ZH
RU
ES

a-cracking method

a-cracking method, Total:500 items.

In the international standard classification, a-cracking method involves: Rubber, Products of the chemical industry, Construction materials, Cutting tools, Products of the textile industry, Organic chemicals, Analytical chemistry, CHEMICAL TECHNOLOGY, Waxes, bituminous materials and other petroleum products, Protection against crime, Medical equipment, Mining and quarrying, Footwear, Leather technology, Wood, sawlogs and sawn timber, Welding, brazing and soldering, Protection against fire, Water quality, Biology. Botany. Zoology, Protection of and in buildings, Textile fibres, Paints and varnishes, Refractories, Ceramics, Headgear. Clothing accessories. Fastening of clothing, Testing of metals, Rubber and plastics products, Farming and forestry, Road vehicle systems, Shipbuilding and marine structures in general, Sensory analysis, Pulps, Extraction and processing of petroleum and natural gas, Fuels, Gas and steam turbines. Steam engines, Mechanical testing, Paper and board, Iron and steel products, Plastics, Coals, Internal combustion engines for road vehicles, Materials for the reinforcement of composites, Fishing and fish breeding, Beekeeping, Graphical symbols, Equipment for petroleum and natural gas industries, Fluid power systems, Conducting materials, Metalliferous minerals, Linear and angular measurements, Environmental protection, Adhesives, Jewellery, Non-metalliferous minerals, Geology. Meteorology. Hydrology, Continuous handling equipment, Wood-based panels, Medical sciences and health care facilities in general, Kitchen equipment, Meat, meat products and other animal produce, Non-ferrous metals, Telecommunication systems.

TR-TSE, a-cracking method

TS 393-1966 METHOO OF DETERMIN?NG THE BURSTING RESISTANCE OF TEXTILE FABRICS
TS 395-1966 METHOD OF DETERMINING THE TEARING RESISTANCE OF VVOVEN FABRICS
TS 253-1965 METHOD OF DETERMIN?NG THE WEFT AND WARP BREAKING STRENGTH OF THE CLOTH
TS 1998-1975 TEARING STRENGTH OF WOVEN FABRICS BY THE TONGUE (SINGLE RIP) METHOD (CONSTANT — RATE — OF — EXTENSION TENSILE TESTING MACHINE)

Japanese Industrial Standards Committee (JISC), a-cracking method

JIS K 6259:1993 Testing methods of resistance to ozone cracking for vulcanized rubber
JIS K 6260:1993 Flex cracking test methods for vulcanized rubber
JIS K 5600-8-4:1999 Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 4: Designation of degree of cracking
JIS Z 3152:1962 Bar type cracking test
JIS P 8101:1994 Testing method for dissolving pulp
JIS A 1151:2002 Method of test for drying shrinkage cracking of restricted concrete
JIS K 6252:1993 Tear testing methods for vulcanized rubber
JIS Z 3156:1963 Method of angle expanding type cracking test for fillet welds
JIS Z 3155:1993 Method of FISCO test
JIS P 8116:2000 Paper -- Determination of tearing resistance --Elmendorf tearing tester method
JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method
JIS R 2213:1995 Test method for modulus of rupture of refractory bricks
JIS A 1113:1999 Method of test for splitting tensile strength of concrete
JIS A 1113:2006 Method of test for splitting tensile strength of concrete
JIS Z 3153:1993 Method of T-joint weld cracking test
JIS Z 3157:1993 Method of U-groove weld cracking test
JIS Z 3158:1993 Method of y-groove weld cracking test
JIS Z 3159:1993 Method of H-type restrained weld cracking test
JIS Z 3158:2016 Method of y-groove weld cracking test
JIS A 1509-4:2008 Test methods for ceramic tiles -- Part 4: Determination of modulus of rupture and breaking strength
JIS A 1113:2018 Method of test for splitting tensile strength of concrete
JIS K 6260:1999 Testing method of flex cracking and crack growth for rubber, vulcanized or thermoplastic (De Mattia)
JIS A 1509-4:2014 Test methods for ceramic tiles.Part 4: Determination of modulus of rupture and breaking strength

工业和信息化部, a-cracking method

HG/T 5316-2018 Ammonia cracking hydrogen production catalyst activity test method
SH/T 1142-2020 Industrial cracked carbon four-liquid sampling method

American Society for Testing and Materials (ASTM), a-cracking method

ASTM C1137-97 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D2212-00(2015) Standard Test Method for Slit Tear Resistance of Leather
ASTM D3452-06(2012) Standard Practice for Rubbermdash;Identification by Pyrolysis-Gas Chromatography
ASTM D4704-13(2023) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D3786/D3786M-18(2023) Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D5587-96 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D5587-07ae1 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D5587-15(2019) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D4704-13(2017) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4704-00(2005) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4704-00 Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D2941-00(2004) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-00 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-00(2008) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-00(2012) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-21 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-13 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D3786-08 Standard Test Method for Bursting Strength of Textile Fabricsx2014;Diaphragm Bursting Strength Tester Method
ASTM D3786-08a Standard Test Method for Bursting Strength of Textile Fabricsx2014;Diaphragm Bursting Strength Tester Method
ASTM D3786/D3786M-09 Standard Test Method for Bursting Strength of Textile Fabricsx2014;Diaphragm Bursting Strength Tester Method
ASTM D3786/D3786M-13 Standard Test Method for Bursting Strength of Textile Fabricsmdash;Diaphragm Bursting Strength Tester Method
ASTM D3786/D3786M-12 Standard Test Method for Bursting Strength of Textile Fabricsmdash;Diaphragm Bursting Strength Tester Method
ASTM D3786/D3786M-18 Standard Test Method for Bursting Strength of Textile Fabrics&x2014;Diaphragm Bursting Strength Tester Method
ASTM D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-14 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM E1290-99 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1290-08 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM D3786-06e1 Standard Test Method for Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
ASTM D3786-06 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
ASTM D6075-00 Standard Test Method for Cracking Resistance of Leather
ASTM D6075-00(2005) Standard Test Method for Cracking Resistance of Leather
ASTM D6075-00(2010) Standard Test Method for Cracking Resistance of Leather
ASTM C648-20 Standard Test Method for Breaking Strength of Ceramic Tile
ASTM D6075-13(2020) Standard Test Method for Cracking Resistance of Leather
ASTM D3786-01 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
ASTM E1290-07 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM D5041-98 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D5041-98(2004) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM E1290-02e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1290-02 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM D5041-98(2012) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1221-10 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM D1578-93(2006)e1 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM C99-87(2006) Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM D774/D774M-97(2002) Standard Test Method for Bursting Strength of Paper
ASTM D2212-00(2005) Standard Test Method for Slit Tear Resistance of Leather
ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM D2212-00 Standard Test Method for Slit Tear Resistance of Leather
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM D774/D774M-97(2007) Standard Test Method for Bursting Strength of Paper
ASTM C99/C99M-09 Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM D2212-00(2010) Standard Test Method for Slit Tear Resistance of Leather
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13 Standard Test Method for Measurement of Fracture Toughness
ASTM D2212-00(2021) Standard Test Method for Slit Tear Resistance of Leather
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM D3170-12 Standard Test Method for Chipping Resistance of Coatings
ASTM C1006-07(2013) Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM D6075-13 Standard Test Method for Cracking Resistance of Leather
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM D3787-01 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM D3787-89 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM C120-05e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E139-00 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E139-00e1 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E139-06 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM E139-11 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM E1290-08e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E2004-99 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM C648-98 Standard Test Method for Breaking Strength of Ceramic Tile

British Standards Institution (BSI), a-cracking method

BS 7425-3:1993 Abrasive grains - Method for sampling and splitting
BS EN ISO 16177:2012 Footwear. Resistance to crack initiation and growth. Belt flex method
BS ISO 8588:2017 Sensory analysis. Methodology. "A". "not A" test
PD 6605-2-1998 Guidance on methodology for assessment of stress-rupture data. Computing methods
BS 4674:1971 Methods for the determination of the breaking load and knot breaking load of netting yarns for fishing nets
BS 3137:1972 Methods for determining the bursting strength of paper and board
BS EN ISO 10717:2010 Footwear. Test method for slide fasteners. Burst strength
BS 3424-5:1982 Testing coated fabrics - Methods 7A, 7B and 7C - Methods for determination of tear strength
BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
BS EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
BS ISO 27306:2010 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 9186-1:2014 Graphical symbols. Test methods. Method for testing comprehensibility

Group Standards of the People's Republic of China, a-cracking method

T/CSATC 9-2022 Test method for identification of weight-added silk floss-Py-GC-MS method
T/CNTAC 153-2023 Textiles—Screening method of quinoline—Pyrolysis-gas chromatography-mass spectrometry method
T/QAS 060-2021 Determination of Mercury in Brine Pyrolysis Atomic Absorption Spectrophotometry
T/CBPIA 0003-2022 Determination of the activity of chondroitin sulfate lyase by spectrophotometry
T/CNTAC 154-2023 Textiles—Screening method of permethrin—Pyrolysis-gas chromatography-mass spectrometry method
T/SDHCIA 002-2020 Catalytic cracking method of coking ammonia distillation wastewater treatment engineering technical specification
T/CSTM 00335-2022 Determination method of brake rotor thermal cracking for vehicles
T/CNTAC 151-2023 Textiles—Screening method of benzotriazoles—Pyrolysis-gas chromatography-mass spectrometry method
T/AQSPMK 002-2023 Test method of artificial leather and synthetic leather—Determination of tear strength —Trouser-shaped (single-tear) test
T/AQSPMK 0002-2023 Test method of artificial leather and synthetic leather — Determination of tear strength —Trouser-shaped (single-tear) test
T/SDAQI 050-2021 Ecologically degradable plastics Thermal oxygen degradation test method
T/SDAQI 049-2021 Ecologically degradable plastics Photooxidation test method
T/SDAQI 051-2021 Ecologically degradable plastics Biodegradation test method
T/SJZSYYQXH JZ004-2023 Calibration method of anti-bending fixture and splitting fixture
T/SHYQ 7-2017 Emerald (Cargo A) Inspection method
T/CNTAC 152-2023 Textiles—Screening method of methylsiloxanes—Pyrolysis-gas chromatography-mass spectrometry method

Professional Standard - Petrochemical Industry, a-cracking method

SH/T 1142-2009 Cracking C fraction for industrial use-Sampling in the liquid phase
SH/T 1142-1992 Liquid Sampling Method of Industrial Cracking C4
SH/T 0778-2005 Determination of paraffin wax content of asphalts by cracking and deoiling method
SH/T 1793-2015 Cracking C<下标9> for industrial use.Determination of components.Gas chromatographic method
SH/T 1141-1992 Determination of the composition of cracked C4 for industrial use (gas chromatography)
SH/T 1141-2015 Cracking C<下标4> fraction for industrial use.Determination of hydrocarbon composition.Gas chromatographic method
SH/T 1144-1992 Determination of trace water in cracked carbon four for industrial use (Karl Fischer method)
SH/T 1790-2015 Cracking C<下标5> fraction for industrial use.Determination of hydrocarbon components.Gas chromatographic method
SH/T 1145-1992 Determination of α-alkyne content in cracked C4 for industrial use (silver nitrate method)
SH/T 1143-1992 Determination of density or relative density of pyrolysis carbon dioxide for industrial use (pressure float method)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, a-cracking method

GB 7131-1986 Identification of Polymers by Pyrolysis Gas Chromatography
GB/T 7131-1986 Identification of polymers by pyrolytic gas chromatography
GB/T 23806-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam(SEPB)method
GB/T 7732-1987 Standard test method for surface-crack fracture toughness Kle of metallie plates
GB/T 16578-1996 Plastics--Film and sheeting--Determination of tear resistance--Trouser tear method
GB/T 14337-1993 Testing method for breaking strength and breaking elongation of synthetic staple fibres
GB 12316-1990 Sensory Analysis Method "A" - "Not A" Test
GB/T 12316-1990 Sensory analysis--Methodology--"A"-"not A" test
GB/T 7732-2008 Metallic materials.Fracture toughness testing method with surface crack tension specimens
GB/T 8696-1988 Textiles--Yarns from packages--Method of test for breaking strength of yarn--Skein method
GB/T 4925-1985 Testing method for breaking load and elongation of netting of synthetic fibre
GB 5482-1993 Metallic materials－Dynamic tear testing method
GB/T 9446-1988 Welding--Cold cracking test method using implants
GB/T 5482-1993 Test method for dynamic tear energy of metallic materials
GB/T 8363-1987 Metallic materials--Drop-weight tear tests of ferritic steels
GB/T 14041.3-1993 Hydraulic fluid power.Filter elements.Verification of collapse/burst resistance
GB/T 8363-2007 Test method for drop-weight tear tests of steel products
GB/T 10322.6-2004 Iron ore-Determination of decrepitation index
GB/T 3903.12-2005 Footwear-Test methods for outsoles-Tear streagh
GB/T 5482-2023 Test method for dynamic tearing of metallic materials
GB/T 17928-1999 Leather--Determination of the stitch tear resistance
GB/T 5482-2007 Test method of metallic materials Dynamic tear
GB/T 6101-1985 Test method for breaking strength of cotton fibres--Flat bundle method
GB/T 12005.6-1989 Determination for hydrolysis degree of partly hydrolysis polyacrylamide
GB 12005.6-1989 Method for Determination of Degree of Hydrolysis of Partially Hydrolyzed Polyacrylamide
GB/T 1842-1999 Test method for environmental stresscracking of polyethylene plastics
GB/T 8650-1988 Test method of pipeline steels for resistance to stepwise cracking
GB/T 7985-1987 Conveyor belts--Carcass tear resistance--Method of test
GB/T 5882-1986 Testing method of bundle breaking tenacity of ramie fiber
GB/T 5886-1986 Testing method of single fiber breaking tenacity of ramie
GB/T 424-1978 Test methods of wet breaking strength for printed and dyed fabrics
GB/T 4710-1984 Method of test for breaking tenacity of wool fibre bundles
GB/T 427-1978 Test methods of stitching strength for printed and dyed fabrics
GB/T 27629-2011 Determination of breaking tenacity of animal fibre bundles
GB 5886-1986 Test method for breaking strength of ramie single fiber
GB/T 42914-2023 Test method for fracture toughness of aluminum alloy products
GB 5882-1986 Test method for breaking strength of ramie bundle fibers
GB/T 42903-2023 Determination method for creep crack and creep-fatigue crack growth rate of metallic materials
GB/T 18147.5-2000 Test method for hemp fibre-Part 5:Test method for breaking strength of hemp fibre
GB/T 18147.5-2015 Test method for hemp fiber.Part 5:Test method for breaking strength of hemp fiber
GB/T 18006.2-1999 Test method for determining the degradability of single use and degradable lunch container and drinking set
GB 12191-1990 Test methods of radiation pattern of the slotted-waveguide antenna for marine radar

