ZH
RU
ES

Automatic Lead Detection

Automatic Lead Detection, Total:411 items.

In the international standard classification, Automatic Lead Detection involves: Office machines, Miscellaneous domestic and commercial equipment, Vocabularies, Technical drawings, Telecommunication systems, Pipeline components and pipelines, Testing of metals, Iron and steel products, Equipment for the chemical industry, Mechanical testing, Non-destructive testing, Installations in buildings, Optoelectronics. Laser equipment, Optics and optical measurements, Power transmission and distribution networks, Welding, brazing and soldering, Textile fibres, Characteristics and design of machines, apparatus, equipment, Medical equipment, Road vehicles in general, Paints and varnishes, Machine tools, Test conditions and procedures in general, Alarm and warning systems, Diagnostic, maintenance and test equipment, Lifting equipment, Biology. Botany. Zoology, Industrial automation systems, Rubber and plastics products, Environmental protection, Analytical chemistry, Air quality, Linear and angular measurements, Geology. Meteorology. Hydrology, Fuels, Farming and forestry, Medical sciences and health care facilities in general, Equipment for the rubber and plastics industries, IT terminal and other peripheral equipment, Semiconducting materials, Quality, Fluid power systems, TESTING, Radiocommunications, Soil quality. Pedology, Hydraulic energy engineering, Products of the textile industry, Electrical and electronic testing, Galvanic cells and batteries, Equipment for petroleum and natural gas industries, Fluid storage devices, Electrical engineering in general, Protection against fire, Applications of information technology, Electrical accessories, Motor cycles and mopeds, Power stations in general, Accident and disaster control, Agricultural machines, implements and equipment, Electricity. Magnetism. Electrical and magnetic measurements, Occupational safety. Industrial hygiene, Burners. Boilers, Valves, Spices and condiments. Food additives, Petroleum products in general.

Taiwan Provincial Standard of the People's Republic of China, Automatic Lead Detection

CNS 7080-1983 Method of Test for Sharp Pencils
CNS 7082-1983 Method of Test of Leads for Sharp Pencil

Japanese Industrial Standards Committee (JISC), Automatic Lead Detection

JIS S 6005:2000 Leads for mechanical pencils
JIS S 6005:2007 Leads for mechanical pencils
JIS S 6005:2019 Leads for mechanical pencils
JIS G 0586:2012 Automated flux leakage examination of steel pipes and tubes
JIS G 0586:2021 Automated flux leakage examination of steel pipes and tubes
JIS G 0589:2013 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes
JIS Z 2324-1:2018 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS D 1604:1976 Inspection of condensers for automobile contact breakers
JIS A 4302:1992 Inspection standard of elevator, escalator and dumbwaiter

Professional Standard - Environmental Protection, Automatic Lead Detection

HJ 762-2015 Specifications and Test Procedures for Automatic/On-line Monitoring of Lead in Water
HJ/T 175-2005 Specifications and test procedures for automatic rainfall monitor
HJ/T 174-2005 Specifications and test procedures for automatic rainfall sampler
HJ/T 372-2007 The technical requirement and test procedures for water quality automatic sampler
HJ 764-2015 Specifications and Test Procedures for Automatic/On-line Monitoring of Arsenic in Water
HJ 763-2015 Specifications and Test Procedures for Automatic/On-line Monitoring of Cadmium in Water
HJ 926-2017 Technical requirements and detection methods for mercury water quality automatic on-line monitor
HJ 798-2016 Specifications Test Methods for Automatic/On-line Monitor of Total Chromium in Water
HJ 101-2019 Ammonia nitrogen water quality online automatic monitor technical requirements and detection methods
HJ 609-2019 Hexavalent chromium water quality automatic on-line monitor technical requirements and detection methods

Korean Agency for Technology and Standards (KATS), Automatic Lead Detection

KS G 2602-2019 Leads for pencils, coloured pencils and mechanical pencils
KS G ISO 9177-1:2002 Mechanical pencils-Part 1:Classification, dimensions, performance requirements and testing
KS B 0894-2003 Methods for automatic ultrasonic testing for welds of ferritic steel
KS M 5986-2008(2018) Detection of lead in paint and dried paint films
KS B 4044-2007(2012) Test code for performance and accuracy of single spindle automatic lathes(sliding headstock type)
KS E 4116-2006(2011) Hot wire type gas alarms
KS E 4115-2006(2011) Interferometer type gas alarms
KS E 4115-1980 Interferometer type gas alarms
KS B 0894-2003(2013) Methods for automatic ultrasonic testing for welds of ferritic steel
KS R 1304-2016 Determination of lead and cadmium for carbon brushes in motors
KS R 1304-2016(2021) Determination of lead and cadmium for carbon brushes in motors
KS B 5643-2003 Continuous analyzers for oxidants in ambient air
KS B ISO 20601:2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 10893-8:2018 Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
KS B 0515-1999 Standard qualification procedure for semi-automatic welding technique
KS M ISO 8819-2003(2018)
KS B ISO 13588:2015 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
KS B ISO 10893-2:2018 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS B ISO 10893-10:2018 Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)

HU-MSZT, Automatic Lead Detection

Association Francaise de Normalisation, Automatic Lead Detection

NF ISO 20318-1:2019 Porte-mines et mines pour usage général - Classification, dimensions, qualité et méthodes d'essai - Partie 1 : porte-mines
NF E04-400-2*NF ISO 20318-2:2019 Mechanical pencils and leads for general use - Classification, dimensions, quality and test methods - Part 2 : black leads
NF EN ISO 13588:2019 Essais non destructif des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés
NF M41-011*NF EN ISO 8819:1995 Liquefied petroleum gases. Detectionof hydrogen sulfide. Lead acetate method.
NF A89-514*NF EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
NF A89-517*NF EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
NF EN ISO 10893-10:2011 Essais non destructifs des tubes en acier - Partie 10 : contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longit...
NF EN ISO 10893-10/A1:2020 Essais non destructifs des tubes en acier - Partie 10 : contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longit...
NF EN ISO 20601:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique multi-éléments automatisés pour les composants en acier à paroi mince
NF E04-707-1*NF ISO 9177-1:2016 Mechanical pencils for technical drawings - Part 1 : classification, dimensions, performance requirements and testing
NF ISO 9177-1:2016 Porte-mines pour le dessin technique - Partie 1 : classification, dimensions, exigences de performance et essais
NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
NF EN ISO 10893-9:2011 Essais non destructifs des tubes en acier - Partie 9 : contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles fortes utilisées pour la fabrication des tubes en acier soudés
NF EN ISO 10893-3/A1:2019 Essais non destructifs des tubes en acier - Partie 3 : contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des ...
NF EN ISO 10893-11:2011 Essais non destructifs des tubes en acier - Partie 11 : contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales
NF A89-512:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF EN ISO 10893-2:2011 Essais non destructifs des tubes en acier - Partie 2 : contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure ou soudés (sauf à l'arc immergé sous flux en poudre)
NF EN ISO 10893-8/A1:2020 Essais non destructifs des tubes en acier - Partie 8 : contrôle automatisé par ultrasons pour la détection des dédoublures des tubes en acier sans soudure et soudés - Amendement 1 : changement des critères d'acceptation
NF A49-785-8/A1*NF EN ISO 10893-8/A1:2020 Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
NF P82-270-1*NF EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks - Part 1 : energy measurement and verification
NF EN ISO 10893-3/A2:2020 Essais non destructifs des tubes en acier - Partie 3 : contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des ...
NF G07-220-3*NF EN 14278-3:2004 Determination of the stickiness of cotton fibres - Part 3 : method using an automatic thermodetection rotating drum device
NF EN ISO 10893-3:2011 Essais non destructifs des tubes en acier - Partie 3 : contrôle automatisé par flux de fuite sur toute la circonférence des tubes en aciers ferromagnétique sans soudure ou soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des...
NF EN ISO 23864:2021 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique d'acquisition automatisée de focalisation en tout point (FTP) et de techniques associées
NF EN 14278-3:2004 Textiles - Détermination du collage des fibres de coton - Partie 3 : méthode utilisant un dispositif automatique de thermodétection à tambour rotatif
NF A49-785-11/A1*NF EN ISO 10893-11/A1:2020 Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency; change of acceptance

British Standards Institution (BSI), Automatic Lead Detection

17/30321961 DC BS ISO 20318-1. Mechanical pencils and leads for general use. Classification, dimensions, quality and test methods.Part 1. Mechanical pencils. Part 1: Mechanical pencils
BS PD CEN/TR 15134:2005 Non-destructive testing — Automated ultrasonic examination — Selection and application of systems
BS EN ISO 10893-8:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BS EN ISO 13588:2019 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN ISO 10893-2:2011+A1:2020 Non-destructive testing of steel tubes - Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components
BS ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 10893-9:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
BS EN ISO 10893-9:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
19/30398285 DC BS EN ISO 10893-8 AMD1. Non-destructive testing of steel tubes. Part 8. Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BS EN ISO 13588:2012 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS EN 10246-6:2000 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
BS EN 10246-10:2000 Non-destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
19/30398267 DC BS EN ISO 10893-2 AMD1. Non-destructive testing of steel tubes. Part 2. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS ISO 8103-9:2022 Escalators and moving walks - Measurement of ride quality
BS EN ISO 10893-11:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
17/30321964 DC BS ISO 20318-2. Mechanical pencils and leads for general use. Classification, dimensions, quality and test methods. Part 2. Black leads
BS 2655-7:1970 Specification for lifts, escalators, passenger conveyors and paternosters. Testing and inspection
BS EN ISO 10893-11:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
19/30398294 DC BS EN ISO 10893-11 AMD1. Non-destructive testing of steel tubes. Part 11. Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 10246-3:2000 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN ISO 10893-3:2011 Non-destructive testing of steel tubes. Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 10246-13:2000 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
BS EN 10246-15:2000 Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
19/30398288 DC BS EN ISO 10893-9 AMD1. Non-destructive testing of steel tubes. Part 9. Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
BS EN ISO 10893-1:2011+A1:2020 Non-destructive testing of steel tubes - Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
BS EN ISO 10893-3:2011+A2:2020 Non-destructive testing of steel tubes - Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections

International Telecommunication Union (ITU), Automatic Lead Detection

ITU-T Q.137-1988 Automatic testing equipment
ITU-R INFORME M.2084 SPANISH-2006 Satellite detection of automatic identification system messages
ITU-R REPORT M.2084 ARABIC-2006 Satellite detection of automatic identification system messages
ITU-R REPORT M.2084 CHINESE-2006 Satellite detection of automatic identification system messages
ITU-R REPORT M.2084 RUSSIAN-2006 Satellite detection of automatic identification system messages
ITU-R BS.1693 SPANISH-2004 Procedure for the performance test of automated query-by-humming systems
ITU-R BS.1693 FRENCH-2004 Procedure for the performance test of automated query-by-humming systems
ITU-R SM.1537-1-2013 Automation and integration of spectrum monitoring systems with automated spectrum management
ITU-T M.733-1988 Transmission routine maintenance measurements on automatic and semi-automatic telephone circuits
ITU-R SM.1537 SPANISH-2001 Automation and integration of spectrum monitoring systems with automated spectrum management Automatizaci髇 e integraci髇 de los sistemas de comprobaci髇 t閏nica del espectro con la gesti髇 autom醫ica del espectro

PL-PKN, Automatic Lead Detection

PN BN 6094-07-1966
PN-EN ISO 10893-11-2011/A1-2021-01 E Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections -- Amendment 1: Change of ultrasonic test frequency; change of accepta

Group Standards of the People's Republic of China, Automatic Lead Detection

T/QGCML 1650-2023 Automatic sampling equipment with liquid level detection
T/CEA 9012.2-2023 Self-inspection requirements for escalators and moving walks before delivery
T/SZIEIA 02-2022 AOI automatic optical inspection system
T/ZEIIA 03-2022 OLED automatic optical inspection equipment
T/CIET 032-2023 Door motor automatic detection equipment
T/CIET 25-2023 Rotor shaft automatic detection equipment
T/CSEE 0334.1-2022 Automatic detection device for relay protection tester Part 1: Automatic detection device for analog interface
T/CASMES 46-2022 Automatic detection system of appearance defects for tubular yarn
T/ZEIIA 04-2022 TFT-LCD Automatic Optical Inspection Equipment
T/CIET 031-2023 Fully automatic axial clearance detection equipment
T/CIPR 082-2023 Automatic test tube inner wall cleaning machine
T/CSTM 00425-2023 Non-destructive testing — Steel products — Characterization and verification of automatic eddy current flaw detector
T/CSTM 00424-2023 Non-destructive testing — Steel products—Characterization and verification of automatic infrared thermography flaw detector
T/CSTM 00426-2023 Non-destructive testing — Steel products— Characterization and verification of automatic magnetic flux leakage flaw detector
T/CIPR 045-2022 Reverse light environment face automatic detection technology
T/QGCML 901-2023 Functional Educational Robot Automatically Detecting Obstacles
T/CSTM 00674-2023 Non-destructive testing—Steel products—Automatic testing of wate-jet coupling ultrasonic for seamless steel tube
T/CI 062-2022 Automatic ultrasonic testing of internal combustion engine valve by water immersion
T/GDAQI 009-2019 Multi-function testing instrument for escalator safety clearance
T/ZQBJXH 014-2021 Testing specification for automatic driving function of mining vehicles
T/EERT 025-2022 Automatic detection liquid level instrument for urban drainage pipe network
T/CSTM 00675-2023 Non-destructive testing—Steel products—Phased-array automated ultrasonic testing for weld imperfections of submerged arc welded steel pipe
T/GDCKCJH 060-2022 Testing method for automatic testing line of vehicle domain control unit
T/GDEIIA 2-2020 AOI Technical Specification For Automotive Touch Panel
T/CRIA 19001-2020 Automatic inflating air test method for air tightness of rubber gloves
T/PCAC 00004-2018 Bank card automatic teller machine (ATM) terminal detection specification
T/CZSBDTHYXH 001-2023 Wafer defects Automatic optical inspection equipment
T/CSTM 00829-2022 Measurement method of comprehensive properties for automatic eddy current testing system for rails
T/CSTM 00828-2022 Measurement method of comprehensive properties for automatic ultrasonic testing system for rails
T/CIITA 201.3-2021 Urban rail transit ─ automatic fare collection system ─ part 3 : system test
T/SDIE 15-2021 Electromagnetic signal online detection and automatic identification software test specification
T/CAMMT 44-2022 General requirements for laser online automated flexible inspection systems
T/GDBIA 01-2023 Regulations of electric bicycle battery rapid testing
T/CEEIA 329-2018 Residual current operated protective devices with self-test function（RCD-ST）
T/JSEBA 001-2020 General technical requirements and test method of Helmets for electric bicyclists
T/SEIA 003-2019 General technical requirements and test method of Helmets for electric bicycle
T/ZJBE 001-2020 General technical requirements and test method of Helmets for electric bicycle
T/CATSI 02015-2021 Safety technical requirements for automatic assembly and testing line of gas cylinder valves
T/NJ 1479-2023 Automated detection method of harvest losses in grain combine harvesters
T/SCMES 20-2023 Automatic inspection equipment for interior space geometry of transportation vehicles
T/MZMS 0002-2021 Calibration Specifications for AOI (Automatic Optical Inspection) Equipment in Printed Circuit Industry
T/CIMA 0009-2019 Automatic pretreatment instrument for rapid detection of malachite green in aquatic products
T/QGCML 043-2020 Constant temperature and humidity automatic weighing system technical requirements and testing methods
T/SMA 0035-2023 Technical Specification for External Circuit Breaker of Electric Energy Meter Automatic Testing System

工业和信息化部/国家能源局, Automatic Lead Detection

JB/T 12725-2016 Non-destructive testing instrument ultrasonic automatic testing system

Danish Standards Foundation, Automatic Lead Detection

DS/CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
DS/EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
DS/EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
DS/EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
DS/EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
DS/EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
DS/EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodection plate device
DS/EN 1643:2000 Valve proving systems for automatic shut-off valves for gas burners and gas appliances

AENOR, Automatic Lead Detection

UNE-CEN/TR 15134:2011 IN Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
UNE 1164-1:1996 MECHANICAL PENCILS. PART 1: CLASSIFICATION, DIMENSIONS, PERFORMANCE REQUIREMENTS AND TESTING.
UNE-EN ISO 13588:2013 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
UNE-EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
UNE-EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
UNE-EN ISO 8819:1996 LIQUEFIED PETROLEUM GASES. DETECTION OF HYDROGEN SULFIDE. LEAD ACETATE METHOD. (ISO 8819:1993).
UNE-EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
UNE-EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
UNE-EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device

SAE - SAE International, Automatic Lead Detection

SAE J1939-16-2018 Automatic Baud Rate Detection Process
SAE J1939-16-2015 Automatic Baud Rate Detection Process

Society of Automotive Engineers (SAE), Automatic Lead Detection

SAE J1939/16-2018 Automatic Baud Rate Detection Process
SAE J1939/16-2015 Automatic Baud Rate Detection Process
SAE EPR2021002-2021 Unsettled Topics Concerning Coating Detection by LiDAR in Autonomous Vehicles

Military Standard of the People's Republic of China-General Armament Department, Automatic Lead Detection

GJB 5043-2001 Specifications for automatic mine detectors
GJB 2332A-2021 General specification for automatic electrical detection system for torpedoes
GJB 2332-1995 General specification for automatic electrical detection system for torpedoes
GJB 9135-2017 General specification for automatic detection system of military AC and DC power supply characteristics
GJB 8709.6-2015 Rocket Launcher Test Methods Part 6: Automatic Aiming System Detection

YU-JUS, Automatic Lead Detection

JUS N.S6.200-1985 Components of auto matic fire detection system. Introduction
JUS N.S6.211-1985 Components of automatic fire detection $ystems. Heat sensitive detector. Po/'nt detector containing a tatic. element

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Automatic Lead Detection

REPORT M.2084-2006 Satellite detection of automatic identification system messages

Professional Standard - Electricity, Automatic Lead Detection

DL/T 2367-2021 Technical specifications for automatic detection system of distribution automation terminal
DL/T 1529-2016 Inspection code for remote terminal unit equipments of distribution automation
DL/T 1391-2014 Test guidelines of digital automatic voltage regulator performance related to power grid

National Metrological Verification Regulations of the People's Republic of China, Automatic Lead Detection

JJG 631-1989 Verification Regulation for Ammonia Automatic Monitor
JJG 631-2013 Verification Regulation of Ammonia-Nitrogen Automatic Analyzers
JJG 656-1990 Verification Regulation of Nitrate Automatic Monitor
JJG 527-2007 Automatic Monitor System for Vehicles Speeding
JJG(机械) 72-1992 Verification rules for small power single-phase motor automatic detection device
JJG 692-2010 Verification Regulation of Non-invasive Automated Sphygmomanometers
JJG 656-2013 Verification Regulation of Nitrate-Nitrogen Automatic Analyzers
JJG 1095-2014 Environmental Noise Automatic Monitors
JJG(民航) 0055-2000 Verification Regulation of Model F80129-100 Antiskid autobrake tester
JJG(交通) 086-2007 Auto-detect Meter of Back-insert Type for Road Denection
JJG(轻工) 28-1989 Verification rules for bicycle flywheel circular runout tester
JJG(民航) 050-1999 Verification Regulation of Model F80217-103 Autopilot Test Set
JJG(轻工) 42-1989 Verification rules for bicycle bell rotation flexibility tester
JJG(机械) 110-1992 SYZZ series speed and fuel consumption automatic measuring instrument verification regulations
JJG(轻工) 44-1989 Verification rules for radial runout tester of bicycle bell shaft
JJG(电子) 04041-1991 BJ3192 type integrated operational amplifier automatic tester verification regulations
JJG(民航) 013-1995 Verification Regulation of Autopilot System Comprehensive Test Bench“AИ-5”
JJG(民航) 0054-2000 Verification Regulation of Antiskid Brake Controller Tester Model 42-051p

International Organization for Standardization (ISO), Automatic Lead Detection

ISO 20318-2:2019 Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 2: Black leads
ISO 9177-1:2011 Mechanical pencils - Part 1: Classification, dimensions, performance requirements and testing
ISO 8819:1987 Liquified petroleum gases — Detection of hydrogen sulfide — Lead acetate method
ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 20601:2018 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
ISO/TS 16829:2017 Non-destructive testing - Automated ultrasonic testing - Selection and application of systems
ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
ISO 9177-1:2016 Mechanical pencils for technical drawings - Part 1: Classification, dimensions, performance requirements and testing
ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
ISO 10893-3:2011 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections

CEN - European Committee for Standardization, Automatic Lead Detection

EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components

European Committee for Standardization (CEN), Automatic Lead Detection

EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
EN ISO 8819:1995 Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993)
EN ISO 23864:2021 Non‐destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
EN 10246-6:1999 Non-Destructive Testing of Steel Tubes - Part 6: Automatic Full Peripheral Ultrasonic Testing of Seamless Steel Tubes for the Detection of Transverse Imperfections
EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
PD CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
EN 10246-16:2000 Non-Destructive Testing of Steel Tubes - Part 16: Automatic Ultrasonic Testing of Area Adjacent to the Weld Seam of Welded Steel Tubes for the Detection of Laminar Imperfections
EN 10246-8:1999 Non-Destructive Testing of Steel Tubes - Part 8: Automatic Ultrasonic Testing of the Weld Seam of Electric Welded Steel Tubes for the Detection of Longitudinal Imperfections
EN 10246-3:1999 Non-Destructive Testing of Steel Tubes - Part 3: Automatic Eddy Current Testing of Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for the Detection of Imperfections
EN ISO 10893-8:2011/A1:2020 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
EN 10246-15:2000 Non-Destructive Testing of Steel Tubes - Part 15: Automatic Ultrasonic Testing of Strip/Plate Used in the Manufacture of Welded Steel Tubes for the Detection of Laminar Imperfections
prEN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)

IT-UNI, Automatic Lead Detection

ECIA - Electronic Components Industry Association, Automatic Lead Detection

RS-468-1981 Lead Taping of Components in the Radial Configuration for Automatic Handling
EIA-468-A-1990 Lead Taping of Components in the Radial Configuration for Automatic Handling
EIA-468-B-1994 Lead Taping of Components in the Radial Configuration for Automatic Handling

SE-SIS, Automatic Lead Detection

SIS 11 40 50-1972 Non-destructive testing. Terminology. Register

AGMA - American Gear Manufacturers Association, Automatic Lead Detection

01FTM3-2001 Automated Spiral Bevel Gear Pattern Inspection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Automatic Lead Detection

GB/T 28297-2012 Thicker steel plates.Method for automatic ultrasonic testing
GB/T 20490-2023 Non-destructive testing of steel tubes Automatic ultrasonic testing of seamless and welded steel tubes for lamination imperfections
GB/T 31932-2015 Method for electromagnetic automatic ultrasonic testing for thicker steel plates
GB/T 41812-2022 General rules for performance testing of automatic liquid handling workstation
GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/T 42662-2023 Non-destructive testing of steel pipes Automatic ultrasonic testing of steel strip/steel plate lamination flaws for welded steel pipes
GB/T 42664-2023 Non-destructive testing of steel pipes Automatic ultrasonic testing of longitudinal and/or transverse imperfections in welded steel pipe welds
GB/T 7735-2016 Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections

American Society of Mechanical Engineers (ASME), Automatic Lead Detection

ASME A17 Checklist 4-1989 Checklist for inspection and test of escalators
ASME A17.2-2004 Guide for Inspection of Elevators, Escalators, and Moving Walks
ASME A17.2-2007 Guide for Inspection of Elevators, Escalators, and Moving Walks
ASME A17.2-1937 Guide for Inspection of Elevators, Escalators, and Moving Walks
ASME A17.2-2010 Guide for Inspection of Elevators, Escalators, and Moving Walks (Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic Elevators, Inclined Elevators, and Escalators and Moving Walks)
ASME 2324-2001 Use of Automated Ultrasound Leak Detection System in Lieu of Visual Inspections Required by UG-100(d) Section VIII, Division 1
ASME A17.2.3-1998 Inspectors' manual for escalators and moving walks

Professional Standard - Automobile, Automatic Lead Detection

QC/T 943-2013 Test methods of lead and cadmium in automobiles materials

GOSTR, Automatic Lead Detection

GOST 34486.2-2018 Escalators and moving walks. Rules and methods of examinations (tests) and measurements. Measurement of ride quality
GOST R ISO 10893-2-2016 Seamless and welded steel tubes. Part 2. Automated eddy current testing for the detection of imperfections
GOST ISO 10893-8-2017 Seamless and welded steel tubes. Part 8. Automated ultrasonic method of testing for the detection of imperfections
GOST ISO 10893-10-2017 Seamless and welded steel tubes. Part 10. Automated full peripheral ultrasonic testing for the detection of longitudinal and/or transverse imperfections
GOST 34489-2018 Escalators and passenger conveyors. Rules and methods of examinations (tests) and measurements. Rules of sampling

国家市场监督管理总局、中国国家标准化管理委员会, Automatic Lead Detection

GB/T 40733-2021 Non-destructive testing of welds—Ultrasonic testing—Use of automated phased array technology

German Institute for Standardization, Automatic Lead Detection

DIN EN ISO 10893-2:2020-10 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020); German version EN ISO 10893-2:2011 + A1...
DIN EN ISO 10893-1:2020-10 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd 1:2020); German version EN ISO 1...
DIN EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
DIN EN ISO 10893-3:2020-10 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-...
DIN EN ISO 10893-8:2020-10 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020); German version EN ISO 10893-8:2011 + A1:2020
DIN EN ISO 10893-10:2020-10 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1...
DIN EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
DIN EN ISO 10893-11:2020-10 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020); German version EN ISO 10893-11:201...
DIN EN ISO 10893-9:2020-10 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020); German version EN ISO 10893-9:2011 +...
DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
DIN EN ISO 20601:2017 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for steel components with small wall thickness (ISO/DIS 20601:2017); German and English version prEN ISO 20601:2017
DIN V 54129:2006 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems; German version CEN/TR 15134:2005
DIN EN 14278-2:2004-05 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004
DIN EN ISO 10893-1:2011 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011); German version EN ISO 10893-1:2011
DIN 18723-5:1990 Field procedure for precision testing of surveying instruments; plumbing instruments
DIN EN ISO 23864:2022-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021); German version EN ISO 23864:2021
DIN 51769-9:1981 Testing of petroleum products; determination of the lead content (total lead) of liquid mineral oil hydrocarbons with a mass fraction of lead of 50 to 1000 g/kg; iodine monochlorid disentegratien; extraction with dithizone and photometric determinatio

ES-UNE, Automatic Lead Detection

UNE-EN ISO 10893-2:2011/A1:2021 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change accep...
UNE-EN ISO 10893-1:2011/A1:2021 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference not...
UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
UNE-EN ISO 10893-3:2011/A1:2021 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment...
UNE-EN ISO 10893-3:2011/A2:2021 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment...
UNE-EN ISO 10893-10:2011/A1:2021 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of u...
UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
UNE-EN ISO 23864:2022 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
UNE-EN ISO 10893-11:2011/A1:2021 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of accept...
UNE-EN ISO 10893-8:2011/A1:2021 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)

Professional Standard - Electron, Automatic Lead Detection

SJ 20235-1993 Verification regulation of model IC-1500 automatic tester
SJ 20237-1993 Verification regulation of model GH3123 IC automatic tester
SJ/T 31123-1994 Requirements of readiness and methods of inspection and assessment for automatic multi-point test probes

IPC - Association Connecting Electronics Industries, Automatic Lead Detection

IPC AI-641-1987 User's Guidelines for Automated Solder Joint Inspection Systems
IPC AI-642-1988 User's Guidelines for Automated Inspection of Artwork@ Innerlayers and Unpopulated PWBs
IPC 9262-2016 Specification for Characterization and Verification of Assembly Level Automatic Optical Inspection Equipment
IPC AI-640-1987 User's Guidelines for Automated Inspection of Unpopulated Thick Film Hybrid Substrates

Association of German Mechanical Engineers, Automatic Lead Detection

VDI/VDE 2628 Blatt 1-1989 Automated visual inspection; description of the testing task
VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)

国家能源局, Automatic Lead Detection

SY/T 7484-2020 Determination of natural gas hydrocarbon dew point, cooling mirror automatic detection method
SY/T 7316-2016 Electromagnetic ultrasonic automatic inspection of plates for oil and gas transportation steel pipes

RU-GOST R, Automatic Lead Detection

GOST R 50250-1992 Mechanical pencils. Part 1. Glassifications, dimensions, performance requirements and testing
GOST ISO 8819-2013 Liquefied petroleum gases. Detection of hydrogen sulfide. Lead acetate method
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection

ITE - Institute of Transportation Engineers, Automatic Lead Detection

IR-134-E-2011 Recent Developments in Automated Pedestrian Detection: An ITE Informational Report

American National Standards Institute （ANSI), Automatic Lead Detection

ANSI/ALI ALOIM-2008 Automotive Lifts – Safety Requirements for Operation, Inspection and Maintenance
ANSI/ASME A17.2-2012 Guide for Inspection of Elevators, Escalators, and Moving Walks
ANSI/SCTE 169-2-2010 IPCablecom SMA Part 2: Security, Monitoring, and Automation Specification

Lithuanian Standards Office , Automatic Lead Detection

LST EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
LST EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
LST EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
LST EN ISO 8819:2000 Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993)
LST EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
LST EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
LST EN 14278-2-2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device
LST EN IEC 63180:2020 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection (IEC 63180:2020)
LST EN 1643-2001 Valve proving systems for automatic shut-off valves for gas burners and gas appliances

National Metrological Technical Specifications of the People's Republic of China, Automatic Lead Detection

JJF 1424-2013 Program of Pattern Evaluation of Ammonia-Nitrogen Automatic Analyzers
JJF(机械) 014-2008 Calibration specification for electric iron automatic detection device
JJF 1261.5-2017 Rules of Metrology Testing for Energy Efficiency of Automatic Electric Rice Cookers
JJF(机械) 016-2008 Calibration specification for automatic rice cooker factory inspection device
JJF 1261.5-2012 Rules of Metrology Testing for Energy Efficiency Label of Automatic Electric Rice Cookers
JJF(机械) 012-2008 Calibration specification for small power single-phase motor automatic detection device
JJF 2056-2023 Calibration Specification for Automatic Microbial Detection Systems based on Impedance Method

NL-NEN, Automatic Lead Detection

NEN 881-1970 Requirements and test methods for red lead pigments
NEN 878-1969 Requirements and test methods for pigments. White lead

American Society for Testing and Materials (ASTM), Automatic Lead Detection

ASTM D4762-88(2001) Standard Guide for Testing Automotive/Industrial Composite Materials
ASTM D4762-88(1995)e1 Standard Guide for Testing Automotive/Industrial Composite Materials
ASTM D4762-16 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D3618-05(2015) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D6612-00(2011) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
ASTM E1753-19 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM E1753-18 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM E1753-18a Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM D3618-85a(1999) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D3618-05(2022) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D361-65 Standard test method for lead content in paint and dry paint films
ASTM E2271/E2271M-18 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
ASTM E1294-89(1999) Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Automatic Lead Detection

ASHRAE OR-05-13-2-2005 Application of Fault Detection and Diagnosis Techniques to Automated Functional Testing
ASHRAE 29 ERTA-2010 Method of Testing Automatic Ice Makers

工业和信息化部, Automatic Lead Detection

YB/T 6080-2022 Automatic ultrasonic testing method for square seamless steel pipes
YB/T 4812-2020 Comprehensive performance testing method for steel plate automatic ultrasonic inspection system
YB/T 4289-2020 Comprehensive performance testing method of automatic magnetic flux leakage detection system for steel pipes and steel rods
YB/T 4083-2020 Comprehensive performance testing method of automatic eddy current testing system for steel pipes and steel rods
YB/T 4082-2020 Comprehensive performance testing method of automatic ultrasonic inspection system for steel pipes and steel rods

KR-KS, Automatic Lead Detection

KS B ISO 20601-2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 10893-8-2018 Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
KS B ISO 10893-2-2018 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
KS B ISO 10893-10-2018 Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of longitudinal and/or
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)

BE-NBN, Automatic Lead Detection

NBN S 21-108-1988 Components of automatic fire détection Systems - Part 8 : High temperature heat detectors
NBN S 21-101-1987 Components of automatic fire détection Systems - Part 1 : Introduction
NBN S 21-100-1996 Rescue and firefighting equipment - Design of generai installations for automatic fire detection

Professional Standard - Urban Construction, Automatic Lead Detection

CJJ/T 162-2011 Technical specification for test technology of urban rail transit automatic fare collection system

Professional Standard - Agriculture, Automatic Lead Detection

NY/T 1121.24-2012 Soil testing.Part 24:Determination of total nitrogen in soil.Automatic kjeldahl apparatus method
LS/T 6145-2023 Colloidal gold rapid quantitative method for the determination of lead in grain and oil inspection

Professional Standard - Energy, Automatic Lead Detection

NB/T 11056-2023 Calibration specification for automatic detection device of relay protection tester
NB/SH/T 6038-2021 Automatic method for determination of flow pressure of lubricating grease

Jilin Provincial Standard of the People's Republic of China, Automatic Lead Detection

DB22/T 395.1-2017 Physical and chemical testing methods for health care products Part 1: Determination of lead

未注明发布机构, Automatic Lead Detection

BS EN ISO 23864:2021(2022) Non - destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
DIN EN ISO 23864:2022 Non-destructive testing of welded joints – Ultrasonic testing – Use of the automated total focusing method (TFM) and related technologies (ISO 23864:2021)

Guangdong Provincial Standard of the People's Republic of China, Automatic Lead Detection

DB44/T 2003-2017 Escalator and moving walk overspeed and non-manipulation reverse protection function tester

Professional Standard - Traffic, Automatic Lead Detection

JTG/T E61-2014 Specifications of Automated Pavement Condition Survey

Professional Standard - Ocean, Automatic Lead Detection

HY/T 135-2010 Seabed based environmental monitoring platform

Professional Standard - Commodity Inspection, Automatic Lead Detection

SN/T 3196-2012 Determination of pathogenic vibrio in aquatic product.Automatic detection system for screening pathogenic bacteria
SN/T 0736.11-2002 Chemical analysis of fertilizers for import and export.Determination of nitrogen content by auto analyzer

Anhui Provincial Standard of the People's Republic of China, Automatic Lead Detection

DB34/T 3501-2019 Laboratory testing specification for automatic soil moisture sensor
DB34/T 2204-2014 Inspection specification for automation system of large and medium sluice projects
DB34/T 2381-2015 General technical specification for fully automatic motor vehicle headlamp tester by electronic screen method

Standard Association of Australia （SAA）, Automatic Lead Detection

AS 1735.1.3:2021 Lifts, escalators and moving walks, Part 1.3: Safety rules for the construction and installation of lifts — Examinations and tests — Design rules, calculations, examinations and tests of lift components
AS 1603.1:1997 Automatic fire detection and alarm systems - Heat detectors
AS 1603.13:1998 Automatic fire detection and alarm systems - Duct sampling units

ANSI - American National Standards Institute, Automatic Lead Detection

N15.37-1981 Automation of Nondestructive Assay Systems for Nuclear Materials Control@ Guide to (INMM)

Professional Standard - Chemical Industry, Automatic Lead Detection

HG/T 3175-2002 Fabrication and inspection method for High pressure urea equipment ultrasonic examination(UT) on the strip overlay welds of stainless steel

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Automatic Lead Detection

GB/T 35725-2017 General requirements for automatic testing system of power quality monitoring equipment

Beijing Provincial Standard of the People's Republic of China, Automatic Lead Detection

DB11/T 1164.8-2020 Urban Rail Transit Automatic Fare Collection System Technical Specifications Part 8: Testing

European Committee for Electrotechnical Standardization（CENELEC）, Automatic Lead Detection

EN IEC 63180:2020 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection

GM Europe, Automatic Lead Detection

GME 16958-2013 Mechanical Fasteners Acceptance Inspection for Automatic Applications
GME16553-2011 Schaltqualit盲t眉berpr眉fung f眉r Automatische Getriebe unter kalten Bedingungen im manuellen Mode Shiftquality Check for Automatic Transmissions under cold Conditions in manual Mode Revision 1; English/German; Includes Appendix A

JP-JEM, Automatic Lead Detection

JEM 1446-2008 Inspection of motor operated valve actuators used for nuclear power plant valves

AT-ON, Automatic Lead Detection

OENORM EN ISO 10893-8:2021 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd.1:2020) (consolidated version)
OENORM EN ISO 10893-2:2021 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd.1:2020) (consolidated version)
OENORM EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)

Jiangsu Provincial Standard of the People's Republic of China, Automatic Lead Detection

DB32/T 3762.19-2022 Technical Specifications for Novel Coronavirus Detection Part 19: Fully Automatic Nucleic Acid Rapid Integrated Detection

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Automatic Lead Detection

ITU-T L.207-2018 Passive node elements with automated ID tag detection (Study Group 15)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Automatic Lead Detection

GJB 6458.6-2008 Test method of rocket launcher. Part 6: Automatic operational aiming system test

卫生健康委员会, Automatic Lead Detection

WS/T 616-2018 Automated review of quantitative test results in clinical laboratories

Malaysia Standards, Automatic Lead Detection

MS 81 Pt.14-2002 Method of sampling and test for spices and condiments:Part 14:Determination of lead

Professional Standard - Navy, Automatic Lead Detection

HJB 381.9-2007 Yu-7B Torpedo Special Test Equipment Verification Regulations Part 9: SB211B·00TSJC (C) All mine automatic detection equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Automatic Lead Detection

ASHRAE 29 ERTA-2012 Method of Testing Automatic Ice Makers
ASHRAE 29-1988 Methods of Testing Automatic Ice Makers
ASHRAE 29-2009 Method of Testing Automatic Ice Makers
ASHRAE 29-2015 Method of Testing Automatic Ice Makers
ASHRAE 29 ERTA-2016 Method of Testing Automatic Ice Makers

NEMA - National Electrical Manufacturers Association, Automatic Lead Detection

NEMA IB 2-1974 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE
NEMA IB 2-1987 DETERMINATION OF CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR MOTIVE POWER SERVICE