ZH
RU
ES
High and low temperature test chamber
High and low temperature test chamber, Total:498 items.
In the international standard classification, High and low temperature test chamber involves: Environmental testing, TESTING, Mechanical testing, Energy and heat transfer engineering in general, Wind turbine systems and other alternative sources of energy, Fibre optic communications, Analytical chemistry, Thermodynamics and temperature measurements, Internal combustion engines for road vehicles, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Photography, Railway rolling stock, Electrical and electronic testing, Railway engineering in general, Rubber, Road vehicles in general, Test conditions and procedures in general, Kitchen equipment, Optics and optical measurements, Optical equipment, Road vehicle systems, Rails and railway components, Electrical accessories, Reinforced plastics, Iron and steel products, Aircraft and space vehicles in general, Electrical wires and cables, Lamps and related equipment, Printed circuits and boards, Refrigerating technology, On-board equipment and instruments, Aerospace electric equipment and systems, Corrosion of metals, Fluid storage devices, Valves, Products of the textile industry, Raw materials for rubber and plastics, Plastics, Lubricants, industrial oils and related products, Ceramics, Metrology and measurement in general, Linear and angular measurements, Pipeline components and pipelines, Rectifiers. Convertors. Stabilized power supply, Glass, Electromechanical components for electronic and telecommunications equipment, Shipbuilding and marine structures in general, Coals, Equipment for the chemical industry, Refractories, Manufacturing forming processes, Welding, brazing and soldering, Metalliferous minerals, Adhesives, Freight distribution of goods, Fuels, Footwear, Leather technology, Explosion protection, Terminology (principles and coordination), Optoelectronics. Laser equipment, Protection against fire, Semiconductor devices, Processes of the textile industry.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High and low temperature test chamber
- GB/T 10592-2008 Specifications for low/high temperature test chambers
- GB/T 10592-1989 Specification for low/high temperature test chambers
- GB/T 10592-2023 High and low temperature test chamber technical conditions
- GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
- GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
- GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
- GB/T 10589-2008(英文版) Specifications for low temperature test chambers
- GB/T 11158-2008(英文版) Specifications for high temperature test chambers
- GB/T 10589-1989 Specification for low temperature test chambers
- GB/T 10589-2008 Specification for low temperature test chambers
- GB/T 10590-1989 Specification for low temperature/low air pressure test chambers
- GB/T 11158-1989 Specification for high temperature test chambers
- GB/T 11158-2008 Specifications for high temperature test chambers
- GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
- GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
- GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
- GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
- GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
- GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
- GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
- GB/T 33861-2017(英文版) Test method of energy efficiency for temperature test chambers
- GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
- GB/T 14999.2-1994 Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
- GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
- GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
- GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
- GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
- GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
- GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
- GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
- GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
- GB/T 14999.1-1994 Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
- GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
- GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
- GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
- GB/T 13239-1991 Metallic materials--Tensile testing at low temperatures
- GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
- GB/T 12085.13-1989 Optics and optical instruments--Environmental test methods--Shock,bump or freefall,dry heat,cold
- GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
- GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
- GB/T 28958-2012 Test methods of low temperature performance for passenger car
- GB/T 4338-1995 Metallic materials--Tensile testing at elevated temperature
- GB/T 42653-2023 Test method for high temperature viscosity of glass
- GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
- GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
- GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
- GB/T 12085.13-2010 Optics and optical instruments.Environmental test methods.Part 13:Combined shock,bump or free fall and dry heat or cold
- GB/T 480-2000 Test for carbonization of coal in aluminum retort
- GB/T 1341-2001 Gray--King assay for coal
- GB/T 5564-1994 Rubber and plastics hoses--Subambient temperature flexibility tests
- GB/T 480-2010 Test method for aluminum retort low temperature carbonization of coal
- GB/T 13239-2006 Metallic materials.Tensile testing at low temperature
- GB/T 1341-2007 Gray-King assay of coal
- GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
- GB/T 11606.4-1989 The method of environmental test for analysical instruments--High temperature test
- GB/T 11606.14-1989 The method of environmental test for analytical insturments--Cold storage test
- GB/T 12085.15-2010 Optics and optical instruments.Environmental test methods.Part 15:Combined digitally controlled broad-band random vibration and dry heat or cold
- GB/T 2424.5-2006 Enviromental tests for electric and electronic products.Confirmation of the performance of temperature chambers
- GB/T 14999.4-1994 Methods of examining micro-structures for heat-resisting superalloys
- GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
- GB/T 16864-1997 Method for testing cryogenic transmissivity of crystals
- GB/T 5564-2006 Rubber and plastics hoses Subambient temperature flexibility tests
- GB/T 7392-1998 Series 1: Thermal containers--Specification and testing
- GB 6395-1986 Metallic materials--Stress rupture testing at elevated temperatures
- GB/T 19560-2008 Experimental method of high-pressure isothermal adsorption to coal
- GB/T 4338-2006 Metallic materials.Tensile testing at elevated temperature
- GB/T 3903.18-2008 Footwear.Test methods for uppers.High temperature behaviour
- GB/T 32368-2015 Measurement of resistance to elevated temperature and humidity for adhesive tapes
- GB/T 14999.2-2012 Test methods for superalloys.Part 2:Verification of transverse macro-structures and defect by etch
- GB/T 14999.1-2012 Test method for superal loys.Part 1:Verification of longitudinal macro-structures and defect by etch
- GB/T 32710.3-2016 Safety requirements for environmental testing and conditioning equipment.Part 3: Refrigerated baths
- GB/T 22888-2008 Leather.Physical and machanical tests.Determainition of cold crack temperature of surface coatings
- GB/T 11606.15-1989 The method of environmental test for analytical instruments--High temperature storage test
- GB/T 2424.6-2006 Environmental testing for electric and electronic products.Confirmation of the performance of temperature/humidity chambers
- GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
工业和信息化部/国家能源局, High and low temperature test chamber
- JB/T 13229-2017 High and low temperature environmental chamber for testing machine
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High and low temperature test chamber
- GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
- GB/T 32065.2-2015 Environmental test methods for oceanographic instruments—Part 2：Cold
Liaoning Provincial Standard of the People's Republic of China, High and low temperature test chamber
- DB21/T 2761-2017 High and low temperature test specification for wind power gearbox
American National Standards Institute （ANSI), High and low temperature test chamber
Professional Standard - Medicine, High and low temperature test chamber
Korean Agency for Technology and Standards (KATS), High and low temperature test chamber
- KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
- KS R 0016-1971 Method of high and low temperature test for automobile parts
- KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
- KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
- KS R 0016-2015 Method of high and low temperature test for automobile parts
- KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
- KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
- KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
- KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
- KS K 0766-2011 Test method for low temperature effect on coated cloth
- KS B 2821-2007(2022) Method for performance testing of low temperature valves
- KS K 0766-1986 Test method for low temperature effect on coated cloth
- KS B 2821-2007 Method for performance testing of low temperature valves
- KS K 0766-2017 Test method for low temperature effect on coated cloth
- KS V 0824-2011(2021) Temperature environmental test procedure for compressors and pumps under cryogenic condition
- KS B 2821-2007(2017) Method for performance testing of low temperature valves
- KS V ISO 21159:2020 Butterfly valves for use in low temperature applications —Design and testing requirements
- KS K 0766-2022 Test method for low temperature effect on coated cloth
- KS M 6724-2003 Testing methods for low temperature-retraction of vulcanized rubber
- KS M 6724-1986 Testing methods for low temperature-retraction of vulcanized rubber
- KS D 0412-2016 Test methods for corrosion in high pressure or high pressure and high temperature environment
- KS M ISO 2921:2009 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure(TR test)
- KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
- KS V 0824-2011(2016) Temperature environmental test procedure for compressors and pumps under cryogenic condition
- KS M ISO 2921:2014 Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS V ISO 18139:2019 Globe valves for use in low temperature applications — Design and testing requirements
- KS C IEC 60068-2-39:2002 Environmental testing－Part 2：Tests－Test Z/AMD：Combined sequential cold, low air pressure and damp heat test
- KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
- KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
- KS B 0800-1995 Test methods for Vickers hardness at elevated temperatures
- KS B 0800-2001(2021) Test methods for Vickers hardness at elevated temperatures
- KS M ISO 17703:2019 Footwear－Test methods for uppers－High temperature behaviour
- KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
- KS L 1599-2001 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methodfor tensile strength of monolithic ceramics at room and elevated temperature
- KS D 0412-2021 Test methods for corrosion in high pressure or high pressure and high temperature environment
- KS E ISO 13930:2008 Iron ores for blast furnace feedstocks-Determination of low-temperature reduction-disintegration indices by dynamic method
- KS M 6722-2008 Testing methods of torsional modules at low temperature for vulcanized rubbers
- KS E ISO 13930:2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS M 6722-1983 Testing methods of torsional modules at low temperature for vulcanized rubbers
- KS M ISO 17703:2004 Footwear－Test methods for uppers－High temperature behaviour
- KS K 0720-2007 Test method for colour fastness to high temperature steaming
- KS L 1608-2014(2019) Testing method for fracture toughness of fines ceramics at elevated temperature
- KS K 0720-1979 Test method for colour fastness to high temperature steaming
- KS K 0720-1987 Test method for colour fastness to high temperature steaming
TIA - Telecommunications Industry Association, High and low temperature test chamber
Taiwan Provincial Standard of the People's Republic of China, High and low temperature test chamber
- CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
- CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
- CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests
- CNS 6154-1988 Method of Test for Electromechanical Switches(High/Low Temperature Operation)
- CNS 13957-1997 Method of test for tensile strength of fine ceramics at room and elevated temperature
- CNS 10021-1983 Method of test for torsion under low temperature of vulcanized rubber (→CNS 3564)
- CNS 12866-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Cold/Low Air Pressure Tests
- CNS 8247-1988 Method of Low Temperature Test of Carburetors for Automobiles
- CNS 11233-1992 Basic Environmental Testing Procedures Part 2`75Test 3,Test A`75Cold
- CNS 12213-1988 Method of Test for Performance of Gear Lugricants in Axles at High Speed, Low Torque, Followed by Low Speed, High Torque
- CNS 13277-1993 Method of Test for Cold Filter Plugging Point of Distillate Fuels
- CNS 14142-1998 Methods of test for adaptation assessment of fine ceramics under high temperature and high pressure
- CNS 13956-1997 Method of test for elastic modulus of fine ceramics at elevated temperature
- CNS 9022-1999 Methos of test for colour fastness to high temperature steaming
- CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
- CNS 14144-1998 Methods of test for fracture toughness of fine ceramics at elevated temperature
- CNS 8246-1988 Method of Hot Soak Test of Carburetors for Automobiles
(U.S.) Telecommunications Industries Association , High and low temperature test chamber
Professional Standard - Aviation Industry, High and low temperature test chamber
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
RU-GOST R, High and low temperature test chamber
- GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
- GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
- GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
- GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
- GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
- GOST 11150-1984 Metals. Methods of tension tests at low temperatures
- GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
- GOST 26126-1984 Non-destructive testing brazed and soldered joints. Ultrasonic methods for inspection of quality
- GOST 19040-1981 Metal tubes. Method of tension test at high temperatures
- GOST R ISO 17703-2017 Footwear. Test methods for uppers. High temperature behaviour
Professional Standard - Electron, High and low temperature test chamber
- SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
- SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
- SJ/T 10186-1991 Testing equipment,series Y73,for Change of temperature.two chambers
- SJ/T 10187-1991 Testing equipment,series Y73 for Change of temperature.one chamber
- SJ/T 31388-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature moisture-heat test chambers
- SJ/Z 9001.44-1987 Basic environmental testing procedures--Part 3: Background information--Section One:Cold and dry heat tests
- SJ 2327-1983 Generic specification for low temperature test chambers
- SJ/T 31391-1994 Requirements of readiness and methods of inspection and assessment for constant temperature test chambers
- SJ 2328-1983 Generic specification for high temperature test chambers
- SJ/T 31390-1994 Requirements of readiness and methods of inspection and assessment for temperature cycling test chambers
Professional Standard - Aviation, High and low temperature test chamber
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
- HB 6783.4-1993 Military Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature-Altitude Test Chamber (Chamber)
- HB 6783.13-1993 Military airborne equipment climate environment test box (room) verification method temperature-humidity-altitude test box (room)
- HB 6744-1993 Test method for low temperature flexure of room temperature vulcanizing sealants
- HB 7122.2-1994 Civil Aircraft Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature and Altitude Test Chamber (Chamber)
- HB 5274-1993 Test method for low temperature flexibility of room temperature vulcanizing sealants
- HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
- HB 5195-1981 High temperature tensile test method for metals
- HB 5195-1996 High temperature tensile test method for metals
- HB 7571-1997 High temperature compression test method for metals
- HB 5213-1982 High Temperature Shear Test Method for Metals
- HB 6783.3-1993 Military airborne equipment climate environment test chamber (room) verification method temperature test chamber (room)
- HB 5278-1984 Test method for low temperature impact toughness of metals
- HB 5150-1980 High temperature tensile durability test method for metals
- HB 5212-1982 Test method for high temperature modulus of elasticity of metals
- HB 5150-1996 High temperature tensile durability test method for metals
- HB 5151-1996 High temperature tensile creep test method for metals
- HB 5207-1982 High temperature cycle durability test method for metals
- HB 5211-1982 High temperature tensile test method for metal pipes
- HB 5151-1980 High temperature tensile creep test method for metals
- HB 5321-1993 Test method for low temperature strength of anaerobic adhesives for aviation
- HB 7122.3-1994 Civil aircraft airborne equipment climate environment test chamber (room) verification method temperature and humidity test chamber (room)
- HB 6783.2-1993 Military airborne equipment climate environment test chamber (room) verification method Low pressure (altitude) test chamber (room)
HU-MSZT, High and low temperature test chamber
Professional Standard - Machinery, High and low temperature test chamber
- JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
- JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
- JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
- JB/T 12003-2014 Specification for valve cryogenic test rig
- JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 8: Low temperature test oven
- JB/T 5847-1991 Guideline for high temperature blocking test method
- JB/T 3356.1-1999 Performance test methods for cryogenic liquid containers
- JB/T 6247-1992 Bending strength at high temperature of shell - Tester
- JB/T 4153-1999 Test method for high temperature permeability of shell
- JB/T 11583-2013 High temperature furnace used for testing machines.Technical specification
- JB/T 9444.2-1999 Basic environmental testing method of copying machines - Test A: Low temperature test
- JB/T 9444.3-1999 Basic environmental testing method of copying machines - Test B: High temperature test
Professional Standard - Military and Civilian Products, High and low temperature test chamber
- WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments
- WJ 748-1994 Low temperature test method for adhesives used in optical instruments
- WJ 747-1994 High temperature test method for adhesives used in optical instruments
工业和信息化部, High and low temperature test chamber
- WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
- JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
- JB/T 13808-2020 High temperature hydrogen environment testing machine
- WJ/T 748-2014 Low temperature test method for glue used in optical instruments
- WJ/T 747-2014 High temperature test method for glue used in optical instruments
国家市场监督管理总局、中国国家标准化管理委员会, High and low temperature test chamber
- GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
- GB/T 39933-2021 Rotational moulding—Test method for low temperature impact
- GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test)
- GB/T 22888-2021 Leather—Physical and mechanical tests—Determination of cold crack temperature of surface coatings
- GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3: Method of test at low temperature
Professional Standard - Ocean, High and low temperature test chamber
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
- HY 016.2-1992 Low temperature test for basic environmental test methods for marine instruments
- HY 016.4-1992 High temperature test for basic environmental test methods for marine instruments
- HY 016.3-1992 Basic environmental test methods for marine instruments Low temperature storage test
Professional Standard - Railway, High and low temperature test chamber
- TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
- TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products
CZ-CSN, High and low temperature test chamber
Association Francaise de Normalisation, High and low temperature test chamber
- NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
- NF D38-311:1996 Household refrigerating appliances. Refrigerators with or without low-temperature compartment. Characteristics and test methods.
- NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
- NF C20-701/A1:1993 Environmental testing - Part 2 : tests - Tests A : cold.
- NF C20-701:1993 Environmental testing - Part 2 : tests - Tests A : cold.
- NF C20-701/A2:1995 Environmental testing - Part 2 : tests - Tests A : cold.
- NF L52-400-405*NF EN 3745-405:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: low/High temperature bend test
- NF C20-740*NF EN 60068-2-40:2000 Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests
- NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.
- NF C93-400-11-2*NF EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Part 11-2 : climatic tests - Test 11b : combined/sequential cold, low air pressure and damp heat.
- NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
- NF T46-032:1977 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure(tr test).
- NF T46-032*NF ISO 2921:2020 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- NF T46-032:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test).
- NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
- NF A03-001-3*NF EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3 : method of test at low temperature
- NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
- NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
- NF G62-114:2002 Footwear - Test methods for uppers - High temperature behaviour.
- NF G62-130*NF EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour
Japanese Industrial Standards Committee (JISC), High and low temperature test chamber
- JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
- JIS D 0204:1967 Method of high and low temperature test for automobile parts
- JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
- JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
- JIS E 4035 AMD 1:2011 Railway rolling stock.High and low temperature test methods of parts (Amendment 1)
- JIS C 60068-2-1:2010 Environmental testing -- Part 2-1: Tests -- Test A: Cold
- JIS C 60068-2-40:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS C 0030:1995 Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests
- JIS C 60068-2-1:1995 Environmental testing procedures Part 2: Tests, Tests A: Cold
- JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
- JIS K 6261-4:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 4: Low-temperature retraction (TR test)
- JIS Z 2252:1991 Test methods for Vickers hardness at elevated temperatures
- JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- JIS C 5027:1975 Storage (low temperature) testing method for electronic components
- JIS C 60068-2-39:2004 Environmental testing -- Part 2: Tests. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
- JIS C 60068-3-1:1995 Background information, Section One -- Cold and dry heat tests
- JIS K 6261:1997 Low temperature testing methods for rubber, vulcanized or thermoplastic
- JIS L 0878:1995 Test methods for colour fastness to high temperature steaming
Professional Standard - Aerospace, High and low temperature test chamber
- QJ 20052-2011 Cryogenic test method for high pressure helium valve
- QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method
- QJ 1323.7-1987 Electromagnetic relay test method low temperature test
- QJ 1612-1989 Cryogenic valve medium test method
- QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
- QJ 1323.8-1987 Electromagnetic relay test method high temperature test
- QJ 2676A-2014 Test method for adsorption properties of adsorbents at low temperature and pressure
- QJ 2676-1994 Adsorbent low temperature and low pressure adsorption performance test method
- QJ 2675.2-1994 Performance test methods for cryogenic vessels - Outgassing rate test
- QJ 2675.4-1994 Performance test methods for low temperature containers daily evaporation rate test
- QJ 1238.2-1987 Low temperature test of cable test method on missile launch vehicle
- QJ 2675.1-1994 Low temperature container performance test method interlayer vacuum test
- QJ 1621-1989 Low temperature compression test method for rigid foamed plastics
- QJ 1620-1989 Low temperature tensile test method for rigid foamed plastics
- QJ 2675.3-1994 Cryogenic vessel performance test method Vacuum interlayer leak rate test
PT-IPQ, High and low temperature test chamber
- NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes
KR-KS, High and low temperature test chamber
- KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts
- KS V ISO 21159-2020 Butterfly valves for use in low temperature applications —Design and testing requirements
- KS M ISO 2921-2022 Rubber, vulcanized Determination of low temperature characteristics Temperature retraction procedure(TR test)
- KS V ISO 18139-2019 Globe valves for use in low temperature applications — Design and testing requirements
- KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- KS M ISO 17703-2019 Footwear－Test methods for uppers－High temperature behaviour
Military Standard of the People's Republic of China-General Armament Department, High and low temperature test chamber
- GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
- GJB 796.6-1990 High and low temperature test procedures for design and finalization of military fixed bridge beam equipment
- GJB 8709.20-2015 Rocket Launcher Test Methods Part 20: Low Temperature Test
- GJB 150.3-1986 Environmental test methods for military equipment High temperature test
- GJB 797.2-1990 Environmental test methods for mine blasting equipment - Low temperature test
- GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test
- GJB 983.5-1993 Military rubber film test method low temperature folding test
- GJB 595.3-1988 Environmental test methods for artillery optical instruments - low temperature test
- GJB 715.18-1990 Fastener test method high temperature double shear
- GJB 715.17-1990 Fastener Test Methods High Temperature Tensile
- GJB 2201-1994 Test methods for ultra-low temperature mechanical properties of metals
- GJB 8709.19-2015 Rocket Launcher Test Methods Part 19: High Temperature Test
- GJB 17.3-1984 Test methods for aviation wires and cables High temperature voltage test
- GJB 797.3-1990 Environmental test methods for mine blasting equipment High temperature test
- GJB 982.8-1990 Aviation brake tire test method High temperature resistance simulation test
- GJB 595.2-1988 Environmental test methods for artillery optical instruments High temperature test
- GJB 8671.13-2015 Test methods for metal cartridges Part 13: Low temperature strength test
Electronic Components, Assemblies and Materials Association, High and low temperature test chamber
(U.S.) Ford Automotive Standards, High and low temperature test chamber
British Standards Institution (BSI), High and low temperature test chamber
- BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
- BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
- BS EN 60068-3-1:1999 Environmental testing - Guidance - Cold and dry heat tests - Cold and dry heat tests
- BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
- BS 903-A29:1997 Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- BS EN 60068-2-39:1999 Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test
- BS EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
- BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
- BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
- BS EN 13519:2002 Footwear - Test methods for uppers - High temperature behaviour
- BS EN 60068-2-1:1993 Environmental testing - Test methods - Tests A. Cold
- BS EN ISO 17233:2003 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
- BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)
- BS EN ISO 6892-3:2015 Metallic materials. Tensile testing. Method of test at low temperature
- BS EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11j - Cold
Group Standards of the People's Republic of China, High and low temperature test chamber
- T/YH 1004-2020 Low temperature internal pressure test method of launch vehicle tank under liquid nitrogen medium
- T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
- T/JAR 005/2-2022 Testing method of energy efficiency for temperature shock test chamber
- T/JAR 005/1-2022 Testing method of energy efficiency for temperature shock test chamber
- T/CASME 62-2022 Technical specification for intelligent monitoring system of laboratory low temperature box
- T/CAS 263-2017 Rotational molding—Low temperature impact test
- T/HBJLXH 001-2023 Low temperature brittleness testing machine calibration method
- T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
- T/CGMA 0405-2022 Cryogenic valves for hydrogen — General test method
- T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
- T/CASME 787-2023 High and low temperature environment simulation device for automotive engine testing
- T/CSTM 00080-2019 Tensile testing method of metallic tubular goods in high temperature high pressure water
Guangdong Provincial Standard of the People's Republic of China, High and low temperature test chamber
- DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps
ES-AENOR, High and low temperature test chamber
Indonesia Standards, High and low temperature test chamber
Lithuanian Standards Office , High and low temperature test chamber
- LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- LST EN 13519-2002 Footwear - Test methods for uppers - High temperature behaviour
Danish Standards Foundation, High and low temperature test chamber
- DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- DS/ISO 2921:1979 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
- DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
- DS/EN 13519:2002 Footwear - Test method for uppers - High temperature behaviour
American Society for Testing and Materials (ASTM), High and low temperature test chamber
- ASTM G111-97 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- ASTM G111-97(2006) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- ASTM D832-92(1997) Standard Practice for Rubber Conditioning For Low-Temperature Testing
- ASTM D832-92(2001)e1 Standard Practice for Rubber Conditioning For Low-Temperature Testing
- ASTM G111-97(2013) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM E1072-85(1989)e1 Test Method for Low Temperature Breakdown of Iron Ores
- ASTM F2140-01 Standard Test Method for Performance of Hot Food Holding Cabinets
- ASTM F2140-01(2007) Standard Test Method for Performance of Hot Food Holding Cabinets
- ASTM F2140-11 Standard Test Method for Performance of Hot Food Holding Cabinets
- ASTM C411-11 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
- ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM C1211-98a Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
- ASTM E1491-97(2002) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM E1491-97 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
- ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
Jilin Provincial Standard of the People's Republic of China, High and low temperature test chamber
- DB22/T 2873-2018 Inspection methods for vacuum insulated cryogenic liquid tank containers
RO-ASRO, High and low temperature test chamber
International Organization for Standardization (ISO), High and low temperature test chamber
- ISO 15579:2000 Metallic materials - Tensile testing at low temperature
- ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- ISO 783:1999 Metallic materials - Tensile testing at elevated temperature
- ISO 783:1989 Metallic materials; tensile testing at elevated temperature
- ISO 7371:1995 Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods
- ISO 3383:1976 Rubber — General directions for achieving elevated or sub-normal temperatures for tests
- ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
- ISO 2921:1982 Rubber, vulcanized; Determination of low temperature characteristics; Temperature- retraction procedure (TR test)
- ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
- ISO/R 204:1961 Non-interrupted creep testing of steel at elevated temperatures
- ISO 13930:1998 Iron ores - Dynamic test for low-temperature reduction-disintegration
- ISO 4672:1978 Rubber products — Hoses — Low-temperature flexibility tests
- ISO 4672:1988 Rubber and plastics hoses; sub-ambient temperature flexibility tests
- ISO/R 203:1961 Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
- ISO 7371:1995/Amd 1:1997 Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs
- ISO 1496-2:1988 Series 1 freight containers; specification and testing; part 2: thermal containers
- ISO 1496-2:1996 Series 1 freight containers - Specification and testing - Part 2: Thermal containers
- ISO 1432:1976 Title missing - Legacy paper document
- ISO 2921:1975 Title missing - Legacy paper document
- ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
- ISO 4672:1997 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
- ISO 1432:1982 Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination
- ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
- ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
- ISO/R 205:1961 Determination of proof stress and proving test for steel at elevated temperature
- ISO 17703:2003 Footwear - Test methods for uppers - High temperature behaviour
Professional Standard - Chemical Industry, High and low temperature test chamber
- HG/T 2-163-1965 Plastic low temperature elongation test method
- HG/T 2-162-1965 Low temperature impact compression test method for plastics
- HG/T 4222-2011 The testing method of low temperature flexibility for hot melt adhesive
Henan Provincial Standard of the People's Republic of China, High and low temperature test chamber
Standard Association of Australia （SAA）, High and low temperature test chamber
- AS 2291:2020 Metallic materials — Tensile testing — Test at elevated temperature
- AS 60068.2.40:2003 Environmental testing - Tests - Test Z/AM: Combined cold/low air pressure tests
- AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AT-ON, High and low temperature test chamber
- ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
未注明发布机构, High and low temperature test chamber
- GJB 4.3-1983 Environmental testing of ship electronic equipment Low temperature testing
- GJB 150.4-1986 Environmental test methods for military equipment Low temperature test
- BS EN ISO 7371:1996(1999) Household refrigerating appliances — Refrigerators with or without low temperature compartment — Characteristicsandtest methods
- GJB 4.2-1983 Environmental testing of ship electronic equipment High temperature testing
- GJB 4.4-1983 Environmental testing of ship electronic equipment Low temperature storage testing
- GJB 150.6-1986 Environmental test methods for military equipment temperature-altitude test
VN-TCVN, High and low temperature test chamber
TH-TISI, High and low temperature test chamber
European Committee for Electrotechnical Standardization（CENELEC）, High and low temperature test chamber
- EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
- HD 323.2.40 S1-1988 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests
CENELEC - European Committee for Electrotechnical Standardization, High and low temperature test chamber
International Electrotechnical Commission (IEC), High and low temperature test chamber
GM Daewoo, High and low temperature test chamber
German Institute for Standardization, High and low temperature test chamber
- DIN EN 60068-2-40:2000 Environmental testing - Part 2: Tests; test Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40:1976 + A1:1983); German version EN 60068-2-40:1999
- DIN EN 60068-2-39:2000 Environmental testing - Part 2: Tests; test Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39:1976); German version EN 60068-2-39:1999
- DIN ISO 15579:2002 Metallic materials - Tensile testing at low temperature (ISO 15579:2000)
- DIN EN ISO 6892-3:2015-07 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015); German version EN ISO 6892-3:2015
- DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, High and low temperature test chamber
- GJB 6458.20-2008 Test method of rocket launcher. Part 20: Low temperature test
- GJB 5494.17-2005 Test method of rifle grenade Part 17:Test for high temperature and high humidity
- GJB 5389.16-2005 Test method of gun-launched missile Part 16:Low temperature test
- GJB 5389.15-2005 Test method of gun-launched missile Part 15:High temperature and high Humidity test
- GJB 6458.19-2008 Test method of rocket launcher. Part 19: High temperature test
- GJB 5895.19-2006 Test method for anti-tank missile Part 19: Low temperature test
- GJB 5389.18-2005 Test method of gun-launched missile Part 18:High temperature test
BE-NBN, High and low temperature test chamber
Professional Standard - Petrochemical Industry, High and low temperature test chamber
- SH/T 0211-1998 Rust preventive oils and greases.Test method of low temperature adhesive property
- SH/T 0644-1997 Test method for low temperature stability of aviation hydraulic oil
Professional Standard - Textile, High and low temperature test chamber
- FZ/T 01007-1991 Test method for low temperature resistance of coated fabrics
- FZ/T 01143-2018 Test method for low temperature folding resistance of coated fabrics
SE-SIS, High and low temperature test chamber
- SIS 11 23 15-1966 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
- SIS 11 23 15-1973 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
- SIS SS-ISO 2921:1990 Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)
- SIS SS 11 23 15-1982 Steel- Interruptedcreep testing at elevated temperatures(Load and temperature interrupted)
- SIS SS 11 23 12-1982 Steel- Creep-rupture testing at elevated temperatures
- SIS 11 23 12-1966 Creep-rupture testing of steel at elevated temperatures
- SIS 11 23 12-1973 Creep-rupture testing of steel at elevated temperatures
- SIS SS-ISO 4672:1990 Rubber and plastics hoses — Sub-ambient temperature flexibility tests
- MNC 323-1982 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1984 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1979 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing — Summary
- MNC 323-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1982 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1984 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
IN-BIS, High and low temperature test chamber
Canadian General Standards Board （CGSB), High and low temperature test chamber
JSAE - Society of Automotive Engineers of Japan@ Inc., High and low temperature test chamber
- JASO M331-1991 Low and medium temperature detergency test procedure for evaluating automobile gasoline engine oils
AR-IRAM, High and low temperature test chamber
Professional Standard - Electricity, High and low temperature test chamber
- DL/T 660-2007 Test procedure for the viscosity of coal ash in high-temperature
- DL/T 660-1998 Test procedure for coal ash high-temperature viscosity characteristic
- DL/T 2133-2020 Preventive test procedure for capacitive electroscope at low temperature
European Committee for Standardization (CEN), High and low temperature test chamber
- EN 13519:2001 Footwear - Test methods for uppers - High temperature behaviour
- EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
- EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
AENOR, High and low temperature test chamber
- UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)
- UNE-EN 13519:2002 Footwear - Test methods for uppers - High temperature behaviour.
ES-UNE, High and low temperature test chamber
- UNE-EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
Professional Standard - Building Materials, High and low temperature test chamber
- JC/T 2211-2014 Test method for conducting erosion resistant of fine ceramics at high temperature
Professional Standard - Public Safety Standards, High and low temperature test chamber
- GA 211-2009 High temperature-resistant test methods for smoke and heat exhaust ventilators
- GA 211-1999 High temperature-resistant test methods for fire fan in smoke-venting system
CEN - European Committee for Standardization, High and low temperature test chamber