ZH
RU
ES

curve deviation

curve deviation, Total:356 items.

In the international standard classification, curve deviation involves: Glass, Gears, Shipbuilding and marine structures in general, Linear and angular measurements, Measurement of volume, mass, density, viscosity, Construction technology, Ceramics, Technical drawings, Testing of metals, Construction industry, Metalliferous minerals, Ferrous metals, Non-metalliferous minerals, Bottles. Pots. Jars, Chipless working equipment, Fibre optic communications, Farm buildings, structures and installations, Integrated circuits. Microelectronics, Products of non-ferrous metals, Fasteners for aerospace construction, Hand-held tools, Rubber, Coals, Fuels, Domestic, commercial and industrial heating appliances, Raw materials for rubber and plastics, Electrical wires and cables, Equipment for the chemical industry, Fasteners, Optical equipment, Construction materials, Flexible drives and transmissions, Graphical symbols, Ferroalloys, Products of the textile industry, Metrology and measurement in general, Occupational safety. Industrial hygiene, Plastics, Iron and steel products, Components for aerospace construction, Packaging and distribution of goods in general, Test conditions and procedures in general, Non-ferrous metals, Optics and optical measurements, Quality, Water quality, Sports equipment and facilities, Railway engineering in general, Waxes, bituminous materials and other petroleum products, Thermodynamics and temperature measurements, Electricity. Magnetism. Electrical and magnetic measurements, Vocabularies, Petroleum products in general, Electrical equipment for working in special conditions, Mining and quarrying, Rubber and plastics products, Electronic tubes.

CU-NC, curve deviation

NC 02-06-1968 Representation of linear and angular desviations
NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification

IT-UNI, curve deviation

UNI 4630-1970
UNI 472-1970
UNI 470-1970
UNI 471-1970
UNI 3976-1989
UNI 8104-P2-1980
UNI 3141-1966
UNI 688-692-1942
UNI 6016-1967
UNI 4725-1977
UNI 6623-1977
UNI 7836-1978 Metropolitan railways. Rail lay-out geometry. Planimetrical and altimetrical itinerary and tolerances of construction.

Professional Standard - Aviation, curve deviation

HB 7-1-1968 error curve clamp
HB 20081-2012 Test method for optical angular deviation of transparent parts
HB 20081-2012/0490 Test method for optical angular deviation of transparent parts
HB 5261-1983 KR curve test method for sheet metal

Professional Standard - Building Materials, curve deviation

JC/T 2658-2022 Laser scanning method for measuring three-dimensional shape deviation of curved glass

CZ-CSN, curve deviation

CSN 01 4421-1982 Measuring of deviations of straightness
CSN 01 4423-1987 Methods of measurement of roundness deviations
CSN 01 4431-1987 Methods of mcasuremcnl of parallclism devialoris
CSN 01 3136-1981 Technioal drawings. Inscription of linear and angular tolerances
CSN 73 0250-1985 Accuracy of geometrical parameters in building industry. Marking out, erection deviations.
CSN 21 0389-1984 Forming machines. Eccentric and crank presses with operating force below 5000 kn. Testing methods
CSN 58 8775-1994 Methods of test for fats and oils Determination of cooling curve

CH-SNV, curve deviation

Association Francaise de Normalisation, curve deviation

NF EN ISO 13015:2013 Étoffes tissées - Déformation - Détermination de l'écart angulaire et du cintrage
NF X08-014:1983 COLOUR. COLOUR DIFFERENCES AND TOLERANCES. COLOUR DIFFERENCE FORMULA CIE LUV AND CIE LAB.
NF E10-108:2000 Dimensional measuring methods - Part 9 : positioning deviation.
NF H35-077:1977 Bottling industry - Glass bottle - Dimensional relationships and tolerances.
NF E02-100-1*NF EN ISO 286-1:2010 Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits.
NF E10-104:1989 Dimensional measuring methods. Part 5 : cylindrical deviation.
NF E10-106:1990 Dimensional measuring methods. Part 7 : parallelisme deviation.
NF EN ISO 286-1:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 1 : bases des tolérances, écarts et ajustements
NF M01-013-8*NF ISO 13909-8:2005 Hard coal and coke - Mechanical sampling - Part 8 : methods of testing for bias
NF ISO 13909-8:2005 Houille et coke - Échantillonnage mécanique - Partie 8 : méthodes de détection du biais
NF EN 29885:1994 Récipients en verre à col large - Déviation de planéité de la surface d'étanchéité supérieure - Méthodes d'essai
NF L10-060*NF EN 3848:2002 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF H35-007*NF EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods.
NF L52-250-803*NF EN 3475-803:2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803 : capacitance variation
NF EN ISO 13736/A1:2022 Détermination du point d'éclair - Méthode Abel en vase clos - Amendement 1 : révision de l'énoncé de biais
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.

