ZH
RU
ES

How to use the strain gauge

How to use the strain gauge, Total:497 items.

In the international standard classification, How to use the strain gauge involves: Testing of metals, Analytical chemistry, Glass, Surface treatment and coating, Fluid storage devices, Measurement of force, weight and pressure, Optical equipment, Road engineering, Non-destructive testing, Construction materials, Mechanical testing, Construction industry, Measurement of volume, mass, density, viscosity, Photography, Railway rolling stock, Energy and heat transfer engineering in general, Plastics, Adhesives, Rubber, Earthworks. Excavations. Foundation construction. Underground works, Shipbuilding and marine structures in general, Magnetic materials, Paints and varnishes, Iron and steel products, Structures of buildings, Company organization and management, Pipeline components and pipelines, Semiconductor devices, Corrosion of metals, Lifting equipment, Industrial automation systems, Measurement of fluid flow, Linear and angular measurements, Measurement of time, velocity, acceleration, angular velocity, Motor cycles and mopeds, Paper and board, Clothes, Footwear, Fuels, Products of the textile industry, Protection against fire, Optics and optical measurements, Nuclear energy engineering, Vibrations, shock and vibration measurements, Waxes, bituminous materials and other petroleum products, Quality, Metrology and measurement in general, Chipless working equipment, Medical equipment, Lubricants, industrial oils and related products, Accident and disaster control, Milk and milk products, Reinforced plastics, Electric traction equipment, Thermodynamics and temperature measurements, Soil quality. Pedology, Protective equipment, Sterilization and disinfection, Electrical wires and cables, Mathematics, Test conditions and procedures in general, Insulating materials, Materials and components for railway engineering, Agricultural machines, implements and equipment, Metalliferous minerals, Radiation measurements, Elements of buildings, Sensory analysis, Products of non-ferrous metals, Electronic tubes, Environmental testing, Fibre optic communications, Automatic controls for household use, Tobacco, tobacco products and related equipment, Protection of and in buildings, Applications of information technology, Fluid power systems, Rubber and plastics products, Air quality, Radiation protection, Environmental protection, Textile fibres, Vocabularies.

Professional Standard - Military and Civilian Products, How to use the strain gauge

WJ 743-1994 Stress test method for adhesives used in optical instruments

工业和信息化部, How to use the strain gauge

WJ/T 743-2014 Glue stress test method for optical instruments
YD/T 3481-2019 Mobile terminal application development security capability assessment method

Indonesia Standards, How to use the strain gauge

SNI 07-6735-2002 Test methods for determining residual stresses by the hole-drilling strain-gage methods
SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI 7881-2013

American Society for Testing and Materials (ASTM), How to use the strain gauge

ASTM E837-99 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-01e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-13 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-08 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-13a Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B636-84(2001) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM E915-96 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-16 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-96(2002) Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM E2245-05 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-02 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D4623-02 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM Borehole Deformation Gage
ASTM D4623-96 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM Borehole Deformation Gage
ASTM D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
ASTM D3929-96e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D3929-03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM B636/B636M-15 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4729-04 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
ASTM D4729-08 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM B636-84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM C1735-17(2021) Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM D4645-87(1997) Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
ASTM E556-95(2006) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
ASTM D8422-21 Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D4645-04 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
ASTM D4645-04e1 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM E556/E556M-11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
ASTM E556/E556M-11(2015) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
ASTM G202-09 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G202-12 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM D971-12 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM E2830-11(2020) Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
ASTM D6896-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM A981/A981M-11 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
ASTM D4633-86 Test Method For Stress Wave Energy Measurment For Dynamic Penetrometer Testing Systems
ASTM D8059-19 Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F2961-14 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D1000-17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D945-92(1997) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM C839-82(2005) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
ASTM C839-82(2010) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM C1196-92(1997) Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
ASTM C1196-20 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
ASTM C1196-14a Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM G139-05(2015) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E854-98 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM D6991-17(2022) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D6874-22 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D6874-21 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM D6874-22a Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM E1426-14 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
ASTM E1488-12(2023) Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
ASTM E2246-02 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2246-05 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2246-11 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E854-14 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM D6132-13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6991-17 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D4729-87(1997) Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
ASTM D6991-05 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D6991-17e1 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM D454-04(2015) Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D6951/D6951M-18 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-18(2023) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM E1005-97 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E1005-15 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM E1005-16 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM E854-03 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM E2435-05 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM E2245-11e1 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2246-11e1 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester
ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM G186-05(2016) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D4729-19 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

AASHTO - American Association of State Highway and Transportation Officials, How to use the strain gauge

DIVISION I 8.15-1996 Service Load Design Method (Allowable Stress Design)
DIVISION I SEC 5-B-1996 Service Load Design Method Allowable Stress Design
DIVISION I SEC 4-B-1996 Service Load Design Method Allowable Stress Design
DIVISION I SEC 7-B-1996 Service Load Design Method Allowable Stress Design (Interim 1997; Interim 2000)
DIVISION I SEC 10-C-1996 Service Load Design Method Allowable Stress Design (Interim 1997; Interim 2000)
T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2009 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2012 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Revision 1)
T245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Nineteenth Edition; ASTM D1559-76)
DIVISION I SEC 5-A&B-1996 General Requirements and Materials - Service Load Design Method Allowable Stress Design (Interim 1997; Interim 1998; Interim 1999; Interim 2000)
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
T 246-2007 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the strain gauge

GB/T 15726-1995 Glassware--stress examination methods
GB/T 31769-2015 Rating specification for applied competence of innovation method
GB/T 12621-2008 Standard test method for stress relaxation of gaskets for pipe flanges
GB/T 12415-1990 Pharmaceutical glass containers--Stress examination--Test methods
GB/T 12415-2015 Test method for internal stress of pharmaceutical glass containers
GB/T 21839-2008 Steel for prestressed concrete.Test methods
GB/T 12085.3-1989 Optics and optical instruments--Environmental test methods--Mechanical stresses
GB/T 3318-2006 Test methods for electric locomotives on completion of construction and before entry into service
GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
GB/T 8000-2001 Brass tube in heat-exchanger--Ammonial test for residual stress corrosion
GB/T 12085.3-2010 Optics and optical instruments.Environmental test methods.Part 3:Mechanical stresses
GB/T 17437-1998 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes

国家市场监督管理总局、中国国家标准化管理委员会, How to use the strain gauge

GB/T 15726-2021 Glassware一Stress examination methods
GB/T 21839-2019 Test methods of steel for prestressing concrete
GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

American National Standards Institute （ANSI), How to use the strain gauge

ANSI/ASTM E915:1996 Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ANSI/ASTM A977:1997 Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ANSI/ASTM E837:2001 Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ANSI/ASTM F1678:1997 Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ANSI/ANS 19.3-2011 Steady-State Neutronics Methods for Power Reactor Analysis
ANSI/ASTM E1488:2012 Guide for Statistical Procedures to Use in Developing and Applying Test Methods
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)

Korean Agency for Technology and Standards (KATS), How to use the strain gauge

KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS B ISO 9022-3:2003 Optics and optical instruments-Environmental test methods-Part 3:Mechanical stress
KS B ISO 9022-3:2013 Optics and optical instruments ― Environmental test methods ― Part 3: Mechanical stress
KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS A 0086-2002(2017) Outgas test method using increasing pressure
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS D 0286-2005(2020) Standard test method for determinig residual stresses by the hole-drilling strain-gage method
KS D ISO 15630-3-2003(2013) Steel for the reinforcement and prestressing of concrete－Test methods－Part 3：Prestressing steel
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS D ISO 15630-3:2003 Steel for the reinforcement and prestressing of concrete-Test methods-Part 3:Prestressing steel
KS M ISO 5630-3:2007 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
KS D ISO 15630-3:2014 Steel for the reinforcement and prestressing of concrete－Test methods－Part 3：Prestressing steel
KS M ISO 5630-3:2017 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS F 2335-1995 Testing methods for resistance to deformation and cohesion of bituminous mixtures by means of Hveem apparatus
KS B ISO 15769:2020 Hydrometry — Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
KS B ISO TS 21432-2017(2022) Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction

Japanese Industrial Standards Committee (JISC), How to use the strain gauge

JIS B 7602:2009 Calibration and test method for force-proving instruments

British Standards Institution (BSI), How to use the strain gauge

BS ISO 9022-3:1998 Optics and optical instruments - Environmental test methods - Mechanical stress
BS 8422:2003 Force measurement - Strain gauge load cell systems - Calibration method
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
BS EN 15305:2008 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS ISO 23048:2018 Ships and marine technology. Verification method for portable power measurement using a strain gauge
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS EN ISO 13165-2:2022 Water quality. Radium-226 - Test method using emanometry
BS EN ISO 13164-3:2020 Water quality. Radon-222 - Test method using emanometry
BS EN ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete - Test methods - Prestressing steel
BS EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel
BS ISO 14824-3:2012 Grout for prestressing tendons. Test methods
BS EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS ISO 15769:2010 Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS EN 445:1997 Grout for prestressing tendons - Test methods
BS EN 445:2007 Grout for prestressing tendons - Test methods
BS ISO 11486:2006+A1:2012 Motorcycles - Methods for setting the running resistance on a chassis dynamometer
BS EN ISO 7539-5:1995 Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS ISO 9337-1:1999 Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
DD CEN/TS 15325:2008 Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
18/30285092 DC BS EN 15273-1. Railway applications. Gauges - Part 1. Generic explanations and methods of gauging
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
BS EN 524-5:1997 Steel strip sheaths for prestressing tendons - Test methods - Determination of tensile load resistance
BS EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
BS 7996:2009 Torque measuring devices - Calibration and classification using continual torque application - Method
BS EN 524-4:1997 Steel strip sheaths for prestressing tendons - Test methods - Determination of lateral load resistance
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
19/30397209 DC BS IEC 60092-350. Electrical installations in ships. Part 350. General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
BS EN ISO 15630-2:2002 Steel for the reinforcement and prestressing of concrete - Test methods - Welded fabric
BS EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete. Test methods. Welded fabric
BS EN 524-2:1997 Steel strip sheaths for prestressing tendons - Test methods - Determination of flexural behaviour
BS 6538-2:1992 Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus
BS 3900-E17:1997 Methods of test for paints - Determination of mar resistance using a curved stylus
BS 3900-E18:1997 Methods of test for paints - Determination of mar resistance using a pointed stylus

RU-GOST R, How to use the strain gauge

PNST 190-2017 Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheelset
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 26954-1986 Agricultural mobile machinery. Method for determining maximum normal stress in soil
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 55404-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determining the effect of heat stress on characteristics of material
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST 8.321-2013 State system for ensuring the uniformity of measurements. Industrial application level gauges. Verification procedure
GOST 30630.0.0-1999 Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators

Inner Mongolia Provincial Standard of the People's Republic of China, How to use the strain gauge

DB15/T 2748-2022 Green power application evaluation method

The American Road & Transportation Builders Association, How to use the strain gauge

AASHTO TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Revision 1
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester

International Organization for Standardization (ISO), How to use the strain gauge

ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 9022-3:1994 Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress
ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel
ISO/CD 15630-3:1972 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel
ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ISO/TS 21432:2005/cor 1:2008 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction; Technical Corrigendum 1
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 18075:2018 Steady-state neutronics methods for power-reactor analysis
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 14824-3:2012 Grout for prestressing tendons - Part 3: Test methods
ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
ISO/CD PAS 5672 Robotics — Collaborative applications — Test methods for measuring forces and pressures in human-robot contacts
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO/DPAS 5672:2023 Robotics — Collaborative applications — Test methods for measuring forces and pressures in human-robot contacts
ISO/PAS 5672:2023 Robotics — Collaborative applications — Test methods for measuring forces and pressures in human-robot contacts
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)

Association Francaise de Normalisation, How to use the strain gauge

NF C96-022-40*NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40 : board level drop test method using a strain gauge
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF EN 60705/A2:2018 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF EN 60705:2015 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
NF A03-720-3*NF EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3 : prestressing steel
NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
NF A05-521*NF ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF EN IEC 60665:2019 Aérateurs à courant alternatif et régulateurs pour applications domestiques et analogues - Méthodes de mesure de l'aptitude à la fonction
NF EN ISO 13259:2020 Systèmes de canalisations en thermoplastiques pour applications enterrées sans pression - Méthodes d'essai d'étanchéité des assemblages à bague d'étanchéité en élastomère
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
NF P18-141:1996 Grout for prestressing tendons. Test methods.
NF P25-371*NF EN 16005:2012 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF C90-403-2:1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES). PART 3-2 : ASPECTS OF APPLICATION. USER PROCESS. (EUROPEAN STANDARD EN 50 090-3-2).
NF EN ISO 20337:2019 Composites plastiques renforcés de fibres - Méthode d'essai de cisaillement à l'aide d'un châssis de cisaillement pour la détermination de la contrainte de cisaillement/déformation au cisaillement dans le plan et du module de cisaillement
NF EN 13523-3:2021 Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
NF F01-116:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
NF EN ISO 13254:2017 Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau
NF ISO 24578:2021 Hydrométrie - Profileurs acoustiques à effet Doppler - Méthode et application pour le mesurage de l'écoulement à surface libre sur un bateau mobile

German Institute for Standardization, How to use the strain gauge

DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN ISO 9022-3:2000 Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:1998)
DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN ISO 15630-3:2020-02 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10); German version EN ISO 15630-3:2019
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN EN ISO 13165-2:2020-12 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2014); German version EN ISO 13165-2:2020 / Note: To be replaced by DIN EN ISO 13165-2 (2021-10).
DIN EN ISO 13164-3:2020-12 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013); German version EN ISO 13164-3:2020
DIN EN ISO 13165-2:2021-10 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO/DIS 13165-2:2021); German and English version prEN ISO 13165-2:2021 / Note: Date of issue 2021-09-17*Intended as replacement for DIN EN ISO 13165-2 (2020-12).
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008
DIN EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits; German version EN 50362:2003
DIN EN ISO 15630-3:2017 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel; (ISO/DIS 15630-3:2017); German and English version prEN ISO 15630-3:2017
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
DIN EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN 12445:2001 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; German version EN 12445:2000
DIN EN 15305:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 13146-8:2012-06 Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2012
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN EN ISO 13254:2018-01 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010); German version EN ISO 13254:2017
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)

ES-UNE, How to use the strain gauge

UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 13164-3:2020 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013) (Endorsed by Asociación Española de Normalización in March of 2020.)
UNE-EN ISO 13165-2:2022 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022) (Endorsed by Asociación Española de Normalización in December of 2022.)
UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
UNE-IEC 60092-350:2015 Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)

AENOR, How to use the strain gauge

UNE-EN 61043:1999 ELECTROACUSTICS. INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY. MEASUREMENT WITH PAIRS OF PRESSURE SENSING MICROPHONES.
UNE 57152-2:1990 PAPER AND BOARD. DETERMINATION OF RESISTANCE TO PICKING. ACCELERATING SPEED METHOD USING THE IGT TESTER. (PENDULUM OR SPRING MODEL)
UNE-EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
UNE-EN 13104+A2:2013 Railway applications - Wheelsets and bogies - Powered axles - Design method
UNE-EN 13103:2010+A2:2013 Railway applications - Wheelsets and bogies - Non-powered axles - Design method
UNE-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

AT-ON, How to use the strain gauge

ONORM ISO 6015:1991 Earth-moving machinery — Hydraulic excavators — Methods of measuring tool forces
ONORM EN 445-1996 Grout for prestressing tendons-Test methods

HU-MSZT, How to use the strain gauge

MSZ 8880/2.lap-1963

Professional Standard - Building Materials, How to use the strain gauge

JC/T 749-2010 Standard methods of testing rubber gasket ring of prestressed and self-stressing concrete pipe
JC/T 749-1987 Standard methods of testing rubber gasket ring of prestressed and self-stressing concrete pipe
JC/T 219-1979 Physical examination method of Portland self-stressing cement (for pipe making)

NL-NEN, How to use the strain gauge

NEN 6691-1988 Sludge - Determination of dewaterability by the MFT-method

Group Standards of the People's Republic of China, How to use the strain gauge

T/JMTX 006-2019 General stress test method for bridge cranes
T/JMTX 006-2020 General stress test method for bridge cranes
T/CSTM 00122-2021 Test method for freeze-thaw resistance of concrete under applied bending stress

Professional Standard - Agriculture, How to use the strain gauge

GB 12415-1990 Test method for internal stress of pharmaceutical glass containers

Professional Standard - Machinery, How to use the strain gauge

JB/T 9233.21-1999 General methods of testing the performance of industrial process measurement and control instruments.Frequency response
JB/T 9233.22-1999 General methods of testing the performance of industrial process measurement and control instruments.Step response
JB/T 54364-1998 Open back press. Reliability assessment method (only for internal use)

CEN - European Committee for Standardization, How to use the strain gauge

PREN 15273-1-2018 Railway applications - Gauges - Part 1: Generic explanations and methods of gauging
EN ISO 15630-3:2002 Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel
EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel

European Committee for Standardization (CEN), How to use the strain gauge

EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
EN 445:2007 Grout for prestressing tendons - Test methods
EN 445:1996 Grout for Prestressing Tendons - Test Methods
EN 445:1997 Grout for Prestressing Tendons - Test Methods
PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
prEN 445-1990 Grout for prestressing tendons; test methods

Danish Standards Foundation, How to use the strain gauge

DS/EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
DS/ISO 11843-3:2003 Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
DS/EN 13104+A2:2013 Railway applications - Wheelsets and bogies - Powered axles - Design method
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/EN 13103+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
DS/EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

AGMA - American Gear Manufacturers Association, How to use the strain gauge

93FTM3-1993 A Rayleigh-Ritz Approach to Determine Compliance and Root Stresses in Spiral Bevel Gears Using Shell Theory

ESDU - Engineering Sciences Data Unit, How to use the strain gauge

ESDU 78036 A-2013 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations
ESDU 78036 A-1980 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations.
STRUCT 00.06.01 A-1980 Method of calculating stress distribution in a reinforced symmetrical shell under bending.

Military Standard of the People's Republic of China-General Armament Department, How to use the strain gauge

GJB 3752.7-1999 Ground-surface strategic missile weapon system operational requirements demonstration method environmental adaptability

SE-SIS, How to use the strain gauge

SIS 65 00 42-1957
SIS SS IEC 243:1982 Recommended methods of test for electric strength of solid insulating materials at power frequencies
SIS SS IEC 737:1984 Nuclear instrumentation — In-core temperature or primary envelope temperature measurements in nuclear power reactors — Characteristics and test methods

Professional Standard - Textile, How to use the strain gauge

FZ/T 80007.1-2006 Test method of peeled off strength value for garments used adhesive interlining

ES-AENOR, How to use the strain gauge

UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

交通运输部, How to use the strain gauge

JT/T 1265-2019 Tension testing method of prestressed precision-rolled threaded steel bars for bridges

KR-KS, How to use the strain gauge

KS B ISO 16063-42-2017 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
KS B ISO 15769-2020 Hydrometry — Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
KS B ISO 21432-2023 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction

未注明发布机构, How to use the strain gauge

BS ISO 11483-3:2003 Capability of detection — Part 3 : Methodology for determination of the critical value for the response variable when no calibration data are used
BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright

CZ-CSN, How to use the strain gauge

CSN 27 7030-1989 Earth-moving machinery — Hydraulic excavators — Part 1: Methods of measuring tool forces
CSN ISO 7741:1994 Instruments for surgery - Scissors and shears - General requirements and test methods

VN-TCVN, How to use the strain gauge

TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

IN-BIS, How to use the strain gauge

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, How to use the strain gauge

JEDEC JESD94B-2015 Application Specific Qualification Using Knowledge Based Test Methodology

GOSTR, How to use the strain gauge

GOST R 58400.6-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the properties of recovery via impacts of multiple shear stress (MSCR) using dynamic shear rheometer (DSR)
GOST 26954-2019 Agricultural mobile machinery. Method for determining maximum normal stress in soil

Lithuanian Standards Office , How to use the strain gauge

LST EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
LST EN 13104-2009+A2-2013 Railway applications - Wheelsets and bogies - Powered axles - Design method
LST EN 13103-2009+A2-2012 Railway applications - Wheelsets and bogies - Non-powered axles - Design method
LST EN 14278-1-2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

RO-ASRO, How to use the strain gauge

STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS

ECIA - Electronic Components Industry Association, How to use the strain gauge

EIA-364-29B-1998 TP-29B Contact Retention Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2007.1)
EIA-364-37B-1998 TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2014)

American Society of Mechanical Engineers (ASME), How to use the strain gauge

ASME SEC X NMA APP AC-2001 Appendix AC - Nonmandatory Discontinuity Stresses for Class II Method B Vessels
ASME B31J-2008 Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components

IPC - Association Connecting Electronics Industries, How to use the strain gauge

IPC 7711 3.7.3.1-1998 Gull Wing Removal (Four-Sided) Flux Application Method - Surface Tension

TR-TSE, How to use the strain gauge

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers
TS 3347-1979 UNRECORDED MAGNETIC TAPES FOR INSTRUMENTATION APPLICATIONS — PHYSICAL PROPERTIES AND TEST METHODS

PT-IPQ, How to use the strain gauge

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

CU-NC, How to use the strain gauge

NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means

TH-TISI, How to use the strain gauge

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the strain gauge

ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE NY-08-055-2008 Supply Fan Control Methods for VAV Systems Using a Fan Airflow Station

Professional Standard - Automobile, How to use the strain gauge

QC/T 76.7-1993 Mining dump truck test method emergency steering ability test

Standard Association of Australia （SAA）, How to use the strain gauge

AS 1580.401.3:2002(R2013)
AS 2542.2.3:2007 Sensory analysis - Specific methods - Guidelines for the use of quantitative response scales (rating)
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
AS/NZS IEC 60092.350:2019 Electrical installations in ships, Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
AS/NZS 1748.2:2011

IT-UNI, How to use the strain gauge

UNI/TR 11800-2020 Thermal insulating for building applications - Guidelines for defining roles and methods of use and installation

Professional Standard - Education, How to use the strain gauge

JY 0213-1994 Environment specification of tronsterence tore and tert for the mechanics heat teaching instrumentr

US-FCR, How to use the strain gauge

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

Association of German Mechanical Engineers, How to use the strain gauge

VDI/AIM 4472 Blatt 10-2008 Requirements to be met by transponder systems for use in the supply chain - Test methods to check the performance of transponder systems (RFID)

BE-NBN, How to use the strain gauge

NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

(U.S.) Plastic Pipe Association, How to use the strain gauge

PPI TN-28-2014 Guide to Differences in Pressure Rating PE Water Pipe using the ASTM/PPI and ISO Methods

International Electrotechnical Commission (IEC), How to use the strain gauge

IEC 61578:1997 Radiation protection instrumentation - Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments - Test methods
IEC 60092-350:2014/COR1:2018 Corrigendum 1 - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

Institute of Electrical and Electronics Engineers (IEEE), How to use the strain gauge

IEEE P3004.1/D3, September 2012 IEEE Approved Draft Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems

Canadian General Standards Board （CGSB), How to use the strain gauge

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)