中国石油化工总公司, a-cracking method

SH 1142-1992 Industrial cracked carbon four-liquid sampling method

司法部, a-cracking method

SF/T 0108-2021 Paint Inspection Pyrolysis-Gas Chromatography/Mass Spectrometry

RU-GOST R, a-cracking method

GOST R EN 12091-2010 Thermal insulating products in building applications. Method for determination of freeze-thaw resistance
GOST R 50203.4-1992 Smallwares. Method for determination of the breaking strength and breaking elongation
GOST 17316-1971 Artificial leather. Measuring method of tearing load and elongation of break
GOST 6611.2-1973 Textile threads. Methods for determination of breaking load and elongation at rupture
GOST R ISO 8588-2008 Sensory analysis. Methodology. "A" "not A" test
GOST R 56284-2014 Artificial leather. Measuring method of tearing load and elongation of break
GOST 28447.2-1990 Textured yarns. Method for determination of breaking strength and breaking elongation
GOST 29104.4-1991 Industrial fabrics. Method for determination of breaking stress and breaking extension
GOST ISO 8588-2011 Sensory analysis. Methodology - "A" - "not A" tests
GOST 6943.10-2015 Textile glass materials. Method for determination of breaking load and elongation at break
GOST 10793-1964 Cotton, rayon and mixed fabrics. Method for determination of resistance to photooxidative destruction
GOST 17074-1971 Artificial leather. Method for the determination of tear strength
GOST 29104.5-1991 Industrial fabrics. Methods for determination of test strength
GOST 23481-1979 Poultry meat. Method of hystological analysis
GOST 10650-2013 Peat. Methods for the determination of the disintegration degree
GOST R 56283-2014 Threads textile. Method for determination of the breaking load in loop

国家药监局, a-cracking method

YY/T 1746-2020 Test method for breaking strength of absorbable surgical sutures after in vitro hydrolysis

Korean Agency for Technology and Standards (KATS), a-cracking method

KS K 0534-2014 Test method for tearing strength of cloth: Wing rip method
KS K 0350-2022 Test method for bursting strength of cloth: Ball bursting method
KS F 2210-2004 Method of cleavage test for wood
KS F 2210-1994 Method of Cleavage Test for Wood
KS B 0860-2001 METHOD OF BAR TYPE CRACKING TEST
KS B 0860-1985 METHOD OF BAR TYPE CRACKING TEST
KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS K 0409-2006 Test method for breaking force and elongation at break of yarn：Single－end method
KS K 0409-1985 Test method for breaking force and elongation at break of yarn：Single－end method
KS B 0872-1995 Method of FISCO test
KS B 0858-2001 METHOD OF SILT TYPE CRACKING TEST
KS B 0843-2001 METHOD OF BREAK TEST FOR FILLET WELDS
KS B 0860-1971(1995) METHOD OF BAR TYPE CRACKING TEST
KS B 0843-1985 METHOD OF BREAK TEST FOR FILLET WELDS
KS B 0858-1985 METHOD OF SILT TYPE CRACKING TEST
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS K 0536-2014 Test method for tearing strength of cloth: Tongue method
KS K 0536-1986 Test method for tearing strength of cloth: Tongue method
KS B 0867-1995 Method of controlled thermal severity weld cracking test
KS B 0869-1995 Method of U-groove weld cracking test
KS B 0870-1995 Method of y-groove weld cracking test
KS M 6783-2009 Tear testing methods for vulcanized rubber
KS M 6783-1994 Tear testing methods for vulcanized rubber
KS M 6783-2014 Tear testing methods for vulcanized rubber
KS F 2210-2020 Test method for tensile cleavage of wood
KS B 0869-1995(2011) Method of U-groove weld cracking test
KS M 6783-1999 Tear testing methods for vulcanized rubber
KS Q ISO 8588-2003(2018)
KS K 0537-2014 Test method for tearing strength of cloth: Trapezoid method
KS M 3728-2011 Testing methods for cleavage strength of adhesive bonds
KS F 2127-1994 Testing method for tearing strength of geotextile
KS K 0769-2013 Test method for tearing strength of geotextile
KS B 0870-1995(2011) Method of y-groove weld cracking test
KS B 0859-1971(1995) METHOD OF ANGLE EXPANDING TYPE CRACKING TEST FOR FILLET WELDS
KS M 3728-1986 Testing methods for cleavage strength of adhesive bonds
KS B 0859-1985 METHOD OF ANGLE EXPANDING TYPE CRACKING TEST FOR FILLET WELDS
KS Q ISO 8588:2003 Sensory analysis－Methodology－“A”－“not A” test
KS K 0534-2019 Test method for tearing strength of cloth: Wing rip method
KS B 0954-2007 Methods of post weld heat treatment
KS M 3732-2011 Testing methods for creep rupture of adhesive bonds
KS B 0859-2001 METHOD OF ANGLE EXPANDING TYPE CRACKING TEST FOR FILLET WELDS
KS B 0530-2013 Method of H-type restrained weld cracking test
KS B 0843-1971(1995) METHOD OF BREAK TEST FOR FILLET WELDS
KS B 0530-1994(2009) Method of H-type restrained weld cracking test
KS K 0536-2019 Test method for tearing strength of cloth: Tongue method
KS M 3029-2002 TEST METHOD FOR TEAR PROPAGATION RESISTANCE OF PLASTIC FILM AND THIN SHEETING BY A SINGLETEAR METHOD
KS M 3210-2009 Plastics-Determination of cadmium-Wet decomposition method
KS M ISO 15850-2017(2022) Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS K ISO 13938-2:2022 Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
KS M 7070-2007 Testing method for dissolving pulp
KS M 7070-1982 Testing method for dissolving pulp
KS M 7070-2002 Testing method for dissolving pulp
KS D 0283-2005 Standard test method for drop-weight tear tests of ferritic steels
KS M ISO 20872:2012 Footwear-Test methods for outsoles-Tear strength
KS B 0530-1994 Method of H-type restrained weld cracking test
KS F 2423-2006 Method of test for splitting tensile strength of concrete
KS F 2423-2016 Method of test for splitting tensile strength of concrete
KS M 6790-2014 Testing methods of resistance to ozone cracking for vulcanized rubber
KS B 0867-2016 Method of controlled thermal severity weld cracking test
KS K 0796-2015 Test method for trapezoid tearing strength of geotextiles
KS M 5975-1994(2000) TESTING METHOD FOR EVALUATING DEGREE OF CRACKING OF DRIED FILM OFPAINTS
KS M ISO 20872:2020 Footwear — Test methods for outsoles — Tear strength
KS L 1608-2014(2019) Testing method for fracture toughness of fines ceramics at elevated temperature
KS B 0858-1971(1995) METHOD OF SILT TYPE CRACKING TEST
KS M ISO 20876:2012 Footwear-Test methods for insoles-Resistance to stitch tear
KS M ISO 20876:2020 Footwear — Test methods for insoles — Resistance to stitch tear
KS F 2423-2001 Method of test for splitting tensile strength of concrete
KS F 2423-1982 Method of test for splitting tensile strength of concrete
KS M ISO 20875:2020 Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance
KS M ISO 20875:2012 Footwear-Test methods for outsoles-Determination of split tear strength and delamination resistance
KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS K 0411-2017 Test method for breaking strength and elongation of textile webbing, tape and braided
KS D 1890-2012 Method for chemical analysis of electrolytic cathode copper
KS I ISO 5813-2014(2019) Water quality — Determination of dissolved oxygen — Iodometric method
KS D 1890-1987 Method for chemical analysis of electrolytic cathode copper
KS L 1600-2010 Testing methods for fracture toughness of high performance ceramics
KS M 6790-2005 Testing methods of resistance to ozone cracking for vulcanized rubber

Professional Standard - Agriculture, a-cracking method

1810药典一部-2010 Appendix XII A Disintegration Time Limit Test Method
2360药典二部-2010 Appendix Ⅹ A Disintegration time limit test method
222药典第三增补本-2010 Appendices of the Second Revised Appendices Appendix Ⅹ A Disintegration Time Limit Inspection Method
GB 4925-1985 Test method for breaking strength and elongation at break of synthetic fiber fishing net
NY/T 2635-2014 Test method for breaking tenacity of ramie fiber

Canadian General Standards Board （CGSB), a-cracking method

CAN/CGSB-4.2 NO.12.1-2016 Textile test methods Tearing strength - Single-rip method
CAN/CGSB-4.2 NO.12.2-2012 Textile test methods Tearing strength - Trapezoid method
CAN/CGSB-4.2 NO.9.2-M90-1990 Textile test methods Breaking strength of fabrics - Grab method - Constant-time-to-break principle
CGSB 4.2 NO. 12.2-95-CAN/CGSB AMD 1-2000 Textile Test Methods Tearing Strength - Trapezoid Method
CAN/CGSB-4.2 NO.9.1-M90-1990 Textile Test Methods Breaking Strength of Fabrics - Strip Method - Constant-Time-to-Break Principle

National Association of Corrosion Engineers (NACE), a-cracking method

NACE TM0498-2002 Standard Test Methods for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes Item No. 21235
NACE RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment Methodology

Professional Standard - Public Safety Standards, a-cracking method

GA/T 1516-2018 Forensic Science Tire Rubber Inspection Pyrolysis-Gas Chromatography-Mass Spectrometry

Professional Standard - Coal, a-cracking method

MT/T 968-2005 Description methodology of fracture in coal
MT/T 77-1994 Determination method of coal bed gas (desorption method)
MT/T 77-94

IN-BIS, a-cracking method

IS 8242-1976

European Committee for Electrotechnical Standardization（CENELEC）, a-cracking method

HD 505.4.2 S1-1992 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 4: Methods Specific to Polyethylene and Polypropylene Compounds Section Two - Elongation at Break After Pre-Conditioning - Wrapping Test After Thermal Ageing in Air - Measu

国家市场监督管理总局、中国国家标准化管理委员会, a-cracking method

GB/T 39699-2020 Rubber—Identification of polymers—Pyrolytic gas-chromatographic method using mass-spectrometric detection
GB/T 39558-2020 Sensory analysis—Methodology—“A”-“not A” test
GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 3903.12-2021 Footwear—Test methods for outsoles—Tear strength

国家能源局, a-cracking method

SY/T 5237-2019 Hydrogen isotope analysis of water by zinc reduction and high temperature cracking methods
NB/SH/T 0986-2019 Determination of total oxygen content in gasoline, diesel and methanol fuels - reduction cracking method
SY/T 6476-2017 Drop weight tear test method for pipeline steel pipes
SY/T 6302-2019 Test method for fracturing proppant conductivity

Malaysia Standards, a-cracking method

MS 55 Pt.10-1972

WRC - Welding Research Council, a-cracking method

BULLETIN 130-1968 ADVANCES IN FRACTURE TOUGHNESS CHARACTERIZATION PROCEDURES AND IN QUANTITATIVE INTERPRETATIONS TO FRACTURE-SAFE DESIGN FOR STRUCTURAL STEELS
BULLETIN 478-2003 STRESS INTENSITY AND CRACK GROWTH OPENING AREA SOLUTIONS FOR THROUGH-WALL CRACKS IN CYLINDERS AND SPHERES
BULLETIN 530- TEST METHODS FOR HYDROGEN INDUCED CRACKING
BULLETIN 471-2002 DEVELOPMENT OF STRESS INTENSITY FACTOR SOLUTIONS FOR SURFACE AND EMBEDDED CRACKS IN API 579

American Welding Society (AWS), a-cracking method

WRC 478:2003 Stress Intensity And Crack Growth Opening Area Solutions For Through-Wall Cracks In Cylinders And Spheres
WRC 530:2009 Test Methods for Hydrogen Induced Cracking
WRC 471:2002 Development of Stress Intensity Factor Solutions For Surface and Embedded Cracks in API 579

Association Francaise de Normalisation, a-cracking method

NF G62-212*NF EN ISO 16177:2012 Footwear - Resistance to crack initiation and growth - Belt flex method
NF X70-100:1986 Fire tests. Analysis of pyrolysis and combustion gases. Tube furnace method.
NF ISO 8588:2017 Analyse sensorielle - Méthodologie - Essai "A" - "non A"
NF EN 311:2002 Panneaux à base de bois - Arrachement de la surface - Méthode d'essai
NF V09-017:1984 Sensory analysis. Methodology. "A" or "not A" test.
NF G36-150*NF EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
NF G36-150:1970 Fishing nets. Determination of breaking load and knot breaking load of netting yarns.
NF EN 12774:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Détermination de la force de déchirure sur refente et résistance au délaminage
NF A47-210:1986 Steel wire ropes. Method for determination of breaking load.
NF EN 12771:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance au déchirement
NF G62-301*NF EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
NF EN ISO 15732:2005 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette préfissurée sur une seule face (méthode SEPB)
NF G92-002:1989 Cartables et sacs d'écoliers - Méthodes d'essais - Détermination de la force nécessaire au déchirement des matériaux constitutifs des articles manufacturés, méthode de déchirement pantalon.

ESDU - Engineering Sciences Data Unit, a-cracking method

ESDU 78036 A-2013 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations
ESDU 78036 A-1980 The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations.

Professional Standard - Earthquake, a-cracking method

DB/T 14-2000 Code of hydraulic fracturing and overcoring method for in-situ stress measurement
DB/T 14-2018 Technical specification for hydraulic fracturing method and sleeve core release method for in-situ stress measurement

Standard Association of Australia （SAA）, a-cracking method

AS 2542.2.5:2014 Sensory analysis, Method 2.5: Methodology — 'A-not A' test
AS 1774.9:2007 Refractories and refractory materials - Physical test methods - Determination of resistance to the disintegrating effect of carbon monoxide
AS ISO 10545.4:2020 Ceramic tiles, Method 4: Determination of modulus of rupture and breaking strength
AS/NZS 2205.4.1:2019 Methods for destructive testing of welds in metal, Method 4.1: Fracture test
AS/NZS 1301.400:2016 Methods of test for pulp and paper, Method 400: Determination of tearing resistance — Elmendorf method
AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics
AS 1301.215:2019 Methods of test for pulp paper, Method 215: Pulps — Laboratory wet disintegration — Disintegration of mechanical pulps at ≥ 85 °C
AS/NZS 4266.24:2004 Reconstituted wood-based panels - Methods of test - Resistance to cracking
AS 2542.2.5:1991 Sensory analysis of foods - Specific methods - 'A - not A' test
AS 1462.24:2003 Methods of test for plastics pipes and fittings - Determination of resistance to crack propagation - Test methods for slow crack growth in notched pipes (notch test)

VN-TCVN, a-cracking method

TCVN 2376-1987 Raw silk.Method for determination of breaking strength and breaking elongation
TCVN 7739-6-2007 Glass Fibers.Test Methods .Part 6: Determination of breaking force and breaking elonggation

Professional Standard - Textile, a-cracking method

FZ/T 50006-1994 Test method for breaking strength and breaking elongation of spandex yarn
FZ/T 01164-2022 Screening and pyrolysis-gas chromatography-mass spectrometry of phthalates in textiles
FZ/T 60019-1994 Test method for bursting strength of nonwoven fabrics

Professional Standard - Aviation, a-cracking method

HB 5279-1984 Test method for surface crack fracture toughness of sheet metal
HB 5487-1991 Test method for fracture toughness of aluminum alloy
HB 5442-1990 Test method for bonded crack growth force

Aerospace Industries Association/ANSI Aerospace Standards, a-cracking method

AIA/NAS NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
AIA/NAS NASM1312-10-2012 FASTENER TEST METHODS METHOD 10 STRESS RUPTURE (Rev 1)
AIA/NAS NASM1312-2010 FASTENER TEST METHODS METHOD 10 STRESS RUPTURE (Rev 1)

AIA/NAS - Aerospace Industries Association of America Inc., a-cracking method

NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
NASM1312-10-2012 FASTENER TEST METHODS METHOD 10 STRESS RUPTURE (Rev 1)
NASM1312-10-2017 FASTENER TEST METHODS METHOD 10 STRESS RUPTURE (Rev 2)

Aerospace Industries Association, a-cracking method

AIA NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture

农业农村部, a-cracking method

NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis

American Society of Mechanical Engineers (ASME), a-cracking method

ASME STP-PT-071-2014 STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS

Sichuan Provincial Standard of the People's Republic of China, a-cracking method

DB51/T 2149.4-2016 Test methods for raw bamboo fibers - Part 4: Test methods for breaking strength and elongation at break

BE-NBN, a-cracking method

NZ-SNZ, a-cracking method

AS/NZS 1635.5.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 5.1: Breaking Strength
AS/NZS 1635.7.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 7.1: Unwind Force

Indonesia Standards, a-cracking method

SNI 07-3688-1995 Method of U-groove weld cracking test
SNI 07-3689-1995 Method of Y-groove weld cracking test
SNI 06-4574-1998 Test method for cracking resistance and blowing strength of leather by lastometer
SNI 06-1117-1989 Test method for seam strength of leather
SNI 13-3616-1994 Golds and silver, Test method for solubility classification of gold and silver in ores by cyanide
SNI 2438-2015 Cara uji kelarutan aspal
SNI ISO 20872:2011 Footwear - Test methods for outsoles - Tear strength

Professional Standard - Petroleum, a-cracking method

SY/T 5289-2000 Evaluating method for hydraulic fracturing effect of oil well
SY/T 5107-2005 Recommended practices on measuring the properties of water-based fracturing fluid
SY/T 5107-2016 Performance evaluation method of water-based fracturing fluid
SY/T 5107-1995 Performance evaluation method of water-based fracturing fluid
SY/T 5117-1996 Rock pyrolysis analysis method
SY/T 6476-2013 Practice for drop-weight tear tests on steel line pipe
SY/T 6380-2008 Test methods of breaker properties for fracturing
SY/T 6476-2000 Drop-weight tear tests of steel pipe
SY/T 6380-1998 The test methods of breaker properties for fracturing
SY/T 6476-2007 Practice for drop-weight tear tests on steel line pipe
SY 6216-1996 Performance test method of crosslinking agent for fracturing
SY 6380-2008 Performance test method of gel breaker for fracturing
SY/T 6216-1996 Performance test method of crosslinking agent for fracturing
SY/T 5108-1997 Recommended practice for testing proppants used in hydraulic fracturing operations
SY/T 6215-1996 Performance test method of fluid loss control agent for fracturing

American National Standards Institute （ANSI), a-cracking method

ANSI/AWS D14.8M:2009 Standard Methods for the Avoidance of Cold Cracks
ANSI/ASTM E604:1983 Test Method for Dynamic Tear Testing of Metallic Materials
ANSI/ASTM E139:2000 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ANSI/NFPA PYR1128-2013 Standard Method of Fire Test for Flame Breaks
ANSI/ASA S3.5-1997 Methods for Calculation of the Speech Intelligibility Index

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, a-cracking method

GB/T 8363-2018 Steel—Drop-weight tear tests method
GB/T 32142-2015 Detection and identification of Euphorbia dentata Michx
GB/T 34252-2017 Test method for crazing resistance of domestic ceramic wares

Professional Standard-Ships, a-cracking method

CB 1120-1984 Test method for cracks in ring inserts
CB 1116-1984 Z-direction window type lamellar tear test method
CB/T 4364-2013 Weldability testing method of Y-groove cracking test

能源部, a-cracking method

SY 5289-1991 Oil well fracturing effect evaluation method

CZ-CSN, a-cracking method

CSN 62 1488-1982 Vulcanized rubber. Method of determination of resistance to flex cracking and to crack growth

RO-ASRO, a-cracking method

STAS 7272-1988 YARNS Determination of breaking load and elongation at breaking Single strand method
STAS 9760-1984 TESTINGS OF METALS Determination of breaking tenacity under plane breaking strain conditions K10 METHOD

Professional Standard - Building Materials, a-cracking method

JC/T 2234-2014 Test method for early cracking resistance of cement
JC/T 951-2005 Test method for cracking-resistance of cement mortar

Professional Standard - Machinery, a-cracking method

JB/T 12608-2016 Inspection methods for cutting tool surface micro-crack
JB/T 8189-1999 Testing method for crack initiation and propagation rate in steam turbine metals at elevates temperature

SAE - SAE International, a-cracking method

SAE J424-1986 METHOD FOR DETERMINING BREAKAGE ALLOWANCES FOR SHEET STEEL
SAE J424-1981 METHOD FOR DETERMINING BREAKAGE ALLOWANCES FOR SHEET STEEL

Society of Automotive Engineers (SAE), a-cracking method

SAE J424-1987 Method for Determining Breakage Allowances for Sheet Steel

International Organization for Standardization (ISO), a-cracking method

ISO 20064:2019 Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
ISO 8588:1987 Sensory analysis; Methodology; "A" - "not A" test
ISO 8588:2017 Sensory analysis - Methodology - "A" - "not A" test
ISO 9186:2001 Graphical symbols - Test methods for judged comprehensibility and for comprehension
ISO 20872:2001 Footwear - Test methods for outsoles - Tear strengh
ISO 20872:2018 Footwear - Test methods for outsoles - Tear strength
ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ISO 27306:2016 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

Inner Mongolia Provincial Standard of the People's Republic of China, a-cracking method

DB15/T 539-2013 Quarantine identification method of ragweed trifida

ACI - American Concrete Institute, a-cracking method

ACI SP-286 CD-2012 A Fracture Approach for FRP-Concrete Structures

Military Standard of the People's Republic of China-General Armament Department, a-cracking method

GJB 715.29-1990 Fastener Test Methods Stress Fracture
GJB 1483-1992 Kie test method for surface crack fracture toughness of ultra-high strength steel plates
GJB 7368-2011 Measurement of spall strength of metallic materials

PH-BPS, a-cracking method

PNS ISO 8588:2021 Sensory analysis - Methodology - “A” - “not A” test
PTS 154-1972 Method of Test for Determining the Bursting Strength of Paper

Taiwan Provincial Standard of the People's Republic of China, a-cracking method

CNS 2744-1989 Method of Disassembly Inspection for Automobiles

ES-AENOR, a-cracking method

UNE 87-016-1986

European Committee for Standardization (CEN), a-cracking method

EN ISO 10734:2016 Footwear - Test method for slide fasteners - Strength of slide fastener pullers
CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
EN 12771:1999 Footwear - Test Methods for Outsoles - Tear Strength
EN 12773:1999 Footwear - Test Methods for Outsoles - Needle Tear Strength
EN 12774:1999 Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance

SE-SIS, a-cracking method

SIS PR 20 04 03

Professional Standard - Commodity Inspection, a-cracking method

SN/T 3440-2012 Detection and identification of tobacco rattle virus

Professional Standard - Light Industry, a-cracking method

QB/T 4550-2013 Footwear.Test method for slide fasteners.Burst strength
QB/T 4253-2011 Test method for crazing resistance of domestic ceramic ware
QB/T 1130-1991 Test method for right-angle tear properties of plastics

International Federation of Trucks and Engines, a-cracking method

NAVISTAR TMS 9559-2010 Adhesive Tear Down and Separation Testing Methods

BELST, a-cracking method

STB 2162-2011 Oil pipeline pipes. Testing method by internal pressure to fracture

German Institute for Standardization, a-cracking method

DIN EN ISO 10717:2011-03 Footwear - Test methods for slide fasteners - Burst strength (ISO 10717:2010); German version EN ISO 10717:2010
DIN EN 12774:2000-04 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance; German version EN 12774:1999 / Note: To be replaced by DIN EN ISO 20875 (2016-01).
DIN EN 12771:2000 Footwear - Test methods for outsoles - Tear strength; German version EN 12771:1999
DIN EN 12773:2000-01 Footwear - Test methods for outsoles - Needle tear strength; German version EN 12773:1999 / Note: To be replaced by DIN EN ISO 20874 (2016-01).

Hainan Provincial Standard of the People's Republic of China, a-cracking method

DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

KR-KS, a-cracking method

KS M ISO 15850-2017 Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
KS K ISO 13938-2-2022 Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
KS M ISO 20872-2020 Footwear — Test methods for outsoles — Tear strength
KS M ISO 20876-2020 Footwear — Test methods for insoles — Resistance to stitch tear
KS M ISO 20875-2020 Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance
KS M ISO 6383-1-2016 Plastics - Film and sheeting - Determination of tear resistance - Part 1 : Trouser tear method

Professional Standard - Water Conservancy, a-cracking method

SL 144.8-2008 Calibration method of microwave heating system

Professional Standard - Ferrous Metallurgy, a-cracking method

YB/T 5160-1993 Test method for electrolysis of cathode carbon blocks for aluminum electrolytic cells

Professional Standard - Electron, a-cracking method

SJ 20401-1994 Methods of measurement for isolated slot of planar waveguide-fed slot arrays
SJ/T 11097-1996 Test method for cracked antenna pattern of marine navigation radar

Danish Standards Foundation, a-cracking method

DS/EN ISO 10717:2011 Footwear - Test method for slide fasteners - Burst strength
DS/EN 12771:2000 Footwear - Test methods for outsoles - Tear strength

Lithuanian Standards Office , a-cracking method

LST EN 12771-2002 Footwear - Test methods for outsoles - Tear strength
LST ISO 8588:2003 Sensory analysis. Methodology. "A" - "not A" test (idt ISO 8588:1987)

AENOR, a-cracking method

UNE-EN 12771:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH
UNE-EN 12782:2000 FOOTWEAR - TEST METHODS FOR INSOLES - RESISTANCE TO STITCH TEAR

PL-PKN, a-cracking method

PN E04160 ArkusZ20-1973 Elec?ric cables Me?hods ot ?es?ing Determination ot tear strenght

GM Daewoo, a-cracking method

GMKOREA EDS-T-7945-2011

Professional Standard - Railway, a-cracking method

TB/T 2985-2000 Dynamic tear test method for metallic materials

海关总署, a-cracking method

SN/T 3559-2021 Rift Valley Fever Virus Detection Methods at Border Ports

National Aeronautics and Space Administration (NASA), a-cracking method

NASA NACA-TN-925-1944 A least-squares procedure for the solution of the lifting-line integral equation

Hubei Provincial Standard of the People's Republic of China, a-cracking method

DB42/T 464-2008 The Testing method of breaking strength and breaking elongation of Polymer fibres used in construction

Professional Standard - Aerospace, a-cracking method

QJ 2100-1991 Test method for breaking strength and elongation at break of carbon fiber cloth for special industrial use

U.S. Air Force, a-cracking method

AIR FORCE A-A-59577 VALID NOTICE 1-2009 Tester, Flash Point ASTM D93 Method A and B

Professional Standard - Chemical Industry, a-cracking method

HG/T 5316～5319-2018 Test method for activity of ammonia cracking hydrogen production catalyst, analysis method for chemical composition of sweetening catalyst at room temperature, sulfur capacity test and chemical composition analysis method for manganese oxide desulfurizati

未注明发布机构, a-cracking method

BS 7448-4:1997(2001) Fracture mechanics toughness tests — Part 4 : Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials