ZH
RU
ES

a-cleavage

a-cleavage, Total:237 items.

In the international standard classification, a-cleavage involves: Organic chemicals, Raw materials for rubber and plastics, Products of the chemical industry, Cutting tools, Wastes, Analytical chemistry, CHEMICAL TECHNOLOGY, Biology. Botany. Zoology, Equipment for the chemical industry, Environmental protection, Protection against crime, Rubber, Farming and forestry, Aircraft and space vehicles in general, Electrical accessories, Construction materials, Waxes, bituminous materials and other petroleum products, Equipment for the rubber and plastics industries, Materials for the reinforcement of composites, Edible oils and fats. Oilseeds, Production in the chemical industry, Products of the textile industry, Protection against fire, Industrial furnaces, Water quality, Capacitors, Software development and system documentation, Protection of and in buildings, Medical equipment, Fuels, Road vehicle systems, Textile fibres, Surface treatment and coating, Non-ferrous metals, Electronic component assemblies, Plastics, Paints and varnishes, Refractories, Ceramics, Materials for aerospace construction, Vocabularies, Air quality, Physics. Chemistry, Laboratory medicine.

Professional Standard - Petrochemical Industry, a-cleavage

SH/T 1794-2015 Cracking naphthalene fraction
SH/T 1789-2015 Cracking C<下标5> fraction for industrial use
SH/T 1792-2015 Cracking C<下标9> for industrial use
SH/T 1142-2009 Cracking C fraction for industrial use-Sampling in the liquid phase
SH/T 1142-1992 Liquid Sampling Method of Industrial Cracking C4
SH/T 3511-2000 Technical code for construction of cracking heater of ethylene plant
SH/T 0778-2005 Determination of paraffin wax content of asphalts by cracking and deoiling method
SH/T 1793-2015 Cracking C<下标9> for industrial use.Determination of components.Gas chromatographic method
SH/T 1141-1992 Determination of the composition of cracked C4 for industrial use (gas chromatography)
SH/T 1141-2015 Cracking C<下标4> fraction for industrial use.Determination of hydrocarbon composition.Gas chromatographic method
SH/T 1144-1992 Determination of trace water in cracked carbon four for industrial use (Karl Fischer method)
SH/T 1790-2015 Cracking C<下标5> fraction for industrial use.Determination of hydrocarbon components.Gas chromatographic method
SH/T 1145-1992 Determination of α-alkyne content in cracked C4 for industrial use (silver nitrate method)
SH/T 3511-2007 Technical specification for construction of ethylene cracking heater and hydrogen product reformer in petrochemical industry
SH/T 3511-2020 Specifications for construction and acceptance of petrochemical ethylene cracking furnace and hydrogen conversion furnace
SH/T 1143-1992 Determination of density or relative density of pyrolysis carbon dioxide for industrial use (pressure float method)
SH/T 1764.1-2008 Rubber.Analysis by pyrolytic gas-chromatographic methods.Part 1:Identification of polymers(single polymers and polymer blends)

Group Standards of the People's Republic of China, a-cleavage

T/GPCIA 0004-2022 Ethylene cracking―mixed C8
T/CACE 021-2020 Modified pyrolysis carbon black for use in rubber products
T/CIET 145-2023 Technical specifications for thermal cracking of waste plastics
T/CSTM 00528-2022 Second stage hydrorefining catalyst for pyrolysis gasoline
T/GIEHA 043-2022 Organic solid waste steam cracking carbonization treatment equipment
T/CTRA 03-2020 Waste tire/rubber pyrolysis carbon black deep processing device
T/CSTM 00527-2022 Pd-based catalyst of first stage selective hydrogenation for pyrolysis gasoline
T/CSTM 00318-2020 Ni-based catalyst of first stage selective hydrogenation for pyrolysis gasoline
T/CRRA 9902-2020 Technical specification for pyrolysis regeneration of waste carbon fiber composites
T/CI 021-2021 Design criteria for continuous rotary kiln waste tyre pyrolysis reactor
T/CNTAC 153-2023 Textiles—Screening method of quinoline—Pyrolysis-gas chromatography-mass spectrometry method
T/QAS 060-2021 Determination of Mercury in Brine Pyrolysis Atomic Absorption Spectrophotometry
T/CBPIA 0003-2022 Determination of the activity of chondroitin sulfate lyase by spectrophotometry
T/CNTAC 154-2023 Textiles—Screening method of permethrin—Pyrolysis-gas chromatography-mass spectrometry method
T/SDHCIA 002-2020 Catalytic cracking method of coking ammonia distillation wastewater treatment engineering technical specification
T/SDSES 004-2022 Engineering technical specifications for the resource utilization of radiant thermal cracking of oily sludge
T/CSATC 9-2022 Test method for identification of weight-added silk floss-Py-GC-MS method
T/CTRA 02-2022 Carbon emission accounting and reporting requirements for waste tire/rubber pyrolysis enterprises
T/CNTAC 151-2023 Textiles—Screening method of benzotriazoles—Pyrolysis-gas chromatography-mass spectrometry method
T/CNTAC 152-2023 Textiles—Screening method of methylsiloxanes—Pyrolysis-gas chromatography-mass spectrometry method
T/CSTM 00254-2020 The pyrolysis products of polycarbosilane–Determination of oxygen by the pulse heating insert gas fusion-infra-red absorption method

