ZH
RU
ES

The relationship between hardness and

The relationship between hardness and, Total:497 items.

In the international standard classification, The relationship between hardness and involves: Testing of metals, Lubricants, industrial oils and related products, Products of the textile industry, Adhesives, Ferrous metals, Welding, brazing and soldering, Mechanical testing, Rubber, Telecommunication systems, Plastics, Analytical chemistry, Safety of machinery, Vocabularies, Glass, Fluid power systems, Metrology and measurement in general, Rubber and plastics products, Earthworks. Excavations. Foundation construction. Underground works, Standardization. General rules, Powder metallurgy, Petroleum products in general, Pulps, Paper and board, Aerospace fluid systems and components, Construction materials, Pipeline components and pipelines, Natural gas, Acoustics and acoustic measurements, Raw materials for rubber and plastics, Products of the chemical industry, Fibre optic communications, Noise with respect to human beings, Processes of the textile industry, Clothes, Medical equipment, Materials for aerospace construction, Road engineering, Textile machinery, Air quality, Wood-based panels, Electrical accessories, Cutting tools, Accident and disaster control, Road vehicle systems, Electrical engineering in general, Installations in buildings, Solar energy engineering, Equipment for the chemical industry, Bearings, Diagnostic, maintenance and test equipment, Furniture, Continuous handling equipment, Construction of railways, Radiocommunications, Applications of information technology, Aids for disabled or handicapped persons, Ergonomics, Cellular materials, Domestic, commercial and industrial heating appliances, Shipbuilding and marine structures in general, Cereals, pulses and derived products, Paints and varnishes, Optical equipment, Measurement of volume, mass, density, viscosity, Seagoing vessels.

American Society for Testing and Materials (ASTM), The relationship between hardness and

ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D558-96 Standard Test Methods for Moisture-Density Relations of Soil-Cement Mixtures
ASTM E344-00 Terminology Relating to Thermometry and Hydrometry
ASTM E344-18 Terminology Relating to Thermometry and Hydrometry
ASTM E344-10 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19e1 Terminology Relating to Thermometry and Hydrometry
ASTM E344-02 Terminology Relating to Thermometry and Hydrometry
ASTM E344-08 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19 Terminology Relating to Thermometry and Hydrometry
ASTM E344-20 Terminology Relating to Thermometry and Hydrometry
ASTM E344-16 Terminology Relating to Thermometry and Hydrometry
ASTM D5219-99 Standard Terminology Relating to Body Dimensions for Apparel Sizing
ASTM D7110-05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM F412-06 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-07 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01a Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-00 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-01ae1 Standard Terminology Relating to Plastic Piping Systems
ASTM F1294-97a(2009) Standard Terminology Relating to Automatic Identification Hard Copy Printing Systems
ASTM D5230-10 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
ASTM F412-12 Standard Terminology Relating to Plastic Piping Systems
ASTM E867-23 Standard Terminology Relating to Vehicle-Pavement Systems
ASTM F412-16 Standard Terminology Relating to Plastic Piping Systems
ASTM F412-15 Standard Terminology Relating to Plastic Piping Systems
ASTM F3092-14(2019) Standard Terminology Relating to Optical Fiber Sensing Systems
ASTM F412-21 Standard Terminology Relating to Plastic Piping Systems
ASTM E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems
ASTM F412-13 Standard Terminology Relating to Plastic Piping Systems
ASTM D3888-07 Standard Terminology for Yarn Spinning Systems
ASTM F412-23 Standard Terminology Relating to Plastic Piping Systems
ASTM D5219-09 Standard Terminology Relating to Body Dimensions for Apparel Sizing
ASTM C11-06 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-07b Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-07a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11-07 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM F1156-94 Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)

Korean Agency for Technology and Standards (KATS), The relationship between hardness and

KS K ISO TR 8091-2009(2014) Textiles－Twist factor related to the Tex System
KS B ISO TR 10108:2003 Steel ? Conversion of hardness values to tensile strength values
KS I ISO TR 10686-2014(2019) Hydraulic fluid power — Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
KS I ISO 18453-2010(2016) Natural gas－Correlation between water content and water dew point
KS A 1621-1995 Glossary of terms relating to automatic guided vehicles systems
KS P ISO 8597:2006 Optics and optical instruments-Visual acuity testing-Method of correlating optotypes
KS B ISO 1505-2005(2010) Textile maxhinery－Widths relating to dyeing and finishing machines－ Definitions and range of nominal widths
KS D ISO 4492:2019 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
KS M ISO 4259-2:2021 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
KS M ISO 4259-2-2021(2022) Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
KS M ISO 4259:2009 Petroleum products－Determination and application of precision data in relation to methods of test
KS M ISO 4259-3:2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
KS B ISO 3968:2014 Hydraulic fluid power-Filters-Evaluation of differential pressure versus flow characteristics
KS B ISO 3968:2009 Hydraulic fluid power-Filters-Evaluation of differential pressure versus flow characteristics

International Organization for Standardization (ISO), The relationship between hardness and

ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
ISO/TR 8091:1983 Textiles; Twist factor related to the Tex System
ISO/TR 10108:1989 Steel; conversion of hardness values to tensile strength values
ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
ISO 4492:1985 Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering
ISO 4492:2017 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
ISO/TR 19441:2018 Petroleum products - Density versus temperature relationships of current fuels, biofuels and biofuel components
ISO/TR 22100-2:2013 Safety of machinery.Relationship with ISO 12100.Part 2: How ISO 12100 relates to ISO 13849-1
ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
ISO 4413:1998 Hydraulic fluid power - General rules relating to systems
ISO 4414:1998 Pneumatic fluid power - General rules relating to systems
ISO 8625-3:2018 Aerospace - Fluid systems - Vocabulary - Part 3: General terms and definitions relating to temperature
ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
ISO 4492:1978 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
ISO 3968:2017 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
ISO/TS 17845:2004 Welding and allied processes - Designation system for imperfections
ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test
ISO 4259:1979 Petroleum products — Determination and application of precision data in relation to methods of test
ISO 14230-4:2000 Road vehicles - Diagnostic systems; Keyword protocol 2000 - Part 4: Requirements for emission-related systems
ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test
ISO 23586:2022 Conveyor belts — Indentation rolling resistance related to belt width — Requirements and testing
ISO 4259-1:2017/Amd 1:2019 Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 1
ISO 4259-3:2020 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
ISO 4259-1:2017/Amd 2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test; Amendment 2
ISO 3968:2001 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
ISO 3968:1981 Hydraulic fluid power; Filters; Evaluation of pressure drop versus flow characteristics
ISO/TS 23860:2022 Ships and marine technology — Vocabulary related to autonomous ship systems
ISO/IEC 23091-1:2018 Information technology — Coding-independent code points — Part 1: Systems
ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
ISO 4259-2:2017/Amd 1:2019 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test — Amendment 1
ISO 8625-3:1991 Aerospace; fluid systems; vocabulary; part 3: general terms and definitions relating to temperature

British Standards Institution (BSI), The relationship between hardness and

BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
PD ISO/TR 22100-2:2013 Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to ISO 13849-1
PD CEN ISO/TR 22100-1:2021 Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to type-B and type-C standards
PD ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
BS PD ISO/TR 22100-1:2015 Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to type-B and type-C standards
BS ISO 8625-3:2018 Aerospace. Fluid systems. Vocabulary. General terms and definitions relating to temperature
BS ISO 18488:2015 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
BS EN ISO 7029:2000 Acoustics - Statistical distribution of hearing thresholds as a function of age
BS EN ISO 4259-1:2017+A2:2020 Petroleum and related products. Precision of measurement methods and results - Determination of precision data in relation to methods of test
BS EN ISO 4259-1:2017 Petroleum and related products. Precision of measurement methods and results. Determination of precision data in relation to methods of test
BS PD CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100. Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
BS EN ISO 4259-2:2017+A1:2019 Petroleum and related products. Precision of measurement methods and results - Interpretation and application of precision data in relation to methods of test
BS EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
BS PD CEN/TR 15615:2008 Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD)
BS ISO 48-1:2018 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of hardness. Introduction and guidance
BS PD IEC TR 63226:2021 Managing fire risk related to photovoltaic (PV) systems on buildings
BS ISO 3968:2017 Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow
BS DD CEN ISO/TS 17845:2004 Welding and allied processes - Designation system for imperfections
BS EN ISO 4259-3:2020 Petroleum and related products. Precision of measurement methods and results - Monitoring and verification of published precision data in relation to methods of test
DD ENV 50129-1999 Railway applications. Safety related electronic systems for signalling
BS DD ENV 50129:1999 Railway applications - Safety related electronic systems for signalling
PD IEC TR 63226:2021 Managing fire risk related to photovoltaic (PV) systems on buildings
BS 3900-C6:2000 Methods of test for paints - Tests associated with paint film formation - Determination of fineness of grind
BS 7012-3:1997 Light microscopes - Imaging distances related to mechanical reference planes for tube length 160 mm
BS ISO 3968:2002 Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS PD ISO/TR 22100-5:2021 Safety of machinery. Relationship with ISO 12100. Implications of artificial intelligence machine learning
PD CEN ISO/TR 22100-5:2022 Safety of machinery. Relationship with ISO 12100. Implications of artificial intelligence machine learning

NL-NEN, The relationship between hardness and

NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
NEN-ISO 4492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)

Canadian General Standards Board （CGSB), The relationship between hardness and

CGSB 9-GP-24M-1978 Carton Pour Boites
CAN/CGSB-4.2 NO.71-M91-1991 Textile Test Methods Textiles - Twist Factor Related to the Tex System
CGSB 4.2 NO. 71-M91-CAN/CGSB-1991 M閠hodes pour 閜reuves textiles Textiles ?Facteur de torsion li?au Syst鑝e Tex

NO-SN, The relationship between hardness and

NS 3656-1993 Concrete testing. Rate of reaction as a function o temperature

BR-ABNT, The relationship between hardness and

ABNT PB-584-1979

国家市场监督管理总局、中国国家标准化管理委员会, The relationship between hardness and

GB/T 38243-2019 Rubber—Calibration and verification of hardness testers
GB/T 40919-2021 Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth
GB/T 35081-2018 Safety of machinery—Relationship of GB/T 16855.1 to GB/T 15706

American Welding Society (AWS), The relationship between hardness and

WRC 035:1957 The Tensile Properties of Selected Steels as a Function of Temperature
WRC 426:1997 Differential Design And Construction Cost Of Nuclear Power Plant Piping Systems As A Function Of Seismic Intensity And Time Period Of Construction
WRC 358:1990 The Effect Of Crack Depth To Specimen Width Ratio On The Elastic-Plastic Fracture Toughness Of A High-Strength Low-Strain Hardening Steel

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The relationship between hardness and

