ZH
RU
ES

Baseline work density

Baseline work density, Total:498 items.

In the international standard classification, Baseline work density involves: Analytical chemistry, Coals, Non-ferrous metals, Optics and optical measurements, Pipeline components and pipelines, Machine tools, Wood, sawlogs and sawn timber, Wood-based panels, Aerospace electric equipment and systems, Horology, Education, Machine tool systems, Soil quality. Pedology, Plastics, Materials for aerospace construction, Radiocommunications, Textile machinery, Products of the chemical industry, Vocabularies, Cutting tools, Metrology and measurement in general, Road vehicle systems, Rubber and plastics products, Vibrations, shock and vibration measurements, Fruits. Vegetables, Paints and varnishes, Insulating materials, Products of the textile industry, ENERGY AND HEAT TRANSFER ENGINEERING, Crude petroleum, Petroleum products in general, Services, Software development and system documentation, Seals, glands, Refractories, Quality, Rubber, Company organization and management, Welding, brazing and soldering, Glass, Electricity. Magnetism. Electrical and magnetic measurements, Bottles. Pots. Jars, Air quality, Construction materials, Woodworking equipment, Electronic components in general, Standardization. General rules, Structures of buildings, Construction industry, Insulating fluids, Electrical accessories, Hand-held tools, Geology. Meteorology. Hydrology, Cases. Boxes. Crates, Sociology. Demography, Civil engineering in general, Linear and angular measurements, Cereals, pulses and derived products, Particle size analysis. Sieving, Radiation measurements, Quantities and units, Ergonomics, Fasteners, Nuclear energy engineering.


National Metrological Verification Regulations of the People's Republic of China, Baseline work density

  • JJG 756-1991 Verification Regulation of Working Standard Equipment for Optical Density
  • JJG 755-2015 Working reference device for ultraviolet irradiance
  • JJG 985-2004 Reference Standard Facility of High Temperature Platinum Resistance Thermometers
  • JJG 755-1991 Verification Regulation of Working Standard Equipment for UV Irradiance
  • JJG 716-1991 Verification Regulation of 0～419.527℃ Working Standard Platinum Resistance Thermometer
  • JJG 719-2021 Working Standards of DC Electromotive Force
  • JJG 218-1991 Verification Reguiation of Working Standards for Inductance
  • JJG 163-1991 Verification Regulation of Working Standards for Capacitance
  • JJG 273-1991 Verification Reguiation of Working Standard Weights
  • JJG 370-1984 Verification Regulation of Working Vibration Tube Liquid Density Meter
  • JJG 733-1991 Verification Regulation of Working Standard Lamps for Total Luminous Flux
  • JJG 719-1991 Verification Regulation for Working Standard of Direct-Current Electromotive Force
  • JJG 727-1991 Verification Regulation of Working Standard of Piston Manometers
  • JJG 833-1993 Verification Regulation of Working Standard Pt-10Rh/Pt,Pt-13Rh/Pt Thermocouple

National Metrological Technical Specifications of the People's Republic of China, Baseline work density

  • JJF 1259-1990 Density (alcohol) deputy benchmark operation technical specification
  • JJF 1324-1990 Technical Specifications for Diffuse Transmittance Visual Density Benchmark Operation
  • JJF 1317-1990 Luminance Reference Operating Specifications
  • JJF 1323-1990 Chromaticity reference operation technical specification
  • JJF 1354-1990 Viscosity benchmark operating technical specification
  • JJF 1355-1990 Humidity Reference Operating Specifications
  • JJF 1314-1990 Illuminance benchmark operation technical specification
  • JJF 1310-1990 Technical Specifications for Photometric Reference Operation
  • JJF 1318-1990 Luminance sub-reference operation technical specification
  • JJF 1356-1990 Acidity (pH) Benchmark Operation Technical Specifications
  • JJF 1369-1995 Line Angle Datum Operation Technical Specifications
  • JJF 1311A-1990 Photometric sub-reference operation technical specification
  • JJF 1311B-1990 Photometric sub-reference operation technical specification
  • JJF 1315-1990 Illuminance secondary benchmark operation technical specification
  • JJF 1319-1990 Technical specification for color temperature reference operation
  • JJF 1211-1990 Technical Specifications for Flatness Datum Operation
  • JJF 1311C-1990 Photometric sub-reference operation technical specification
  • JJF 1320-1990 Color temperature sub-reference operation technical specification
  • JJF 1338-1990 4πβ(LS) activity benchmark operation technical specification
  • JJF 1358-1990 Reagent purity benchmark operation technical specification
  • JJF 1251-1990 Shore Hardness Benchmark Operating Technical Specifications
  • JJF 1249-1990 Vickers Hardness Benchmark Operating Technical Specifications
  • JJF 1245-1990 Rockwell Hardness Benchmark Operating Technical Specifications
  • JJF 1216-1990 90.188~273.15K temperature reference operation technical specification
  • JJF 1218-1990 273.15~903.89K temperature reference operation technical specification
  • JJF 1220-1990 903.89~1337.58K temperature reference operation technical specification
  • JJF 1243-1990 Technical Specifications for Brinell Hardness Benchmark Operation
  • JJF 1334-1990 Specular Gloss Benchmark Operation Technical Specifications
  • JJF 1349-1990 Technical specification for neutron source intensity reference operation
  • JJF 1362-1994 Vertex measurement benchmark operation technical specification
  • JJF 1294-1990 Technical Specifications for Baseline Operation of Magnetic Induction Intensity
  • JJF 1250-1990 Vickers Hardness Vice Benchmark Operating Technical Specifications
  • JJF 1252-1990 Technical specification for microscope hardness benchmark operation
  • JJF 1207-1990 Technical specification for reference operation of dial checker
  • JJF 1208-1990 Technical specification for datum operation of multi-tooth indexing table
  • JJF 1210-1990 Surface Roughness Benchmark Operation Technical Specifications
  • JJF 1219-1990 273.15~903.89K temperature sub-reference operation technical specification
  • JJF 1221-1990 903.89~1337.58K temperature sub-reference operation technical specification
  • JJF 1246-1990 Rockwell Hardness Vice Benchmark Operation Technical Specifications
  • JJF 1244-1990 Technical specification for Brinell hardness sub-standard operation
  • JJF 1364-1995 Technical specifications for the operation of rockwell hardness benchmarks for plastics
  • JJF 1247-1990 Superficial Rockwell Hardness Benchmark Operation Technical Specifications
  • JJF 1253-1990 Technical specifications for the operation of international rubber hardness benchmarks
  • JJF 1214-1990 Technical specifications for taper reference operation of cone gauges
  • JJF 1336-1990 4πβ(PC)-γ conforms to the technical specifications of the activity benchmark operation
  • JJF 1339-1990 4πβ(LS)-γ conforms to the technical specifications of the activity benchmark operation
  • JJF 1340-1990 4πχ(PPC)-γ conforms to the technical specifications of the activity reference operation
  • JJF 1342-1990 Low background 4πα, 4πβ activity benchmark operation technical specification
  • JJF 1363-1995 Technical specification for operation of plastic ball indentation hardness benchmark
  • JJF 1248-1990 Superficial Rockwell hardness secondary benchmark operation technical specification
  • JJF 1361-1990 Technical specification for reference operation of power frequency current proportional value
  • JJF 1337-1990 4πβ(PC)-γ conforms to the technical specifications of the activity sub-standard operation
  • JJF 1341-1990 4πβ(PPC)-γ conforms to the technical specifications of the activity sub-standard operation
  • JJF 1307-1990 0.1~50V, 5~200V Pulse Amplitude Reference Operation Specifications
  • JJF 1321-1990 Operating Technical Norm of Primary Standard for Spectral Radiance and Irradiance in the Range of 250～2500 nm
  • JJF 1352-1990 Technical specifications for the operation of tritium gas and tritium water activity reference
  • JJF 1322A-1990 Operating Technical Norm of Secondary Standard for Spectral Radiance in the Range of 250～2500 nm
  • JJF 1322B-1990 Operating Technical Norm of Secondary Standard for Spectral Irradiance in the Range of 250～2500 nm
  • JJF 1316-1990 10~10-6 lux low-light photometric benchmark operation technical specification

