ZH
RU
ES

standard curve method

standard curve method, Total:500 items.

In the international standard classification, standard curve method involves: Testing of metals, Sports equipment and facilities, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Products of the textile industry, Raw materials for rubber and plastics, Noise with respect to human beings, Machine tools, Semiconducting materials, Petroleum products in general, Iron and steel products, Electrical wires and cables, Road engineering, Construction materials, Paper products, Springs, Electrical accessories, Rubber and plastics products, Packaging materials and accessories, Adhesives, Paint coating processes, Hydraulic fluids, Optics and optical measurements, Non-textile floor coverings, Wood-based panels, Plastics, Road vehicles in general, Refractories, Reinforced plastics, Paints and varnishes, Elements of buildings, Textile fibres, Earth-moving machinery, Construction industry, Insulating materials, Nuclear energy engineering, Photography, Surface treatment and coating, Medical equipment, Cellular materials, Welding, brazing and soldering, Electrical equipment for working in special conditions, Measurement of volume, mass, density, viscosity, Products of the chemical industry, Leather technology, Fasteners, Ceramics, Equipment for the metallurgical industry, Electrical and electronic testing, Extraction and processing of petroleum and natural gas, Electronic components in general, Rubber, Glass, Corrosion of metals, Magnetic materials, Semiconductor devices, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Linear and angular measurements, Power transmission and distribution networks, Products of non-ferrous metals, Mechanical testing, Paper and board, Internal combustion engines, Analytical chemistry, Tyres, Electronic tubes, Character sets and information coding.

AASHTO - American Association of State Highway and Transportation Officials, standard curve method

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
T 321-2003 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending

The American Road & Transportation Builders Association, standard curve method

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

American Society for Testing and Materials (ASTM), standard curve method

ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F415-87(2005) Standard Test Method for Curl in Carbon Paper
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM F415-87(2000)e1 Standard Test Method for Curl in Carbon Paper
ASTM F415-87(2010) Standard Test Method for Curl in Carbon Paper
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM F1304-08 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00e1 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-03 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00(2006) Standard Test Methods for Structural Panels in Flexure
ASTM F1304-90(1994)e1 Standard Test Method for Deflection of Resilient Floor Tile
ASTM F1304-01 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-18 Standard Test Method for Deflection of Resilient Floor Tile
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM F556-88(2011) Standard Test Method for Curl of Carbonless Copy Papers
ASTM C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C480-99(2005) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C480-99 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM F556-88(2001) Standard Test Method for Curl of Carbonless Copy Papers
ASTM F556-88(1996)e1 Standard Test Method for Curl of Carbonless Copy Papers
ASTM C480/C480M-08 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C393-00 Standard Test Method for Flexural Properties of Sandwich Constructions
ASTM F556-88(2006) Standard Test Method for Curl of Carbonless Copy Papers
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM F1304-08(2013) Standard Test Method for Deflection of Resilient Floor Tile
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D3937-12 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM C480/C480M-08(2015) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C480/C480M-16 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM D3885-02 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D2097-03(2005) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
ASTM D2097-03 Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2010) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM D4825-97(2002) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F1575-17 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D3111-99 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3111-10(2018) Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D2256/D2256M-09 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D7249/D7249M-12 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-12e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM E2007-00(2006) Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method)
ASTM E2007-00 Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method)
ASTM D2433-07 Standard Test Methods for Rubber Thread
ASTM D204-02 Standard Test Methods for Sewing Threads
ASTM D204-97 Standard Test Methods for Sewing Threads
ASTM D204-02(2010)e1 Standard Test Methods for Sewing Threads
ASTM D2433-93(2002) Standard Test Methods for Rubber Thread
ASTM D204-02(2021) Standard Test Methods for Sewing Threads
ASTM D204-02(2016) Standard Test Methods for Sewing Threads
ASTM F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM E518-00a Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D3937-07 Standard Test Method for Crimp Frequency of manufactured Staple Fibers
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM F1874-98(2004) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F1874-98 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F392/F392M-11 Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM F384-06(2011) Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C120/C120M-15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM C1025-15 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D2256-02 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D2256-97 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D1907-07 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1907-01 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907-97 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12(2018) Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C393/C393M-11 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393/C393M-11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D7249/D7249M-18 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D3768-11 Standard Test Method for Microcellular Urethanesmdash;Flexural Recovery
ASTM D6515-00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM D2258-99(2005) Standard Practice for Sampling Yarn for Testing
ASTM D2258-99 Standard Practice for Sampling Yarn for Testing
ASTM D6195-22 Standard Test Methods for Loop Tack
ASTM D2259-02(2011) Standard Test Method for Shrinkage of Yarns
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM D3929-03 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6717-07(2018) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D522-93a(2001) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM C393/C393M-06 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F3260-17 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D522-93a Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97(2002) Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM C393/C393M-20 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery
ASTM D522/D522M-13 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D3032-04 Standard Test Methods for Hookup Wire Insulation
ASTM D2969-04 Standard Test Methods for Steel Tire Cords
ASTM D2259-96 Standard Test Method for Shrinkage of Yarns
ASTM D6569-00 Standard Test Method for On-Line Measurement of pH¹
ASTM D6569-05 Standard Test Method for On-Line Measurement of pH¹
ASTM D2259-02(2006)e1 Standard Test Method for Shrinkage of Yarns
ASTM D2259-02 Standard Test Method for Shrinkage of Yarns
ASTM D2259-21 Standard Test Method for Shrinkage of Yarns
ASTM D3823-94 Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM D3823-01 Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM A1061/A1061M-09 Standard Test Methods for Testing Multi-Wire Steel Strand
ASTM D2969-04(2010) Standard Test Methods for Steel Tire Cords
ASTM D3032-10 Standard Test Methods for Hookup Wire Insulation
ASTM D3032-21 Standard Test Methods for Hookup Wire Insulation
ASTM D2259-02(2016)e1 Standard Test Method for Shrinkage of Yarns
ASTM D3823-07(2018) Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM D3032-16 Standard Test Methods for Hookup Wire Insulation
ASTM D3032-21a Standard Test Methods for Hookup Wire Insulation
ASTM D2259-02(2016) Standard Test Method for Shrinkage of Yarns
ASTM D3412-01 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412-95 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412/D3412M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Yarn

Association Francaise de Normalisation, standard curve method

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF T51-117-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3 : flexural vibration - Resonance-curve method

International Organization for Standardization (ISO), standard curve method

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO 3841:1977 Petroleum waxes; Determination of melting point (cooling curve)
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

British Standards Institution (BSI), standard curve method

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS 4695:1980 Method for determination of melting point of petroleum wax (cooling curve)
BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
BS EN ISO 6721-3:1996 Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN ISO 6721-3:2021 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method

RU-GOST R, standard curve method

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST 15634.3-1970 Magnet wire. Method of the bending test
GOST 1579-1993 Wire. Bend test method
GOST 20398.3-1974 Field-effect transistors. Forward transconductance measurement technique
GOST 12182.3-1980 Cables, wires and cords. Methods of control of bending resistance with twisting
GOST R 56803-2015 Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method

Korean Agency for Technology and Standards (KATS), standard curve method

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS K 0546-2017 Test method for crimp in yarns from fabrics：Load-elongation method
KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
KS K 0546-2022 Test method for crimp in yarns from fabrics: Load-elongation method
KS K 0545-2001 Testing methods for crimp of yarn in fabrics : Dead load
KS K 0545-1974 Testing methods for crimp of yarn in fabrics : Dead load
KS M 2740-1-2005 Petroleum waxes－Determination of melting point(cooling curve)
KS F 2566-2014(2019) Standard test method for flexural performance of fiber reinforced concrete
KS K 0545-2003 Testing methods for crimp of yarn in fabrics : Dead load
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2491-2017 Standard test method of the flexural beam test for porous asphalt binder
KS F 2395-2014(2019) Standard test method for bend testing of asphalt mixtures
KS F 2491-2017(2022) Standard test method of the flexural beam test for porous asphalt binder
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M ISO 6721-3:2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS M ISO 6721-3-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, standard curve method

GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 2539-1981 Paraffins--Determination of melting point(cooling curve)
GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
GB/T 14235.1-1993 Surface roughness for plastic parts
GB/T 5058-1985 Steel--Determination of isothermal transformation diagram--Magnetic method
GB/T 2539-2023 Determination of melting point of petroleum wax by cooling curve method
GB/T 2539-2008 Petroleum waxes. Determination of melting point. Cooling curve method
GB/T 238-2002 Metallic materials-Wire-Reverse bend test
GB/T 238-2013 Metallic materials.Wire.Reverse bend test
GB/T 30315-2013 Test method for reciprocating flex fatigue of dipped cords
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve

YU-JUS, standard curve method

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve

SE-SIS, standard curve method

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992

German Institute for Standardization, standard curve method

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 13320:1979 Acoustics; spectra and frequency curves, concepts, representation
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design

TIA - Telecommunications Industry Association, standard curve method

TIA/EIA-455-44B-1992 FOTP-44 Refractive Index Profile@ Refracted Ray Method
TIA-455-44-B-1992 FOTP-44 Refractive Index Profile@ Refracted Ray Method (Withdrawn May 2003)

Taiwan Provincial Standard of the People's Republic of China, standard curve method

CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 7389-1981 Method for analysis of radioisotopes aluminum absorption curve
CNS 9815-1983 Method of Test for Wires Breakage of Appliance
CNS 11521-1986 Method for Making Anode Polarization Measurement for Stainless Steels

Group Standards of the People's Republic of China, standard curve method

T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers

Professional Standard - Agriculture, standard curve method

农业农村部公告第273号 Standard for the detection method of toltrazuril sulfone residues (trial implementation)

Society of Automotive Engineers (SAE), standard curve method

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE ARP958D-2003 Electromagnetic Interference Measurement Antennas; Standard Calibration Method

Professional Standard - Aviation, standard curve method

HB 5261-1983 KR curve test method for sheet metal
HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
HB 5488-1991 Method for determination of stress-strain curve of metallic materials

Professional Standard - Password Professional Standards, standard curve method

GM/T 0003-2012 SM2 Elliptic Curve Public Key Cryptography Algorithm
GM/T 0003.2-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 2:Digital signature algorithm
GM/T 0003.4-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 4:Public key encryption algorithm

American National Standards Institute （ANSI), standard curve method

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/UL 2556-2005 Standard Test Methods for Wires and Cables (Bulletin)

IT-UNI, standard curve method

UNI S 195-1943
UNI EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method

CZ-CSN, standard curve method

CSN 58 8775-1994 Methods of test for fats and oils Determination of cooling curve
CSN 09 3351 Zc-1989
CSN 58 8775 Z1-1998

CL-INN, standard curve method

INDITECNOR 35-9d-1961

Professional Standard - Petroleum, standard curve method

SY/T 5906-2003 The method for plotting chart on pressure-loss curve through choke of water injection well
SY/T 5906-2012 The method for plotting chart on pressure-loss curve through water nozzle
SY 5906-2012 Method for making water distribution nozzle nozzle loss curve chart
SY/T 5906-1993 Method for making water distribution nozzle nozzle loss curve chart
SY/T 7549-2000 Determination of viscosity-temperature charts for crude oil with rotational viscometers

IETF - Internet Engineering Task Force, standard curve method

RFC 6605-2012 Elliptic Curve Digital Signature Algorithm (DSA) for DNSSEC

Professional Standard - Coal, standard curve method

MT/T 581-1996 Test method of inner curve hydraulic motor for mining

Professional Standard - Electron, standard curve method

SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution

Indonesia Standards, standard curve method

SNI ASTM C674:2010 Standart Test Methods for Flexural Properties of Ceramic Whiteware Materials1

PK-PSQCA, standard curve method

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

Professional Standard - Machinery, standard curve method

JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, standard curve method

GB/T 33100-2016 Test methods of belt flexing fatigue for dipped cords
GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals

IN-BIS, standard curve method

IS 5213-1969

Japanese Industrial Standards Committee (JISC), standard curve method

JIS G 0579:2007 Method of anodic polarization curves measurement for stainless steels
JIS H 7201:1991 Method of determining the PCT relations of hydrogen -- absorbing alloys
JIS K 7244-3:1999 Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method

Professional Standard - Military and Civilian Products, standard curve method

WJ 1866-1989 Measuring method of pressure-density curve for explosives

Shaanxi Provincial Standard of the People's Republic of China, standard curve method

DB61/T 1084-2017 Concrete strength measurement curve by ultrasonic rebound comprehensive method

American Welding Society (AWS), standard curve method

WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels

Professional Standard - Ferrous Metallurgy, standard curve method

YB/T 5128-1993 Method for measuring the continuous cooling transformation curve of steel (expansion method)

Institute of Electrical and Electronics Engineers (IEEE), standard curve method

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

能源部, standard curve method

SY 5407-1991 Determination of capillary pressure curve semi-permeable partition method

SAE - SAE International, standard curve method

SAE ARP958C-1997 Electromagnetic Interference Measurement Antennas Standard Calibration Method
SAE ARP958B-1996 Electromagnetic Interference Measurement Antennas (Standard Calibration Method)
SAE ARP958A-1992 Electromagnetic Interference Measurement Antennas; Standard calibration method

工业和信息化部/国家能源局, standard curve method

JB/T 13051-2017 High-power diesel engine crankshaft cleanliness limits and testing method standards

ESDU - Engineering Sciences Data Unit, standard curve method

ESDU 80035-1980 Buckling of outstanding flanges. Direct stresses varying linearly or parabolically.

Danish Standards Foundation, standard curve method

DS/EN ISO 6721-3:1996 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
DS/ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Flexural vibration – Resonance-curve method

KR-KS, standard curve method

KS M ISO 6721-3-2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method

ES-UNE, standard curve method

UNE-EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)