ZH
RU
ES

test my profile

test my profile, Total:172 items.

In the international standard classification, test my profile involves: Information technology (IT) in general, Electrical engineering in general, Environmental protection, Road vehicle systems, Laboratory medicine, Air quality, Diagnostic, maintenance and test equipment, Electromagnetic compatibility (EMC), Medical equipment, Construction materials, Protection against electric shock, Fibre optic communications, Semiconductor devices, Products of the chemical industry, Analytical chemistry, Components and accessories for telecommunications equipment, Environmental testing, Electrical wires and cables, Audio, video and audiovisual engineering, Linear and angular measurements, Road vehicles in general, Elements of buildings, Printed circuits and boards, Electronic components in general, Insulating materials, Welding, brazing and soldering, Thermodynamics and temperature measurements, Rubber, Insulating fluids, Optoelectronics. Laser equipment, Piezoelectric and dielectric devices, Software development and system documentation, Particle size analysis. Sieving, Electrical accessories.

SAE - SAE International, test my profile

SAE R-344-2009 An Introduction to Engine Testing and Development
SAE ARP159A-1976 Dielectric Testing of Spark Plugs

未注明发布机构, test my profile

BS 4550-3-1:1978(1999) Methods of testing cement — Part 3 : Physical tests — Section 3.1 Introduction
BS ISO/IEC 19896-1:2018 IT security techniques — Competence requirements for information security testers and evaluators Part 1 : Introduction, concepts and general requirements

Association Francaise de Normalisation, test my profile

NF EN ISO 3262-1:2020 Matières de charge - Spécifications et méthodes d'essai - Partie 1 : introduction et méthodes d'essai générales
NF EN 300019-2-0:2022 Ingénierie de l'environnement (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 2 : Spécification des essais d'environnement - Sous-partie 0 : introduction (V2.2.1)
NF C05-100-1*NF EN 62321-1:2014 Determination of certain substances in electrotechnical products - Part 1 : introduction and overview
NF ISO 48-1:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 1 : introduction et lignes directrices
NF S92-026*NF EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
NF EN 300019-1-0:2003 Télécommunications - Ingénierie des équipements (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 1-0 : classification des conditions d'environnement - Introduction (V2.1.2)
NF A06-000:1979 Statistical interpretation of interlaboratory tests. Simplified method applicable to maximum 20 laboratories and maximum 10 results per laboratory.
NF EN ISO/IEC 19896-1:2023 Techniques de sécurité IT - Exigences de compétence pour l'information testeurs d'assurance et les évaluateurs - Partie 1 : introduction, concepts et exigences générales
NF EN 62374:2008 Dispositifs à semiconductors - Essai de rupture diélectrique en fonction du temps (TDDB) pour films diélectriques de grille
NF EN 61338-1-3:2000 Résonateurs diélectriques à modes guidés - Partie 1-3 : informations générales et conditions d'essais - Méthode de mesure de la permittivité relative complexe des matériaux diélectriques pour les résonateurs diélectriques fonctionnant aux ...
NF EN 50375:2002 Méthodologie d'essai des moyens de nettoyage utilisés dans les huiles isolantes à usages électriques
NF EN 13286-1:2021 Mélanges traités et mélanges non traités aux liants hydrauliques - Méthode d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Partie 1 : introduction, exigences générales et échantillonnage

PL-PKN, test my profile

PN Z04111-01-1989 Air purity protection Microbiological testings Introduction and scope of the standard
PN C04551 ArkusZ00-1974 Wator and wa?t* wa?er Te?U for calfcium Introductton and rang? o? standard
PN C04586 ArkusZ01-1973 Wafer and waste wa?er Tei?s for iron In?roduc?ion and rang? of standard
PN C04546 ArkusZ00-1974 Wa?er and waste water Tests ?or mercury In?roduc?ion and scope of ihe standard
PN C04560 ArkusZ00-1974 Water and was?e water Tes?s for cadmium Introduction and scope of ?he standard
PN C04595 ArkusZ00-1974 Water and waste water Tests for lead Introduction and scope of the standard
PN C04612 ArkusZ00-1974 Wa?er and woste water Systematics o? testing In?roduction and rang? o? standard
PN C04633-01-1987 Water and waste water Test for carbon Introduction and scope of the standard
PN C45301-01-1993 Caprolactam Method of test Introduction and rang? of standard
PN C04591 ArkusZ00-1974 Water and was?e wa?er Tests for pofajsium Introduction and rang? of s?andard
PN Z04185-01-1988 Air purity protection Tests for iodine Introduction and scope of the standard
PN Z04186-01-1988 Air purity protection Tests for molybdenum Introduction and scope of the standard

ES-UNE, test my profile

UNE-EN ISO 3262-1:2021 Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020)
UNE-EN 62321-1:2013 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview (Endorsed by AENOR in October of 2013.)
UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
UNE-EN ISO/IEC 19896-1:2023 IT security techniques - Competence requirements for information security testers and evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-1:2018) (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN 13286-1:2022 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

German Institute for Standardization, test my profile

DIN EN ISO 3262-1:2020-07 Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020); German version EN ISO 3262-1:2020
DIN 53815:1989-05 Testing of textiles; definitions for the simple tensile test
DIN EN ISO 15197:2015-12 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013); German version EN ISO 15197:2015 / Note: DIN EN ISO 15197 (2013-11) remains valid alongside this stand...
DIN 10964:2014-11 Sensory analysis - Simple descriptive test
DIN EN ISO/IEC 19896-1:2022-10 IT security techniques - Competence requirements for information security testers and evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-1:2018); German and English version prEN ISO/IEC 19896-1:2022 / Note: Date of issu...
DIN EN 62374:2008-02 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007); German version EN 62374:2007
DIN EN 13286-1:2022-01 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German version EN 13286-1:2021
DIN EN 62321-1:2014 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview (IEC 62321-1:2013); German version EN 62321-1:2013
DIN 53483-1:1969-07 Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information

IT-UNI, test my profile

UNI 11621-6-2021 Unregulated professional activities - ICT professional role profiles - Part 6: ICT Professional role profiles for ICT metrics and measurement

NZ-SNZ, test my profile

AS/NZS 4547.0:2004 Methods of testing wool packs for greasy wool Part 0: Introduction and list of methods

European Committee for Standardization (CEN), test my profile

PR EN 54-1-1987 Components for Automatic Fire Detection Systems Part 1: Introduction
EN 376:2002 Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Self-Testing
EN ISO 18113-4:2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009)

British Standards Institution (BSI), test my profile

PD IEC TS 62153-4-1:2014+A1:2020 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Introduction to electromagnetic screening measurements
BS EN 62321-1:2013 Determination of certain substances in electrotechnical products. Introduction and overview
19/30395747 DC BS EN ISO 3262-1. Extenders. Specifications and methods of test. Part 1. Introduction and general test methods
12/30276356 DC BS EN 62153-4-1. Metallic communication cable test methods. Part 4-1. Introduction to electromagnetic (EMC) test methods
BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
BS EN 376:2002 Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing
BS EN ISO/IEC 19896-1:2023 IT security techniques. Competence requirements for information security testers and evaluators - Introduction, concepts and general requirements
PD IEC/TR 60721-4-0:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Introduction
BS EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets - Part 1: Introduction and roadmap for standardization
BS EN 13286-1:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS IEC 61196-1-125:2022 Coaxial communication cable - Electrical test methods. Test for equivalent permittivity and equivalent dissipation factor of dielectric
BS EN ISO 15197:2015 Tracked Changes. In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BS EN ISO 17641-2:2015 Tracked Changes. Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests
20/30410971 DC BS EN 13286-1. Unbound and hydraulically bound mixtures. Part 1. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS EN 61338-1-3:2000 Waveguide type dielectric resonators.. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
BS EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air. Testing flat sheet filter media

CZ-CSN, test my profile

CSN 37 0881-1954
CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
CSN 72 5033-1973 Tes.ting of fired ceramic rnaterials. Determination of medium temperatuie conductivity
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity

ETSI - European Telecommunications Standards Institute, test my profile

PRETS 300 019-A-1990 Equipment Engineering: Environmental Conditions and Environmental Tests for Telecommunications Equipment Part A - Introduction and Terminology
ETSI EN 300 019-2-0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-0 Specification of environmental tests; Introduction (V2.1.2)
PRETS 300 019-2-0-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
ETS 300 019- 2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
PRETS 300 019-2-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-0: Specification of Environmental Tests Introduction
PRETS 300 019-1-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
PRETS 300 019-1-0-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
ETS 300 019- 1-0-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-0: Classification of Environmental Conditions Introduction
ETSI EN 300 019-1-0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-10: Classification of environmental conditions; Introductions (V2.1.2)
TR 102 273-1-1-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (Using Test Site) and Evaluation of the Corresponding Measurement of Mobile Radio Equipment Characteristics; Sub-Part 1: Introduction (V1.2.1)

ESDU - Engineering Sciences Data Unit, test my profile

ESDU 73026 A-1977 Introduction to non-dimensional methods for the measurement of performance of turbine-engined helicopters.

RO-ASRO, test my profile

STAS SR ISO 1984-0:1984 Test conditions for milling machines wlth table of fixed height, with horizontal or vertical spindle. Part 0: Genemi introduction
STAS 8979-1971 Tests of metals SIMPLE BENDING TEST OF STEEL SHEETS AND STRIPS

CU-NC, test my profile

NC 04-15-1968 Simple torsión testing of steel wire

International Electrotechnical Commission (IEC), test my profile

IEC 62321-1:2013 Determination of certain substances in electrotechnical products .Part 1: Introduction and overview
IEC TS 62153-4-1:2014/AMD1:2020 Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC TS 62153-4-1:2014+AMD1:2020 CSV Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
IEC 61196-1-125:2022
Coaxial communication cable - Part 1-125: Electrical test methods - Test for equivalent permittivity and equivalent dissipation factor of dielectric

Korean Agency for Technology and Standards (KATS), test my profile

KS C IEC 62321-1-2014(2019) Determination of certain substances in electrotechnical products — Part 1: Introduction and overview
KS P ISO 15197:2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS R 3033-1984(2011) Simplified carbonmonoxide testers for automobiles
KS F 2586-2010 Standard test method for autogenous shrinkage and expansion of cement paste, mortar and concrete
KS M 1430-2013 Testing methods for performance evaluation of media
KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
KS F 2824-2016(2021) Simplified test method for determining shading coefficient of shading devices
KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
KS M 1426-2013 Testing methods for heavy metal extraction from media
KS C 2105-2003(2018)
KS F 2407-1968(1995) TESTING METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH CENTER-POINT LOADING)
KS P ISO 17593-2009(2019) Clinical laboratory testing and in vitro medical devices－Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., test my profile

IEEE 4-1942 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS
IEEE 4-1940 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS

Society of Automotive Engineers (SAE), test my profile

SAE ARP159A-1994 DIELECTRIC TESTING OP SPARK PLUGS
SAE AMS2610-2018 Pressure Testing, Gaseous Media Pressure as Specified

Association of German Mechanical Engineers, test my profile

VDI 3926 Blatt 1-2004 Testing of cleanable filter media - Standard test for the evaluation of cleanable filter media
VDI/VDE/DGQ 2618 Blatt 1-1991 Testing instructions for checking gauges and measuring tools; introduction

KR-KS, test my profile

KS P ISO 15197-2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS P ISO 15197-2017(2022) In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

Institute of Electrical and Electronics Engineers (IEEE), test my profile

AIEE No.4-1940 AIEE Standards for Measurement of Test Voltage in Dielectric tests
IEEE 1226.2-1993 Trial-use standard for Ada-based ATLAS-level test procedure interface for a broad-based environment for test (ABBET)

Danish Standards Foundation, test my profile

DS/EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
DS/IEC/TR 60721-4-0:2002 Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction
DS/EN 24869-3:1994 Acoustics. Hearing protectors. Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, test my profile

GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
GB/T 17308-1998 Definitions of parameters for simplified automatic measurement of television insertion test signals
GB/T 11297.11-2015 Test method for dielectric constant of pyroelectric materials
GB/T 3389.7-1986 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field

American Society for Testing and Materials (ASTM), test my profile

ASTM F1116-88(1995) Standard Test Method for Determining Dielectric Strength of Overshoe Footwear
ASTM F1116-21 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM F1116-14a Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM F1116-14 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM D4872-14(2020) Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM E430-19 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D4872-99 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM D4872-99(2004)e1 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM D4872-14 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM F1116-03 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM F1662-04 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM D3426-19 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves

Canadian Standards Association (CSA), test my profile

CAN/CSA-ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (Second Edition)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, test my profile

JEDEC JESD35-A-2001 Procedure for the Wafer-Level Testing of Thin Dielectrics
JEDEC JESD35-1-1995 General Guidelines for Designing Test Structures for the Wafer-Level Testing of Thin Dielectrics Addendum No. 1 to JESD35
JEDEC JESD35-2-1996 Test Criteria for the Wafer-Level Testing of Thin Dielectrics Addendum No. 2 to JESD35

Lithuanian Standards Office , test my profile

LST EN 62321-1-2014 Determination of certain substances in electrotechnical products -- Part 1: Introduction and overview (IEC 62321-1:2013)
LST EN 62374-2008 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007)

AENOR, test my profile

UNE-EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)

AT-ON, test my profile

ONORM S 1503 Teil.2-1980 Testing of textiles; simple tensile fest on Strips of textiles, non-woven textiles
ONORM S 1503 Teil.1-1980 Testing of textiles; simple tensile test on Strips of textiles fabrics; Fabrics, woven and ribbons

International Organization for Standardization (ISO), test my profile

ISO/IEC 19896-1:2018 IT security techniques — Competence requirements for information security testers and evaluators — Part 1: Introduction, concepts and general requirements
ISO 17593:2022 Clinical laboratory testing and in vitro medical devices — Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy

Professional Standard - Electron, test my profile

SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass

GOSTR, test my profile

GOST 34557-2019 Methods of testing the chemicals of human hazard. Testing of acute oral toxicity by intragastric admission. Up-and-down me

Standard Association of Australia （SAA）, test my profile

AS 3894.0.0:2002(R2013)
AS 4046.0:2002 Methods of testing roof tiles - Introduction and list of methods

ZA-SANS, test my profile

SANS 5502:2009 Burning test on cable dielectric and outer coverings

Professional Standard - Aerospace, test my profile

QJ 1708-1989 Dielectric Test Method for Resin Curing Process

RU-GOST R, test my profile

GOST ISO/IEC 19896-1-2021 Information technology. Security techniques. Competence requirements for information security testers and evaluators. Part 1. Introduction, concepts and general requirements

Japanese Industrial Standards Committee (JISC), test my profile

JIS A 1422:1993 Simplified test method for determining shading coefficient of shading devices
JIS A 1422:2015 Simplified test method for determining shading coefficient of shading devices
JIS A 1423:1983 Simplified test method for emissivity by infrared radio meter
JIS A 1423:2017 Simplified test method for normal emissivity by infrared radiation thermometer

Group Standards of the People's Republic of China, test my profile

T/CSTM 00986-2023 Test method for the complex permittivity of high-frequency dielectric substrates －Balanced-type circular disk resonator method
T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates－Split-cylinder resonator method

International Telecommunication Union (ITU), test my profile

ITU-T Q.3903-2008 Formalized presentation of testing results (Study Group 11)

SE-SIS, test my profile

SIS 11 26 10-1967 Simple bend testing of metals Plate and strip 3 mm and thicker, bar and wire

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, test my profile

CEPT T/CS 54-02 E-1986 Maintenance of Signalling System R2: Use of Simplified Test Equipment (ETR 255:1996)

IN-BIS, test my profile

IS 13621-1993 Determination of dielectric constant of wood under microwave frequencies. Method of test

American National Standards Institute （ANSI), test my profile

ANSI/ASTM D150:2018 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

BR-ABNT, test my profile

ABNT MB-1116-1979

UY-UNIT, test my profile

UNIT 74-1950

Electronic Industrial Alliance (U.S.), test my profile

EIA RS-186-4E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC CQMPONENT PARTS METHOD 4: DIELECTRIC TEST (WITHSTAND VOLTAGE)

ECMA - European Association for Standardizing Information and Communication Systems, test my profile

379-2008 Test Method for the Estimation of the Archival Lifetime of Optical Media (2nd Edition)
379-2010 Test Method for the Estimation of the Archival Lifetime of Optical Media (3rd Edition)
379-2007 Test Method for the Estimation of the Archival Lifetime of Optical Media (1st Edition)

CEN - European Committee for Standardization, test my profile

EN ISO 18113-4:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing

IPC - Association Connecting Electronics Industries, test my profile

IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band