ZH
RU
ES
Clip electrode clip
Clip electrode clip, Total:461 items.
In the international standard classification, Clip electrode clip involves: Welding, brazing and soldering, Non-ferrous metals, Hand-held tools, Clothes, Power transmission and distribution networks, Aircraft and space vehicles in general, Fasteners, Telecommunication systems, Shipbuilding and marine structures in general, Electric traction equipment, Protection against electric shock, Machine tool systems, Installations in buildings, Rails and railway components, Electrical accessories, Body care equipment, Aerospace electric equipment and systems, Mining equipment, Cutting tools, Iron and steel products, Screw threads, Electromechanical components for electronic and telecommunications equipment, Cinematography, Testing of metals, Electrical wires and cables, Glass, Rotating machinery, Vocabularies, Road vehicle systems, Pipeline components and pipelines, Protective equipment, Electricity. Magnetism. Electrical and magnetic measurements, Test conditions and procedures in general, Materials and components for railway engineering, Materials for aerospace construction, Electrical equipment for working in special conditions, Electronic components in general, Terminology (principles and coordination).
SE-SIS, Clip electrode clip
International Organization for Standardization (ISO), Clip electrode clip
- ISO 5827:1983 Spot welding; Electrode back-ups and clamps
- ISO 20168:2016 Resistance welding - Locking tapers for electrode holders and electrode caps
- ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
- ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
- ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
- ISO 8430-1:1988 Resistance spot welding; electrode holders; part 1: taper fixing 1:10
- ISO 8430-2:1988 Resistance spot welding; electrode holders; part 2: Morse taper fixing
- ISO 9655:2004 Pliers and nippers for electronics - Single-purpose pliers - Pliers for gripping and manipulating
- ISO 9655:1989 Pliers and nippers for electronics; single-purpose pliers; pliers for gripping and manipulating
- ISO 8430-3:1988 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust
- ISO 8430-3:1988/Cor 1:1990 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1
- ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
- ISO 9656:2004 Pliers and nippers for electronics - Test methods
- ISO 9656:1989 Pliers and nippers for electronics - Test methods
- ISO 9657:2004 Pliers and nippers for electronics - General technical requirements
- ISO 9654:2004 Pliers and nippers for electronics - Single-purpose nippers - Cutting nippers
- ISO 9657:1989 Pliers and nippers for electronics; general technical requirements
- ISO 9654:1989 Pliers and nippers for electronics; single-purpose nippers; cutting nippers
- ISO 3653:1978 Cinematography; Spindles for 8 mm Type S motion-picture projector reels/spools; Dimensions
- ISO 8979:1988 Pliers and nippers for electronics; nomenclature
Korean Agency for Technology and Standards (KATS), Clip electrode clip
BE-NBN, Clip electrode clip
- NBN-EN 25827-1992 Spot welding. Electrode back-ups and clamps (ISO 5827:1983)
- NBN 843-1971
- NBN-EN 28430-2-1992 Resistance spot welding. Electrode holders. Part 2: Morse taper fixing (ISO 8430-2:1988)
- NBN-EN 28430-3-1992 Resistance spot welding. Electrode holders. Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
- NBN-EN 28430-1-1992 Resistance spot welding. Electrode holders. Part 1: Taper fixing 1:10 (ISO 8430-1:1988)
Association Francaise de Normalisation, Clip electrode clip
European Committee for Standardization (CEN), Clip electrode clip
- EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- EN 25827:1992 Spot Welding - Electrode Back-Ups and Clamps
- EN 28430-3:1992 Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing
- EN 28430-1:1992 Resistance Spot Welding - Electrode Holders - Part 1 : Taper Fixing 1:10
British Standards Institution (BSI), Clip electrode clip
- BS ISO 20168:2016 Resistance welding. Locking tapers for electrode holders and electrode caps
- BS EN 25827:1992 Specification for spot welding. Electrode back-ups and clamps
- BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps
- BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes
- BS EN ISO 8430-3:2016 Resistance spot welding. Electrode holders. Parallel shank fixing for end thrust
- BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10
- BS EN ISO 8430-2:2016 Resistance spot welding. Electrode holders. Morse taper fixing
- BS ISO 9655:2004 Pliers and nippers for electronics - Single-purpose nippers - Pliers for gripping and manipulating
- BS EN 28430-3:1992 Specification for resistance spot welding - Electrode holders - Parallel shank fixing for end thrust
- BS EN 28430-2:1992 Specification for resistance spot welding - Electrode holders - Morse taper fixing
- BS EN ISO 8430-1:2016 Resistance spot welding. Electrode holders. Taper fixing 1:10
- BS EN 61914:2009 Cable cleats for electrical installations
- BS EN 61914:2016 Cable cleats for electrical installations
- BS EN 50368:2003 Cable cleats for electrical installations
- BS EN 28430-1:1992 Specification for resistance spot welding - Electrode holders - Taper fixing 1:10
- BS EN 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness
- BS EN 60974-13:2011 Arc welding equipment. Welding clamp
- BS EN 60512-17-4:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
- 19/30390219 DC BS EN IEC 61914. Cable cleats for electrical installations
- BS EN 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
- BS EN 60512-17-2:2011 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
- BS ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
- BS EN IEC 61914:2021 Tracked Changes. Cable cleats for electrical installations
- BS EN 61236:1994 Saddles, pole clamps (stick clamps) and accessories for live working
- BS ISO 9656:2004 Pliers and nippers for electronics - Test methods
- BS EN 61236:2011 Live working. Saddles, stick clamps and their accessories
- BS 951:1999 Electrical earthing - Clamps for earthing and bonding - Specification
- BS 951:2009 Electrical earthing - Clamps for earthing and bonding - Specification
- BS EN IEC 60974-13:2021 Arc welding equipment. Welding current return clamp
- BS ISO 9654:2004 Pliers and nippers for electronics - Single purpose nippers - Cutting nippers
- BS ISO 9657:2004 Pliers and nippers for electronics - General technical requirements
- BS EN 4612-002:2019 Tracked Changes. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. General
Professional Standard - Machinery, Clip electrode clip
Danish Standards Foundation, Clip electrode clip
- DS/EN 25827:1992 Spot welding. Electrode back-ups and clamps
- DS/ISO 5827:1992 Spot welding - Electrode back-ups and clamps
- DS/EN ISO 20168:2021 Resistance welding – Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- DS/EN 61914:2009 Cable cleats for electrical installations
- DS/ISO 8430-3:1992 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
- DS/EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
- DS/EN 61236:2011 Live working - Saddles, stick clamps and their accessories
- DS/EN 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
- DS/EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
- DS/EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
KR-KS, Clip electrode clip
IT-UNI, Clip electrode clip
未注明发布机构, Clip electrode clip
- ISO 5827:1983/Cor 1:1985 Spot welding electrode holder and electrode clamp technical errata 1
- SAE AS23190/1A-201705 STRAPS@ CLAMPS@ AND MOUNTING HARDWARE@ PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP@ LOOP@ NYLON@ ADJUSTABLE@ WIRE SUPPORT@ TYPE III@ CLASS 1
German Institute for Standardization, Clip electrode clip
- DIN EN ISO 20168:2021-03 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German version EN ISO 20168:2021
- DIN ISO 5827:1989 Spot welding; electrode back-up and clamps; identical with ISO 5827:1983 (status as of 1985)
- DIN 6341-2:1993-10 Draw-in collets; thread of the collets; nominal size, limit deviations
- DIN ISO 9655:2006 Pliers and nippers for electronics - Single-purpose pliers - Pliers for gripping and manipulating (ISO 9655:2004) English version of DIN ISO 9655:2006-09
- DIN EN 28430-2:1992 Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988); german version EN 28430-2:1992
- DIN EN 28430-1:1992 Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988); german version EN 28430-1:1992
- DIN EN ISO 8430-2:2016-12 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016); German version EN ISO 8430-2:2016
- DIN EN ISO 8430-1:2016-12 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016); German version EN ISO 8430-1:2016
- DIN EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016); German version EN ISO 20168:2021
- DIN 43147-3:1985 Electric traction; dropper clamp; sliding dropper clamp for catenaries
- DIN 43147-3:1985-12 Electric traction; dropper clamp; sliding dropper clamp for catenaries
- DIN EN 28430-3:1992 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988); german version EN 28430-3:1992
- DIN ISO 5827:1989-08 Spot welding; electrode back-up and clamps; identical with ISO 5827:1983 (status as of 1985)
- DIN 46227:1960 Cable clamp sockets for copper conductors
- DIN 48335:1944 Power current and telecommunication overhead lines; wire rope clamps
- DIN 47626:1990-04 Sheath-clamps for telecommunication cables; requirements, tests
- DIN 71985-3:1982-08 Nipples for cables for controls; clamping nipples
- DIN 48335:1944-05 Power current and telecommunication overhead lines; wire rope clamps
- DIN 46227:1960-11 Cable clamp sockets for copper conductors
- DIN EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016); German version EN ISO 8430-2:2016
- DIN EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016); German version EN ISO 8430-1:2016
- DIN ISO 9656:2006 Pliers and nippers for electronics - Test methods (ISO 9656:2004) English version of DIN ISO 9656:2006-09
- DIN 48342:1947 Strain clamp for steel ropes
- DIN ISO 8979:2006 Pliers and nippers for electronics - Nomenclature (ISO 8979:2004)
- DIN ISO 9657:2006 Pliers and nippers for electronics - General technical requirements (ISO 9657:2004) English version of DIN ISO 9657:2006-09
- DIN 41611-4 Berichtigung 1:2018-12 Solderless electrical connections - Clip connections - Terminology, requirements, testing; Corrigendum 1
- DIN 41611-4:1986-04 Solderless electrical connections; clip connections; terminology, requirements, testing
- DIN EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016); German version EN ISO 8430-3:2016
AT-ON, Clip electrode clip
ZA-SANS, Clip electrode clip
International Electrotechnical Commission (IEC), Clip electrode clip
- IEC 60974-11:2021 RLV Arc welding equipment - Part 11: Electrode holders
- IEC 60974-11:2021 Arc welding equipment - Part 11: Electrode holders
- IEC 61914:2021 Cable cleats for electrical installations
- IEC 61914:2021 CMV Cable cleats for electrical installations
- IEC 61914:2015 Cable cleats for electrical installations
- IEC 61914:2009 Cable cleats for electrical installations
- IEC 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
- IEC 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
- IEC 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
- IEC 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
Lithuanian Standards Office , Clip electrode clip
- LST EN ISO 20168:2021 Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- LST EN 25827-2000 Spot welding - Electrode back-ups and clamps (ISO 5827:1983)
- LST EN 61914-2009 Cable cleats for electrical installations (IEC 61914:2009)
- LST EN 61914-2009/AC-2009 Cable cleats for electrical installations (IEC 61914:2009)
- LST EN 28430-3-2000 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
- LST EN 60512-17-1-2011 Connectors for electronic equipment - Tests and measurements -- Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (IEC 60512-17-1:2010)
- LST EN 60512-17-3-2011 Connectors for electronic equipment - Tests and measurements -- Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (IEC 60512-17-3:2010)
- LST EN 61236-2011 Live working - Saddles, stick clamps and their accessories (IEC 61236:2010)
- LST EN 60512-17-4-2011 Connectors for electronic equipment - Tests and measurements -- Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (IEC 60512-17-4:2010)
- LST EN 60512-17-2-2011 Connectors for electronic equipment - Tests and measurements -- Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (IEC 60512-17-2:2011)
PL-PKN, Clip electrode clip
- PN-EN ISO 20168-2021-07 E Resistance welding -- Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
- PN M69161-1990 Welding Insulated electrode hold?rs for manua? welding Re?uirements and tests
- PN P97202-1961 Elec?rical Insula?ing Paper - In?erlayer Type ?or Transformers
AENOR, Clip electrode clip
U.S. Air Force, Clip electrode clip
Defense Logistics Agency, Clip electrode clip
- DLA MIL-DTL-55422 B-2011 CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR
- DLA MS27405 REV A NOTICE 2-1997 CLAMP - TUBE
- DLA MS27405 REV A VALID NOTICE 1-1986 CLAMP - TUBE
- DLA MS27405 REV A-1971 CLAMP - TUBE
- DLA DESC-DWG-84049-1984 CLIP, ELECTRICAL
- DLA MS39046 REV A VALID NOTICE 2-2003 CLAMP, ELECTRICAL, LASHING (POLE LINE)
- DLA MS39046 REV A-1968 CLAMP, ELECTRICAL, LASHING (POLE LINE)
- DLA MS17815 REV B VALID NOTICE 2-2012 Clamp, Cable, Aviation Ground Lights
- DLA MS90561 REV G-2007 GRIP, CABLE, WOVEN, STRAIN RELIEF, AXIAL
- DLA A-A-55507 A-2001 CLIP, ELECTRICAL, FUSE, GENERAL REQUIREMENTS FOR
- DLA DSCC-DWG-89029 REV A-2003 HOLDER, ELECTRICAL CARD, CARD GUIDE, CONDUCTIVE PLASTIC, ANTI-VIBRATION
- DLA MIL-DTL-83413/7 C VALID NOTICE 1-2010 Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Clip, Electrical
- DLA MIL-DTL-83413/7 D-2011 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: GROUNDING CLAMP CONNECTOR FOR TYPES I AND III GROUNDING ASSEMBLIES, CLIP, ELECTRICAL
- DLA MIL-DTL-83413/7 E-2012 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: GROUNDING CLAMP CONNECTOR FOR TYPES I AND III GROUNDING ASSEMBLIES, CLIP, ELECTRICAL
- DLA MIL-DTL-83413/7 E (1)-2013 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: GROUNDING CLAMP CONNECTOR FOR TYPES I AND III GROUNDING ASSEMBLIES, CLIP, ELECTRICAL
- DLA MS25471 REV F-2011 WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600 VOLT, 200 DEG. C, POLYESTER JACKET
工业和信息化部, Clip electrode clip
- YS/T 1193-2017 Cathode plate insulation sealing edge strip for electrolysis
United States Navy, Clip electrode clip
- NAVY MIL-J-82299 C-1988 JACKET, EXTREME COLD WEATHER, IMPERMEABLE
- NAVY MIL-F-81959 VALID NOTICE 1-1988 FIXTURE, CABLE MAINTENANCE MX-9516/ASQ-81(V)
- NAVY MIL-F-81959-1974 FIXTURE, CABLE MAINTENANCE MX-9516/ASQ-81(V)
- NAVY MS14109 REV A NOTICE 2-1997 FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
- NAVY MS14109 REV A VALID NOTICE 1-1991 FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
- NAVY MS14109 REV A-1972 FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
Professional Standard - Coal, Clip electrode clip
Society of Automotive Engineers (SAE), Clip electrode clip
- SAE AGS1541-6-1925 AGS1541 Electric Cable Cleats
- SAE AGS1564-11-1946 AGS1564 Cable Bonding Clamps
- SAE AGS1500-10-1946 AGS1500 Cable Bonding Clamps
- SAE TS376-1-1990 TS376 Cable Clamp Effectiveness
- SAE AS2813-2-1949 AS2813 Cable Clip (Filler Cap)
- SAE AS5117-2000 Clip, Spring Retention - Electrical Cable FSC 5340
- SAE AS4799-2-1954 AS4799 Spring Clip (Cable Duct)
- SAE AS5117-2013 CLIP, SPRING RETENTION - ELECTRICAL CABLE
- SAE AS4822-2-1951 AS4822-4825 Spring Clip (Cable Duct)
- SAE AGS1560-14-1946 AGS1560 Bonding Clamps for Metal Braided Cables
- SAE AS81824C-2013 Splice, Electric, Crimp, Copper, Environment Resistant
- SAE J163-2011 Low Tension Wiring and Cable Terminals and Splice Clips (Stabilized Type)
- SAE J163-2006 Low Tension Wiring and Cable Terminals and Splice Clips
- SAE J163-2001 Low Tension Wiring and Cable Terminals and Splice Clips
- SAE AGS1558-14-1946 AGS1558 Bonding Clamps for Metal Braided Cables
- SAE AGS1534-13-1932 AGS1534 Bonding Clips. (For Sparking Plugs and Generators)
- SAE AS4882A-2013 CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE
- SAE AGS1528-10-1946 AGS1528 Cable Clamps for Single Metal Braided H.T. and L.T. Cables
- SAE AS23190/1-2012 STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, NYLON, ADJUSTABLE, WIRE SUPPORT, TYPE III, CLASS 1
ES-UNE, Clip electrode clip
- UNE-EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
- UNE-EN 61914:2016 Cable cleats for electrical installations
- UNE-EN IEC 61914:2022 Cable cleats for electrical installations
- UNE-EN 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (Endorsed by AENOR in November of 2010.)
- UNE-EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements -- Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (Endorsed by AENOR in November of 2010.)
- UNE-EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (Endorsed by AENOR in September of 2011.)
- UNE-EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements -- Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (Endorsed by AENOR in November of 2010.)
- UNE-EN IEC 60974-13:2021 Arc welding equipment - Part 13: Welding current return clamp (Endorsed by Asociación Española de Normalización in July of 2021.)
Taiwan Provincial Standard of the People's Republic of China, Clip electrode clip
- CNS 14883-2005 Pliers and nippers for electronics - Single-purpose pliers for gripping and manipulating
- CNS 9855-1983 Electric Cable Clips for Marine Use
- CNS 4096-1989 Chucks for Portable Electric Drills
- CNS 6084-1982 Saddle for Rigid Steel Conduit
- CNS 9077-1982 Cables Clamps for Automobiles Lead Storage Batteries
- CNS 14879-2005 Pliers and nippers for electronics - Nomenclature
- CNS 4097-1989 Method of Test for Chuck of Portable Electric Drills
- CNS 14881-2005 Pliers and nippers for electronics - Methods of test
- CNS 14882-2005 Pliers and nippers for electronics - Single-purpose cutting nippers
- CNS 14880-2005 Pliers and nippers for electronics - General technical requirements
- CNS 7597-1981 Malleable Iron Casting Clamp and Aluminium Alloy Casting Clamp for Transmission Line Use
- CNS 6115-1990 Saddles for Unplasticized Polyvinyl Chloride Conduit
Professional Standard - Military and Civilian Products, Clip electrode clip
- WJ 1577-1984 Fixtures for cold processing of optical parts and fixtures for special crafts Anodizing and strengthening fixtures
Institute of Electrical and Electronics Engineers (IEEE), Clip electrode clip
RO-ASRO, Clip electrode clip
CZ-CSN, Clip electrode clip
Professional Standard - Light Industry, Clip electrode clip
TH-TISI, Clip electrode clip
SAE - SAE International, Clip electrode clip
- SAE AS85049/139-2007 BUSHING@ CABLE CLAMP TO CABLE@ TELESCOPING FOR AS85049 CABLE CLAMPS CATEGORY 9
- SAE AS85049/139C-2018 BUSHING@ CABLE CLAMP TO CABLE@ TELESCOPING FOR AS85049 CABLE CLAMPS CATEGORY 9
- SAE AS85049/139B-2017 AS85049 Cable Clamps Telescopic Sleeved Cable Clamps for Category 9 Cables
- SAE AS85049/139A-2012 AS85049 Cable Clamps Telescopic Sleeved Cable Clamps for Category 9 Cables
- SAE AS81824A-2003 Splices@ Electric@ Permanent@ Crimp Style@ Copper@ Insulated@ Environment Resistant
- SAE AS81824-1998 Splices@ Electric@ Permanent@ Crimp Style@ Copper@ Insulated@ Environment Resistant
- SAE AS81824D-2016 Splice, Electric, Crimp, Copper, Environment Resistant
- SAE AS81824E-2018 Splice@ Electric@ Crimp@ Copper@ Environment Resistant
- SAE AS34201-2004 ADAPTER@ CABLE CLAMP TO CABLE@ BUSHING@ TELESCOPING
- SAE AS34201A-2011 ADAPTER@ CABLE CLAMP TO CABLE@ BUSHING@ TELESCOPING
- SAE J163-1974 Low Tension Wiring and Cable Terminals and Splice Clips (January 1974)
- SAE AS4882-1996 Clamp@ Loop@ Cushioned@ Hinged@ Quick Release - Cable or Wire
- SAE AS23190/1A-2017 STRAPS@ CLAMPS@ AND MOUNTING HARDWARE@ PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP@ LOOP@ NYLON@ ADJUSTABLE@ WIRE SUPPORT@ TYPE III@ CLASS 1
Aerospace Industries Association/ANSI Aerospace Standards, Clip electrode clip
- AIA/NAS NAS 481-1951 Clip - Electric Fuse (Rev. 1)
- AIA/NAS NAS 573-1992 Clamp Assembly - Electronic Equipment (Rev. 6)
- AIA/NAS NAS622-2010 HOOK, SUPPORT, ELECTRONIC EQUIPMENT CLAMP Rev 3
- AIA/NAS NAS 574-1992 Pin, Rear Mounting - Electronic Equipment (Rev. 7)
- AIA/NAS NAS573-2011 CLAMP ASSEMBLY, ELECTRONIC EQUIPMENT Rev 7
- AIA/NAS NAS573-2014 CLAMP ASSEMBLY, ELECTRONIC EQUIPMENT (Rev 8)
- AIA/NAS NAS 650-1964 Terminal, Turnbuckle Cable Clip Locking (Rev. 2)
- AIA/NAS NASM21334-1998 Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned
- AIA/NAS NAS622-2014 HOOK, SUPPORT, ELECTRONIC EQUIPMENT CLAMP (Rev 4)
- AIA/NAS NASM21334-2015 CLAMP, LOOP, DOUBLE, CABLE OR TUBE, STEEL, PLAIN AND CUSHIONED (Rev 2)
Professional Standard - Nuclear Industry, Clip electrode clip
Japanese Industrial Standards Committee (JISC), Clip electrode clip
- JIS E 2206:1989 Splicing fittings for overhead contact system of electric railway
- JIS E 2209:1989 Wire clips for overhead contact system of electric railway
- JIS C 3701:1994 Casting clamps for power line use
- JIS B 4634:1995 Chucks for portable electric drills
- JIS C 9300-13:2014 Arc welding equipment -- Part 13: Welding clamp
- JIS C 5402-17-1:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-1: Cable clamping tests -- Test 17a: Cable clamp robustness
- JIS C 5402-17-2:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-2: Cable clamping tests -- Test 17b: Cable clamp resistance to cable rotation
- JIS C 5402-17-4:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-4: Cable clamping tests -- Test 17d: Cable clamp resistance to cable torsion
- JIS C 5402-17-3:2018 Connectors for electronic equipment -- Tests and measurements -- Part 17-3: Cable clamping tests -- Test 17c: Cable clamp resistance to cable pull (tensile)
- JIS E 2207:1989 Fittings for feeder in overhead contact system of electric railway
- JIS E 2205:1989 Hanger fittings for overhead contact system of electric railway
CENELEC - European Committee for Electrotechnical Standardization, Clip electrode clip
- EN 50368:2003 Cable cleats for electrical installations
- EN 61236:1995 Saddles@ Pole Clamps (Stick Clamps) and Accessories for Live Working
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Clip electrode clip
Group Standards of the People's Republic of China, Clip electrode clip
RU-GOST R, Clip electrode clip
- GOST R IEC 61914-2015 Cable cleats for electrical installation
- GOST 28400-1989 Electric household curling irons and curling combs. General specifications
- GOST 24720-1981 Brush holders for electrical machines. General specifications
- GOST 27370-1987 Brush-holders for slip-rings group R type RA
- GOST 14651-1978 Electrode holders for manual arc welding. Specifications
- GOST 21099-1975 Rotating electrical machinery. Brush holders and brackets. Serrations on fixing surface. Shapes and dimensions
- GOST 17565-1972 Electrical magazines for signal rockets. Types and basic characteristics
- GOST 24808-1981 Brush holders and brackets for traction and electrical machines. Serrate rifling. Dimensions
- GOST R 57077-2016 Electric clamp, assembly and split, for the connection of the rails and grounding wires. Technical requirements
European Committee for Electrotechnical Standardization(CENELEC), Clip electrode clip
- EN 61914:2016 Cable cleats for electrical installations
- EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
- EN 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
- EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
- EN 61236:2011 Live working - Saddles, stick clamps and their accessories
- EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
AIA/NAS - Aerospace Industries Association of America Inc., Clip electrode clip
- NAS5573-1992 Clamp Assembly - Electronic Equipment
- NAS622-2014 HOOK@ SUPPORT@ ELECTRONIC EQUIPMENT CLAMP (Rev 4)
- NAS622-2010 HOOK@ SUPPORT@ ELECTRONIC EQUIPMENT CLAMP (Rev 3)
- NAS481-1951 Clip - Electric Fuse (Rev 1)
- NAS573-1992 Clamp Assembly - Electronic Equipment (Rev 6)
- NAS573-2014 CLAMP ASSEMBLY@ ELECTRONIC EQUIPMENT (Rev 8)
- NAS573-2011 CLAMP ASSEMBLY@ ELECTRONIC EQUIPMENT (Rev 7)
- NAS650-1964 Terminal@ Turnbuckle Cable Clip Locking (Rev 2)
- NAS622-1991 Hook@ Support - Electronic Equipment Clamp (NAS 573) (Rev 2)
- NAS171-1978 Clevis - Rod End for Resistance Welding (Rev 2)
- NAS4118-1996 Heat Sink@ Electrical- Electronic Component@ Semiconductor Devices@ Retainer Clip Type
- NAS647-1964 Eye@ Turnbuckle (for Cable) Clip Locking (Rev 4)
国家煤矿安全监察局, Clip electrode clip
Standard Association of Australia (SAA), Clip electrode clip
BR-ABNT, Clip electrode clip
HU-MSZT, Clip electrode clip
CH-SNV, Clip electrode clip
IN-BIS, Clip electrode clip
Underwriters Laboratories (UL), Clip electrode clip
国家市场监督管理总局、中国国家标准化管理委员会, Clip electrode clip
- GB/T 40281-2021 Determination of content of nonmetallic inclusions in steel—Extremum analytical method
Professional Standard - Building Materials, Clip electrode clip
- JC/T 2129-2012 Laminated electron.switchable visibility.control glass functioned by liquid crystal material
Association of German Mechanical Engineers, Clip electrode clip
Aerospace Industries Association, Clip electrode clip
Canadian Standards Association (CSA), Clip electrode clip
American National Standards Institute (ANSI), Clip electrode clip
Professional Standard - Electricity, Clip electrode clip
- DL/T 2320-2021 Specifications for clamps for live working on distribution lines
- DL/T 1190-2012 The insulation piercing connector for rated voltages up to 10 kV
YU-JUS, Clip electrode clip
TR-TSE, Clip electrode clip
- TS 2825-1977 Aluminium Terminal Ends For Crimping To Aircraft Aluminium Electrical Cables
American Society of Mechanical Engineers (ASME), Clip electrode clip
Electronic Components, Assemblies and Materials Association, Clip electrode clip
American Society for Testing and Materials (ASTM), Clip electrode clip
- ASTM F1825-03(2007) Standard Specification for Clampstick Type Live Line Tools
- ASTM F1825-03 Standard Specification for Clampstick Type Live Line Tools
- ASTM F1825-03(2013) Standard Specification for Clampstick Type Live Line Tools
- ASTM E2283-07 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
- ASTM E2283-08(2019) Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
ECIA - Electronic Components Industry Association, Clip electrode clip
- 190-A-1964 Pin Straighteners and Wiring Jigs for Electron Tubes
- 364-43A-1983 TP-43A Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
- EIA-364-43C-2013 TP-43C Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
- EIA/ECA-364-43B-2000 TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
- EIA-364-43B-2000 TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
Electronic Components, Assemblies and Materials Association, Clip electrode clip
- ECA EIA-364-43B-2000 TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
- EIA_ECA-364-43B-2000 TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
- ECA EIA-364-43C-2013 TP-43C Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors
BELST, Clip electrode clip
- STB 1950-2009 The fixture electroassembly. The requirements of fire safety and methods of test