ZH
RU
ES

Elasticity and Rigidity

Elasticity and Rigidity, Total:348 items.

In the international standard classification, Elasticity and Rigidity involves: Plastics, Sports equipment and facilities, Cutting tools, Wood, sawlogs and sawn timber, Raw materials for rubber and plastics, Continuous handling equipment, Protection of and in buildings, Ceramics, Aircraft and space vehicles in general, Wood-based panels, Insulating materials, Cellular materials, Acoustics and acoustic measurements, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Surface treatment and coating, Gas and steam turbines. Steam engines, Vibrations, shock and vibration measurements, Products of the textile industry, Non-textile floor coverings, Woodworking equipment, Pipeline components and pipelines, Rubber, Testing of metals, Test conditions and procedures in general, Radiocommunications, Company organization and management, Equipment for the chemical industry, Magnetic materials, Metrology and measurement in general, Dentistry, Printed circuits and boards, Components and accessories for telecommunications equipment, Road vehicle systems, Glass, Tyres, Software development and system documentation, Products of the chemical industry, Shafts and couplings, Components for aerospace construction, Fibre optic communications, External sewage systems, Elements of buildings, Paper and board, Materials for aerospace construction, Aerospace fluid systems and components.

Danish Standards Foundation, Elasticity and Rigidity

DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS 434.5:1989 Lightweight aggregate concrete components. Determination of modules of elasticity
DS 433.5:1989 Aerated lightweight concrete components. Modules of elasticity
DS 423.25:1984 Testing of concrete. Hardened concrete. Modulus of elasticity
DS-håndbog 169:2012 Underground Drains and Sewer systems - Laying of rigid and flexible pipelines
DS/EN 62329-3-102:2011 Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
DS/ISO 18437-4:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 4: Dynamic stiffness method
DS/EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
DS/EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
DS/EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
DS/EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
DS/EN 13893:2003 Resilient, laminate and textile floor coverings - Parameters for the measurement of dynamic coefficient of friction on dry floor surfaces
DS/ISO/TS 22332:2021 Security and resilience – Business continuity management systems – Guidelines for developing business continuity plans and procedures
DS 3001:2009 Organizational resilience: Security, preparedness, and continuity management systems - Requirements with guidance for use
Samkoeb-2012 Code of Practice for trenching for underground pipes and cables +Underground Drains and Sewer systems - Laying of rigid and flexible pipelines
DS/EN ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments

ESDU - Engineering Sciences Data Unit, Elasticity and Rigidity

ESDU 78043 A-2013 Single disc springs – elastic deflections@ stresses@ stiffnesses and resiliences
ESDU 78043 A-1979 Single disc springs - elastic deflections@ stresses@ stiffnesses and resiliences.
ESDU 83035 E-1994 Estimation of the stiffnesses and apparent elastic properties of laminated flat plates.
ESDU 83035 F-2012 Estimation of the stiffnesses and apparent elastic properties of laminated flat plates
ESDU 83035 E-2011 Estimation of the stiffnesses and apparent elastic properties of laminated flat plates
ESDU 88035 B-1994 Maximum inelastic bending moments and form factors for symmetric bending of beams.
ESDU 89048-1989 Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
ESDU 09014-2009 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 09014 A-2013 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 69020 C-1993 Elastic stress concentration factors. Geometric discontinuities in flat bars or strips of isotropic materials.
ESDU 80027 C-1995 Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
ESDU 79008-1979 Elastic stress concentration factors. Rectangular notch in the edge of a wide flat plate in tension.
ESDU 75033-1975 Elastic stress concentration factors. Double radius fillets in shouldered shafts in torsion.
ESDU 77003-1977 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; all edges clamped (isotropic face plates and orthotropic cores of zero flexural stiffness).
ESDU 76022-1976 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; long edges clamped@ short edges simply-supported (isotropic face plates and orthotropic cores of zero flexural stiffness).
ESDU 76013-1976 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; all edges simply-supported (isotropic face plates and orthotropic cores of zero flexural stiffness).

Association Francaise de Normalisation, Elasticity and Rigidity

NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
NF EN 15702:2009 Plastiques alvéolaires - Mode opératoire de dénombrement des alvéoles des polyuréthanes souples et rigides
NF EN ISO 22301:2019 Sécurité et résilience - Systèmes de management de la continuité d'activité - Exigences
NF EN 4840-102:2019 Série aérospatiale - Manchons thermorétractables - Partie 102 : semi-rigides en élastomère, plage de températures de -75 oC à 150 oC - Norme de produit
NF S31-030-5*NF EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5 : driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
NF T56-128:1977 Rigid rubber or plastics based cellular materials. Determination of the mean coefficient of linear construction.
NF EN ISO 10846-3:2002 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 3 : méthode indirecte pour la détermination de la raideur dynamique en translation des supports élastiques
NF EN ISO 10846-2:2008 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 2 : méthode directe pour la détermination de la raideur dynamique en translation des supports élastiques
NF EN ISO 10846-4:2004 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 4 : raideur dynamique en translation des éléments autres que les supports élastiques
NF P62-127*NF EN 13893:2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces.
NF EN 62329-3-102:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 102 : profilés thermorétractables en élastomère, semi-rigides - Exigences relatives aux...
NF L53-153-102*NF EN 4840-102:2019 Aerospace series - Heat shrinkable moulded shapes - Part 102 : elastomeric, semi-rigid, temperature range -75 to 150 oC - Product Standard
NF X52-313*NF EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301
NF EN ISO 22313:2020 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices sur l'utilisation de l'ISO 22301
NF C93-649-3-102*NF EN 62329-3-102:2010 Heat-shrinkable moulded shapes - Part 3 : specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102 : Heat-shinkable elastomeric moulded shapes, semi-rigid, material requirements and system performanc
NF EN ISO 10846-5:2009 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 5 : méthode du point d'application pour la détermination de la raideur dynamique de transfert basse fréquence en t...
XP Z74-313*XP ISO/TS 22318:2022 Security and resilience - Business continuity management systems - Guidelines for supply chain continuity management
XP ISO/TS 22318:2022 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices pour le management de la continuité de la chaîne d'approvisionnement
XP Z74-311*XP ISO/TS 22317:2022 Security and resilience - Business continuity management systems - Guidelines for business impact analysis
XP ISO/TS 22317:2022 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices pour le bilan d'impact sur l'activité
NF ISO 19940:2018 Procédure d'essai de l'indice de rigidité de pneumatiques à mobilité étendue et pour roulage à plat pour voiture particulière
NF T56-118:1980 Rigid cellular products with rubber or plastic base. Shearing test. Determination of apparent shearing coefficient.
NF R95-406:1975 Systèmes de freinage à réservé d'énergie - Raccordements à vis-raccord et garnitures élastiques
NF T56-129:2003 Rigid cellular plastics - Determination of volume percentage of open cells and closed cells.
NF T56-129*NF EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
NF P18-579:2013 Granulats - Détermination des coefficients d'abrasivité et de broyabilité
NF T57-224:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.
FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
NF S91-105-4*NF EN ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Part 4 : specific characteristics of diamond instruments
NF P16-501*NF EN 16506:2014 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
NF R12-717*NF ISO 19940:2018 Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres
NF EN ISO 13753:2008 Vibrations et chocs mécaniques - Vibrations mains-bras - Méthode pour mesurer le facteur de transmission des vibrations par les matériaux résilients chargés par le système main-bras

(U.S.) Plastic Pipe Association, Elasticity and Rigidity

PPI TN-19-2005 Resistance to Ring Bending ?Pipe Stiffness (PS), Ring Stiffness Constant (RSC) and Flexibility Factor (FF) for Buried Gravity Flow Pipes

Military Standard of the People's Republic of China-General Armament Department, Elasticity and Rigidity

GJB 540.8-1988 Airborne Missile Strength and Stiffness Specification Aeroelastic Instabilities
GJB 67.7-1985 Military Aircraft Strength and Stiffness Specification Aeroelastic Instabilities
GJB 5435.8-2005 Specification for unmanned aerial vehicles strength and rigidity Part 8: Aeroelastic instabilities
GJB 332-1987 Test method for average linear expansion coefficient of rigid solids
GJB 10013-2021 Test method for error coefficient of ballistic missile inertial platform
GJB 540.7-1991 Airborne Missile Strength and Stiffness Specification Reliability Requirements and Repeated Loading
GJB 720.5-1989 Military Helicopter Strength and Stiffness Specification Vibration, Mechanical and Aeroelastic Instabilities
GJB 1802-1993 Test method for average linear expansion coefficient of low expansion rigid solid materials
GJB 3315A-2021 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
GJB 3315-1998 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
GJB 2153A-2018 Specification for high stable low frequency temperature coefficient constant elastic alloys
GJB 2153-1994 Specification for high stable low frequency temperature coefficient constant elastic alloys
GJB 1909.9-1994 Equipment reliability and maintainability parameter selection and indicator determination requirements for ammunition
GJB 1130-1991 General requirements for reliability and maintainability of aircraft ejection life-saving systems

IT-UNI, Elasticity and Rigidity

UNI 6794-1971
UNI 6800-1971
UNI 6799-1971
UNI 3263-1952
UNI 3261-1952
UNI 3262-1952
UNI 3746-1958
UNI 6803-1971
UNI 7898-1978
UNI 6556-1976 Tests of concretes. Determination of static modulus of elasticity in compression.
UNI 5635-1974
UNI 6075-1967
UNI 6481-1969

AIA/NAS - Aerospace Industries Association of America Inc., Elasticity and Rigidity

NASM24374-1998 Casters@ Rigid and Swivel@ Precision Spring Mounted
NASM24374-2019 CASTERS@ RIGID AND SWIVEL@ PRECISION SPRING MOUNTED (Rev 2)
NASM24374-2012 CASTERS@ RIGID AND SWIVEL@ PRECISION SPRING MOUNTED (Rev 1)

Society of Automotive Engineers (SAE), Elasticity and Rigidity

SAE RS-684-1-1969 RS684 Spring Clips and Bushes for use with Rigid Tubes
SAE ARINC738A-1-2001 AIR DATA AND INERTIAL REFERENCE SYSTEM (ADIRS)

American Society for Testing and Materials (ASTM), Elasticity and Rigidity

ASTM F2845-14 Standard Test Method for Measuring the Dynamic Stiffness 40;DS41; and Cylindrical Coefficient of Restitution 40;CCOR41; of Baseballs and Softballs
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D4582-23 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
ASTM F2845-11 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ASTM D4582-91(1996) Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
ASTM D4582-05 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM D6835-08(2014) Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials 40;TEEE41;
ASTM D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
ASTM D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM F3311-19 Standard Practice for Mat Bond Evaluation of Performance and Compatibility for Resilient Flooring System Components Prior to Installation
ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)

The American Road & Transportation Builders Association, Elasticity and Rigidity

AASHTO DIVISION I-A 3.6 Elastic Seismic Response Coefficient

AASHTO - American Association of State Highway and Transportation Officials, Elasticity and Rigidity

DIVISION I-A 3.6-1996 Elastic Seismic Response Coefficient

Aerospace Industries Association, Elasticity and Rigidity

AIA NASM24374-1998 Casters, Rigid and Swivel, Precision Spring Mounted FSC 5340

Institute of Electrical and Electronics Engineers (IEEE), Elasticity and Rigidity

Digital Resilience IC Activity: Sustainable, Secure, and Inclusive Digital Resilience (DR) Digital Resilience IC Activity: Sustainable, Secure, and Inclusive Digital Resilience (DR)
Digital Resilience IC Activity: Sustainable, Secur Digital Resilience IC Activity: Sustainable, Secure, and Inclusive Digital Resilience (DR)
IEEE Std 178-1958*ANSI C83.23-1960 IEEE Standards on Piezoelectric Crystals:Determination of The Elastic. Piezoelectric and Dielectric Constants- The Electro mechanical Coupling Factor, 1958

Professional Standard - Aerospace, Elasticity and Rigidity

QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
QJ 970-1986 Rigid solid average linear expansion coefficient test method
QJ 1805-1989 Guidance on data collection and management of reliability and maintainability of aeronautical missile weapon systems
QJ 2730-1995 Ballistic missile and launch vehicle control system polarity regulations
QJ 1830-1990 Strategic Missile System Reliability Data Acquisition Card and Filling Specifications
QJ 1408-1988 可靠性
QJ 1408-1994 可靠性
QJ 2932-1997 Guidelines for Safety Review of Spacecraft and Missile Weapon Systems

RU-GOST R, Elasticity and Rigidity

GOST 12489-1971 Solid counterbores. Types and basic dimensions
GOST 21523.9-1987 Modified wood. Method for determination of modulus of elasticity in tension
GOST 21523.7-1987 Modified wood. Method for determination of modulus of elasticity in static bending
GOST 21554.1-1981 Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending
GOST 21523.8-1993 Modified wood. Method for determination of modulus of elasticity in compression
GOST 21523.8-1987 Modified wood. Method for determination of modulus of elasticity in compression
GOST 16483.9-1973 Wood. Methods for determination of modulus of elasticity in static bending
GOST 10201-1975 Rubber and rubber compounds. Method for determination of stiffness and elastic recovery by means of Defo-plastometer
GOST 22346-1977 Flexible cellular plastics. Method for the determination cold-resistance
GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
GOST 9623-1987 Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
GOST 24452-1980 Concretes. Methods of prismatic compressive strength, modulus of elasticity and Poisson's ratio determination
GOST 16483.24-1973 Wood. Determination method of modulus of elasticity in compression along fibres
GOST 16483.25-1973 Wood. Determination method of modulus of elasticity in commpression across fibres
GOST R ISO 18437-4-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 4. Dynamic stiffness method
GOST R 50062-1992 Woodworking equipment. Thicknessing machines. Basic parameters. Norms of accuracy and rigidity
GOST R 55043-2012 Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements
GOST 15180-1986 Flexible flat gaskets. Main parameters and dimensions
GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction
GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
GOST R ISO 6360-4-2012 Dentistry. Number coding system for rotary instruments. Part 4. Specific characteristics of diamond instruments
GOST 23404-1986 Lightweight enclosure panels with foam plastic thermal insulation. Method of determining modulus of elasticity and shear modulus of foam plastic
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
GOST R 55951-2014 Modified wood. Method for determining the wear resistance and friction coefficient

American National Standards Institute （ANSI), Elasticity and Rigidity

ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
ANSI/ASTM F2845:2011 Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ANSI/ASIS SPC.2-2014 Auditing Management Systems:Risk, Resilience, Security, and Continuity - Guidance for Application
ANSI/ABMA/ISO 14203:1998 Aerospace - Airframe ball bearings, single row, rigid, diameter series 8 and 9 - Metric series
ANSI/ABMA/ISO 14202:1998 Aerospace - Airframe ball bearings, single row, rigid, diameter series 0 and 2 - Metric series

International Organization for Standardization (ISO), Elasticity and Rigidity

ISO 9856:2003/Amd 1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus; Amendment 1
ISO 28000:2022 Security and resilience — Security management systems — Requirements
ISO/TS 22318:2021 Security and resilience — Business continuity management systems — Guidelines for supply chain continuity management
ISO 19940:2017 Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres
ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary
ISO 4863:1984 Resilient shaft couplings; Information to be supplied by users and manufacturers
ISO/TS 22317:2021 Security and resilience — Business continuity management systems — Guidelines for business impact analysis
ISO/FDIS 22376 Security and resilience — Authenticity, integrity and trust for products and documents — Specification and usage of Visible Digital Seal (VDS) data format for authentication, verification and acquisition of data carried by a document or object
ISO 22376:2023 Security and resilience — Authenticity, integrity and trust for products and documents — Specification and usage of visible digital seal (VDS) data format for authentication, verification and acquisition of data carried by a document or object
ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
ISO 14203:1998 Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series
ISO 1827:2011 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
ISO 1827:2016 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods

Aerospace Industries Association/ANSI Aerospace Standards, Elasticity and Rigidity

AIA/NAS NASM24374-2012 CASTERS, RIGID AND SWIVEL, PRECISION SPRING MOUNTED (Rev 1)

CZ-CSN, Elasticity and Rigidity

CSN 49 0124-1980 Resonant method for determination of modulus of elasticity and of tho loga- rithmic decrement of vibration
CSN 64 0282-1978 Determination of the permeability and urbidity coefficient

Group Standards of the People's Republic of China, Elasticity and Rigidity

T/CSTM 00392-2021 Test method for resilience factor of resilient blanket for LNG storage tank
T/SBX 046-2021 Method for Determination of Elastic Coefficient of Nematic Thermotropic Liquid Crystal

GM Global, Elasticity and Rigidity

GMW 16973-2013 Coefficient of Linear Thermal Expansion (CLTE) for Elastomers Issue 1; English
GMW 14738-2013 Master Test Procedure for Determination of Dynamic Stiffness and Loss Angle of Elastomeric Components Issue 2; English
GMW 16666-2011 Coefficient of Friction Measurement for Elastomers Issue 1; English

Taiwan Provincial Standard of the People's Republic of China, Elasticity and Rigidity

CNS 12702-1990 Method of Test for Flastic Modulus of High Performance Ceramics

Professional Standard - Ferrous Metallurgy, Elasticity and Rigidity

YB/T 5244-1993 Positive temperature coefficient constant elastic alloy 3J63

Korean Agency for Technology and Standards (KATS), Elasticity and Rigidity

KS W 0623-2002(2012) AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
KS W 0623-1987 AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
KS W 0623-1982 AIRPLANE STRENGTH AND RIGIDITY, FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES
KS I ISO 10846-4:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
KS M ISO 4897-2002(2022) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS M ISO 4897-2002(2017) Cellular plastics－Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
KS B ISO 18437-4:2019 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
KS A ISO 22301:2022 Security and resilience — Business continuity management systems — Requirements
KS I ISO 10846-3:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 3: Indirect method for determination of the dynamic stiffness of resilient supports f
KS W 0623-2002 Airplane strength and rigidity, flutter, divergence,and other aeroelastic instabilities
KS I ISO 10846-2:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 2: Direct method for determination of the dynamic stiffness of resilient supports for
KS I ISO 10846-5:2019 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of
KS F 2868-2003 Determination of dynamic stiffness of materials used under floating floors in dwellings
KS B ISO 4863:2014 Resilient shaft couplings-Information to be supplied by users and manufacturers
KS F 2376-2001 Testing method for indirect tension test for resilient modulus of bituminous mixtures
KS P ISO 6360-4:2009 Dentistry－Number coding system for rotary instruments－Part 4：Specific characteristics of diamond instruments
KS W ISO 14202-2004(2014) Aerospace－Airframe ball bearings, single-row, rigid,diameter series 0 and 2－Metric series
KS W ISO 14203-2004(2014) Aerospace－Airframe ball bearings, single-row,rigid, diameter series 8 and 9－Metric series

German Institute for Standardization, Elasticity and Rigidity

DIN EN 15702:2009-04 Cellular Plastics - Cell count procedure for flexible and rigid polyurethane; German version EN 15702:2008
DIN EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version EN
DIN EN ISO 22301:2020-06 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019); German version EN ISO 22301:2019
DIN EN 4840-102:2020-10 Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard; German and English version EN 4840-102:2019
DIN EN 13893:2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces; German version EN 13893:2002
DIN 14334:2020 Solid couplings Storz System PN 16 for delivery and suction
DIN EN 4840-102:2020 Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 ？C - Product Standard; German and English version EN 4840-102:2019
DIN ISO 1827:2010 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods (ISO 1827:2007)
DIN EN ISO 10846-4:2004-02 Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-...
DIN EN ISO 22301:2020 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019)
DIN ISO 28000:2023-11 Security and resilience - Security management systems - Requirements (ISO 28000:2022)
DIN EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
DIN EN ISO 10846-3:2003-06 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version...
DIN EN ISO 10846-5:2009-07 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 1084...
DIN EN ISO 10846-2:2008-11 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008); German vers...
DIN EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020)
DIN EN ISO 22313:2020-10 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020); German version EN ISO 22313:2020
DIN 13343:1994 Linear viscoelastic materials; concepts, constitutive equations, basic functions
DIN ISO 28000:2021-04 Security and resilience - Security management systems - Requirements for the supply chain (ISO/DIS 28000:2021); Text in German and English / Note: Date of issue 2021-03-19*Intended as replacement for DIN ISO 28000 (2015-08).
DIN EN ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004); German version EN ISO 6360-4:2004
DIN 6113-1:2010-08 Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 1: General
DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN 13893:2003-02 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces; German version EN 13893:2002
DIN 65271:2002 Aerospace series - Elastomeric semi-finished products and parts - Technical specification
DIN EN 16506:2014-12 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL); German version EN 16506:2014
DIN EN 3056:1994-06 Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994
DIN 6113-2:2010-08 Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 2: Non-removable head (tight head) steel drum and removable head (open head) steel drum with plug/bung closure sys...
DIN 6113-5:2010-08 Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 5: Non-removable head (tight head) plastics drum and removable head (open head) plastics drum with plug/bung closu...
DIN EN IEC 61189-2-501:2020-12 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Fact...

PL-PKN, Elasticity and Rigidity

PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
PN D04118-1959 Physical and mechanical properties of wood -- Determination of modulus of elasticity in tension parallel to grain
PN-EN ISO 22301-2020-04 P Security and resilience -- Business continuity management systems -- Requirements (ISO 22301:2019)
PN D04117-1963 Physical and mechanical properties ol ?imber. Determination of the mo- dulus of etasticity at static bending
PN C04592-1972 Water and waste water , Determination coefficient of stability and thermostability of water

Japanese Industrial Standards Committee (JISC), Elasticity and Rigidity

JIS W 0613:1979 Airplane strength and rigidity, flutter, divergence, and other aero elastic instabilities
JIS K 6378:2010 Light conveyor belts -- Determination of the relaxed elastic modulus
JIS H 8454:2010 Testing method for longitudinal elastic modulus of thermal barrier coatings
JIS Q 22313:2021 Security and resilience -- Business continuity management systems -- Guidance on the use of ISO 22301
JIS K 7213:1995 Determination of shear modulus and mechanical damping of plastics by means of torsion pendulum

PT-IPQ, Elasticity and Rigidity

NP EN 310-2002 Wood-based panels Determination of modulus of elasticity in bending and of bending strength

British Standards Institution (BSI), Elasticity and Rigidity

BS EN 62329-3-102:2011 Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
BS EN 62329-3-102:2010 Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
BS EN 4840-102:2019 Aerospace series. Heat shrinkable moulded shapes. Elastomeric, semi-rigid, temperature range -75 to 150 °C. Product Standard
BS EN ISO 10846-3:2002 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements -Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
18/30375299 DC BS EN 4840-102. Aerospace series. Heat shrinkable moulded shapes. Part 102. Elastomeric, semi-rigid, temperature range -75 to 150$0DC
BS EN ISO 22301:2019 Tracked Changes. Security and resilience. Business continuity management systems. Requirements
BS EN ISO 22313:2020 Security and resilience. Business continuity management systems. Guidance on the use of ISO 22301
19/30379712 DC BS EN ISO 22313. Security and resilience. Business continuity management systems. Guidance
PD ISO/TS 22331:2018 Security and resilience. Business continuity management systems. Guidelines for business continuity strategy
BS ISO 28000:2022 Tracked Changes. Security and resilience. Security management systems. Requirements
BS 6404-13:1996 Magnetic materials - Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS EN ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Specific characteristics of diamond instruments
BS 123100-003:2001 System of quality assessment - Capability detail specification - Rigid single-sided and double-sided printed boards with plain holes
BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic data and methods of test
PD ISO/TS 22330:2018 Security and resilience. Business continuity management systems. Guidelines for people aspects of business continuity
PD ISO/TS 22332:2021 Security and resilience. Business continuity management systems. Guidelines for developing business continuity plans and procedures
PD ISO/TS 22318:2021 Tracked Changes. Security and resilience. Business continuity management systems. Guidelines for supply chain continuity management
21/30412869 DC BS ISO 28000. Security and resilience. Security management systems. Requirements for the supply chain
PD ISO/TS 22317:2021 Tracked Changes. Security and resilience. Business continuity management systems. Guidelines for business impact analysis
BS EN 1448:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
BS EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
BS ISO 22376:2023 Security and resilience. Authenticity, integrity and trust for products and documents. Specification and usage of visible digital seal (VDS) data format for authentication, verification and acquisition of data carried by a document or object
BS ISO 19940:2017 Tyre stiffness index testing procedure for passenger car extended mobility and run flat tyres
BS 123100:2001 System of quality assessment - Sectional specification - Rigid single-sided and double-sided printed boards with plain holes
BS ISO 22328-3:2023 Security and resilience. Emergency management - Guidelines for the implementation of a community-based early warning system for tsunamis

GOSTR, Elasticity and Rigidity

GOST 22346-2017 Cellular flexible plastics. Method for determination cold-resistance

KR-KS, Elasticity and Rigidity

KS I ISO 10846-4-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
KS B ISO 18437-4-2019 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
KS A ISO 22301-2022 Security and resilience — Business continuity management systems — Requirements
KS I ISO 10846-3-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 3: Indirect method for determination of the dynamic stiffness of resilient supports f
KS I ISO 10846-2-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 2: Direct method for determination of the dynamic stiffness of resilient supports for
KS I ISO 10846-5-2019 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of

ES-AENOR, Elasticity and Rigidity

UNE 22-950 Pt.3-1990

ES-UNE, Elasticity and Rigidity

UNE-EN ISO 22301:2020 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019)
UNE-EN 62329-3-102:2010 Heat-shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system perfor...
UNE-EN 4840-102:2019 Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard (Endorsed by Asociación Española de Normalización in January of 2020.)
UNE-ISO/TS 22331:2020 Security and resilience — Business continuity management systems — Guidelines for business continuity strategy
UNE-EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020)
UNE-ISO/TS 22330:2020 Security and resilience — Business continuity management systems — Guidelines for people aspects of business continuity

Standard Association of Australia （SAA）, Elasticity and Rigidity

AS ISO 22301:2020 Security and resilience — Business continuity management systems — Requirements
AS ISO 22313:2020 Security and resilience — Business continuity management systems — Guidance on the use of ISO 22301
AS 681.2:2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
AS 4459.5:1999 Methods of sampling and testing ceramic tiles - Determination of impact resistance by measurement of coefficient of restitution
AS/NZS 3823.4.3:2014
AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength

European Committee for Electrotechnical Standardization（CENELEC）, Elasticity and Rigidity

EN 62329-3-102:2010 Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance

RO-ASRO, Elasticity and Rigidity

STAS 7157-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at static bending
STAS 6200/13-1980 NATURAL STONES FOR BUILDINGS DETERMINATION OF COMPACTNESS,POROSITY AND SATURATION COEFFICIENT

UY-UNIT, Elasticity and Rigidity

UNIT 42-1948

Anhui Provincial Standard of the People's Republic of China, Elasticity and Rigidity

DB34/T 3371-2019 Method for determination of thermal conductivity of rigid copper-clad laminates for printed circuit boards

International Electrotechnical Commission (IEC), Elasticity and Rigidity

IEC 62329-3-102:2010 Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance

Defense Logistics Agency, Elasticity and Rigidity

DLA DSCC-DWG-05004 REV A-2007 CONNECTOR, ELECTRICAL, PLUG, RADIO FREQUENCY, SERIES ZMA, PIN CONTACT, FOR .141 AND .086 SEMIRIGID CABLE
DLA DSCC-DWG-05005 REV A-2007 CONNECTOR, ELECTRICAL, PLUG, RADIO FREQUENCY, SERIES ZMA, SOCKET CONTACT, FOR .141 AND .086, SEMIRIGID CABLE

IN-BIS, Elasticity and Rigidity

IS 11239 Pt.7-1985

United States Navy, Elasticity and Rigidity

NAVY MIL-M-24476 B-1993 MOUNTS, RESILIENT: PIPE SUPPORT, TYPES 7M50, 6M150, 6M450, 6M900, AND 5M3500

International Federation of Trucks and Engines, Elasticity and Rigidity

NAVISTAR ESP NM-5.101-GS-2015 VOID - Tapered and Reduced Cross Section (Circlip) Retaining Rings - Metric Series (Noun Code -7175)

European Committee for Standardization (CEN), Elasticity and Rigidity

EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
EN 1448:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Components - Test Methods to Prove the Design of Rigid Locked Socket-and-Spigot Joints Elastomeric Seals
EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
EN ISO 6360-4:2004 Dentistry Number coding system for rotary instruments Part 4: Specific characteristics of diamond instruments

未注明发布机构, Elasticity and Rigidity

BS EN ISO 10846-3:2002(2003) Acoustics and vibration — Laboratory measurement of vibro - acoustic transfer properties of resilient elements — Part 3 : Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN 4840-102:2019(2020) Aerospace series — Heat shrinkable moulded shapes Part 102 : Elastomeric, semi - rigid, temperature range 75 to 150 °C — Product Standard

Lithuanian Standards Office , Elasticity and Rigidity

LST EN 62329-3-102-2010 Heat-shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performan
LST EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
LST EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
LST EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
LST EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
LST EN 13893-2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces

ZA-SANS, Elasticity and Rigidity

SANS 6015:2004 Modulus of elasticity and modulus of rupture in static bending of fibreboards

AREMA - American Railway Engineering and Maintenance-of-Way Association, Elasticity and Rigidity

320-1959 Data and Sections Bolted Rigid Frogs ((See AREMA PORTFOLIO OF TRACKWORK PLANS))

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Elasticity and Rigidity

ASHRAE 4503-2002 A Numerical Study of Pressure Distribution and Flow Through Rigid Short-Tube Orifices

HU-MSZT, Elasticity and Rigidity

FI-SFS, Elasticity and Rigidity

SFS-ISO 4897:1987 This standard is approved in English

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Elasticity and Rigidity

PREN 4840-102-2018 Aerospace series Heat shrinkable moulded shapes Part 102: Elastomeric@ semi-rigid@ temperature range -75 to 150 °C Product Standard (Edition P 1)

NATO - North Atlantic Treaty Organization, Elasticity and Rigidity

STANAG 3605-2010 Compatibility of Arming Systems and Expendable Aircraft Stores (ED 5; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.

YU-JUS, Elasticity and Rigidity

JUS U.M1.026-1992 Concrete - Determination of the dinamic modulus of elasticity and poisson's ratio
JUS H.F8.306-1989 Matural gas. Calcnlaticm of compressib±lity and supercompressibxlity factors

AENOR, Elasticity and Rigidity

UNE-EN ISO 10846-3:2003 Acoustics and vibration. Laboratory measurements of vibro-acoustic transfer properties of resilient elements. Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion. (ISO 10846-3:2002)
UNE-EN ISO 10846-2:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
UNE-EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
UNE-EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
UNE-EN 13893:2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces.
UNE-EN 16506:2015 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
UNE-EN 3056:1996 AEROSPACE SERIES. BEARINGS, AIRFRAME ROLLING. RIGID DOUBLE ROW BALL BEARINGS IN STEEL. DIMENSIONS AND LOADS.

US-FCR, Elasticity and Rigidity

FCR COE CRD-C 547-88-1988 HANDBOOK FOR CONCRETE AND CEMENT STANDARD METHODS OF TESTING FOR JET-FUEL AND HEAT RESISTANCE OF PREFORMED POLYCHLOROPRENE ELASTOMERIC JOINT SEALS FOR RIGID PAVEMENTS

ABMA - American Bearing Manufacturers Association, Elasticity and Rigidity

14203-1998 Aerospace - Airframe ball bearings@ single row@ rigid@ diameter series 8 and 9 - Metric series
14202-1997 Aerospace - Airframe Ball Bearings@ Single-Row@ Rigid@ Diameter Series 0 and 2 - Metric Series
14202-1998 Aerospace - Airframe ball bearings@ single row@ rigid@ diameter series 0 and 2 - Metric series

TR-TSE, Elasticity and Rigidity

TS 2030-1975 DETERMINATION OF ELASTIC MODULI AND POISSON'S RATIO OF ROCKS ?N UNIAXIAL COMPRESSION

International Telecommunication Union (ITU), Elasticity and Rigidity

ITU-T G.974-2004 Characteristics of regenerative optical fibre submarine cable systems SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system ?Optical fibre submarine cable systems
ITU-T G.992.2 CORR 1-2002 Splitterless asymmetric digital subscriber line (ADSL) transceivers Corrigendum 1 Study Group 15
ITU-T G.911 FRENCH-1997 Parameters and Calculation Methodologies for Reliability and Availability of Fibre Optic Systems - Series G: Transmission Systems and Media Digital Systems and Networks Digital Transmission Systems - Digital Sections and Digital Line System - Parameters f
ITU-T G.911 SPANISH-1997 Parameters and Calculation Methodologies for Reliability and Availability of Fibre Optic Systems - Series G: Transmission Systems and Media Digital Systems and Networks Digital Transmission Systems - Digital Sections and Digital Line System - Parameters f
ITU-R QUESTION 2093-1993 Variability and risk parameters in system performance analysis
ITU-T G.911-1997 Parameters and Calculation Methodologies for Reliability and Availability of Fibre Optic Systems - Series G: Transmission Systems and Media Digital Systems and Networks Digital Transmission Systems - Digital Sections and Digital Line System - Parameters f
ITU-R M.1451-2000 Transport Information and Control Systems: Functionalities
ITU-R M.1452-2000 Transport Information and Control Systems- Low Power Short-Range Vehicular Radar Equipment at 60 GHz and 76 GHz

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Elasticity and Rigidity

QUESTION 209/3-1993 Variability and risk parameters in system performance analysis

GM North America, Elasticity and Rigidity

GM GMP.EEBC.018-2003 Thermoplastic Polyester Elastomer - 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated Modulus, Lubricated

European Association of Aerospace Industries, Elasticity and Rigidity

AECMA PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Issue P 1

SE-SIS, Elasticity and Rigidity

SIS SS 3413-1988 Plastics pipes and fittings — Testing of joint tightness on discharge systems with elastic sealing rings

GB-REG, Elasticity and Rigidity

REG NACA-TN-3748-1956 Calculation and compilation of the unsteady-lift functions for a rigid wing subjected to sinusoidal gusts and to sinusoidal sinking oscillations

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Elasticity and Rigidity

ITU-T G.911-1993 Parameters and Calculation Methodologies for Reliability and Availability of Fibre Optic Systems - Digital Sections and Digital Line Systems (Study Group XV) 33 pp