ZH
RU
ES

Method of Particle Size Detection

Method of Particle Size Detection, Total:500 items.

In the international standard classification, Method of Particle Size Detection involves: Animal feeding stuffs, Spices and condiments. Food additives, Particle size analysis. Sieving, Analytical chemistry, Products of the chemical industry, Production of metals, Testing of metals, Road engineering, Plastics, Cutting tools, Environmental protection, Sugar. Sugar products. Starch, Linear and angular measurements, Rubber, Ceramics, Raw materials for rubber and plastics, Products of non-ferrous metals, Soil quality. Pedology, Non-destructive testing, Insulating fluids, Shipbuilding and marine structures in general, Construction materials, Air quality, Ferroalloys, Valves, Earthworks. Excavations. Foundation construction. Underground works, Textile machinery, Ferrous metals, Fuels, Clothes, Farming and forestry, Paper production processes, Paints and varnishes, Products of the textile industry, Fertilizers, Pesticides and other agrochemicals, Cork and cork products, Electricity. Magnetism. Electrical and magnetic measurements, TESTING, Internal combustion engines, Rubber and plastics products, Non-metalliferous minerals, Electrical wires and cables, Materials for the reinforcement of composites, Components and accessories for telecommunications equipment, Waxes, bituminous materials and other petroleum products, Cereals, pulses and derived products, Semiconducting materials, Iron and steel products, Photography, Semi-manufactures of timber, Water quality, Physics. Chemistry, Protective equipment, Fluid power systems, Domestic, commercial and industrial heating appliances, Machine tools, Powder metallurgy, Textile fibres, Optics and optical measurements, Agricultural machines, implements and equipment, Protection of and in buildings, Materials for aerospace construction, Paint ingredients, Bearings, General methods of tests and analysis for food products, Vocabularies, Aids for disabled or handicapped persons, Coals, Astronomy. Geodesy. Geography, Measurement of fluid flow, Mechanical testing, Biology. Botany. Zoology, Refractories, Metalliferous minerals, Microbiology, Edible oils and fats. Oilseeds, Structures of buildings, Non-ferrous metals, Radiation measurements, Inorganic chemicals, Fibre optic communications, Protection against fire, Inks. Printing inks, Road vehicle systems, Tea. Coffee. Cocoa.

RU-GOST R, Method of Particle Size Detection

GOST 26573.3-2014 Premixes. Method for determination of particle size
GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 12579-2013 Sugar. Method of granulometric structure determination
GOST R 56512-2015 Non-destructive testing. Metod of magneting particle testing. Standard technological processes
GOST 33624-2015 Charcoal. Method for determination size distribution
GOST 17818.2-1990 Graphite. Method for determination of granulometric composition
GOST 26573.3-1985 Premixes. Method for determination of particle size
GOST 13586.2-1981 Grain. Methods for determination of foreign grain and specially counted foreigen matter, small grains and grain size
GOST 14340.1-1974 Enamelled round wires. Method for measurement of wires diameters
GOST 30044-1993 Durum wheat. Determination of proportion of non-wholly vitreous grains (Reference method)
GOST 16187-1970 Sorbents. Method for determination of granular composition
GOST 25889.4-1986 Metall-cutting machine tools. Method of checking specimens for constant diameters
GOST 33538-2015 Plant protection. Methods of detection and count of lesions on grains of cereal cultures caused by Eurygaster bugs
GOST 25645.150-1990 Galactic cosmic rays. Model of particle flux variation
GOST R 51082-1997 Wheelchairs. Method of measurement of seating and wheel dimensions
GOST 10854-2015 Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 10854-1964 Oil seeds. Methods of determination of foreign matter, odour, taste and colour
GOST 32989.1-2014 Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 1 mm and above
GOST 32989.2-2014 Solid biofuels. Determination of particle size distribution. Part 2. Vibrating screen method using sieve apertures of 3,15 mm and below
GOST 27707-2007 Unshaped refractories. Methods for determination of grain composition
GOST 12042-1980 Seed of farm crops. Methods of determination of 1000 seed weight
GOST 27707-1988 Refractories unshaped. Method of testing of grain composition

American Society for Testing and Materials (ASTM), Method of Particle Size Detection

ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D502-89(1995)e1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D502-89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E725-96(2006) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM E725-96(2020) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E725-96 Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E725-96(2001) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM E2316-14(2019)e1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E1294-89(1999) Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM E2316-14 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM F205-94(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM E2316-03(2014) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D6290-18 Standard Test Method for Color Determination of Plastic Pellets
ASTM D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
ASTM D6290-19 Standard Test Method for Color Determination of Plastic Pellets
ASTM E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e3 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e1 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM D185-07(2023) Standard Test Methods for Coarse Particles in Pigments
ASTM E112-10 Standard Test Methods for Determining Average Grain Size
ASTM E112-12 Standard Test Methods for Determining Average Grain Size
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM A966/A966M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ASTM D1890-96 Standard Test Method for Beta Particle Radioactivity of Water
ASTM D1943-05(2012) Standard Test Method for Alpha Particle Radioactivity of Water&thinsp
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E2316-03e1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E2316-03 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E727/E727M-08(2013) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM C690-09(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
ASTM D8490-23a Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM D6290-05 Standard Test Method for Color Determination of Plastic Pellets
ASTM F577-03 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-03e1 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM F577-83(1997) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D1511-00e2 Standard Test Method for Carbon Black-Pellet Size Distribution
ASTM D6290-13 Standard Test Method for Color Determination of Plastic Pellets
ASTM E1037-21 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM F577-03(2009) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E2490-08 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-09(2021) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D2067-97 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2003) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM F24-04 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-00 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D4176-04e1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-04 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4096-91(2003) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM F205-94(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM E1182-93(1998) Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning

Malaysia Standards, Method of Particle Size Detection

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

Korean Agency for Technology and Standards (KATS), Method of Particle Size Detection

KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS D 0305-2014(2019) Methods for determining average grain size of magnesium alloy sheets
KS D 4121-2009 TESTING METHOD OF CAST SHOT AND GRIT GRAIN SIZE
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS I 3213-2009 Testing methods for concentration of fine particles in highly purified water
KS F 2511-2007 Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS H 2147-1994 Testing methods for doenjang
KS F 2371-2007 Testing method for bulk density of granular insulations
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS F 2371-1982 Testing method for bulk density of granular insulations
KS B 5409-2013(2018) Photographic lenses?Methods for the measurement of the effective aperture, F-number and relative aperture
KS P ISO 17190-3:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
KS B 5640-2001(2016) Testing method of multi-path ultrasonic flowmeter
KS J ISO 10272-1:2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method
KS M 1425-2004(2010) Testing method for particle size distribution of palletized media by sieving
KS K 0751-1998 TESTING METHOD FOR DETERMINING APPARENT OPENING SIZE(AOS) OF GEOTEXTILE
KS B ISO 4291-2014(2019) Methods for the assessement of depature from roundness — Measurement of variations in radius
KS P ISO 17190-3-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
KS D 0305-2014 Methods for determining average grain size of magnesium alloy sheets
KS M 5976-1994(2000) TEST METHOD FOR PARTICLE SIZE AND DISTRIBUTION OF POWDER COATING
KS B 9703-2008 Measurement of turning dimensions of wheeled construction machinery
KS L ISO 8486-2:2013 Bonded abrasives —- Determination and designation of grain size distribution —- Part 2: Microgrits F230 to F2000
KS L ISO 8486-1:2013 Bonded abrasives — Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220
KS D 0210-1992(2022) MacroStructure Detecting Method for Steel
KS M 1425-2013 Testing method for particle size distribution of palletized media by sieving

IN-BIS, Method of Particle Size Detection

American National Standards Institute （ANSI), Method of Particle Size Detection

ANSI/ASTM D1921:2001 Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)
ANSI/SCTE 33-2010 Test Method for Diameter of Drop Cable
ANSI/SCTE 312007-2008 Test Method for Measuring Diameter Over Core
ANSI/ASTM A966:1996 Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ANSI/ASAE S424.1-1992 Method of Determing and Expressing Particle Size of Chopped Forage Materials by Screening

Japanese Industrial Standards Committee (JISC), Method of Particle Size Detection

JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS G 0551:1977 Methods of austenite grain size test for steel
JIS G 0552:1977 Methods of ferrite grain size test for steel
JIS Z 8820-1:2002 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines
JIS R 1666:2005 Testing method for macro-heterogeneity in microstructure of fine ceramics
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS G 5904:1966 Testing method of cast shot and grit grain size
JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture
JIS B 9923:1997 Clean room garment -- Methods for sizing and counting particle contaminants in and on clean room garments
JIS H 0542:2008 Methods for determining average grain size of magnesium alloy sheets
JIS R 2652:1991 Testing method for grain size of light weight castable refractories
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system
JIS K 6219:1997 Testing methods of properties of pellets of carbon black for rubber industry
JIS A 1306:2014 Measuring method of smoke density using light extinction method
JIS Z 2340:2002 Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing

British Standards Institution (BSI), Method of Particle Size Detection

BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS DD CEN/TS 15149-1:2006 Solid biofuels - Methods for the determination of particle size distribution - Oscillating screen method using sieve apertures of 3, 15 mm and above
19/30401676 DC BS ISO 22863-6. Fireworks. Test methods for determination of specific chemical substances. Part 6. Zirconium with a particle size of less than 40 μm by Inductively Coupled Plasma Optical Emission Spectrometry(ICP-OES)
BS 4490:1989 Methods for micrographic determination of the grain size of steel
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method
BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS ISO 10505:2009 Photography - Root mean square granularity of photographic films - Method of measurement
BS 3406-7:1988 Methods for determination of particle size distribution - Recommendations for single particle light interaction methods
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
BS 7425-2:1991 Abrasive grains - Method for determining the capillarity
PD ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR methods for the detection of CaMV and Agrobacterium Ti-plasmid derived DNA sequences
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN 60970:2007 Insulating liquids - Methods for counting and sizing particles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method of Particle Size Detection

GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
GB/T 3780.17-1995 Carbon black--Indirect determination of particle size--Reflectance method
GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
GB/T 3780.17-2008 Carbon black.Part 17: Indirect determination of particle size.Reflectance method
GB/T 2441.7-2001 Determination of Urea Determination of particle size Sieve method
GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 26826-2011 Measurement for diameter of carbon nanotubes
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 25769-2010 Rolling bearings.Measuring methods for radial internal clearance
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 20405.3-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 3: Determination of particle size distribution by sieve fractionation
GB/T 2441.7-2010 Determination of urea-Part 7: Particle size-Sieve method
GB/T 11446.9-1997 Test method for particles in electronic grade water by instrument
GB/T 11446.9-2013 Test method for particles in electronic grade water by instrument
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 11073-1989 Standard method for measuring radial resistivity variation on silicon slices
GB/T 11073-2007 Standard method for measuring radial resistivity variation on silicon slices
GB/T 23192-2008 Method for determination of starch grains in honey.Count with microscope
GB/T 13025.1-1991 General test method in salt industry--Determination of grain size
GB/T 13025.1-2012 General test method in salt industry.Determination of grain size
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 26647.1-2011 Determination of particle size distribution.Single-particle light interaction methods.Part 1:Light interaction considerations
GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
GB/T 12496.2-1999 Test methods of wooden activated carbon-Determination of particle size distribution
GB/T 7702.15-1997 Standard test method for granular activated carbon from coal--Determination of ash content
GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
GB/T 7702.1-1997 Standard test method for granular activated carbon from coal--Determination of moisture content
GB/T 7702.16-1997 Standard test method for granular activated carbon from coal--Determination of pH value
GB/T 7235-1987 Methods for the assessment of departure from roundness--Measurement of variations in radius
GB/T 21728-2008 Determination of fluoride content in brick tea

HU-MSZT, Method of Particle Size Detection

Guangxi Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB45/T 1151-2015 Method for testing the number of yellow grains in white granulated sugar products

Group Standards of the People's Republic of China, Method of Particle Size Detection

T/GDCKCJH 044-2021 On-site test methods for diameter and roundness of expanded pipe
T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
T/GMES 015-2019 Test and detection method for silage corn kernel breakage rate
T/CAS 542-2021 Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant
T/SHSYCXH 10-2022 Detection of supercoiled plasmid DNA —Capillary gel electrophoresis method

PL-PKN, Method of Particle Size Detection

PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
PN M55551-03-1985 Metal cutting machin? tools ethods of measurement of adial runout

Professional Standard - Commodity Inspection, Method of Particle Size Detection

SN/T 0736.3-1997 Method of inspection for import and export fertilizers.Determination of granule size
SN/T 0736.3-2011 Test method of import and export fertilizers.Part 3:Determination of granule size
SN/T 0480.1-1995 Method of analysis baryte for export.Determination of size
SN/T 3533-2013 Test method of toys that contain magnets
SN/T 0990-2001 Method for the determination of whiteness,acidity and swelling capacity of granular bentonite for export

国家市场监督管理总局、中国国家标准化管理委员会, Method of Particle Size Detection

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 40324-2021 Non-destructive testing—Testing method for large diameter round bars by focused ultrasound
GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
GB/T 40307-2021 Non-destructive testing—Test method for texture by neutron diffraction
GB/T 40632-2021 The determination for polysaccharides in bamboo leaves
GB/T 40174-2021 Purity detection method of reagent enzymes

Association Francaise de Normalisation, Method of Particle Size Detection

NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF C27-232*NF EN 60970:2007 Insulating liquides - Methods for counting and sizing particles.
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
NF U43-217:1981 Agropharmaceutical products. Method of particle size determination for "micronized" sulphurs.
NF EN 61300-3-36:2000 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-36 : examens et mesures - Méthodes de mesure des diamètres intérieurs et extérieurs des embouts de connecteurs pour ...
NF P98-818-2/IN1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : particle size distribution.
NF EN ISO 21083-1:2018 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1 : spectre granulométrique de 20 nm à 500 nm
NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF EN 15415-2:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Méthode (manuelle) de projection de la longueur maximale des particules de grande dimension
NF EN 15415-1:2011 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 1 : méthode de criblage pour des particules de petites dimensions
NF EN 60749-16:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 16 : détection de bruit d'impact de particules (PIND)
NF ISO 22863-6:2021 Artifices de divertissement - Méthodes d'essai pour la détermination de substances chimiques spécifiques - Partie 6 : zirconium de granulométrie inférieure à 40 µm par spectrométrie d'émission optique à plasma à couplage inductif (ICP-OES)
NF S57-037-6*NF ISO 22863-6:2021 Fireworks - Test methods for determination of specific chemical substances - Part 6 : zirconium with a particle size of less than 40 μm by inductively coupled plasma optical emission spectrometry (ICP-OES)

Professional Standard-Ships, Method of Particle Size Detection

CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

Professional Standard - Building Materials, Method of Particle Size Detection

JC/T 2664-2022 China ISO Standard Sand Grain Size Testing Method

Association of German Mechanical Engineers, Method of Particle Size Detection

VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3491 Blatt 2-2017 Measurement of particles - Methods for generating test aerosols - Dispersing liquids

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method of Particle Size Detection

GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
GB/T 3780.17-2017 Carbon black—Part 17: Indirect determination of particle size—Reflectance method
GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 33210-2016 Non-destructive testing—Test method for determining residual stresses by electromagnetic technology

Professional Standard - Ferrous Metallurgy, Method of Particle Size Detection

YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface

International Organization for Standardization (ISO), Method of Particle Size Detection

ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 10505:2009 Photography - Root mean square granularity of photographic films - Method of measurement
ISO 17190-3:2001 Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation
ISO 17190-3:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 3: Test method for determination of the particle size distribution by sieve fractionation
ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 7: Real-time PCR based methods for the detecti
ISO 2624:1990 Copper and copper alloys; estimation of average grain size

Standard Association of Australia （SAA）, Method of Particle Size Detection

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS 1141.32:1995 Methods for sampling and testing aggregates Method 32: Weak particles (including clay lumps, soft and friable particles ) in coarse aggregates
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
AS 1733:1976 Methods for the determination of grain size in metals
AS 3706.10.1:2012
AS 1141.31:1997 Methods for sampling and testing aggregates - Light particles
AS 1141.19:1998 Methods for sampling and testing aggregates - Fine particle size distribution in road materials by sieving and decantation
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 1141.32:2019 Methods for sampling and testing aggregates, Method 32: Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
AS 1141.11.1:2009/Amdt 1:2011
AS 3706.7:2014
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method for determining the dimensions of pipes and fittings
AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS 1012.11:2000 Methods of testing concrete - Determination of the modulus of rupture
AS 1289.4.4.1:2017 Methods of testing soils for engineering purposes, Method 4.4.1: Soil chemical tests — Determination of the electrical resistivity of a soil — Method for fine granular materials
AS 1141.33:1997 Methods for sampling and testing aggregates - Clay and fine silt (settling method)

European Committee for Standardization (CEN), Method of Particle Size Detection

prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion
prEN 772-16-1992 Methods of test for masonry units; part 16: determination of size and dimensions (excluding natural stone masonry units)
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
PD CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of nondestructive tests
EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN ISO 2624:1995 Copper and Copper Alloys - Estimation of Average Grain Size
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 1097-2:1998 Tests for Mechanical and Physical Properties of Aggregates - Part 2: Methods for the Determination of Resistance to Fragmentation Includes amendment A1:July 2006

Professional Standard - Textile, Method of Particle Size Detection

FZ/T 80013-2012 Cleanroom garment.Test method of easy shed large particles

VN-TCVN, Method of Particle Size Detection

TCVN 3121-1-2003 Mortar for masonry.Test methods Part 1: Determination of maximum particle size of aggregate
TCVN 5352-1991 Graphite.Method for the determination of granulometric composition
TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester
TCVN 4396-1986 Non-destructive testing.Method of magnetic particle testing
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 5459-1991 Synthetic detergents.Method for the determination of Granular component

Professional Standard - Agriculture, Method of Particle Size Detection

302药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4001 Determination of water resistance of glass particles at 121°C
GB/T 2448-1991 Determination of urea particle size by sieving method
JAP-142 Other methods for the detection method of ceftiofur
NY/T 56-1987 Pretreatment method for determination of amino acids in cereal grains
GB 7649-1987 Pretreatment method for the determination of amino acids in cereal grains

工业和信息化部, Method of Particle Size Detection

JB/T 13471-2018 Non-destructive testing method for online electromagnetic monitoring of metal abrasive particles in oil
SJ/T 11638-2016 Test methods for particles in electronic chemicals

Indonesia Standards, Method of Particle Size Detection

SNI 14-4350-1996 Test method for fibre diameter
SNI 08-4418-1997 Test method for pore size of geotextile
SNI 02-0831.1-1998 Procedures and test methods for power paddy threshers, straw throw - in types
SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods
SNI 03-6829-2002 Test method of emulsion asphalt residue content by evaporation
SNI 06-6438-2000 Test methods for ferro bacteria in water and in water performed sediment
SNI 7619-2012 Metode uji penentuan persentase butir pecah pada agregat kasar

Anhui Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Professional Standard - Aerospace, Method of Particle Size Detection

QJ 1323.18-1987 Electromagnetic relay test method Particle impact noise detection
QJ 2863-1996 Particle impact noise detection (PIND) requirements and methods for aerospace electronic components

Shaanxi Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB61/T 1220-2018 Ultrasonic water immersion testing method for small-diameter thin-walled seamless pipes

CZ-CSN, Method of Particle Size Detection

CSN 56 0160 Cast.9-1988 Methods of testing of sugar products. Determination method of granulometric composition
CSN 49 0161-1986 Method for the determination of warping of particle boards
CSN 66 8102 Cast.4-1978 Smokeless powders. Methods of testing. Determination of grain dimensions
CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
CSN 65 4824-1982 Fertilizers. Method for the determination of static strongth o? granules
CSN 65 2482-1981 Sodium Chloride (Salt) Metod ol Granulometric Composition Determlnatlon
CSN 35 8568-1966 Methods of measurement of spot diameter of television plcture tubes
CSN 42 0890 Cast.13-1984 Testing of metallic powders. Determination of particle size by microscopic method
CSN 56 0512-5-1995 Methods of milled products Part 5: Determination of granularity
CSN 56 0512-6-1995 Methods of milled products Part 5: Determination of granularity
CSN 46 7013 Cast.3/2-1977 Testing methods for fodder mixtures. Sensory and physical tests. Determination of granularity

Professional Standard - Automobile, Method of Particle Size Detection

QC/T 296-1999 Test method for testing the calibrated diameter of automobile rims with a ball tape measure

GM North America, Method of Particle Size Detection

GM GM9007P-1988 Method for Checking Radial Lip Seal Garter Springs
GM GM9001P-1988 Method for Gaging Seal Lip Diameter

GM Daewoo, Method of Particle Size Detection

GMKOREA EDS-T-4602-2011 Method for Checking Radial Lip Seal Garter Springs
GMKOREA EDS-T-4604-2011 Method for Gaging Seal Lip Diameter
GMKOREA EDS-T-7662-2011

German Institute for Standardization, Method of Particle Size Detection

DIN EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN 50452-1:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN EN ISO 17892-4:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016); German version EN ISO 17892-4:2016
DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN EN 60749-16:2003-09 Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003); German version EN 60749-16:2003
DIN EN 60970:2008 Insulating liquids - Methods for counting and sizing particles (IEC 60970:2007); German version EN 60970:2007 + Corrigendum: 2008
DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles

Professional Standard - Environmental Protection, Method of Particle Size Detection

HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)

工业和信息化部/国家能源局, Method of Particle Size Detection

JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil

Professional Standard - Aviation, Method of Particle Size Detection

HB/Z 75-2012 Ultrasonic testing method for small-diameter thin-wall seamless steel pipe used in aviation

NZ-SNZ, Method of Particle Size Detection

NZS 4407.3.7.1:1991 Methods of sampling and testing road aggregates Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve
NZS 4407.3.13:1991 Methods of sampling and testing road aggregates Test 3.13 The size and shape of aggregate particles
AS/NZS 2341.22:1996 Methods of Testing Bitumen and Related Roadmaking Products Method 22: Determination of Particle Charge

Professional Standard - Non-ferrous Metal, Method of Particle Size Detection

YS/T 587.12-2006 Calcined coke for prebaked blocks. Testing methods. Part 12: Determination of particle size distribution
YS/T 587.11-2006 Calcined coke for prebaked blocks. Testing methods. Part 11: Determination of grain stability

YU-JUS, Method of Particle Size Detection

JUS K.F0.082-1989 Grains of ?iamon? and cublc boron nitrIde for bonded abrasive products. Hatbod of test of macrogrits
JUS F.S2.254-1989 Testing of texil.es. Air permeabilttv method for measuring the mean diameter of raw-grease wool fibres
JUS F.S2.252-1989 Testing of textiles. Wool. Determination of mean diameter of fibres. Air permeabilitv method
JUS K.F0.008-1989 Grains of fused alvminium oxide and silicon carbide for abrasive products. ttethod for the determination of friability of the abrasive grains
JUS K.F0.007-1989 Gralas of fused aluminium oxlde and silicon carbide for abrasive products. Metbod for tbe determination of capillarlty of tbe abrasive graios
JUS H.K8.022-1979 Testing methods for adhesives. Determination ofviscosity

Military Standard of the People's Republic of China-General Armament Department, Method of Particle Size Detection

GJB 9255-2017 Comprehensive aberration detection method for large-aperture laser emission system Hartmann method
GJB 360.26-1987 Test methods for electronic and electrical components Particle impact noise detection
GJB 1047.11-1990 Black powder test method Determination of particle size
GJB 9890.2-2020 Detection and evaluation of structure of GH4169 alloy for aviation use Part 2: Grain size evaluation method
GJB 1047.11A-2020 Test methods for black powder Part 11: Determination of particle size
GJB 1047.11A-2004 Test methods for black powder Part 11: Determination of particle size
GJB 772.406-1989 Explosives test methods Determination of hard slag or insoluble particles

International Telecommunication Union (ITU), Method of Particle Size Detection

ITU-T P.75 FRENCH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
ITU-T P.75 SPANISH-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES
ITU-T P.75-1989 Standard Conditioning Method for Handsets with Carbon Microphones - Telephone Transmission Quality (Study Group XII) 1 pp
ITU-T P.75-1988 STANDARD CONDITIONING METHOD FOR HANDSETS WITH CARBON MICROPHONES

PK-PSQCA, Method of Particle Size Detection

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

Professional Standard - Electricity, Method of Particle Size Detection

DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method

Professional Standard - Machinery, Method of Particle Size Detection

JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
JB/T 3573-2004 Rolling bearings-Methods for the measurement of radial internal clearance

ZA-SANS, Method of Particle Size Detection

SANS 50143:2003 Respiratory protective devices - Particle filters - Requirements, testing, marking
SANS 50149:2003 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking

AR-IRAM, Method of Particle Size Detection

IRAM 122-1959

Association of Official Analytical Chemists (AOAC), Method of Particle Size Detection

AOAC Official Method 993.01 Detection method of phosphorus amine

AT-ON, Method of Particle Size Detection

ONORM M 1157-2-1994 Testing methods for foundry sands - Determination of fines content
ONORM ISO 4291:1988 Methods for the assessment of departure from roundness; measurement of variations in radius

The American Road & Transportation Builders Association, Method of Particle Size Detection

AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

AASHTO - American Association of State Highway and Transportation Officials, Method of Particle Size Detection

T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils
T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate
T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

CH-SNV, Method of Particle Size Detection

VSM 34217.2-1938

KR-KS, Method of Particle Size Detection

KS B 5409-2023 Methods for the measurement of the effective aperture, F-number and relative aperture of photographic lenses
KS J ISO 10272-1-2020 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method1：Detection method

Professional Standard - Coal, Method of Particle Size Detection

MT/T 1156-2011 Determination of the particle-size distribution of powdered activated carbon by wet method
MT/T 1155-2011 Determination of Dechlorination Half-Value length of granular activated carbon

CU-NC, Method of Particle Size Detection

NC 05-08-1986 Metallography. Determination of Metals Grain Size, Testing Method

VE-FONDONORMA, Method of Particle Size Detection

Professional Standard - Civil Aviation, Method of Particle Size Detection

MH/T 6068-2010 Standard test method for free water, particulate and other contamination in aviation fuel-Field inspection procedures
MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures

Professional Standard - Electron, Method of Particle Size Detection

SJ 2798-1987 Method for determination of particles in electronic grade gases--Light scattering method
SJ 2253-1982 Method of measurement of granularity of cathode carbonate

Shanghai Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB31/T 1177-2019 Corrosion and thinning detection and evaluation method of large-diameter industrial gas pipeline without continuous transmission

BR-ABNT, Method of Particle Size Detection

Hebei Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

Danish Standards Foundation, Method of Particle Size Detection

DS/ISO 4291:1990 Methods for the assessment of departure from roundness — Measurement of variations in radius
DS/EN 61300-3-36:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules

AENOR, Method of Particle Size Detection

UNE 82320:1995 METHODS FOR THE ASSESSMENT OF DEPARTURE FROM ROUNDNESS. MEASUREMENT OF VARIATIONS IN RADIUS.
UNE-EN 60749-16:2003 Semiconductor devices. Mechanical and climatic test methods. Part 16: Particle impact noise detection (PIND)
UNE-EN 61300-3-36:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules.

CEN - European Committee for Standardization, Method of Particle Size Detection

PD CEN/TS 15150:2005 Solid biofuels - Methods for the determination of particle density

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Method of Particle Size Detection

ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks

RO-ASRO, Method of Particle Size Detection

STAS 7653/3-1986 BALL RADIAL BEARINGS Measuring method of vibrations level

SAE - SAE International, Method of Particle Size Detection

SAE J1971-1989 Radial Lip Seal Torque - Measurement Method and Results@ Recommended Practice
SAE J1971-2002 Radial Lip Seal Torque-Measurement Method and Results

Society of Automotive Engineers (SAE), Method of Particle Size Detection

SAE J1971-2000 Radial Lip Seal Torque—Measurement Method and Results

ESDU - Engineering Sciences Data Unit, Method of Particle Size Detection

ESDU 91027 A-1993 Non-destructive examination - choice of methods.

Inner Mongolia Provincial Standard of the People's Republic of China, Method of Particle Size Detection

DB15/T 536-2013 Detection method of ovine lung adenomatosis PCR method

ES-AENOR, Method of Particle Size Detection

UNE 68-081-1988

中国有色金属工业总公司, Method of Particle Size Detection

YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces

GOSTR, Method of Particle Size Detection

GOST R 57103-2016 Specialized food products. Methods of sampling, detection and determination of nanoparticles and nanomaterials in the composition of agricultural and food products

TN-INNORPI, Method of Particle Size Detection

NT AB 019-1970 Algemene beproevings-en verificatiemethoden

TR-TSE, Method of Particle Size Detection

TS 3525-1980 TEST METHOD FOR FRIABLE PARTICLES OF BLAST FURNACE SLAG AGGREGATES FOR CONCRETE