ZH
RU
ES

How to use stress analysis

How to use stress analysis, Total:499 items.

In the international standard classification, How to use stress analysis involves: Non-destructive testing, Nuclear energy engineering, Glass, Analytical chemistry, Surface treatment and coating, Sensory analysis, Accident and disaster control, Plastics, Thermodynamics and temperature measurements, Radiation measurements, Ergonomics, Pharmaceutics, Products of the chemical industry, Insulating fluids, Insulating materials, Natural gas, Organic chemicals, Iron and steel products, Testing of metals, Adhesives, Animal feeding stuffs, Fuels, Raw materials for rubber and plastics, Rubber, Paper and board, Soil quality. Pedology, Water quality, Quality, Metrology and measurement in general, Earthworks. Excavations. Foundation construction. Underground works, Telecommunication systems, Telecontrol. Telemetering, Particle size analysis. Sieving, Microbiology, Environmental protection, Rotating machinery, Electrical engineering in general, Veterinary medicine, Farming and forestry, Ferrous metals, Equipment for petroleum and natural gas industries, Construction materials, Leather technology, Acoustics and acoustic measurements, Electricity. Magnetism. Electrical and magnetic measurements, Petroleum products in general, Wastes, Lubricants, industrial oils and related products, Milk and milk products, Information technology (IT) in general, Telecommunications in general, Electronic components in general, Power transmission and distribution networks, Measurement of force, weight and pressure, Linear and angular measurements, Automatic controls for household use, Cereals, pulses and derived products, Road engineering, Vocabularies, METALLURGY, Characteristics and design of machines, apparatus, equipment, Paints and varnishes, Protection against fire, Fibre optic communications, Pipeline components and pipelines, Railway rolling stock, Materials and components for railway engineering, Pumps, Elements of buildings, Measurement of volume, mass, density, viscosity, Structures of buildings, Burners. Boilers, Road vehicles in general, Prepackaged and prepared foods, Non-ferrous metals, Reinforced plastics, Beverages, Rubber and plastics products, Protection against dangerous goods, Tobacco, tobacco products and related equipment, Electrical wires and cables, Textile fibres, Laboratory medicine.

German Institute for Standardization, How to use stress analysis

DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN 15305:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 15305:2009-01 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 15305 Berichtigung 1:2009-04 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN EN ISO 15630-3:2020-02 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10); German version EN ISO 15630-3:2019
DIN EN ISO 13165-2:2020-12 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2014); German version EN ISO 13165-2:2020 / Note: To be replaced by DIN EN ISO 13165-2 (2021-10).
DIN EN ISO 13164-3:2020-12 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013); German version EN ISO 13164-3:2020
DIN EN ISO 13165-2:2021-10 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO/DIS 13165-2:2021); German and English version prEN ISO 13165-2:2021 / Note: Date of issue 2021-09-17*Intended as replacement for DIN EN ISO 13165-2 (2020-12).
DIN EN ISO 14403-1:2012-10 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA); (ISO 14403-1:2012); German version EN ISO 14403-1:2012
DIN EN ISO 14403-2:2012-10 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012); German version EN ISO 14403-2:2012
DIN ISO 3972 Beiblatt 1:2018 Sensory Analysis - Methodology - Method of investigating sensitivity of taste; Supplement 1: Instruction for practical use
DIN EN ISO 15630-3:2017 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel; (ISO/DIS 15630-3:2017); German and English version prEN ISO 15630-3:2017
DIN SPEC 51458:2017-12 Testing of lubricants - Analysis of used greases - Requirements and test methods
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 17226-2:2019-04 Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2018); German version EN ISO 17226-2:2019
DIN EN 50598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
DIN 66136-4:2021 Determination of the degree of dispersion of metals using chemisorption - Part 4: Static-gravimetric method
DIN 66136-4:2009 Determination of the degree of dispersion of metals using chemisorption - Part 4: Static-gravimetric method
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
DIN EN 13146-8:2012-06 Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2012
DIN EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach; German version EN 16158:2012
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN ISO 8466-2:2004 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001)
DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate; German version EN 14865-1:2009+A1:2010
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN EN 10315:2006-10 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique; German version EN 10315:2006
DIN EN 17908:2022 Algae and algae-based products or intermediates - Methods of sampling and analysis - Determination of total lipids using the Ryckebosch-Foubert method; German and English version prEN 17908:2022
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN ISO 23913:2009-09 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006); German version EN ISO 23913:2009
DIN EN 17908:2022-10 Algae and algae-based products or intermediates - Methods of sampling and analysis - Determination of total lipids using the Ryckebosch-Foubert method; German and English version prEN 17908:2022 / Note: Date of issue 2022-09-02
DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
DIN EN ISO 14673-3:2004-05 Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2004); German version EN ISO 14673-3:2004
DIN EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits; German version EN 50362:2003
DIN EN ISO 14673-2:2004-05 Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2004); German version EN ISO 14673-2:2004

British Standards Institution (BSI), How to use stress analysis

BS EN 15305:2008 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction
BS ISO 11358-3:2013 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS ISO 11358-3:2014 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS ISO 11358-3:2021 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS ISO 20720:2018 Microbeam analysis. Methods of specimen preparation for analysis of general powders using WDS and EDS
BS ISO 18075:2018 Steady-state neutronics methods for power-reactor analysis
BS ISO 12787:2012 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
20/30406599 DC BS ISO 11358-3. Plastics. Thermogravimetry (TG) of polymers. Part 3. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
BS EN ISO 11206:2013 Water quality. Determination of dissolved bromate. Method using ion chromatography (IC) and post column reaction (PCR)
21/30436560 DC BS EN ISO 7933.2. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
18/30312137 DC BS EN ISO 7933. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS 7819:1995 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
PD ISO/TR 18161:2013 Automation systems and integration. Applications integration approach using information exchange requirements modelling and software capability profiling
PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
BS EN 60300-3-1:2003 Dependability management - Application guide - Analysis techniques for dependability - Guide on methodology
BS EN 60300-3-1:2004 Dependability management. Application guide - Analysis techniques for dependability. Guide on methodology
BS ISO 17381:2003 Water quality. Selection and application of ready-to-use test kit methods in water analysis
BS 5766-21:2001 Methods for analysis of animal feeding stuffs. Determination of potassium and sodium contents. Methods using flame-emission spectrometry
15/30287670 DC BS ISO 17951-2. Water quality. Determination of fluoride using flow analysis (FIA and CFA). Part 2. Method using continuous flow analysis (CFA) with automated in-line distillation
BS 7142-4:1989 Methods for analysis of milk-based products - Determination of fat content of liquid, concentrated and dried milk products by the Weibull-Berntrop gravimetric method
BS IEC 60300-3-1:2003 Dependability management - Application guide - Analysis techniques for dependability - Guide on methodology
BS EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
BS 7996:2009 Torque measuring devices - Calibration and classification using continual torque application - Method
BS 5766-17:1999 Methods for analysis of animal feeding stuffs. Determination of furazolidone content. Method using high-performance liquid chromatography
BS EN ISO 7539-5:1995 Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens
BS ISO 21087:2019 Gas analysis. Analytical methods for hydrogen fuel. Proton exchange membrane (PEM) fuel cell applications for road vehicles
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
BS 7142-3:1989 Methods for analysis of milk-based products - Determination of fat content of milk-based edible ices and ice mixes by the Weibull-Berntrop gravimetric method
15/30287666 DC BS ISO 17951-1. Water quality. Determination of fluoride using flow analysis (FIA and CFA). Part 1. Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
BS 3900-E17:1997 Methods of test for paints - Determination of mar resistance using a curved stylus
BS 3900-E18:1997 Methods of test for paints - Determination of mar resistance using a pointed stylus
BS EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS EN 10315:2006(2010) Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
BS 7142-2:1989 Methods for analysis of milk-based products - Determination of fat content of milk-based infant foods by the Weibull-Berntrop gravimetric method
BS ISO 22980:2020 Tobacco. Determination of the content of total alkaloids as nicotine. Continuous-flow analysis method using KSCN/DCIC
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS PD CEN/TR 17559:2021 Algae and algae products. Food and feed applications: General overview of limits, procedures and analytical methods
18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
22/30458340 DC BS EN 17908. Algae and algae products. Methods of sampling and analysis. Determination of total lipids content using the Ryckebosch-Foubert method

American National Standards Institute （ANSI), How to use stress analysis

ANSI/ANS 19.3-2011 Steady-State Neutronics Methods for Power Reactor Analysis
ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

Professional Standard - Aviation, How to use stress analysis

HB 20089-2012 Stress analysis methods for avionics products
HB 20091-2012 Stress damage analysis method for avionics products
HB 5351.7-1986 Method for determination of particle size of refractory powder for investment casting (torque balance sedimentation analysis method)

American Society for Testing and Materials (ASTM), How to use stress analysis

ASTM F218-05 Standard Test Method for Analyzing Stress in Glass
ASTM F218-95 Standard Test Method for Analyzing Stress in Glass
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1005-97 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E1005-15 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM E1005-16 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E3007-21 Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
ASTM E2046-03 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E2898-20 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2898-20a Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E1005-03e1 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E1005-03 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
ASTM F218-12 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM F218-13(2020) Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM D1945-96(2001) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM E1863-97 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
ASTM E1863-97(2002) Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
ASTM E1782-03 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-98 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-22 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-15 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E2046-99 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E2046-19 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E2046-14 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM D3929-96e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D3929-03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E2898-13 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM F218-13 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM D6370-99(2014) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D3895-98 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D4729-04 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method
ASTM D4729-08 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
ASTM E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM E1005-21 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C1718-10 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
ASTM E1640-13(2018) Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM C1476-00 Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
ASTM E1545-00 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1503-97 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM E1824-08 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
ASTM D3238-22 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D3238-95(2015) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5830-95(2001) Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D5830-95 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D7751-14e1 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM E2898-14 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM C1735-17(2021) Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM C1476-06 Standard Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
ASTM E910-07(2013) Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
ASTM F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
ASTM E2781-11 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
ASTM E2781-16 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
ASTM D8422-21 Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E910-07 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
ASTM E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM E854-19 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
ASTM E854-14e1 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E1503-05 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM E1914-98 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM E1914-98(2003) Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM G144-96 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G144-01(2022) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM E910-01 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
ASTM E910-95 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
ASTM E854-98 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E910-18 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance
ASTM D4628-23 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM E1640-99 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1678-15 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM D7751-11e1 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM E295-82(2000) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E2958-21 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM E854-14 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E2830-11(2020) Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
ASTM D6896-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM G144-01(2014) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM A981/A981M-11 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
ASTM D6447-09 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ASTM E1914-07 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM E854-03 Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
ASTM E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E1382-97(2023) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
ASTM D3975-93(1999) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM C1379-04 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry

International Organization for Standardization (ISO), How to use stress analysis

ISO 18075:2018 Steady-state neutronics methods for power-reactor analysis
ISO 11358-3:2013 Plastics.Thermogravimetry (TG) of polymers.Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 20720:2018 Microbeam analysis - Methods of specimen preparation for analysis of general powders using WDS and EDS
ISO 11358-3:2021 Plastics - Thermogravimetry (TG) of polymers - Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
ISO 12787:2011 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel
ISO/CD 15630-3:1972 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
ISO 11206:2011 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
ISO 21087:2019 Gas analysis — Analytical methods for hydrogen fuel — Proton exchange membrane (PEM) fuel cell applications for road vehicles
ISO 14824-3:2012 Grout for prestressing tendons - Part 3: Test methods
ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
ISO 8466-2:2001 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions
ISO/TS 21432:2005/cor 1:2008 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction; Technical Corrigendum 1
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 18749:2004 Water quality - Adsorption of substances on activated sludge - Batch test using specific analytical methods
ISO 23468:2021 Reactor technology - Power reactor analyses and measurements - Determination of heavy water isotopic purity by Fourier transform infrared spectroscopy

AASHTO - American Association of State Highway and Transportation Officials, How to use stress analysis

DIVISION I 8.15-1996 Service Load Design Method (Allowable Stress Design)
DIVISION I SEC 5-B-1996 Service Load Design Method Allowable Stress Design
DIVISION I SEC 4-B-1996 Service Load Design Method Allowable Stress Design
DIVISION I SEC 7-B-1996 Service Load Design Method Allowable Stress Design (Interim 1997; Interim 2000)
DIVISION I SEC 10-C-1996 Service Load Design Method Allowable Stress Design (Interim 1997; Interim 2000)
DIVISION I SEC 5-A&B-1996 General Requirements and Materials - Service Load Design Method Allowable Stress Design (Interim 1997; Interim 1998; Interim 1999; Interim 2000)

Standard Association of Australia （SAA）, How to use stress analysis

AS 2542.2.3:2007 Sensory analysis - Specific methods - Guidelines for the use of quantitative response scales (rating)
AS IEC 60300.3.1:2003(R2013)
AS/NZS 1748.2:2011
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS 4969.14:2009
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS 1289.3.6.3:2020 Methods of testing soils for engineering purposes, Part 3.6.3: Soil classification tests — Determination of the particle size distribution of a soil — Standard method of fine analysis using an hydrometer