Standard Association of Australia （SAA）, Baseline work density

  • ASRM 015-2005 Reference material - Coal - Relative density
  • AS 1289.5.8.5:1998(R2013)
  • AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
  • AS 1289.5.8.4:2009
  • AS 1289.5.8.4:2009/Amdt 1:2012
  • AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
  • AS 1289.5.8.4:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
  • AS 1289.5.8.8:1998(R2013)
  • AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
  • AS 1289.3.5.1:2006 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the soil particle density of a soil - Standard method
  • AS 1649:2001 Timber - Methods of test for mechanical fasteners and connectors - Basic working loads and characteristic strengths
  • AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
  • AS 1289.5.8.9:1998(R2013)
  • AS 1289.5.8.7:1998(R2013)
  • AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components

Professional Standard - Railway, Baseline work density

American Society for Testing and Materials (ASTM), Baseline work density

  • ASTM B777-99 Standard Specification for Tungsten Base, High-Density Metal
  • ASTM B777-15(2020) Standard Specification for Tungsten Base, High-Density Metal
  • ASTM B777-07(2013) Standard Specification for Tungsten Base, High-Density Metal
  • ASTM E1079-00 Standard Practice for Calibration of Transmission Densitometers
  • ASTM B777-07 Standard Specification for Tungsten Base, High-Density Metal
  • ASTM B777-15 Standard Specification for Tungsten Base, High-Density Metal
  • ASTM E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM D2395-14 Standard Test Methods for Density and Specific Gravity 40;Relative Density41; of Wood and Wood-Based Materials
  • ASTM D2395-14e1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
  • ASTM D3748-14 Standard Practice for Evaluating High-Density Rigid Cellular Plastics
  • ASTM E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM D3554-07 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 176;C Operation
  • ASTM D3554-07(2013) Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 deg;C Operation
  • ASTM C838-96(2005) Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
  • ASTM D6814-02e1 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • ASTM D6814-02(2018) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • ASTM E2461-05(2011) Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
  • ASTM D6814-02(2023) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • ASTM C907-03 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  • ASTM C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  • ASTM C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  • ASTM D3554-01 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
  • ASTM D3554-98 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
  • ASTM D6058-96(2006) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6058-96(2001) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6058-96 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM E3416-23 Standard Practice for Competency-based Workplace Learning Programs
  • ASTM D831-94(1999)e1 Standard Test Method for Gas Content of Cable and Capacitor Oils
  • ASTM F2160-10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM F2160-16 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM D8318-20 Standard Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing
  • ASTM D6058-96(2011) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6058-96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM F1825-97e1 Standard Specification for Fixed Length Clampstick Type Live Line Tools
  • ASTM D6881/D6881M-03(2020) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
  • ASTM F2160-08 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM F2160-22 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM F2160-22a Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM D6881/D6881M-03(2013) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
  • ASTM D6814-02(2008) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • ASTM D6814-02(2013) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM D6881/D6881M-03(2008)e1 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
  • ASTM F3034-14 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene &40;HDPE&41;
  • ASTM D4483-05a(2011) Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
  • ASTM D6832-13(2018) Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
  • ASTM E180-93 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
  • ASTM C1215-92(2006) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Baseline work density