工业和信息化部, a-cleavage

HG/T 5459-2018 Waste tire pyrolysis carbon black
HG/T 5770-2020 Ammonia cracking hydrogen production catalyst
SH/T 1142-2020 Industrial cracked carbon four-liquid sampling method
HG/T 5316-2018 Ammonia cracking hydrogen production catalyst activity test method

International Organization for Standardization (ISO), a-cleavage

ISO 9138:1993 Abrasive grains; sampling and splitting
ISO 9138:2015 Abrasive grains - Sampling and splitting
ISO 9137:1990 Abrasive grains; determination of capillarity
ISO 29841:2009 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
ISO 29841:2009/Amd 1:2016 Vegetable fats and oils — Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) — Amendment 1
ISO 6321:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
ISO 6321:1991 Animal and vegetable fats and oils; determination of melting point in open capillary tubes (slip point)
ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, a-cleavage

GB/T 34786-2017(英文版) Grain and oil machinery—Toothed cracking roll
GB 7131-1986 Identification of Polymers by Pyrolysis Gas Chromatography
GB/T 7131-1986 Identification of polymers by pyrolytic gas chromatography
GB/T 32662-2016 Complete set of pyrolysis equipment for waste rubber and waste plastic to oil
GB/T 29613.1-2013 Rubber.Analysis by pyrolytic gas-chromatographic methods.Part 1:Identification of polymers (single polymers and polymer blends)
GB/T 29613.2-2014 Rubber.Analysis by pyrolytic gas-chromatographic methods.Part 2:Determination of styrene/butadiene/isoprene ratio

Henan Provincial Standard of the People's Republic of China, a-cleavage

DB41/T 1490-2017 Oil sediment cracking treatment device

British Standards Institution (BSI), a-cleavage

BS ISO 9138:2015 Abrasive grains. Sampling and splitting
BS 7425-3:1993 Abrasive grains - Method for sampling and splitting
BS EN ISO 29841:2014+A1:2016 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
BS ISO 29841:2009 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
BS EN ISO 6321:2002 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
BS EN ISO 6321:2021 Animal and vegetable fats and oils. Determination of melting point in open capillary tubes. Slip point
BS EN ISO 3211:2010 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation

WRC - Welding Research Council, a-cleavage

BULLETIN 375-1992 THE SIGNIFICANCE OF THE A/W RATIO ON FRACTURE TOUGHNESS OF A-36 STEEL
BULLETIN 418-1997 CONSTRAINT EFFECTS ON FRACTURE BEHAVIOR: I) THE EFFECT OF CRACK DEPTH (A) AND CRACK-DEPTH TO WIDTH RATIO (A/W) ON THE FRACTURE TOUGHNESS OF A533-B STEEL ; II) AN ANALYTICAL INVESTIGATION OF THE EFFECT
BULLETIN 88-1963 FRACTURE ANALYSIS DIAGRAM PROCEDURES FOR THE FRACTURE-SAFE ENGINEERING DESIGN OF SHELL STRUCTURES
BULLETIN 351-1990 AN ANALYTICAL COMPARISON OF SHORT CRACK AND DEEP CRACK CTOD FRACTURE SPECIMENS OF AN A36 STEEL ; THE EFFECTS OF CRACK DEPTH ON ELASTIC-PLASTIC CTOD FRACTURE TOUGHNESS; A COMPARISON OF THE J-INTEGRAL A
BULLETIN 140-1969 FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL ALUMINUM ALLOYS
BULLETIN 130-1968 ADVANCES IN FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND IN QUANTITATIVE INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL STEELS
BULLETIN 478-2003 STRESS INTENSITY AND CRACK GROWTH OPENING AREA SOLUTIONS FOR THROUGH-WALL CRACKS IN CYLINDERS AND SPHERES
BULLETIN 276-1982 A SUMMARY AND CRITICAL EVALUATION OF STRESS INTENSITY FACTOR SOLUTIONS OF CORNER CRACKS AT THE EDGE OF A HOLE
BULLETIN 409-1996 FUNDAMENTAL STUDIES OF THE METALLURGICAL CAUSES AND MITIGATION OF REHEAT CRACKING IN 1?CR-?MO AND 2?CR-1MO STEELS
BULLETIN 134-1968 PROCEDURES FOR FRACTURE TOUGHNESS CHARACTERIZATION AND INTERPRETATIONS TO FAILURE-SAFE DESIGN FOR STRUCTURAL TITANIUM ALLOYS
BULLETIN 400-1995 INTERPRETIVE REPORT ON WELDABILITY TESTS FOR HYDROGEN CRACKING OF HIGHER STRENGTH STEELS AND THEIR POTENTIAL FOR STANDARDIZATION
BULLETIN 471-2002 DEVELOPMENT OF STRESS INTENSITY FACTOR SOLUTIONS FOR SURFACE AND EMBEDDED CRACKS IN API 579
BULLETIN 404-1995 FATIGUE CRACK GROWTH OF LOW-ALLOY STEELS IN LIGHT WATER REACTOR ENVIRONMENTS: I)ENVIRONMENTALLY-ASSISTED CRACKING OF FERRITIC STEELS IN AQUEOUS ENVIRONMENTS: AN INTERPRETIVE REVIEW ; II)MODELING OF FA

American Welding Society (AWS), a-cleavage

WRC 375:1992 The Significance Of The a/W Ratio On Fracture Toughness Of A-36 Steel
WRC 140:1969 Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys
WRC 130:1968(1976) Advances in Fracture Toughness characterization Procedures and in Quantitative Interpretations to Fracture-Safe Design for Structural Steels
WRC 478:2003 Stress Intensity And Crack Growth Opening Area Solutions For Through-Wall Cracks In Cylinders And Spheres
WRC 276:1982 A Summary and Critical Evaluation of Stress Intensity Factor Solutions of Corner Cracks at the Edge of a Hole
WRC 134:1968 Procedures For Fracture Toughness Characterization and Interpretations to Failure-Safe Design for Structural Titanium Alloys
WRC 400:1995 Interpretive Report on Weldability Tests for Hydrogen Cracking of Higher Strength Steels and Their Potential for Standardization
WRC 471:2002 Development of Stress Intensity Factor Solutions For Surface and Embedded Cracks in API 579
WRC 409:1996 Fundamental Studies of the Metallurgical Causes and Mitigation of Reheat Cracking in 1 1/4 Cr-1/2 Mo and 2 1/4 Cr-1Mo Steels

API - American Petroleum Institute, a-cleavage

API TR 2575-2014 Measurement of Thermally Cracked Gas (FIRST EDITION)
API RP 945-1990 Avoiding Environmental Cracking in Amine Units (First Edition)
API RP 945-1997 Avoiding Environmental Cracking in Amine Units (Second Edition)
API RP 945-2003 Avoiding Environmental Cracking in Amine Units (Third Edition)
API BULL 939E-2008 Identification@ Repair@ and Mitigation of Cracking of Steel Equipment in Fuel Ethanol Service (FIRST EDITION)
API PUBL 32-32751-1985 28-DAY DERMAL TOXICITY STUDY IN THE RABBIT API 83-07 LIGHT CATALYTIC CRACKED DISTILLATE CAS 64741-59-9
API BULL 939-E-2013 Identification@ Repair@ and Mitigation of Cracking of Steel Equipment in Fuel Ethanol Service (SECOND EDITION)
API TR 934-F PART 3-2017 Subcritical Cracking of Modern 2?Cr-1Mo-?V Steel Due to Dissolved Internal Hydrogen and H2 Environment@ Research Report (FIRST EDITION)

SE-SIS, a-cleavage

SIS SS 16 22 26-1980 Rubber - Determination of cracking during exposure to outdoor atmosphere

TR-TSE, a-cleavage

TS 393-1966 METHOO OF DETERMIN?NG THE BURSTING RESISTANCE OF TEXTILE FABRICS

中国石油化工总公司, a-cleavage

SH 1142-1992 Industrial cracked carbon four-liquid sampling method

U.S. Air Force, a-cleavage

AIR FORCE MS29515 REV B VALID NOTICE 3-2008 Adapter, Pressure Fuel Servicing, Types A-1 and A-6

CZ-CSN, a-cleavage

CSN 64 0129-1953
CSN 42 2534 Za-1985
CSN 42 2531 Za-1985
CSN ISO 6321:1994 Animal and vegetables fats and oils.Determination of melting point in open capillary tubes(slip point)
CSN 64 3611 Za-1988

European Committee for Standardization (CEN), a-cleavage

EN 12885:1999 Biotechnology - Performance criteria for cell disrupters
EN ISO 29841:2014 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009)
EN ISO 29841:2014/A1:2016 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009/AMD 1:2016)
EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021)
EN ISO 6321:2002 Animal and Vegetable Fats and Oils - Determination of Melting Point in Open Capillary Tubes (Slip Point)
EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)

Professional Standard - Petroleum, a-cleavage

SY/T 5778-1995 Rock thermal cracking geochemical mud logging specification

Professional Standard - Chemical Industry, a-cleavage

HGJ 230-1989 Construction Technical Regulations for Cracking Furnace of Ethylene Plant
HG/T 5459～5462-2018 Waste tire pyrolysis carbon black, rubber airbags for supporting dams, ethyl silicate coupling agent and ureidosilane coupling agent (2018)

国家市场监督管理总局、中国国家标准化管理委员会, a-cleavage

GB/T 40009-2021 Technical specification of waste tyre/rubber pyrolysis
GB/T 39699-2020 Rubber—Identification of polymers—Pyrolytic gas-chromatographic method using mass-spectrometric detection

ACI - American Concrete Institute, a-cleavage

ACI 231R-2010 Report on Early-Age Cracking: Causes@ Measurement@ and Mitigation

司法部, a-cleavage

SF/T 0108-2021 Paint Inspection Pyrolysis-Gas Chromatography/Mass Spectrometry

Japanese Industrial Standards Committee (JISC), a-cleavage

JIS K 6259:1993 Testing methods of resistance to ozone cracking for vulcanized rubber
JIS K 6260:1993 Flex cracking test methods for vulcanized rubber
JIS K 5600-8-4:1999 Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 4: Designation of degree of cracking

Professional Standard - Agriculture, a-cleavage

73药典三部-2015 Monograph Ⅰ Prevention of Influenza-like Virus Split Vaccine
80药典三部-2020 Monograph Ⅰ Prevention of Influenza-like Virus Split Vaccine
1810药典一部-2010 Appendix XII A Disintegration Time Limit Test Method
2360药典二部-2010 Appendix Ⅹ A Disintegration time limit test method
54药典三部-2010 Contents of each monograph Ⅰ Preventive split vaccine against influenza-like virus
222药典第三增补本-2010 Appendices of the Second Revised Appendices Appendix Ⅹ A Disintegration Time Limit Inspection Method
SN/T 5582-2023 Determination of Polyamide 66 Content in Regenerated Polyamide Blends by Pyrolysis/Gas Chromatography-Mass Spectrometry

农业农村部, a-cleavage

NY/T 4161-2022 Technical specifications for biomass thermal cracking and carbonization process
NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis

Military Standards (MIL-STD), a-cleavage

DOD A-A-53192 A-1988 SPLINT, TRACTION-EXTRICATION [Use In Lieu Of: DOD A-A-0053192]
DOD A-A-51497 A-1992 SODIUM FLUORIDE ORAL SOLUTION, USP [Use In Lieu Of: DOD A-A-0051497]

United States Navy, a-cleavage

NAVY MS29519 REV C NOTICE 2-1996 ADAPTER, PRESSURE FUEL SERVICING VARIABLE CONFIGURATION, TYPE A-5
NAVY MS29519 REV C NOTICE 1-1961 ADAPTER, PRESSURE FUEL SERVICING VARIABLE CONFIGURATION, TYPE A-5
NAVY MS29519 REV C-1956 ADAPTER, PRESSURE FUEL SERVICING VARIABLE CONFIGURATION, TYPE A-5

American Society for Testing and Materials (ASTM), a-cleavage

ASTM C1137-97 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D3452-06 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D3452-06(2021) Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
ASTM D3452-06(2012) Standard Practice for Rubbermdash;Identification by Pyrolysis-Gas Chromatography

Association Francaise de Normalisation, a-cleavage

NF P94-067:1992 Soils : investigation and tests. Degradability coefficient of rocky material.
NF X70-100:1986 Fire tests. Analysis of pyrolysis and combustion gases. Tube furnace method.
NF EN ISO 29841:2014 Corps gras d'origine végétale - Détermination des produits de décomposition des chlorophylles a et a' (phéophytines a, a' et pyrophéophytines)
NF T60-516/A1*NF EN ISO 29841/A1:2016 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) - Amendment 1
NF EN ISO 29841/A1:2016 Corps gras d'origine végétale - Détermination des produits de décomposition des chlorophylles a et a' (phéophytines a, a' et pyrophéophytines) - Amendement 1
NF T60-226:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point).
NF T60-226*NF EN ISO 6321:2021 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point
NF A03-183:1987 Iron and steel - Mechanics of fracture - Determination from curve J-△a of the conventional characteristic values J and dJ/da of the ductile tear strength
NF T60-516*NF EN ISO 29841:2014 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
NF EN ISO 13805:2009 Émaux vitrifiés déposés sur l'aluminium - Détermination de l'adhérence à l'aide d'un électrolyte (essai d'écaillage)

未注明发布机构, a-cleavage

NF P94-067 Soils. Investigations and tests. Fragmentation coefficients of rock materials

Professional Standard - Military and Civilian Products, a-cleavage

WJ/Z 424.20-2000 Artillery General Parts Tool A Type Uncone

国家能源局, a-cleavage

SY/T 5237-2019 Hydrogen isotope analysis of water by zinc reduction and high temperature cracking methods
NB/SH/T 0986-2019 Determination of total oxygen content in gasoline, diesel and methanol fuels - reduction cracking method

German Institute for Standardization, a-cleavage

DIN EN ISO 29841:2016-10 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009 + AMD 1:2016); German version EN ISO 29841:2014 + A1:2016
DIN EN ISO 29841:2014 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009); German version EN ISO 29841:2014
DIN EN ISO 29841:2016 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009 + AMD 1:2016) (includes Amendment :2016)
DIN EN ISO 6321:2002 Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002

ES-UNE, a-cleavage

UNE-EN ISO 29841:2014/A1:2016 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009/AMD 1:2016)
UNE-EN ISO 29701:2010 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test (ISO 29701:2010) (Endorsed by AENOR in October of 2010.)
UNE-EN ISO 11343:2020 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)

Anhui Provincial Standard of the People's Republic of China, a-cleavage

DB34/T 1749-2012 Ethylene cracking furnace tube temperature safety monitoring and early warning system

AT-ON, a-cleavage

ONORM N 3001-1991 Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point)

Korean Agency for Technology and Standards (KATS), a-cleavage

KS H ISO 6321:2008 Animal and vegetable fats and oils－Determination of melting point in open capillary tubes (slip point)
KS D ISO 3211:2012 Anodizing of aluminium and its alloys-Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS D ISO 3211:2013 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation

Professional Standard - Public Safety Standards, a-cleavage

GA/T 1516-2018 Forensic Science Tire Rubber Inspection Pyrolysis-Gas Chromatography-Mass Spectrometry

AENOR, a-cleavage

UNE-EN ISO 29841:2014 Vegetable fats and oils - Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) (ISO 29841:2009)

Institute of Electrical and Electronics Engineers (IEEE), a-cleavage

IEEE Std C57.156-2016 IEEE Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE Std 1226.6-1996 Guide for the understanding of the "A broad based environment for test (ABBET) TM" standard
IEEE PC57.156/D4.1, September 2015 IEEE Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE PC57.156/D4.3, April 2016 IEEE Approved Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE PC57.156/D4, February 2015 IEEE Approved Draft Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors

National Association of Corrosion Engineers (NACE), a-cleavage

NACE 8X294-2013 Review of Published Literature on Wet H2S Cracking of Steels Through 1989 (Item No. 24185)
NACE TM0498-2002 Standard Test Methods for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes Item No. 21235
NACE RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments Item No. 21078

European Committee for Electrotechnical Standardization（CENELEC）, a-cleavage

HD 505.4.2 S1-1992 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 4: Methods Specific to Polyethylene and Polypropylene Compounds Section Two - Elongation at Break After Pre-Conditioning - Wrapping Test After Thermal Ageing in Air - Measu

Professional Standard - Electron, a-cleavage

SJ/T 11149.1-1997 Detail specification for aluminium cases type A for use in aluminium electrolytic capacitors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., a-cleavage

IEEE 1226.6-1996 "Guide for the Understanding of the ""A Broad Based Environment for Test (ABBET)TM"" Standard"
IEEE PC57.156/D4.3-2016 Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
IEEE C57.156-2016 Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors

RU-GOST R, a-cleavage

GOST R EN 12091-2010 Thermal insulating products in building applications. Method for determination of freeze-thaw resistance
GOST 10793-1964 Cotton, rayon and mixed fabrics. Method for determination of resistance to photooxidative destruction

Professional Standard - Earthquake, a-cleavage

DB/T 14-2000 Code of hydraulic fracturing and overcoring method for in-situ stress measurement
DB/T 14-2018 Technical specification for hydraulic fracturing method and sleeve core release method for in-situ stress measurement

American Society of Mechanical Engineers (ASME), a-cleavage

ASME STP-PT-071-2014 STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS

Professional Standard - Energy, a-cleavage

NB/T 10618-2021 Guidelines for inspection, evaluation and maintenance of radiant section furnace tubes of in-service ethylene cracking furnaces

Professional Standard - Textile, a-cleavage

FZ/T 01164-2022 Screening and pyrolysis-gas chromatography-mass spectrometry of phthalates in textiles

国家药监局, a-cleavage

YY/T 1746-2020 Test method for breaking strength of absorbable surgical sutures after in vitro hydrolysis

Institute of Interconnecting and Packaging Electronic Circuits (IPC), a-cleavage

IPC TM-650 2.4.16-1982 Initiation Tear Strength, Flexible Insulating Materials; Revision A - December 1982
IPC TM-650 2.4.17.1-1982 Propagation Tear Strength, Flexible Insulating Material; Revision A - December 1982
IPC PE-740A-1997 Troubleshooting for Printed Board Manufacture and Assembly Revision A

YU-JUS, a-cleavage

JUS K.F0.020-1989 Gralns of fused aJumlnJum oxlde and sillcon carbide. for abrasJve products. Sampling and splJttlng

Society of Automotive Engineers (SAE), a-cleavage

SAE J2928-2012 Brake Rotor Thermal Cracking Procedure for Vehicles Below 4 540 kg GVWR
SAE AMS4650M-2013 Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu 1.9Be Solution Heat Treated TB00 (A)

SAE - SAE International, a-cleavage

SAE J2928-2018 Brake Rotor Thermal Cracking Procedure for Vehicles Below 4 540 kg GVWR

(U.S.) Ford Automotive Standards, a-cleavage

FORD ESE-M2D8-B-2004 SILICONE RUBBER, HIGH TEAR-HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M3G225-A-2021 TAPE, PRESSURE SENSITIVE, NON-STAINING, TEARABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D8-B2-2004 SILICONE RUBBER, HIGH TEAR-HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P87-B1-2013 PLATING, ELECTROLYTIC ZINC-NICKEL, PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M99J377-A-2012 COATING, CONFORMAL, SOLVENT FREE SILICONE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M99J378-A-2012 COATING, CONFORMAL, SILICONE OXIME CURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M6J152-B1-2008 PRIMER SURFACER, MODIFIED POLYESTER, CHIP AND SCRATCH INHIBITING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4G340-A-2014 SEALER, URETHANE BASED, HEAT CURING, PAINTABLE, ANTI-CRACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P85-B1-2011 PLATING, ELECTROLYTIC ZINC, 5 MICROMETERS, THIN FILM PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M7C62-A-2012 RUST PREVENTATIVE - WATER SOLUBLE - BIODEGRADABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M6J156-A-2012 PRIMER SURFACER, 2-COMPONENT, CHIP RESISTANT THERMOPLASTIC SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M7C62-A-2004 RUST PREVENTATIVE - WATER SOLUBLE - BIODEGRADABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P87-B2-2013 PLATING, ELECTROLYTIC ZINC-NICKEL, PASSIVATE, ORGANIC SEALANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99J311-A2-2005 CHIP RESISTANT COATING - ONE-COMPONENT URETHANE - PAINTABLE, LOW HEAT CURING, NON-MASKING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M99J311-A
FORD ESP-M2D130-A2-2004 ETHYLENE ACRYLIC RUBBER, LOW TEMPERATURE RESISTANT-TEAR RESISTANT - OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M6J175-A2-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, FULL BODIES (Shown on WSS-M6J175-A)
FORD ESB-M99J291-A2-2005 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, EXTERIOR - 0.20 MM (8 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M99J291-A
FORD ESB-M99C109-A-2004 LUBRICANT OIL, HIGHLY REFINED ISOPARAFFINIC STREAM, LOW SOLVENCY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4P12-A1-2003 ANODIZED (ANODIC) COATING FOR CAST ALUMINUM, ELECTROLYTIC TYPE, HARD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99C109-A-2009 LUBRICANT OIL, HIGHLY REFINED ISOPARAFFINIC STREAM, LOW SOLVENCY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1P87-B3-2013 PLATING, ELECTROLYTIC ZINC-NICKEL, PASSIVATE, ORGANIC SEALANT, BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***

US-CFR-file, a-cleavage

CFR 11-111.18-2014 Federal elections. Part111:Compliance procedure (52 U.S.C. 30109, 30107(a)). SubpartA:Enforcement. Section111.18:Conciliation (52 U.S.C. 30109(a)(4)).
CFR 10-20.1006-2014 Energy. Part20:Standards for protection against radiation. Subpart A:General Provisions. Section20.1006:Interpretations.

VN-TCVN, a-cleavage

TCVN 6119-2007 Animal and vegetable fats and oils.Determination of melting point in open capillary tubes (slips point)

Hainan Provincial Standard of the People's Republic of China, a-cleavage

DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

CEN - European Committee for Standardization, a-cleavage

EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation

HU-MSZT, a-cleavage

MNOSZ 22652-1956

ESDU - Engineering Sciences Data Unit, a-cleavage

ESDU 78036 A-2013 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations
ESDU 78036 A-1980 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations.

ZA-SANS, a-cleavage

SANS 11431-1:2003 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 1: Static strain test

海关总署, a-cleavage

SN/T 5414-2022 Determination of 33 banned and restricted substances in recycled plastics using pyrolysis gas chromatography-mass spectrometry screening method
SN/T 5342-2021 Determination of phthalates in imported and exported textiles by pyrolysis-gas chromatography-mass spectrometry qualitative screening method

TIA - Telecommunications Industry Association, a-cleavage

TIA/EIA-136-440-A-1-2005 TDMA Third Generation Wireless – Adaptive Multi Rate (AMR) Codec – Release A – Addendum 1 (Addendum 1 to TIA/EIA-136-440-A)

North Atlantic Treaty Organization Standards Agency, a-cleavage

STANAG 4485-2002 SHF MILSATCOM NON-EPM MODEM FOR SERVICES CONFORMING TO CLASS-A OF STANAG 4484

AGMA - American Gear Manufacturers Association, a-cleavage

09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation@ Initiation@ Progression and Prevention

Guangdong Provincial Standard of the People's Republic of China, a-cleavage

DB44/T 938-2011 Identification of ethylene-octene copolymer and determination of octene content by pyrolysis gas chromatography-mass spectrometry

Standard Association of Australia （SAA）, a-cleavage

AS 1774.9:2007 Refractories and refractory materials - Physical test methods - Determination of resistance to the disintegrating effect of carbon monoxide

Professional Standard - Environmental Protection, a-cleavage

HJ 917-2017 Determination of Gaseous Mercury in Exhaust Gases from Stationary Pollution Sources Activated Carbon Adsorption/Pyrolysis Atomic Absorption Spectrophotometry

Xinjiang Provincial Standard of the People's Republic of China, a-cleavage

DB65/T 3910-2016 Determination of total mercury in flue gas of coal-fired power plants Adsorption-pyrolysis atomic absorption spectrophotometry by activated carbon tube

(U.S.) Telecommunications Industries Association , a-cleavage

TIA/EIA-3700-1999 Telephone Network Transmission Model for Evaluating Analog Modem Performance (Supersedes TSB37-A)

Danish Standards Foundation, a-cleavage

DS/EN ISO 29701:2010 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test