GB/T 231.2-2002 Metallic brinell hardness test--Part 2: Verification and calibration of hardness testers
GB/T 32660.2-2016 Metallic materials.Webster hardness test.Part 2:Verification and calibration of hardness testers
GB/T 17394.2-2022 Metallic materials—Leeb hardness test—Part 2: Verification and calibration of hardness testers
GB/T 231.2-2022 Metallic materials—Brinell hardness test—Part 2: Verification and calibration of testing machines
GB/T 18449.2-2012 Metallic materials.Knoop hardness test.Part 2:Verification and calibration of testing machines
GB/T 4340.2-2012 Metallic materials.Vickers hardness test.Part 2:Verification and calibration of testing machines
GB/T 231.2-2012 Metallic materials.Brinell hardness test.Part 2:Verification and calibration of testing machines
GB/T 17394.2-2012 Metallic materials.Leeb hardness test.Part 2:Verification and calibration of hardness testers
GB/T 230.2-2022 Metallic materials—Rockwell hardness test—Part 2: Verification and calibration of testing machines and indenters
GB/Z 42533-2023 The theoretical correlation method between the cleanliness of the hydraulic transmission system and the cleanliness and oil pollution of the components that make up the system
GB/T 230.2-2002 Metallic Rockwell hardness test--Part 2: Verification and calibration of hardness testers(scales A,B,C,D,E,F,G,H,K,N,T)
GB/T 7582-2004 Acoustics-Statistical distribution of hearing thresholds as a function of age
GB/T 230.2-2012 Metallic materials.Rockwell hardness test.Part 2:Verification and calibration of testing machines(scale A,B,C,D,E,F,G,H,K,N,T)
GB/T 20673-2006 Cellular plastics Determination of the coefficient of linear thermal expansion of rigid material s at sub-ambient temperatures
GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
GB/T 19876-2005 Safety of machinery.Positioning of protective equipment with respect to the approach speeds of parts of the human body
GB/T 7582-1987 Acoustics--Threshold of hearing by air conduction as a function of age and sex for otologically normal persons

WRC - Welding Research Council, The relationship between hardness and

BULLETIN 35-1957 THE TENSILE PROPERTIES OF SELECTED STEELS AS A FUNCTION OF TEMPERATURE
BULLETIN 358-1990 THE EFFECT OF CRACK DEPTH TO SPECIMEN WIDTH RATIO ON THE ELASTIC-PLASTIC FRACTURE TOUGHNESS OF A HIGH-STRENGTH LOW-STRAIN HARDENING STEEL

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The relationship between hardness and

ASHRAE 4204-1998 Sampling Interval Magnitude Relation to Digital PI Control System Performance
ASHRAE GUIDELINE 12 ERTA-2010 Minimizing the Risk of Legionellosis Associated with Building Water Systems
ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities
ASHRAE SF-98-25-6-1998 Low-Frequency Vibrations Associated with Fan Discharge Grille System
ASHRAE QC-06-009-2006 Relationship between Energy Wheel Speed and Effectiveness and its Transient Response@ Part 1: Mathematical Development of the Characteristic Time Constants and Their Relationship with Effectiveness
ASHRAE CH-93-16-1993 Interrelation of Refrigeration@ HVAC@ and Energy Use in Supermarkets
ASHRAE 12P-1999 Minimizing the Risk of Legionellosis Associated with Building Water Systems (First Public Review)
ASHRAE CH-99-9-4-1999 Engineering and Specifications for HVAC Systems Relating to Testing and Balancing
ASHRAE 4164-1998 Relationships between the Indoor Environment and Productivity: a Literature Review (RP-700)

VN-TCVN, The relationship between hardness and

TCVN 258-2-2007 Metallic materials.Vickers hardness test.Part 2:Test merhod
TCVN 256-2-2006 Metallic materials.Brinell hardness test.Part 2:Verification and calibration of testing machines

International Telecommunication Union (ITU), The relationship between hardness and

ITU-T G.225-1988 Recommendations relating to the accuracy of carrier frequencies
ITU-T G.221-1988 Overall recommendations relating to carrier-transmission systems
ITU-R INFORME 1167 SPANISH-1990 STUDY ON GENERAL QUESTIONS RELATING TO THE GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM EXAMEN DE CUESTIONES GENERALES RELACIONADAS CON EL SISTEMA MUNDIAL DE SOCORRO Y SEGURIDAD MAR蚑IMOS
ITU-R RAPPORT 1167 FRENCH-1990 STUDY ON GENERAL QUESTIONS RELATING TO THE GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM ETUDE DE QUESTIONS GENERALES RELATIVES AU SYSTEME MONDIAL DE DETRESSE ET DE SECURITE EN MER
ITU-T R.50 FRENCH-1988 TOLERABLE LIMITS FOR THE DEGREE OF ISOCHRONOUS DISTORTION OF CODE - INDEPENDENT 50-BAUD TELEGRAPH CIRCUITS
ITU-T R.50 SPANISH-1988 TOLERABLE LIMITS FOR THE DEGREE OF ISOCHRONOUS DISTORTION OF CODE - INDEPENDENT 50-BAUD TELEGRAPH CIRCUITS
ITU-T E.800 SUPP 2-1988 Curves showing the relation between the traffic offered and the number of circuits
ITU-R SA.1155-1995 Protection Criteria Related to the Operation of Data Relay Satellite Systems
ITU-R SA.1155 FRENCH-1995 Protection Criteria Related to the Operation of Data Relay Satellite Systems
ITU-R SA.1155 SPANISH-1995 Protection Criteria Related to the Operation of Data Relay Satellite Systems
ITU-R SA.1155-2017 Protection criteria related to the operation of data relay satellite systems
ITU-R P.678-2015 Characterization of the variability of propagation phenomena and estimation of the risk associated with propagation margin
ITU-T G.957 FRENCH-2006 Optical interfaces for equipments and systems relating to the synchronous digital hierarchy Study Group 15
ITU-T Q.1930 FRENCH-2002 BICC access network protocol
ITU-T G SUPP 42-2014 Guide on the use of the ITU-T Recommendations related to optical fibres and systems technology

Taiwan Provincial Standard of the People's Republic of China, The relationship between hardness and

CNS 4448-1992 Method of Test for Stiffness in Torsion of Plastics as a Function of Temperature
CNS 11777-1-2005 Method of test for moisture–density relations of soils（Modified effort method）
CNS 11777-2005 Method of test for moisture–density relations of soils（Standard effort method）
CNS 11777.1-2005 Method of test for moisture–density relations of soils（Modified effort method）

IN-BIS, The relationship between hardness and

PH-BPS, The relationship between hardness and

PNS ISO/TR 22100-2:2021 Safety of machinery - Relationship with ISO 12100 - Part 2: How ISO 12100 relates to ISO 13849-1
PNS ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards

HU-MSZT, The relationship between hardness and

SE-SIS, The relationship between hardness and

SIS 65 00 96-1966 Textiles. Determination of colour fastness to rubbing with organic solvents.
SIS SS CECC 00800-1988 Code of practice on the use of the ppm approach in association with the CECC system
SIS SS 15 51 72-1983 Petroleum products - Determination and application of precision data in relation to methods of test
SIS SMS 2952-1971 Definition of terms concerning the measurement of the thickness of metallic and other non-organic coatings

The American Road & Transportation Builders Association, The relationship between hardness and

AASHTO T 134-2005 Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures

(U.S.) Ford Automotive Standards, The relationship between hardness and

FORD WSB-M4D889-A1-2011 POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2D412-A-2010 SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D274-A-2004 NITRILE BUTADIENE RUBBER- 90 DUROMETER"A" ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2D129-A-2004 FLUOROSILICONE RUBBER, 50 DUROMETER"A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D440-A3-2004 FLUOROELASTOMER (FKM), 75 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2D129-A-2009 FLUOROSILICONE RUBBER, 50 DUROMETER "A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D232-A-2004 EPICHLOROHYDRIN, RUBBER - 70 DUROMETER"A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D240-A-2004 FLUOROELASTOMER DIAPHRAGM, 70 DUROMETER"A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D182-A-2009 POLYURETHANE, CAST - 52 DUROMETER "D" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D232-A-2009 EPICHLOROHYDRIN, RUBBER - 70 DUROMETER "A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D240-A-2009 FLUOROELASTOMER DIAPHRAGM, 70 DUROMETER "A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D676-A1-2011 POLYVINYL CHLORIDE (PVC), FLEXIBLE 50 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D313-A3-2004 EPDM RUBBER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D889-A1-2006 POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D451-B1-2008 HYDROGENATED NITRILE (HNBR) RUBBER 80 DUROMETER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D313-A3-2009 EPDM RUBBER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D249-A3-2010 TUBING, SILICONE RUBBER, HIGH TEMPERATURE 70 HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SA-M4D9961-A-2007 POLYURETHANE ELASTOMER, SHORE HARDNESS D 60 - ***TO BE USED WITH FORD WSS-M99P1111***
FORD WSB-M4G348-A-2011 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D197-A1-2004 THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D197-A1-2009 THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D447-A3-2009 ETHYLENE/ACRYLIC (AEM) RUBBER, OIL RESISTANT, 60 HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Railway, The relationship between hardness and

TB/Z 8-1985 Relationship between Surface Roughness and Tolerance of Communication Signal Products

PT-IPQ, The relationship between hardness and

NP 48-1961

Association Francaise de Normalisation, The relationship between hardness and

NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
XP A89-536*XP ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength
NF EN 60524/A2:1998 Diviseur de tension à résistances en courant continu à rapports fixes
NF EN 60524:1993 Diviseur de tension à résistances en courant continu à rapports fixes
NF P94-048:1996 Sols : reconnaissance et essais - Détermination de la teneur en carbonate - Méthode du calcimètre
FD E48-697*FD ISO/TR 10686:2014 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
E66-504:1981 Cutting tool angles. General conversion formulae to relate tool and working angles.
NF E29-005:1991 Industrial pipework. Pressure/temperature ratios of standardize steel components. Values and validity limitations.
FD X10-045:2022 Relations entre mesures sensorielles et mesures instrumentales
XP P98-092-2:2000 Tests relating to the determination of expansion joints capacity - Verification of the flexion of road bridge roadway expansion joints - Part 2 : test method independent of temperature
NF E01-009:2021 Mechanical products - Collection and communication of data related to regulated substances of high concern
NF L17-250-6*NF EN 2262:1996 Aerospace series. Silicone rubber (vmq/pvmq) with high tear strenght. Hardness 50 irhd.
NF M07-033-1*NF EN ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test
NF EN ISO 4259-2:2017 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 2 : application des valeurs de fidélité relatives aux méthodes d'essai
NF EN ISO 4259-1:2017 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai
NF X44-101-2*NF EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2 : monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
NF A95-171*NF EN ISO 4492:2017 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
NF B51-141*NF EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
NF A95-171:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
NF E22-561:1986 Plain bearings. Hardness testing of bearing metals. Part 1 : compound meterials.
NF M07-033:2006 Petroleum products - Determination and application of precision data in relation to methods of test.
NF M07-033:1995 Petroleum products. Determination and application of precision data in relation to methods of test.
GA Z15-801:2004 Cards and associated systems - Basic functions and systems - Electronic signature associated with official government issued documents
NF M07-033-2*NF EN ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2 : interpretation and application of precision data in relation to methods of test
NF EN ISO 4259-1/A1:2019 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai - Amendement 1
NF EN ISO 4259-2/A1:2019 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 2 : application des valeurs de fidélité relatives aux méthodes d'essai - Amendement 1
NF EN ISO 4259-1/A2:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai - Amendement 2
NF EN ISO 24502:2011 Ergonomie - Conception accessible - Spécification du contraste de luminance lié à l'âge pour la lumière colorée
NF EN 61326-3-1:2017 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 3-1 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à l...
NF EN IEC 61326-3-2:2018 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 3-2 : exigences d'immunité pour les systèmes relatifs à la sécurité et pour les matériels destinés à réaliser des fonctions relatives à la ...
NF EN ISO 105-A08:2003 Textiles - Essais de solidité des teintures - Partie A08 : vocabulaire relatif au mesurage de la couleur
NF EN ISO 15175:2018 Qualité du sol - Caractérisation des sols pollués en relation avec la protection des eaus souterraines
NF EN ISO 13940:2016 Informatique de santé - Système de concepts relatifs à la continuité des soins
NF EN 62493:2015 Évaluation d'un équipement d'éclairage relativement à l'exposition humaine aux champs électromagnétiques
NF EN 62493/A1:2022 Évaluation d'un équipement d'éclairage relativement à l'exposition humaine aux champs électromagnétiques
NF M07-033-1/A2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test - Amendment 2
NF M07-033-1/A1*NF EN ISO 4259-1/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test - Amendment 1
XP F74-129-1999 Railway applications - Safety related electronic systems for signalling.
NF EN ISO 4259-3:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 3 : surveillance et vérification des données de fidélité publiées relatives aux méthodes d'essai
NF EN ISO 17718:2015 Farine et mouture complète de blé tendre (Triticum aestivum L.) - Détermination du comportement rhéologique des pâtes en fonction du pétrissage et de l'augmentation de la température
NF T47-127*NF EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
L06-450:1994 Aerospace series. Heat treatment installations. Requirements relating to pyrometry.
NF M07-033-3*NF EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3 : monitoring and verification of published precision data in relation to methods of test
NF M07-033-2/A1*NF EN ISO 4259-2/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 2 : interpretation and application of precision data in relation to methods of test - Amendment 1

RU-GOST R, The relationship between hardness and

GOST 8.516-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness of metals according on Shore D hardness scale
GOST 8.516-1984 State system for ensuring the uniformity of measurments. State verification schedule for means of metal hardness testing on Shore scale D
GOST R 57174-2016 Hydraulic fluid power. Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
GOST R 52710-2007 Abrasive tools. Acoustic method for determination of hardness and sound indices by reduced acoustic wave velocity
GOST R 59506-2021 Safety of machinery. Security aspects related to functional safety of safety-related control systems
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST R ISO 24502-2012 Ergonomics design. Specification of age-related luminance contrast for coloured light
GOST 8.064-1994 State system for ensuring the uniformity of measurements. State verification shedule for means measuring hardness on Rockwell and Super-Rockwell scales
GOST 8.064-1979 State system for ensuring the uniformity of measurements. The state special standard of unit of hardness on rockwell and super-rockwell scales

ESDU - Engineering Sciences Data Unit, The relationship between hardness and

AERO 00.01.08 A-1982 Specific heat capacities and their ratio as functions of temperature for several common gases.
ESDU 78012 B-1996 Height relationships for non-standard atmospheres.
ESDU 88008-1988 Fatigue limit of unnotched steels (related to tensile strength).
ESDU 66018 A-1978 The relation between sound pressure level and r.m.s. fluctuating pressure.

TR-TSE, The relationship between hardness and

TS 2256-1976 LIMITS AND FITS — SERIES OF ANGLES AND SLOPES ON WEDGES AND PRISMS
TS 3391-1979 NOMINAL PRESSURES AND MATERIALS IN PIPING SYSTEMS BELATED TO OPERATING PRESSURES AND TEMPERATURES

Indonesia Standards, The relationship between hardness and

SNI 6886-2012 Metode uji penentuan hubungan kadar air dan densitas campuran tanah-semen
SNI 03-1757-1990 Crushed stones or natural gravels as foundation of road hardening and agregate for concrete, Determination of hardness by Rudellof pressure vesels

German Institute for Standardization, The relationship between hardness and

DIN ISO/TR 22100-2:2014-09*DIN SPEC 33887:2014-09 Safety of machinery - Relationship with ISO 12100 - Part 2: How ISO 12100 relates to ISO 13849-1 (ISO/TR 22100-2:2013)
DIN 54500:2004 Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials
DIN ISO 4492:1987 Metallic powders, excluding powders for hardmetals; determination of dimensional changes associated with compacting and sintering; identical with ISO 4492, edition 1985
DIN 15578-2:1978-07 Length-measuring of perforated motion-picture films and magnetic tapes; tabels of running times 1 to 60 s in relation to film length
DIN ISO 1505:1994-09 Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths; identical with ISO 1505:1993
DIN EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN ISO 4501:1994-05 Hardmetals; determination of titanium; photometric peroxide method; identical with ISO 4501:1978
DIN 15578-3:1978-07 Length-measuring of perforated motion-picture films and magnetic tapes; tables of running times 1 to 120 min in relation to film length
DIN 51563:2011-04 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
DIN 7805-6:2020-02 Tyres for commercial vehicles and their trailers - Part 6: Relationship between load-carrying capacity and speed
DIN 54500:2008-09 Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials
DIN CEN ISO/TR 22100-1:2021-09 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021); German version CEN ISO/TR 22100-1:2021
DIN 51200:2016-08 Materials testing machines - Design and application of holding devices for test pieces in hardness testing machines
DIN EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995
DIN EN 318:2002-06 Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; German version EN 318:2002
DIN EN ISO 4492:2018-03 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017); German version EN ISO 4492:2017
DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN ISO/TS 17845:2005 Welding and allied processes - Designation system for imperfections (ISO/TS 17845:2004); Trilingual version CEN ISO/TS 17845:2004
DIN 55540-1 Beiblatt 1:1979-01 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN EN ISO 4259-2:2020-02 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017 + Amd 1:2019); German version EN ISO 4259-2:2017 + A1:2019
DIN EN ISO 24502:2011-04 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010); German version EN ISO 24502:2010
DIN EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD; German and English version EN 3697:2013
DIN EN ISO 4492:2018 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
DIN EN ISO 4259-3:2020-08 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020); German version EN ISO 4259-3:2020

FI-SFS, The relationship between hardness and

US-FCR, The relationship between hardness and

FCR AF I65-401-1994 RELATIONS WITH THE GENERAL ACCOUNTING OFFICE

Danish Standards Foundation, The relationship between hardness and

DS-hæfte 1:2013 Standards and their relations to EEC directives
DS-hæfte 1:2021 Standards and their relations to EEC directives
DS/ISO 7657:1992 Pipework. Stripwound flexible metal hoses. Specifications and temperature-related. Requirements for use
DS-hæfte 1-1:2013 Standards and their relations to EEC directives - Low voltage equipment
DS-hæfte 1-1:2021 Standards and their relations to EEC directives – Low voltage equipment
DS/ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards
DS/EN 318:1993 Fibreboards. Determination of dimensional changes associated with changes in relative humidity
DS/EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
DS/EN 24492:1994 Metallic powders,excluding powders for hardmetals-Determination of dimensional changes associated with compacting and sintering
DS/EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
DS/CEN ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
DS/IEC TR 63226:2021 Managing fire risk related to photovoltaic (PV) systems on buildings
DS 1103.8:1982 Test methods for rigid flat sheets. Dimensional changes associated with changes in relative humidity
DS/ISO 3968:1989 Hydraulic fluid power. Filters. Evaluation of pressure drop versus flow characteristics
DS/ISO 7029:1992 Acoustics. Threshold of hearing by air conduction as a function of age and sex for otologically normal persons

RO-ASRO, The relationship between hardness and

STAS 10275/5-1982 PLASTER Determination of hardness and diffusion coefficient
STAS 7196-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at traction paraliel to surface board

European Committee for Standardization (CEN), The relationship between hardness and

EN ISO 4492:2017 Metallic powders@ excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering
EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering [Superseded: CEN EN 24492]
prCEN ISO/TR 19441 Petroleum products - Density vs. temperature relationships of current fuels, biofuels and biofuel components
EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
EN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
EN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
EN 318:1993 Fibreboards - Determination of Dimensional Changes Associated with Changes in Relative Humidity
CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
EN 24492:1993 Metallic Powders, Excluding Powders for Hardmetals - Determination of Dimensional Changes Associated with Compacting and Sintering (ISO 4492: 1985)
EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
EN ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
EN ISO 4259-1:2017/A2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 2 (ISO 4259-1:2017/Amd 2:2020)
EN ISO 4259-1:2017/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019)

Professional Standard - Petrochemical Industry, The relationship between hardness and

SH/T 0732-2004 Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature-scanning technique

GM Daewoo, The relationship between hardness and

GMKOREA EDS-T-7678-2011

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, The relationship between hardness and

JEDEC JEP70C-2013 Guide to Standards and Publications Relating to Quality and Reliability of Electronic Hardware

ES-AENOR, The relationship between hardness and

UNE 7 177

(U.S.) Plastic Pipe Association, The relationship between hardness and

PPI TR-47-2011 Pipe Stiffness and Flattening Tests in Coilable HDPE Conduit; and Its Relationship to Burial Depth in Conduit Applications

YU-JUS, The relationship between hardness and

JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process
JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades

Professional Standard - Chemical Industry, The relationship between hardness and

HG/T 20703.2-2000 The relationship between materials major and other majors
HG/T 20704.2-2000 The relationship between the engineering design stage of the machine pump specialty and various specialties

Society of Automotive Engineers (SAE), The relationship between hardness and

SAE ARP7495-2020 Methods to Address Specific Issues Related to COTS Electronic Components in Airborne Electronic Hardware
SAE J877-1997 Properties of Low Carbon Sheet Steel and Their Relationship to Formability
SAE RS-407-1-1951 RS407 Relation of Sprocket to Guard. Non-Reversible Chain
SAE J885-2003 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
SAE J885A-1966 HUMAN TOLERANCE TO IMPACT CONDITIONS AS RELATED TO MOTOR VEHICLE DESIGN
SAE AIR5615-2013 Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires
SAE AIR5615A-2020 Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires

Institute of Electrical and Electronics Engineers (IEEE), The relationship between hardness and

IEEE 2889-2021 IEEE Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation
IEEE Std 2889-2021 IEEE Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation
IEEE P1012/D17, August 2015 IEEE Approved Draft Standard for System, Software and Hardware Verification and Validation
IEEE Std C37.90-1989 Relays and relay systems associated with electric power apparatus
IEEE Std C37.90-2005 Relays and relay systems associated with electric power apparatus
IEEE P2889/D0.05, August 2021 IEEE Approved Draft Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation
ANSI/IEEE Std C37.90-1989 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE Std C37.90-1978 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
ANSI/IEEE C37.90-1978 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus

American Gear Manufacturers Association, The relationship between hardness and

AGMA 14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life

AGMA - American Gear Manufacturers Association, The relationship between hardness and

14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life
97FTM9-1997 Relations Between Wear and Pitting Phenomena in Worm Gears

VE-FONDONORMA, The relationship between hardness and

Japanese Industrial Standards Committee (JISC), The relationship between hardness and

JIS W 0125-3:2000 Aerospace -- Fluid systems -- Vocabulary -- Part 3: General terms and definitions relating to temperature
JIS B 9920-2:2019 Cleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
JIS B 8361:2000 Hydraulic fluid power -- General rules relating to systems
JIS B 8370:2000 Pneumatic fluid power -- General rules relating to systems

CEN - European Committee for Standardization, The relationship between hardness and

EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components
CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
EN ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
EN ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test

API - American Petroleum Institute, The relationship between hardness and

API PUBL 4554-1993 Study of the Relationship between Folate Status and Methanol Toxicity
API REPORT 90-48-1991 Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures
API REPORT 92-48-1994 Growth Rate of Short Fatigue Cracks as Relevant to Higher Strength Steels for Offshore Structures
API PUBL 27-30700- STUDIES ON THE EVALUATION OF PROBLEMS ASSOCIATED WITH THE MEASUREMENT OF LOW CONCENTRATIONS OF CARBOXYHEMOGLOBIN

Shanghai Provincial Standard of the People's Republic of China, The relationship between hardness and

DB31/ 12-1998 Evaluation of Cosmetics and Dermatological Causes

SAE - SAE International, The relationship between hardness and

SAE AIR4366-1996 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning
SAE AIR4366A-2007 Issues and Concerns Associated with Electronic Propulsion Control System Partitioning
SAE J877-1963 Properties of Low Carbon Steel Sheets and Strip and Their Relationship to Formability
SAE J877-1984 Properties of Low Carbon Sheet Steel and Their Relationship to Formability
SAE J885-1964 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
SAE J885-1986 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design@ Information Report
SAE J885-2011 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
SAE J885-1980 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
SAE AS9121A-2007 Stockist Distributors Quality System Questionnaire Associated with AS9120
SAE AS9121B-2012 Stockist Distributors Quality System Questionnaire Associated with AS9120
SAE AIR5615-2007 Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires

Standard Association of Australia （SAA）, The relationship between hardness and

AS 1012.3.2:1998 Methods of testing concrete - Determination of properties related to the consistency of concrete - Compacting factor test
AS 2891.8:2005 Methods of sampling and testing asphalt - Voids and density relationships for compacted asphalt mixes
AS 1012.3.2:1998(R2014)
AS 1012.3.3:1998(R2014)
AS 1012.3.1:2014 Methods of testing concrete, Method 3.1: Determination of properties related to the consistency of concrete — Slump test

American Nuclear Society (ANS), The relationship between hardness and

ANS 58.3-1992 Physical Protection for Nuclear Safety-Related Systems and Components
ANS 58.9-1981 Single failure criteria for light water reactor safety-related fluid systems
ANS 59.51-1997 Fuel Oil Systems for Safety-Related Emergency Diesel Generators
ANS 59.52-1998 Lubricating Oil Systems for Safety-Related Emergency Diesel Generators

ES-UNE, The relationship between hardness and

UNE-CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021) (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN ISO 4259-1:2018 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)
UNE-EN ISO 4492:2018 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
UNE-EN ISO 4259-2:2018 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)
UNE-EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 4259-1:2018/A2:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 2 (ISO 4259-1:2017/Amd 2:2020)
UNE-EN ISO 4259-1:2018/A1:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
UNE-EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
UNE-EN ISO 4259-2:2018/A1:2020 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)

AT-ON, The relationship between hardness and

ONORM EN 27029-1991 Acoustics - Threshold ofhearing by air conduction as a function ofage and sex of otologically normal persons
ONORM EN 318-1993 Fibreboards - Determination of dimensional changes associated with changes in relative humidity
ONR CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
ONORM ENV 41802-2-1993 Information Systems Interconnection - X.25 Protocol Relaying - LAN Subnetwork dependant media independent requirements
ONORM M 7425-2001 Temperature controls and limit switches for heat generating systems

Instrument Society of America (ISA), The relationship between hardness and

ISA TR84.00.09-2013 Security Countermeasures Related to Safety Instrumented Systems (SIS)

ANS - American Nuclear Society, The relationship between hardness and

59.1-1979 SAFETY RELATED COOLING WATER SYSTEMS IN NUCLEAR POWER PLANTS

Professional Standard - Aviation, The relationship between hardness and

HB/Z 251-1993 Relationship between tightening torque and axial force of bolted connection

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, The relationship between hardness and

REPORT BT.959-2-1990 Experimental results relating picture quality to objective magnitude of impairment
REPORT 1167-1990 STUDY ON GENERAL QUESTIONS RELATING TO THE GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM
ITU-R SA.1155-2-2017 Protection criteria related to the operation of data relay satellite systems
ITU-R P.678-2-2013 Characterization of the variability of propagation phenomena and estimation of the risk associated with propagation margin

Association of German Mechanical Engineers, The relationship between hardness and

VDI 2310 Blatt 12-2004 Maximum ambient concentrations referring to human health - Maximum ambient concentrations for nitrogen dioxide
VDI 2310 Blatt 15-2001 Maximum immission values referring to human health - Maximum immission concentrations for ozone

TH-TISI, The relationship between hardness and

TIS 2170.2-2004 Brinell hardness test for metallic materials.part 2: verification and calibration of testing machines

AENOR, The relationship between hardness and

UNE-EN 2262:1996 AEROSPACE SERIES. SILICONE RUBBER (VMQ/PVMQ) WITH HIGH TEAR STRENGTH. HARDNESS 50 IRHD.
UNE-EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity.
UNE-EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)

Lithuanian Standards Office , The relationship between hardness and

LST EN 318-2003 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
LST EN 24492-2000 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985)

IT-UNI, The relationship between hardness and

UNI EN ISO 4259-1:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test

JSAE - Society of Automotive Engineers of Japan@ Inc., The relationship between hardness and

JASO D801-1996 Glossary of Terms Relating to Electronic Systems and Parts for Automobiles

Professional Standard - Agriculture, The relationship between hardness and

CNAS-AL23-2020 Relationship between good laboratory practice and laboratory accreditation

GB-REG, The relationship between hardness and

REG NASA-LLIS-0896-2000 Lessons Learned ?Minimizing Impacts Associated with Construction Operations at Mission Critical Facilities
REG NASA-LLIS-1399-2003 Lessons Learned ?Program and Project Management: Center-to-Center Relations
REG 29 CFR PART 406-2011 REPORTING BY LABOR RELATIONS CONSULTANTS AND OTHER PERSONS, CERTAIN AGREEMENTS WITH EMPLOYERS

未注明发布机构, The relationship between hardness and

SAE J885-201102 HUMAN TOLERANCE TO IMPACT CONDITIONS AS RELATED TO MOTOR VEHICLE DESIGN

EU/EC - European Union/Commission Legislative Documents, The relationship between hardness and

2016/919-2016 REGULATIONS COMMISSION REGULATION on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union (Text with EEA relevance)
2011/229/EU-2011 DECISIONS COMMISSION DECISION of concerning the technical specifications of interoperability relating to the subsystem ‘rolling stock – noise’ of the trans-European conventional rail system (Text with EEA relevance; notified under document C(2011) 658)

International Electrotechnical Commission (IEC), The relationship between hardness and

IEC TR 63074:2019 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC TS 63074:2023 Safety of machinery - Security aspects related to functional safety of safety-related control systems
IEC TR 62195:2000 Power system control and associated communications - Deregulated energy market communciations
IEC TR 63226:2021 Managing fire risk related to photovoltaic (PV) systems on buildings

KR-KS, The relationship between hardness and

KS D ISO 4492-2019 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering
KS C IEC TR 63074-2023 Safety of machinery — Security aspects related to functional safety of safety-related control systems
KS M ISO 4259-2-2021 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
KS M ISO 4259-3-2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test

American National Standards Institute （ANSI), The relationship between hardness and

ANSI/SCTE 17-2007 Test Procedure for Carrier to Noise (C/N, CCN, CIN, CTN)
ASHRAE Guideline 12-2023 Managing the Risk of Legionellosis Associated with Building Water Systems
ANSI/ASAE D241.4-1993 Density, Specific Gravity, and Weight Moisture Relationships of Grain for Storage

GM North America, The relationship between hardness and

GM 9984157-2003 Topcoat System High Solids Basecoat, 2K Urethane Clearcoat
GM 9984159-2003 Topcoat System High Solids Basecoat, 2K Non-Urethane Clearcoat [Replaced: GMNA 9984104]

Aerospace, Security and Defence Industries Association of Europe (ASD), The relationship between hardness and

ASD-STAN PREN 2113-1989 Aerospace Series Chloroprene - Rubber (CR) Hardness 80 IRHD
ASD-STAN PREN 2566-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 70 IRHD (Edition P 1)
ASD-STAN PREN 2567-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 80 IRHD (Edition P 1)
ASD-STAN PREN 2568-1995 Aerospace Series Fluorocarbon Rubber (FPM) Hardness 90 IRHD (Edition P 1)
ASD-STAN PREN 2259-1994 Aerospace Series Silicone Rubber (VMQ) Hardness 50 IRHD (Edition 1)
ASD-STAN PREN 2260-1994 Aerospace Series Silicone Rubber (VMQ) Hardness 60 IRHD (Edition 1)
ASD-STAN PREN 2261-1994 Aerospace Series Silicone Rubber (VMQ) Hardness 70 IRHD (Edition 1)
ASD-STAN PREN 2109-1978 Chloroprene Rubber (CR) Hardness 40 Characteristics Aerospace Series (Edition 1)
ASD-STAN PREN 2428-1994 Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 50 IRHD (Edition 1)
ASD-STAN PREN 2429-1994 Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD (Edition 1)
ASD-STAN PREN 2430-1994 Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 70 IRHD (Edition 1)
ASD-STAN PREN 2431-1994 Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 80 IRHD (Edition 1)
ASD-STAN PREN 2432-1994 Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 90 IRHD (Edition 1)
ASD-STAN PREN 3825-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 60 IRHD (Edition P 1)
ASD-STAN PREN 3826-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 70 IRHD (Edition P 1)
ASD-STAN PREN 3827-2006 Aerospace series Fluorosilicone rubber (FVMQ) Hardness 80 IRHD (Edition P 1)

U.S. Air Force, The relationship between hardness and

AIR FORCE MIL-HDBK-1599 A ADMIN NOTICE 2-2006 BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS
AIR FORCE MIL-HDBK-1599 A CHG NOTICE 1-1999 BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS

Group Standards of the People's Republic of China, The relationship between hardness and

T/SZFA 2004.1-2023 Ergonomic evaluation of sofa — Part 1：Test and evaluation method of sofa hardness rating

US-CFR-file, The relationship between hardness and

CFR 17-75.14-2014 Commodity and Securities Exchanges. Part75:Proprietary trading and certain interests in and relationships with covered funds. Section75.14:Limitations on relationships with a covered fund.

CZ-CSN, The relationship between hardness and

CSN 49 0181-1986 Plywood. Method of identifying linnar ilimension changes in rclation tu relative air humidity
CSN 34 0035-1969 Deviations from nominal voltages in A. C. systems.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., The relationship between hardness and

IEEE 55-1953 Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment
IEEE C37.90-1989 Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE C37.90-1978 RELAYS AND RELAY SYSTEMS ASSOCIATED WITH ELECTRIC POWER APPARATUS (R 1982)
IEEE C37.90-2005 Standard for Relays and Relay Systems Associated with Electric Power Apparatus

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The relationship between hardness and

ASHRAE GUIDELINE 12 ADD B-2021 Managing the Risk of Legionellosis Associated with Building Water Systems

IX-EU/EC, The relationship between hardness and

87/344/EEC-1987 Council Directive on the Coordination of Laws, Regulations and Administrative Provisions Relating to Legal Expenses Insurance

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, The relationship between hardness and

ITU-T G.957-2006 Optical interfaces for equipments and systems relating to the synchronous digital hierarchy (Study Group 15)
ITU-T G.972-2016 Definition of terms relevant to optical fibre submarine cable systems (Study Group 15)
SERIES E.800 SUPP 2-1988 Curves showing the relation between the traffic offered and the number of circuits required

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The relationship between hardness and

GB/T 33139-2016 Ships and marine technology—Maintenance and testing to reduce losses in critical systems for propulsion

ETSI - European Telecommunications Standards Institute, The relationship between hardness and

PRETS 300 232-1993 Transmission and Multiplexing (TM); Optical Interfaces for Equipments and Systems Relating to the Synchronous Digital Hierachy