ZH
RU
ES
Fragment test sample
Fragment test sample, Total:496 items.
In the international standard classification, Fragment test sample involves: Protection against dangerous goods, Plastics, Cutting tools, Protection against fire, Non-metalliferous minerals, Analytical chemistry, Metalliferous minerals, Pulps, Elements of buildings, Bottles. Pots. Jars, Raw materials for rubber and plastics, Edible oils and fats. Oilseeds, Insulating materials, Tea. Coffee. Cocoa, Glass, Products of the textile industry, Leather technology, Particle size analysis. Sieving, Wastes, Testing of metals, Iron and steel products, General methods of tests and analysis for food products, Paint ingredients, Meat, meat products and other animal produce, Materials and components for railway engineering, Water quality, Rubber, Construction materials, Products of the chemical industry, Paints and varnishes, Power stations in general, Refractories, Animal feeding stuffs, Fuels, Inorganic chemicals, Electrical and electronic testing, Ferroalloys, Thermodynamics and temperature measurements, Road vehicle systems, Materials and articles in contact with foodstuffs, Kitchen equipment, Pipeline components and pipelines, Wood, sawlogs and sawn timber, Adhesives, Footwear, Inks. Printing inks, Welding, brazing and soldering, Petroleum products in general, Pharmaceutics, Food products in general, Prepackaged and prepared foods, Fruits. Vegetables, Textile auxiliary materials, Aids for disabled or handicapped persons, Fertilizers, Lifting equipment, Sterilization and disinfection, Road engineering, Soil quality. Pedology, Non-ferrous metals, Microbiology, Farming and forestry, Paper and board, Rubber and plastics products, Ferrous metals, Coals, Machine tools, Environmental testing, Materials for aerospace construction, Lubricants, industrial oils and related products, Textile fibres, Milk and milk products, Air quality, Powder metallurgy, Products of non-ferrous metals, Mining and quarrying, Medical equipment, Corrosion of metals, Waxes, bituminous materials and other petroleum products.
海关总署, Fragment test sample
Canadian General Standards Board （CGSB), Fragment test sample
American Society for Testing and Materials (ASTM), Fragment test sample
- ASTM D4508-10 Standard Test Method for Chip Impact Strength of Plastics
- ASTM D6287-05 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D6287-98 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM E1388-17 Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
- ASTM E1387-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
- ASTM E1618-97 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM E1618-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM E1618-06e1 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM E1618-06 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM E1618-19 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM D4508-05 Standard Test Method for Chip Impact Strength of Plastics
- ASTM D4508-06 Standard Test Method for Chip Impact Strength of Plastics
- ASTM E1618-14 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM D3313-99 Standard Test Method for Carbon Black-Individual Pellet Hardness
- ASTM D7076-10 Standard Test Method for Measurement of Shives in Retted Flax
- ASTM D3313-12e1 Standard Test Method for Carbon Black&x2014;Individual Pellet Hardness
- ASTM E2881-13e1 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
- ASTM E2881-18 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
- ASTM A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM E1109-86(2004) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM E1109-86(1996) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM D480-88(1999) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- ASTM D5147-02ae1 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-01a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-97 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-01 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147/D5147M-18 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM E1386-23 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
- ASTM D480-88(2008) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- ASTM E2451-21 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
- ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
- ASTM D143-09 Standard Test Methods for Small Clear Specimens of Timber
- ASTM C562-91(2000) Standard Test Method for Moisture in a Graphite Sample
- ASTM E3062/E3062M-19 Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
- ASTM E3062/E3062M-20 Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
- ASTM E3062-16e1 Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
- ASTM E3062-16 Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
- ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
- ASTM D1485-86(1997)e1 Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
- ASTM E3332-22 Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
- ASTM E3332-23 Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
- ASTM C1140-03a Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM C1140-98 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM E1413-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
- ASTM E1413-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
- ASTM E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
- ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM C179-85(1999) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C179-14(2019) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM E3245-20 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
- ASTM E3245-20e1 Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
- ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM D7196-12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
- ASTM D7196-16 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
- ASTM D7196-18 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D143-94(2007) Standard Test Methods for Small Clear Specimens of Timber
- ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
- ASTM C562-23 Standard Test Method for Moisture in a Graphite Sample
- ASTM C561-23 Standard Test Method for Ash in a Graphite Sample
- ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
- ASTM E2489-06 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM E2489-06e1 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM E1618-10 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM D7000-04 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
- ASTM E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
- ASTM D7000-11(2017) Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
- ASTM D8182-18 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
- ASTM C1926-23 Standard Test Method for Measurement of Glass Dissolution Rate Using Stirred Dilute Reactor Conditions on Monolithic Samples
- ASTM D1769-77(1982)e1 Method of Test for Linear Density of Cotton Fibers (Array Sample)
- ASTM E1908-97 Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb)
- ASTM E1908-10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
- ASTM D3376-88(2000) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
- ASTM D7000-19 Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
- ASTM D7196-06 Standard Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
- ASTM D7000-19a Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
- ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
- ASTM B810-01a(2011) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
- ASTM D1059-97 Standard Test Method for Yarn Number Based on Short-Length Specimens
- ASTM D1059-01 Standard Test Method for Yarn Number Based on Short-Length Specimens
- ASTM D460-91(2005) Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
- ASTM E1077-01 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM D460-91(2014) Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
RU-GOST R, Fragment test sample
- GOST 22871-1977 Ground feldsparic and quartzfeldsparic materials. Rules of reception. Methods of sampling and sample preparation for testing
- GOST 26136-1984 Iron ores, concentrates, agglomerates and pellets. Methods of sampling and preparation of samples for physical tests
- GOST 938.30-1978 Leather. Test methods for brittleness and fragility
- GOST 7564-1997 Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
- GOST 7564-1973 Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
- GOST 8756.0-1970 Canned food products. Sampling and preparation of samples for test
- GOST 4288-1976 Culinary products and half-finished products of minced meat. Rules of acceptance and test methods
- GOST ISO 356-2014 Essential oils. Preparation of test samples
- GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- GOST 8179-1998 Refractory products. Sampling and acceptance testing
- GOST 8179-1985 Refractory products. Acceptance rules
- GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- GOST ISO 4044-2014 Leather. Chemical tests. Preparation of chemical test samples
- GOST 29287-1992 Sodium hydroxide for industrial use. Sampling. Test sample. Preparation the main solution for testing
- GOST R 52997-2008 Chrysotil. Acceptance rules, methods of sampling and preparation of samples for tests
- GOST R ISO 7881-1994 Rood vehicles. Brake linings. Evaluation of friction material characteristics. Small sample bench test procedure
- GOST 30432-1996 Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
- GOST 19730-1974 Talc and talcomagnesite. Method of sampling and sample preparation for laboratory testing
- GOST 28588.2-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 2. Chemical tests
- GOST 15113.0-1977 Food concentrates. Rules of acceptance, sampling and preparation of samples
- GOST 28741-1990 Potato food products. Acceptance, sample preparation and test methods
- GOST 28588.1-1990 Rubber, vulcanized. Preparation of samples and test pieces. Part 1. Physical tests
- GOST 33002-2014 Glass and glass products. Methods for determination of mechanical properties. Fragmentation test
- GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- GOST 17644-1983 Turf. Methods of sampling from deposit and preparation of samples for laboratory tests
- GOST ISO 17709-2013 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
- GOST ISO 6498-2014 Feeds, compound feeds. Preparation of samples for testing
- GOST 29188.0-1991 Perfumery and cosmetics. Acceptance rules, sampling and methods of organoleptic testing
- GOST 29188.0-2014 Perfume and cosmetic products. Acceptance rules, sampling, organoleptic test methods
- GOST 14363.4-1989 Pulp. Preparation of samples for physical and mechanical tests
- GOST 28106-2015 Copper cathodes. Sampling and preparation of samples and pieces for determination of electrical resistivity
- GOST R 55397-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Preparation of test samples
- GOST ISO 2419-2013 Leather. Physical and mechanical tests. Sample preparation and conditioning
NATO - North Atlantic Treaty Organization, Fragment test sample
- AOP-4496-2019 FRAGMENT IMPACT TEST PROCEDURES FOR MUNITIONS (ED A@ Ver 1)
Korean Agency for Technology and Standards (KATS), Fragment test sample
- KS M 7042-2001 METHOD OF TESTING DIRT, SHIVES AND SPECKS OF PAPER PULP
- KS L 2402-2015(2020) Testing methods for the fragment retention of carbonated beverage bottles
- KS K ISO 5089:2007 Textiles-Preparation of laboratory test samples and test specimens for chemical testing
- KS K ISO 5089:2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS K ISO 5089:2014 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS F ISO 9705:2009 Fire tests－Full-scale room test for surface products
- KS M ISO 4044:2007 Leather－Preparation of chemical test samples
- KS M ISO 4044:2017 Leather — Chemical tests — Preparation of chemical test samples
- KS D 0070-2002(2017) Method of test for magnetic properties of amorphous metals using single sheet specimen
- KS M ISO 4044-2017(2022) Leather — Chemical tests — Preparation of chemical test samples
- KS M ISO 4661-2:2009 Rubber, vulcanized-Preparation of samples and test pieces-Part 2:Chemical tests
- KS I ISO 5667-16-2009(2019) Water quality－Sampling－Part 16：Guidance on biotesting of samples
- KS B 5544-2003 Metallic materials－Charpy pendulum impact test－Part 3：Preparation andcharacterization of Charpy V reference test pieces for verification of test machines
- KS M ISO 4661-2:2020 Rubber, vulcanized — Preparation of samples and test pieces —Part 2: Chemical tests
- KS M ISO 1513:2012 Paints and varnishes－Examination and preparation of test samples
- KS K ISO 1957:2010 Machine-made textile floor coverings－Selection and cutting of specimens for physical tests
- KS H ISO 661-2007(2021) Animal and vegetable fats and oils－Preparation of test sample
- KS M ISO 11556:2009 Paper and board-Determination of curl using a single vertically suspended test piece
- KS D ISO 377:2002 Steel and steel products-Location and preparation of samples and test pieces for mechanical testing
- KS D ISO 377:2013 Steel and steel products－Location and preparation of samples and test pieces for mechanical testing
- KS E ISO 13909-8:2005 Hard coal and coke－Mechanical sampling－Part 8：Methods of testing for bias
- KS E ISO 13909-7:2005 Hard coal and coke－Mechanical sampling－Part 7：Methods for determining the precision of sampling, sample preparation and testing
- KS K ISO 13437-2007(2017) Geotextiles and geotextile-related products－Method for installing and extracting samples in soil, and testing specimens in laboratory
- KS M ISO 2160-2012(2017) Petroleum products－Corrosiveness to copper－Copper strip test
- KS E 3031-1977 Methods of sampling of rock and preparation of test piece for strength test
- KS E ISO 13909-7-2005(2020) Hard coal and coke－Mechanical sampling－Part 7：Methods for determining the precision of sampling, sample preparation and testing
- KS M ISO 4661-1-2002(2007) Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
- KS M ISO 3428:2002 Sodium fluoride for industridal use-Preparation and storage of test samples
- KS F 2350-2010 Method of sampling asphalt paving mixtures
- KS M ISO 3428:2013 Sodium fluoride for industridal use－Preparation and storage of test samples
American National Standards Institute （ANSI), Fragment test sample
PT-IPQ, Fragment test sample
Japanese Industrial Standards Committee (JISC), Fragment test sample
- JIS S 2306:1994 Method of fragment retention test for carbonated beverage bottles
- JIS K 6225:1998 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests
- JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
- JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
- JIS G 0416:1999 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
- JIS G 0416:2006 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
- JIS G 0416:2014 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
- JIS A 1158:2020 Method for reducing samples of aggregate to testing size
- JIS C 0043:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens
- JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
BE-NBN, Fragment test sample
Association Francaise de Normalisation, Fragment test sample
German Institute for Standardization, Fragment test sample
- DIN 10806:1992 Analysis of tea; preparation of ground sample of defined dry matter content
- DIN 10806:2016 Analysis of tea - Preparation of ground sample of defined dry matter content
- DIN 52331:1995 Testing of glass - Crushing and drying of samples for chemical analysis
- DIN 55996-1:2001 Paints and varnishes - Stone chip resistance test for coatings - Part 1: Multi impact test
- DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
- DIN EN ISO 664:2008-11 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008
- DIN 53859-5:1992 Testing of textiles; tear growth test on textile fabrics; trapezoid test
- DIN EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); English version of DIN EN ISO 664:2008-11
- DIN EN 1434-4:2007 Heat meters - Part 4: Pattern approval tests
English version of DIN EN 1434-4:2007-05
- DIN EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
- DIN 53281:2006 Testing of adhesively bonded joints - Preparation of test specimens
- DIN EN 12814-7:2003 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002
- DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
- DIN EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
- DIN EN 15002:2006 Characterization of waste - Preparation of test portions from the laboratory sample English version of DIN EN 15002:2006-05
- DIN EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version EN 15413:2011
- DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
- DIN 53534:2000 Testing of rubber - Determination of linear dimensions of test pieces and products
- DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
- DIN EN 12751:1999 Textiles - Sampling of fibres, yarns and fabrics for testing; German version EN 12751:1999
- DIN EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006); English version of DIN EN ISO 3785:2006-05
- DIN EN ISO 2160:1999 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998); German version EN ISO 2160:1998
International Organization for Standardization (ISO), Fragment test sample
- ISO 5089:1977 Textiles; Preparation of laboratory test samples and test specimens for chemical testing
- ISO 4661-1:1993 Rubber, vulcanized or thermoplastic; preparation of samples and test pieces; part 1: physical tests
- ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light
- ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- ISO 9705:1993 Fire tests; full-scale room test for surface products
- ISO 4044:2008 | IULTCS/IUC 3 Leather — Chemical tests — Preparation of chemical test samples
- ISO 4044:2017 | IULTCS/IUC 3 Leather — Chemical tests — Preparation of chemical test samples
- ISO 377-1:1989 Selection and preparation of samples and test pieces of wrought steels; part 1: samples and test pieces for mechanical test
- ISO 4661-2:1987 Rubber, vulcanized; Preparation of samples and test pieces; Part 2 : Chemical tests
- ISO 4661-2:2018 Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests
- ISO 7347:1987 Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation
- ISO 5022:1979 Shaped refractory products; Sampling and acceptance testing
- ISO 5502:1983 Oilseed residues — Preparation of test samples
- ISO 6498:1983 Animal feeding stuffs; Preparation of test samples
- ISO 4044:1977 Leather; Preparation of chemical test samples
- ISO 4661-1:1986 Rubber, vulcanized — Preparation of samples and test pieces — Part 1: Physical tests
- ISO 1513:1973 Title missing - Legacy paper document
- ISO 1513:1992 Paints and varnishes; examination and preparation of samples for testing
- ISO 10328-2:1996 Prosthetics - Structural testing of lower-limb prostheses - Part 2: Test samples
- ISO 20567-1:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
- ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
- ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
- ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
- ISO 2418:1972 Leather; Laboratory samples; Location and identification
- ISO 2418:2017 Leather - Chemical, physical and mechanical and fastness tests - Sampling location
- ISO 1957:1986 Machine-made textile floor coverings; Sampling and cutting specimens for physical tests
- ISO 1920-3:2004 Testing of concrete - Part 3: Making and curing test specimens
- ISO 7373:1987 Ferroalloys; Experimental methods for checking the precision of sample division
- ISO 2142:1981 Wrought aluminium, magnesium and their alloys; selection of specimens and test pieces for mechanical testing
- ISO 3100-2:1988 Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination
- ISO 9705:1993/Cor 1:1993 Fire tests; full-scale room test for surface products; technical corrigendum 1
- ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
- ISO 4648:1978 Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes
- ISO 230-12:2022 Test code for machine tools — Part 12: Accuracy of finished test pieces
- ISO 2160:1972 Petroleum products — Corrosiveness to copper — Copper strip test
- ISO 2160:1985 Petroleum products; Corrosiveness to copper; Copper strip test
- ISO 11556:2005 Paper and board - Determination of curl using a single vertically suspended test piece
- ISO 11556:1998 Paper and board - Determination of curl using a single vertically suspended test piece
- ISO 2106:1976 Title missing - Legacy paper document
- ISO 4489:1978 Sintered hardmetals; Sampling and testing
- ISO 21061:2021 Footwear — Chemical tests — General principles on the preparation of samples
- ISO 2106:2019 Footwear — Chemical tests — General principles on the preparation of samples
- ISO 24223:2021 Cheese - Guidance on sample preparation for physical and chemical testing
- ISO 13909-4:2001 Hard coal and coke - Mechanical sampling - Part 4: Coal; Preparation of test samples
- ISO 13909-4:2016 Hard coal and coke - Mechanical sampling - Part 4: Coal - Preparation of test samples
- ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- ISO 3428:1976 Sodium fluoride for industrial use; Preparation and storage of test samples
- ISO 1513:1980 Paints and varnishes — Examination and preparation of samples for testing
- ISO 11643:2009 | IULTCS/IUF 434 Leather — Tests for colour fastness — Colour fastness of small samples to solvents
- ISO/DIS 687:2023 Coke — Determination of moisture in the general analysis test sample
- ISO 2419:2002 | IULTCS/IUP 1 ET IULTCS/IUP 3 Leather — Physical and mechanical tests — Sample preparation and conditioning
- ISO 2419:2012 | IULTCS/IUP 1,IULTCS/IUP 3 Leather — Physical and mechanical tests — Sample preparation and conditioning
- ISO 13909-6:2001 Hard coal and coke - Mechanical sampling - Part 6: Coke; Preparation of test samples
- ISO 13909-6:2016 Hard coal and coke - Mechanical sampling - Part 6: Coke - Preparation of test samples
British Standards Institution (BSI), Fragment test sample
- BS EN ISO 5089:2016 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- BS EN 13892-1:2002 Methods of test for screed materials - Sampling, making and curing specimens for test
- BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
- BS ISO 4661-2:2018 Rubber, vulcanized. Preparation of samples and test pieces. Chemical tests
- BS EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
- DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
- BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- DD ENV 1402-2-1997 Unshaped refractory products. Sampling for testing
- BS EN 993-5:2018 Methods of test for dense shaped refractory products - Determination of cold crushing strength
- BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
- BS ISO 10328-2:1997 Prosthetics.Structural testing of lower-limb prostheses - Test samples
- BS EN ISO 1513:1995 Paints and varnishes - Examination and preparation of samples for testing
- BS EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
- BS PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
- BS 373:1957 Methods of testing small clear specimens of timber
- BS 3482-1:1991 Methods of test for desiccants - Sampling, and preparation and storage of test samples
- BS EN 993-5:2000 Methods of test for dense shaped refractory products - Determination of cold crushing strength
- BS EN 12390-2:2000 Testing hardened concrete - Making and curing specimens for strength tests
- BS EN ISO 1927-2:2012 Monolithic (unshaped) refractory products. Sampling for testing
- BS ISO 13909-7:2002 Hard coal and coke - Mechanical sampling - Methods for determining the precision of sampling, sample preparation and testing
- BS EN 60068-2-31:1993 Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens
- BS EN 3873:2011 Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces
- BS EN 3873:2010 Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces
- BS ISO 11556:2005 Paper and board - Determination of curl using a single vertically suspended test piece
- BS EN 12751:1999 Textiles - Sampling of fibres, yarns and fabrics for testing
- BS EN 1402-2:2003 Unshaped refractory products -
Part 2: Sampling for testing
- BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
- BS EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
- BS EN ISO 20567-3:2012 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a free-flying impact body
- BS EN 60068-2-50:2000 Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
- BS 5766-10:1999 Methods for analysis of animal feeding stuffs - Methods for analysis of animal feeding stuffs - Preparation of test samples
- BS EN ISO 2419:2012 Leather. Physical and mechanical tests. Sample preparation and conditioning
Taiwan Provincial Standard of the People's Republic of China, Fragment test sample
- CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
- CNS 14502-2001 Steel and steel products-Location and preparation of samples and test pieces for mechanical testing
- CNS 7631-1981 Method of Test for Surface Insulation Resistivity of Multi-Strip Specimens
- CNS 14917-2005 Method of preparing and testing specimens from shotcrete test panels
- CNS 15104-2007 Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2 : Determination of specimen breakdown
ES-AENOR, Fragment test sample
VN-TCVN, Fragment test sample
- TCVN 1749-1986 Woven fabrics.Sampling for testing
- TCVN 5347-1991 Graphite.Methods for sampling and preparation of samples for testing
- TCVN 7756-1-2007 Wood based panels.Test methods.Part 1: Sampling, Cutting of test pieces and expression of test results
- TCVN 5669-2013 Paints and varnishes.Examination and preparation of test samples
- TCVN 4833-2-2002 Meat and meat products.Sampling and preparation of test samples.Part 2: Preparation of test samples for microbiological examination
- TCVN 4787-2009 Methods of testing cement.Methods of taking and preparing samples of cement
- TCVN 4775-1989 Ores and concentrates of non-ferrous metals.Sampling and preparation of samples for laboratory tests
- TCVN 7190-2-2002 Refractories.Method for sampling.Part 2: Sampling and acceptance testing of shape products
- TCVN 4398-2001 Steel and steel products.Location and preparation of samples and test pieces for mechanical testing
- TCVN 3121-2-2003 Mortar for masonry.Test methods.Part 2: Sampling and preparation of sample
PL-PKN, Fragment test sample
- PN C99460-09-1986 Sampling of photographic light sensitive materials for testing Guide sampling of aerofilms
- PN C82055-08-1990 Test methods of pressed carbon products Determination of resistivity on samples
- PN P22101-1992 Leather Preparation of laboratory samples for tests
NL-NEN, Fragment test sample
- NEN 1960-1967 Testing of pulp. Sampling and preparation of sample
- NEN 2584-1986 Shaped refractory products - Sampling and acceptance testing
- NEN 3752-1979 Cheese - Physical and chemical test methods - Preparation of the sample
Professional Standard - Railway, Fragment test sample
HU-MSZT, Fragment test sample
RO-ASRO, Fragment test sample
- SR ISO 5089:1996 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- SR ISO 4044:1996 Leather - Preparation of chemical test samples
- STAS 6200/3-1981 NATURAL STONES FOR BUILDING Sampling, preparation of thin sections and test pieces
- STAS SR ISO 7373:1995 Ferroalloys - Experimental methods for checking the preclsion of sample division
- STAS 6343-1981 MTLK AND MII.K PRODUCTS Preparation of laboratory samples for analysis
ZA-SANS, Fragment test sample
- SANS 5089:1977 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- SANS 4661-2:2003 Rubber, vulcanized - Preparation of samples and test pieces Part 2: Chemical tests
- SANS 5861-3:2006 Concrete tests - Making and curing of test specimens
- SANS 904:2010 Leather - Chemical tests - Preparation of chemical test samples
- SANS 5001:1971 Sterility testing: sampling, criteria of compliance of a batch with sterility requirements
- SANS 174:1992 Paints and varnishes - Examination and preparation of samples for testing
- SANS 13909-4:2002 Hard coal and coke - Mechanical sampling Part 4: Coal - Preparation of test samples
- SANS 13909-6:2001 Hard coal and coke - Mechanical sampling Part 6: Coke - Preparation of test samples
- SANS 5860:2006 Concrete tests - Dimensions, tolerances and uses of cast test specimens
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fragment test sample
- GB/T 10629-2009 Textiles.Preparation of laboratory test samples and test specimens for chemical testing
- GB/T 10629-1989 Textiles--Proparation of laboratory test samples and test specimens for chemical testing
- GB/T 17783-1999 Rubber, vulcanized--Preparation of samples and test pieces--Chemical tests
- GB/T 2975-2018 Steel and steel products.Location and preparation of samples and test pieces for mechanical testing
- GB/T 2975-1998 Steel and steel products--Location and preparation of test pieces for mechanical testing
- GB/T 2007.3-1987 General rules for the sampling and sample preparation of minerals in bulk--Experimental method for evaluation of quality variation
- GB 2007.3-1987 General rules for sampling and sample preparation of bulk mineral products to assess quality fluctuation test method
- GB/T 5096-1985 Petroleum products--Corrosiveness to copper--Copper strip test
- GB/T 13268-1991 Atmospheric Air--Test Dust Standard Sample--Loess dust
- GB/T 13269-1991 Atmospheric Air--Test Dust Standard Sample--Fly Ash
- GB 13268-1991 Atmospheric test dust standard sample loess dust
- GB/T 6884-1986 Hardmetal products-Sampling and testing
- GB 13269-1991 Atmospheric test dust standard sample coal fly ash
- GB/T 32616-2016 Textiles.Tests for colour fastness.Instrumental assessment of change in colour for determination of grey scale rating
- GB/T 17469-1998 Road vehicles--Brake linings--Evaluation of friction material characteristics--Small sample bench test procedure
- GB/T 17469-2012 Characteristics evaluation of brake linings for automobile.Small sample bench test method
- GB/T 7321-1987 Rule of preparing sample for tests of dense shaped refractory products
- GB/T 13270-1991 Aemospheric air--Test dust standand sample--Simulated atmospheric dust
- GB 13270-1990 Atmospheric air—Test dust standard sample—Simulated atmospheric dust
- GB 13270-1991 Atmospheric test dust standard sample simulates atmospheric dust
- GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
- GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
- GB/T 18375.2-2001 Prosthetics--Structural testing of lower-limb prostheses--Part 2: Test samples
- GB/T 2423.35-2005 Environmental testing for electric and electronic products.Part 2:Tests Tests Z/AFc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
- GB/T 2423.36-2005 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
- GB/T 28371-2012 Ferroalloys.Experimental methods for checking the precision of sample division
- GB/T 16865-1997 Test pieces for tensile test for wrought aluminum and magnesium alloy products
KR-KS, Fragment test sample
- KS K ISO 5089-2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS M ISO 4661-2-2020 Rubber, vulcanized — Preparation of samples and test pieces —Part 2: Chemical tests
Danish Standards Foundation, Fragment test sample
- DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- DS/EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples
- DS/ISO 4661-1:1989 Rubber, vulcanized. Preparation of samples and test pieces. Part 1: Physical tests
- DS/ISO 4661-2:1990 Rubber, vulcanized. Preparations of samples and test pieces. Part 2: Chemical tests
- DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- DS/ISO 1513:1984 Paints and varnishes. Examination and preparation of samples for testing
- DS 423.21:1984 Testing of concrete, Making and curing of moulded test specimens for strength tests
- DS/EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- DS/EN ISO 2160:1999 Petroleum products - Corrosiveness to copper - Copper strip test
- DS 927:1955 Textile testing. Sampling, standard atmosphere for testing and statistical interpretation of the test results
- DS/EN ISO 11643:2009 Leather - Tests for colour fastness - Colour fastness of small samples to solvents
- DS/EN ISO 2419:2012 Leather - Physical and mechanical tests - Sample preparation and conditioning
NO-SN, Fragment test sample
- NS 3541-1987 Flexible sheets - Tear test using trapezoidal test specimen
- NS 3540-1987 Flexible sheets - Tear test using rectangular test specimen
National Metrological Verification Regulations of the People's Republic of China, Fragment test sample
- JJG 405-1986 Verification Regulation of the Standard Specimen of Magnetic Sheet and Strip
Lithuanian Standards Office , Fragment test sample
- LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- LST EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- LST 1613-2000 Fish and fishery products. Acceptance rules, sampling methods and preparation of test samples
Professional Standard - Electricity, Fragment test sample
- DL/T 1339-2014 Performance test code on crushing-dividing combined sample preparation equipment at coal-fired power plants
Standard Association of Australia （SAA）, Fragment test sample
European Committee for Standardization (CEN), Fragment test sample
- EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
- EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
- EN 1067:2005 Adhesives - Examination and preparation of samples for testing
- EN 1067:1997 Adhesives - Examination and Preparation of Samples for Testing
- EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples
- EN 10045-1:1990 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
- EN 3873:2010 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
- EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens
- EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
- EN 21513:1991 Paints and varnishes; examination and preparation of samples for testing (ISO 1513:1980)
- EN ISO 1513:1994 Paints and Varnishes - Examination and Preparation of Samples for Testing (ISO 1513:1992)
- EN ISO 24223:2021 Cheese - Guidance on sample preparation for physical and chemical testing (ISO 24223:2021)
- EN ISO 21061:2021 Footwear - Chemical tests - General principles on the preparation of samples (ISO 21061:2021)
- EN 12751:1999 Textiles - Sampling of fibres, yarns and fabrics for testing
- EN ISO 3785:1995 Steel - Designation of Test Piece Axes (ISO 3785:1976)
- EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- EN 196-7:1989 Methods of testing cement; methods of taking and preparing samples of cement
CZ-CSN, Fragment test sample
NZ-SNZ, Fragment test sample
- NZS 4407.3.10:1991 Methods of sampling and testing road aggregates Test 3.10 The crushing resistance of coarse aggregate under a specific load
IN-BIS, Fragment test sample
AENOR, Fragment test sample
- UNE-EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- UNE 103400:1993 SIMPLE COMPRESSION RUPTURE TEST IN SOIL TEST SPECIMENS.
- UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- UNE-EN ISO 5089:2017 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
IT-UNI, Fragment test sample
未注明发布机构, Fragment test sample
SE-SIS, Fragment test sample
- SIS SS-ISO 5089:1990 Textiles — Preparation of laboratory test samples and test specimens for chemical testing.
- SIS SS 25 12 15-1981 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- SIS SS 83 25 10-1982 Machine-made textile floor coverings -Sampling and cutting specimens for physical tests
- SIS SS-ISO 1957:1989 Machine-made textile floor coverings — Sampling and cutting specimens for physical tests
- SIS SS 19 10 12-1992 Animal feeding stuffs, chemical examination — Preparation of test samples
Military Standard of the People's Republic of China-General Armament Department, Fragment test sample
- GJB 9704-2020 Test method for impact characteristics of spacecraft space debris protective materials and protective structures
Professional Standard - Light Industry, Fragment test sample
BG-BDS, Fragment test sample
工业和信息化部, Fragment test sample
CEN - European Committee for Standardization, Fragment test sample
- PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fragment test sample
- GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test
Professional Standard - Agriculture, Fragment test sample
- GB 5096-1985 Petroleum products copper strip corrosion test method
ET-QSAE, Fragment test sample
BR-ABNT, Fragment test sample
TR-TSE, Fragment test sample
- TS 3085-1978 MACHINE — MADE TEXTILE FLOOR COVERINGS — SAMPLING AND CUTTING SPECIMENS FOR PHYSICAL TESTS
- TS 3068-1978 Making And Curing Concrete Test Specimens In The Laboratory
- TS 2485-1976 SODIUM FLUORIDE FOR INDUSTRIAL USE PREPARATION AND STORAGE OF TEST SAMPLES
国家市场监督管理总局、中国国家标准化管理委员会, Fragment test sample
- GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
AT-ON, Fragment test sample
Group Standards of the People's Republic of China, Fragment test sample
AASHTO - American Association of State Highway and Transportation Officials, Fragment test sample
- T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
- T 328-2005 Standard Method of Test for Reducing Samples of Hot-Mix Asphalt to Testing Size
Professional Standard - Non-ferrous Metal, Fragment test sample
- YS/T 3002-2012 Specification of sample preparation for gold-bearing ore
Professional Standard - Geology, Fragment test sample
- DZ/T 0372-2021 Specification for sample preparation of solid mineral dressing and smelting test
ES-UNE, Fragment test sample
- UNE-EN 993-5:2018 Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength (Endorsed by Asociación Española de Normalización in January of 2019.)
FI-SFS, Fragment test sample
KE-KEBS, Fragment test sample
- KS 08-126 Pt.2-1978 KENYA STANDARD METHODS FOR PREPARING LABORATORY TEST SAMPLES AND TEST SPECIMENS OF TEXTILE MATERIALS FOR CHEMICAL TESTS PART 2. METHODS FOR SAMPLING COTTON FABRICS FOR CHEMICAL TESTS
Indonesia Standards, Fragment test sample
- SNI ISO 2419:2012 Leather - Physical and mechanical tests - Sample preparation and conditioning
Professional Standard - Ferrous Metallurgy, Fragment test sample
- YB 4015-1991 Specimens for the test of refractory products used in glass melting cellars