ZH
RU
ES

Isotropic vs. Anisotropic

Isotropic vs. Anisotropic, Total:178 items.

In the international standard classification, Isotropic vs. Anisotropic involves: Waxes, bituminous materials and other petroleum products, Nuclear energy engineering, Products of non-ferrous metals, Reinforced plastics, Plastics, Electronic component assemblies, Iron and steel products, Bridge construction, Adhesives, Inorganic chemicals, Non-ferrous metals, Radiocommunications, Geology. Meteorology. Hydrology, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Water quality.

American Society for Testing and Materials (ASTM), Isotropic vs. Anisotropic

ASTM D721-15 Standard Test Method for Oil Content of Petroleum Waxes
ASTM D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
ASTM B1024/B1024M-23 Standard Specification for Isotropic Pure Molybdenum
ASTM D5920-96 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D5920/D5920M-20 Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D5850-20 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

RO-ASRO, Isotropic vs. Anisotropic

STAS 11526-1980 ELECTROTECHNICAL ISOTROPIC STEELS

ESDU - Engineering Sciences Data Unit, Isotropic vs. Anisotropic

ESDU 81047 C-1994 Buckling of flat rectangular plates (isotropic@ orthotropic and laminated composite plates and sandwich panels).
ESDU 88032 A-1991 Wrinkling of sandwich panel face plates (isotropic face plates on orthotropic cores@ in-plane loading or bending).
ESDU 90016 B-2011 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading)
ESDU 90016 B-1993 Natural frequencies of isotropic and orthotropic rectangular plates under static in-plane loading (including shear loading).
ESDU 00002-2011 Sound power radiation from isotropic plates
ESDU 80023 A-1995 Buckling of rectangular specially orthotropic plates.
ESDU 94005-1994 Buckling of flat rectangular orthotropic plates.
ESDU 00002-2000 Sound power radiation from isotropic plates.
ESDU 67025 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)
ESDU 67024 C-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges simply-supported.)
ESDU 68030 B-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges clamped.)
ESDU 78004 C-1995 Natural frequencies of thin-walled isotropic@ circular-cylindrical shells.
ESDU 68031 B-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and orthotropic cores of zero flexural stiffness@ all edges clamped.)
ESDU 98016 A-2003 Elastic buckling of flat isotropic stiffened panels and struts in compression
ESDU 98016-2000 Elastic buckling of flat isotropic stiffened panels and struts in compression
ESDU 98016 B-2008 Elastic buckling of flat isotropic stiffened panels and struts in compression.
ESDU 83036 B-1992 Natural frequencies of rectangular@ specially orthotropic laminated plates.
ESDU 83036 B-2012 Natural frequencies of rectangular@ specially orthotropic laminated plates
ESDU 83036 B-2011 Natural frequencies of rectangular@ specially orthotropic laminated plates
ESDU 72019 B-1994 Buckling of flat isotropic plates under uniaxial and biaxial loading.
ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.
ESDU 77003-1977 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; all edges clamped (isotropic face plates and orthotropic cores of zero flexural stiffness).
ESDU 76022-1976 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; long edges clamped@ short edges simply-supported (isotropic face plates and orthotropic cores of zero flexural stiffness).
ESDU 76013-1976 Elastic stresses and deflections under uniform pressure of flat rectangular sandwich panels; all edges simply-supported (isotropic face plates and orthotropic cores of zero flexural stiffness).
ESDU 01001-2001 Elasto-plastic buckling of flat isotropic stiffened panels and struts in compression
ESDU 01001 B-2008 Elasto-plastic buckling of flat isotropic stiffened panels and struts in compression.
ESDU 01001 A-2003 Elasto-plastic buckling of flat isotropic stiffened panels and struts in compression
ESDU 73007 A-1983 Stiffness of loaded flat strips under sinusoidally distributed bending couples at their edges (for use in local buckling calculations). (Uniaxial or biaxial loading. Isotropic or orthotropic materials.)
ESDU 94033-1994 Flat rectangular isotropic plates under uniformly distributed normal pressure. Elastic deflections@ stresses and strains@ moments and forces@ for various forms of edge restraint.
ESDU 02009-2011 Sound radiation from orthotropic rectangular plates Part I: Estimation by asymptotic method
ESDU 81018 B-1992 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions).
ESDU 81018 B-2011 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions)
ESDU 81018 B-2012 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions)
ESDU 09014-2009 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 09014 A-2013 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 69020 C-1993 Elastic stress concentration factors. Geometric discontinuities in flat bars or strips of isotropic materials.
ESDU 02009-2002 Sound radiation from orthotropic rectangular plates. Part I: estimation by asymptotic method.
ESDU 89048-1989 Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
ESDU 67032 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges simply-supported.)
ESDU 80027 C-1995 Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
ESDU 75006 A-1976 Design for maximum structural efficiency. Isotropic sandwich panels under uniaxial compression.
ESDU 68033 C-1994 Buckling loads under combined longitudinal and transverse direct stress of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges clamped.)
TM 71-1990 A Rayleigh-Ritz method of analysis for vibration of orthotropic plates under static in-plane loading (including shear)
ESDU 02010-2002 Sound radiation from orthotropic rectangular plates. Part II: validation by comparison with numerical and experimental results.
ESDU 72012 B-1978 Information on the use of Data Items on the buckling of plates and compression panels manufactured from isotropic materials.
ESDU 67026 C-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges simply-supported.)
ESDU 68032 B-1994 Buckling loads in shear of flat sandwich panels. (Isotropic face plates and corrugated cores@ all edges clamped.)
ESDU 85001 D-1995 Elastic stress and strain distributions around circular holes in infinite plates of orthotropic material (applicable to fibre reinforced composites).
ESDU 73015 A-1975 Estimation of the local buckling stress under biaxial compression of an isotropic skin with fibre reinforced integral unflanged stiffeners.

IX-SA, Isotropic vs. Anisotropic

AS 408:1972

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Isotropic vs. Anisotropic

GB/T 41967-2022 Anisotropic neodymium iron boron permanent magnetic powder
GB/T 1040.4-2006 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
GB/T 20564.5-2010 Continuously cold rolled high strength steel sheet and strip for automobile.Part 5:Isotropic steel
GB/T 20564.5-2022 Continuously cold rolled high strength steel sheet and strip for automobile—Part 5: Isotropic steel

PL-PKN, Isotropic vs. Anisotropic

PN H92124-1987 Steel Electrical anisotropic sheet ' and strip

Standard Association of Australia （SAA）, Isotropic vs. Anisotropic

AS 1145.4:2001 Determination of tensile properties of plastics materials - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Group Standards of the People's Republic of China, Isotropic vs. Anisotropic

T/SBX 040-2020 Determination of Optical Anisotropy of Nematic Thermotropic Liquid Crystals
T/CHTS 20016-2021 Anisotropic Friction Pendulum Seismic Isolation Bearing for Highway Bridges
T/BMCA 002-2022 Technical specification for test of isotropic electrically conductive adhesive
T/CNIA 0066-2020 Green Design Product Evaluation Technical Specification Isotropic NdFeB Quick Quenching Magnetic Powder

AASHTO - American Association of State Highway and Transportation Officials, Isotropic vs. Anisotropic

DIVISION I 10.60-1996 Orthotropic Superstructures (Interim 2000)
DIVISION I 10.41-1996 Orthotropic-Deck Superstructures (Interim 2000)

VN-TCVN, Isotropic vs. Anisotropic

TCVN 4501-4-2009 Plastics.Determination of tensile properties.Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Danish Standards Foundation, Isotropic vs. Anisotropic

DS/EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites

Association Francaise de Normalisation, Isotropic vs. Anisotropic

NF T51-034-4*NF EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites
NF EN ISO 527-4:2023 Plastiques - Détermination des propriétés en traction - Partie 4 : conditions d'essai pour les composites plastiques renforcés de fibres isotropes et orthotropes
NF T51-034-4:1997 Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
NF ISO 16525-3:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 3 : détermination des propriétés de transfert de chaleur
NF T76-100-3*NF ISO 16525-3:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 3 : determination of heat-transfer properties
UTE C26-295U-1999 Measurement of microwave permittivity and permeability of homogeneous and lossy isotropic materials. Method of measurement for circular coaxial guide.
NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales
NF ISO 16525-7:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 7 : méthodes d'essai environnemental
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF T76-100-1*NF ISO 16525-1:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 1 : general test methods
NF T76-100-7*NF ISO 16525-7:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 7 : environmental test methods
NF ISO 16525-5:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 5 : détermination de la fatigue par cisaillement
NF ISO 16525-9:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 9 : détermination des propriétés de transmission de signal à haute vitesse
NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy
NF ISO 16525-6:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 6 : détermination de la résistance au choc du type pendule
NF T76-100-9*NF ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9 : determination of high-speed signal-transmission characteristics
NF T76-100-5*NF ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5 : determination of shear fatigue
NF ISO 16525-8:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 8 : méthodes d'essai de migration électrochimique
NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
NF T76-100-8*NF ISO 16525-8:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 8 : electrochemical-migration test methods
NF T76-100-2*NF ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2 : determination of electrical characteristics for use in electronic assemblies
NF T76-100-6*NF ISO 16525-6:2014 Adhesives - Test methods for electrically isotropic conductive adhesives - Part 6 : determination pendulum-type shear impact
NF ISO 16525-4:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 4 : détermination de la résistance au cisaillement et de la résistance électrique des assemblages collés rigide sur rigide

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Isotropic vs. Anisotropic

IPC 3408-1996 General Requirements for Anisotropically Conductive Adhesive Films

IPC - Association Connecting Electronics Industries, Isotropic vs. Anisotropic

IPC 3408 CD-1996 General Requirements for Anisotropically Conductive Adhesive Films

ES-UNE, Isotropic vs. Anisotropic

UNE-EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

British Standards Institution (BSI), Isotropic vs. Anisotropic

BS EN ISO 527-4:2023 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
20/30409900 DC BS EN ISO 527-4. Plastics. Determination of tensile properties. Part 4. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of heat-transfer properties
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. General test methods
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high-speed signal-transmission characteristics
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS PD ISO/TR 16379:2014 Tissue-engineered medical products. Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
PD ISO/TR 16379:2014 Tissue-engineered medical products. Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging

AENOR, Isotropic vs. Anisotropic

UNE-EN ISO 527-4:1997 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES (ISO 527-4:1997).
UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE-EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)

RU-GOST R, Isotropic vs. Anisotropic

GOST 21427.1-1983 Cold-rolled anisotropic electrical-sheet steel. Specifications
GOST 21427.4-1978 Cold-rolled steel electrical anisotropic strip. Specifications
GOST 21427.2-1983 Cold-rolled isotropic electrical-sheet steel. Specifications

German Institute for Standardization, Isotropic vs. Anisotropic

DIN EN ISO 527-4:2023-07 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
DIN EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

CZ-CSN, Isotropic vs. Anisotropic

CSN 42 0234-1988 Cold-rolled electrotechnical isotropic thin-sheet and strips steel
CSN 42 0409-1970 Testing of anizotropy of aluminium and aluminium alloy sheets (cup method)
CSN 42 6314-1988 Cold rolled anisotropic steel sheat and strip for electrical engineering. Dimensions
CSN 42 6341-1988 Cold rolled anisotropic steel sheat and strip for electrical engineering. Dimensions
CSN 42 0231-1988 Cold rolled anisotropic steel sheet and strip for electrical engineering. Technical delivery requirements

AGMA - American Gear Manufacturers Association, Isotropic vs. Anisotropic

06FTM02-2006 Isotropic Superfinishing of S--76C+ Main Transmission Gears
05FTM13-2005 Evaluation of the Scuffing Resistance of Isotropic Superfinished Precision Gears

(U.S.) Ford Automotive Standards, Isotropic vs. Anisotropic

FORD WSF-M4L8-A1-2012 MAGNET, PERMANENT, THERMOPLASTIC BONDED, ISOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Energy, Isotropic vs. Anisotropic

NB/T 10842-2021 Measuring method of shale stress direction Viscous remanence-wave velocity anisotropy

ES-AENOR, Isotropic vs. Anisotropic

UNE 36-404-1988

Japanese Industrial Standards Committee (JISC), Isotropic vs. Anisotropic

JIS K 7164:2005 Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
JIS K 7080-2:2012 Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates

WRC - Welding Research Council, Isotropic vs. Anisotropic

BULLETIN 40-1958 DESIGN OF A THIN-WALLED CYLINDRICAL PRESSURE VESSEL BASED UPON THE PLASTIC RANGE AND CONSIDERING ANISOTROPHY

American Welding Society (AWS), Isotropic vs. Anisotropic

WRC 040:1958 Design of a Thin-Walled Cylindrical Pressure Vessel Based Upon The Plastic Range and Considering Anisotropy

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Isotropic vs. Anisotropic

GB/T 35494.1-2017 Test methods for isotropic electrically conductive adhesives—Part 1:General test methods

Korean Agency for Technology and Standards (KATS), Isotropic vs. Anisotropic

KS M ISO 527-4-2002(2022) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS M ISO 527-4-2002(2017) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS C IEC 60404-6-2015(2020) Magnetic materials－Part 6：Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4

International Organization for Standardization (ISO), Isotropic vs. Anisotropic

ISO 527-4:2023 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-4:2021 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 16525-3:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 3: Determination of heat-transfer properties
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 16525-1:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 1: General test methods
ISO 16525-7:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 7: Environmental test methods
ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9: Determination of high-speed signal-transmission characteristics
ISO/TR 16379:2014 Tissue-engineered medical products - Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5: Determination of shear fatigue
ISO 294-5:2001/Cor 1:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Technical Corrigendum 1
ISO 294-5:2001/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Amendment 1
ISO 16525-8:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 8: Electrochemical-migration test methods
ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2: Determination of electrical characteristics for use in electronic assemblies
ISO 16525-6:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 6: Determination of pendulum-type shear impact

International Telecommunication Union (ITU), Isotropic vs. Anisotropic

ITU-R SF.1004-1993 Maximum Equivalent Isotropically Radiated Power Transmitted Towards the Horizon by Earth Stations of the Fixed-Satellite Service Sharing Frequency Bands with the Fixed Service
ITU-R SF.406-8-1993 Maximum Equivalent Isotropically Radiated Power of Radio-Relay System Transmitters Operating in the Frequency Bands Shared with the Fixed-Satellite Service

IX-UIC, Isotropic vs. Anisotropic

UIC R 778-1-2011 Recommendations for the consideration of fatigue in the design of steel railway bridges, especially with orthotropic decks

European Committee for Standardization (CEN), Isotropic vs. Anisotropic

prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

American Society of Civil Engineers (ASCE), Isotropic vs. Anisotropic

ASCE 54-10-2010 Standard Guideline for the Geostatistical Estimation and Block-Averaging of Homogeneous and Isotropic Saturated Hydraulic Conductivity

国家市场监督管理总局、中国国家标准化管理委员会, Isotropic vs. Anisotropic

GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

未注明发布机构, Isotropic vs. Anisotropic

BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy

Lithuanian Standards Office , Isotropic vs. Anisotropic

LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites

The American Road & Transportation Builders Association, Isotropic vs. Anisotropic

AASHTO DIVISION I 10.41 Orthotropic-Deck Superstructures Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)