German Institute for Standardization, curve deviation

DIN 3962-2:1978 Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations
DIN 3965-4:1986 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN 9003-5:1986-12 Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values / Note: To be replaced by DIN EN 3071 (1997-09).
DIN 9003-5:1986 Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values
DIN 21772:2012 Gears - Cylindrical involute gears and gear pairs - Definition of deviations
DIN 59783:1974 Hexagonal wire of wrought nickel and nickel alloys, drawn; dimensions, tolerances
DIN EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008
DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN V 46454-3:2006 Zero defect winding wires - Part 3: Solderable electrically polyurethane enamelled round copper wire, class 180
DIN 28030-2:2013 Flange joints for process vessels - Part 2: Limit deviations for flanges
DIN 28030-2:2013-09 Flange joints for process vessels - Part 2: Limit deviations for flanges
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN EN 3848:2003-03 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations; German and English version EN 3848:2001
DIN 41755-1:1970-01 Denomination of the ripple of d.c voltage, periodic deviations; terms and measuring methods
DIN EN 29885:1994 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
DIN EN ISO 286-1:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013); German version EN ISO 286-1:2010 + AC:2013
DIN 41755-1:1970 Denomination of the ripple of d.c voltage, periodic deviations; terms and measuring methods
DIN EN 3848:2003 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations; German and English version EN 3848:2001
DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections

British Standards Institution (BSI), curve deviation

BS EN 12479:2002 Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations
BS EN ISO 6284:1999 Construction drawings - Indication of limit deviations
BS EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Basis of tolerances, deviations and fits
BS ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
BS EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
BS ISO 13909-8:2002 Hard coal and coke - Mechanical sampling - Methods of testing for bias
BS 6740:1987 Method for determining departures from roundness by measuring variations in radius
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 13292:2008 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling
BS ISO 13292:2006 Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 21395-1:2020 Optics and photonics. Test method for refractive index of optical glasses - Minimum deviation method
BS EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
BS 5662-3:1987 Evaluation of sampling methods for iron ores - Experimental methods for checking the bias of sampling
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

European Committee for Standardization (CEN), curve deviation

EN 12479:2001 Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations
EN ISO 6284:1999 Construction Drawings - Indication of Limit Deviations ISO 6284:1996
EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
prEN 224-1986 Methods of testing doors; measurement of deviations from local flatness in door leaves
EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations

Professional Standard - Pharmaceutical Packaging, curve deviation

YBB 0019-2003 Chuizhizhoupiancha Cedingfa Tests for vertical axis deviation of bottles
YBB 0019(03)-2003 Vertical axis deviation measurement method (trial)

Professional Standard-Ships, curve deviation

CBM 1003-1981 Flange size tolerance

YU-JUS, curve deviation

JUS B.D8.401-1998 Ceramic sewer pipes - Test methods and reauirements - Deviation from straightness
JUS N.N6.325-1983 Radiocommunications. Transmitters. Table of transmitter frequency tolerances.
JUS B.G8.057-1982 MethcxJs of analysis of iron ore. Experimental methodsfor checking the bias ofsampling

Association of German Mechanical Engineers, curve deviation

VDI/VDE 2631 Blatt 6-2005 Form measurement - Determination of the straightness deviation of the linear guide
VDI/VDE 2631 Blatt 6-2016 Form measurement - Determination of the straightness deviation of the linear guide

U.S. Military Regulations and Norms, curve deviation

ARMY MIL-C-48471 B (2)-1998 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B NOTICE 4-1997 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B REINST NOTICE 3-1996 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B VALID NOTICE 1-1987 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE
ARMY MIL-C-48471 B-1981 CIRCUIT CARD ASSEMBLY: 11732354 LEAD, WINDAGE AND REFERENCE

PL-PKN, curve deviation

PN S83200-1968 Threads for valves of air tubes Dimensions and limiting deviations
PN O79716-1991 Glass bottles. Vertical axis deviation. Test method
PN C89025-1990 Plastics Determination of temperatur? of deflection by Martens method

Danish Standards Foundation, curve deviation

DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
DS/EN ISO 286-1/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
DS/EN ISO 286-1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
DS/INF 28:1984 Geometricai tolerances — Verification principles and methods for tolerances of form, orientation, location and runout — Guidelines
DS/EN 10024:1996 Hot rolled taper flange I sections - Tolerances on shape and dimensions
DS/EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form diviations
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/ISO 9885:1994 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods
DS 1103-7:1988 Test methods for rigid flat sheets - Determination of dimensions, angular and form deviation
DS/EN 29885:1994 Wide-mouth glass containers-Deviation from flatness of top sealing surface-Test methods

ESDU - Engineering Sciences Data Unit, curve deviation

AERO C.01.01.04 A-1980 Effect of gap on the slope of lift curve and slope of lift increment curve due to control surface deflection.

AT-ON, curve deviation

ONORM M 6771-1995 Deviations of centre distance and parallelism tolerances for axes of cases for cylindrical gears
ONORM ISO 4292:1988 Methodsfor the assessment ofdeparture from roundness; measurement by two- and three-point methods
ONORM ISO 4291:1988 Methods for the assessment of departure from roundness; measurement of variations in radius
ONORM M 3215 Teil.1-1974 Broad strip steel; hot rolled mild steel coils; dimensions and masses; permissible deviations
ONORM M 6720 TeiL.3-1990 Cylindrical gears and cylindrical gear drives with involute shaped tooth profile; terms, defirittions and destinating dimensions; deviations, tolerances and errors

International Organization for Standardization (ISO), curve deviation

ISO 4463:1979 Measurement methods for building — Setting out and measurement — Permissible measuring deviations
ISO 3443-4:1986 Tolerances for building; Part 4 : Method for predicting deviations of assemblies and for allocation of tolerances
ISO 3086:2006 Iron ores - Experimental methods for checking the bias of sampling
ISO 3086:1986 Iron ores; Experimental methods for checking the bias of sampling
ISO 9497:1993 Flourspar; experimental methodes for evaluation of quality variation
ISO 10226:1991 Aluminium ores; experimental methods for checking the bias of sampling
ISO 4292:1985 Methods for the assessment of departure from roundness; Measurement by two- and three-point methods
ISO 4291:1985 Methods for the assessement of departure from roundness; Measurement of variations in radius
ISO 3086:1974 Iron ores — Experimental methods for checking the bias of sampling
ISO 9498:1993 Fluorspar; experimental methods for checking the bias of sampling and sample preparation
ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
ISO 13292:2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling
ISO/DIS 13909-8:1976 Coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
ISO 7347:1987 Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation
ISO 13909-8:2001 Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
ISO 13909-8:2016 Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
ISO 9885:1991 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 12745:1996 Copper, lead and zinc ores and concentrates - Precision and bias of mass measurement techniques
ISO 8541:1986 Manganese and chromium ores; Experimental methods for checking the bias of sampling and sample preparation
ISO 13736:2021/Amd 1:2022 Determination of flash point — Abel closed-cup method — Amendment 1: Bias statement update
ISO 7087:1984 Ferroalloys; Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 3841:1977 Petroleum waxes; Determination of melting point (cooling curve)
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, curve deviation

GB/T 2837-1998 Measuring method for size and deviation of vitrified clay pipe
GB/T 25946-2010 Aluminium ores.Experimental methods for checking the bias of sampling
GB/T 32554-2016 Fluorspar.Experimental methods for checking the bias of sampling and sample preparation
GB/T 8452-2008 Test method for verticality of glass bottles
GB/T 10322.4-2000 Iron ores-Experimental methods for checking the bias of sampling
GB/T 10322.4-2014 Iron ores.Experimental methods for checking the bias of sampling
GB/T 7287.8-1987 Measuring method for power deviation rate of infrared heater
GB/T 15338-2008 Standard guide for carbon black.Validation of test method precision and bias
GB/T 15338-2012 Carbon black.Validation of test method precision and bias
GB/T 15338-1994 Standard guide for carbon black--Validation of test method precision and bias
GB/T 8452-1987 Glass containers--Vertical axis deviation of bottles test methods
GB/T 2831-1981 Surface form deviation of optical elements--Inspection methods
GB/T 18249-2000 Ferroalloys-Experimental methods for checking the bias of sampling and sample preparation
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 30083-2013 Copper, lead and zinc ores and concentrates.Precision and bias of mass measurement techniques
GB/T 2539-1981 Paraffins--Determination of melting point(cooling curve)
GB/T 24232-2009 Manganese and chromium ores.Experimental methods for checking the bias of sampling and sample preparation
GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 17531-1998 Rubber and rubber products--Determination of accuracy and bias of chemical test methods
GB 9585-1988 Nomenclature of Electrostatic Deflection Electrodes of Cathode Ray Tubes

RO-ASRO, curve deviation

STAS 7394-1966
STAS SR ISO 3086:1995 Iron ores. Experimental methods for checking the bias sampting

NL-NEN, curve deviation

NEN 2887-1990 Maximum permissible dimensional deviations for setting-out on the building site
NEN 2140-1988 Shipbuilding Permissible deviations when scribing, working up materials and compiling shipstructures

Korean Agency for Technology and Standards (KATS), curve deviation

KS B ISO 286-1:2009 ISO system of limits and fits-Part 1:Bases of tolerances, deviations and fits
KS B ISO 286-1:2016 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS E ISO 3086:2010 Iron ores-Experimental methods for checking the bias of sampling
KS B ISO 4292:2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS B ISO 4292:2004 Methods for the assessment of departure from roundness-Measurement by two-and three-point methods
KS B ISO 4291:2004 Methods for the assessment of departure from roundness-Measurement of variations in radius
KS C 6986-2004 Evaluation method of geometrical deviation onfibre optic connector interfaces
KS E ISO 10226:2003 Aluminium ores-Experimental methods for checking the bias of sampling
KS B ISO 4291:2014 Methods for the assessement of depature from roundness — Measurement of variations in radius
KS E ISO 10226-2003(2017) Aluminium ores－Experimental methods for checking the bias of sampling
KS E ISO 3086-2010(2020) Iron ores－Experimental methods for checking the bias of sampling
KS E ISO 10226-2003(2022) Aluminium ores－Experimental methods for checking the bias of sampling
KS D 0228-2008 Product analysis and its tolerance for wrought steel
KS C 6986-2014 Evaluation method of geometrical deviation on fibre optic connector interfaces
KS B ISO 286-1:2014 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS C 6986-2014(2019) Evaluation method of geometrical deviation on fibre optic connector interfaces
KS D ISO 7347-2003(2018) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-1-2016(2021) Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS K 0605-2012 Test method for bow and skewness of woven and knitted fabrics
KS E ISO 13292-2008(2018) Copper, lead, zinc and nickel concentrates－Experimental methods for checking the bias of sampling
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS D ISO 7347:2003 Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS E ISO 13909-8-2005(2020) Hard coal and coke－Mechanical sampling－Part 8：Methods of testing for bias
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS E ISO 13292:2008 Copper, lead, zinc and nickel concentrates－Experimental methods for checking the bias of sampling
KS K 0545-2001 Testing methods for crimp of yarn in fabrics : Dead load
KS K 0545-1974 Testing methods for crimp of yarn in fabrics : Dead load
KS E ISO 8542-2003(2019)
KS C 6913-1995 Test methods of optical isolators for light beam transmission

American Gear Manufacturers Association, curve deviation

AGMA 09FTM05-2009 Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets

FI-SFS, curve deviation

RU-GOST R, curve deviation

GOST 26877-1991 Metal products. Methods of measuring from variatons
GOST 26877-2008 Metal products. Methods of measuring form variations
GOST 8.506-1984 State system for ensuring the uniformity of measurements. Convex spherical mirrors. Measurement technique of curvature radius and local departures of surfaces forms from sphericity by holographic shear interferometry
GOST 30893.1-2002 Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 23542-1979 Cables and wire bundles for device connections. Series of length limit deviations
GOST 1759.1-1982 Bolts, screws, studs and nuts. Tolerances. Control methods of dimensions and deviations of form and surface position
GOST 15634.3-1970 Magnet wire. Method of the bending test
GOST R EN 824-2008 Thermal insulating products for building applications. Methods for measurement of deviation from squareness
GOST 592-1981 Chain wheels for plate link chains. Methods of calculation and construction of teeth profile. Tolerances
GOST 2.308-1979 Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST EN 824-2011 Thermal insulating products for building applications. Method for determination of deviation from squareness
GOST 8.420-2002 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation
GOST 8.420-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring straightness and flatness deviation
GOST R EN 825-2008 Thermal insulating products for building applications. Methods for measurement of deviation from flatness
GOST EN 825-2011 Thermal insulating products for building applications. Methods for determination urement of deviation from flatness
GOST 25347-2013 Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 25346-2013 Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
GOST 24980-2005 Glass containers. Methods of testing the parameters
GOST ISO 13909-8-2013 Hard coal and coke. Mechanical sampling. Part 8. Methods of testing for bias
GOST 24980-1992 Glass containers. Method of determination parameters
GOST 24980-1981 Glass containers. Method of determination of size, mass, capacity and shape deviation
GOST 10641-1988 Woven textile fabrics and piece-goods. Permissible deviations from surface density and number of yarns per 10 centimetres
GOST R 55147-2012 Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Part 2. Tolerance classes, limit deviations for holes and shafts
GOST 30975-2002 Ferroalloys. Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
GOST R 55146-2012 Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. Part 1. General provisions, tolerances, deviations and fits
GOST 1579-1993 Wire. Bend test method

未注明发布机构, curve deviation

BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling
BS EN ISO 286-1:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 1 : Basis of tolerances, deviations and fits
BS ISO 13292:2006(2008) Copper, lead, zinc and nickel concentrates — Experimental methods for checking the bias of sampling
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Japanese Industrial Standards Committee (JISC), curve deviation

JIS M 8709:2006 Iron ores -- Experimental methods for checking the bias of sampling
JIS B 0401-1:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
JIS K 7207:1995 Testing method for deflection temperature of rigid plastics under load
JIS B 7071-1:2015 Measuring method for refractive index of optical glass -- Part 1: Minimum deviation method
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS A 1509-2:2008 Test methods for ceramic tiles -- Part 2: Determination of surface quality, dimensions and crook, warp and rectangularity, shape and height of back feet, and angle for trim tiles
JIS K 7191-1:2007 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
JIS K 7191-1:2015 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method

BE-NBN, curve deviation

NBN-ISO 3443-4:1992 Tolerances for building - Part 4 : Method (or predicting deviations of assemblies and for allocation of tolerances

VN-TCVN, curve deviation

TCVN 6805-2001 Aluminium ores.Experimental methods for checking the bias of sampling
TCVN 5121-1990 Deviations from true forms and disposition of surfaces.General requirements for measuring methods

Taiwan Provincial Standard of the People's Republic of China, curve deviation

CNS 14704-2002 Precision and Bias Statements for Test Methods for Construction Materials
CNS 9815-1983 Method of Test for Wires Breakage of Appliance

Shaanxi Provincial Standard of the People's Republic of China, curve deviation

DB6111/T 185-2022 Calculation Method of Flow Deviation in Greenhouse Drip Irrigation Project

Standard Association of Australia （SAA）, curve deviation

AS 2806.6:2003(R2013)
AS 2862.3:2008 Copper, lead, zinc and nickel concentrates - Sampling - Experimental methods for checking the bias of sampling

未注明发布机构, curve deviation

BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS ISO 3086:2006(2010) Iron ores — Experimental methods for checking the bias of sampling
JIS M 8709:2023 Iron ores -- Experimental methods for checking the bias of sampling
BS EN ISO 286-1:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 1 : Basis of tolerances, deviations and fits
BS ISO 13292:2006(2008) Copper, lead, zinc and nickel concentrates — Experimental methods for checking the bias of sampling
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Defense Logistics Agency, curve deviation

DLA SMD-5962-82036 REV E-2006 MICROCIRCUIT, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON

BR-ABNT, curve deviation

ABNT P-NB-112

United States Navy, curve deviation

NAVY MIL-I-22444 C NOTICE 2-2000 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
NAVY MIL-I-22444 C VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
NAVY MIL-I-22444 C-1968 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD

AENOR, curve deviation

UNE 82320:1995 METHODS FOR THE ASSESSMENT OF DEPARTURE FROM ROUNDNESS. MEASUREMENT OF VARIATIONS IN RADIUS.
UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

Professional Standard - Agriculture, curve deviation

GB 8452-1987 Glass containers - test methods for vertical axis deviation of glass bottles

AASHTO - American Association of State Highway and Transportation Officials, curve deviation

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method

KR-KS, curve deviation

KS B ISO 286-1-2016 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
KS K 0605-2017(2022) Test method for bow and skewness of woven and knitted fabrics
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS D ISO 7347-2003(2023) Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation
KS E ISO 8541-2018(2023) Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation

国家市场监督管理总局、中国国家标准化管理委员会, curve deviation

GB/T 1800.1-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits
GB/T 37854-2019 Wide-mouth glass containers—Deviation from flatness of top sealing surface—Test methods
GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

SE-SIS, curve deviation

SIS SS-ISO 4463:1983 Measurement methods for building - Setting out and measurement - Permis- sible measuring deviations

Group Standards of the People's Republic of China, curve deviation

T/CAQI 55-2018 Test method of coal sample moisture deviation in mechanical sampling system
T/MBJX 001-2018 Measurement method for the deflected angle of magnetization of permanent magnet use Helmholtz coils

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, curve deviation

PREN 3848-1994 Aerospace Series Semi-Finished Metallic Products Method of Measuring for from Deviations (Edition P1)
PREN 3848-1996 Aerospace Series Semi-Finished Metallic Products Methods of Measuring from Deviations (Edition P2)

TIA - Telecommunications Industry Association, curve deviation

TIA/EIA-455-44B-1992 FOTP-44 Refractive Index Profile@ Refracted Ray Method

American Society for Testing and Materials (ASTM), curve deviation

ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E177-14 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D3670-91(2022) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D3670-91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D3670-91(1996)e1 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2007) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D2777-08 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D2777-98 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM F2469-10 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM B754-89(1999)e1 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM B754-10(2015)e1 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

Lithuanian Standards Office , curve deviation

LST EN 10024-2000 Hot rolled taper flange I sections - Tolerances on shape and dimensions
LST EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
LST EN 3848-2002 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

ZA-SANS, curve deviation

SANS 13909-8:2001 Hard coal and coke - Mechanical sampling Part 8: Methods of testing for bias

ES-UNE, curve deviation

UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
UNE-EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations. (Endorsed by AENOR in December of 2001.)
UNE-EN ISO 13736:2021/A1:2023 Determination of flash point - Abel closed-cup method - Amendment 1: Bias statement update (ISO 13736:2021/Amd 1:2022)
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

International Telecommunication Union (ITU), curve deviation

ITU-R SM.1268-3-2014 Method of measuring the maximum frequency deviation of FM broadcast emissions at monitoring stations
ITU-R SM.1268-1 SPANISH-1999 METHOD OF MEASURING THE MAXIMUM FREQUENCY DEVIATION OF FM BROADCAST EMISSIONS AT MONITORING STATIONS M蒚ODO DE MEDICI覰 DE LA M罼IMA DESVIACI覰 DE FRECUENCIA DE LAS EMISIONES DE RADIODIFUSI覰 A UTILIZAR EN LAS ESTACIONES DE COMPROBACI覰 T蒀NICA

The American Road & Transportation Builders Association, curve deviation

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method

Professional Standard - Password Professional Standards, curve deviation

GM/T 0003-2012 SM2 Elliptic Curve Public Key Cryptography Algorithm

Aerospace, Security and Defence Industries Association of Europe (ASD), curve deviation

ASD-STAN PREN 3848-1996 Aerospace Series Semi-Finished Metallic Products Methods of Measuring from Deviations (Edition P2)

Professional Standard - Electron, curve deviation

SJ/T 10985-1996 Methods for designation of electrostatic deflecting electrodes of cathode-ray tubes

American Welding Society (AWS), curve deviation

WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels