ZH
RU
ES
Characterization of gels
Characterization of gels, Total:74 items.
In the international standard classification, Characterization of gels involves: Pharmaceutics, Air quality, Medical equipment, Rubber and plastics products, Adhesives, Rubber, Structures of buildings, Wood-based panels, Horology, Construction materials, Road engineering, Particle size analysis. Sieving, Coatings and related processes used in aerospace industry, Products of the textile industry, Road vehicle systems, Optics and optical measurements.
American Society for Testing and Materials (ASTM), Characterization of gels
- ASTM F2900-11 Standard Guide for Characterization of Hydrogels used in Regenerative Medicine
- ASTM D6552-06(2021) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
- ASTM D6552-06(2016) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
Association Francaise de Normalisation, Characterization of gels
- NF EN 16897:2017 Exposition sur les lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la concentration en nombre à l'aide de compteurs de particules à condensation
- NF X43-223*NF EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
- NF T76-142*NF T 76-142:2021 Structural adhesives - Preparation method of structural adhesive plates for characterization test pieces
- NF T76-302:1983 Emulsion adhesives (aqueous dispersions). Lists of characterization methods.
- NF T46-046*NF ISO 13226:2018 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- NF S86-604:2015 Horlogerie - Caractérisation des bracelets métalliques pour montres
- NF ISO 13226:2018 Caoutchouc - Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés
- NF EN 14701-4:2018 Caractérisation des boues - Propriétés de filtration - Partie 4 : détermination de l'aptitude à l'égouttage des boues floculées
- XP T43-125*XP ISO/TS 22640 :2019 Rubber - Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- NF G37-137:2007 Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles.
German Institute for Standardization, Characterization of gels
- DIN EN 16897:2017-09 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters; German version EN 16897:2017
- DIN EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
- DIN 7868-2:1984 Rubber and plastics covered rollers; surface characteristics
- DIN ISO 13226:2021-06 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2018)
- DIN EN 14701-4:2019-12 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge; German version EN 14701-4:2018
- DIN EN 12188:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999
ES-UNE, Characterization of gels
- UNE-EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters (Endorsed by Asociación Española de Normalización in October of 2017.)
- UNE 83519:2023 Concrete with fibres. Test method for the characterization of the flexural tensile strength of strain hardened concretes.
- UNE-EN 14701-4:2020 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
CEN - European Committee for Standardization, Characterization of gels
- PREN 16897-2015 Workplace exposure - Characterization of ultrafine aerosols anoaerosols - Determination of number concentration using condensation particle counters
British Standards Institution (BSI), Characterization of gels
- BS EN 16897:2017 Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters
- BS EN 635-5:1999 Plywood - Classification by surface appearance - Methods for measuring and expressing characteristics and defects
- BS EN 12188:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents
- BS EN 14701-4:2018 Tracked Changes. Characterization of sludges. Filtration properties. Determination of the drainability of flocculated sludge
- BS ISO 13473-5:2009 Characteristics of pavement texture by use of surface profiles - Determination of megatexture
- BS EN 17333-1:2020 Characterisation of one component foam - Foam yield characteristics
- BS ISO 6452:2007 Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles
European Committee for Standardization (CEN), Characterization of gels
- EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
- EN 12188:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents
- EN 635-5:1999 Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
国家食品药品监督管理局, Characterization of gels
- YY/T 1435-2016 Guide to Hydrogel Characterization for Tissue Engineering Medical Device Products
ACI - American Concrete Institute, Characterization of gels
- ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin
AENOR, Characterization of gels
SAE - SAE International, Characterization of gels
American Society of Civil Engineers (ASCE), Characterization of gels
- ASCE GSP 146-2006 ASPHALT CONCRETE SIMULATION, MODELING, AND EXPERIMENTAL CHARACTERIZATION
Korean Agency for Technology and Standards (KATS), Characterization of gels
- KS M ISO 10354-2004(2019) Adhesives－Characterization of durability of structural-adhesive-bonded assemblies－Wedge rupture test
- KS M ISO 13226-2007(2017) Rubber－Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers
- KS M ISO 10354:2004 Adhesives－Characterization of durability of structural-adhesive-bonded assemblies－Wedge rupture test
- KS M ISO 6452:2012 Rubber- or plastics-coated fabrics－Determination of fogging characteristics of trim materials in the interior of automobiles
- KS A ISO CIE 19476:2020 Characterization of the performance of illuminance meters and luminance meters
KR-KS, Characterization of gels
- KS M ISO 13226-2022 Rubber Standard reference elastomers(SREs) for characterizing the effect of liquids on vu l canized rubbers
- KS A ISO CIE 19476-2020 Characterization of the performance of illuminance meters and luminance meters
Society of Automotive Engineers (SAE), Characterization of gels
- SAE AMS79/015-2017 Compound, Cleaning Gel for Aircraft Surfaces
- SAE AMS1533-1979 CLEANER FOR EXTERIOR AIRCRAFT SURFACES Gel-Type
- SAE J2643-2004 Standard Reference Elastomers (SRE) for characterizing the effect of Liquids on Vulcanized Rubbers
- SAE J2643-2013 Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers
- SAE AMS1533A-1991 Cleaner For Exterior Aircraft Surfaces Gel-Type, Solvent-Base
- SAE AMS1523B-2008 Cleaner for Exterior Aircraft Surfaces Thickened or Gel-Type, Water-Base
- SAE AMS1533A-2004 Cleaner for Exterior Aircraft Surfaces Gel-Type, Solvent-Base
- SAE J2643-2023 Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers
(U.S.) Ford Automotive Standards, Characterization of gels
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Characterization of gels
- GB/T 42519-2023 Rubber—Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
Standard Association of Australia （SAA）, Characterization of gels
RU-GOST R, Characterization of gels
- GOST 24452-1980 Concretes. Methods of prismatic compressive strength, modulus of elasticity and Poisson's ratio determination
HU-MSZT, Characterization of gels
IX-SA, Characterization of gels
International Organization for Standardization (ISO), Characterization of gels
- ISO 15767:2003 Workplace atmospheres - Controlling and characterizing errors in weighing collected aerosols
- ISO/CD 19996 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
- ISO/DIS 19996:2011 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
- ISO/PRF 22640 Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
- ISO 6452:2007 Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles
PT-IPQ, Characterization of gels
BE-NBN, Characterization of gels
- NBN 136-1951 vereniging zonder winstbejag voorheen Belgische Vereniging voor Standardisatie)
AWS - American Welding Society, Characterization of gels
- CAWF-1983 Characterization of Arc Welding Fume
TIA - Telecommunications Industry Association, Characterization of gels
The American Road & Transportation Builders Association, Characterization of gels
- AASHTO TP 118-2015 Standard Method of Test for Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method
AASHTO - American Association of State Highway and Transportation Officials, Characterization of gels
- TP 118-2017 Standard Method of Test for Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method
- TP 118-2015 Standard Method of Test for Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method