPTACLE, ELECTRICAL, GENERAL PURPOSE, SINGLE, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERE, 125 VOLTS, ENVIRONMENTAL
  • DLA SMD-5962-95642 REV D-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3 VOLT OCTAL BUS TRANSCEIVER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
  • DLA SMD-5962-96748 REV E-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT OCTAL BUS TRANSCEIVER AND REGISTER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
  • DLA SMD-5962-96748 REV D-1999 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT OCTAL BUS TRANSCEIVER AND REGISTER WITH BUS HOLD, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
  • DLA MIL-C-28777/1 C VALID NOTICE 2-2009 Cable Assembly, (Type I), Electronic Test Equipment, (2 Poles, 3 Wires, 125 Volts, 13 Amperes, 50/60 Hertz), Grounding Plug Connector and Mil-C-5015 Connector with Cable Clamp
  • DLA SMD-5962-96810 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-VOLT 16-BIT TRANSPARENT D-TYPE LATCH WITH BUS HOLD, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
  • DLA SMD-5962-95647 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED BICMOS, 3.3 V 16-BIT EDGE-TRIGGERED D-TYPE FLIPFLOPS WITH BUS HOLD, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
  • DLA MIL-PRF-31032/4 A (3)-2008 PRINTED WIRING BOARD, RIGID FLEX OR FLEXIBLE, MULTILAYER, WITH PLATED朤HROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING
  • DLA SMD-5962-97638 REV C-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3 VOLT 16-BIT TRANSPARENT D-TYPE LATCH WITH BUS HOLD, EQUIVALENT 22 OHM SERIES OUTPUT RESISTORS, THREE-STATE OUTPUTS, AND TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

NEMA - National Electrical Manufacturers Association, Volt-ampere curve of capacitor

  • NEMA BU 1.1-1981 INSTRUCTIONS FOR SAFE HANDLING@ INSTALLATION@ OPERATION AND MAINTENANCE OF BUSWAY AND ASSOCIATED FITTINGS RATED 600 VOLTS OR LESS
  • NEMA BU 1.1-1996 General Instructions for Handling@ Installation@ Operation and Maintenance of Busway Rated 600 Volts or Less
  • NEMA BU 1.1-2010 General Instructions for Handling@ Installation@ Operation@ and Maintenance of Busway Rated 600 Volts or Less
  • NEMA BU 1.1-1986 INSTRUCTIONS FOR HANDLING@ INSTALLATION@ OPERATION AND MAINTENANCE OF BUSWAY RATED 600 VOLTS OR LESS
  • NEMA BU 1.1-1991 GENERAL INSTRUCTIONS FOR PROPER HANDLING@ INSTALLATION@ OPERATION@ AND MAINTERNANCE OF BUSWAY RATED 600 VOLTS OR LESS

National Electrical Manufacturers Association(NEMA), Volt-ampere curve of capacitor

  • NEMA BU 1.1-2000 General Instructions for Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less

CZ-CSN, Volt-ampere curve of capacitor

  • CSN 35 1122-2-3-1999 Three-phase oil-immersed distribution transformers 50 Hz,from 50 to 2 500 kVA with highest voltage for equipment not exceeding 36 kV-Part 2:Distribution transformers with cable boxes on the high-voltage and/or low-voltage side-Section 3 Cable boxes type 2

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Volt-ampere curve of capacitor

  • GB 3883.11-2012 Safety of hand-held motor-operated electric tools.Part 2:Particular requirements for reciprocating saws(jig and sabre saws)
  • GB/T 3883.11-2012 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws)
  • GB 3883.11-2005 Safety of hand-held motor-operated electric tools-Part 2:Particular requirements for reciprocating saws(Jig and Sabre Saws)
  • GB 3883.11-1991 Safety of hand-held motor-operated electric tools--Part 11: Particular requirements for electric reciprocating saws (jig and sabre saws)

Taiwan Provincial Standard of the People's Republic of China, Volt-ampere curve of capacitor

  • CNS 14905-11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)
  • CNS 14905.11-2005 Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)

Professional Standard - Post and Telecommunication, Volt-ampere curve of capacitor

  • YD/T 2191.2-2010 Electromagnetic compatibility in telecommunication:installation and mitigation guidelines.Part 2:Earthing and cabing

European Committee for Electrotechnical Standardization(CENELEC), Volt-ampere curve of capacitor

  • HD 395.2.15 S1-1989 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Capacitor Discharge X- Ray Generators
  • EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • HD 384.5.523-1991 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: Wiring Systems Section 523 - Current-Carrying Capacities

Association Francaise de Normalisation, Volt-ampere curve of capacitor

  • NF C61-307:1992 Electrical accessories for domestic and similar purposes. Round non-wirable two-pole plugs, 2,5 A - 250 volts, with cord, for the connection of class II equipment for household and similar purposes.
  • NF C74-113:1991 Medical electrical equipment. Part 2 : particular requirements for the safety of capacitor discharge X-ray generators.
  • NF Z84-566:2014 Electromagnetic compatibility and Radio spectrum matters (ERM) - Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft (V1.1.1)

German Institute for Standardization, Volt-ampere curve of capacitor

  • DIN EN 60745-2-11:2008 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, modified); German version EN 60745-2-11:2003 + A11:2007
  • DIN EN 301843-2:2018 ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard for electromagnetic compatibility - Part 2: Specific conditions for VHF radiotelephone transmitters and receivers (Endorsement of the English versio
  • DIN 50439:1982 Testing of materials for semiconductor technology; determination of the dopant concentration profile of single crystalline semiconductor material by means of the capacitancevoltage method and mercury contact
  • DIN EN 301466:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft (Endorsement of the English version EN 301466 V 1.1.1 (
  • DIN EN 319162-1:2016 Electronic Signatures and Infrastructures (ESI) - Associated Signature Containers (ASiC) - Part 1: Building blocks and ASiC baseline containers (Endorsement of the English version EN 319 162-1 V1.1.1 (2016-04) as German standard)
  • DIN VDE 0100-520 Bb.1:2016 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems; Supplement 1: Explanation for application of the normative requirements of DIN VDE 0100-520 (VDE 0100-520):2013-06

BE-NBN, Volt-ampere curve of capacitor

  • NBN-HD 395.2.15-1994 Medical electrical equipment. Part 2: Particular requirements for the safety of capacitor discharge X-ray generators
  • NBN-EN 60931-1-1994 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V Part 1 : General - Performance, testing and rating Safety requirements - Guide for installation and operation

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Volt-ampere curve of capacitor

  • ITU-R F.497-3-1990 Radio-Frequency Channel Arrangements for Low and Medium Capacity Analogue or Medium and High Capacity Digital Radio- Relay Systems Operating in the 13 GHz Band - Section 9B1 - Radio- Frequency Channel Arrangements
  • ITU-R F.382-5-1990 Radio-Frequency Channel Arrangements for Medium and High Capacity Analogue Radio-Relay Systems Operating in the 2 and 4 GHz Bands@ or for Medium and High Capacity Digital Radio-Relay Systems Operating in the 4 GHz Band - Section 9B1 - Radio-Frequency Chan
  • ITU-R F.383-4-1990 Radio-Frequency Channel Arrangements@ for High Capacity Analogue or Digital Radio-Relay Systems Operating in the Lower 6 GHz Band - Section 9B1 - Radio-Frequency Channel Arrangements

Danish Standards Foundation, Volt-ampere curve of capacitor

  • DS/EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
  • DS/EN 301466 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft

AENOR, Volt-ampere curve of capacitor

  • UNE-EN 60745-2-11:2011 Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

International Telecommunication Union (ITU), Volt-ampere curve of capacitor

  • ITU-R M.631-1-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz

Conference of European Post Telecommunication (CEPT), Volt-ampere curve of capacitor

  • CEPT/ERC/REC 14-01 E-1995 Radio-Frequency Channel Arrangements for High Capacity Analogue and Digital Radio-Relay Systems Operating in the Band 5925 MHz - 6425 MHz
  • CEPT/ERC/REC 14-02 E-1995 Radio-Frequency Channel Arrangements for Medium and High Capacity Analogue or High Capacity Digital Radio-Relay Systems Operating in the Band 6425 MHz - 7125 MHz
  • CEPT/ERC/REC 14-01 E-1996 Radio-Frequency Channel Arrangements for High Capacity Analogue and Digital Radio-Relay Systems Operating in the Band 5925 MHz - 6425 MHz (Bonn 1995)
  • CEPT/ERC/REC 14-02 E-1996 Radio-Frequency Channel Arrangements for Medium and High Capacity Analogue or High Capacity Digital Radio-Relay Systems Operating in the Band 6425 MHz - 7125 MHz (Bonn 1995)

Lithuanian Standards Office , Volt-ampere curve of capacitor

  • LST EN 301 466 V1.1.1-2007 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);Technical characteristics and methods of measurement for two-way VHF radiotelephone apparatus for fixed installation in survival craft
  • LST EN 60745-2-11-2010 Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, modified + A1:2008)

ETSI - European Telecommunications Standards Institute, Volt-ampere curve of capacitor

  • ETSI EN 301 466:1999 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Technical Characteristics and Methods of Measurement for Two-Way VHF Radiotelephone Apparatus for Fixed Installation in Survival Craft (V1.1.1)
  • ETSI EN 301 466:2000 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Technical Characteristics and Methods of Measurement for Two-Way VHF Radiotelephone Apparatus for Fixed Installation in Survival Craft (V1.1.1)
  • TR 101 983-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radio Equipment to Be Used in the 76 GHz to 77 GHz Band; System Reference Document for Short-Range Radar to Be Fitted on Road Infrastructure (V1.1.1)

Japanese Industrial Standards Committee (JISC), Volt-ampere curve of capacitor

  • JIS C 0364-5-523:1999 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 52: Wiring systems Section 523: Current-carrying capacities

European Telecommunications Standards Institute (ETSI), Volt-ampere curve of capacitor

  • ETSI EN 301 466-2000 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Technical Characteristics and Methods of Measurement for Two-Way VHF Radiotelephone Apparatus for Fixed Installation in Survival Craft (V1.1.1)

Canadian Standards Association (CSA), Volt-ampere curve of capacitor

  • CAN/CSA-C22.2 NO.60745-2-11A-2009 Amendment 1: Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (Second Edition)

International Organization for Standardization (ISO), Volt-ampere curve of capacitor

  • ISO 14624-2:2003 Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials
  • ISO 14624-2:2023 Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
  • ISO/FDIS 14624-2 Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials
  • ISO/DIS 14624-2 Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved