ZH
RU
ES

test my life

test my life, Total:434 items.

In the international standard classification, test my life involves: Electrical and electronic testing, Semiconductor devices, Galvanic cells and batteries, Adhesives, Rails and railway components, Cutting tools, Electronic components in general, Electric road vehicles, Industrial automation systems, Electricity. Magnetism. Electrical and magnetic measurements, Insulating fluids, Environmental testing, Quality, Electrical wires and cables, Materials for aerospace construction, Floor treatment appliances, Characteristics and design of machines, apparatus, equipment, Optoelectronics. Laser equipment, Powder metallurgy, Cinematography, Photography, Non-destructive testing, Electrical accessories, Test conditions and procedures in general, Road vehicle systems, Surface treatment and coating, Medical equipment, Cargo equipment, Semiconducting materials, Inorganic chemicals, Elements of buildings, Fuel cells, Rubber, Graphic technology, Construction materials, Standardization. General rules, Hospital equipment, Mechanical testing, Lubricants, industrial oils and related products, Non-ferrous metals, Measurement of volume, mass, density, viscosity, Fluid storage devices, Valves, Rubber and plastics products, Railway rolling stock, Furniture, Lubrication systems, Electronic display devices, Reinforced plastics, Non-metalliferous minerals, Road engineering, Electronic tubes, Bearings, Energy and heat transfer engineering in general, Testing of metals, Aerospace electric equipment and systems, Paints and varnishes, Glass, Road vehicles in general, Laboratory medicine, Fluid power systems.

RO-ASRO, test my life

STAS 12046/2-1984 CUTTING LIFE TESTING Tool-life ttsting methods of turning tools
STAS 12046/1-1981 Cutting life testing WEAR General notions
STAS 12198-1984 AIH Content determination of thorium short life descendants(radon 220)
STAS 12052-1982 A I R Determination of 222 radon short life descendants content
STAS 10030-1975 PAINTS AND VARNISHES Determination of the life-time of the products with several components that are separately delivered, by testing the viscosity

CZ-CSN, test my life

CSN 35 8549-1969 Life testing of electronic tubes
CSN 34 6427-1961 Tests of life durability of insulating materials by means of motorettes
CSN ISO 8688-1:1993 Tool life testing in milling. Part 1: Face milling
CSN ISO 8688-2:1993 Metal-cutting tools. Tool life testing in milling. Part 2: End milling

IN-BIS, test my life

Korean Agency for Technology and Standards (KATS), test my life

KS A 5608-1-2006 Accelerated life test-Part 1:Outline of accelerated life test
KS A 5608-2-2006 Accelerated life test－Part 2：Design of accelerated life test
KS A 5608-2-2006(2017) Accelerated life test－Part 2：Design of accelerated life test
KS C IEC PAS 62164-2003(2008) Guidelines for GaAs MMIC and FET life testing
KS B ISO 3685:2018 Tool-life testing with single-point turning tools
KS A 5608-3-2006 Accelerated life test－Part 3：Data analysis of accelerated life test
KS C 2002-1998(2018)
KS B ISO 3685:2003 Tool-life testing with single-point turning tools
KS C 2602-2002 Accelerated life test of electric heating wires and rolled wires
KS C 2602-1982 Accelerated life test of electric heating wires and rolled wires
KS C 2602-2002(2012) ACCELERATED LIFE TEST OF ELECTRIC HEATING WIRES AND ROLLED WIRES
KS X 5623-2006 Standard color test suite for the determination of consumable yield for color electrophotographic/inkjet printers and multi-function devices thatcontain printer components
KS C 2001-1998(2018)
KS B 5001-2017(2022) Life test method for cold portable water meter with electronic device
KS D 0265-1989 Measurement of minority carrier life time in germanium by photoconductive decay method
KS M ISO 10364-2004(2019) Adhesives－Determination of working life(pot life) of multi-component adhesives
KS B ISO 13212:2005 Ophthalmic optics-Contact lens care products-Guidelines for determination of shelf-life
KS D 0257-2002(2022) Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS B ISO 13212:2015 Ophthalmic optics－Contact lens care products－Guidelines for determination of shelf-life
KS C 2000-2003 TEST METHOD OF THERMAL LIFE EVALUATION OF SOLID ELECTRICAL INSULATING MATERIALS BY DIELECTRIC STRENGTH
KS D 0257-2002 Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS C IEC 60255-15-2004(2009) Electrical relays－Part 15：Endurance tests for electrical relay contacts－Specification for the characteristics of test equipment

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, test my life

JEDEC JEP79-1969 Life Test Methods for Photoconductive Cells
JEDEC JESD22-A100C-2007 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD22-A100D-2013 Cycled Temperature-Humidity-Bias Life Test
JEDEC JESD226-2013 RF BIASED LIFE (RFBL) TEST METHOD
JEDEC JESD22-A100E-2020 Cycled Temperature-Humidity-Bias with Surface Condensation Life Test
JEDEC JESD22-A100-B-2000 Cycled Temperature-Humidity-Bias Life Test
JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits

SAE - SAE International, test my life

SAE J240-1982 Life Test for Automotive Storage Batteries
SAE J240-1971 LIFE TEST FOR AUTOMOTIVE STORAGE BATTERIES
SAE J240-2007 Life Test for Automotive Storage Batteries
SAE J240-1993 Life Test for Automotive Storage Batteries (June 1993)
SAE USCAR20-2001 Field Correlated Life Test Supplement to SAE/USCAR-2
SAE J2801-2007 Comprehensive Life Test for 12 V Automotive Storage Batteries
SAE J2801-2018 Comprehensive Life Test for 12 V Automotive Storage Batteries
SAE ARP1894A-1998 Useful Life Determination for Chemical Oxygen Generators

Society of Automotive Engineers (SAE), test my life

SAE J240-2002 Life Test for Automotive Storage Batteries
SAE ARP7519-2023 Potential Usage of Life Test Samples for Flight
SAE J2288-2020 Life Cycle Testing of Electric Vehicle Battery Modules
SAE J2288-2008 Life Cycle Testing of Electric Vehicle Battery Modules
SAE J240-2012 Life Test for Automotive Storage Batteries
SAE J2801-2013 Comprehensive Life Test for 12 V Automotive Storage Batteries
SAE USCAR20-1-2004 Field correlated life test - Supplement to SAE/USCAR 2
SAE USCAR20-2-2022 FIELD CORRELATED LIFE TEST SUPPLEMENT TO SAE/USCAR-2
SAE ARP1894A-2013 Useful Life Determination for Chemical Oxygen Generators
SAE ARP1894B-2014 Useful Life Determination for Chemical Oxygen Generators
SAE USCAR20-2004 Field correlated life test - Supplement to SAE/USCAR 2

Electronic Components, Assemblies and Materials Association, test my life

ECA IS-749-1998 Rectified Mains Application Expected Wear-Out Lifetime Test
ECA 186-12E-1978 Passive Electronic Component Parts, Test Methods for; Method 12: Heat-Life Test

Illuminating Engineering Society of North America, test my life

IESNA LM-40-2010 Approved Method for the Life Testing of Fluorescent Lamps
IESNA LM-49-2001 Approved Method for Life Testing of Incandescent Filament Lamps
IESNA LM-49-2012 Approved Method for Life Testing of Incandescent Filament Lamps
IESNA LM-60-2001 Approved Method of Life Testing of Low Pressure Sodium Lamps
IESNA LM-40-2001 Approved Method for Life Testing of Fluorescent Lamps
IESNA LM-65-2014 Approved Method Life Testing of Single-Based Fluorescent Lamps
IESNA LM-65-2001 IESNA Approved Method for Life Testing of Compact Fluorescent Lamps
IESNA LM-47-2001 Approved Method for Life Testing of High Intensity Discharge (HID) Lamps
IESNA LM-47-2012 Approved Method for Life Testing of High Intensity Discharge (HID) Lamps

Association Francaise de Normalisation, test my life

NF T76-147:2010 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives.
NF ISO 3685:1993 Essai de durée de vie des outils de tournage à partie active unique
NF E66-505*NF ISO 3685:1993 Tool-life testing with single-point turning tools.
NF ISO 8688-1:1989 Essai de durée de vie des outils de fraisage - Partie 1 : surfaçage
NF ISO 8688-2:1989 Essai de durée de vie des outils de fraisage - Partie 2 : fraisage combiné.
NF ISO 15686-2:2012 Bâtiments et biens immobiliers construits - Conception prenant en compte la durée de vie - Partie 2 : procédures pour la prévision de la durée de vie
NF S11-808*NF EN ISO 11987:2012 Ophtalmic optics - Contact lenses - Determination of shelf-life
NF S11-808:1998 Ophthalmic optics. Contact lenses. Determination of shelf-life.
NF EN 1156:2013 Panneaux à base de bois - Détermination des facteurs de durée de charge et de fluage
NF EN ISO 9664:1995 Adhésifs - Méthodes d'essai de tenue à la fatigue d'adhésifs structuraux en traction-cisaillement.
NF P85-581*NF ISO 4781:2022 Building and civil engineering sealants - Determination of application life
NF E22-514*NF ISO 13939:2019 Foil bearings - Performance testing of foil journal bearings - Testing of static load capacity, friction coefficient and lifetime
NF EN 4057-402:2015 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 402 : durée de vie
NF EN 60749-23:2004 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 23 : durée de vie en fonctionnement à haute température
NF EN 60749-23/A1:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 23 : durée de vie en fonctionnement à haute température
NF EN 302-7:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 7 : détermination de la durée d'utilisation dans des conditions de référence
NF EN 1015-9/A1:2007 Méthodes d'essai des mortiers pour maçonnerie - Partie 9 : détermination de la durée pratique d'utilisation (DPU) et du temps ouvert (TO) du mortier frais
NF EN 1015-9:2000 Méthodes d'essai des mortiers pour maçonnerie - Partie 9 : détermination de la durée pratique d'utilisation (DPU) et du temps ouvert (TO) du mortier frais
NF ISO 13939:2019 Paliers-feuilles - Essais de performance des paliers radiaux à feuilles non lubrifiés - Essais de la capacité de charge statique, du coefficient de frottement et de la durée de vie
NF T76-007*NF EN ISO 10364:2018 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives
NF EN ISO 10364:2018 Adhésifs structuraux - Détermination de la vie en pot (durée d'utilisation) des adhésifs multicomposants
NF T76-152-7*NF EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7 : determination of the working life under referenced conditions
NF P12-309*NF EN 1015-9:2000 Methods of test for mortar for masonry - Part 9 : determination of workable life and correction time of fresh mortar
NF P12-309/A1*NF EN 1015-9/A1:2007 Methods of test for mortar for masonry - Part 9 : determination of workable life and correction time of fresh mortar
NF P98-231-5:1997 Tests relating to pavements. Compaction tests on non bituminous materials. Part 5 : workability time limit determination of granular materials bound with cementitious binders using sonic examination.

RU-GOST R, test my life

GOST R 50865-1996 Rails. Method for test on corrosion fatigue life
GOST 261-1979 Rubber. Methods of determination fatigue life for repeated stretching
GOST R 51372-1999 Accelerated life and storable life tests methods in special aggresive and other special medias for technical products, matherial and sistems of matherials. General
GOST 32208-2013 Springs of spring suspension of railway rolling stock. Method of fatigue life tests
GOST 19438.21-1979 Low-power electronic tubes and valves for output cascades of TV line scanninp. Methods of measurement of electrice parametres and test for service time
GOST R 51910-2002 Research and testing strategy by accelerated methods of environmental conditions influence for industrial products longevity and storage ability. Development and design
GOST 30779-2001 Insulating glass units for building. Method of determination of resistance to atmospheric effects and estimation of life circle
GOST 30973-2002 Polyvinylchloride profiles for windows and doors. Method of determination of resistance to climatic effects and estimation of life circle

KR-KS, test my life

KS B ISO 3685-2018 Tool-life testing with single-point turning tools
KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, test my life

GB/T 2689.2-1981 Life test and acceleration life test charts-Evaluation of their Weibull distributions
GB/T 2689.3-1981 Life test and acceleration life test--Simple linear deflection-free evaluation of Weibull distributions
GB/T 2689.4-1981 Life test and acceleration life test--Optimal linear deflection-free evaluation of Weibull distributions
GB/T 42260-2022 Electrochemical performance test of lithium iron phosphate—Test method for cycle life
GB/T 27800-2011 Determination of the life for static sealing rubber products
GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
GB/T 26068-2010 Test method for carrier recombination lifetime in silicon wafers by non-contact measurement of photoconductivity decay by microwave reflectance
GB/T 1553-2023 Determination of Minority Carrier Lifetime in Silicon and Germanium by Photoconductivity Decay Method
GB/T 26068-2018 Measurement of Carrier Recombination Lifetime of Silicon Wafer and Ingot Non-contact Microwave Reflection Photoconductivity Decay Method
GB/T 42907-2023 Non-contact eddy current induction method for testing non-equilibrium carrier recombination lifetime in silicon ingots, blocks and wafers
GB/Z 42085-2022 Pneumatic fluid power—Assessment of component reliability by accelerated life testing—General guidelines and procedures
GB/T 14598.5-1993 Electrical relays. Part 15: Endurance tests for electrical relay contacts. Specification for the characteristics of test equipment

American National Standards Institute （ANSI), test my life

ANSI/ASME B94.55M-1985 Tool Life Testing with Single-Point Turning Tools
ANSI/SAE J240-1993 Automotive Storage Batteries, Life Test for
ANSI/IEEE 101:1995 Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/ASTM E2696:2009 Specification For Life And Reliability Testing Based On The Exponential Distribution
ANSI/TIA/EIA 455-130-2001 Elevated Temperature Life Test for Laser Diodes
ANSI PH3.711-1985 Photography (Projection Equipment) - Slide Projectors - Life Testing
ANSI/EIA 364-22B:2000 Simulated Life Test Procedure for Electrical Connectors
ANSI/DASMA 109-2001 Standard Method for Testing Sectional Garage Doors: Determination of Life Cycling Performance
ANSI/ASTM E2696:2021 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ANSI/EIA 364-17C:2011 Temperature Life with and without Electrical Load Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-17B:1999 Electric Connectors – Temperature Life With or Without Electrical Load Test Procedure for Electrical Connectors
ANSI/ASTM F555:2006 Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ANSI/ASTM F884:2011 Test Method For Motor Life Evaluation Of A Built-In Central Vacuum Cleaner

American Society of Mechanical Engineers (ASME), test my life

ASME B94.55M-1985 Tool Life Testing with Single-Point Turning Tools Revision of ANSI B94.34-1946 and B94.36-1956
ASME B94.55M-1985(R2019) Tool Life Testing with Single - Point Turning Tools

International Organization for Standardization (ISO), test my life

ISO 3685:1993 Tool-life testing with single-point turning tools
ISO 3685:1977 Tool-life testing with single-point turning tools
ISO 11987:1997 Ophthalmic optics - Contact lenses - Determination of shelf-life
ISO 11987:2012 Ophthalmic optics - Contact lenses - Determination of shelf-life
ISO 4781:2022 Building and civil engineering sealants — Determination of application life
ISO/TR 19811:2017 Gas cylinders - Service life testing for cylinders and tubes of composite construction
ISO 10364:2007 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives
ISO 10364:2015 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives
ISO 11987:1997/Cor 1:1998 Ophthalmic optics - Contact lenses - Determination of shelf-life; Technical Corrigendum 1
ISO 13212:2011 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life
ISO 13212:1999 Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life
ISO/DIS 10364 Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
ISO 13212:2014 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life
ISO 9514:2019 Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing
ISO 13939:2019 Foil bearings — Performance testing of foil journal bearings — Testing of static load capacity, friction coefficient and lifetime
ISO/TR 16194:2017 Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures

YU-JUS, test my life

JUS K.A1.001-1980 Tool-life testing with single-point turning tools
JUS E.M8.025-1987 Determination of durability in bakery yeast

Japanese Industrial Standards Committee (JISC), test my life

JIS C 5036:1975 Endurance (electrical) testing method for electronic components
JIS C 5037:1975 Endurance (mechanical) testing method for electronic components
JIS B 4012:1961 Method of life test for single point tools
JIS C 8802:2003 Accelerated life test methods for phosphoric acid fuel cell
JIS C 2524:1997 Accelerated life test of electric heating wires and rolled wires
JIS B 4011:1971 Method of life test for single point carbide tools
JIS K 6870:2001 Adhesives -- Determination of working life (pot life) of multi-component adhesives
JIS K 6870:2008 Adhesives -- Determination of the pot life (working life) of multi-component adhesives
JIS H 0604:1995 Measuring of minority-carrier lifetime in silicon single crystal by photoconductive decay method

TIA - Telecommunications Industry Association, test my life

TIA/EIA-455-4B-1993 FOTP-4 Fiber Optic Component Temperature Life Test

IEC - International Electrotechnical Commission, test my life

PAS 62164-2000 Guidelines for GaAs MMIC and FET Life Testing (Edition 1.0)
PAS 62161-2000 Steady State Temperature Humidity Bias Life Test (Edition 1.0)

Group Standards of the People's Republic of China, test my life

T/CEEIA 649-2022 Method of mobile robot life test and evaluation
T/CMES 25004-2018 Accelerated life test method for automatic monitoring equipment of water pollution sources
T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
T/CSTM 00359-2021 Chemical life test method of bentonite ,tourmaline catalyst for flue gas denitration
T/CES 176-2022 Evaluation method for lifetime of stationary proton exchange membrane fuel cell stack
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
T/ZZAS 006-2019 Requirements and test methods for DC internal resistance life test of power lithium-ion batteries for electric vehicles

Electronic Components, Assemblies and Materials Association, test my life

ECA EIA-364-22B-2000 TP-22B Simulated Life Test Procedure for Electrical Connectors
ECA EIA/ECA-364-22B-2000 TP-22B Simulated Life Test Procedure for Electrical Connectors
ECA EIA-364-17B-1999 TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets
ECA EIA-364-17C-2011 TP-17C TEMPERATURE LIFE WITH OR WITHOUT ELECTRICAL LOAD TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS

International Electrotechnical Commission (IEC), test my life

IEC PAS 62164:2000 Guidelines for GaAs MMIC and FET life testing
IEC PAS 62161:2000 Steady state temperature humidity bias life test
IEC 60749-23:2011 Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life

National Sanitation Foundation (NSF), test my life

NSF 418-2014 Residential Wastewater Effluent Filters Longevity Testing

Military Standard of the People's Republic of China-General Armament Department, test my life

GJB 9876-2020 Thermal cycle life test method of thermal barrier coating
GJB 736.14-1991 Test methods for pyrotechnics Long-term storage life determination
GJB 983.7-1993 Military Rubber Film Test Method Fatigue Life Determination

GB-REG, test my life

REG NASA-LLIS-0610--1999 Lessons Learned ?Long-Term Life Testing of Spacecraft Components

(U.S.) Telecommunications Industries Association , test my life

TIA-455-130-2001 Elevated Temperature Life Test for Laser Diodes
TIA-455-130-2007(2014) Elevated Temperature Life Test for Laser Diodes
TIA/EIA-455-4C-2002 FOTP-4 Fiber Optic Component Temperature Life Test
TIA-5005-2014 Battery Life Measurement Methodology of cdma2000 1x and cdma2000 HRPD Mobile Stations

邮电部, test my life

YD/T 608-1992 Life test method for vertical and horizontal connectors

ECIA - Electronic Components Industry Association, test my life

IS-749-1998 Rectified Mains Application Expected Wear-Out Lifetime Test
186-12E-1978 Passive Electronic Component Parts@ Test Methods for; Method 12: Heat-Life Test
364-17A-1987 TP-17A Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors
EIA-364-17B-1999 TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets
EIA-364-17C-2011 TP-17C TEMPERATURE LIFE WITH OR WITHOUT ELECTRICAL LOAD TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS

Institute of Electrical and Electronics Engineers (IEEE), test my life

IEEE/ANSI 101-1987 IEEE Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/IEEE Std 101-1987(R2010) IEEE Guide for the Statistical Analysis of Thermal Life Test Data
IEEE PC57.157/D6.3, July 2015 IEEE Approved Draft Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid Transformers
IEEE Std 1458-2005 (R2010) IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE Std C57.157-2015 IEEE Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid--Immersed Transformers
IEEE P1458/D8, June 2017 IEEE Draft Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE PC57.157/D6.2, May 2015 IEEE Draft Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid Transformers
IEEE P1458/D6.1 May, 2017 IEEE Draft Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE Std 1458-2017 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded-Case Circuit Breakers for Industrial Applications - Redline
IEEE Std 101A-1974 IEEE Simplified Method for Calculation of the Regression Line (Appendix to IEEE Guide for the Statistical Analysis of Thermal Life Test Data, IEEE Std 101-1972)
IEEE 101A-1974 IEEE Simplified Method for Calculation of the Regression Line (Appendix to IEEE Guide for the Statistical Analysis of Thermal Life Test Data, IEEE Std 101-1972)

ECMA - European Association for Standardizing Information and Communication Systems, test my life

379-2008 Test Method for the Estimation of the Archival Lifetime of Optical Media (2nd Edition)
379-2010 Test Method for the Estimation of the Archival Lifetime of Optical Media (3rd Edition)
379-2007 Test Method for the Estimation of the Archival Lifetime of Optical Media (1st Edition)
396-2014 Test Method for the Estimation of Lifetime of Optical Disks for Long-term Data Storage (3rd Edition)
396-2017 Test Method for the Estimation of Lifetime of Optical Disks for Long-term Data Storage (4th Edition)
396-2010 Test Method for the Estimation of Lifetime of Optical Media for Long-term Data Storage (1st Edition)

American Society for Testing and Materials (ASTM), test my life

ASTM F922-01 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM F555-01(2016) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM E2696-09(2013) Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM E2696-09 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM E2696-09e1 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM C1247-09 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C1247-98(2004) Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C1247-98 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C1247-14 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM F884-01(2006) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM F884-01(2011) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM F884-01(2016) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM F922-01(2023) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM D3337-91(1996) Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
ASTM E1949-98 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM F922-01(2011) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM D3527-11 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM E1949-03 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-03(2014) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-03(2014)e1 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM E1949-21 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM B76-90(1995)e1 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM B76-90(2018) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM D1337-96 Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength
ASTM F1373-93(1999) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1373-93(2020) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM D3527-95 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3527-02 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3527-07e1 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM F1373-93(2005) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1373-93(2012) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1601-01(2011) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
ASTM F1601-96 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
ASTM F1601-01(2016) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
ASTM F922-95 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM C603-04 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C603-90(1997)e1 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM F922-01(2006) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM C603-14(2019) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM F922-01(2016) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
ASTM C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM B78-90(2013) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM C603-14 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM D3336-20a Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D2981-94(2003) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D3336-20 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-18 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3527-18 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3336-17 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3527-23 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM B78-90(2019) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM D3527-21 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3527-15 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D2981-94(2014) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM F555-01(2023) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM D3337-91(2002) Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
ASTM E2696-21 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
ASTM F555-95 Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM F555-01 Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM F1038-98 Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
ASTM D3527-07 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM F555-01(2006) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM F555-01(2011) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
ASTM F1038-02(2016) Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
ASTM F1692-01(2016) Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
ASTM D3336-97 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-05 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-05e1 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-97(2002)e1 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D2981-94(2009) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D3336-05(2010) Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D3336-05(2015) Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM F884-01(2023) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM E632-82(1996) Standard Practice for Developing Accelerated Tests to Aid Prediction of the Service Life of Building Components and Materials (Withdrawn 2005)
ASTM E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM B76-90(2013) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM D2981-94(1998) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D2981-94(2019) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM E1949-02 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
ASTM D1338-99 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D1338-99(2005) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D1337-10 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM C1850-17 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
ASTM F2661-07 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM F2661-07(2022) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM D1337-10(2016) Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D1337-04 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM F1038-02(2011) Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
ASTM F2661-07(2015) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM F1601-01(2023) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
ASTM F884-01 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM F884-96 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
ASTM C1850-17(2021) Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems

British Standards Institution (BSI), test my life

PD ISO/TR 19811:2017 Gas cylinders. Service life testing for cylinders and tubes of composite construction
BS EN ISO 11987:2012 Ophthalmic optics. Contact lenses. Determination of shelf-life
BS EN 302-7:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the conventional working life
BS EN 455-4:2009 Medical gloves for single use Part 4: Requirements and testing for shelf life determination
BS ISO 4781:2022 Building and civil engineering sealants. Determination of application life
BS EN 302-7:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
21/30419510 DC BS ISO 4781. Building and civil engineering sealants. Determination of application life
BS EN 1015-9:1999 Methods of test for mortar for masonry - Determination of workable life and correction time of fresh mortar
BS 7044 Sec.2.3:1990 Artificial sports surfaces. Methods of test. Methods for determination of durability
BS ISO 13939:2019 Tracked Changes. Foil bearings. Performance testing of foil journal bearings. Testing of static load capacity, friction coefficient and lifetime
BS ISO 22423:2019 Foil bearings. Performance testing of foil thrust bearings. Testing of static load capacity, bearing torque, friction coefficient and lifetime
BS EN 14022:2010 Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives
BS EN 14022:2003 Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives
BS CWA 15693:2007 Saving lifetimes of energy efficiency improvement measures in bottom-up calculations
BS EN ISO 10364:2018 Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
BS EN 60749-5:2017 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Steady-state temperature humidity bias life test
BS EN 302-7:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
BS EN 62341-5-3:2013 Organic Light Emitting Diode (OLED) displays. Measuring methods of image sticking and lifetime
BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
12/30252886 DC BS ISO 10364. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
PD ISO/TR 16194:2017 Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
BS EN 376:2002 Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing
22/30435792 DC BS EN ISO 10364. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
21/30439589 DC BS EN 302-7. Adhesives for load-bearing timber structures. Test methods. Part 7. Determination of the working life under referenced conditions

Electronic Industrial Alliance (U.S.), test my life

EIA RS-186-12E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 12: HEAT-LIFE TEST

BR-ABNT, test my life

ABNT NBR ISO 8688-2:2020 Tool life testing in milling Part 2: End milling

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., test my life

IEEE 101-1972 GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA (R 1982)
IEEE 1458-2017 Recommended Practice for the Selection@ Field Testing@ and Life Expectancy of Molded-Case Circuit Breakers for Industrial Applications
IEEE 1458-2005 Recommended Practice for the Selection@ Field Testing@ and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications

国家市场监督管理总局、中国国家标准化管理委员会, test my life

GB/T 37929-2019 Non-destructive testing instruments—Testing methods for life of X-ray tubes
GB/T 27800-2021 Determination of the life for static sealing rubber products
GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
GB/T 38914-2020 Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application
GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
GB/T 40116-2021 Foil bearings—Performance of hydrodynamic gas journal bearings—Testing of static load capacity, friction coefficient and lifetime

Professional Standard - Electron, test my life

SJ 2664-1986 Test methods of accelerated life test for helium-neon laser devices
SJ/Z 9073.3-1987 Electrical relays--Part 15: Enderance tests for electrical relay contacts--Specification for the characterics of test equipment

European Committee for Standardization (CEN), test my life

EN ISO 11987:2012 Ophthalmic optics - Contact lenses - Determination of shelf-life
EN 455-4:2009 Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
EN ISO 11987:1997 Optics and Optical Instruments - Contact Lenses - Determination of Shelf-Life ISO 11987: 1997
EN ISO 13212:2014 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO 13212:2014)
EN 13212:2011 Road marking materials - Requirements for factory production control
EN ISO 13212:2011 Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life
EN 3841-306:2004 Aerospace series - Circuit breakers - Test methods - Part 306: Service life
EN 14022:2003 Structural adhesives Determination of the pot life (working life) of multicomponent adhesives
EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
prEN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 4057-402:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle
EN 376:2002 Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Self-Testing
prEN ISO 10364 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO/DIS 10364:2022)
EN 3745-410:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life

German Institute for Standardization, test my life

DIN 50440:1998 Testing of materials for semiconductor technology - Measurement of carrier lifetime in silicon single crystals - Recombination carrier lifetime at low injection by photoconductivity method
DIN 53533-1:1988-07 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
DIN 53533-3:1988-07 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer
DIN 53533-2:1988-07 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); rotary flexometer
DIN EN 12727:2001 Furniture - Ranked seating - Test methods and requirements for strength and durability; German version EN 12727:2000
DIN EN 60749-23:2011-07 Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life (IEC 60749-23:2004 + A1:2011); German version EN 60749-23:2004 + A1:2011 / Note: DIN EN 60749-23 (2004-10) remains valid alongside this standard unt...
DIN EN ISO 10364:2018-06 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015); German version EN ISO 10364:2018 / Note: To be replaced by DIN EN ISO 10364 (2022-12).
DIN EN 60749-5:2018-01 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test (IEC 60749-5:2017); German version EN 60749-5:2017 / Note: DIN EN 60749-5 (2003-09) remains valid alongside this standard until 2020...
DIN 53533-1:1988 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
DIN EN 302-7:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2023
DIN 53533-3:1988 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer
DIN 53533-2:1988 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); rotary flexometer
DIN EN 3745-410:2016-11 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life; German and English version EN 3745-410:2015
DIN EN ISO 10364:2018 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
DIN EN 455-4:2009 Medical gloves for single use - Part 4: Requirements and testing for shelf life determination; English version of DIN EN 455-4:2009-10
DIN EN ISO 11987:2012 Ophthalmic optics - Contact lenses - Determination of shelf-life (ISO 11987:2012); German version EN ISO 11987:2012
DIN EN 62341-5-3:2014-06 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime (IEC 62341-5-3:2013); German version EN 62341-5-3:2013

AREMA - American Railway Engineering and Maintenance-of-Way Association, test my life

CHAPTER 3/PART 3-1975 Tie Tests and the Economics of Service Life (Volume 1/Track)

工业和信息化部, test my life

JC/T 2657-2022 Test method for cycle life of inorganic hydrated salt phase change materials
SJ/T 11461.5.3-2016 Organic light-emitting diode display devices Part 5-3: Test methods for afterimage and lifetime

NEMA - National Electrical Manufacturers Association, test my life

NEMA IB 3-1983 CYCLE LIFE TESTING OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
NEMA IB 5-1987 LIFE TESTING OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES (WITH FREE ELECTROLYTE) FOR STATIONARY SERVICE

Professional Standard - Machinery, test my life

JB/T 5217-1991 Test method and acceptance condition of tap life
JB/T 5614-1991 Test method and acceptance condition for saw blade and milling cutter life

机械电子工业部, test my life

JB 5217-1991 Test methods for tap life and its acceptance conditions
JB 5614-1991 Test methods and acceptance conditions for saw blade milling cutter life

AENOR, test my life

UNE 36423:1990 TESTS ON STEELS. MACHINABILITY INDEX DETERMINATION. TURNING METHODS BY SHORT TIME TOOL-LIFE TESTING
UNE-EN 14022:2010 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives
UNE-EN 1015-9:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR.
UNE-EN 60749-5:2003 Semiconductor devices. Mechanical and climatic test methods. Part 5: Steady-state temperature humidity bias life test
UNE-EN 1015-9:2000/A1:2007 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
UNE-EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

IX-ECMA, test my life

ECMA 396-2014 Test Method for the Estimation of Lifetime of Optical Disks for Long-term Data Storage (3rd Edition)
ECMA 379-2008 Test Method for the Estimation of the Archival Lifetime of Optical Media 2nd Edition

Professional Standard - Energy, test my life

NB/SH/T 6010-2020 Determination of effective life of rolling bearing grease by FE9 method
NB/SH/T 6031-2021 Determination of lubricant friction performance and lubrication life SOT method

JP-JEITA, test my life

JEITA EDR-4704A-2007 Application guide of the accelerated life test for semiconductor devices

Professional Standard - Petrochemical Industry, test my life

SH/T 0428-2008 Standard test method for life of lubricating greases in ball bearings at elevanted temperatures

未注明发布机构, test my life

DIN EN 302-7:2004 Adhesives for load-bearing wooden components – Test methods – Part 7: Determination of service life
BS 3712-3:1974(2011) Building and construction sealants — Part 3 : Methods of test for application life, skinning properties and tack - free time
BS EN 1015-9:1999(2007) Methods of test for mortar for masonry — Part 9 : Determination of workable life and correction time of fresh mortar

ES-UNE, test my life

UNE-EN 3841-306:2004 Aerospace series - Circuit breakers - Test methods - Part 306: Service life (Endorsed by AENOR in April of 2005.)
UNE-EN ISO 10364:2018 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
UNE-EN 3745-410:2015 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life (Endorsed by AENOR in September of 2015.)

Professional Standard - Medicine, test my life

YY/T 0616.2-2016 Medical glove for single use.Part 2:Requirements and testing for shelf life determination

US-FCR, test my life

FCR COE REMR-CS-35 FINAL REPORT-1991 PREDICTING CONCRETE SERVICE LIFE IN CASES OF DETERIORATION DUE TO FREEZING AND THAWING

The American Road & Transportation Builders Association, test my life

AASHTO T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending
AASHTO T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending

AASHTO - American Association of State Highway and Transportation Officials, test my life

T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending
T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
T 321-2003 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending
R 93-2019 Standard Practice for Service Life Determination of Corrugated HDPE Pipes Manufactured with Recycled Content

Lithuanian Standards Office , test my life

LST EN 302-7-2004 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life
LST EN 14022-2010 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives
LST EN 1015-9-2002 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
LST EN 1015-9-2002/A1-2007 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
LST EN 60749-5-2004 Semiconductor devices - Mechanical and climatic test methods. Part 5: Steady-state temperature humidity bias life test (IEC 60749-5:2003)
LST EN 60749-23-2004 Semiconductor devices. Mechanical and climatic test methods. Part 23: High temperature operating life (IEC 60749-23:2004)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, test my life

GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., test my life

ASHRAE 4300-1999 Local Mean Age Measurements for Heating@ Cooling@ and Isothermal Supply Air Conditions
ASHRAE 4745-2005 Field Performance Assessment of VAV Control Systems to Determine the Longevity of Recommissioning (RP-1137)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, test my life

PREN 3841-306-2003 Aerospace Series Circuit Breakers Test Methods Part 306: Service Life (Edition P 3)
PREN 3841-306-1998 Aerospace Series Circuit Breakers Test Methods Part 306 : Service Life (Edition P 2)
PREN 3841-306-1996 Aerospace Series Circuit Breakers Test Methods Part 306 : Service Life (Edition P 1)

Danish Standards Foundation, test my life

DS/EN 14022:2010 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives
DS/EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
DS/EN 1015-9/A1:2007 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
DS/EN 1015-9:2002 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar

CEN - European Committee for Standardization, test my life

EN 302-7:2004 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life

AT-ON, test my life

OENORM EN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

BELST, test my life

STB 1333.1-2002 Polymer products for building. The method of determination of longevity of profile articles from polyvinyl chloride

American Welding Society (AWS), test my life

WRC 512:2006 Creep and Creep/Fatigue Crack Growth Modeling and Testing Methods Relevant to Life Assessment of Cracked Components

Aerospace, Security and Defence Industries Association of Europe (ASD), test my life

ASD-STAN PREN 3745-410-2014 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 410: Thermal life (Edition P 2)

(U.S.) Ford Automotive Standards, test my life

FORD FLTM BJ 101-04-2001 MEASUREMENT OF FILM LIFE AND ANTI-WEAR PROPERTIES OF GREASES AND DRY FILM LUBRICANTS (Replaces FLTM BJ 001-04)