  • GB 1258-2008 Working chemical.Potassium iodate
  • GB 1260-2008 Working chemical.Zinc oxide
  • GB 10736-2008 Working chemical.Potassium chloride
  • GB 12594-2008 Working chemical.Potassium bromate
  • GB 12595-2008 Working chemical.Silver nitrate
  • GB 12596-2008 Working chemical.Calcium carbonate
  • GB 12597-2008 Working chemical.Benzoic acid
  • GB 1253-2007 Working chemical Sodium chloride
  • GB 1254-2007 Working chemical.Sodium oxalate
  • GB 1259-2007 Working chemical.Potassium dichromate
  • GB 10736-1989 Working chemical--Potassium chloride
  • GB 1253-1989 Working chemical--Sodium chloride
  • GB 1254-1990 Working chemical--Sodium oxalate
  • GB 1258-1990 Working chemical--Potassium iodate
  • GB 1260-1990 Working chemical--Zinc oxide
  • GB 12595-1990 Working chemical--Silver nitrate
  • GB 12596-1990 Working chemical--Calcium carbonate
  • GB 12597-1990 Working chemical--Benzoic acid
  • GB 12594-1990 Working chemical--Potassium bromate
  • GB 1256-2008 Working chemical.Arsenic trioxide
  • GB 1255-2007 Working chemical.Sodium carbonate anhydrous
  • GB 1259-1989 Working chemical--Potassium dichromate
  • GB 1255-1990 Working chemical--Sodium carbonate anhydrous
  • GB 1256-1990 Working chemical--Arsenic trioxide
  • GB 1257-2007 Working chemical.Potassium hydrogen phthalate
  • GB 12593-2007 Working chemical.Ethylenediaminetetraacetic acid disodium salt
  • GB 10738-1989 Working chemical--General rules for the weight titration
  • GB 1257-1989 Working chemical--Potassium hydrogen phthalate
  • GB 12593-1990 Working chemical--Ethylenediaminetetraacetic acid disodium salt
  • GB 10737-1989 Working chemical--General rules for the potentiometric weight titration
  • GB 10738-2007 Working chemical.General rules for assay.Weight titration
  • GB/T 7155.1-1987 Determination of density of thermoplastic pipes and fittings--Part 1: Determination of reference density of polyethylene pipes and fittings
  • GB/T 41866.2-2022 Systems and software engineering—Information technology project performance benchmarking framework—Part 2: Requirements for benchmarking
  • GB/T 6379.4-2006 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
  • GB 10737-2007 Working chemical.General rules for assay.Weight titration (potentiometric method)
  • GB/T 24421.1-2009 Guidelines for standardization of organization in service sector.Part 1:Basic requirements
  • GB/T 32170.1-2015 Guide to standardization of administrative service centre.Part 1:Basic requirements
  • GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method

Association Francaise de Normalisation, Baseline work density

  • NF T54-049:1977 Evaluation of the reference density of polyethylene in form of a pipes.
  • NF T54-050:1977 Evaluation of the reference density of polyethylene in form of granulates.
  • NF ISO 7632:1987 Véhicules routiers - Joints en caoutchouc pour cylindres de freins hydrauliques à disque utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
  • NF ISO 7631:1987 Véhicules routiers - Coupelles et joints en caoutchouc pour cylindres de dispositifs de freinage hydraulique utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
  • NF L09-503:1978 Standardized electrical cables. Code for operating temperatures and for type of conductor coating.
  • NF ISO 5725-4:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 4 : méthodes de base pour la détermination de la justesse d'une méthode de mesure normalisée
  • NF R12-647*NF ISO 7632:1987 Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).
  • NF R12-646*NF ISO 7631:1987 Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degres C max.).
  • NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
  • NF R12-645*NF ISO 7630:1987 Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).
  • NF T30-499-2:2011 Coating powders - Part 2 : determination of density by gas comparison pyknometer (referee method).
  • NF T30-499-2*NF EN ISO 8130-2:2021 Coating powders - Part 2 : determination of density by gas comparison pyknometer (referee method)
  • NF X43-277:2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
  • NF L54-175-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 007 : cable clamp - Product standard.
  • NF L54-175-007*NF EN 3545-007:2015 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 007 : cable clamp - Product standard
  • NF EN 482:2021 Exposition sur les lieux de travail - Procédures pour déterminer la concentration d'agents chimiques - Exigences élémentaires relatives aux performances
  • NF E11-020:2020 Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation
  • NF L54-175-004*NF EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non sealed rear, plastic housing, locking device, operating temperatures -55 oC to 175 oC - Part 004 : Connectors with male contacts - Product standard
  • NF EN 3545-007:2015 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 007 : serre-câbles - Norme de produit
  • NF EN 3545-004:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation -55 oC à 175 oC - Partie 004 : connecteurs à contacts mâles - Norme d...
  • NF EN 3545-003:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 003 : Connecteurs à contacts femelles - Norm...
  • NF E11-020:1994 Length measuring instruments. Limit gauges and working standards. Terminology. Shortened designation.
  • NF L54-175-003*NF EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 003 : connectors with female contacts - Product standard
  • NF L54-175-008*NF EN 3545-008:2007 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 008 : Tools for assembly/removal of coding and attachment system - Product standard
  • NF X31-433*NF ISO 16586:2003 Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
  • NF EN 3545-008:2007 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 008 : outils d'assemblage/démontage du syst...
  • NF ISO 5725-2:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
  • NF L54-147-005*NF EN 3372-005:2008 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 oC to 175 oC or 200 oC continuous - Part 005 : receptacle, hermetic, round flange, solder mounting - Produ
  • NF T77-106:1987 Basic silicones for industrial use. Determination of extrudability (fluidity) and of viscosity "casson". Method using standard extrusion nozzle.

