ZH
RU
ES

Melting volume

Melting volume, Total:284 items.

In the international standard classification, Melting volume involves: Elements of buildings, Plastics, Linear and angular measurements, Electrical accessories, Materials for aerospace construction, Welding, brazing and soldering, Metalliferous minerals, Rubber, Non-metalliferous minerals, Production of metals, Products of the textile industry, Powder metallurgy, Semiconductor devices, Pipeline components and pipelines, Thermodynamics and temperature measurements, Testing of metals, Measurement of volume, mass, density, viscosity, Analytical chemistry, Non-destructive testing, Surface treatment and coating, Graphic technology, Agricultural machines, implements and equipment, Protective equipment, Refractories.

RO-ASRO, Melting volume

STAS 12388-1986 SILICO-ALUMINOUS REFRACTARY MASSES Rules and methods for quality checking up
STAS 9398-1983 FUSION WELDED STEEL JOINTS Quality classes
SR ISO 4440-2:1996 Thermoplastics pipes and fittings - Determination of melt mass flow rate - Part 2: Test conditions
STAS 9728/1-1987 Aircraft PRECISION FUSE-LINKS General technical requirements for quality
SR ISO 4440-1:1996 Thermoplastics pipes and fittings - Determination of melt mass flow rate - Part 1: Test method
STAS 8935-1990 CURRENT-LIMITING HIGH VOLTAGE FUSES General technical requirements for quality
STAS 452/1-1973 TYPE D-SCREW FUSES General technical requirements for quality

Taiwan Provincial Standard of the People's Republic of China, Melting volume

CNS 12034-2003 Fritted trace-elements (FTE) fertilizer
CNS 7514-1981 Method for Determination Tungsten in Ores (Melting Method)
CNS 14982-5-2007 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

SE-SIS, Melting volume

SIS SEN 30 07 17-1962 Gauge-pieces for fuses
SIS SS-EN 60 127-5-1991 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links

American National Standards Institute （ANSI), Melting volume

ANSI/GRHC/SPRI VR-1-2011 Procedure for Investigating Resistance to Root Penetration on Vegetative Roof Systems
ANSI/AWS A4.5M/A4.5:2012 Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld

Japanese Industrial Standards Committee (JISC), Melting volume

JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
JIS Z 3400:2013 Quality requirements for fusion welding of metallic materials
JIS K 7210:1995 Testing method for melt flow rate of thermoplastics
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal

German Institute for Standardization, Melting volume

DIN 41568-2:1963 Gauges for miniature fuses; depth gauge for fuse bases E16 250 V
DIN 43620-1:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN 43620-3:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse bases for LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN V 32538:2000 Welding - Implementation of EN 729 on quality requirements for fusion welding of metallic materials (CR 13576:1999)
DIN EN ISO 3834-2:2021-08 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021); German version EN ISO 3834-2:2021
DIN EN ISO 3834-3:2021-08 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021); German version EN ISO 3834-3:2021
DIN EN ISO 3834-4:2021-08 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021); German version EN ISO 3834-4:2021
DIN 43653:1976 High rupturing-capacity fuses for semi-conductor converters
DIN VDE 0820-5:1992 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links (IEC 60127-5:1988); german version EN 60127-5:1991
DIN 41568-1:1963 Gauges for miniature fuses E16 250 V; synopsis
DIN 43620-6:1987 Low-voltage high-rupturing-capacity fuses with blade contacts; bus-mounting fuse-bases, LV HRC bus-mounting fuse-disconnectors and LV HRC bus-mounting fuse-switches up to AC 660 V
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
DIN EN ISO 3834-6:2022-10 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/DIS 3834-6:2022); German and English version prEN ISO 3834-6:2022 / Note: Date of issue 2022-09-23*Intended as replacement for DIN-Fachberi...
DIN EN 348:1992 Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992
DIN 10294:1963 Butter melting beaker for the determination of water content in butter
DIN 43637-4:1992 Overhead-line house connection boxes for HRC-fuses size 00 up to 100 A 500 V and size 1 up to 250 A 500 V
DIN 49518:1979 Gauges C17, for concentricity of fuse-bases

