ZH
RU
ES
Elastic Limit and Elastic Coefficient
Elastic Limit and Elastic Coefficient, Total:216 items.
In the international standard classification, Elastic Limit and Elastic Coefficient involves: Wood-based panels, Testing of metals, Products of non-ferrous metals, Protective equipment, Products of the textile industry, Protection of and in buildings, Continuous handling equipment, Wood, sawlogs and sawn timber, Earthworks. Excavations. Foundation construction. Underground works, Ceramics, Cellular materials, Bearings, Rubber and plastics products, Iron and steel products, Surface treatment and coating, Gas and steam turbines. Steam engines, Construction materials, Test conditions and procedures in general, Pipeline components and pipelines, Non-textile floor coverings, Company organization and management, Fasteners for aerospace construction, Bridge construction, Road vehicle systems, Plastics, Metrology and measurement in general, Radiation measurements, Shafts and couplings, Software development and system documentation, Products of the chemical industry, Glass, Materials for aerospace construction, Elements of buildings, Rubber.
RU-GOST R, Elastic Limit and Elastic Coefficient
- GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
- GOST 9623-1987 Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
- GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
- GOST 9625-2013 Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
- GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
- GOST 21523.9-1987 Modified wood. Method for determination of modulus of elasticity in tension
- GOST 21523.7-1987 Modified wood. Method for determination of modulus of elasticity in static bending
- GOST 21554.1-1981 Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending
- GOST 21523.8-1993 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 21523.8-1987 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 16483.9-1973 Wood. Methods for determination of modulus of elasticity in static bending
- GOST 22346-1977 Flexible cellular plastics. Method for the determination cold-resistance
- GOST 16483.24-1973 Wood. Determination method of modulus of elasticity in compression along fibres
- GOST 16483.25-1973 Wood. Determination method of modulus of elasticity in commpression across fibres
- GOST 24452-1980 Concretes. Methods of prismatic compressive strength, modulus of elasticity and Poisson's ratio determination
- GOST R 55043-2012 Non-destructive testing. Evaluation of elastic-acoustic coefficients. General requirements
- GOST 15180-1986 Flexible flat gaskets. Main parameters and dimensions
- GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction
- GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
- GOST 23404-1986 Lightweight enclosure panels with foam plastic thermal insulation. Method of determining modulus of elasticity and shear modulus of foam plastic
CZ-CSN, Elastic Limit and Elastic Coefficient
- CSN 42 0345-1987 Metal testing. Testing of proportional limit of tensile strength
- CSN 49 0124-1980 Resonant method for determination of modulus of elasticity and of tho loga- rithmic decrement of vibration
British Standards Institution (BSI), Elastic Limit and Elastic Coefficient
- BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
- BS EN 12384:1999(2000) Copper and copper alloys - Determination of spring bending limit on strip
- BS ISO 28000:2022 Tracked Changes. Security and resilience. Security management systems. Requirements
- BS EN ISO 22301:2019 Tracked Changes. Security and resilience. Business continuity management systems. Requirements
- 19/30379712 DC BS EN ISO 22313. Security and resilience. Business continuity management systems. Guidance
- BS EN ISO 22313:2020 Security and resilience. Business continuity management systems. Guidance on the use of ISO 22301
- PD ISO/TS 22331:2018 Security and resilience. Business continuity management systems. Guidelines for business continuity strategy
- PD ISO/TS 22330:2018 Security and resilience. Business continuity management systems. Guidelines for people aspects of business continuity
- 21/30412869 DC BS ISO 28000. Security and resilience. Security management systems. Requirements for the supply chain
- PD ISO/TS 22332:2021 Security and resilience. Business continuity management systems. Guidelines for developing business continuity plans and procedures
- PD ISO/TS 22318:2021 Tracked Changes. Security and resilience. Business continuity management systems. Guidelines for supply chain continuity management
- PD ISO/TS 22317:2021 Tracked Changes. Security and resilience. Business continuity management systems. Guidelines for business impact analysis
European Committee for Standardization (CEN), Elastic Limit and Elastic Coefficient
- EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
Professional Standard - Aerospace, Elastic Limit and Elastic Coefficient
- QJ 2730-1995 Ballistic missile and launch vehicle control system polarity regulations
- QJ 1805-1989 Guidance on data collection and management of reliability and maintainability of aeronautical missile weapon systems
- QJ 1408-1988 可靠性
- QJ 1408-1994 可靠性
- QJ 1830-1990 Strategic Missile System Reliability Data Acquisition Card and Filling Specifications
- QJ 2932-1997 Guidelines for Safety Review of Spacecraft and Missile Weapon Systems
GM North America, Elastic Limit and Elastic Coefficient
- GM GM9680P-1994 Ultimate Load/Bond Strength Test for Elastomeric Seat Suspension Systems
- GM GMN6814-2002 Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling
IT-UNI, Elastic Limit and Elastic Coefficient
American Society for Testing and Materials (ASTM), Elastic Limit and Elastic Coefficient
- ASTM E3110-18 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM E3110/E3110M-19 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM E3110/E3110M-20 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM E3110/E3110M-22 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D6546-00 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
- ASTM D6546-00(2005) Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
- ASTM D6546-00(2010) Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
- ASTM D5212-91(1997) Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures
- ASTM D5212-03 Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures
- ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
- ASTM D6546-23 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
- ASTM D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM D6835-08(2014) Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials 40;TEEE41;
- ASTM D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
- ASTM D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
AENOR, Elastic Limit and Elastic Coefficient
- UNE 36493-1:1980 ESTIMATION AND VERIFICATION OF HIGH TEMPERATURE ELASTIC VALUES IN STEEL PRODUCTS FOR PESSURE VESSELS. ELASTIC LIMIT IN CARBON STEEL PRODUCTS OR LIGHTHY ALLOYED
- UNE 36493-2:1980 ESTIMATION AND VERIFICATION OF ELASTIC VALUES AT HIGH TEMPERATURE IN STEEL PRODUCTS FOR PRESSURE VESSELS. ELASTIC LIMIT IN AUSTENITIC STEEL PRODUCTS
The American Road & Transportation Builders Association, Elastic Limit and Elastic Coefficient
- AASHTO DIVISION I-A 3.6 Elastic Seismic Response Coefficient
- AASHTO T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- AASHTO T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- AASHTO T 90-2016 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- AASHTO T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils Twentieth Edition
AASHTO - American Association of State Highway and Transportation Officials, Elastic Limit and Elastic Coefficient
- DIVISION I-A 3.6-1996 Elastic Seismic Response Coefficient
- T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- T90-1994 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
- T90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils (Twentieth Edition)
Institute of Electrical and Electronics Engineers (IEEE), Elastic Limit and Elastic Coefficient
German Institute for Standardization, Elastic Limit and Elastic Coefficient
- DIN 53835-3:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
- DIN 53835-4:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant force limits
- DIN 53835-2:1981 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
- DIN 53835-2:1981-08 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
- DIN 53835-2:2023-07 Testing of textiles - Testing of the tenso-elastic behaviour - Part 2: Single and plied elastomeric yarns, repeated application of tensile load between constant extension limits / Note: Date of issue 2023-06-02*Intended as replacement for DIN 53835-2 (...
- DIN EN ISO 22301:2020-06 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019); German version EN ISO 22301:2019
- DIN ISO 28000:2023-11 Security and resilience - Security management systems - Requirements (ISO 28000:2022)
- DIN 53835-14:1992 Testing of textiles; tensile test for testing the elastic behaviour; knitted fabrics, single strain between two force limits
- DIN EN 13893:2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces; German version EN 13893:2002
- DIN EN ISO 22301:2020 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019)
- DIN 53835-13:1983 Testing of textiles; determination of the elastic behaviour of textile fabrics by a single application of tensile load between constant extension limits
- DIN 13343:1994 Linear viscoelastic materials; concepts, constitutive equations, basic functions
- DIN 53835-14:1992-11 Testing of textiles; tensile test for testing the elastic behaviour; knitted fabrics, single strain between two force limits
- DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
- DIN ISO 28000:2021-04 Security and resilience - Security management systems - Requirements for the supply chain (ISO/DIS 28000:2021); Text in German and English / Note: Date of issue 2021-03-19*Intended as replacement for DIN ISO 28000 (2015-08).
- DIN EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020)
- DIN EN ISO 22313:2020-10 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020); German version EN ISO 22313:2020
- DIN 53835-4:1981-08 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant force limits
- DIN 53835-3:1981-08 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
- DIN 65271:2002 Aerospace series - Elastomeric semi-finished products and parts - Technical specification
- DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
- DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN 53835-13:1983-11 Testing of textiles; determination of the elastic behaviour of textile fabrics by a single application of tensile load between constant extension limits
Group Standards of the People's Republic of China, Elastic Limit and Elastic Coefficient
- T/CSTM 00392-2021 Test method for resilience factor of resilient blanket for LNG storage tank
- T/SBX 046-2021 Method for Determination of Elastic Coefficient of Nematic Thermotropic Liquid Crystal
Military Standard of the People's Republic of China-General Armament Department, Elastic Limit and Elastic Coefficient
- GJB 10013-2021 Test method for error coefficient of ballistic missile inertial platform
- GJB 3315A-2021 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
- GJB 3315-1998 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
- GJB 2153A-2018 Specification for high stable low frequency temperature coefficient constant elastic alloys
- GJB 2153-1994 Specification for high stable low frequency temperature coefficient constant elastic alloys
- GJB 1130-1991 General requirements for reliability and maintainability of aircraft ejection life-saving systems
- GJB 1909.9-1994 Equipment reliability and maintainability parameter selection and indicator determination requirements for ammunition
International Organization for Standardization (ISO), Elastic Limit and Elastic Coefficient
- ISO 9856:2003/Amd 1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus; Amendment 1
- ISO 2605-2:1976 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part II : Proof stress of austenitic steel products
- ISO 2605-3:1985 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part 3 : An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- ISO 28000:2022 Security and resilience — Security management systems — Requirements
- ISO 2605-1:1976 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part I : Yield or proof stress of carbon and low alloy steel products
- ISO 4863:1984 Resilient shaft couplings; Information to be supplied by users and manufacturers
- ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary
- ISO/TS 22318:2021 Security and resilience — Business continuity management systems — Guidelines for supply chain continuity management
- ISO/TS 22317:2021 Security and resilience — Business continuity management systems — Guidelines for business impact analysis
ESDU - Engineering Sciences Data Unit, Elastic Limit and Elastic Coefficient
- ESDU 80027 C-1995 Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
- ESDU 88035 B-1994 Maximum inelastic bending moments and form factors for symmetric bending of beams.
- ESDU 89048-1989 Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
- ESDU 09014-2009 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
- ESDU 09014 A-2013 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
- ESDU 69020 C-1993 Elastic stress concentration factors. Geometric discontinuities in flat bars or strips of isotropic materials.
- ESDU 79008-1979 Elastic stress concentration factors. Rectangular notch in the edge of a wide flat plate in tension.
- ESDU 75033-1975 Elastic stress concentration factors. Double radius fillets in shouldered shafts in torsion.
Taiwan Provincial Standard of the People's Republic of China, Elastic Limit and Elastic Coefficient
- CNS 12702-1990 Method of Test for Flastic Modulus of High Performance Ceramics
Professional Standard - Ferrous Metallurgy, Elastic Limit and Elastic Coefficient
- YB/T 5244-1993 Positive temperature coefficient constant elastic alloy 3J63
GM Global, Elastic Limit and Elastic Coefficient
- GMW 16973-2013 Coefficient of Linear Thermal Expansion (CLTE) for Elastomers Issue 1; English
- GMW 16666-2011 Coefficient of Friction Measurement for Elastomers Issue 1; English
Danish Standards Foundation, Elastic Limit and Elastic Coefficient
- DS 434.5:1989 Lightweight aggregate concrete components. Determination of modules of elasticity
- DS 433.5:1989 Aerated lightweight concrete components. Modules of elasticity
- DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
- DS 423.25:1984 Testing of concrete. Hardened concrete. Modulus of elasticity
- DS 3001:2009 Organizational resilience: Security, preparedness, and continuity management systems - Requirements with guidance for use
- DS/EN 13893:2003 Resilient, laminate and textile floor coverings - Parameters for the measurement of dynamic coefficient of friction on dry floor surfaces
- DS/ISO/TS 22332:2021 Security and resilience – Business continuity management systems – Guidelines for developing business continuity plans and procedures
Association Francaise de Normalisation, Elastic Limit and Elastic Coefficient
- NF T70-701:1995 Energetic materials for defense. Performances. Estimation of critical diameter by the tiered pellets method.
- NF A50-800-3:2019 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection
- NF A50-800-3/A1:2022 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : Caractéristiques des munitions et vitesses limites de protection
- NF A50-800-3/A2:2023 Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection
- NF E22-563:1988 Plain bearings. Metallic thin-walled half bearings. Determination of the sigma 0,01 elastic limit.
- NF A36-210:1988 Produits sidérurgiques - Tôles pour chaudières et appareils à pression - Aciers alliés traités à haute limite d'élasticité - Nuances et qualité.
- NF A36-800-3/A1:2023 Tôles en acier soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection - Amendement 1
- NF EN ISO 22301:2019 Sécurité et résilience - Systèmes de management de la continuité d'activité - Exigences
- NF P62-127*NF EN 13893:2003 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces.
- NF X52-313*NF EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301
- NF EN ISO 22313:2020 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices sur l'utilisation de l'ISO 22301
- NF R95-406:1975 Systèmes de freinage à réservé d'énergie - Raccordements à vis-raccord et garnitures élastiques
- NF T51-061:1971 PLASTICS. DETERMINATION OF THE VISCOSITY NUMBER AND THE LIMITING VISCOSITY NUMBER OF POLYETHYLENES AND POLYPROPYLENES IN DILUTE SOLUTION.
- XP Z74-311*XP ISO/TS 22317:2022 Security and resilience - Business continuity management systems - Guidelines for business impact analysis
- XP ISO/TS 22317:2022 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices pour le bilan d'impact sur l'activité
- XP Z74-313*XP ISO/TS 22318:2022 Security and resilience - Business continuity management systems - Guidelines for supply chain continuity management
- XP ISO/TS 22318:2022 Sécurité et résilience - Systèmes de management de la continuité d'activité - Lignes directrices pour le management de la continuité de la chaîne d'approvisionnement
- FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
GOSTR, Elastic Limit and Elastic Coefficient
- GOST 22346-2017 Cellular flexible plastics. Method for determination cold-resistance
BE-NBN, Elastic Limit and Elastic Coefficient
PT-IPQ, Elastic Limit and Elastic Coefficient
- NP EN 310-2002 Wood-based panels Determination of modulus of elasticity in bending and of bending strength
Japanese Industrial Standards Committee (JISC), Elastic Limit and Elastic Coefficient
- JIS K 6378:2010 Light conveyor belts -- Determination of the relaxed elastic modulus
- JIS H 8454:2010 Testing method for longitudinal elastic modulus of thermal barrier coatings
- JIS Q 22313:2021 Security and resilience -- Business continuity management systems -- Guidance on the use of ISO 22301
- JIS K 7213:1995 Determination of shear modulus and mechanical damping of plastics by means of torsion pendulum
PL-PKN, Elastic Limit and Elastic Coefficient
- PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
- PN D04118-1959 Physical and mechanical properties of wood -- Determination of modulus of elasticity in tension parallel to grain
- PN-EN ISO 22301-2020-04 P Security and resilience -- Business continuity management systems -- Requirements (ISO 22301:2019)
- PN D04117-1963 Physical and mechanical properties ol ?imber. Determination of the mo- dulus of etasticity at static bending
International Federation of Trucks and Engines, Elastic Limit and Elastic Coefficient
ES-UNE, Elastic Limit and Elastic Coefficient
- UNE-EN ISO 22301:2020 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019)
- UNE-ISO/TS 22331:2020 Security and resilience — Business continuity management systems — Guidelines for business continuity strategy
- UNE-EN ISO 22313:2020 Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 22313:2020)
- UNE-ISO/TS 22330:2020 Security and resilience — Business continuity management systems — Guidelines for people aspects of business continuity
Standard Association of Australia （SAA）, Elastic Limit and Elastic Coefficient
- AS ISO 22301:2020 Security and resilience — Business continuity management systems — Requirements
- AS 681.2:2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
- AS ISO 22313:2020 Security and resilience — Business continuity management systems — Guidance on the use of ISO 22301
- AS 4459.5:1999 Methods of sampling and testing ceramic tiles - Determination of impact resistance by measurement of coefficient of restitution
United States Navy, Elastic Limit and Elastic Coefficient
Korean Agency for Technology and Standards (KATS), Elastic Limit and Elastic Coefficient
- KS D ISO 2605-3:2004 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- KS D ISO 2605-3:2013 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- KS A ISO 22301:2022 Security and resilience — Business continuity management systems — Requirements
- KS B ISO 4863:2014 Resilient shaft couplings-Information to be supplied by users and manufacturers
- KS F 2868-2003 Determination of dynamic stiffness of materials used under floating floors in dwellings
- KS F 2376-2001 Testing method for indirect tension test for resilient modulus of bituminous mixtures
UY-UNIT, Elastic Limit and Elastic Coefficient
KR-KS, Elastic Limit and Elastic Coefficient
- KS A ISO 22301-2022 Security and resilience — Business continuity management systems — Requirements
WRC - Welding Research Council, Elastic Limit and Elastic Coefficient
- BULLETIN 163-1971 ELASTIC-PLASTIC DEFORMATIONS IN PRESSURE VESSEL HEADS; SUMMARY REPORT ON PLASTIC LIMIT ANALYSIS OF HEMISPHERICAL AND TORICONICAL-HEAD PRESSURE VESSELS
- BULLETIN 251-1979 COMPARISON OF THREE-DIMENSIONAL FINITE ELEMENT AND PHOTELASTIC RESULTS FOR LATERAL CONNECTION@ WC-12B2
HU-MSZT, Elastic Limit and Elastic Coefficient
ES-AENOR, Elastic Limit and Elastic Coefficient
RO-ASRO, Elastic Limit and Elastic Coefficient
- STAS 7157-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at static bending
ZA-SANS, Elastic Limit and Elastic Coefficient
- SANS 6015:2004 Modulus of elasticity and modulus of rupture in static bending of fibreboards
European Association of Aerospace Industries, Elastic Limit and Elastic Coefficient
- AECMA PREN 3376-1989 Aerospace Series Limits of Surface Imperfections of Elastomeric Toroidal Sealing Rings (O-rings) Issue P 1
YU-JUS, Elastic Limit and Elastic Coefficient
- JUS U.M1.026-1992 Concrete - Determination of the dinamic modulus of elasticity and poisson's ratio
American National Standards Institute （ANSI), Elastic Limit and Elastic Coefficient
- ANSI/ASIS SPC.2-2014 Auditing Management Systems:Risk, Resilience, Security, and Continuity - Guidance for Application
NATO - North Atlantic Treaty Organization, Elastic Limit and Elastic Coefficient
- STANAG 3605-2010 Compatibility of Arming Systems and Expendable Aircraft Stores (ED 5; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.
TR-TSE, Elastic Limit and Elastic Coefficient
- TS 2030-1975 DETERMINATION OF ELASTIC MODULI AND POISSON'S RATIO OF ROCKS ?N UNIAXIAL COMPRESSION
North Atlantic Treaty Organization Standards Agency, Elastic Limit and Elastic Coefficient
- STANAG 4106-1995 PROCEDURES TO DETERMINE THE DEGREE OF BALLISTIC PERFORMANCE SIMILARITY OF NATO INDIRECT FIRE AMMUNITION AND THE APPLICABLE CORRECTIONS TO AIMING DATA
Aerospace, Security and Defence Industries Association of Europe (ASD), Elastic Limit and Elastic Coefficient
- ASD-STAN PREN 3376-1989 Aerospace Series Limits of Surface Imperfections of Elastomeric Toroidal Sealing Rings (O-rings) (Issue P 1)