ZH
RU
ES

Flexural modulus and flexural strength

Flexural modulus and flexural strength, Total:499 items.

In the international standard classification, Flexural modulus and flexural strength involves: Wood-based panels, Cellular materials, Semi-manufactures of timber, Ceramics, Footwear, Construction materials, Wood, sawlogs and sawn timber, Vibrations, shock and vibration measurements, Solar energy engineering, Paper and board, Measurement of force, weight and pressure, Reinforced plastics, Leather technology, Medical equipment, Rubber, Mining and quarrying, Wood technology processes, Iron and steel products, Glass, Plastics, Aerospace fluid systems and components, Gears, Mechanical testing, Refractories, Kitchen equipment, Materials for the reinforcement of composites, Elements of buildings, Products of the textile industry, Materials for aerospace construction, Adhesives, Piezoelectric and dielectric devices, Structures of buildings, Cork and cork products, Inorganic chemicals, Powder metallurgy, Semiconducting materials, Non-ferrous metals, Protection of and in buildings, Technical drawings, Products of the chemical industry, Seals, glands, Rubber and plastics products, Paints and varnishes, Electromechanical components for electronic and telecommunications equipment, Insulation, Fibre optic communications, Road vehicle systems, Testing of metals, Insulating materials, Aerospace electric equipment and systems, Miscellaneous domestic and commercial equipment, Integrated circuits. Microelectronics, Earthworks. Excavations. Foundation construction. Underground works.

RO-ASRO, Flexural modulus and flexural strength

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 9966-1974 HARDBOARD Determination of static bending slrength
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
STAS 12824-1990 SHAPED REFRACTORY PRODUCTS Strength determination at thermal shock-bending
STAS 11175-1978 Refractory mortars with chemical bindings DETERMINATION OF FRACTURE STRENGTH AT JOINT BENDING
STAS 6084-1985 FINISHED LEATHERS Strength determination at repeated flexion of leather and coating
STAS 7157-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at static bending
STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending

European Committee for Standardization (CEN), Flexural modulus and flexural strength

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN ISO 11984:1999 Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage ISO 11984: 1999
EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions (Incorporates Amendment A1: 2013)
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 10268:1998 Cold-Rolled Flat Products Made of High Yield Strength Micro-Alloyed Steels for Cold Forming - General Delivery Conditions Ratified European Text

Danish Standards Foundation, Flexural modulus and flexural strength

DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
DS/EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
DS/EN 12390-5:2013 Testing hardened concrete - Part 5: Flexural strength of test specimens
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork

British Standards Institution (BSI), Flexural modulus and flexural strength

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 4604:2011 Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
BS EN 12390-5:2009 Testing hardened concrete Part 5: Flexural strength of test specimens
BS EN 12390-5:2019 Tracked Changes. Testing hardened concrete. Flexural strength of test specimens
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
BS EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method
BS EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method
BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
BS EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions

German Institute for Standardization, Flexural modulus and flexural strength

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 538:1994-11 Clay roofing tiles for discontinuous laying - Flexural strength test; German version EN 538:1994
DIN EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN 53121:1996 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12390-5:2019-10 Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2019
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
DIN EN 14651:2007-12 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007

Lithuanian Standards Office , Flexural modulus and flexural strength

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
LST EN 538-2000 Clay roofing tiles for discontinuous laying - Flexural strength test
LST EN 12390-5-2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load

Indonesia Standards, Flexural modulus and flexural strength

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI 12-0565-1989 Bending strength test of shoes
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI 04-0683-1989 Low voltage ceramic insulators, Body mass bending and impact strength

AENOR, Flexural modulus and flexural strength

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE
UNE-EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE 56537:1979 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST STATIC FLEXION.
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load

Association Francaise de Normalisation, Flexural modulus and flexural strength

NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN 14771:2012 Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
NF B51-008:1987 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF ISO 4666-4:2018 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 4 : flexomètre à contrainte constante
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF EN ISO 10545-4:2019 Carreaux et dalles céramiques - Partie 4 : détermination de la résistance à la flexion et de la force de rupture
NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
NF EN 12384:1999 Cuivre et alliages de cuivre - Détermination de la limite élastique en flexion de bande.
NF ISO 4666-3:2023 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 3 : flexomètre à compression (type à déformation constante)
NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
NF P18-430-5:2012 Testing hardened concrete - Part 5 : flexural strength of test specimens.
NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.
NF E04-707-3:1994 Mechanical pencils. Part 3 : black leads. Bending strengths of hb leads.
NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
NF ISO 2493-2:2020 Papier et carton - Détermination de la résistance à la flexion - Partie 2 : rigidimètre Taber
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF P61-611-3*NF EN 12808-3:2009 Grouts for tiles - Part 3 : determination of flexural and compressive strength
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass

未注明发布机构, Flexural modulus and flexural strength

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength

AT-ON, Flexural modulus and flexural strength

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells
ONORM B 4650 Teil.5-1980 Steel structures; buckling of circular cylindrical Shells with gradually varying thickness
OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load

CZ-CSN, Flexural modulus and flexural strength

CSN ON 49 0193-1967 Bending strenght
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 49 0117-1979 Wood. Impact strength in flexure
CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
CSN 49 0115-1979 Wood. Determination of ultimate strength in flexure tests
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 73 1353-1976 Determiiiation of tensilo and flexui al strengths of cellular concreto
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests

International Organization for Standardization (ISO), Flexural modulus and flexural strength

ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 3348:1975 Wood; Determination of impact bending strength
ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
ISO 4604:2011 Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 15108:1998 Adhesives - Determination of strength of bonded joints using a bending-shear method
ISO 9177-3:1994 Mechanical pencils - Part 3: Black leads - Bending strengths of HB leads
ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ISO 11984:1999 Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

Korean Agency for Technology and Standards (KATS), Flexural modulus and flexural strength

KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS F 2208-2004 Method of bending test for wood
KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS F 2150-2004 Method of static bending test for full sized structural lumber
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS D 0259-2012(2022) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS G ISO 9177-3:2002 Mechanical pencils-Part 3:Black leads-Bending strengths of HB leads
KS M ISO 15108:2009 Adhesives－Determination of strength of bonded joints using a bending-shear method
KS F 2232-2016 Testing method for bending strength of polystyrene composite wood wool cement boards
KS G ISO 9177-3:2014 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS G ISO 9177-3:2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS B ISO 11984:2014 Ophthalmic optics — Contact lenses — Determination of rigid lens flexure and breakage
KS B ISO 11984:2005 Ophthalmic optics-Contact lenses-Determination of rigid lens flexure and breakage
KS M ISO 15108-2009(2019) Adhesives－Determination of strength of bonded joints using a bending-shear method
KS A ISO 9177-3:2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017(2022) Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flexural modulus and flexural strength

GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 14230-1993 Standard of test methed for bending load capacity of gears
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
GB/T 4741-1999 Standard test method for bending strength of ceramic materials
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 39011.3-2020 Mechanical pencils for technical drawings-Part 3: Black leads-Bending strengths of HB leads
GB/T 39542.3-2020 Mechanical pencils for technical drawings—Part 3:Black leads—Bending strengths of HB leads
GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness

Standard Association of Australia （SAA）, Flexural modulus and flexural strength

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength

(U.S.) Ford Automotive Standards, Flexural modulus and flexural strength

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD
FORD FLTM BS 105-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM BS 105-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS

RU-GOST R, Flexural modulus and flexural strength

GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 26798.2-1996 I-G and I-H well cement. Test methods
GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST 30003-1993 Metals. Cylindrial bending test of sheets and strips less than 2,5 mm thick
GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST ISO 3378-2014 Leather. Determination of resistance to cracking to grain layer of Flexural and tensile strength of the grain layer

国家市场监督管理总局、中国国家标准化管理委员会, Flexural modulus and flexural strength

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity

AASHTO - American Association of State Highway and Transportation Officials, Flexural modulus and flexural strength

DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

GM North America, Flexural modulus and flexural strength

GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus
GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GM GMP.PBTP+PETP.002-2001 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 6150 MPa Flexural Modulus
GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.048-1993 Polyolefin Alloy - 925 MPa Flexural Modulus, Injection Molding Grade, Black
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.PU.021-1999 Polyurea RRIM - High Heat, 20% Calcium Silicate (9986021), 1625 MPA Flexural Modulus
GM GMP.E/P.041-1990 Polyolefin Alloy - 35% Mineral Filled, 700 MPa Flexural Modulus, Black
GM GMP.E/P.062-1996 Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.063-1996 Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GMP.EEBC.019-2005 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 49, 250 MPa Flexural Modulus
GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003
GM GMP.E/P.014-1992 Polyolefin Alloy - Weather Resistant, 18% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.045-1992 Polyolefin Alloy - Weather Resistant, 320 MPa Flexural Modulus, Extrusion Grade, Black
GM GMP.E/P.050-1995 Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.056-1993 Polyolefin Alloy - Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus
GM GMP.E/P.076-2004 Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.121-2003 Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow
GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
GM GMP.E/P.051-1997 Polyolefin Alloy - Weatherable, 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE

Japanese Industrial Standards Committee (JISC), Flexural modulus and flexural strength

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
JIS B 1759:2013 Estimation of tooth bending strength of cylindrical plastic gears
JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
JIS H 0611:1994 Methods of measurement of thickness, thickness variation and bow for silicon wafer
JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure

SE-SIS, Flexural modulus and flexural strength

SIS SS 83 10 16-1989 Gutters - Determination of bending strength
SIS 23 51 06-1964 Fibre building boards. Determination of bending strength
SIS SS 13 73 08-1982 Autoclaved aerated concrete - Determination of bending strength

Taiwan Provincial Standard of the People's Republic of China, Flexural modulus and flexural strength

CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 12701-1990 Method of Test for Flexural Strength ( Modulus of Rupture ) of High Performance Ceramics
CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 13177-1993 Method of Test for Compressive Strength of Polyester Resin Concrete Using Portions of Beams Broken in Flexure

Group Standards of the People's Republic of China, Flexural modulus and flexural strength

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
T/SSEA 0069-2020 Measuring method of bending degree of bar

American Society for Testing and Materials (ASTM), Flexural modulus and flexural strength

ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D8388/D8388M-22 Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ESDU - Engineering Sciences Data Unit, Flexural modulus and flexural strength

ESDU 71027 A-2013 Endurance of high strength steels (in bending)
ESDU 71027 A-1974 Endurance of high strength steels (in bending).
ESDU 90002 C-2001 Struts: strength under flexural@ local and inter-rivet buckling.
ESDU 90002 B-1994 STRUTS: STRENGTH UNDER FLEXURAL@ LOCAL AND INTER-RIVET BUCKLING
ESDU 81007-1981 Fatigue strength in bending of steel I-beams with welded attachments.
ESDU 81007-2013 Fatigue strength in bending of steel I-beams with welded attachments
ESDU 85004-1985 Fatigue strength of steel stud threads under axial and combined axial and bending loading.
ESDU 78023 A-2013 Fatigue strength of transverse fillet welded joints and attachments in steels under bending loading
ESDU 78023 A-1982 Fatigue strength of transverse welded joints and attachments in steels under bending loading.

NZ-SNZ, Flexural modulus and flexural strength

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

TR-TSE, Flexural modulus and flexural strength

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2477-1976 Wood - Determination of Impact Bending Strength
TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE

Professional Standard - Chemical Industry, Flexural modulus and flexural strength

HG/T 3844-2008 Ebonite.Determination of cross breaking strength

Society of Automotive Engineers (SAE), Flexural modulus and flexural strength

SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
SAE AIR1418A-1980 Flexure Fatigue Strength of Tube Fitting Joints R(2001)
SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AMS3372A-1988 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3372B-2012 Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure
SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates
SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength

BE-NBN, Flexural modulus and flexural strength

NBN-EN 310-1994

Professional Standard - Automobile, Flexural modulus and flexural strength

QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

PL-PKN, Flexural modulus and flexural strength

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne

IPC - Association Connecting Electronics Industries, Flexural modulus and flexural strength

IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)
IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)

Professional Standard - Building Materials, Flexural modulus and flexural strength

JC/T 676-1997 Test method for flexure of glass material
JC/T 263-1993 Performance test method for cast stone products. Bending strength test

ZA-SANS, Flexural modulus and flexural strength

SANS 6112:1988 Bending modulus of steel shanks for footwear
SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete
SANS 9177-3:2009 Mechanical pencils Part 3: Black leads - Bending strengths of HB leads

工业和信息化部, Flexural modulus and flexural strength

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
YD/T 2964-2015 Measurement method for bend loss insensitive single-mode optical fiber for access network
JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature

American Gear Manufacturers Association, Flexural modulus and flexural strength

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
AGMA 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth

AGMA - American Gear Manufacturers Association, Flexural modulus and flexural strength

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
P229.24-1982 Improvement in the Conventional Analysis of Gear Tooth Bending Fatigue Strength
91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Flexural modulus and flexural strength

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

VN-TCVN, Flexural modulus and flexural strength

TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
TCVN 4032-1985 Cements.Test methods of bending and compression strengths
TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength

IN-BIS, Flexural modulus and flexural strength

US-FCR, Flexural modulus and flexural strength

FCR COE HL-92-9 FINAL REPORT-1992 DEPTH-AVERAGED NUMERICAL MODELING FOR CURVED CHANNELS

ES-UNE, Flexural modulus and flexural strength

UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
UNE-EN 12390-5:2020 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load

Professional Standard - Aerospace, Flexural modulus and flexural strength

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

API - American Petroleum Institute, Flexural modulus and flexural strength

API BULL 5C4-1987 Bulletin on Round Thread Casing Joint Strength with Combined Internal Pressure and Bending
API BULL 5C4-1972 BULLETIN ON ROUND THREAD CASING JOINT STRENGTH WITH COMBINED INTERNAL PRESSURE AND BENDING FIRST EDITION

Professional Standard - Aviation, Flexural modulus and flexural strength

HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth
HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
HB/Z 84.3-1984 Bending Fatigue Strength Calculation of Aviation Involute Cylindrical Gear Teeth
HB 5295-1984 Kiscc test method for cantilever-bending pre-cracked specimens of high-strength alloys

TH-TISI, Flexural modulus and flexural strength

TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates

KR-KS, Flexural modulus and flexural strength

KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS A ISO 9177-3-2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure

Professional Standard - Light Industry, Flexural modulus and flexural strength

QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes

SAE - SAE International, Flexural modulus and flexural strength

SAE J2613-2017 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)

YU-JUS, Flexural modulus and flexural strength

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending
JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing

Professional Standard - Machinery, Flexural modulus and flexural strength

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

Professional Standard - Medicine, Flexural modulus and flexural strength

YY/T 0342-2002 Implants for surgery----Determination of bending strength and stiffness of bone plates

国家药监局, Flexural modulus and flexural strength

YY/T 0342-2020 Implants for surgery----Determination of bending strength and stiffness of bone plates

ES-AENOR, Flexural modulus and flexural strength

HU-MSZT, Flexural modulus and flexural strength

GM Global, Flexural modulus and flexural strength

GMW 16826-2013 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow, Low Density Issue 2; English
GMW 15187-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow Issue 2; English
GMW 15185-2013 Polyolefin Alloy - 1000 MPa Flexural Modulus, High Flow Issue 2; English
GMW 16827-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, Weather Resistant, High Flow, Low Density Issue 1; English

CEN - European Committee for Standardization, Flexural modulus and flexural strength

PREN 12390-5-2017 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load
EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Guangdong Provincial Standard of the People's Republic of China, Flexural modulus and flexural strength

DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength

(U.S.) Telecommunications Industries Association , Flexural modulus and flexural strength

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

TIA - Telecommunications Industry Association, Flexural modulus and flexural strength

TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

NL-NEN, Flexural modulus and flexural strength

NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

European Association of Aerospace Industries, Flexural modulus and flexural strength

AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flexural modulus and flexural strength

GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength

National Aeronautics and Space Administration (NASA), Flexural modulus and flexural strength

NASA NACA-RB-L4D29-1944 Some strength tests of stiffened curved sheets loaded in shear

The American Road & Transportation Builders Association, Flexural modulus and flexural strength

AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

International Electrotechnical Commission (IEC), Flexural modulus and flexural strength

IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results

PT-IPQ, Flexural modulus and flexural strength

NP EN 1170-4-2000 Precast concrete products. Test method for glass-fibre reinforced cement Part 4:Measuring bending strength,"Simplified bending test"method

Aerospace, Security and Defence Industries Association of Europe (ASD), Flexural modulus and flexural strength

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)