Professional Standard - Aviation, Melting volume

HB 5375-1987 Aluminum and aluminum alloy fusion welding quality inspection
HB 5133-1979 30ＣｒＭNＳｉNｉ2A steel fusion welded joint quality inspection
HB 5135-2000 Structural steel and stainless steel fusion welded joint quality inspection
HB/Z 119-2011 Fusion weld process and quality inspection for aluminium and aluminium alloys
HB 5135-1979 Quality Inspection of Structural Steel and Stainless Steel Welded Joints (Trial)

International Organization for Standardization (ISO), Melting volume

ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements
ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
ISO 4503:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 4440-1:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method
ISO 4440-2:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions

Danish Standards Foundation, Melting volume

DS/EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
DS/EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
DS/EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
DS/ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements
DS/ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements
DS/CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834
DS/EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials – Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
DS/EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements (ISO 3834-4:2021)
DS/EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements (ISO 3834-3:2021)
DS/EN 24503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/ISO 4503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements
DS/EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)

RU-GOST R, Melting volume

GOST R ISO 15792-3-2010 Welding consumables. Test methods. Part 3. Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
GOST 21639.6-1993 Fluxes for electroslag remelting. Method for determination of phosphorus
GOST 21639.9-1993 Fluxes for electroslag remelting. Method for determination of carbon
GOST 21639.10-1976 Fluxes for electroslag remelting. Method for determination of sulphur
GOST 30801.5-2012 Miniature fuses. Guide lines for quality assessment of miniature fuse-links
GOST 23581.14-1979 Iron ores, concentrates, agglomerates and pellets. Method of determination of insoluble residue
GOST 21639.4-1993 Fluxes for electroslag remelting. Methods for determination of total iron
GOST 21639.1-1990 Fluxes for electroslag remelting. Methods for determination of moisture content
GOST R 55143-2012 Quality requirements for fusion welding of metallic materials. Part 6. Guidelines on implementing ISO 3834
GOST 22974.12-1996 Melted welding fluxes. Method of sulphur determination
GOST 22974.13-1996 Melted welding fluxes. Method of carbon determination
GOST 22974.12-1985 Melted welding fluxes. Method of sulphur determination
GOST 22974.13-1985 Melted welding fluxes. Method of carbon determination
GOST 22974.7-1996 Melted welding fluxes. Method of phosphorus determination
GOST 22974.7-1985 Melted welding fluxes. Method of phosphorus determination
GOST 22974.14-1990 Melted welding fluxes. Method for determination of moisture content
GOST 21639.2-1993 Fluxes for electroslag remelting. Methods for determination of aluminium oxide
GOST 21639.7-1993 Fluxes for electroslag remelting. Methods for determination of calcium fluoride
GOST 21639.12-1987 Fluxes for electroslag remelting. Methods for determination of manganous oxide
GOST R 50541-1993 Miniature fuses. Guide lines for quality assessment of miniature fuse-links
GOST 21639.5-1993 Fluxes for electroslag remelting. Method for determination of titanium dioxide
GOST 21639.8-1993 Fluxes for electroslag remelting. Methods for determination of silicon dioxide

Lithuanian Standards Office , Melting volume

LST EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
LST EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
LST EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
LST EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
LST EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
LST EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
LST EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
LST EN 24503-2001 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)
LST EN ISO 3834-1:2006 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)

AENOR, Melting volume

UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
UNE-EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
UNE-EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
UNE-EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
UNE-EN 60127-5:1994 MINIATURE FUSES. PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS.
UNE-CEN ISO/TR 3834-6:2008 IN Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007)
UNE-EN ISO 3834-1:2006 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)

ZA-SANS, Melting volume

SANS 1133:2008 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
SANS 10167:2004 The quality evaluation of fusion welded joints in steel structures
SANS 3834-2:2006 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
SANS 3834-3:2006 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
SANS 3834-4:2006 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements
SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

HU-MSZT, Melting volume

Association of German Mechanical Engineers, Melting volume

DVS 0712-1994

British Standards Institution (BSI), Melting volume

BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PD CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834
BS EN 60127-5:1991 Miniature fuses - Guide for the quality assessment of miniature fuse-links
BS EN 60127-5:2017 Miniature fuses. Guidelines for quality assessment of miniature fuse-links
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS EN ISO 3834-4:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Elementary quality requirements
BS EN ISO 3834-2:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
BS EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Elementary quality requirements
BS EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Standard quality requirements
BS EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements
BS EN ISO 3834-3:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Standard quality requirements
BS ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the enthalpy of fusion of crystallites
BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS EN ISO 3834-1:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements
22/30444977 DC BS EN ISO 3834-6. Quality requirements for fusion welding of metallic materials. Part 6. Guidelines on implementing ISO 3834
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
BS EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Criteria for the selection of the appropriate level of quality requirements

Standard Association of Australia （SAA）, Melting volume

AS/NZS ISO 3834.4:2008
AS/NZS ISO 3834.3:2008
AS/NZS ISO 3834.2:2008
AS/NZS ISO 3834.3:2023 Quality requirements for fusion welding of metallic materials, Part 3: Standard quality requirements
AS/NZS ISO 3834.4:2023 Quality requirements for fusion welding of metallic materials, Part 4: Elementary quality requirements
AS/NZS ISO 3834.2:1999 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS/NZS ISO 3834.4:1999 Quality requirements for welding - Fusion welding of metallic materials - Elementary quality requirements
AS/NZS ISO 3834.3:1999 Quality requirements for welding - Fusion welding of metallic materials - Standards quality requirements
AS/NZS ISO 3834.2:2023 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS/NZS ISO 3834.1:2008
AS/NZS ISO 3834.1:2023 Quality requirements for fusion welding of metallic materials, Part 1: Criteria for the selection of the appropriate level of quality requirements
AS/NZS ISO 3834.6:2019 Quality requirements for fusion welding of metallic materials, Part 6: Guidelines on implementing AS/NZS ISO 3834 series Standards

CL-INN, Melting volume

American Welding Society (AWS), Melting volume

AWS PRGQA-2001 The Practical Reference Guide for Welding Aluminum High-Quality Fusion Welding

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Melting volume

GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 1820-1979 Determination of tin content in tin concentrates--Beryllium as carrier-fusion with sodium peroxide iodate titrimetric method
GB/T 12467.2-2009 Quality requirements for fusion welding of metallic materials.Part 2:Comprehensive quality requirements
GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials.Part 3:Standard quality requirements
GB/T 12467.4-2009 Quality requirements for fusion welding of metallic materials.Part 4:Elementary quality requirements
GB/T 26050-2010 Hardmetals.Determination of contents of metallic elements by X-ray fluorescence.Fusion method
GB/T 9364.5-2011 Miniature fuses.Part 5: Guidelines for quality assessment of miniature fuse-links
GB/T 15927-1995 Method for chemical analysis of arsenic ores--Determination of arsenic content--Iodimetric method after pre-separation by fusion
GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials.Part 1:Criteria for the selection of the appropriate level of quality requirements
GB/T 12467.5-2009 Quality requirements for fusion welding of metallic materials.Part 5:Standard documents need to conform to claim conformity to the quality requirements
GB/T 6416-1986 Technical factors influencing the quality of the fusion welded joints in steel

CZ-CSN, Melting volume

CSN 72 1202-1986 Melting glass-sand. Quality
CSN 42 0673-1971 Determination of copper content on surface area of cladding layer

Military Standard of the People's Republic of China-General Armament Department, Melting volume

GJB/J 3050-1997 Calibration procedures for melting point measuring devices for explosives using the capillary method
GJB/J 3050-1997(XG1-2015) Modification of the calibration procedures for capillary method explosive melting point measuring devices 1-2015

Group Standards of the People's Republic of China, Melting volume

T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
T/GAMA 24-2022 Additive manufacturing Measurement of melt pool characteristics Single-camera colorimetry
T/NJ 1348-2023 Quality requirements for laser cladding iron-based self-fluxing alloy coating on rotary tiller
T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

IL-SII, Melting volume

S.I.230-1969 SCREWED ELECTRIC FUSES WITH FUSE LINK : QUALITY REQUIREMENTS

Association Francaise de Normalisation, Melting volume

NF A81-054-3*NF EN ISO 15792-3:2011 Welding consumables - Test methods - Part 3 : classification testing of positional capacity and root penetration of welding consumables in a fillet weld.
NF EN ISO 3834-4:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 4 : exigences de qualité élémentaire
NF EN ISO 3834-3:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 3 : exigences de qualité normale
NF EN ISO 3834-2:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 2 : exigences de qualité complète
FD CEN ISO/TR 3834-6:2009 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 6 : lignes directrices pour la mise en application de l'ISO 3834
NF C60-434:1991 Miniature fuses. Part 5 : guidelines for quality assessment of miniature fuse-links.
NF C60-434*NF EN 60127-5:2017 Miniature fuses - Part 5 : guidelines for quality assessment of miniature fuse-links
NF A88-110-1:2011 Qualification test of welders - Fusion welding - Part 1 : steels.
NF A89-250-3:2006 Quality requirements for fusion welding of metallic materials - Part 3 : standard quality requirements.
NF A89-250-3*NF EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3 : standard quality requirements
NF EN ISO 3834-1:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 1 : critères pour la sélection du niveau approprié d'exigences de qualité
NF A95-490*NF EN 24883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method.
FD A89-250-6*FD CEN ISO/TR 3834-6:2009 Quality requirements for fusion welding of metallic materials - Part 6 : guidelines on implementing ISO 3834

PL-PKN, Melting volume

PN E06170-05-1993 Miniature fuses. Guidelines for quality assessment of miniature fuse-links
PN-EN ISO 3834-2-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
PN-EN ISO 3834-4-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements (ISO 3834-4:2021)
PN-EN ISO 3834-3-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality requirements (ISO 3834-3:2021)
PN M48038 ArkusZ01-1974 Meaters and mel?ing ?anks ?or bituminous inders lasi?ication

Professional Standard - Textile, Melting volume

FZ/T 01081-2018 Test method for hot melt adhesive coating amount of fusible interlining
FZ/T 01081-2000 Determination of coating weight and uniform for fusible interlinings
FZ/T 01081-2009 Testing method for coating weight and uniform for fusible interlinings

AT-ON, Melting volume

ONORM E 6701-1988 Fuse-gauge pieces; D Ol, D 02, D 03 and handkey for gauge piece
OENORM EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
OENORM EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
OENORM EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
ONORM EN 348-1993 Protective clothing - Test method - Determination of behaviour of materials n impact of small splashes of molten metal

Korean Agency for Technology and Standards (KATS), Melting volume

KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS B ISO 3834-2-2016(2021) Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3-2016(2021) Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4-2016(2021) Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M ISO 1133-1-2012(2022) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS D ISO 4503:2003 Hardmetals-Determination of contents of metallic elements by X-ray fluorescence-Fusion method
KS C IEC 60127-5:2020 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M 1071-1-2007 Guide for determination of melting/freezing point for chemical substances
KS B ISO 3834-1-2016(2021) Quality requirements for fusion welding of metallic materials－Part 1：Criteria for the selection of the appropriate level of quality requirements
KS C IEC 60127-5:2003 Miniature fuses－Part 5：Guidelines for quality assessment of miniature fuse-links
KS L 3419-2015 Test method for determination of lead and cadmium content(pressure vessel)
KS L 3419-2005 Determination of lead and cadmium content in alumina raw powders(high pressure bomb digestion method)

VN-TCVN, Melting volume

TCVN 7506-2-2011 Quality requirements for fusion welding of metallic materials.Part 2: Comprehensive quality requirements
TCVN 7506-3-2011 Quality requirements for fusion welding of metallic materials.Part 3: Standard quality requirements
TCVN 7506-4-2011 Quality requirements for fusion welding of metallic materials.Part 4: Elementary quality requirements
TCVN 7506-1-2011 Quality requirements for fusion welding of metallic materials.Part 1: Criteria for the selection of the appropriate level of quality requirements
TCVN 6530-4-1999 Refractories.Methods of test.Part 4: Determination of pyrometric cone equivalent (refractoriness)
TCVN 7433-2-2004 Thermoplastics pipes and fittings.Determination of melt mass-flow rate.Part 2: Test conditions
TCVN 7433-1-2004 Thermoplastics pipes and fittings.Determination of melt mass-flow rate.Part 1: Test method

IT-UNI, Melting volume

UNI EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
UNI EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
UNI EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements

KR-KS, Melting volume

KS B ISO 3834-2-2016 Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3-2016 Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4-2016 Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS C IEC 60127-5-2020 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links
KS B ISO 3834-1-2016 Quality requirements for fusion welding of metallic materials－Part 1：Criteria for the selection of the appropriate level of quality requirements

ES-UNE, Melting volume

UNE-EN ISO 3834-2:2022 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
ISO/FDIS 3834-6:2023 Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834
UNE-EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
UNE-EN ISO 3834-3:2022 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
UNE-EN ISO 3834-4:2022 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
UNE-EN 348:1994 ERRATUM PROTECTIVE CLOTHING. TEST METHOD: DETERMINATION OF BEHAVIOUR OF MATERIALS ON IMPACT OF SMALL SPLASHES OF MOLTEN METAL.

BE-NBN, Melting volume

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics
NBN-EN 24503-1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method (ISO 4503:1978)
NBN C 61-127-5-1992 Miniature fuses Part 5 : Guidelines for quality assessment of miniature fuse-links

未注明发布机构, Melting volume

DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
GJB 905A-2019 Investment casting process quality control
BS PD CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials — Part 6 : Guidelines on implementing ISO 3834
BS EN 729-2:1995(1998) Quality requirements for welding — Fusion welding of metallic materials — Part 2 : Comprehensive quality requirements
BS EN 729-3:1995(1998) Quality requirements for welding Fusion welding of metallic materials — Part 3 : Standard quality requirements
BS EN 729-4:1995(1998) Quality requirements for welding — Fusion welding of metallic materials — Part 4 : Elementary quality requirements

CU-NC, Melting volume

NC 54-336-1985 Construction Materials and Prodvicts. Refractory Mortars. Quality Specifications
NC 33-48-1986 Oil and Oil Derivatives Soluble Oil. Quality Specifications
NC 44-05-1985 Ores. Sinterized Nickel Oxide. Quality Specifications
NC 54-303-1985 Construction Materials and Products. Fire-Clay and SemiAcid Refractories for Common Purposes. Quality Speoifications

American Society for Testing and Materials (ASTM), Melting volume

ASTM F1893-98(2003) Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
ASTM F1893-98 Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM C1276-94(1999) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
ASTM F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints

European Committee for Electrotechnical Standardization（CENELEC）, Melting volume

EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
HD 109.5 S1-1989 Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links

European Committee for Standardization (CEN), Melting volume

EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN 60127-5:1991 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links (IEC 127-5:1988)
EN 24503:1993 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; fusion method (ISO 4503:1978)
prEN ISO 3834-6 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/DIS 3834-6:2022)
EN 729-2:1994 Quality Requirements for Welding - Fusion Welding of Metallic Materials - Part 2: Comprehensive Quality Requirements
CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834

YU-JUS, Melting volume

JUS ISO 4503:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Melting volume

GJB 905-1990 Quality control for investment casting process.

IN-BIS, Melting volume

IS 2856-1979

GB-REG, Melting volume

REG NASA-LLIS-0660-2000 Lessons Learned ?Flow Fuses for Elimination of Hazards in Pneumatic and Hydraulic Systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Melting volume

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

NL-NEN, Melting volume

NEN-ISO 4503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method (ISO 4503:1978)
NEN 3513-1986 Refractory products Determination of pyrometric cone equivalent (refractoriness)

全国标准信息公共服务平台, Melting volume

GB/T 42401-2023 Laser cladding repair defect quality classification

International Electrotechnical Commission (IEC), Melting volume

IEC 60127-5:1988 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links
IEC 60127-5:2016 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

Professional Standard - Ferrous Metallurgy, Melting volume

YB/T 163-1999 Expendable thermocouples for the molten metal temperature fast measurement

Professional Standard - Machinery, Melting volume

JB/T 8392-1996 Xerographic dry toners melt index measurement

Defense Logistics Agency, Melting volume

DLA QPL-W-F-1814-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA W-F-1814 D-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA W-F-1814 D SUPP 1-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA QPL-W-F-1814-30-2005 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA QPL-W-F-1814-QPD-2010 Fuse, Cartridge, High-Interrupting Capacity
DLA QPL-W-F-1814-2011 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY