ZH
RU
ES
Flexural modulus and hardness
Flexural modulus and hardness, Total:81 items.
In the international standard classification, Flexural modulus and hardness involves: Wood-based panels, Cellular materials, Paper and board, Road vehicle systems, Plastics, Glass, Fibre optic communications, Insulating materials, Raw materials for rubber and plastics, Ceramics, Construction materials, Rubber and plastics products.
RO-ASRO, Flexural modulus and hardness
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
International Organization for Standardization (ISO), Flexural modulus and hardness
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
- ISO 1827:1991 Rubber, vulcanized or thermoplastic; determination of moduls in shear or adhesion to rigid plates; quadruple shear method
- ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
AENOR, Flexural modulus and hardness
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
Korean Agency for Technology and Standards (KATS), Flexural modulus and hardness
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
- KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
- KS M ISO 11093-8:2008 Paper and board-Testing of cores-Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flexural modulus and hardness
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
European Committee for Standardization (CEN), Flexural modulus and hardness
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
Danish Standards Foundation, Flexural modulus and hardness
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
British Standards Institution (BSI), Flexural modulus and hardness
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
- PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
- BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
- BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
German Institute for Standardization, Flexural modulus and hardness
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
Lithuanian Standards Office , Flexural modulus and hardness
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
Indonesia Standards, Flexural modulus and hardness
- SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
Association Francaise de Normalisation, Flexural modulus and hardness
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
- NF EN 14771:2012 Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)
- XP P98-092-2:2000 Tests relating to the determination of expansion joints capacity - Verification of the flexion of road bridge roadway expansion joints - Part 2 : test method independent of temperature
未注明发布机构, Flexural modulus and hardness
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
GM North America, Flexural modulus and hardness
- GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
- GMP.EEBC.019-2005 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 49, 250 MPa Flexural Modulus
- GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus
- GM GMP.EEBC.002-2014 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; Replaced by GMW17187)
- GM GMP.EEBC.002-1994 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus
- GM GMP.TPU.009-1991 Thermoplastic Polyurethane - 70 Type D Hardness, 350 MPa Flexural Modulus
- GM GMP.TPU.014-1992 Thermoplastic Polyurethane - 59 Type D Hardness 90 MPa Flexural Modulus
- GM GMP.TPU.017-1994 Thermoplastic Polyurethane - 54 Type D Hardness, 95 MPa Flexural Modulus
- GM GMP.EEBC.004-2013 Thermoplastic Polyester Elastomer 47 Type D Hardness, 90 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
- GM GMP.EEBC.015-2013 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
- GM GMP.EEBC.003-2001 Thermoplastic Polyester Elastomer - 73 Type D Hardness, 560 MPa Flexural Modulus
- GM GMP.EEBC.004-2001 Thermoplastic Polyester Elastomer - 47 Type D Hardness, 90 MPa Flexural Modulus
- GM GMP.EEBC.007-2002 Thermoplastic Polyester Elastomer - 62 Type D Hardness, 300 MPa Flexural Modulus
- GM GMP.EEBC.008-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus
- GM GMP.EEBC.012-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 195 MPa Flexural Modulus
- GM GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
- GM GMP.EEBC.014-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 520 MPa Flexural Modulus
- GM GMP.EEBC.015-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus
- GM GMP.EEBC.001-2004 Thermoplastic Elastomer - Polyester, Shore D36, 45 MPa Flexural Modulus
- GM GMP.EEBC.018-2003 Thermoplastic Polyester Elastomer - 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated Modulus, Lubricated
- GM GMP.EEBC.017-2002 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus, Heat Stabilized
- GM GMP.TES.009-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A86, 105 MPa Flexural Modulus, Interior, Paintable
- GM GMP.TES.008-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A87, 100 MPa Flexural Modulus, Interior, Paintable
Professional Standard - Light Industry, Flexural modulus and hardness
- QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes
Japanese Industrial Standards Committee (JISC), Flexural modulus and hardness
- JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
AT-ON, Flexural modulus and hardness
- ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ES-AENOR, Flexural modulus and hardness
Society of Automotive Engineers (SAE), Flexural modulus and hardness
- SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates
SAE - SAE International, Flexural modulus and hardness
- SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)
RU-GOST R, Flexural modulus and hardness
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
Standard Association of Australia （SAA）, Flexural modulus and hardness
- AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
NZ-SNZ, Flexural modulus and hardness
- AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)
American Society for Testing and Materials (ASTM), Flexural modulus and hardness
- ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
- ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
- ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
IN-BIS, Flexural modulus and hardness
GM Global, Flexural modulus and hardness
- GMW 16826-2013 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow, Low Density Issue 2; English
- GMW 16827-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, Weather Resistant, High Flow, Low Density Issue 1; English
工业和信息化部, Flexural modulus and hardness
- JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
VN-TCVN, Flexural modulus and hardness
- TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
International Electrotechnical Commission (IEC), Flexural modulus and hardness
- IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
American National Standards Institute （ANSI), Flexural modulus and hardness
- ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending