ZH
RU
ES

Differential principle

Differential principle, Total:135 items.

In the international standard classification, Differential principle involves: Technical drawings, Nuclear energy engineering, Linear and angular measurements, Plastics, Bearings, Screw threads, Water quality, Non-destructive testing, Electronic tubes, Analytical chemistry, Optical equipment, Optics and optical measurements, Bridge construction, Paints and varnishes, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Construction industry, Measurement of fluid flow, Environmental testing, Mechanical testing, Lubricants, industrial oils and related products, Particle size analysis. Sieving, Earthworks. Excavations. Foundation construction. Underground works, Fruits. Vegetables.

German Institute for Standardization, Differential principle

DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN ISO 965-1/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1 (ISO 965-1:2013/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as an amendment to DIN ISO 965-1 (2017-05).
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51395-1:1999 Testing of metal working fluids - Testing in the VSI foam analyzer - Part 1: General working principles
DIN 51834-1:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN 51834-1:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN 51819-1:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 51819-1:1999 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles

Association Francaise de Normalisation, Differential principle

NF EN ISO 23131:2022 Ellipsométrie - Principes
NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
NF ISO 965-1:2013 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales
NF E03-051*NF ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: principles and basic data
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF ISO 965-1/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales - Amendement 1
NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF X10-102-1*NF EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1 : general principles and requirements

FI-SFS, Differential principle

SFS 2105-1976

ES-UNE, Differential principle

UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)

British Standards Institution (BSI), Differential principle

BS ISO 8015:2001 Technical drawings. Fundamental tolerancing principle
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 965-1:2013+A1:2021 ISO general purpose metric screw threads. Tolerances - Principles and basic data
BS 5100:1974 Guide to the principles of geometrical tolerancing (conforming to BS 308:Part 3:1972)
BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
BS 3900-D8:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
20/30423710 DC BS ISO 965-1 AMD1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
21/30438772 DC BS ISO 965-1.2 AMD 1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements
BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems

AT-ON, Differential principle

ONORM ISO 8015:1987 Technical drawings; fundamental tolerancing principle
ONORM ISO 965 Teil.1:1983 ISO generalpurpose metric screw threads; Tolerances; Principles and basic data
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments

Korean Agency for Technology and Standards (KATS), Differential principle

KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2022) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS F ISO 1803-2002(2017) Building construction－Tolerances－Expression of dimensional accuracy－Principles and terminology
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS M ISO 217:2008 Paper-Untrimmed sizes-Designation and tolerances for primary and supplementary ranges, and indication of machine direction
KS B ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 1:General principles and requirements
KS B ISO 5167-1:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements

Association of German Mechanical Engineers, Differential principle

VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations

SE-SIS, Differential principle

SIS SMS 1722-1973 Metric screw threads. Tolerances. Principles and basic data
SIS SMS 1722-1966 Metric screw threads. Tolerances. Principles and basic data
SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

American Society of Mechanical Engineers (ASME), Differential principle

ASME Y14.5.1M-1994 Mathematical definition of dimensioning and tolerancing principles

CU-NC, Differential principle

NC 06-69-1969 ISO metric screw threads. Tolerances. Principies and basic data

Taiwan Provincial Standard of the People's Republic of China, Differential principle

CNS 3-12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)

VN-TCVN, Differential principle

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

Indonesia Standards, Differential principle

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

American National Standards Institute （ANSI), Differential principle

ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures

IT-UNI, Differential principle

UNI 7226-P2-1976

未注明发布机构, Differential principle

BS ISO 1803:1997(1999) Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology
ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1

KP-CSK, Differential principle

KPS 2551-1-2002 General purpose metric screw threads-Tolerances-Part 1:Principles and basic data

RU-GOST R, Differential principle

GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods

International Organization for Standardization (ISO), Differential principle

ISO 965-1:1998 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
ISO 965-1:2013 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data
ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1
ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements

Japanese Industrial Standards Committee (JISC), Differential principle

JIS B 0217-1:2013 ISO metric trapezoidal screw threads.Tolerances .Part 1: Principles and basic data
JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
JIS Z 8317-1:2008 Technical drawings -- Indications of dimensions and tolerances -- Part 1: General principles

Danish Standards Foundation, Differential principle

DS/ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

KR-KS, Differential principle

KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

Hubei Provincial Standard of the People's Republic of China, Differential principle

DB42/T 1742-2021 Technical regulations for bridge vertical displacement monitoring based on the principle of liquid-gas coupling pressure difference

United States Navy, Differential principle

NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

CZ-CSN, Differential principle

CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices

Group Standards of the People's Republic of China, Differential principle

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

American Society for Testing and Materials (ASTM), Differential principle

ASTM D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

American Gas Association, Differential principle

AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

Professional Standard - Aviation, Differential principle

HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents

IN-BIS, Differential principle

IS 12257 Pt.1-1987

VDI - Verein Deutscher Ingenieure, Differential principle

VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2009 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2019 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702

European Association of Aerospace Industries, Differential principle

AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1

European Committee for Standardization (CEN), Differential principle

EN ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2022)
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements ISO 5167-1:2003;

CEN - European Committee for Standardization, Differential principle

EN ISO 5167-1:1995 Measurement of Fluid Flow by Means of Pressure Differential Devices - Part 1: Orifice Plates@ Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full

Underwriters Laboratories (UL), Differential principle

UL 61010A-2-061 (ND)-2002 National Differences For UL 61010A-2-061 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization (First Edition)

European Telecommunications Standards Institute (ETSI), Differential principle

ETSI TR 125 921-2000 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3G TR 25.921 Version 3.1.0 Release 1999
ETSI TR 125 921-2003 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 Version 5.2.0 Release 5
ETSI TR 125 921-2002 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3GPP TR 25.921 Version 4.4.0 Release 4
ETSI TR 125 921-2004 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 version 4.8.0 Release 4
ETSI TR 125 921-2005 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 version 6.1.0 Release 6
ETSI TR 125 921-2001 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3GPP TR 25.921 Version 4.2.0 Release 4

AENOR, Differential principle

UNE 58911:2002 Storage and retrieval machines. Calculation principles of storage and retrieval machines. Tolerances, deformations and clearances in the high-bay warehouse.

US-CFR-file, Differential principle

CFR 2-1800.6-2014 Grants and agreements. Part1800:Uniform administrative requirements, cost principles, and audit requirements for federal awards. Section1800.6:Deviations.
CFR 2-200.474-2013 Grants and Agreements. Part200:Uniform administrative requirements, cost principles,and audit requirements for Federal awards. Section200.474:Travel costs.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Differential principle

GB/T 2624.1-2006 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements