ZH
RU
ES

how to melt

how to melt, Total:495 items.

In the international standard classification, how to melt involves: Welding, brazing and soldering, Non-metalliferous minerals, Production of metals, Plastics, Electrical accessories, Linear and angular measurements, Agricultural machines, implements and equipment, Medical equipment, Metalliferous minerals, Products of the textile industry, Testing of metals, Materials for aerospace construction, Surface treatment and coating, Physics. Chemistry, Semiconductor devices, Analytical chemistry, Rubber, Construction materials, Refractories, Elements of buildings, Paints and varnishes, Pipeline components and pipelines, Non-destructive testing, Electronic display devices, Soil quality. Pedology, Non-ferrous metals, Graphic technology, Ferrous metals, Nuclear energy engineering, Ferroalloys, Thermodynamics and temperature measurements, Industrial furnaces, Protection against fire, Products of the chemical industry, Printed circuits and boards, Milk and milk products, Manufacturing forming processes, Insulating materials, Food products in general, Powder metallurgy, Protective equipment, Paint ingredients, Coals, Iron and steel products, Installations in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Quality, Electromechanical components for electronic and telecommunications equipment, Rubber and plastics products.

SE-SIS, how to melt

SIS SEN 30 07 17-1962 Gauge-pieces for fuses
SIS SS-EN 60 127-5-1991 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links

CZ-CSN, how to melt

CSN 72 1202-1986 Melting glass-sand. Quality
CSN 42 0673-1971 Determination of copper content on surface area of cladding layer
CSN 42 0617 Cast.6-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of antimony by the titrimetric method and atomic absorption method

RU-GOST R, how to melt

GOST 21639.6-1993 Fluxes for electroslag remelting. Method for determination of phosphorus
GOST 21639.9-1993 Fluxes for electroslag remelting. Method for determination of carbon
GOST 21639.10-1976 Fluxes for electroslag remelting. Method for determination of sulphur
GOST 21639.4-1993 Fluxes for electroslag remelting. Methods for determination of total iron
GOST 21639.1-1990 Fluxes for electroslag remelting. Methods for determination of moisture content
GOST 30801.5-2012 Miniature fuses. Guide lines for quality assessment of miniature fuse-links
GOST 21639.2-1993 Fluxes for electroslag remelting. Methods for determination of aluminium oxide
GOST 21639.7-1993 Fluxes for electroslag remelting. Methods for determination of calcium fluoride
GOST 21639.12-1987 Fluxes for electroslag remelting. Methods for determination of manganous oxide
GOST 21639.5-1993 Fluxes for electroslag remelting. Method for determination of titanium dioxide
GOST 21639.8-1993 Fluxes for electroslag remelting. Methods for determination of silicon dioxide
GOST 21639.3-1993 Fluxes for electroslag remelting. Methods for determination of calcium oxide and magnesium oxide
GOST 21639.11-1976 Flux for electroslag remelting. Method for the determination of lead, zinc, titanium, antimony
GOST 22974.12-1996 Melted welding fluxes. Method of sulphur determination
GOST 22974.13-1996 Melted welding fluxes. Method of carbon determination
GOST 22974.14-1990 Melted welding fluxes. Method for determination of moisture content
GOST 22974.12-1985 Melted welding fluxes. Method of sulphur determination
GOST 22974.13-1985 Melted welding fluxes. Method of carbon determination
GOST 22974.7-1996 Melted welding fluxes. Method of phosphorus determination
GOST 22974.7-1985 Melted welding fluxes. Method of phosphorus determination
GOST 22974.2-1996 Melted welding fluxes. Methods of silicon oxide determination
GOST 22974.3-1996 Melted welding fluxes. Methods of marganous oxide (II) determination
GOST 22974.4-1996 Melted welding fluxes. Method of aluminium oxide determination
GOST 22974.6-1996 Melted welding fluxes. Methods of iron oxide (III) determination
GOST 22974.8-1996 Melted welding fluxes. Methods of zirconium oxide determination
GOST 22974.9-1996 Melted welding fluxes. Methods of titanium oxide (IV) determination
GOST 22974.11-1996 Melted welding fluxes. Methods of calcium fluoride determination
GOST 22974.2-1985 Melted welding fluxes. Methods of silicon oxide determination
GOST 22974.3-1985 Melted welding fluxes. Methods of manganous oxide (II) determination
GOST 22974.4-1985 Melted welding fluxes. Method of aluminium oxide determination
GOST 22974.6-1985 Melted welding fluxes. Methods of iron oxide (III) determination
GOST 22974.8-1985 Melted welding fluxes. Methods of zirconium oxide determination
GOST 22974.9-1985 Meltsed welding fluxes. Method of titanium oxide (IV) determination
GOST 22974.11-1985 Melted welding fluxes. Methods of calcium fluoride determination
GOST R 50541-1993 Miniature fuses. Guide lines for quality assessment of miniature fuse-links
GOST 22974.10-1996 Melted welding fluxes. Methods of sodium and potassium oxides determination
GOST 22974.10-1985 Melted welding fluxes. Methods of sodium and potassium oxides determination
GOST 22974.5-1996 Melted welding fluxes. Methods of calcium and magnesium oxides determination
GOST 23581.14-1979 Iron ores, concentrates, agglomerates and pellets. Method of determination of insoluble residue
GOST 23338-1991 Welding of metals. Methods for determination of diffusible hydrogen in deposited weld metal and fused metal
GOST 27728-1988 Industrial frequency induction furnaces for aluminium melting. Norms of energy consumption
GOST 22974.5-1985 Melted welding fluxes. Methods of calcium and magnesium oxide determination
GOST R 55143-2012 Quality requirements for fusion welding of metallic materials. Part 6. Guidelines on implementing ISO 3834
GOST 25997-1983 Fusion welding of metals. Statistical quality evaluation by nondestructive testing results
GOST 5.1929-1973 Welding melted fluxes grades AN-20S and AN-20P. Requirements for quality of certified of production
GOST R ISO 15792-3-2010 Welding consumables. Test methods. Part 3. Classification testing of positional capacity and root penetration of welding consumables in a fillet weld

IL-SII, how to melt

S.I.230-1969 SCREWED ELECTRIC FUSES WITH FUSE LINK : QUALITY REQUIREMENTS

Japanese Industrial Standards Committee (JISC), how to melt

JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
JIS Z 3400:2013 Quality requirements for fusion welding of metallic materials
JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal
JIS Z 3400:1999 Quality requirements for welding -- Fusion welding of metallic materials
JIS K 7210:1995 Testing method for melt flow rate of thermoplastics
JIS K 6233-3:1998 Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method
JIS M 8082:1976 Method of sampling and methods of determination of copper content and moisture of copper scraps for smelting
JIS K 6233-2:1998 Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
JIS M 8082:1999 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content

HU-MSZT, how to melt

British Standards Institution (BSI), how to melt

BS EN 60127-5:1991 Miniature fuses - Guide for the quality assessment of miniature fuse-links
BS EN 60127-5:2017 Miniature fuses. Guidelines for quality assessment of miniature fuse-links
BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Elementary quality requirements
BS EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Standard quality requirements
BS EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements
BS EN ISO 3834-3:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Standard quality requirements
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 3834-4:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Elementary quality requirements
BS EN ISO 3834-2:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
BS ISO 13765-6:2006 Refractory mortars - Determination of the moisture content of ready-mixed mortars
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the enthalpy of fusion of crystallites
BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
PD CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834
BS EN 61189-11:2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Measurement of melting temperature or melting temperature ranges of solder alloys
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
BS EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Criteria for the selection of the appropriate level of quality requirements
BS EN ISO 10720:1997 Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas
BS EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas
BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS EN ISO 3834-1:2021 Tracked Changes. Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements
BS EN 348:1992 Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS EN 60512-12-1:2006 Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12a - Solderability, wetting, solder bath method

PL-PKN, how to melt

PN E06170-05-1993 Miniature fuses. Guidelines for quality assessment of miniature fuse-links
PN M48038 ArkusZ01-1974 Meaters and mel?ing ?anks ?or bituminous inders lasi?ication
PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PN-EN ISO 3834-2-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
PN-EN ISO 3834-4-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements (ISO 3834-4:2021)
PN-EN ISO 3834-3-2021-09 E Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality requirements (ISO 3834-3:2021)

German Institute for Standardization, how to melt

DIN 41568-2:1963 Gauges for miniature fuses; depth gauge for fuse bases E16 250 V
DIN VDE 0820-5:1992 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links (IEC 60127-5:1988); german version EN 60127-5:1991
DIN 49518:1979 Gauges C17, for concentricity of fuse-bases
DIN 43620-6:1987 Low-voltage high-rupturing-capacity fuses with blade contacts; bus-mounting fuse-bases, LV HRC bus-mounting fuse-disconnectors and LV HRC bus-mounting fuse-switches up to AC 660 V
DIN 4051:2002 Sewer clinkers - Requirements, testing, quality control
DIN EN ISO 3834-2:2021-08 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021); German version EN ISO 3834-2:2021
DIN EN ISO 3834-3:2021-08 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021); German version EN ISO 3834-3:2021
DIN EN ISO 3834-4:2021-08 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021); German version EN ISO 3834-4:2021
DIN 10294:1963 Butter melting beaker for the determination of water content in butter
DIN 43653:1976 High rupturing-capacity fuses for semi-conductor converters
DIN ISO 14869-2:2003-01 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion (ISO 14869-2:2002)
DIN 43620-1:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN 43620-3:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse bases for LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN 41568-1:1963 Gauges for miniature fuses E16 250 V; synopsis
DIN 58145:2017-01 Measuring method for determination of solarisation effect of fused silica optical fibers; Text in German and English
DIN V 32538:2000 Welding - Implementation of EN 729 on quality requirements for fusion welding of metallic materials (CR 13576:1999)
DIN 40401-1:1981 Gauges for edinson thread for d-type fuses "go" ring gauges
DIN 40401-1:1981-12 Gauges for edinson thread for d-type fuses "go" ring gauges
DIN 40401-2:1981 "Go" and "not go" plug gauges for d-type fuses; gauges for edison thread
DIN EN 61074:1994 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
DIN ISO 14869-2:2003 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion (ISO 14869-2:2002)
DIN EN ISO 3834-6:2022-10 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/DIS 3834-6:2022); German and English version prEN ISO 3834-6:2022 / Note: Date of issue 2022-09-23*Intended as replacement for DIN-Fachberi...
DIN EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997); English version of DIN EN ISO 10720:2007-06
DIN EN ISO 10720:2007-06 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997); German version EN ISO 10720:2007

Taiwan Provincial Standard of the People's Republic of China, how to melt

CNS 12034-2003 Fritted trace-elements (FTE) fertilizer
CNS 7514-1981 Method for Determination Tungsten in Ores (Melting Method)
CNS 14982-5-2007 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

RO-ASRO, how to melt

STAS 9398-1983 FUSION WELDED STEEL JOINTS Quality classes
STAS 12388-1986 SILICO-ALUMINOUS REFRACTARY MASSES Rules and methods for quality checking up
STAS 8935-1990 CURRENT-LIMITING HIGH VOLTAGE FUSES General technical requirements for quality
STAS 452/1-1973 TYPE D-SCREW FUSES General technical requirements for quality
STAS 11958-1984 LOW-MELTING ALLOYS Grades and technical requirements for quality
STAS 9477/1-1979 MELTED FLUXES FOR STEEL WELDING Marks and technical quality conditions
STAS 9728/1-1987 Aircraft PRECISION FUSE-LINKS General technical requirements for quality
STAS 8055/1-1980 CARTRIDGE FUSE-LINKS FOR MINIATURE FUSES General technical requirements for quality
STAS 2572-1976 BLOWN SODA-LIME GLASS HOUSEHOLD GOODS General technical reqiiirements for quality
STAS 9258-1979 TRIPLE-POLE CHARGE CONNECTORS WITH HIGHBREAKING CAPACITY FUSES Technical requirements for quality
STAS 10769-1987 ELECTRICAL INDUSTRIAL BATCH FURNACES WITH HEATING RESISTORS Rules and test methods
STAS 10906-1981 SILICO-ALUMINOUS REFRACTORY PRODUCTS FOR COKE OVENS Technical requirements for quality
STAS 6855-1986 REFRACTORY ALLOY AND ANTICORROSIVE STEEL CAST IN GS Grades and general tcchnical requirements for qualily

Korean Agency for Technology and Standards (KATS), how to melt

KS C IEC 60127-5:2003 Miniature fuses－Part 5：Guidelines for quality assessment of miniature fuse-links
KS C IEC 60127-5:2020 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links
KS M 3041-2006(2011) Test method for melting point of semicrystalline polymers
KS M 1071-1-2007 Guide for determination of melting/freezing point for chemical substances
KS L 3418-2015(2020) Test method for determination of lead and cadmium content(Alkaline fusion)
KS B ISO 3834-2-2016(2021) Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3-2016(2021) Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4-2016(2021) Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS L 3419-2015 Test method for determination of lead and cadmium content(pressure vessel)
KS L 3419-2005 Determination of lead and cadmium content in alumina raw powders(high pressure bomb digestion method)
KS I ISO 14869-2:2019 Soil quality — Dissolution for the determination of total element content ― Part 2: Dissolution by alkaline fusion
KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS B ISO 13579-4-2016(2021) Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive atmosphere
KS M ISO 1133-1-2012(2022) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M 0169-2010 Determination of the hexavalent chromium in polymers by UV-Visible spectrophotometry(organic solvent dissolution method)
KS I ISO 14869-2:2009 Soil quality－Dissolution for the determination of total element content－Part 2：Dissolution by alkaline fusion
KS B ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials-Part 2:Comprehensive quality requirements
KS B ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials-Part 3:Standard quality requirements
KS B ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials-Part 4:Elementary quality requirements
KS B ISO 3834-2:2016 Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3:2016 Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4:2016 Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS H ISO 1735-2006(2016) Cheese and processed cheese products－Determination of fat content－Gravimetric method(Reference method)
KS M ISO 6528-2:2006 Rubber-Determination of total sulfur content-Part 2:Sodium peroxide fusion method
KS D ISO 10720-2003(2018) Steel and iron－Determination of nitrogen content－Thermal conductimetric method after fusion in a current of inert gas
KS M ISO 6528-2:2016 Rubber－Determination of total sulfur content－Part 2：Sodium peroxide fusion method
KS C IEC 61074-2002(2012) Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS M ISO 6528-2-2006(2011) Rubber－Determination of total sulfur content－Part 2：Sodium peroxide fusion method
KS D ISO 22963-2010(2020) Titanium and titanium alloys－Determination of oxygen－Infrared method after fusion under inert gas
KS D ISO 4503-2003(2018) Hardmetals－Determination of contents of metallic elements by X-ray fluorescence－Fusion method
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS B ISO 3834-1-2016(2021) Quality requirements for fusion welding of metallic materials－Part 1：Criteria for the selection of the appropriate level of quality requirements
KS D ISO 4503:2003 Hardmetals-Determination of contents of metallic elements by X-ray fluorescence-Fusion method
KS B 0524-1994 Methods of measurement for ferrite content in austenitic stainless steel deposited metal
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS D ISO 10720:2003 Steel and iron-Determination of nitrogen content-Thermal conductimetric method after fusion in a current of inert gas
KS D ISO 15351-2003(2018) Steel and iron－Determination of nitrogen content－Thermal conductimetric method after fusion in a current of inert gas(Routine method)
KS D ISO 10700-2008(2018) Steel and iron－Determination of manganese content－Flame atomic absorption spectrometric method
KS H ISO 5943-2006(2016) Cheese and processed cheese products－Determination of chloride content－Potentiometric titration method

Group Standards of the People's Republic of China, how to melt

T/NJ 1348-2023 Quality requirements for laser cladding iron-based self-fluxing alloy coating on rotary tiller
T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
T/GAMA 24-2022 Additive manufacturing Measurement of melt pool characteristics Single-camera colorimetry
T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
T/CSTM 00269-2020 Computed tomography in dimensional measurement Of selective laser melting manufactured structures
T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）
T/GAMA 01-2020 Laser selective melting metal additive manufacturing equipment and quality control
T/NXCL 023-2023 Determination of hydrogen and nitrogen in Beryllium— Inert gas fusion infrared absorption/ thermal conductivity method
T/CSIQ 72003-2020 Rigid PVC pipes—Measurement of enthalpy of fusion of crystallites—Differential scanning calorimetry (DSC) method

Professional Standard - Medicine, how to melt

YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, how to melt

GJB 905-1990 Quality control for investment casting process.

Professional Standard - Aviation, how to melt

HB 5133-1979 30ＣｒＭNＳｉNｉ2A steel fusion welded joint quality inspection
HB 5375-1987 Aluminum and aluminum alloy fusion welding quality inspection
HB/Z 119-2011 Fusion weld process and quality inspection for aluminium and aluminium alloys
HB 5350.2-1986 Method for determination of thermal deformation of investment casting mold material
HB 5135-2000 Structural steel and stainless steel fusion welded joint quality inspection
HB 5351.3-1986 Method for determination of specific gravity of investment casting coatings (volumetric method)
HB 5135-1979 Quality Inspection of Structural Steel and Stainless Steel Welded Joints (Trial)

Defense Logistics Agency, how to melt

DLA QPL-W-F-1814-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA W-F-1814 D-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA W-F-1814 D SUPP 1-2013 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA QPL-W-F-1814-30-2005 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY
DLA QPL-W-F-1814-QPD-2010 Fuse, Cartridge, High-Interrupting Capacity
DLA QPL-W-F-1814-2011 FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY

未注明发布机构, how to melt

GJB 905A-2019 Investment casting process quality control
DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
BS EN 729-2:1995(1998) Quality requirements for welding — Fusion welding of metallic materials — Part 2 : Comprehensive quality requirements
BS EN 729-3:1995(1998) Quality requirements for welding Fusion welding of metallic materials — Part 3 : Standard quality requirements
BS EN 729-4:1995(1998) Quality requirements for welding — Fusion welding of metallic materials — Part 4 : Elementary quality requirements
BS PD CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials — Part 6 : Guidelines on implementing ISO 3834
BS ISO 18373-2:2008(2011) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2 : Measurement of the enthalpy of fusion of crystallites

Professional Standard - Textile, how to melt

FZ/T 01081-2000 Determination of coating weight and uniform for fusible interlinings
FZ/T 01081-2009 Testing method for coating weight and uniform for fusible interlinings
FZ/T 01081-2018 Test method for hot melt adhesive coating amount of fusible interlining
FZ/T 01074-2000 Regulations on labeling and quality identifying of fusible interlinings for garments

European Committee for Electrotechnical Standardization（CENELEC）, how to melt

EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
HD 109.5 S1-1989 Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links
EN 61074:1993 Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991)

Association Francaise de Normalisation, how to melt

NF C60-434:1991 Miniature fuses. Part 5 : guidelines for quality assessment of miniature fuse-links.
NF C60-434*NF EN 60127-5:2017 Miniature fuses - Part 5 : guidelines for quality assessment of miniature fuse-links
NF A88-110-1:2011 Qualification test of welders - Fusion welding - Part 1 : steels.
NF EN ISO 3834-4:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 4 : exigences de qualité élémentaire
NF EN ISO 3834-3:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 3 : exigences de qualité normale
NF EN ISO 3834-2:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 2 : exigences de qualité complète
NF A89-250-3:2006 Quality requirements for fusion welding of metallic materials - Part 3 : standard quality requirements.
NF A89-250-3*NF EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3 : standard quality requirements
NF ISO 14869-2:2002 Qualité du sol - Mise en solution pour la détermination des teneurs élémentaires totales - Partie 2 : mise en solution par fusion alcaline
NF T30-230:1985 Paints and varnishes. Determination of chlorine content. Oxydative alkaline fusion method.
NF A06-913:1956 Chemical analysis of tin. Volumetric determination of tin in remelted tin.
NF A89-250-4:2006 Quality requirements for fusion welding of metallic materials - Part 4 : elementary quality requirements.
NF A89-250-2:2006 Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements.
NF A89-250-4*NF EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4 : elementary quality requirements
NF A89-250-2*NF EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements
NF A89-250-2:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.
NF A89-250-4:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.
NF A89-250-3:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.
FD CEN ISO/TR 3834-6:2009 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 6 : lignes directrices pour la mise en application de l'ISO 3834
NF EN ISO 3834-1:2021 Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 1 : critères pour la sélection du niveau approprié d'exigences de qualité
NF A06-559*NF EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
NF EN ISO 3690:2018 Soudage et techniques connexes - Détermination de la teneur en hydrogène dans le métal fondu pour le soudage à l'arc
NF A89-250-1*NF EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials - Part 1 : criteria for the selection of the appropriate level of quality requirements
NF A89-250-1:2006 Quality requirements for fusion welding of metallic materials - Part 1 : criteria for the selection of the appropriate level of quality requirements.
NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF A95-490*NF EN 24883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method.
FD A89-250-6*FD CEN ISO/TR 3834-6:2009 Quality requirements for fusion welding of metallic materials - Part 6 : guidelines on implementing ISO 3834

KR-KS, how to melt

KS C IEC 60127-5-2020 Miniature fuses — Part 5: Guidelines for quality assessment of miniature fuse-links
KS B ISO 3834-2-2016 Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3-2016 Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4-2016 Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS I ISO 14869-2-2019 Soil quality — Dissolution for the determination of total element content ― Part 2: Dissolution by alkaline fusion
KS B ISO 3834-1-2016 Quality requirements for fusion welding of metallic materials－Part 1：Criteria for the selection of the appropriate level of quality requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, how to melt

GB/T 9364.5-2011 Miniature fuses.Part 5: Guidelines for quality assessment of miniature fuse-links
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 15927-1995 Method for chemical analysis of arsenic ores--Determination of arsenic content--Iodimetric method after pre-separation by fusion
GB/T 1820-1979 Determination of tin content in tin concentrates--Beryllium as carrier-fusion with sodium peroxide iodate titrimetric method
GB/T 12467.2-2009 Quality requirements for fusion welding of metallic materials.Part 2:Comprehensive quality requirements
GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials.Part 3:Standard quality requirements
GB/T 12467.4-2009 Quality requirements for fusion welding of metallic materials.Part 4:Elementary quality requirements
GB/T 6416-1986 Technical factors influencing the quality of the fusion welded joints in steel
GB/T 30794-2014 Determination of polyvinylidene fluoride (PVDF) content of hot-melt fluorocarbon resin coatings (dry film).Dropping of the melting temperature
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 223.82-2007 Steel and iron-Determination of hydrogen content-Inert gas impulse fusion heat conductivity method
GB/T 13250-1991 Vulcanized rubber--Determination of total sulfur content--Sodium peroxide fusion method
GB/T 12467.2-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 2: Comprehensive quality requirements
GB/T 12467.3-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 3: Standards quality requirements
GB/T 12467.4-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 4: Elementary quality requirements
GB/T 4699.2-1984 Methods for chemical analysis of silicochromium--The alkaline fusion-ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 24583.2-2009 Vanadium-Nitrogen alloy.Determination of nitrogen content.Thermal conductimetric method after fusion in a current of inert gas
GB/T 28724-2012 Determination of melting temperature for chemicals(pharmaceuticals).Differential scanning calorimetry(DSC)
GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
GB/T 8639.7-1988 Vanadium--Determination of oxygen content--Impulse fusion-gas chromatographic method
GB/T 10788-1989 Determination of soluble solids content in canned food--Refractometric method
GB/T 4324.25-1984 Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content
GB/T 12469-1990 Quality assurance of welding--Requirement for fusion welding joint of steel and classification for imperfection
GB/T 4497.2-2013 Rubber.Determination of total sulfur content.Part 2:Sodium peroxide fusion method
GB/T 26050-2010 Hardmetals.Determination of contents of metallic elements by X-ray fluorescence.Fusion method
GB/T 4325.25-1984 Methods for chemical analysis of molybdenum--The inert gas fusion-coulometric titration method for the determination of oxygen content
GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials.Part 1:Criteria for the selection of the appropriate level of quality requirements
GB/T 20124-2006 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
GB/T 12467.5-2009 Quality requirements for fusion welding of metallic materials.Part 5:Standard documents need to conform to claim conformity to the quality requirements
GB/T 11261-2006 Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
GB/T 13747.22-1992 Zirconium and zirconium alloys--Determination of oxygen content--Inert gas fusion coulometric method
GB/T 12605-1990 Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes

ES-UNE, how to melt

UNE-EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN ISO 3834-2:2022 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
UNE-EN ISO 3834-3:2022 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
UNE-EN ISO 3834-4:2022 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
ISO/FDIS 3834-6:2023 Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
UNE-EN ISO 3834-1:2022 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
UNE-EN 61074:1993 DETERMINATION OF HEATS AND TEMPERATURES OF MELTING AND CRYSTALLIZATION OF ELECTRICAL INSULATING MATERIALS BY DIFFERENTIAL SCANNING CALORIMETRY. (Endorsed by AENOR in November of 1995.)

BE-NBN, how to melt

NBN C 61-127-5-1992 Miniature fuses Part 5 : Guidelines for quality assessment of miniature fuse-links
NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics
NBN T 04-212-1983 Phthalic anhydride for industrial use - Measurement of colour of the molten material
NBN EN 729-2-1994 Quality requirements for welding - Fusion welding of metallic materials - Part 2 : Comprehensive quality requirements
NBN EN 729-3-1994 Quality requirements for welding - Fusion welding of metallic materials - Part 3 : Standard quality requirements

International Electrotechnical Commission (IEC), how to melt

IEC 60127-5:1988 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links
IEC 60127-5:2016 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry

International Organization for Standardization (ISO), how to melt

ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements
ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 1133-1:2022 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion
ISO 3834-2:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-3:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standards quality requirements
ISO 3834-4:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements
ISO 6528-2:1992 Rubber; determination of total sulfur content; part 2: sodium peroxide fusion method
ISO 6528-2:1983 Rubber — Determination of total sulfur content — Part 2: Sodium peroxide fusion method
ISO 13765-6:2004 Refractory mortars - Part 6: Determination of moisture content of ready-mixed mortars
ISO 15351:1999 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
ISO/PRF 3262-22 Extenders — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
ISO 19959:2020 Steels, nickel alloys and cobalt alloys investment castings — Visual testing of surface quality
ISO 3262-22:2023 Extenders — Specifications and methods of test — Part 22: Flux-calcined kieselguhr
ISO 4440-1:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method
ISO 4440-2:1994 Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions
ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites
ISO 4503:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method
ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

Danish Standards Foundation, how to melt

DS/EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
DS/EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
DS/EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
DS/EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
DS/ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements
DS/ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials – Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
DS/EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements (ISO 3834-4:2021)
DS/EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements (ISO 3834-3:2021)
DS/ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements
DS/ISO 6528/2:1984 Rubber. Determination of total sulfur content. Part 2: Sodium peroxide fusion method
DS/CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834
DS/EN ISO 3834-1:2006 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
DS/EN 24503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/ISO 4503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
DS/EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)

CL-INN, how to melt

Standard Association of Australia （SAA）, how to melt

AS/NZS ISO 3834.4:2008
AS/NZS ISO 3834.3:2008
AS/NZS ISO 3834.2:2008
AS/NZS ISO 3834.2:1999 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS/NZS ISO 3834.4:1999 Quality requirements for welding - Fusion welding of metallic materials - Elementary quality requirements
AS/NZS ISO 3834.3:1999 Quality requirements for welding - Fusion welding of metallic materials - Standards quality requirements
AS/NZS ISO 3834.2:2023 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS/NZS ISO 3834.3:2023 Quality requirements for fusion welding of metallic materials, Part 3: Standard quality requirements
AS/NZS ISO 3834.4:2023 Quality requirements for fusion welding of metallic materials, Part 4: Elementary quality requirements
AS/NZS ISO 3834.1:2008
AS 2879.11:2004 Alumina - Guide to reporting Al₂O₃ content of smelter-grade alumina
AS/NZS ISO 3834.1:1999 Quality requirements for welding - Fusion welding of metallic materials - Guidelines for selection and use
AS/NZS ISO 3834.1:2023 Quality requirements for fusion welding of metallic materials, Part 1: Criteria for the selection of the appropriate level of quality requirements

American National Standards Institute （ANSI), how to melt

ANSI/AWS A4.4M:2001 Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
ANSI/GRHC/SPRI VR-1-2011 Procedure for Investigating Resistance to Root Penetration on Vegetative Roof Systems
ANSI/ASTM E2749:2010 Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ANSI/AWS A4.5M/A4.5:2012 Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld

ZA-SANS, how to melt

SANS 1133:2008 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
SANS 10167:2004 The quality evaluation of fusion welded joints in steel structures
SANS 3834-2:2006 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
SANS 3834-3:2006 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
SANS 3834-4:2006 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements
SANS 3834-1:2006 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements

CU-NC, how to melt

NC 44-05-1985 Ores. Sinterized Nickel Oxide. Quality Specifications
NC 54-336-1985 Construction Materials and Prodvicts. Refractory Mortars. Quality Specifications
NC 33-48-1986 Oil and Oil Derivatives Soluble Oil. Quality Specifications
NC 44-03-5-1986 Ores Sinterized Nickel Oxide Gravimetric Method for Carbon Determination
NC 54-303-1985 Construction Materials and Products. Fire-Clay and SemiAcid Refractories for Common Purposes. Quality Speoifications

全国标准信息公共服务平台, how to melt

GB/T 42401-2023 Laser cladding repair defect quality classification

American Society for Testing and Materials (ASTM), how to melt

ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F1893-98(2003) Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
ASTM F1893-98 Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices
ASTM F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
ASTM D8377-21 Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E2749-15 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E2749-15a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E2749-23 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM C1026-13 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile

European Committee for Standardization (CEN), how to melt

EN 60127-5:1991 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links (IEC 127-5:1988)
EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
EN 729-2:1994 Quality Requirements for Welding - Fusion Welding of Metallic Materials - Part 2: Comprehensive Quality Requirements
EN 729-3:1994 Quality Requirements for Welding - Fusion Welding of Metallic Materials - Part 3: Standard Quality Requirements
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
prEN 729-2-1992 Quality systems for welding; fusion welding of metallic materials; part 2: complete quality system
prEN 729-3-1992 Quality systems for welding; fusion welding of metallic materials; part 3: standard quality system
prEN 729-4-1992 Quality systems for welding; fusion welding of metallic materials; part 4: elementary quality system
EN 729-4:1994 Quality Requirements for Welding - Fusion Welding of Metallic Materials - Part 4: Elementary Requirements
EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)
CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834
EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas
EN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834

Lithuanian Standards Office , how to melt

LST EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
LST EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
LST EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
LST EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
LST EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
LST EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
LST EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

AENOR, how to melt

UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
UNE-EN ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005)
UNE-EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
UNE-EN ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
UNE-EN 60127-5:1994 MINIATURE FUSES. PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS.

American Welding Society (AWS), how to melt

AWS A4.4M-2001 Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
AWS PRGQA-2001 The Practical Reference Guide for Welding Aluminum High-Quality Fusion Welding
WRC 226:1977 A Review of Minor Element Effects on the Welding Arc and Weld Penetration

SAE - SAE International, how to melt

SAE AS5466-2012 Aerospace - General Requirements for Hydraulic Fuse - Quantity Measuring

YU-JUS, how to melt

JUS N.E5.744-1991 Miniature fuses. Cartridge fuse links 5 mm x 20 mm. Time-lag (surge-proof). High-breaklng capacity
JUS ISO 4503:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method

CH-SNV, how to melt

VSM 12252-1926
VSM 10307.2-1920
VSM 77204.7-1974
VSM 18670.6-1964 Textiles — Tests for colour fastness Section E10: Colour fastness to decatizing
VSM 18654-1965
SN ISO 4032:1981 Hexagon nuts, style 1 — Product grades A and B

Association of German Mechanical Engineers, how to melt

DVS 0712-1994
DVS 0907-3-1984 Determination of the burn-out pickup and the burn-out of submerged-arc welding flux; the flux diagram
DVS 0907-4-1984 Determination of the burn-out pickup and burn-out of submerged-arc welding flux; application of the flux diagram

AT-ON, how to melt

ONORM E 6701-1988 Fuse-gauge pieces; D Ol, D 02, D 03 and handkey for gauge piece
OENORM EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
OENORM EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
OENORM EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
ONORM E 6021-1989 Low-voltage high-rupturing-capacity fuses up to 660 V; LV HRC fuse bases

Professional Standard - Machinery, how to melt

JB/T 7948.11-1999 Methods for chemical analysis of melted welding fluxes.The direct combustion-iodimetric method for determination of sulfur content
JB/T 7948.11-1995 Methods for chemical analysis of melted welding fluxes.The direct combustion-iodimetric method for determination of sulfur content
JB/T 7948.1-1999 Methods for chemical analysis of melted welding fluxes.The gravimetric method for determination of silicon dioxide content
JB/T 7948.4-1999 Methods for chemical analysis of melted welding fluxes.The EDTA volumetric method for determination of aluminium oxide content
JB/T 7948.1-1995 Methods for chemical analysis of melted welding fluxes.The gravimetric method for determination of silicon dioxide content
JB/T 8392-1996 Xerographic dry toners melt index measurement
JB/T 7948.12-1999 Methods for chemical analysis of melted welding fluxes.The EDTA volumatric method for determination of calcium oxide and magnesium oxide content
JB/T 7948.12-1995 Methods for chemical analysis of melted welding fluxes.The EDTA volumatric method for determination of calcium oxide and magnesium oxide content
JB/T 7948.7-1999 Methods for chemical analysis of melted welding fluxes.The lead chlorofluoride-EDTA volumetric method for determination of calcium fluoride content
JB/T 7948.10-1999 Methods for chemical analysis of melted welding fluxes.The direct combustion-coulomb method for determination of total carbon content
JB/T 7948.6-1999 Methods for chemical analysis of melted welding fluxes.The pyrolytic method for determination of calcium fluoride content
JB/T 7948.8-1999 Methods for chemical analysis of melted welding fluxes.The "molybdenum blue"photometric method for determination of phosphorus content
JB/T 7948.10-1995 Methods for chemical analysis of melted welding fluxes.The direct combustion-coulomb method for determination of total carbon content
JB/T 7948.8-1995 Methods for chemical analysis of melted welding fluxes.The "molybdenum blue"photometric method for determination of phosphorus content
JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
JB/T 7948.2-1999 Methods for chemical analysis of melted welding fluxes.The potentiometric method for determination of manganese oxide content

Professional Standard - Commodity Inspection, how to melt

SN/T 2427-2010 Determination of melting temperature and melting temperature range of chemicals for import and export by differential scanning calorimetry

VN-TCVN, how to melt

TCVN 7506-2-2011 Quality requirements for fusion welding of metallic materials.Part 2: Comprehensive quality requirements
TCVN 7506-3-2011 Quality requirements for fusion welding of metallic materials.Part 3: Standard quality requirements
TCVN 7506-4-2011 Quality requirements for fusion welding of metallic materials.Part 4: Elementary quality requirements
TCVN 7506-1-2011 Quality requirements for fusion welding of metallic materials.Part 1: Criteria for the selection of the appropriate level of quality requirements

IT-UNI, how to melt

UNI EN ISO 3834-3:2021 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
UNI EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
UNI EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
UNI 6823-1971

Military Standard of the People's Republic of China-General Armament Department, how to melt

GJB/J 3050-1997 Calibration procedures for melting point measuring devices for explosives using the capillary method
GJB/J 3050-1997(XG1-2015) Modification of the calibration procedures for capillary method explosive melting point measuring devices 1-2015

工业和信息化部, how to melt

SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)
YB/T 4565-2016 Determination of titanium iron nitrogen content by inert gas melting thermal conductivity method
YB/T 4529-2016 Determination of nitrogen content in manganese iron nitride by inert gas melting thermal conductivity method
YB/T 4566.1-2016 Determination of nitrogen content in vanadium iron nitride by inert gas melting thermal conductivity method
YB/T 4738-2019 Determination of oxygen content of calcium silicon alloy by inert gas fusion infrared absorption method
YS/T 1257-2018 Differential scanning calorimetry for melting and crystallization enthalpy tests of non-ferrous metal materials

Professional Standard - Ferrous Metallurgy, how to melt

YB/T 163-1999 Expendable thermocouples for the molten metal temperature fast measurement
YB/T 4306-2012 Steel,iron and alloy.Determination of nitrogen content.Thermal conductimetric method after fusion in a current of inert gas
YB/T 4305-2012 Steel, iron and alloy.Determination of oxygen content.Infrared method after fusion under inert gas

Society of Automotive Engineers (SAE), how to melt

SAE AMS6493A-2013 Steel Bars, Forgings, and Tubing, 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C), Electroslag Remelted or Consumable Electrode Vacuum Remelted, Premium Aircraft-Quality
SAE AMS6495A-2011 Steel Bars, Forgings, and Tubing 1.0Cr 2.50Ni 2.0Mo 1.10Si (0.10 - 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted
SAE AMS6495C-2022 Steel Bars, Forgings, Mechanical Tubing, and Forging Stock 1.0Cr - 2.50Ni - 2.0Mo - 1.10Si (0.10 - 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted

NL-NEN, how to melt

NEN 3513-1986 Refractory products Determination of pyrometric cone equivalent (refractoriness)

Qinghai Provincial Standard of the People's Republic of China, how to melt

DB63/T 1634-2018 Determination of Potassium Chloride Content in Molten Salt Electrolyte - Tetraphenylborate Sodium Quaternary Ammonium Salt Volumetric Method

国家市场监督管理总局、中国国家标准化管理委员会, how to melt

GB/T 24583.2-2019 Vanadium-nitrogen—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas
GB/T 38976-2020 Test method for the oxygen concentration in silicon materials—Inert gas fusion infrared detection method
GB/T 40275-2021 Textiles—Quantitative analysis of bicomponent fiber—Melting microscopy method

IN-BIS, how to melt

Professional Standard - Non-ferrous Metal, how to melt

YS/T 368-2015 Test method of thermo-emf for noble metal thermocouple wires.Fuse wire
YS/T 540.7-2006 Vanadium Chemical Analysis Method Pulse Melting-Gas Chromatography Determination of Oxygen Content

Professional Standard - Electricity, how to melt

DL/T 542-2014 Methods of ultrasonic testing and assessment of measuring results for T-Joints fillet fusion welded in steel
DL/T 821-2017 Radiographic Inspection Technology and Quality Grading of Metal Fusion Welded Butt Joints
DL/T 542-1994 Methods of Ultrasonic Testing and Classification of Measuring Results for T-Joints Fillet Fusion Welded in Steel

GM North America, how to melt

GM GM9094P-1988 Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, how to melt

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

Jilin Provincial Standard of the People's Republic of China, how to melt

DB22/T 2910-2018 Determination of fluorine content in imported coal by alkali fusion-fluorine ion selective electrode method

Beijing Provincial Standard of the People's Republic of China, how to melt

DB11/T 2140-2023