ZH
RU
ES
Three-electrode electrode holder
Three-electrode electrode holder, Total:500 items.
In the international standard classification, Three-electrode electrode holder involves: Welding, brazing and soldering, Electromechanical components for electronic and telecommunications equipment, Optoelectronics. Laser equipment, Rotating machinery, Non-ferrous metals, Semiconductor devices, Analytical chemistry, Aerospace electric equipment and systems, Aerospace engines and propulsion systems, Conducting materials, Construction materials, Insulating fluids, On-board equipment and instruments, Electrical equipment for working in special conditions, Inorganic chemicals, Products of non-ferrous metals, Telecommunications in general, Medical equipment, Materials for aerospace construction, Electronic component assemblies, Electrical and electronic testing, Switchgear and controlgear, Electronic tubes, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Electronic display devices, Lamps and related equipment, Testing of metals, Electromagnetic compatibility (EMC), Aircraft and space vehicles in general, Integrated circuits. Microelectronics, Galvanic cells and batteries, Power transmission and distribution networks, Surface treatment and coating, Paints and varnishes, Electrical accessories, Installations in buildings, Environmental protection, Products of the chemical industry, Electrical wires and cables, Coatings and related processes used in aerospace industry, Electrical engineering in general, Materials for the reinforcement of composites, Chipless working equipment, Wastes, Iron and steel products.
SE-SIS, Three-electrode electrode holder
International Organization for Standardization (ISO), Three-electrode electrode holder
- ISO 5827:1983 Spot welding; Electrode back-ups and clamps
- ISO 20168:2016 Resistance welding - Locking tapers for electrode holders and electrode caps
- ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
- ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
- ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
- ISO 8430-1:1988 Resistance spot welding; electrode holders; part 1: taper fixing 1:10
- ISO 8430-2:1988 Resistance spot welding; electrode holders; part 2: Morse taper fixing
- ISO 24598:2019 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification
- ISO 5184:1979 Straight resistance spot welding electrodes
- ISO 2311:1972 Electrolytic cathode copper
- ISO 5830:1984 Resistance spot welding; Male electrode caps
- ISO 8430-3:1988 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust
- ISO 5821:1979 Resistance spot welding electrode caps
- ISO 5183:1979 Resistance spot welding electrode adaptors
BE-NBN, Three-electrode electrode holder
- NBN-EN 25827-1992 Spot welding. Electrode back-ups and clamps (ISO 5827:1983)
- NBN-EN 28430-2-1992 Resistance spot welding. Electrode holders. Part 2: Morse taper fixing (ISO 8430-2:1988)
Association Francaise de Normalisation, Three-electrode electrode holder
European Committee for Standardization (CEN), Three-electrode electrode holder
- EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- EN 25827:1992 Spot Welding - Electrode Back-Ups and Clamps
- EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984)
- EN 28430-3:1992 Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing
- EN 28430-1:1992 Resistance Spot Welding - Electrode Holders - Part 1 : Taper Fixing 1:10
British Standards Institution (BSI), Three-electrode electrode holder
- BS ISO 20168:2016 Resistance welding. Locking tapers for electrode holders and electrode caps
- BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes
- BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps
- BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10
- BS EN 25827:1992 Specification for spot welding. Electrode back-ups and clamps
- BS 7310:1990 Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution
- BS EN ISO 8430-3:2016 Resistance spot welding. Electrode holders. Parallel shank fixing for end thrust
- BS EN ISO 20168:2021 Resistance welding. Locking tapers for electrode holders and electrode caps
- BS EN 28430-3:1992 Specification for resistance spot welding - Electrode holders - Parallel shank fixing for end thrust
- PD IEC/TS 62607-4-5:2017 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterization, 3-electrode cell method
- BS 2586:1979 Specification for glass and reference electrodes for the measurement of pH
- BS EN ISO 8430-2:2016 Resistance spot welding. Electrode holders. Morse taper fixing
- BS EN 25184:1995 Straight resistance spot welding electrodes
- BS EN ISO 5830:2021 Resistance spot welding. Male electrode caps
- BS 558 and 564:1970 Specifications for nickel anodes, anode nickel and nickel salts for electroplating
- BS EN 28430-2:1992 Specification for resistance spot welding - Electrode holders - Morse taper fixing
- BS EN ISO 8430-1:2016 Resistance spot welding. Electrode holders. Taper fixing 1:10
- BS EN ISO 5821:2009 Resistance welding - Spot welding electrode caps
- BS 807:1955 Specification for spot welding electrodes
- PD 6536-1992 Extra-low voltage (ELV). Limit values
IT-UNI, Three-electrode electrode holder
German Institute for Standardization, Three-electrode electrode holder
- DIN EN ISO 20168:2021-03 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German version EN ISO 20168:2021
- DIN 41700-2:1989 Electrical communication engineering; three pole plug
- DIN ISO 5827:1989 Spot welding; electrode back-up and clamps; identical with ISO 5827:1983 (status as of 1985)
- DIN EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German version EN ISO 20168:2021
- DIN EN 28430-2:1992 Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988); german version EN 28430-2:1992
- DIN EN 28430-1:1992 Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988); german version EN 28430-1:1992
- DIN EN ISO 8430-2:2016-12 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016); German version EN ISO 8430-2:2016
- DIN EN ISO 8430-1:2016-12 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016); German version EN ISO 8430-1:2016
- DIN 41700:1959 Electric communication engineering; three-pole plug, 5.75 mm diameter
- DIN EN 28430-3:1992 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988); german version EN 28430-3:1992
- DIN ISO 5184:1984 Straight resistance spot welding electrodes
- DIN ISO 5184:1984-04 Straight resistance spot welding electrodes
- DIN EN ISO 5830:2021-03 Resistance spot welding - Male electrode caps (ISO 5830:1984); German version EN ISO 5830:2021
- DIN EN ISO 5821:2010-04 Resistance welding - Spot welding electrode caps (ISO 5821:2009); German version EN ISO 5821:2009
- DIN 18014:1994 Foundation earth electrode
未注明发布机构, Three-electrode electrode holder
- ISO 5827:1983/Cor 1:1985 Spot welding electrode holder and electrode clamp technical errata 1
- BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution
- BS EN 25184:1995(1999) Straightresistance spot welding electrodes
Korean Agency for Technology and Standards (KATS), Three-electrode electrode holder
AT-ON, Three-electrode electrode holder
Danish Standards Foundation, Three-electrode electrode holder
Lithuanian Standards Office , Three-electrode electrode holder
- LST EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- LST EN 25827-2000 Spot welding - Electrode back-ups and clamps (ISO 5827:1983)
PL-PKN, Three-electrode electrode holder
Professional Standard - Machinery, Three-electrode electrode holder
KR-KS, Three-electrode electrode holder
- KS C ISO 5827-2016 Spot welding-Electrode back-ups and clamps
- KS B ISO 5184-2022 Straight resistance spot welding electrodes
- KS B ISO 26304-2016 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification
- KS B ISO 24598-2018 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels — Classification
Professional Standard - Aviation, Three-electrode electrode holder
Professional Standard - Electron, Three-electrode electrode holder
- SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors
- SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
- SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
- SJ/T 11140-1997 Electrode foil for aluminum electrolytic capacitor
- SJ/T 11140-2012 Electrode foil for aluminum electrolytic capacitor
- SJ/T 11140-2022 Electrode foil for aluminum electrolytic capacitors
- SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
- SJ 363-1973 Measurement of reflector total current, reflector ion current and reflector leakage current of reflex klystrons
- SJ/T 10985-1996 Methods for designation of electrostatic deflecting electrodes of cathode-ray tubes
- SJ 1389-1978 Methods of measurement for diodes leakage current between electrodes of noise-generator diodes
- SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes
ZA-SANS, Three-electrode electrode holder
International Electrotechnical Commission (IEC), Three-electrode electrode holder
- IEC 60974-11:2021 RLV Arc welding equipment - Part 11: Electrode holders
- IEC 60974-11:2021 Arc welding equipment - Part 11: Electrode holders
- IEC 60236:1974 Methods for the designation of electrostatic deflecting electrodes of cathode-ray tubes
- IEC TS 62607-4-5:2017 Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization, 3-electrode cell method
AENOR, Three-electrode electrode holder
Defense Logistics Agency, Three-electrode electrode holder
- DLA A-A-55168 D-2012 FUSEHOLDER, BLOCK, CLASS H, 30 AMPERE, 250 V AC, ONE, TWO, AND THREE POLE
- DLA A-A-55426 D-2012 FUSEHOLDER, BLOCK, CLASS H, 60 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
- DLA A-A-55427 D-2012 FUSEHOLDER, BLOCK, CLASS H, 60 AMPERE, 250 V AC, ONE, TWO, AND THREE POLE
- DLA A-A-55428 D-2012 FUSEHOLDER, BLOCK, CLASS H, 30 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
- DLA A-A-55429 D-2012 FUSEHOLDER, BLOCK, CLASS H, 100 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
- DLA MIL-DTL-55422 B-2011 CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR
- DLA A-A-50877 A-1988 ELECTRODE, ELECTROSURGICAL APPARATUS
- DLA DSCC-DWG-05017 REV B-2012 CAPACITORS, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM ANODE AND CATHODE
- DLA MIL-DTL-3950/16 A-2008 SWITCHES, TOGGLE, THREE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED
- DLA SMD-5962-87542 REV B-2001 MICROCIRCUIT, DIGITAL, BIPOLAR THREE-STATE PRIORITY ENCODER, MONOLITHIC SILICON
- DLA MIL-DTL-83731/24 A-2008 SWITCHES, TOGGLE, THREE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED
- DLA SMD-5962-97579 REV A-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, TRIPLE 3-INPUT POSITIVE NAND GATE, MONOLITHIC SILICON
- DLA MS39026 REV A VALID NOTICE 3-2008 Hanger, Cable (Pole Line)
- DLA SMD-5962-87542 REV C-2009 MICROCIRCUIT, DIGITAL, BIPOLAR, THREE-STATE PRIORITY ENCODER, MONOLITHIC SILICON
- DLA A-A-51187 B VALID NOTICE 1-2006 WELDING TORCHES AND COMPONENT PARTS, GAS TUNGSTEN ARC WELDING (GTAW)
- DLA A-A-51187 B-2001 WELDING TORCHES AND COMPONENT PARTS, GAS TUNGSTEN ARC WELDING (GTAW)
- DLA MIL-DTL-8971 D VALID NOTICE 1-2008 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE
- DLA MIL-DTL-8971 D (1)-2009 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE
- DLA QPL-8971-QPD-2010 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE
- DLA MIL-DTL-8971 E-2011 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE
- DLA QPL-8971-2013 Electrodes, Graphite, Spectrometric Grade
Taiwan Provincial Standard of the People's Republic of China, Three-electrode electrode holder
Canadian Standards Association (CSA), Three-electrode electrode holder
HU-MSZT, Three-electrode electrode holder
AWS - American Welding Society, Three-electrode electrode holder
- A5.12-1980 SPECIFICATION FOR TUNGSTEN ARC WELDING ELECTRODES
工业和信息化部, Three-electrode electrode holder
- YS/T 1193-2017 Cathode plate insulation sealing edge strip for electrolysis
- YS/T 1312-2019 Molybdenum electrode
- JB/T 2224-2018 Technical conditions of large three-phase four-pole synchronous motor
- YS/T 1338-2019 Capacitor electrode nickel powder
- XB/T 702-2022 Three-electrode system test method for testing the electrochemical properties of rare earth hydrogen storage alloy powder for metal hydride-nickel battery negative electrodes
- YS/T 65-2019 Cathode paste for aluminum electrolysis
RU-GOST R, Three-electrode electrode holder
- GOST 18604.27-1986 Power high-voltage bipolar transistors. Collector-base (emitter-base) breakdown voltage measurement at emitter (collector) cut-off current
- GOST 17792-1972 Standarde reference silver-silver cloride saturate electrode of second class
- GOST 19138.2-1985 Triode thyristors. Method for measuring trigger direct and peak gate current and trigger direct and peak gate voltage
- GOST 21107.9-1976 Gas-discharge devices. Methods of measurement of electrial parameters of pulse thyratrons
- GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
- GOST 19438.12-1975 Low-power electronic tubes and valves. Methods of measurement of plate current and currents of grids having positive potential
- GOST 2132-1990 Nicel anodes. Specifications
- GOST 21106.6-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Measurement methods of currents of anode and grids, having positive voltage relative to cathode and zero anode and grids currents
- GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
- GOST 26169-1984 Radioelectronic equipment electromagnetic compatibility. High-power bipolar high-frequency linear transistors intermodulation component coefficient standards
- GOST R 59566-2021 Nanomanufacturing. Key control characteristics. Part 4-5. Cathode nanomaterials for nano-enabled electrical energy storage. Determination of electrochemical characteristics with 3-electrode cell
CZ-CSN, Three-electrode electrode holder
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-electrode electrode holder
ES-UNE, Three-electrode electrode holder
Electronic Components, Assemblies and Materials Association, Three-electrode electrode holder
RO-ASRO, Three-electrode electrode holder
Professional Standard - Ferrous Metallurgy, Three-electrode electrode holder
Standard Association of Australia (SAA), Three-electrode electrode holder
- AS 2203.1:1990 Cored electrodes for arc welding Part 1: Ferritic steel electrodes
- AS/NZS 2717.1:1996 Welding - Electrodes - Gas metal arc - Ferritic steel electrodes
National Electrical Manufacturers Association(NEMA), Three-electrode electrode holder
- NEMA GR 1-2007 GROUNDING ROD ELECTRODES AND GROUNDING ROD ELECTRODE COUPLINGS
- NEMA GR 1-2001 Grounding Rod Electrodes and Grounding Rod Electrode Couplings Errata
- NEMA CG 1-2013 MANUFACTURED GRAPHITE/CARBON ELECTRODES
NEMA - National Electrical Manufacturers Association, Three-electrode electrode holder
Group Standards of the People's Republic of China, Three-electrode electrode holder
Professional Standard - Chemical Industry, Three-electrode electrode holder
- HG/T 3679-2000 Ruthenium trichloride for dimensionally stable anode coating in electrolyzer
- HG/T 3679-2011 Ruthenium trichloride for dimensionally stable anode coating in electrolyzer
- HG/T 4592-2014 Electrode active coating of dimensionally stable anode electrolyzer use membrane method
- HG/T 3952-2007 Cathodic electrodeposition coatings
Japanese Industrial Standards Committee (JISC), Three-electrode electrode holder
Indonesia Standards, Three-electrode electrode holder
Military Standards (MIL-STD), Three-electrode electrode holder
- DOD A-A-51320-1985 ELECTRODE, ELECTROCARDIOGRAPH
- DOD A-A-51390 A-1986 WIRE, ELECTRODE, PATIENT
- DOD A-A-51597 A-1990 ELECTRODE, ELECTROCARDIOGRAPH
- DOD A-A-54831-1993 ELECTRODE, ELECTROCARDIOGRAPH
- DOD A-A-50902 A-1988 HANDLE, ELECTRODE, ELECTROSURGERY
- DOD A-A-51634-1986 HANDLE-ELECTRODE, ELECTROSURGERY
- DOD A-A-51986 A-1988 HANDLE, ELECTRODE, ELECTROSURGERY
- DOD A-A-53805-1989 ELECTRODE SET, ELECTROCARDIOGRAPH
- DOD A-A-54881-1993 ELECTRODE ASSEMBLY, FETAL
- DOD A-A-54849-1993 ELECTRODE, GROUNDING, ELECTROSURGICAL
Association of German Mechanical Engineers, Three-electrode electrode holder
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Three-electrode electrode holder
Institute of Electrical and Electronics Engineers (IEEE), Three-electrode electrode holder
Aerospace, Security and Defence Industries Association of Europe (ASD), Three-electrode electrode holder
- ASD-STAN PREN 2996-005-2005 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Current 1 A to 25 A Part 005: With Polarized Signal Contact Product Standard (Edition P 3)
Professional Standard - Non-ferrous Metal, Three-electrode electrode holder
Beijing Provincial Standard of the People's Republic of China, Three-electrode electrode holder
IN-BIS, Three-electrode electrode holder
Shanghai Provincial Standard of the People's Republic of China, Three-electrode electrode holder
American Welding Society (AWS), Three-electrode electrode holder
- AWS A5.13-2000 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
- AWS A5.5/A5.5M-2006 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
- AWS A5.3/A5.3M-1999 Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding
Professional Standard - Military and Civilian Products, Three-electrode electrode holder
- WJ 2100-2004 Test method for silicon photodiodes and silicon avalanche photodiodes
(U.S.) Ford Automotive Standards, Three-electrode electrode holder
Society of Automotive Engineers (SAE), Three-electrode electrode holder
AR-IRAM, Three-electrode electrode holder
U.S. Military Regulations and Norms, Three-electrode electrode holder
American Society for Testing and Materials (ASTM), Three-electrode electrode holder
- ASTM G59-97 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
- ASTM C783-85(2005) Standard Practice for Core Sampling of Graphite Electrodes
Professional Standard - Medicine, Three-electrode electrode holder
National Metrological Verification Regulations of the People's Republic of China, Three-electrode electrode holder
- JJG(电子) 04026-1989 BJ2985 type crystal triode maintenance voltage tester verification regulations
General Motors Corporation (GM), Three-electrode electrode holder
GM North America, Three-electrode electrode holder
中国有色金属工业总公司, Three-electrode electrode holder
- YS 65-1993 Cathode paste for aluminum electrolysis