PL-PKN, Baseline work density

  • PN M70003-1968 Industrial radiography Standarts of density
  • PN Z04068-02-1985 Air purity protection Tests for dimethyl sulphate Determination. of dimethyl sulphate in work places by turbidimetric method
  • PN Z04145-02-1985 Air purity protection Tests for benzidine Determination of benzidine in work places by colorimetric method
  • PN Z04150-02-1985 Air purity protection Tests for nitropropanes Determination of 2-nitropropane in work places by colorimetric method
  • PN Z04169-02-1986 Air purity.protection Tests for 4,6-dinitroorthocreso! Determination of 4,6-dinitroorthocresol in work places by UV spectrophotometry absorption
  • PN Z04189-02-1988 Air purity protection ests tor aminodiphcnyl etermination ot 4-aminodiphcnyl t work places by gas hromalography' with sample nrichment
  • PN Z04210-02-1989 Air purity protection Tests for />-nitrophenol Determination of /j-riitrophenol in work places by high performance liquid chromatography
  • PN Z04212-02-1989 Air purity protection Tests for nitroglycol Determination of nitroglycol in work places by gas chromatography
  • PN Z04165-02-1986 Air purity protection esls lor methylbutylkelonc cterminution ol meihylisobutylketonc work places b\ gus chromatogruphy illi siimplc cnridimcni
  • PN Z04162-02-1986 Air punty protection ests for diethylamine etermination of diethylamine n work places by gas hromatography with sample nrichment
  • PN Z04148-03-1987 Air purity protection Tests for N,N-dimethylhydrazine Determination of hydrazine and its derivatives in work places by colorimetric method
  • PN Z04177-02-1987 Air purity protection ests for 7V-phenyInaphtylamine etermination of JV-phenyl-2-naphtyl- mine at \vork places by colorimetric ethod

IT-UNI, Baseline work density

  • UNI 314-1970
  • UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • UNI EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
  • UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

RU-GOST R, Baseline work density

  • GOST 2110-1993 Horizontal boring machines with compound table. Standarts of accuracy
  • GOST 2110-1985 Horizontal boring machines. Standards of accuracy
  • GOST 13135-1990 Surface grinders with rectangular table. Basic dimensions. Standards of accuracy
  • GOST R 50086-1992 Tool grinding machines. Basic dimensions. Standarts of accuracy
  • GOST R 50087-1992 Electrodischarge machines. Basic dimensions. Standards of accuracy
  • GOST 659-1989 Cylindrical gear hobbers with vertical work axis. Basic parameters and dimensions. Standards of accuracy
  • GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method
  • GOST 273-1990 Surface grinding machines with compound table and horizontal spindle. Basic dimensions. Standards of accuracy and rigidity
  • GOST 16461-1993 Slide units for modular type machine tools. Basic dimensions. Standards of accuracy
  • GOST 12930-1967 Cotton and mixed fabrics for work clothing. Norms of colour fastness
  • GOST 31.211.41-1983 System of technological arrangement standards. Elements and assembly junction of built up detachable fixtures for assembly and welding. Basic constructive elements and parameters. Precession norms
  • GOST 11576-1983 Horizontal fine machines with movable table. Standards of accuracy
  • GOST 6854-1988 Woodworking equipment. Bandsawing machines. Basic parameters standards of accuracy
  • GOST R 50062-1992 Woodworking equipment. Thicknessing machines. Basic parameters. Norms of accuracy and rigidity
  • GOST 8.528-1985 State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure
  • GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
  • GOST ISO 9009-2013 Glass containers. Height and non-parallelism of finish with reference to container base. Test methods

TR-TSE, Baseline work density

  • TS 960-1971 STANDARD WORKING WIDTHS OF VVEAVING LOOMS
  • TS 1954-1975 LIQUEFIED PHENOL, m-CRESOL, CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF DENSITY AT 20°C

Professional Standard - Machinery, Baseline work density

  • JB/T 8514.3-1997 Guidelines for enterprises' standardization work Basic requirement for preparation of administrative standards and work standards
  • JB/T 11770.1-2014 High speed & precision CNC rotary table.Part 1: Testing of the accuracy

PK-PSQCA, Baseline work density

  • PS 619-1967 PAKISTAN STANDARD SPECIFICATION FOR PARTICLE BOARD (MEDIUM DENSITY)
  • PS 436-1965 PAKISTAN STANDARD SPECIFICATION FOR COTTON GABERDINE, BLEACHED
  • PS 438-1965 PAKISTAN STANDARD SPECIFICATION FOR WEAVING LOOMS WORKING WIDTH

British Standards Institution (BSI), Baseline work density

  • BS EN 3372-005:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard
  • BS EN 3545-007:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 007: Cable clamp — Product standard
  • BS EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Cable clamp - Product standard
  • BS EN 3545-007:2014 Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C. Cable clamp. Product standard
  • BS EN 3372-007:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for plug - Product standard
  • BS EN 3372-003:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Square flange receptacle - Product standard
  • BS EN 3372-011:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Dummy receptacle - Product standard
  • BS EN 3372-006:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for receptacle - Product standard
  • BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
  • BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
  • 22/30380920 DC BS ISO 5725-3. Accuracy (trueness and precision) of measurement methods and results - Part 3. Intermediate precision and alternative designs for collaborative studies
  • BS EN 3372-009:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard
  • BS EN 3372-008:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Free plug with grounding spring - Product standard
  • BS ISO 4930:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.)
  • BS ISO 6118:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
  • BS EN 3372-001:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Technical specification
  • BS EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with female contacts - Product standard
  • BS EN 3545-003:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 003: Connectors with female contacts — Product standard
  • BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
  • BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
  • BS EN 482:2021 Workplace exposure. Procedures for the determination of the concentration of chemical agents. Basic performance requirements
  • BS EN 3372-002:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Specification of performance and contact arrangement
  • BS ISO 4928:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • BS EN 3545-008:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Tools for assembly/removal of coding and attachment systems - Product standard
  • BS EN 3545-001:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures –55 ℃ to 175 ℃ — Part 001: Technical specification
  • BS ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results. Intermediate precision and alternative designs for collaborative studies
  • BS ISO 3686-2:2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Portal type machines with moving table
  • BS EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with male contacts - Product standard
  • BS EN 3545-004:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ - Part 004: Connectors with male contacts - Product standard
  • BS ISO 12789-2:2008 Reference radiation fields - Simulated workplace neutron fields - Calibration fundamentals related to the basic quantities
  • BS EN 3545-009:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 009: Protective cover for plug and receptacle — Product standard
  • BS EN 3646-006:2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard
  • BS EN 3646-005:2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
  • BS EN 3646-005:2017 Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous. Receptacle, hermetic, square flange mounting. Product standard
  • BS EN 3545-002:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 002: Specification of performance and contact arrangements
  • BS EN 3545-001:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Technical specification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Baseline work density

  • ASHRAE AC-02-8-2-2002 Use of Optical Density-Based Measurements as Metrics for Smoke Detectors
  • ASHRAE HI-02-6-4-2002 Field Measurements of Operative Temperatures in Buildings Heated or Cooled by Embedded Water-Based Radiant Systems

Korean Agency for Technology and Standards (KATS), Baseline work density

  • KS B ISO 10552-2002(2012) Timekeeping instruments－Crowns and sealed tubes－Designs and dimensions
  • KS R ISO 6118:2009 Road vehicles－Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid(Service temperature 70 ℃ maximum)
  • KS B 0142-2001 MECHANICAL VIBRATION OF MACHINES WITH OPERATING SPEEDS FROM 10 TO 200REV/S-BASIS FOR SPECIFYING EVALUATION STANDARDS
  • KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • KS R ISO 7630:2008 Road vehicles－Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 ℃ max.)
  • KS R ISO 6119-2009(2019) Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ℃ maximum)
  • KS R ISO 4930-2015(2020) Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 150 ℃ maximum)
  • KS R ISO 6119:2009 Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ℃ maximum)
  • KS R ISO 4930:2009 Road vehicles-Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 150 ℃ maximum)
  • KS C 3390-2022 Power density measurement method of the portable wireless transmission equipment operating above 6 GHz
  • KS T ISO 9009:2002 Glass container－Height and non－parallelism of finish with reference to container base－Test methods
  • KS R ISO 7631-2015(2020) Road vehicles－Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid(service temperature 120℃ max.)
  • KS F ISO 9194:2002 Bases for design of structures-Actions due to the self-weight of structures,non-structural elements and stored materials-Density
  • KS R ISO 7631:2005 Road vehicles-Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid(service temperature 120℃ max.)
  • KS R ISO 6118-2009(2019) Road vehicles－Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid(Service temperature 70 ℃ maximum)
  • KS R ISO 4928-2009(2019) Road vehicles－Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid(Service temperature 120 ℃ maximum)
  • KS R ISO 4928:2009 Road vehicles－Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid(Service temperature 120 ℃ maximum)
  • KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
  • KS A ISO 12789-2-2012(2017) Reference radiation fields－Simulated workplace neutron fields－Part 2：Calibration fundamentals related to the basic quantities
  • KS B ISO 3002-1:2013 Basic quantities in cutting and grinding-Part 1:Geometry of the N part of cutting tools-General terms, reference systems, tool and working angles, chip breakers
  • KS B ISO 3686-2:2014 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type machines with moving table
  • KS B ISO 3686-2:2012 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle-Testing of the accuracy-Part 2 : Portal type machines with moving table
  • KS B ISO 14137:2014 Machine tools — Test conditions for wire electrical-discharge machines(wire EDM) — Terminology and testing of the accuracy
  • KS B ISO 14137:2012 Machine tools-Test conditions for wire electrical-discharge machines(wire EDM)-Terminology and testing of the accuracy
  • KS A ISO 12789-2-2012(2022) Reference radiation fields－Simulated workplace neutron fields－Part 2：Calibration fundamentals related to the basic quantities
  • KS A ISO 7243-2005(2021) Hot environments－Estimation of the heat stress on working man, based on the WBGT－index(wet bulb globe temperature)

RO-ASRO, Baseline work density

  • STAS 12449-1986 WORKING CENTERS WITH HORIZONTAL OR VERTICAL SPINDLE Prescriptions for working precision
  • STAS 9015-1982 Modular units machine-tools BORING WORKING UNITS WITH SPINDLE Basic and mating dimensions

Group Standards of the People's Republic of China, Baseline work density

  • T/DLQYLHH 001-2023 Basic work standards for team leaders and guidelines for evaluating outstanding team leaders
  • T/CSTM 00277.1-2022 Evaluation of stability for analytical instruments Part 1: Evaluation based on the precision of standard method
  • T/FJJX 2-2020 Work standard for bidding agency business of Building construction and Municipal infrastructure projects in Fujian Province

Association of German Mechanical Engineers, Baseline work density

  • VDI/DGQ 3445 Blatt 1-1977 Statistical examination of exactly working of grinding machines; fundamentels
  • VDI 7001-2014 Communication and public participation in planning and building of infrastructure projects - Standards for work stages of engineers

Society of Automotive Engineers (SAE), Baseline work density

  • SAE AMS-T-21014-1998 Tungsten Base Metal, High Density Should Be Used Instead of MIL-T-21014D, Which Was Cancelled on October 5, 1998

International Telecommunication Union (ITU), Baseline work density

  • ITU-T Q.2964.1-1996 Digital Subscriber Signalling System No. 2: Basic Look-Ahead - Series Q: Switching and Signalling Broadband ISDN - B-ISDN Application Protocols for Access Signalling Study Group 11; 24 pp
  • ITU-R S.524-8-2003 Maximum permissible levels of off-axis e.i.r.p. density from earth stations in geostationary-satellite orbit networks operating in the fixed-satellite service transmitting in the 6 GHz, 13 GHz, 14 GHz and 30 GHz frequency bands Questions ITU-R 70/4 and I

International Organization for Standardization (ISO), Baseline work density

  • ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s; Basis for specifying evaluation standards
  • ISO 3002-1:1982 Basic quantities in cutting and grinding; Part 1 : Geometry of the active part of cutting tools; General terms, reference systems, tool and working angles, chip breakers
  • ISO/PRF 5725-3 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
  • ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
  • ISO 7630:1985 Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
  • ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
  • ISO 6118:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
  • ISO 6118:1980 Road vehicles; Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
  • ISO 4930:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.)
  • ISO 6119:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • ISO 6119:1980 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
  • ISO 4930:1978 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
  • ISO 7632:1985 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
  • ISO 9009:1991 Glass containers; heigth and non-parallelism of finish with reference to container base; test methods
  • ISO 9194:1987 Bases for design of structures; Actions due to the self-weight of structures, non-structural elements and stored materials; Density
  • ISO 4928:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • ISO 4928:1980 Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
  • ISO 7631:1985 Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
  • ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • ISO 9059:1990 Solar energy; calibration of field pyrheliometers by comparison to a reference pyrheliometer
  • ISO 3002-2:1982 Basic quantities in cutting and grinding; Part 2 : Geometry of the active part of cutting tools; General conversion formulae to relate tool and working angles
  • ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
  • ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
  • ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Danish Standards Foundation, Baseline work density

  • DS/ISO 2372:1983 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s. Basis for specifying evaluation standards
  • DS 21001:2020 Railway safety management systems – Work related to infrastructure – Requirements – CORRECTIONS 1
  • DS/EN 482:2021 Workplace exposure – Procedures for the determination of the concentration of chemical agents – Basic performance requirements
  • DS/ENV 1991-2-1:1995 Eurocode 1: Basis of design and actions on structures - Part 2-1:Actions on structures - Densities , self-weight and imposed loads
  • DS/EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard
  • DS 21002:2020 Railway safety management systems – Work related to infrastructure – Guidance – CORRECTIONS 1
  • DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
  • DS/EN 3545-008:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard

Professional Standard - Textile, Baseline work density

  • FZ/T 90053-2007 Working widths for weaving and knitting preparatory machines and finishing machines

AENOR, Baseline work density

  • UNE 40171:1973 MACHINES OF PREPARATION FOR COTTON SPINNING. USEFUL WORK WIDTH.
  • UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.

Professional Standard - Aerospace, Baseline work density

  • QJ 1584-1988 Basic provisions for the establishment of enterprise management standards and work standards
  • QJ 1835.1-1990 Provisions on the preparation of the annual plan for the management measures for the establishment and revision of aerospace industry standards

ZA-SANS, Baseline work density

  • SANS 205:2009 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
  • SANS 206:2003 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 鳦 max.)
  • SANS 206:2009 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • SANS 4930:2003 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 鳦 max.)
  • SANS 4930:2009 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.)
  • SANS 4928:2003 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 鳦 max.)
  • SANS 4928:2009 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • SANS 205:2003 Road vehicles - Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 鳦 max.)
  • SANS 6164:1990 Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry

KR-KS, Baseline work density

  • KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Baseline work density

  • PREN 3646-011-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 011 - Dummy Sealed Receptacle (Edition: 5E)
  • PREN 3646-003-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 003 - Square Flangs Sealed Receptacle (Edition: 4E)
  • PREN 3646-005-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 005 - Hermetic Square Flange Receptacle (Edition: 5E)
  • PREN 3545-008-2005 Aerospace Series Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly emoval of coding and attachment system Product stan
  • PREN 3646-006-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 006 - Jam-Nut Mounted Round Flange Hermetic Receptacle (Edition: 5E)
  • PREN 3646-004-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty PArt 004: Jam-Nut Mounted Round Flange Sealed Receptacle (Edition: 5E)
  • PREN 3545-007-2002 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 2)
  • PREN 3545-007-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 1)
  • PREN 3545-007-2004 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 3)
  • PREN 3646-007-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 007: Round Flange Hermetic Receptacle Attached by Brazing (Edition: 5E)
  • PREN 2267-003-1991 Aerospace Series Electrical Cables for General Use Operating Temperatures between -55 and +260 Degrees Celsius Product Standard
  • PREN 3545-004-2004 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard (Edition P 3)
  • PREN 3545-003-2004 Aerospace series Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard (Edition P 3)
  • PREN 3372-005-2005 Aeropsace Series Connectors@ Electrical@ Circular@ Medium and High Contact Density@ Scoop-Proof with Bayonet Coupling@ Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle@ Hermetic@ Round Flange@ Solder
  • PREN 3372-011-2005 Aerospace series Connectors@ electrical@ circular@ medium and high contact density@ scoop-proof with bayonet coupling@ operating temperatures - 65 degrees C to 175 degrees C or 200 degrees C continous Part 011: Dummy receptacle Product standard (Edition P
  • PREN 3372-009-2005 Aeropsace Series Connectors@ Electrical@ Circular@ Medium and High Contact Density@ Scoop-Proof with Bayonet Coupling@ Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 009: Receptacle@ Jam Nut Mounting Product Standa
  • PREN 3545-001-2004 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification (Edition P 3)
  • PREN 3545-001-2002 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification (Edition P 2)
  • PREN 4067-005-2000 Aerospace Series Connectors@ Electrical@ Circular@ Scoop-Proof@ Coupled by Threaded Ring@ Fire-Resistant@ Operating Temperature 260 Degrees C Peak Part 005: Hermetic Square Recptacle Product Standard (Edition P 1)
  • PREN 4067-005-1995 Aerospace Series Connectors@ Electrical@ Circular@ Scoop-Proof@ Coupled by Threaded Ring@ Fire Resistant@ Operating Temperature 260 Degrees Celsius Peak Part 005 - Hermetic Square Receptacle Product Standard (Edition 1E)
  • PREN 3545-007-2013 Aerospace series Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures - 55 °C to 175 °C Part 007: Cable clamp Product standard (Edition P 4)

European Association of Aerospace Industries, Baseline work density

  • AECMA PREN 3545-007-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 2
  • AECMA PREN 3545-007-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 3
  • AECMA PREN 3545-007-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 1
  • AECMA PREN 3545-003-2004 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard Edition P 3
  • AECMA PREN 3545-003-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 2
  • AECMA PREN 3545-003-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 1
  • AECMA PREN 3545-004-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard Edition P 3
  • AECMA PREN 3545-004-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 2
  • AECMA PREN 3545-004-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 1
  • AECMA PREN 3545-009-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 009: Protective cover for plug and receptacle Product standard Edition P 1
  • AECMA PREN 3545-001-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 001: Technical specification Edition P 4
  • AECMA PREN 3545-001-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 3
  • AECMA PREN 3545-001-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 2
  • AECMA PREN 3545-008-2005 Aerospace Series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly/removal of coding and attachment system Product st
  • AECMA PREN 3545-002-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 002: Specification of performance and contact arrangements Edition P 5
  • AECMA PREN 3545-002-1998 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Edi
  • AECMA PREN 3545-002-2004 Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements Editi
  • AECMA PREN 3545-002-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Devices, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Ed
  • AECMA PREN 3545-001-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 1; Corrigendum 04/30/1995
  • AECMA PREN 2267-003-1991 Aerospace Series Electrical Cables for General Use Operating Temperatures between -55 and +260 Degrees Celsius Product Standard
  • AECMA PREN 3545-005-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 005 : Female Coding and Attachment System for Mounting on Free Housing (Pl
  • AECMA PREN 3545-006-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Rece

CZ-CSN, Baseline work density

VN-TCVN, Baseline work density

  • TCVN 7365-2003 Air in workplace.Limit of concentration of dust and air pollutant for cement plants
  • TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
  • TCVN 6910-2-2001 Accuracy (trueness and precision) of measurement methods and results.Part 2: Basic methos for the determination of repeatability and reproducibility of a standard measurement method

能源部, Baseline work density

  • SY/T 5452-1992 Basic provisions for the preparation of management standards and work standards for petroleum enterprises

Shandong Provincial Standard of the People's Republic of China, Baseline work density

  • DB37/T 112-1989 Basic Work Standards for Energy Conservation Management of Mechanical Industry Enterprises in Shandong Province

Professional Standard - Commodity Inspection, Baseline work density

  • SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density

European Committee for Standardization (CEN), Baseline work density

  • DD ENV 1991-2-1-1995 Eurocode 1: Basis of Design and Actions on Structures - Part 2-1: Actions on Structures - Densities, Self-Weight and Imposed Loads
  • EN 3545-007:2005 Areospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 degree C to 175 degrees C - Part 007: Cable clamp Product standard
  • EN 3545-008:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard
  • EN 3372-005:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Produc
  • EN 3545-004:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
  • EN 3646-007:2006 Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 癈 or 200 癈 continuous Part 007: Receptacle, hermetic, round flange, welding or brazing mounting Product standard
  • EN 3545-009:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C - Part 009: Protective cover for plug and receptacle - Product standard
  • prEN 127-1-1980 CEN-heating boiler standard for boilers with operating temperature up to 100 C
  • EN 3545-003:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 degree C to 175 degrees C - Part 003: Connectors with female contacts Product standard
  • EN 3545-007:2014 Aerospace series - Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures - 55 ��to 175 ��- Part 007: Cable clamp - Product standard
  • EN 3646-006:2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard
  • EN 3646-005:2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
  • EN 3646-006:2018 Aerospace series - Connectors@ electrical@ circular@ bayonet coupling@ operating temperature 175 ��or 200 ��continuous - Part 006: Receptacle@ hermetic@ jam-nut mounting - Product standard

Japanese Industrial Standards Committee (JISC), Baseline work density

  • JIS K 2249:1995 Crude petroleum and petroleum products -- Determination of density and petroleum measurement tables based on a reference temperature (15 centigrade degrees)

Anhui Provincial Standard of the People's Republic of China, Baseline work density

  • DB34/T 2131-2014 Guidelines for Standardized Work of Travel Agencies Part 1: Basic Requirements

Aerospace, Security and Defence Industries Association of Europe (ASD), Baseline work density

  • ASD-STAN PREN 2997-004-2005 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire-Resistant or Non Fire-Resistant, Operating Temperatures -65 Degrees C to 175 Degrees C Continuous, 200 Degrees C Continuous, 260 Degrees C Peak Part 004: Jam-Nut Mounted Rec
  • ASD-STAN PREN 3372-005-2005 Aeropsace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle, Hermetic, Round Flange, Solder
  • ASD-STAN PREN 3372-007-2005 Aerospace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 007: Protective Cover for Plug - Product Standar
  • ASD-STAN PREN 3372-003-2005 Aerospace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 003: Square Flange Receptacle - Product Standard
  • ASD-STAN PREN 3372-006-2005 Aeropsace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 006: Protective Cover for Receptacle - Product S
  • ASD-STAN PREN 3372-011-2005 Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees C to 175 degrees C or 200 degrees C continous Part 011: Dummy receptacle Product standard (Edition P
  • ASD-STAN PREN 3372-009-2005 Aeropsace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 009: Receptacle, Jam Nut Mounting Product Standa
  • ASD-STAN PREN 3372-008-2005 Aeropsace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 008: Free Plug with Grounding Spring - Product S
  • ASD-STAN PREN 3372-002-2005 Aerospace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C and 200 Degrees C Continuous Part 002: Specification of Performance and Contact A
  • ASD-STAN PREN 3372-001-2005 Aerospace series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 001: Technical Specification (Edition P 1)
  • ASD-STAN PREN 3476-005-2001 Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle, Hermetic, Square Flange Mounting Product Standard (Edition P 1)

German Institute for Standardization, Baseline work density

  • DIN EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2005
  • DIN EN 482:2021-05 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements; German version EN 482:2021
  • DIN EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version EN 3
  • DIN EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version EN
  • DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
  • DIN EN 3545-008:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard; Ge
  • DIN EN 3545-007:2015-03 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2014
  • DIN EN 29009:1994 Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991); German version EN 29009:1994
  • DIN EN 3372-005:2008 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product
  • DIN EN 3545-009:2009 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 009: Protective cover for plug and receptacle - Product standard; German and English v
  • DIN EN 3545-007:2015 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2014
  • DIN EN 3545-008:2008-02 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standar...

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Baseline work density

  • IEEE P1882/D02-2016 Guide for Establishing@ Benchmarking and Maintaining a Working Program for Energized Transmission Lines

Tianjin Provincial Standard of the People's Republic of China, Baseline work density

  • DB12/T 719.1-2016 Standardization Work Guidelines for Commerce and Trade Logistics Part 1: Basic Requirements

AT-ON, Baseline work density

  • OENORM EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements

CH-SNV, Baseline work density

  • SN EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements

Lithuanian Standards Office , Baseline work density

  • LST EN 482-2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
  • LST EN 3545-007-2015 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
  • LST EN 3545-007-2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
  • LST EN 3545-008-2007 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard

ES-UNE, Baseline work density

  • UNE-EN 482:2021 Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
  • UNE-EN 3545-007:2014 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard (Endorsed by AENOR in February of 2015.)
  • UNE-EN 3545-008:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standa...

GOSTR, Baseline work density

  • GOST R 58400.1-2019 Automobile roads of general use. Petroleum-based bitumen binder. Specifications based on operational temperature range

PH-BPS, Baseline work density

  • PNS ISO 4928:2021 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

SE-SIS, Baseline work density

  • SIS SS-ISO 7631:1986 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temp- erature 120 °C max)
  • SIS SS-ISO 6118:1981 Road vehicles - Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service tempe- rature 70 °C max.)
  • SIS SS-ISO 4928:1979 Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
  • SIS SS-ISO 6119:1981 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
  • SIS SS-ISO 4930:1979 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.)
  • SIS SS-ISO 7632:1988 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.)

Professional Standard - Electron, Baseline work density

  • SJ 1.1-1987 Major procedures and requirements for working out of annual plans relating to technical standards in electronic industry

US-FCR, Baseline work density

国家市场监督管理总局、中国国家标准化管理委员会, Baseline work density

  • GB/T 37852-2019 Class containers—Height and non-parallelism of finish with reference to container base—Test methods
  • GB/T 1.2-2020 Directives for standardization—Part 2:Drafting rules of standardizing documents based on ISO/IEC standardizing documents

Liaoning Provincial Standard of the People's Republic of China, Baseline work density

  • DB21/T 2028.1-2012 Guidelines for the standardization work of the Office Open Network Part 1: Basic Requirements

(U.S.) Ford Automotive Standards, Baseline work density

  • FORD WSK-M1L124-A-2003 CABLE, LOW TENSION, VINYL INSULATED, 105 DEGREES C, THIN WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1L120-A3-2003 CABLE, PRIMARY LOW TENSION, 85 °C VINYL INSULATED - REDUCED WALL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M1L124-B-2003 CABLE, LOW TENSION, VINYL INSULATED, 90 DEGREES C, STANDARD WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M1L124-A)
  • FORD WSS-M4G252-E2-2009 SEALER, VINYL, LOW DENSITY, EXTRUDABLE, SPRAYABLE ABRASION RESISTANT, NON-PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4E12-A-2002 PAPER, CONDENSER, LOW DENSITY, ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M1L125-A-2003 CABLE, LOW TENSION, VINYL INSULATED, 105 DEGREES C, THIN WALL, TINNED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M1L124-A)
  • FORD WSS-M22P6-A6-1997 CABLE, PRIMARY LOW TENSION, 0.15 MM WALL, 200 C (Shown on FORD WSS-M22P6-A1)
  • FORD WSS-M1L137-A-2008 CABLE, PRIMARY LOW TENSION, 150 °C ***TO BE USED WITH FORD WSS-M99P1111-A***

AREMA - American Railway Engineering and Maintenance-of-Way Association, Baseline work density

  • CHAPTER 18-2002 Light Density and Short Line Railways (Volume 3/Infrastructure and Passenger (See MANUAL FOR RAILWAY ENGINEERING))

Professional Standard - Light Industry, Baseline work density

  • QB/T 1753.2-1993 Basic standards for working drawings stipulated in light machine product drawings and design documents

(U.S.) Plastic Pipe Association, Baseline work density

  • PPI TR-3-2016 Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermo
  • PPI TR-3-2021 Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermo

CU-NC, Baseline work density

  • NC 19-01-56-1986 Occupational Hygiene and Safety Standards System. Working Apea Ventilation. Determinaron of Hydrogen Cyanide
  • NC 90-14-35-1988 Standards System for Metrological Assurance. Metastatic Working-Thermometers. Methods and Means of Verification

Illuminating Engineering Society of North America, Baseline work density

  • IESNA LM-61-1996 Approved Guide for Identifying Operating Factors for Installed High Intensity Discharge (HID) Luminaires

  working reference silver nitrate, working reference silver nitrate, Densitometer work, Densitometer work, Portable Densitometer Work, Baseline work density, work density, work density, Density benchmark, work on density, How the Density Meter Works, Working base reagent capacity, work benchmark, Potassium dichromate working reference reagent, working density meter, working reference reagent.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved