ZH
RU
ES

big push big

big push big, Total:312 items.

In the international standard classification, big push big involves: Space systems and operations, Fasteners for aerospace construction, Aerospace engines and propulsion systems, Shipbuilding and marine structures in general, Products of the chemical industry, Small craft, Cutting tools, Seagoing vessels, Elements of buildings, Microbiology, Chipless working equipment, Farming and forestry, Fasteners, Internal combustion engines for road vehicles, Road vehicle systems, Commercial vehicles, Test conditions and procedures in general, Special purpose vehicles, Animal feeding stuffs, Fuels, Iron and steel products, Hydraulic energy engineering, Veterinary medicine, Welding, brazing and soldering, Vocabularies, Rotating machinery, Adhesives, Milk and milk products, Resistors, Capacitors, Kitchen equipment, Materials for aerospace construction, Fertilizers, Valves, Corrosion of metals, Buildings, Production in the chemical industry, Fluid storage devices, Earth-moving machinery, Internal combustion engines, General methods of tests and analysis for food products, Air quality, Aerosol containers, Insulation, Products of the textile industry, Plastics, Food products in general, Surface treatment and coating, Materials and components for railway engineering, Software development and system documentation, Galvanic cells and batteries, Power transmission and distribution networks, On-board equipment and instruments, Installations in buildings, Water quality, Integrated circuits. Microelectronics, Biology. Botany. Zoology, Company organization and management, Processes in the food industry, Geology. Meteorology. Hydrology.

AGMA - American Gear Manufacturers Association, big push big

97FTM13-1997 Three Innovations Advance the Science of Shot Peening

U.S. Military Regulations and Norms, big push big

ARMY MIL-STD-652 D NOTICE 6-1990 PROPELLANTS, SOLID FOR CANNONS REQUIREMENTS AND PACKING
ARMY MIL-STD-652 D NOTICE 7-2013 Propellants, Solid, for Cannons Requirements and Packing
ARMY MIL-DTL-11589/611 VALID NOTICE 1-2013 Ribbon, North Atlantic Treaty Organization (NATO) Article 5 - Active Endeavour Medal

Society of Automotive Engineers (SAE), big push big

SAE MAP1753A-2001 Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment
SAE J2130-1-2021 Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1—Machines with a Gross Vehicle Mass Greater than 5000 kg
SAE J2473-2014 Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge
SAE J748-1957 Hydraulic Directional Control Valves, 3000 psi Maximum, Recommended Practice
SAE J1456-1995 Maximum Allowable Rotational Speed for Internal Combustion Engine Flywheels, Recommended Practice
SAE J1407-1995 Vehicle Electromagnetic Radiated Susceptibility Testing Using a LargeTEM Cell
SAE J1292-1981 Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring, Recommended Practice October 1981

British Standards Institution (BSI), big push big

BS ISO 484-1:2015 Shipbuilding. Ship screw propellers. Manufacturing tolerances. Propellers of diameter greater than 2,50 m
BS EN 13938-4:2003 Explosives for civil uses - Propellants and rocket propellants - Determination of burning rate under ambient conditions
BS ISO 14885:2014 Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements
BS 5695:1980 Recommendations for maximum case dimensions for capacitors and resistors
BS 4086:1966 Recommendations for maximum surface temperatures of heated domestic equipment
BS EN 334:2005 Gas pressure regulators for inlet pressures up to 100 bar
BS EN ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
BS EN ISO 11592-1:2016 Tracked Changes. Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull less than 8 m
BS EN 16086-1:2011 Soil improvers and growing media. Determination of plant response. Pot growth test with Chinese cabbage
BS EN ISO 11592-2:2021 Tracked Changes. Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull between 8 m and 24 m
BS 6448:1995 Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
BS EN ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
BS ISO 11866-2:2006 Milk and milk products - Enumeration of presumptive Escherichia coli - Colony-count technique at 44 C using membranes
BS EN ISO 9308-1:2014 Water quality. Enumeration of Escherichia coli and coliform bacteria. Membrane filtration method for waters with low bacterial background flora
BS 5551-2.6:1992 Fertilizers. Sampling. Guide to derivation of a sampling plan for the evalution of a large delivery of solid fertilizer

Association Francaise de Normalisation, big push big

NF J95-039:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power.
NF T70-938-4*NF EN 13938-4:2004 Explosives for civil uses - Propellants and rocket propellants - Part 4 : determination of burning rate under ambient conditions.
NF J95-903*NF ISO 14885:2014 Large Yachts - Diesel engines for main propulsion and essential auxiliaries - Safety requirements
NF EN ISO 11592-1:2016 Petits navires - Détermination de la puissance maximale de propulsion en utilisant la vitesse de manoeuvre - Partie 1 : Navires d'une longueur de coque de moins de 8 m
NF ISO 14885:2014 Grands yachts - Moteurs diesel pour la propulsion principale et les moteurs auxiliaires essentiels - Exigences de sécurité
NF V08-020:1994 Microbiology. General guidance for enumeration of presumptive {Escherichia} {coli}. Most probable number technique.
NF V04-019:1997 Milk and milk products. Enumeration of presumptive Escherichia coli. Part 1 : most probable number technique.
NF J95-069-1*NF EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
NF EN ISO 11592-2:2021 Petits navires - Détermination de la puissance maximale de propulsion en utilisant la vitesse de manoeuvre - Partie 2 : bateaux d'une longueur de coque comprise entre 8 m et 24 m
NF V04-019-2*NF ISO 11866-2:2006 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2 : colony-count technique at 44 oC using membranes
NF G38-116:1996 Geotextiles. Tensile test for joints/seams by wide/width method.
NF A35-502:1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions.
NF J95-069-2*NF EN ISO 11592-2:2021 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2 : craft with a length of hull between 8 m and 24 m
NF EN ISO 12217-1:2017 Petits navires - Évaluation et catégorisation de la stabilité et de la flottabilité - Partie 1 : bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m
NF P45-200*NF EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
NF G00-003/A1*NF EN ISO 139/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1
NF M50-005-2*NF EN 12007-2:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2 : specific functional requirements for polyethylene (MOP up to and including 10 bar)
NF ISO 7251:2005 Microbiologie des aliments - Méthode horizontale pour le dénombrement d'Escherichia coli présumés - Technique du nombre le plus probable
NF V08-106:2002 Enumeration of presumptive Escherichia coli in live shellfish - Indirect technique using direct impedance measurement.
NF V08-106:2010 Enumeration Escherichia coli in live shellfish - Indirect technique using direct impedance measurement

German Institute for Standardization, big push big

DIN EN 13938-4:2004 Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions; German version EN 13938-4:2003
DIN EN ISO 11592-1:2016-07 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016); German version EN ISO 11592-1:2016
DIN EN ISO 11592:2002 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001); German version EN ISO 11592:2001
DIN EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007
DIN EN 15483:2009-02 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy; German version EN 15483:2008
DIN EN ISO 6647-2:2020-11 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020); German version EN ISO 6647-2:2020
DIN EN ISO 11592-2:2022-01 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021); German version EN ISO 11592-2:2021

HU-MSZT, big push big

Taiwan Provincial Standard of the People's Republic of China, big push big

CNS 221-1991 Large Morse Taper Shank Drills
CNS 5324-1980 Kingpin Thrust Ball Bearing for Automobiles
CNS 7679-1989 Inlet Type Ventilators for Buses

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, big push big

GB/T 18822-2002 Small craft less than 8m length of hull--Determination of maximum propulsion power rating
GB/T 12555.6-1990 Injection mould for plastic large-size mould bases--Ejector plates
GB/T 12555.12-1990 Injection mould for plastic large-size mould bases--Guide bushes with head
GB/T 12555.10-1990 Injection mould for plastic large-size mould bases--Guide pins for ejector plater
GB/T 28572-2012 Series of large and medium inletvalves of hydraulic rurbine
GB/T 14478-2012 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T 39499-2020 Technical guideline for derivation of health protection zone about fugitive emission of atmospheric harmful substances
GB/T 12372-1990 Standard method for examination of nitrogen dioxide in air of residential areas--Modified Saltzman method
GB/T 22543.1-2008 Instrument for dam monitoring.Extension line gauge.Part 1:Step motor type extension line gauge

Korean Agency for Technology and Standards (KATS), big push big

KS V ISO 11592-2006(2021) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS V ISO 11592-2006(2016) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS R 4033-1978(2011) INLET TYPE VENTILATORS FOR BUSES
KS A 0006-2014(2019) Standard atmospheric conditions for testing
KS H ISO 11866-1-2006(2016) Milk and milk products－Enumeration of presumptive Escherichia coli－Part 1：Most probable number technique
KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
KS M 3733-2015 General recommended practices for atmospheric exposure of adhesive bonds
KS H ISO 11866-1:2006 Milk and milk products－Enumeration of presumptive Escherichia coli－Part 1：Most probable number technique
KS M ISO 5307:2006 Solid fertilizers-Derivation of a sampling plan for the evaluation of a large delivery
KS M ISO 5307:2013 Solid fertilizers－Derivation of a sampling plan for the evaluation of a large delivery
KS F 1510-2012(2017) Recommended modular coordinating dimension for the sizing of building components
KS M ISO 5307-2006(2011) Solid fertilizers－Derivation of a sampling plan for the evaluation of a large delivery
KS V ISO 11592-1:2022 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m
KS J ISO 7251-2007(2012) Microbiology of food and animal feeding stuffs－Horizontal method for the detection and enumeration of presumptive Escherichia coli －Most probable number technique
KS J ISO 7251-2007(2021) Microbiology of food and animal feeding stuffs－Horizontal method for the detection and enumeration of presumptive Escherichia coli －Most probable number technique
KS H ISO 11866-1:2021 Milk and milk products — Enumeration of presumptive Escherichia coli — Part1: Most probable number technique
KS H ISO 11866-2-2006(2016) Milk and milk products－Enumeration of presumptive Escherichia coli－Part 2：Most probable number technique using 4-methylumbelliferyl-b-D-glucuronide(MUG)

International Organization for Standardization (ISO), big push big

ISO 14885:2014 Large yachts - Diesel engines for main propulsion and essential auxiliaries - Safety requirements
ISO 3811:1979 Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method)
ISO 4952:2006 Structural steels with improved atmospheric corrosion resistance
ISO 4952:2003 Structural steels with improved atmospheric corrosion resistance
ISO 4952:1981 Structural steels with improved atmospheric corrosion resistance
ISO 11866-1:2005 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 1: Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG)
ISO 11866-2:1997 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG)
ISO 11866-1:2005|IDF 170-1:2005 Colony enumeration of putative Escherichia coli in milk and milk products Part 1: Maximum likelihood technique using 4-methylgalacto-(β)-D-glucuronide (MUG) (test)
ISO 11866-1:1997 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 1: Most probable number technique
ISO 9308-1:1990 Water quality; detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli; part 1: membrane filtration method
ISO/TR 5307:1991 Solid fertilizers; derivation of a sampling plan for the evaluation of a large delivery
ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
ISO 11866-3:1997 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 3: Colony-count technique at 44 °C using membranes
ISO 11866-2:2005|IDF 170-2:2005 Milk and milk products — Enumeration of presumptive Escherichia coli — Part 2: Colony-count technique at 44 degrees C using membranes
ISO 11866-2:2005 Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 °C using membranes
ISO 11592-2:2021 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m
ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 9308-1:2014 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora

Professional Standard - Construction Industry, big push big

JG/T 155-2014 Electric swing or sliding gate
JG/T 155-2003 Electric swing or sliding gate

Professional Standard - Commodity Inspection, big push big

SN/T 1849-2006 Rules for the quarantine of import soybean
SN/T 0169-2010 Determination of coliform,fecal coliform and Escherichia coli in food for import and export
SN/T 1059.2-2002 Total coliform and escherichia coli counts in food for import and export.Membrane filter/MUG method
SN/T 1607-2005 Total bacterial count,coliform,fecal coliform and Escherichia coli counts in drink for import and export--Hydrophobic grid membrane filtration mtehod
SN/T 2088-2008 Rules for inspection and quarantine of import wheat and barly
SN/T 1670-2005 Protocol of quarantine and supervision for imported livestock in isolation station
SN/T 2295-2009 Quarantine procedure for import and export livestock on the spot
SN/T 2858-2011 Protocol of quarantine treatment for notificable disease of entry and exit animal
SN/T 1932.5-2008 Rules for inspection on import and export garment.Part 5:Suits and coats
SN/T 1827-2006 Determination of shiga toxin-producing Escherichia coli in foods for import and export
SN/T 1048-2002 Cereals and feedstuffs for import and export -Identification for barley variety.Method of protein electrophoresis
SN/T 1059.4-2005 Inspection of Escherichia coli in food for import and export - Glutamate decarboxylase assay
SN/T 1059.3-2005 Glutamic acid decarboxylase method for the detection of Escherichia coli in imported and exported food
SN/T 0973-2000 Method for the determination of entero-hemorrhagic E.coli O157:H7 in meats and meat products for import and export and export

Japanese Industrial Standards Committee (JISC), big push big

JIS F 1036:2003 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating
JIS K 6860:1974 General recommended practices for atmospheric exposure of adhesive bonds
JIS K 7100:1981 Standard atmospheres for conditioning and testing of plastics

Danish Standards Foundation, big push big

DS/EN ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
DS/ISO 11592-2:2021 Small craft – Determination of maximum propulsion power rating using manoeuvring speed – Part 2: Craft with a length of hull between 8 m and 24 m
DS/EN 10155:1994 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
DS/EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
DS/EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

ZA-SANS, big push big

SANS 11592:2008 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
SANS 7251:2005 Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of presumptive Escherichia coli - Most probable number technique

NO-SN, big push big

NS 4792-1990 Water analysis - Thermotolerant coliform bacteria and presumptive E.coli - Membrane filter method

国家质量监督检验检疫总局, big push big

SN/T 4552-2016 Entry and Exit Garlic Quarantine Regulations
SN/T 4645-2016 Imported soybean quality inspection methods
SN/T 4656.3-2016 Biosafety Inspection Methods for Imported and Exported Textiles Part 3: Coliforms

RU-GOST R, big push big

GOST R 50454-1992 Meat and meat products. Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli (Reference method)
GOST R 41.85-1999 Uniform provisions concerning the approval of internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of the net power and the maximum 30 minutes power of elec

Aerospace Industries Association/ANSI Aerospace Standards, big push big

AIA/NAS NASM63540/7-2000 Stud, Self-Locking, Broaching Type

AIAG - Automotive Industry Action Group, big push big

TC-2-1998 Information Kit for Importing into Canada
TC-2-2003 Information Kit for Importing into Canada (Version 3)

Professional Standard - Agriculture, big push big

10兽药质量标准汇编(2012年)-2013 Imported veterinary drug spectinomycin sulfate
农业部公告第1772号 Imported veterinary drug: spectinomycin sulfate
10兽药质量标准汇编(2006至2011年)-2012 Imported Veterinary Drug Standard Spectinomycin Sulfate
SN/T 0114-1992 Rules for the inspection of imported Australian raw sheepskins and lambskins
SC/T 1166-2022 Technical specifications for land-based push-water containerized aquaculture for largemouth bass

National Metrological Verification Regulations of the People's Republic of China, big push big

JJG(航天) 43-1987 Verification regulations for high thrust electric vibration table

RO-ASRO, big push big

STAS SR 13178-2-1994 Animal feeding stuffs. Bacteriological examination. Determination of most probable number of presumptive coliform bacteria and presumptive Escherichia coli
STAS 9682/4-1974 Stimulant foods TEA Sampling from large containers
STAS 8921-1971 Testing of metals DRIFT EXPANDING TEST ON COPPER AND COPPER ALLOY TUBES

PL-PKN, big push big

PN K91201-1992 Coaches Sliding p?ug entrance doors Rpniiirements
PN K91203-1992 Coaches E?uipments for blocking the entrance door Re?uirements

SE-SIS, big push big

SIS SS 78 20 39-1983 Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of dia- meter greater than 2,50 m

Standard Association of Australia （SAA）, big push big

AS/NZS 5601.2:2013
AS/NZS 5601.2:2020 Gas installations, Part 2: LP Gas installations in caravans and boats for non-propulsive purposes
MP 88-2000 Evolution of Australian Standard for pressure vessel steel plate
AS 5013.15:2006 Food microbiology - Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of presumptive Escherichia coli - Most probable number technique

IN-BIS, big push big

Underwriters Laboratories (UL), big push big

UL SUBJECT 3456-2014 UL Outline of Investigation for Electric-Battery-Powered Carts For Commercial (Issue 10)
UL SUBJECT 327A-2008 OUTLINE OF INVESTIGATION FOR INFERENTIAL TYPE RESIDENTIAL WATER FLOW METERS (Issue 3)
UL 3456 BULLETIN-2009 UL Standard for Safety Outline of Investigation for Electric-Battery-Powered Carts for Commercial Use
UL SUBJECT 3456-2009 OUTLINE OF INVESTIGATION FOR ELECTRIC-BATTERY-POWERED CARTS FOR COMMERCIAL USE (Issue Number: 2)
UL SUBJECT 3456-2010 SUBJECT 3456 OUTLINE OF INVESTIGATION FOR ELECTRIC-BATTERY-POWERED CARTS FOR COMMERCIAL USE ISSUE NO: 8
UL SUBJECT 327A-2006 OUTLINE OF INVESTIGATION FOR INFERENTIAL TYPE RESIDENTIAL WATER FLOW METERS (Issue Number: 1)
UL SUBJECT 327A-2007 OUTLINE OF INVESTIGATION FOR INFERENTIAL TYPE RESIDENTIAL WATER FLOW METERS (Issue Number: 2)
UL SUBJECT 2428-2003 OUTLINE OF INVESTIGATION FOR TEMPORARY PANELBOARD INGRESS BARRIERS (Issue Number: 1)
UL SUBJECT 2428-2008 OUTLINE OF INVESTIGATION FOR TEMPORARY PANELBOARD INGRESS BARRIERS ISSUE NO. 2
UL SUBJECT 8203-2017 UL Outline for Investigation Performance Testing for Ingress of Fibrous Indoor Dust (Issue 1)

Lithuanian Standards Office , big push big

LST EN ISO 11592:2002 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001)
LST EN 15483-2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy

NZ-NZS, big push big

NZS 5428:1996

Professional Standard - Machinery, big push big

JB/T 9576-2000 Series of large and medium inlet valves of hydraulic turbine
JB/T 8814-1998 Big power bulldozer.Water-cooled type hydraulic fluid cooler.Technical specifications
JB/T 8814-2010 Big power dozers-Water-cooled type hydraulic oil cooler-Technical specification
JB/T 11878-2014 Reciprocating high power internal combustion engines.Intake and exhaust valves.Specification
JB/T 12663-2016 Medium/high-power gas engines.Specifications for air inlet pipe explosion-proof safety valve

海关总署, big push big

SN/T 2088-2022 Inspection and quarantine regulations for imported wheat and barley
SN/T 0800.10-2019 Testing methods for water absorption of imported and exported grain and feed soybean flour

Sichuan Provincial Standard of the People's Republic of China, big push big

DB51/T 1710.11-2013 Giant Panda Quarantine Technology—Requirements for the Construction of Designated Isolation Fields for Imported and Exited Giant Pandas

KR-KS, big push big

KS I ISO 9308-1-2010 Water quality－Detection and enumeration of Escherichia coli and coliform bacteria－Part 1：Membrane filtration method
KS I ISO 9308-2-2010 Water quality－Detection and enumeration of coliform organisms,thermotolerant coliform organisms and presumptive Escherichia coli－Part 2：Multiple tube(most probable number) method
KS V ISO 11592-1-2022 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m
KS H ISO 11866-1-2021 Milk and milk products — Enumeration of presumptive Escherichia coli — Part1: Most probable number technique

Defense Logistics Agency, big push big

DLA MS16632 REV B-1990 RING, RETAINING, EXTERNAL, CRESCENT (REDUCED SECTION TYPE)
DLA SMD-5962-95552 REV D-2003 MICROCIRCUIT, LINEAR, ADVANCED RAIL-TO-RAIL DUAL OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

FI-SFS, big push big

SFS 5325-1987

Group Standards of the People's Republic of China, big push big

T/CWAN 0093-2023 Recommended process specification for hard surfacing welding of large wear-resistant parts
T/HZAS 28-2022 Specifications for inspection records of food purchases by sponsors of large-scale sports events
T/CWAN 0061-2022 Recommended process specification for narrow gap laser wire filling welding of large thickness high-strength steel
T/CWAN 0059-2021 Recommended process specification for narrow-gap laser welding with filler wire of large thickness titanium alloy
T/CWAN 0060-2022 Recommended process specification for narrow-gap laser welding with filler wire of large thickness aluminum alloy
T/SCTA 011-2020 Big data platform of intelligent shield machine -Technical requirements for tunnel excavation management system
T/CQXMGYHCJH 001-2021 "Chongqing Small Noodles" group standard of Chongqing Dadukou District Small Noodle Industry Promotion Association

Canadian Standards Association (CSA), big push big

CSA PLUS 1172-2004 Wiring for Canadian Homes and Cottages A Guide to the CSA Canadian Electrical Code

VN-TCVN, big push big

TCVN 6505-1-2007 Milk and milk products.Enumeration of presumptive Escherichia coli.Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)
TCVN 6505-2-2007 Milk and milk products.Enumeration of presumptive Escherichia coli.Part 2: Colony-count technique at 44 degrees C using membranes
TCVN 6521-1999 Structural steels with improved atmospheric corrosion resistance
TCVN 6846-2007 Microbiology of food and animal feeding stuffs.Horizontal method for the detection and enumeration of presumptive Escherichia coli.Most probable number technique
TCVN 5139-2008 Recommended methods of sampling for the determination of pesticide residues for compliance with MRLs

European Committee for Standardization (CEN), big push big

prEN 29308-2-1992 Water quality; detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli; part 2: multiple tube (most probable number) method (ISO 9308-2:1990)
EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
prEN 29308-1-1992 Water quality; detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli; part 1: membrane filtration method (ISO 9308-1:1990)
EN 12007-2:2000 Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 2: Specific Functional Recommendations for Polyethylene (MOP up to and Including 10 Bar)
prEN ISO 11592-2:2020 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO/FDIS 11592-2:2020)
EN 10155:1993 Structural Steels with Improved Atmospheric Corrosion Resistance - Technical Delivery Conditions

Guangdong Provincial Standard of the People's Republic of China, big push big

DB4404/T 11-2021 Regulations for entering and evacuating government service halls
DB4404/T 12-2021 Arranging and standardizing the entry matters of the government service hall

Hebei Provincial Standard of the People's Republic of China, big push big

DB13/T 393-1998 Rules for quality inspection of imported malting barley

National Metrological Technical Specifications of the People's Republic of China, big push big

JJF 1554-2015 Type evaluation outline of precession vortex flowmeter

North Atlantic Treaty Organization Standards Agency, big push big

STANAG 4568-2000 PROCEDURES TO DETERMINE THE LEVELS OF PERFORMANCE (MUZZLE VELOCITY, PRESSURE) AND ASSOCIATED QUALITY OF IN-SERVICE LARGE CALIBRE PROPELLING CHARGE LOTS

Institute of Electrical and Electronics Engineers (IEEE), big push big

IEEE Std 1310-1996 IEEE Trial use recommended practice for thermal cycle testing of form-wound stator bars and coils for large generators
RP 65:2000 RP 65:2000 - SMPTE Recommended Practice - Motion-Picture Enlargement/Reduction Ratios
IEEE Std 111-2000 IEEE Standard for Wide-Band (Greater Than 1 Decade) Transformers
IEEE 433-2009 Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE Std 1115-2000 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
IEEE Std 1115-1992 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
IEEE P485/D2, October 2016 IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE Unapproved Draft Std P485/D5, May 2008 IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE 1770-2021 IEEE Recommended Practice for the Usage of Terms Commonly Employed in the Field of Large-Signal Vector Network Analysis
IEEE P485/D6, February 2020 IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE P485/D10, May 2010 IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
IEEE Std 1115-2014 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications - Redline
IEEE Std 1770-2021 IEEE Recommended Practice for the Usage of Terms Commonly Employed in the Field of Large-Signal Vector Network Analysis
IEEE 485-1983 Recommended practice for sizing large lead storage batteries for generating stations and substations
ANSI/IEEE Std 95-1977 IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage
IEEE 1515-2000 Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
IEEE Std 485-1983 IEEE Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and Substations
IEEE P1770/D2, January 2021 IEEE Draft Recommended Practice for The Usage of Terms Commonly Employed In the Field of Large-Signal Vector Network Analysis
IEEE 450-1995 Recommended practice for maintenance, testing and replacement of vented lead-acid batteries for stationary applications
IEEE 95-1977 Recommended practice for insulation testing of large ac rotating machinery with high direct voltage
IEEE Approved Std P1013/D10, Oct 2006 Approved IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
ANSI/IEEE Std 450-1975 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations

International Federation of Trucks and Engines, big push big

NAVISTAR ESP G-42.221-NR-2015 VOID - Truss Head Semi-Tubular Rivets - Not Recommended (Noun Code - 7220)

IPC - Association Connecting Electronics Industries, big push big

IPC TM-650 2.2.16-1987 Artwork Master Evaluation by Use of a Drilled Panel

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., big push big

IEEE 111-2000 Standard for Wide-Band (Greater Than 1 Decade) Transformers
IEEE 485-1978 Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and Substations
IEEE 484-1975 Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations
IEEE 450-1975 Recommended Practice for Maintenance@ Testing@ and Replacement of Large Lead Storage Batteries for Generating Stations and Substations
IEEE 484-1981 RECOMMENDED PRACTICE FOR INSTALLATION DESIGN AND INSTALLATION OF LARGE LEAD STORAGE BATTERIES FOR GENERATING STATIONS AND SUBSTATIONS
IEEE 450-1980 RECOMMENDED PRACTICE FOR MAINTENANCE@ TESTING@ AND REPLACEMENT OF LARGE LEAD STORAGE BATTERIES FOR GENERATING STATIONS AND SUBSTATIONS

ACI - American Concrete Institute, big push big

ACI SP-72-1981 Significant Developments in Engineering Practice and Research (Out of Print)

BR-ABNT, big push big

ABNT MB-1290-1979

Electronic Components, Assemblies and Materials Association, big push big

ECA 202-A-1964 Recommended Practice for Preparation of Outline Drawings of Electron Tubes and Bases

ESDU - Engineering Sciences Data Unit, big push big

ESDU 88025 C-1994 DERIVATION OF PRIMARY AIR-DATA PARAMETERS FOR HYPERSONIC FLIGHT
TM 185-2017 Technical Memorandum Air Data Calibration Using a GPS/INS (EGI)

American Society for Testing and Materials (ASTM), big push big

ASTM G50-76(1997)e1 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G50-20 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G91-11 Standard Practice for Monitoring Atmospheric SO₂ Deposition Rate for Atmospheric Corrosivity Evaluation
ASTM D6534-05 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM G116-99(2020)e1 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM G50-10(2015) Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G116-99(2015) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM G116-99(2010) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
ASTM E1373-92(1996) Standard Test Method for Conducting a Subchronic Inhalation Toxicity Study in Rats

International Truck and Engine Corporation (ITEC), big push big

INTERN ESP G-3.221-NPP-2000 Button Head Large Solid Rivets - Non Preferred Parts - (Noun Code 7220)

API - American Petroleum Institute, big push big

API STD 620 SUPP-1968 Recommended Rules for Design and Construction of Large@ Welded@ Low-pressure Storage Tanks
API 32-30236-1982 AN INHALATION TERATOLOGY STUDY IN RATS WITH MTBE
API STD 620-1978 Recommended Rules for Design and Construction of Large@ Welded Low-Pressure Storage Tanks (SIXTH EDITION)
API STD 620-1970 Recommended Rules for Design and Construction of Large@ Welded@ Low-pressure Storage Tanks (Fourth Edition)
API STD 620-1963 RECOMMENDED RULES FOR DESIGN AND CONSTRUCTION OF LARGE@ WELDED@ LOW-PRESSURE STORAGE TANKS (SECOND EDITION)
API PUBL 32-31048-1985 SERIAL SACRIFICE STUDY WITH UNLEADED GASOLINE IN RATS
API 28-31212-1980 AN INHALATION FEMALE FERTILITY STUDY WITH BENZENE IN RATS
API STD 620 SUPP-1965 RECOMMENDED RULES FOR DESIGN AND CONSTRUCTION OF LARGE@ WELDED@ LOW-PRESSURE STORAGE TANKS - SUPPLEMENT (Second Edition)
API RP 10B-5-2005 Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure (First Edition)
API 4029-1970 ATMOSPHERIC REACTION STUDIES IN THE LOS ANGELES BASIN PHASE II DATA ANALYSIS AND METHODS IMPROVEMENT

Professional Standard - Chemical Industry, big push big

HG 20234-1993 General Rules for Inspection of Imported Equipment and Materials for Chemical Industrial Construction Projects
HG 20234-1993（条文说明） Inspection outline of imported equipment and materials for chemical construction projects
HG/T 20234-1993 Inspection Outline for Imported Equipment and Materials in Chemical Construction Projects

SAE - SAE International, big push big

SAE J1113/4-1995 Immunity to Radiated Electric Fields - Bulk Current Injection (BCI) Method@ Recommended Practice
SAE J1407-1982 Vehicle Electromagnetic Radiated Susceptibility Testing Using A Large Tem Cell
SAE J1407-1988 Vehicle Electromagnetic Radiated Susceptibility Testing Using a Large TEM Cell@ Information Report;

IX-EU/EC, big push big

2002/41/EC-2002 Commission Directive Adapting to Technical Progress Directive 95/1/EC of the European Parliament and of the Council on the Maximum Design Speed, Maximum Torque and Maximum Net Engine Power of Two- or Three- Wheel Motor Vehicles
COM(1999) 299 FINAL-1999 Mutual Recognition in the Context of the Follow-Up to the Action Plan for the Single Market

ES-UNE, big push big

UNE-EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016)
UNE-EN ISO 11592-2:2022 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021)
UNE-EN ISO 6647-2:2021 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

AT-ON, big push big

ONORM EN 10155-1993 Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions
OENORM EN ISO 11592-2:2021 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO/FDIS 11592-2:2020)

IT-UNI, big push big

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., big push big

ASHRAE ST-16-015-2016 Improving Variable-Speed Pumping Control to Maximize Savings
ASHRAE TO-98-23-3-1998 Using Large Environmental Chamber Technique for Gaseous Contaminant Removal Equipment Test

US-FCR, big push big

FCR COE HL-90-16 FINAL REPORT-1990 INTAKE STRUCTURE OPERATION STUDY, ELK CREEK DAM, OREGON

IX-FAO, big push big

CAC/GL 33-1999(En) Recommended sampling methods for determination of compliance with maximum pesticide residue limits
CAC/GL 33-1999(Ch) Recommended sampling methods for determination of compliance with maximum pesticide residue limits
CAC/GL 33-1999 Recommended methods of sampling for the determination of pesticide residues for compliance with MRLs

NL-NEN, big push big

NEN-EN 10155-1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions

American Gear Manufacturers Association, big push big

AGMA 94FTM11-1994 Development of Transfer Gear Noise of 4X4 Transmission for Recreational Vehicles

National Aeronautics and Space Administration (NASA), big push big

NASA NACA-RM-A8F21-1948 An experimental investigation at large scale of several configurations of an NACA submerged air intake

AENOR, big push big

UNE 68043:1979 WHEELED AGRICULTURAL TRACTORS. CALCULATION OF THE VELOCITY OF ADVANCE. MAXIMUM.
UNE-EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy

American National Standards Institute （ANSI), big push big

ANSI/IEEE 1568:2003 Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles
ANSI/IEEE 1573:2003 Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance
ANSI/NSF 29(i3)-2009 Detergent and chemical feeders for commercial spray-type dishwashing machines
ANSI/NSF 29(i4)-2012 Detergent and chemical feeders for commercial spray-type dishwashing machines
ANSI/IEEE 1310:2004 Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators

IETF - Internet Engineering Task Force, big push big

RFC 8270-2017 Increase the Secure Shell Minimum Recommended Diffie-Hellman Modulus Size to 2048 Bits
RFC 3030-2000 SMTP Service Extensions for Transmission of Large and Binary MIME Messages

International Telecommunication Union (ITU), big push big

ITU-T G.763-1994 (WITHDRAWN) Digital Circuit Multiplication Equipment Using ADPCM (Recommendation G.726) and Digital Speech Interpolation - General Aspects of Digital Transmission Systems Terminal Equipments Study Group 15; 378 pp

PT-IPQ, big push big

NP 3806-1988 Textiles Colour fastness. Fastness tests to weathering: outdoor exposure

National Association of Corrosion Engineers (NACE), big push big

NACE RP0281-1998 Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

Consumer Electronics Association （U.S.), big push big

CEA-516-1988 Joint EIA/CVCC Recommended Practice for Teletext: North American Basic Teletext Specification (NABTS)

CZ-CSN, big push big

CSN 03 8260 Za-1989

中华人民共和国国家卫生和计划生育委员会, big push big

GB 12372-1990 Improved Saltzman method of the standard method for the detection of nitrogen dioxide in the atmosphere of residential areas

Professional Standard - Light Industry, big push big

QB/T 2067-1994 Reinforcement design rules for the opening and reinforcement of large inlet and outlet pipes of horizontal continuous cooking pipes

American Petroleum Institute (API), big push big

ANSI/API RP 10B-5:2005(2020) Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure (First Edition)

NZ-SNZ, big push big

AS/NZS 1148:2001 Timber - Nomenclature - Australian, New Zealand and Imported Species (Supersedes NZS 3621: 1987)

未注明发布机构, big push big

DIN EN 10155:1993 Structural steels with improved atmospheric corrosion resistance; Technical delivery conditions

US-CFR-file, big push big

CFR 7-1220.201-2013 Agriculture. Part1220:Soybean promotion, research, and consumer information. Section1220.201:Membership of board.

Professional Standard - Petroleum, big push big

SY/T 6513-2001 Recommended practice for development of a safety and environmental management program for outer continental shelf operations facilities

Military Standard of the People's Republic of China-General Armament Department, big push big

GJB 9937.5-2021 Large-scale ground test methods for launch vehicles Part 5: Booster separation test methods