Danish Standards Foundation, How to use stress analysis

DS/EN 15305/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS/EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
DS/ISO 11843-3:2003 Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
DS/EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)
DS/EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)
DS/EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/ISO 17381:2007 Water quality - Selection and application of ready-to-use test kit methods in water analysis
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN 60300-3-1:2004 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
DS/EN ISO 23913:2009 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
DS/EN 14865-1+A1:2011 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
DS/EN 13384-1+A2:2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance
DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer

Lithuanian Standards Office , How to use stress analysis

LST EN 15305-2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 15305-2008/AC-2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
LST EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
LST EN 16158-2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
LST EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
LST EN 50598-1-2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
LST EN 14865-1-2009+A1-2011 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
LST EN 13384-1-2003+A2-2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance

AENOR, How to use stress analysis

UNE-EN 15305:2010 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
UNE-EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
UNE-EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
UNE-ISO 17381:2012 Water quality -- Selection and application of ready-to-use test kit methods in water analysis
UNE-EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
UNE-EN 50598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic
UNE-EN 60300-3-1:2005 Dependability management -- Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
UNE-EN 14865-1:2010+A1:2011 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
UNE-EN 524-4:1997 STEEL STRIP SHEATHS FOR PRESTRESSING TENDONS. TEST METHODS. PART 4: DETERMINATION OF LATERAL LOAD RESISTANCE.

European Committee for Standardization (CEN), How to use stress analysis

EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 17050:2017 Animal feeding stuffs: Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS
CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate

WRC - Welding Research Council, How to use stress analysis

BULLETIN 472-2002 USING FINITE ELEMENT ANALYSIS TO DETERMINE PIPING ELBOW BENDING MOMENT (B2) STRESS INDICES
BULLETIN 308-1985 VERIFICATION AND APPLICATION OF AN INELASTIC ANALYSIS METHOD FOR LMFBR PIPING SYSTEM

Professional Standard-Safe Production, How to use stress analysis

AQ/T 3054-2015 Guidelines for layer of protection analysis (LOPA)

Korean Agency for Technology and Standards (KATS), How to use stress analysis

KS M ISO 11358-3:2017 Plastics - Thermogravimetry(TG) of polymers - Part3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 11358-3-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
KS D ISO 15630-3-2003(2013) Steel for the reinforcement and prestressing of concrete－Test methods－Part 3：Prestressing steel
KS D ISO 15630-3:2003 Steel for the reinforcement and prestressing of concrete-Test methods-Part 3:Prestressing steel
KS M ISO 5630-3:2007 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
KS D ISO 15630-3:2014 Steel for the reinforcement and prestressing of concrete－Test methods－Part 3：Prestressing steel
KS M ISO 5630-3:2017 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
KS I ISO 17381-2010(2015) Water quality－Selection and application of ready-to-use test kit methods in water analysis
KS M ISO 17226-2:2019 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis
KS M ISO 17226-2:2014 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis
KS I ISO 18749-2010(2015) Water quality－Adsorption of substances on activated sludge－Batch test using specific analytical methods
KS I ISO 8466-2:2007 Water quality-Calibration and evaluation of analytical methods and estimation of performance characteristics-Part 2:Calibration strategy for non-linear second-order calibration functions
KS M 3536-1999
KS I ISO 18749:2010 Water quality-Adsorption of substances on activated sludge-Batch test using specific analytical methods
KS I ISO 18749:2022 Water quality ― Adsorption of substances on activated sludge ―Batch test using specific analytical methods

AGMA - American Gear Manufacturers Association, How to use stress analysis

2000FTM12-2000 Finite Strips Methods as an Alternative to the Finite Elements in Gear Tooth Stress and Strain Analysis
93FTM4-1993 Stress Analysis of Spiral Bevel Gears A Novel Approach to Tooth Modelling
P229.25-1982 New Method for Analyzing Gear Tooth Stress as a Function of Tooth Contact Pattern Shape and Position
93FTM3-1993 A Rayleigh-Ritz Approach to Determine Compliance and Root Stresses in Spiral Bevel Gears Using Shell Theory
08FTM02-2008 A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques

Association Francaise de Normalisation, How to use stress analysis

NF A09-185*NF EN 15305:2009 Non-destructive testing - Test Method for Residual Stress analysis by X-ray Diffraction.
NF ISO 21087:2019 Analyse des gaz - Méthodes analytiques pour carburant hydrogène - Applications utilisant des piles à combustible à membrane échangeuse de protons (MEP) pour véhicules routiers
NF EN 15305:2009 Essais non-destructifs - Méthode d'essai pour l'analyse des contraintes résiduelles par diffraction des rayons X
NF T75-612*NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
NF EN 16900:2018 Huiles de pyrolyse rapide pour application chaudières - Spécifications et méthodes d'analyses
FD CEN/TR 17421:2020 Aliments pour animaux - Méthodes d'échantillonnage et d'analyse - Recommandations pour l'organisation et l'évaluation des études comparatives interlaboratoires utilisant des méthodes d'analyses multianalytes
NF A03-720-3*NF EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3 : prestressing steel
NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
NF A06-002:1986 Chemical analysis of steel and cast iron - Statistical method for checking the application of a procedure for the analysis of steels and cast iron
NF A08-300:1989 Steel and Iron - Recommendations for the preparation and the use of standard method of analysis using flame atomic absorption spectrometry
NF A09-285:1999 Non destructive testing - Test methods for residual stress analysis by X-ray diffraction
FD X50-159:2013 Functional analysis and value analysis - Practical guide for very small-sized businesses and SMEs - Application guide for the "functional analysis and value analysis" approach
NF T90-226*NF EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR)
FD A08-300:2021 Analyse chimique des aciers et des fontes - Elaboration et emploi de méthodes d'analyse par spectrométrie d'absorption atomique dans la flamme
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
NF C53-598-1:2015 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1 : general requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analyti
NF U47-019:2007 Animal health analysis methods - Guide of good practices for implementation of ELISA techniques.
NF U47-019:2000 Animal health analysis methods - Guide to good practices for implementation of ELISA techniques.
NF C26-306:1994 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF X20-107*NF ISO 21087:2019 Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles
NF EN 16158:2012 Aliments des animaux - Dosage de la semduramicine - Chromatographie liquide utilisant une approche analytique en arbre
NF A05-521*NF ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
FD T90-230:2015 Water quality - Characterization of analytical methods - Guide for selection of a matrix representative of a scope of application
NF M07-119-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil.
NF M07-119-3*NF EN 15199-3:2020 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil
NF C90-403-2:1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES). PART 3-2 : ASPECTS OF APPLICATION. USER PROCESS. (EUROPEAN STANDARD EN 50 090-3-2).
NF U47-004:2023 Méthodes d'analyse en santé animale - Recherche d'anticorps contre la brucellose par la microméthode de fixation du complément
NF C20-300-3-1*NF EN 60300-3-1:2005 Dependability management - Part 3-1 : application guide - Analysis techniques for dependability - Guide on methodology
NF EN 60300-3-1:2005 Gestion de la sûreté de fonctionnement - Partie 3-1 : guide d'application - Techniques d'analyse de la sûreté de fonctionnement - Guide méthodologique
FD CEN/TR 14585-3:2017 Tuyauteries métalliques flexibles onduleuses pour applications sous pression - Partie 3 : méthode de conception
NF V18-241*NF EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
FD E29-823-3*FD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3 : Design method
NF EN ISO 21570/A1:2013 Produits alimentaires - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Méthodes quantitatives basées sur l'utilisation des acides nucléiques
NF EN ISO 21569:2006 Produits alimentaires - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Méthodes qualitatives basées sur l'utilisation des acides nucléiques
NF EN ISO 21570:2006 Produits alimentaires - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Méthodes quantitatives basées sur l'utilisation des acides nucléiques
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF ISO 11035:1995 Analyse sensorielle - Recherche et sélection de descripteurs pour l'élaboration d'un profil sensoriel, par approche multidimensionnelle
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF U47-107:2004 Animal health analysis methods - Guidelines for antimicrobial susceptibility testing with the agar diffusion method.
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF A06-726:1992 Analyse chimique du cuivre - Dosage du soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction.
FD CEN/TR 17559:2022 Algues et produits d'algues - Applications de denrées alimentaires et d'aliments pour animaux : Vue d'ensemble des limites, modes opératoires et méthodes d'analyse
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF EN 16424:2014 Caractérisation des déchets - Méthode de dépistage pour la détermination de la composition élémentaire au moyen d'analyseurs portables de fluorescence X
NF U47-106:2004 Animal health analysis methods - In-vitro determination of the susceptibility of bacterial to antimicrobial agents using the agar dilution method.

American Gear Manufacturers Association, How to use stress analysis

AGMA 2000FTM12-2000 Finite Strips Methods as an Alternative to the Finite Elements in Gear Tooth Stress and Strain Analysis
AGMA 93FTM4-1993 Stress Analysis of Spiral Bevel Gears A Novel Approach to Tooth Modelling
AGMA 08FTM02-2008 A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques
AGMA 91FTM8-1991 Methods of Statistical Dynamics for the Calculation of Gear Stress Distribution and its Effect on Gear Failure Probability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use stress analysis

GB/T 16290-1996 Sensory analysis--Methodology--Evaluation of food products by methods using scales
GB/T 10065-1988 Gassing of insulating liquids under electrical stress and ionization
GB/T 10065-2007 Gassing of insulating liquids under electrical stress and ionization
GB/T 19829.2-2005 Petroleum and natural gas industries.Life cycle costing.Part 2:Guidance on application of methodology and calculation methods

未注明发布机构, How to use stress analysis

BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction
BS ISO 11483-3:2003 Capability of detection — Part 3 : Methodology for determination of the critical value for the response variable when no calibration data are used
DIN EN 14067-5:2022 Railway applications – Aerodynamics – Part 5: Requirements and test methods for aerodynamics in tunnels

Institute of Electrical and Electronics Engineers (IEEE), How to use stress analysis

IEEE Std 3006.5-2014 IEEE Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis ofIndustrial and Commercial Power Systems
IEEE P3006.5/D1, October 2012 IEEE Draft Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems
IEEE Std 643-2004/COR 1-2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE P643-2004/Cor1/D3, August 2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE Std 643-2004/Cor 1-2013 (Corrigendum to IEEE Std 643-2004) IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE P3006.5/D2, July 2014 IEEE Draft Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems
IEEE 643/COR 1-2013 Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE Std 3006.8-2018 IEEE Recommended Practice for Analyzing Reliability Data for Equipment Used in Industrial and Commercial Power Systems

KR-KS, How to use stress analysis

KS M ISO 11358-3-2017 Plastics - Thermogravimetry(TG) of polymers - Part3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
KS M ISO 17226-2-2019 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis
KS I ISO 18749-2022 Water quality ― Adsorption of substances on activated sludge ―Batch test using specific analytical methods

国家市场监督管理总局、中国国家标准化管理委员会, How to use stress analysis

GB/T 33047.3-2021 Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
GB/T 39424.2-2020 Road vehicles—Traffic accident analysis—Part 2: Guidelines for the use of impact severity measures

ANS - American Nuclear Society, How to use stress analysis

19.3-2011 Steady-state neutronics methods for power reactor analysis

GOSTR, How to use stress analysis

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
GOST R 57741-2017 Resources saving. Waste treatment. Guidance on selection and application of method of waste preliminary analysis
PNST 305-2018 Rolling stock working on liquefied natural gas. Methods for taking samples and analyzing the content of oils and impurities in the used liquefied natural gas
GOST R 57224-2016 Рlastic materials. Determination of the ultimate aerobic biodegradability under controlled composting conditions. Method by using analysis of evolved carbon dioxide. Part 1. General method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How to use stress analysis

IEEE 3006.5-2014 Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems
IEEE 3006.5- Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems (Availability is Unknown)
IEEE 643 CORR 1-2013 Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE 3006.8-2018 Recommended Practice for Analyzing Reliability Data for Equipment Used in Industrial and Commercial Power Systems

European Committee for Electrotechnical Standardization（CENELEC）, How to use stress analysis

HD 488 S1-1988 Gassing of Insulating Liquids Under Electrical Stress and Ionization
EN 50598-1:2014 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic

RU-GOST R, How to use stress analysis

GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
GOST ISO 1833-11-2011 Textiles. Quantitative chemical analysis. Part 11. Mixtures of cellulose and polyester fibres (method using sulfuric acid)

CEN - European Committee for Standardization, How to use stress analysis

EN ISO 15630-3:2002 Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel
EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel

UNKNOWN, How to use stress analysis

CSCBPV-TD001-2013

ES-UNE, How to use stress analysis

UNE-EN ISO 13164-3:2020 Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013) (Endorsed by Asociación Española de Normalización in March of 2020.)
UNE-EN ISO 13165-2:2022 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022) (Endorsed by Asociación Española de Normalización in December of 2022.)
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN ISO 17226-2:2019 Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2018)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)

American Welding Society (AWS), How to use stress analysis

WRC 308:1985 Verification and Application of an Inelastic Analysis Method for LMFBR Piping System

CZ-CSN, How to use stress analysis

CSN 27 7030-1989 Earth-moving machinery — Hydraulic excavators — Part 1: Methods of measuring tool forces

IN-BIS, How to use stress analysis

AT-ON, How to use stress analysis

ONORM M 6245-1997 Water analysis - Summary of methods - Limits of detection, fields of application, Statistical data

VN-TCVN, How to use stress analysis

TCVN 7723-2-2015 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) .Part 2:Method using continuous flow analysis (CFA)
TCVN 6661-2-2009 Water quality.Calibration and evaluation of analytical methods and estimation of performance charactenstcs.Part 2.Calibration strategy for non-linear second-order calibration functions

International Electrotechnical Commission (IEC), How to use stress analysis

IEC TR 61850-90-3:2016 Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
IEC TR 61850-90-11:2020 Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
IEC TR 61850-90-16:2021 Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
IEC TR 61850-90-9:2020 Communication networks and systems for power utility automation - Part 90-3: Using IEC 61850 for condition monitoring diagnosis and analysis
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide; Analysis techniques for dependability; Guide on methodology

National Aeronautics and Space Administration (NASA), How to use stress analysis

NASA-CR-165843-1982 Application of an aerodynamic analysis method including attainable thrust estimates to low speed leading-edge flap design for supersonic cruise vehicles

Indonesia Standards, How to use stress analysis

SNI 03-3962-1995 Test method for light sediment grain distribution gravimetrically by sieves

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use stress analysis

ASHRAE 4589-2002 The Use of Time Series Analysis in Fault Detection and Diagnosis Methodologies
ASHRAE BN-97-16-1997 Symposium on Field Methods for Analyzing Equipment@ Building@ and Facility Energy Use

ECIA - Electronic Components Industry Association, How to use stress analysis

EIA-364-37B-1998 TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2014)
EIA-364-29B-1998 TP-29B Contact Retention Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2007.1)

ESDU - Engineering Sciences Data Unit, How to use stress analysis

ESDU 78036 A-2013 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations
ESDU 88037-1988 World-wide extreme wind speeds. Part 2: examples using various methods of analysis.
ESDU 88037-2012 World-wide extreme wind speeds. Part 2: examples using various methods of analysis
STRUCT 00.06.01 A-1980 Method of calculating stress distribution in a reinforced symmetrical shell under bending.
ESDU 78036 A-1980 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations.

Military Standard of the People's Republic of China-General Armament Department, How to use stress analysis

GJB 3752.7-1999 Ground-surface strategic missile weapon system operational requirements demonstration method environmental adaptability

Professional Standard - Agriculture, How to use stress analysis

空气和废气监测分析方法 7.6.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates

Group Standards of the People's Republic of China, How to use stress analysis

T/CNIA 0109-2021 General rules for the application of laser-induced breakdown spectroscopy for the analysis of non-ferrous metal materials

CENELEC - European Committee for Electrotechnical Standardization, How to use stress analysis

EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer
EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

Aerospace, Security and Defence Industries Association of Europe (ASD), How to use stress analysis

ASD-STAN PREN 3616-1991 Aerospace Series Fibre Reinforced Plastics Test Method for the Determination of Moisture Content by Means of Moisture Evolution Analyser (MEA) (Issue P 1)

国家铁路局, How to use stress analysis

TB/T 3503.3-2018 Aerodynamics for railway applications Part 3: Tunnel aerodynamic requirements and test methods

RO-ASRO, How to use stress analysis

STAS SR ISO 9688:1990 Mechanical vibration and shock ~ Analitycal methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses
SR 2567-5-1996 Soft drinks - Methods of analysis - Determination of artificial sweeteners - Method using high-performance liquid chromatography

Japanese Industrial Standards Committee (JISC), How to use stress analysis

JIS C 5750-3-1:2006 Dependability management -- Part 3-1: Application guide -- Analysis techniques for dependability -- Guide on methodology