ZH
RU
ES

Particle size measurement method

Particle size measurement method, Total:498 items.

In the international standard classification, Particle size measurement method involves: Animal feeding stuffs, Particle size analysis. Sieving, Soil quality. Pedology, Analytical chemistry, Air quality, Products of the chemical industry, Production of metals, Testing of metals, Test conditions and procedures in general, Road engineering, Plastics, Cutting tools, Environmental protection, Cereals, pulses and derived products, Semiconducting materials, Electrical wires and cables, Materials for the reinforcement of composites, Components and accessories for telecommunications equipment, Rubber, Ceramics, Raw materials for rubber and plastics, Products of non-ferrous metals, Insulating fluids, Optics and optical measurements, Photography, Rubber and plastics products, Protection of and in buildings, Bearings, Spices and condiments. Food additives, Valves, Linear and angular measurements, Aids for disabled or handicapped persons, Measurement of fluid flow, Physics. Chemistry, Ferrous metals, Structures of buildings, Fuels, Metalliferous minerals, Clothes, Fibre optic communications, Nuclear energy engineering, Domestic, commercial and industrial heating appliances, Farming and forestry, Ferroalloys, Internal combustion engines, Paper production processes, Road vehicle systems, Paints and varnishes, Products of the textile industry, Document imaging applications, Power stations in general, Sugar. Sugar products. Starch, Water quality, Construction materials, Materials and components for railway engineering, Fertilizers, Waxes, bituminous materials and other petroleum products, Earthworks. Excavations. Foundation construction. Underground works, Pesticides and other agrochemicals, Cork and cork products, Microbiology, Lubricants, industrial oils and related products, Wood, sawlogs and sawn timber, Non-metalliferous minerals, Civil engineering in general, Optoelectronics. Laser equipment, Natural gas, Compressors and pneumatic machines, Milk and milk products, Protection against dangerous goods, Equipment for the chemical industry, Semi-manufactures of timber, Tobacco, tobacco products and related equipment, Protective equipment, Road vehicles in general, Headgear. Clothing accessories. Fastening of clothing, Powder metallurgy, Graphic technology, Textile fibres, Agricultural machines, implements and equipment, Materials for aerospace construction, Paint ingredients, Capacitors, Fluid power systems, Vocabularies, Coals.

American Society for Testing and Materials (ASTM), Particle size measurement method

ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D502-89(1995)e1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D502-89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM F205-94(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM F577-03 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-03e1 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM F577-83(1997) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM E1037-21 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM F577-03(2009) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM F24-04 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-00 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM F205-94(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM E1182-93(1998) Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D1739-98(2004) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D1739-98 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM E1358-97(2006) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
ASTM E1358-97 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D2434-22 Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F81-00 Standard Test Method for Measuring Radial Resistivity Variation on Silicon Wafers
ASTM E725-96(2006) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM C142/C142M-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM D8120-17 Standard Test Method for Ferrous Debris Quantification
ASTM E725-96(2020) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E725-96 Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E725-96(2001) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
ASTM E1534-93(2006) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM E2316-14(2019)e1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E1534-93(1998) Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
ASTM D1739-98(2010) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM E1382-97 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1382-97(2004) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM E2316-14 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E2316-03(2014) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D1937-03 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
ASTM D6290-18 Standard Test Method for Color Determination of Plastic Pellets
ASTM D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
ASTM D6290-19 Standard Test Method for Color Determination of Plastic Pellets
ASTM E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e3 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e1 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM D185-07(2023) Standard Test Methods for Coarse Particles in Pigments
ASTM E112-10 Standard Test Methods for Determining Average Grain Size
ASTM E112-12 Standard Test Methods for Determining Average Grain Size
ASTM E3238-20 Standard Test Method for Quantitative Measurement of the Chemoattractant Capacity of a Nanoparticulate Material in vitro
ASTM E1182-01 Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning (Withdrawn 2002)
ASTM D3375-18 Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
ASTM D7503-10 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

RU-GOST R, Particle size measurement method

GOST 26573.3-2014 Premixes. Method for determination of particle size
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 275-1956 Groats. Methods for determination of quality
GOST 26573.3-1985 Premixes. Method for determination of particle size
GOST 14340.1-1974 Enamelled round wires. Method for measurement of wires diameters
GOST R 51082-1997 Wheelchairs. Method of measurement of seating and wheel dimensions
GOST 12042-1980 Seed of farm crops. Methods of determination of 1000 seed weight
GOST 12579-2013 Sugar. Method of granulometric structure determination
GOST 13056.4-1967 Seeds of forest and shrub species. Methods for determination 1000 seedweight
GOST 32517.1-2013 Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron
GOST R 54365-2011 Round timber. Top diameter and taper method of volume measurement
GOST 33624-2015 Charcoal. Method for determination size distribution
GOST 17818.2-1990 Graphite. Method for determination of granulometric composition
GOST 13586.2-1981 Grain. Methods for determination of foreign grain and specially counted foreigen matter, small grains and grain size
GOST 26086-1984 Lasers. Methods for measurement of beam diameter and beam energy divergence angle
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST 32279-2013 Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content
GOST 16187-1970 Sorbents. Method for determination of granular composition
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size
GOST 32518.1-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method
GOST R 59582-2021 Nanotechnologies. Antibacterial silver nanoparticles. Characteristics and measurement methods
GOST R 54062-2010 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST 22617.4-1991 Beet seeds. Methods for determinations of 1000 seeds mass and one sowing unit mass

Association Francaise de Normalisation, Particle size measurement method

NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF C27-232*NF EN 60970:2007 Insulating liquides - Methods for counting and sizing particles.
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
NF EN ISO 21083-1:2018 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1 : spectre granulométrique de 20 nm à 500 nm
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF C93-840-1-45*NF EN IEC 60793-1-45:2018 Optical fibres - Part 1-45 : measurement methods - Mode field diameter measurement
NF EN IEC 60793-1-45:2018 Fibres optiques - Partie 1-45 : méthodes de mesure - Mesure du diamètre du champ de mode
NF EN 61300-3-36:2000 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-36 : examens et mesures - Méthodes de mesure des diamètres intérieurs et extérieurs des embouts de connecteurs pour ...
NF EN 60793-1-43:2015 Fibres optiques - Partie 1-43 : méthodes de mesure et procédures d'essai - Mesure de l'ouverture numérique
NF EN 15238:2022 Amendements du sol et supports de culture - Détermination de la quantité pour les matériaux de granulométrie supérieure à 60 mm
NF EN 61341:2012 Méthode de mesure de l'intensité dans l'axe du faisceau et de l'angle (ou des angles) d'ouverture des lampes à réflecteur
NF U43-217:1981 Agropharmaceutical products. Method of particle size determination for "micronized" sulphurs.
NF C93-840-1-43*NF EN 60793-1-43:2015 Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture measurement
NF P98-818-2/IN1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : particle size distribution.
NF E11-099:2021 Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
NF X45-405:1996 Granular filter media. Test methods. Measurement of the cake density of a filter aid.
NF X45-404:1996 Granular filter media. Test methods. Measurement of the permeability of a filter aid.
NF X43-003:1966 Atmospheric pollution. Method of weight determination of solid particles entrained by combustion gases.
NF E51-308*NF ISO 8573-8:2004 Compressed air - Part 8 : test methods for solid particle content by mass concentration
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique

Korean Agency for Technology and Standards (KATS), Particle size measurement method

KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS D 0305-2014(2019) Methods for determining average grain size of magnesium alloy sheets
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS F 2371-2007 Testing method for bulk density of granular insulations
KS F 2371-1982 Testing method for bulk density of granular insulations
KS B 5640-2001(2016) Testing method of multi-path ultrasonic flowmeter
KS F 2302-2002 Test method for particle size distribution of soils
KS B 5409-2013(2018) Photographic lenses?Methods for the measurement of the effective aperture, F-number and relative aperture
KS D 4121-2009 TESTING METHOD OF CAST SHOT AND GRIT GRAIN SIZE
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS B ISO 4291-2014(2019) Methods for the assessement of depature from roundness — Measurement of variations in radius
KS B 9703-2008 Measurement of turning dimensions of wheeled construction machinery
KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS X ISO 6342-2007(2022) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS F 2333-2005 Testing method for moisture-penetration resistance relations of fine-grained soils
KS F 2360-2006 Testing method for degree of particle coating of asphalt-aggregate mixture
KS C IEC 60793-1-45-2003(2018)
KS X ISO 6342-2007(2017) Micrographics－Aperture cards－Method of measuring thickness of buildup area
KS F 2516-2014 Standard test method for content of soft particles in coarse aggregate by scratching
KS F 2516-2014(2020) Standard test method for content of soft particles in coarse aggregate by scratching
KS I 3213-2009 Testing methods for concentration of fine particles in highly purified water
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS F 2511-2007 Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS L 1617-2002 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of content of coarse particles in ceramic powders by wet sieving method
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS D 0209-1982(1997) DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS D 0209-1982 DETERMINATION OF FERRITE GRAIN SIZE TEST FOR STEEL
KS B ISO 4291:2004 Methods for the assessment of departure from roundness-Measurement of variations in radius
KS B ISO 4291:2014 Methods for the assessement of depature from roundness — Measurement of variations in radius
KS B 6741-1995(2000) MEASURING METHODS FOR AIRBORN PARTICLES IN CLEAN ROOM AND EVALUATING METHODS FOR AIR CLEANLINESS OF CLEAN ROOM
KS M 9900-2007 Measuring methods for airborn particles in clean room and evaluating methods for air cleanliness of clean room
KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope

Association of German Mechanical Engineers, Particle size measurement method

VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
VDI 3491 Blatt 2-2017 Measurement of particles - Methods for generating test aerosols - Dispersing liquids
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
VDI 3491 Blatt 2-1980 Particulate matter measurement; production methods of test aerosols; foundations and synoptics
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load

IN-BIS, Particle size measurement method

American National Standards Institute （ANSI), Particle size measurement method

ANSI/ASTM D1921:2001 Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)
ANSI/SCTE 312007-2008 Test Method for Measuring Diameter Over Core
ANSI/SCTE 33-2010 Test Method for Diameter of Drop Cable

Japanese Industrial Standards Committee (JISC), Particle size measurement method

JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture
JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS Z 8820-1:2002 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines
JIS K 3850-4:2000 Measuring method for airborne fibrous particles -- Part 4: Determination of asbestors plant emissions -- Method by fibre count measurement
JIS A 1126:2007 Method of test for content of soft particles in coarse aggregate by scratching
JIS A 1126:2001 Method of test for content of soft particles in coarse aggregate by scratching
JIS A 1223:2000 Test method for fine fraction content of soils
JIS A 1223:2009 Test method for fine fraction content of soils
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS A 1143:2001 Method of test for content of floating particles in lightweight coarse aggregate

Group Standards of the People's Republic of China, Particle size measurement method

T/CSP 8-2021 Particle technology—Microbubble size analysis —Submerged dynamic image analysis method
T/CICEIA /CAMS7-2020 Measurement methods of fine particles for mobile pollution sources
T/CEC 217-2019 Method for determination of particle content in sulfur hexafluoride gas - Light scattering method
T/CAS 542-2021 Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle

British Standards Institution (BSI), Particle size measurement method

BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS ISO 10505:2009 Photography - Root mean square granularity of photographic films - Method of measurement
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
BS 6740:1987 Method for determining departures from roundness by measuring variations in radius
BS DD CEN/TS 15149-1:2006 Solid biofuels - Methods for the determination of particle size distribution - Oscillating screen method using sieve apertures of 3, 15 mm and above
BS EN 60793-1-43:2015 Tracked Changes. Optical fibres. Measurement methods and test procedures. Numerical aperture measurement
23/30456345 DC BS ISO 11277 AMD 1. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN 60793-1-45:2004 Optical fibres - Measurement methods and test procedures - Mode field diameter
BS EN 60793-1-45:2003 Optical fibres - Part 1-45:Measurement methods and test procedures - Mode field diameter
BS 1743-19:1985 Methods for analysis of dried milk and dried milk products - Determination of scorched particles content
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS 4490:1989 Methods for micrographic determination of the grain size of steel
BS ISO 11698-1:2000 Micrographics. Methods of measuring image quality produced by aperture card scanners - Characteristics of the test images
BS 4317-1:1980 Methods of test for cereals and pulses - Determination of the mass of 1000 grains
BS EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS EN IEC 60793-1-45:2018 Tracked Changes. Optical fibres. Measurement methods and test procedures. Mode field diameter
BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
BS EN 60793-1-43:2002 Optical fibres - Measurement methods and test procedures - Numerical aperture
PD ISO/TS 20660:2019 Nanotechnologies. Antibacterial silver nanoparticles. Specification of characteristics and measurement methods
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
BS ISO 8573-4:2001 Compressed air - Test methods for solid particle content
BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS ISO 9073-11:2002 Textiles - Test methods for nonwovens - Run-off
BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle size measurement method

GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
GB/T 14140-2009 Test method for measuring diameter of semiconductor wafer
GB/T 26826-2011 Measurement for diameter of carbon nanotubes
GB/T 3780.17-1995 Carbon black--Indirect determination of particle size--Reflectance method
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 25769-2010 Rolling bearings.Measuring methods for radial internal clearance
GB/T 14140.2-1993 Silicon slices and wafers--Measuring of diameter--Micrometer method
GB/T 7235-1987 Methods for the assessment of departure from roundness--Measurement of variations in radius
GB/T 11073-1989 Standard method for measuring radial resistivity variation on silicon slices
GB/T 11073-2007 Standard method for measuring radial resistivity variation on silicon slices
GB/T 14140.1-1993 Silicon slices and wafers--Measuring of diameter--Optical projecting method
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 3780.17-2008 Carbon black.Part 17: Indirect determination of particle size.Reflectance method
GB/T 5201-2012 Test procedures for semiconductor charged particle detectors
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 7702.5-1997 Standard test method for granular activated carbon from coal--Determination of water absorption
GB/T 7702.14-2008 Test method for granular activated carbon from coal.Determination of sulphur capacity
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
GB/T 14144-2009 Testing method for determination of radial interstitial oxygen variation in silicon
GB/T 2441.7-2001 Determination of Urea Determination of particle size Sieve method
GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 32361-2015 Test methods for pore size properties of membrane filters.Bubble point and mean flow pore test
GB/T 7702.14-1997 Standard test method for granular activated carbon from coal--Determination of saturated sulphur capacity
GB/T 7702.22-1997 Standard test method for granular activated carbon from coal--Determination of breakthrough sulphur capacity
GB/T 9802-1988 Air quality--Determination of total suspended particulates--Gravimetric method
GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
GB/T 3493-1983 Standard method for measuring diameter of fine wire of the precious metals and their alloys(weighing method)
GB/T 13277.4-2015 Compressed air.Part 4:Test methods for solid particle content
GB/T 21865-2008 Standard test methods for determining average grain size using semiautomatic and automatic image analysis
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 7235-2004 Geometrical Product Specifications(GPS)Methods for the assessment of departure from roundness Measurement of variations in radius
GB/T 26570.1-2011 Determination of particle in gases.Light-scattering method.Part 1:Determination of particle in pipeline gases
GB/T 12540-2009 Minimum turning circle diameter,minimum turning clearance circle diameter and out value test method for motor vehicles
GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 6646.5-1986 Method for determination of grit and crude content in chrysotile asbestos
GB/T 20405.3-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 3: Determination of particle size distribution by sieve fractionation
GB/T 2441.7-2010 Determination of urea-Part 7: Particle size-Sieve method

Danish Standards Foundation, Particle size measurement method

DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
DS/ISO 4291:1990 Methods for the assessment of departure from roundness — Measurement of variations in radius
DS/EN 15238/AC:2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 12341:1999 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
DS/EN 60793-1-43:2002 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture
DS/EN 60793-1-45/Corr.:2004 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
DS/EN 60793-1-45:2004 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 61300-3-36:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules

German Institute for Standardization, Particle size measurement method

DIN 51813:2022 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ？m
DIN 51813:2022-08 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 µm
DIN 51813:2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004

Standard Association of Australia （SAA）, Particle size measurement method

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
AS 1733:1976 Methods for the determination of grain size in metals
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS 3706.10.1:2012
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS 1141.31:1997 Methods for sampling and testing aggregates - Light particles
AS/NZS 3580.10.2:2013
AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
AS 1141.19:1998 Methods for sampling and testing aggregates - Fine particle size distribution in road materials by sieving and decantation

PL-PKN, Particle size measurement method

PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN M55551-03-1985 Metal cutting machin? tools ethods of measurement of adial runout
PN M55551-10-1985 Metal cutting machin? tools ethod of measurement of diameter tability of test piece
PN M55551-11-1987 Metal cutting machine tools Method of measurement of diameter stability of test piece

GM North America, Particle size measurement method

GM GM9001P-1988 Method for Gaging Seal Lip Diameter

GM Daewoo, Particle size measurement method

GMKOREA EDS-T-4604-2011 Method for Gaging Seal Lip Diameter

国家市场监督管理总局、中国国家标准化管理委员会, Particle size measurement method

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 41222-2021 Soil quality—Method for monitoring the farmland surface runoff
GB/T 36677-2018 Determination of fine particle emission rates from copying (including multi-function) devices

VE-FONDONORMA, Particle size measurement method

Universal Oil Products Company (UOP), Particle size measurement method

UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

Professional Standard - Railway, Particle size measurement method

TB/T 2328.18-1992 Test method for powder content of railway gravel and ballast with particle size below 0.1mm
TB/T 2328.17-2008 Test method for railway ballast

Professional Standard - Machinery, Particle size measurement method

JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
JB/T 3573-2004 Rolling bearings-Methods for the measurement of radial internal clearance
JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal

KR-KS, Particle size measurement method

KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS B 5409-2023 Methods for the measurement of the effective aperture, F-number and relative aperture of photographic lenses
KS R 1190-2023 Test method for automotive brake wear particle measurement using brake dynamometer
KS F 2511-2022 Particle amount in aggregate Finer than 0.08 mm sieve Test method

Liaoning Provincial Standard of the People's Republic of China, Particle size measurement method

DB21/T 3158-2019 Measuring method of twisted wire outer diameter

CZ-CSN, Particle size measurement method

CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
CSN 35 8568-1966 Methods of measurement of spot diameter of television plcture tubes
CSN 66 8102 Cast.3-1997
CSN 56 0160 Cast.9-1988 Methods of testing of sugar products. Determination method of granulometric composition
CSN 49 0161-1986 Method for the determination of warping of particle boards
CSN 40 4016-1974 Ralalive measurements of activity and partical enission of radioactive products. Total flax measurement of a - or β - particles by a 4 π - proportional counter
CSN 66 8102 Cast.4-1978 Smokeless powders. Methods of testing. Determination of grain dimensions
CSN 65 4824-1982 Fertilizers. Method for the determination of static strongth o? granules
CSN 65 2482-1981 Sodium Chloride (Salt) Metod ol Granulometric Composition Determlnatlon

AT-ON, Particle size measurement method

ONORM M 1157-2-1994 Testing methods for foundry sands - Determination of fines content
ONORM ISO 4291:1988 Methods for the assessment of departure from roundness; measurement of variations in radius

Malaysia Standards, Particle size measurement method

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

ES-UNE, Particle size measurement method

UNE-CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
UNE-EN 15238:2023 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE-EN IEC 60793-1-45:2018 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter

European Committee for Standardization (CEN), Particle size measurement method

prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion
EN 15238:2022 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
prEN 772-16-1992 Methods of test for masonry units; part 16: determination of size and dimensions (excluding natural stone masonry units)
prEN 15238-2021 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

AENOR, Particle size measurement method

UNE 82320:1995 METHODS FOR THE ASSESSMENT OF DEPARTURE FROM ROUNDNESS. MEASUREMENT OF VARIATIONS IN RADIUS.
UNE-EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE 40162-1:1975 METHOD TO MEASURE AVERAGE DIAMETER OF WOOL FIBRES IN THE FORM OF COMBING WITH "AIR-FLOW" APPARATUS.
UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
UNE-EN 61300-3-36:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle size measurement method

ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks

RO-ASRO, Particle size measurement method

STAS 7653/3-1986 BALL RADIAL BEARINGS Measuring method of vibrations level
STAS 12332-1985 METHOD FOR DETERMINATION OF THEAMOTNT OF SOLID PARTICLES IN WELDING FUMES GENERATED BY COVERED ELECTRODES

SAE - SAE International, Particle size measurement method

SAE J1971-1989 Radial Lip Seal Torque - Measurement Method and Results@ Recommended Practice
SAE J1971-2002 Radial Lip Seal Torque-Measurement Method and Results
SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

Society of Automotive Engineers (SAE), Particle size measurement method

SAE J1971-2000 Radial Lip Seal Torque—Measurement Method and Results

Indonesia Standards, Particle size measurement method

SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods
SNI 14-4350-1996 Test method for fibre diameter
SNI 08-4418-1997 Test method for pore size of geotextile
SNI 02-0831.1-1998 Procedures and test methods for power paddy threshers, straw throw - in types

Professional Standard - Electron, Particle size measurement method

SJ 2667-1986 Methods of measurement of numerical aperture of optical fibres and cables
SJ/T 10557.2-1994 Methods of crystal grain structure measurement for aluminum foil for high voltage electrolytic capacitors

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle size measurement method

GB/T 3780.17-2017 Carbon black—Part 17: Indirect determination of particle size—Reflectance method
GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

Canadian Standards Association (CSA), Particle size measurement method

CSA Z223.1-M1977-1977 Method for the Determination of Particulate Mass Flows in Enclosed Gas Streams R(1999)

International Electrotechnical Commission (IEC), Particle size measurement method

IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement

VN-TCVN, Particle size measurement method

TCVN 3121-1-2003 Mortar for masonry.Test methods Part 1: Determination of maximum particle size of aggregate
TCVN 5352-1991 Graphite.Method for the determination of granulometric composition
TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

中国有色金属工业总公司, Particle size measurement method

YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces

Professional Standard - Coal, Particle size measurement method

MT 422-1996 Coal mine dust particle size distribution determination method (mass method)
MT/T 1156-2011 Determination of the particle-size distribution of powdered activated carbon by wet method

Professional Standard - Hydroelectric Power, Particle size measurement method

SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)

The American Road & Transportation Builders Association, Particle size measurement method

AASHTO T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils

BE-NBN, Particle size measurement method

NBN-ISO 2971:1992 Cigarettes and filters - Determination of nominal diameter - Pneumatic method

未注明发布机构, Particle size measurement method

BS 3321:1986(1999) Method for Measurement of the equivalent pore size of fabrics (bubble pressure test)
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Professional Standard - Electricity, Particle size measurement method

DL/T 432-2007 Determination of particulate contamination in oil

Shandong Provincial Standard of the People's Republic of China, Particle size measurement method

DB37/T 3498-2019 Determination method of phytic acid content in cereal grains

国家煤矿安全监察局, Particle size measurement method

MT/T 1173-2019 Measuring method of coal seam permeability coefficient—radial flow method

YU-JUS, Particle size measurement method

JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)

Professional Standard - Agriculture, Particle size measurement method

GB/T 2448-1991 Determination of urea particle size by sieving method

TR-TSE, Particle size measurement method

TS 1009-1971 AIR PERMEABILITY METHOD FOR MEASURING THE MEAN DIAMETER OF WOOL FIBRES

GOSTR, Particle size measurement method

GOST R 58317-2018 Weights for heavy athletics. Requirements and test methods with regards to safety

Professional Standard - Energy, Particle size measurement method

NB/SH/T 6023-2020 Quantitative test method for ferromagnetic wear particles in lubricants

European Committee for Electrotechnical Standardization（CENELEC）, Particle size measurement method

EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
EN IEC 60793-1-45:2018 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter

International Organization for Standardization (ISO), Particle size measurement method

ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 4291:1985 Methods for the assessement of departure from roundness; Measurement of variations in radius
ISO 10505:2009 Photography - Root mean square granularity of photographic films - Method of measurement
ISO 17190-3:2001 Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation

Military Standard of the People's Republic of China-General Armament Department, Particle size measurement method

GJB 8151-2013 Measurement method for wavefront aberrance of laser beam radial shearing interference
GJB 1047.11-1990 Black powder test method Determination of particle size
GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
GJB 8153-2013 Measurement for surface figure of large optical flat by Fizeau interferometric method

PK-PSQCA, Particle size measurement method

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

Lithuanian Standards Office , Particle size measurement method

LST EN 15238-2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 15238-2007/AC-2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 12341-2000 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

PT-IPQ, Particle size measurement method

NP ISO 4112:2001 Cereals and pulses Guidance on measurement of the temperature of grain stored in bulk

BELST, Particle size measurement method

STB GOST R 50933-2000 Channels and paths. Regional RRL. Main parameters and measuring methods
STB 1629-2018 Sound broadcasting channels and paths. Basic parameters and measuring methods
STB 1629-2010 Sound broadcasting channels and paths. Basic parameters and measuring methods

AR-IRAM, Particle size measurement method

IRAM 122-1959

AASHTO - American Association of State Highway and Transportation Officials, Particle size measurement method

T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils

Guangxi Provincial Standard of the People's Republic of China, Particle size measurement method

DB45/T 1151-2015 Method for testing the number of yellow grains in white granulated sugar products

工业和信息化部, Particle size measurement method

SJ/T 11638-2016 Test methods for particles in electronic chemicals

CENELEC - European Committee for Electrotechnical Standardization, Particle size measurement method

EN 60793-1-43:2002 Optical Fibres Part 1-43: Measurement Methods and Test Procedures - Numerical Aperture

ES-AENOR, Particle size measurement method

UNE 20-465-1989

Professional Standard - Environmental Protection, Particle size measurement method

HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air